[PATCH 0/8] ath10k: boot, bmi and mac debug message cleanup

All of lore.kernel.org
 help / color / mirror / Atom feed

* [PATCH 0/8] ath10k: boot, bmi and mac debug message cleanup
@ 2013-09-08 14:55 ` Kalle Valo
  0 siblings, 0 replies; 20+ messages in thread
From: Kalle Valo @ 2013-09-08 14:55 UTC (permalink / raw)
  To: ath10k; +Cc: linux-wireless

Simple message log cleanup. Please review.

---

Kalle Valo (8):
      ath10k: add BMI log level
      ath10k: rename ATH10K_DBG_CORE to BOOT
      ath10k: cleanup debug messages in core.c
      ath10k: add boot debug messages to pci.c and ce.c
      ath10k: add boot debug messages to htc.c
      ath10k: add boot messages to htt.c
      ath10k: clean mac.c debug messages
      ath10k: print phymode as a string


 drivers/net/wireless/ath/ath10k/bmi.c    |   42 ++++---
 drivers/net/wireless/ath/ath10k/ce.c     |    8 +
 drivers/net/wireless/ath/ath10k/core.c   |   11 +-
 drivers/net/wireless/ath/ath10k/debug.h  |    3 
 drivers/net/wireless/ath/ath10k/htc.c    |   16 +--
 drivers/net/wireless/ath/ath10k/htt_rx.c |    2 
 drivers/net/wireless/ath/ath10k/htt_tx.c |    2 
 drivers/net/wireless/ath/ath10k/mac.c    |  185 ++++++++++++++++--------------
 drivers/net/wireless/ath/ath10k/pci.c    |    6 +
 drivers/net/wireless/ath/ath10k/wmi.h    |   42 +++++++
 10 files changed, 197 insertions(+), 120 deletions(-)


_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

^ permalink raw reply	[flat|nested] 20+ messages in thread

* [PATCH 0/8] ath10k: boot, bmi and mac debug message cleanup
@ 2013-09-08 14:55 ` Kalle Valo
  0 siblings, 0 replies; 20+ messages in thread
From: Kalle Valo @ 2013-09-08 14:55 UTC (permalink / raw)
  To: ath10k; +Cc: linux-wireless

Simple message log cleanup. Please review.

---

Kalle Valo (8):
      ath10k: add BMI log level
      ath10k: rename ATH10K_DBG_CORE to BOOT
      ath10k: cleanup debug messages in core.c
      ath10k: add boot debug messages to pci.c and ce.c
      ath10k: add boot debug messages to htc.c
      ath10k: add boot messages to htt.c
      ath10k: clean mac.c debug messages
      ath10k: print phymode as a string


 drivers/net/wireless/ath/ath10k/bmi.c    |   42 ++++---
 drivers/net/wireless/ath/ath10k/ce.c     |    8 +
 drivers/net/wireless/ath/ath10k/core.c   |   11 +-
 drivers/net/wireless/ath/ath10k/debug.h  |    3 
 drivers/net/wireless/ath/ath10k/htc.c    |   16 +--
 drivers/net/wireless/ath/ath10k/htt_rx.c |    2 
 drivers/net/wireless/ath/ath10k/htt_tx.c |    2 
 drivers/net/wireless/ath/ath10k/mac.c    |  185 ++++++++++++++++--------------
 drivers/net/wireless/ath/ath10k/pci.c    |    6 +
 drivers/net/wireless/ath/ath10k/wmi.h    |   42 +++++++
 10 files changed, 197 insertions(+), 120 deletions(-)


^ permalink raw reply	[flat|nested] 20+ messages in thread

* [PATCH 1/8] ath10k: add BMI log level
  2013-09-08 14:55 ` Kalle Valo
@ 2013-09-08 14:55   ` Kalle Valo
  -1 siblings, 0 replies; 20+ messages in thread
From: Kalle Valo @ 2013-09-08 14:55 UTC (permalink / raw)
  To: ath10k; +Cc: linux-wireless

Also clean BMI log messages and add few more.

Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/bmi.c   |   42 ++++++++++++++++++++-----------
 drivers/net/wireless/ath/ath10k/debug.h |    1 +
 2 files changed, 28 insertions(+), 15 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/bmi.c b/drivers/net/wireless/ath/ath10k/bmi.c
index 744da6d..a1f0996 100644
--- a/drivers/net/wireless/ath/ath10k/bmi.c
+++ b/drivers/net/wireless/ath/ath10k/bmi.c
@@ -22,7 +22,8 @@
 
 void ath10k_bmi_start(struct ath10k *ar)
 {
-	ath10k_dbg(ATH10K_DBG_CORE, "BMI started\n");
+	ath10k_dbg(ATH10K_DBG_BMI, "bmi start\n");
+
 	ar->bmi.done_sent = false;
 }
 
@@ -32,8 +33,10 @@ int ath10k_bmi_done(struct ath10k *ar)
 	u32 cmdlen = sizeof(cmd.id) + sizeof(cmd.done);
 	int ret;
 
+	ath10k_dbg(ATH10K_DBG_BMI, "bmi done\n");
+
 	if (ar->bmi.done_sent) {
-		ath10k_dbg(ATH10K_DBG_CORE, "%s skipped\n", __func__);
+		ath10k_dbg(ATH10K_DBG_BMI, "bmi skipped\n");
 		return 0;
 	}
 
@@ -46,7 +49,6 @@ int ath10k_bmi_done(struct ath10k *ar)
 		return ret;
 	}
 
-	ath10k_dbg(ATH10K_DBG_CORE, "BMI done\n");
 	return 0;
 }
 
@@ -59,6 +61,8 @@ int ath10k_bmi_get_target_info(struct ath10k *ar,
 	u32 resplen = sizeof(resp.get_target_info);
 	int ret;
 
+	ath10k_dbg(ATH10K_DBG_BMI, "bmi get target info\n");
+
 	if (ar->bmi.done_sent) {
 		ath10k_warn("BMI Get Target Info Command disallowed\n");
 		return -EBUSY;
@@ -80,6 +84,7 @@ int ath10k_bmi_get_target_info(struct ath10k *ar,
 
 	target_info->version = __le32_to_cpu(resp.get_target_info.version);
 	target_info->type    = __le32_to_cpu(resp.get_target_info.type);
+
 	return 0;
 }
 
@@ -92,15 +97,14 @@ int ath10k_bmi_read_memory(struct ath10k *ar,
 	u32 rxlen;
 	int ret;
 
+	ath10k_dbg(ATH10K_DBG_BMI, "bmi read address 0x%x length %d\n",
+		   address, length);
+
 	if (ar->bmi.done_sent) {
 		ath10k_warn("command disallowed\n");
 		return -EBUSY;
 	}
 
-	ath10k_dbg(ATH10K_DBG_CORE,
-		   "%s: (device: 0x%p, address: 0x%x, length: %d)\n",
-		   __func__, ar, address, length);
-
 	while (length) {
 		rxlen = min_t(u32, length, BMI_MAX_DATA_SIZE);
 
@@ -133,15 +137,14 @@ int ath10k_bmi_write_memory(struct ath10k *ar,
 	u32 txlen;
 	int ret;
 
+	ath10k_dbg(ATH10K_DBG_BMI, "bmi write address 0x%x length %d\n",
+		   address, length);
+
 	if (ar->bmi.done_sent) {
 		ath10k_warn("command disallowed\n");
 		return -EBUSY;
 	}
 
-	ath10k_dbg(ATH10K_DBG_CORE,
-		   "%s: (device: 0x%p, address: 0x%x, length: %d)\n",
-		   __func__, ar, address, length);
-
 	while (length) {
 		txlen = min(length, BMI_MAX_DATA_SIZE - hdrlen);
 
@@ -180,15 +183,14 @@ int ath10k_bmi_execute(struct ath10k *ar, u32 address, u32 *param)
 	u32 resplen = sizeof(resp.execute);
 	int ret;
 
+	ath10k_dbg(ATH10K_DBG_BMI, "bmi execute address 0x%x param 0x%x\n",
+		   address, *param);
+
 	if (ar->bmi.done_sent) {
 		ath10k_warn("command disallowed\n");
 		return -EBUSY;
 	}
 
-	ath10k_dbg(ATH10K_DBG_CORE,
-		   "%s: (device: 0x%p, address: 0x%x, param: %d)\n",
-		   __func__, ar, address, *param);
-
 	cmd.id            = __cpu_to_le32(BMI_EXECUTE);
 	cmd.execute.addr  = __cpu_to_le32(address);
 	cmd.execute.param = __cpu_to_le32(*param);
@@ -216,6 +218,9 @@ int ath10k_bmi_lz_data(struct ath10k *ar, const void *buffer, u32 length)
 	u32 txlen;
 	int ret;
 
+	ath10k_dbg(ATH10K_DBG_BMI, "bmi lz data buffer 0x%p length %d\n",
+		   buffer, length);
+
 	if (ar->bmi.done_sent) {
 		ath10k_warn("command disallowed\n");
 		return -EBUSY;
@@ -250,6 +255,9 @@ int ath10k_bmi_lz_stream_start(struct ath10k *ar, u32 address)
 	u32 cmdlen = sizeof(cmd.id) + sizeof(cmd.lz_start);
 	int ret;
 
+	ath10k_dbg(ATH10K_DBG_BMI, "bmi lz stream start address 0x%x\n",
+		   address);
+
 	if (ar->bmi.done_sent) {
 		ath10k_warn("command disallowed\n");
 		return -EBUSY;
@@ -275,6 +283,10 @@ int ath10k_bmi_fast_download(struct ath10k *ar,
 	u32 trailer_len = length - head_len;
 	int ret;
 
+	ath10k_dbg(ATH10K_DBG_BMI,
+		   "bmi fast download address 0x%x buffer 0x%p length %d\n",
+		   address, buffer, length);
+
 	ret = ath10k_bmi_lz_stream_start(ar, address);
 	if (ret)
 		return ret;
diff --git a/drivers/net/wireless/ath/ath10k/debug.h b/drivers/net/wireless/ath/ath10k/debug.h
index 9c442a8..dfa3070 100644
--- a/drivers/net/wireless/ath/ath10k/debug.h
+++ b/drivers/net/wireless/ath/ath10k/debug.h
@@ -32,6 +32,7 @@ enum ath10k_debug_mask {
 	ATH10K_DBG_HTT_DUMP	= 0x00000080,
 	ATH10K_DBG_MGMT		= 0x00000100,
 	ATH10K_DBG_DATA		= 0x00000200,
+	ATH10K_DBG_BMI		= 0x00000400,
 	ATH10K_DBG_ANY		= 0xffffffff,
 };
 


_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

^ permalink raw reply related	[flat|nested] 20+ messages in thread

* [PATCH 1/8] ath10k: add BMI log level
@ 2013-09-08 14:55   ` Kalle Valo
  0 siblings, 0 replies; 20+ messages in thread
From: Kalle Valo @ 2013-09-08 14:55 UTC (permalink / raw)
  To: ath10k; +Cc: linux-wireless

Also clean BMI log messages and add few more.

Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/bmi.c   |   42 ++++++++++++++++++++-----------
 drivers/net/wireless/ath/ath10k/debug.h |    1 +
 2 files changed, 28 insertions(+), 15 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/bmi.c b/drivers/net/wireless/ath/ath10k/bmi.c
index 744da6d..a1f0996 100644
--- a/drivers/net/wireless/ath/ath10k/bmi.c
+++ b/drivers/net/wireless/ath/ath10k/bmi.c
@@ -22,7 +22,8 @@
 
 void ath10k_bmi_start(struct ath10k *ar)
 {
-	ath10k_dbg(ATH10K_DBG_CORE, "BMI started\n");
+	ath10k_dbg(ATH10K_DBG_BMI, "bmi start\n");
+
 	ar->bmi.done_sent = false;
 }
 
@@ -32,8 +33,10 @@ int ath10k_bmi_done(struct ath10k *ar)
 	u32 cmdlen = sizeof(cmd.id) + sizeof(cmd.done);
 	int ret;
 
+	ath10k_dbg(ATH10K_DBG_BMI, "bmi done\n");
+
 	if (ar->bmi.done_sent) {
-		ath10k_dbg(ATH10K_DBG_CORE, "%s skipped\n", __func__);
+		ath10k_dbg(ATH10K_DBG_BMI, "bmi skipped\n");
 		return 0;
 	}
 
@@ -46,7 +49,6 @@ int ath10k_bmi_done(struct ath10k *ar)
 		return ret;
 	}
 
-	ath10k_dbg(ATH10K_DBG_CORE, "BMI done\n");
 	return 0;
 }
 
@@ -59,6 +61,8 @@ int ath10k_bmi_get_target_info(struct ath10k *ar,
 	u32 resplen = sizeof(resp.get_target_info);
 	int ret;
 
+	ath10k_dbg(ATH10K_DBG_BMI, "bmi get target info\n");
+
 	if (ar->bmi.done_sent) {
 		ath10k_warn("BMI Get Target Info Command disallowed\n");
 		return -EBUSY;
@@ -80,6 +84,7 @@ int ath10k_bmi_get_target_info(struct ath10k *ar,
 
 	target_info->version = __le32_to_cpu(resp.get_target_info.version);
 	target_info->type    = __le32_to_cpu(resp.get_target_info.type);
+
 	return 0;
 }
 
@@ -92,15 +97,14 @@ int ath10k_bmi_read_memory(struct ath10k *ar,
 	u32 rxlen;
 	int ret;
 
+	ath10k_dbg(ATH10K_DBG_BMI, "bmi read address 0x%x length %d\n",
+		   address, length);
+
 	if (ar->bmi.done_sent) {
 		ath10k_warn("command disallowed\n");
 		return -EBUSY;
 	}
 
-	ath10k_dbg(ATH10K_DBG_CORE,
-		   "%s: (device: 0x%p, address: 0x%x, length: %d)\n",
-		   __func__, ar, address, length);
-
 	while (length) {
 		rxlen = min_t(u32, length, BMI_MAX_DATA_SIZE);
 
@@ -133,15 +137,14 @@ int ath10k_bmi_write_memory(struct ath10k *ar,
 	u32 txlen;
 	int ret;
 
+	ath10k_dbg(ATH10K_DBG_BMI, "bmi write address 0x%x length %d\n",
+		   address, length);
+
 	if (ar->bmi.done_sent) {
 		ath10k_warn("command disallowed\n");
 		return -EBUSY;
 	}
 
-	ath10k_dbg(ATH10K_DBG_CORE,
-		   "%s: (device: 0x%p, address: 0x%x, length: %d)\n",
-		   __func__, ar, address, length);
-
 	while (length) {
 		txlen = min(length, BMI_MAX_DATA_SIZE - hdrlen);
 
@@ -180,15 +183,14 @@ int ath10k_bmi_execute(struct ath10k *ar, u32 address, u32 *param)
 	u32 resplen = sizeof(resp.execute);
 	int ret;
 
+	ath10k_dbg(ATH10K_DBG_BMI, "bmi execute address 0x%x param 0x%x\n",
+		   address, *param);
+
 	if (ar->bmi.done_sent) {
 		ath10k_warn("command disallowed\n");
 		return -EBUSY;
 	}
 
-	ath10k_dbg(ATH10K_DBG_CORE,
-		   "%s: (device: 0x%p, address: 0x%x, param: %d)\n",
-		   __func__, ar, address, *param);
-
 	cmd.id            = __cpu_to_le32(BMI_EXECUTE);
 	cmd.execute.addr  = __cpu_to_le32(address);
 	cmd.execute.param = __cpu_to_le32(*param);
@@ -216,6 +218,9 @@ int ath10k_bmi_lz_data(struct ath10k *ar, const void *buffer, u32 length)
 	u32 txlen;
 	int ret;
 
+	ath10k_dbg(ATH10K_DBG_BMI, "bmi lz data buffer 0x%p length %d\n",
+		   buffer, length);
+
 	if (ar->bmi.done_sent) {
 		ath10k_warn("command disallowed\n");
 		return -EBUSY;
@@ -250,6 +255,9 @@ int ath10k_bmi_lz_stream_start(struct ath10k *ar, u32 address)
 	u32 cmdlen = sizeof(cmd.id) + sizeof(cmd.lz_start);
 	int ret;
 
+	ath10k_dbg(ATH10K_DBG_BMI, "bmi lz stream start address 0x%x\n",
+		   address);
+
 	if (ar->bmi.done_sent) {
 		ath10k_warn("command disallowed\n");
 		return -EBUSY;
@@ -275,6 +283,10 @@ int ath10k_bmi_fast_download(struct ath10k *ar,
 	u32 trailer_len = length - head_len;
 	int ret;
 
+	ath10k_dbg(ATH10K_DBG_BMI,
+		   "bmi fast download address 0x%x buffer 0x%p length %d\n",
+		   address, buffer, length);
+
 	ret = ath10k_bmi_lz_stream_start(ar, address);
 	if (ret)
 		return ret;
diff --git a/drivers/net/wireless/ath/ath10k/debug.h b/drivers/net/wireless/ath/ath10k/debug.h
index 9c442a8..dfa3070 100644
--- a/drivers/net/wireless/ath/ath10k/debug.h
+++ b/drivers/net/wireless/ath/ath10k/debug.h
@@ -32,6 +32,7 @@ enum ath10k_debug_mask {
 	ATH10K_DBG_HTT_DUMP	= 0x00000080,
 	ATH10K_DBG_MGMT		= 0x00000100,
 	ATH10K_DBG_DATA		= 0x00000200,
+	ATH10K_DBG_BMI		= 0x00000400,
 	ATH10K_DBG_ANY		= 0xffffffff,
 };
 


^ permalink raw reply related	[flat|nested] 20+ messages in thread

* [PATCH 2/8] ath10k: rename ATH10K_DBG_CORE to BOOT
  2013-09-08 14:55 ` Kalle Valo
@ 2013-09-08 14:55   ` Kalle Valo
  -1 siblings, 0 replies; 20+ messages in thread
From: Kalle Valo @ 2013-09-08 14:55 UTC (permalink / raw)
  To: ath10k; +Cc: linux-wireless

core.c mostly deals with driver and firmware starting related
actions. And we can use the boot level also in other components,
like PCI and HTT.

Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/core.c  |    6 +++---
 drivers/net/wireless/ath/ath10k/debug.h |    2 +-
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index 8a68839..0ed60fd 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -53,7 +53,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 
 static void ath10k_send_suspend_complete(struct ath10k *ar)
 {
-	ath10k_dbg(ATH10K_DBG_CORE, "%s\n", __func__);
+	ath10k_dbg(ATH10K_DBG_BOOT, "%s\n", __func__);
 
 	ar->is_target_paused = true;
 	wake_up(&ar->event_queue);
@@ -101,7 +101,7 @@ static int ath10k_init_connect_htc(struct ath10k *ar)
 		goto timeout;
 	}
 
-	ath10k_dbg(ATH10K_DBG_CORE, "core wmi ready\n");
+	ath10k_dbg(ATH10K_DBG_BOOT, "core wmi ready\n");
 	return 0;
 
 timeout:
@@ -203,7 +203,7 @@ static int ath10k_push_board_ext_data(struct ath10k *ar,
 		return ret;
 	}
 
-	ath10k_dbg(ATH10K_DBG_CORE,
+	ath10k_dbg(ATH10K_DBG_BOOT,
 		   "ath10k: Board extended Data download addr: 0x%x\n",
 		   board_ext_data_addr);
 
diff --git a/drivers/net/wireless/ath/ath10k/debug.h b/drivers/net/wireless/ath/ath10k/debug.h
index dfa3070..4bef061 100644
--- a/drivers/net/wireless/ath/ath10k/debug.h
+++ b/drivers/net/wireless/ath/ath10k/debug.h
@@ -27,7 +27,7 @@ enum ath10k_debug_mask {
 	ATH10K_DBG_HTC		= 0x00000004,
 	ATH10K_DBG_HTT		= 0x00000008,
 	ATH10K_DBG_MAC		= 0x00000010,
-	ATH10K_DBG_CORE		= 0x00000020,
+	ATH10K_DBG_BOOT		= 0x00000020,
 	ATH10K_DBG_PCI_DUMP	= 0x00000040,
 	ATH10K_DBG_HTT_DUMP	= 0x00000080,
 	ATH10K_DBG_MGMT		= 0x00000100,


_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

^ permalink raw reply related	[flat|nested] 20+ messages in thread

* [PATCH 2/8] ath10k: rename ATH10K_DBG_CORE to BOOT
@ 2013-09-08 14:55   ` Kalle Valo
  0 siblings, 0 replies; 20+ messages in thread
From: Kalle Valo @ 2013-09-08 14:55 UTC (permalink / raw)
  To: ath10k; +Cc: linux-wireless

core.c mostly deals with driver and firmware starting related
actions. And we can use the boot level also in other components,
like PCI and HTT.

Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/core.c  |    6 +++---
 drivers/net/wireless/ath/ath10k/debug.h |    2 +-
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index 8a68839..0ed60fd 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -53,7 +53,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 
 static void ath10k_send_suspend_complete(struct ath10k *ar)
 {
-	ath10k_dbg(ATH10K_DBG_CORE, "%s\n", __func__);
+	ath10k_dbg(ATH10K_DBG_BOOT, "%s\n", __func__);
 
 	ar->is_target_paused = true;
 	wake_up(&ar->event_queue);
@@ -101,7 +101,7 @@ static int ath10k_init_connect_htc(struct ath10k *ar)
 		goto timeout;
 	}
 
-	ath10k_dbg(ATH10K_DBG_CORE, "core wmi ready\n");
+	ath10k_dbg(ATH10K_DBG_BOOT, "core wmi ready\n");
 	return 0;
 
 timeout:
@@ -203,7 +203,7 @@ static int ath10k_push_board_ext_data(struct ath10k *ar,
 		return ret;
 	}
 
-	ath10k_dbg(ATH10K_DBG_CORE,
+	ath10k_dbg(ATH10K_DBG_BOOT,
 		   "ath10k: Board extended Data download addr: 0x%x\n",
 		   board_ext_data_addr);
 
diff --git a/drivers/net/wireless/ath/ath10k/debug.h b/drivers/net/wireless/ath/ath10k/debug.h
index dfa3070..4bef061 100644
--- a/drivers/net/wireless/ath/ath10k/debug.h
+++ b/drivers/net/wireless/ath/ath10k/debug.h
@@ -27,7 +27,7 @@ enum ath10k_debug_mask {
 	ATH10K_DBG_HTC		= 0x00000004,
 	ATH10K_DBG_HTT		= 0x00000008,
 	ATH10K_DBG_MAC		= 0x00000010,
-	ATH10K_DBG_CORE		= 0x00000020,
+	ATH10K_DBG_BOOT		= 0x00000020,
 	ATH10K_DBG_PCI_DUMP	= 0x00000040,
 	ATH10K_DBG_HTT_DUMP	= 0x00000080,
 	ATH10K_DBG_MGMT		= 0x00000100,


^ permalink raw reply related	[flat|nested] 20+ messages in thread

* [PATCH 3/8] ath10k: cleanup debug messages in core.c
  2013-09-08 14:55 ` Kalle Valo
@ 2013-09-08 14:55   ` Kalle Valo
  -1 siblings, 0 replies; 20+ messages in thread
From: Kalle Valo @ 2013-09-08 14:55 UTC (permalink / raw)
  To: ath10k; +Cc: linux-wireless

Fix them to follow the general logging style in ath10k.

While at it, add print id chip_id to the debug log.

Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/core.c |    9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index 0ed60fd..76906d5 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -53,7 +53,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 
 static void ath10k_send_suspend_complete(struct ath10k *ar)
 {
-	ath10k_dbg(ATH10K_DBG_BOOT, "%s\n", __func__);
+	ath10k_dbg(ATH10K_DBG_BOOT, "boot suspend complete\n");
 
 	ar->is_target_paused = true;
 	wake_up(&ar->event_queue);
@@ -101,7 +101,7 @@ static int ath10k_init_connect_htc(struct ath10k *ar)
 		goto timeout;
 	}
 
-	ath10k_dbg(ATH10K_DBG_BOOT, "core wmi ready\n");
+	ath10k_dbg(ATH10K_DBG_BOOT, "boot wmi ready\n");
 	return 0;
 
 timeout:
@@ -204,7 +204,7 @@ static int ath10k_push_board_ext_data(struct ath10k *ar,
 	}
 
 	ath10k_dbg(ATH10K_DBG_BOOT,
-		   "ath10k: Board extended Data download addr: 0x%x\n",
+		   "boot push board extended data addr 0x%x\n",
 		   board_ext_data_addr);
 
 	if (board_ext_data_addr == 0)
@@ -722,6 +722,9 @@ static int ath10k_core_check_chip_id(struct ath10k *ar)
 {
 	u32 hw_revision = MS(ar->chip_id, SOC_CHIP_ID_REV);
 
+	ath10k_dbg(ATH10K_DBG_BOOT, "boot chip_id 0x%08x hw_revision 0x%x\n",
+		   ar->chip_id, hw_revision);
+
 	/* Check that we are not using hw1.0 (some of them have same pci id
 	 * as hw2.0) before doing anything else as ath10k crashes horribly
 	 * due to missing hw1.0 workarounds. */


_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

^ permalink raw reply related	[flat|nested] 20+ messages in thread

* [PATCH 3/8] ath10k: cleanup debug messages in core.c
@ 2013-09-08 14:55   ` Kalle Valo
  0 siblings, 0 replies; 20+ messages in thread
From: Kalle Valo @ 2013-09-08 14:55 UTC (permalink / raw)
  To: ath10k; +Cc: linux-wireless

Fix them to follow the general logging style in ath10k.

While at it, add print id chip_id to the debug log.

Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/core.c |    9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index 0ed60fd..76906d5 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -53,7 +53,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 
 static void ath10k_send_suspend_complete(struct ath10k *ar)
 {
-	ath10k_dbg(ATH10K_DBG_BOOT, "%s\n", __func__);
+	ath10k_dbg(ATH10K_DBG_BOOT, "boot suspend complete\n");
 
 	ar->is_target_paused = true;
 	wake_up(&ar->event_queue);
@@ -101,7 +101,7 @@ static int ath10k_init_connect_htc(struct ath10k *ar)
 		goto timeout;
 	}
 
-	ath10k_dbg(ATH10K_DBG_BOOT, "core wmi ready\n");
+	ath10k_dbg(ATH10K_DBG_BOOT, "boot wmi ready\n");
 	return 0;
 
 timeout:
@@ -204,7 +204,7 @@ static int ath10k_push_board_ext_data(struct ath10k *ar,
 	}
 
 	ath10k_dbg(ATH10K_DBG_BOOT,
-		   "ath10k: Board extended Data download addr: 0x%x\n",
+		   "boot push board extended data addr 0x%x\n",
 		   board_ext_data_addr);
 
 	if (board_ext_data_addr == 0)
@@ -722,6 +722,9 @@ static int ath10k_core_check_chip_id(struct ath10k *ar)
 {
 	u32 hw_revision = MS(ar->chip_id, SOC_CHIP_ID_REV);
 
+	ath10k_dbg(ATH10K_DBG_BOOT, "boot chip_id 0x%08x hw_revision 0x%x\n",
+		   ar->chip_id, hw_revision);
+
 	/* Check that we are not using hw1.0 (some of them have same pci id
 	 * as hw2.0) before doing anything else as ath10k crashes horribly
 	 * due to missing hw1.0 workarounds. */


^ permalink raw reply related	[flat|nested] 20+ messages in thread

* [PATCH 4/8] ath10k: add boot debug messages to pci.c and ce.c
  2013-09-08 14:55 ` Kalle Valo
@ 2013-09-08 14:55   ` Kalle Valo
  -1 siblings, 0 replies; 20+ messages in thread
From: Kalle Valo @ 2013-09-08 14:55 UTC (permalink / raw)
  To: ath10k; +Cc: linux-wireless

To unify all boot related debug messages into one debug
level.

Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/ce.c  |    8 ++++++++
 drivers/net/wireless/ath/ath10k/pci.c |    6 ++++--
 2 files changed, 12 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/ce.c b/drivers/net/wireless/ath/ath10k/ce.c
index afe5df4..38c2571 100644
--- a/drivers/net/wireless/ath/ath10k/ce.c
+++ b/drivers/net/wireless/ath/ath10k/ce.c
@@ -1010,6 +1010,10 @@ static int ath10k_ce_init_src_ring(struct ath10k *ar,
 	ath10k_ce_src_ring_lowmark_set(ar, ctrl_addr, 0);
 	ath10k_ce_src_ring_highmark_set(ar, ctrl_addr, nentries);
 
+	ath10k_dbg(ATH10K_DBG_BOOT,
+		   "boot ce src ring id %d entries %d base_addr %p\n",
+		   ce_id, nentries, src_ring->base_addr_owner_space);
+
 	return 0;
 }
 
@@ -1091,6 +1095,10 @@ static int ath10k_ce_init_dest_ring(struct ath10k *ar,
 	ath10k_ce_dest_ring_lowmark_set(ar, ctrl_addr, 0);
 	ath10k_ce_dest_ring_highmark_set(ar, ctrl_addr, nentries);
 
+	ath10k_dbg(ATH10K_DBG_BOOT,
+		   "boot ce dest ring id %d entries %d base_addr %p\n",
+		   ce_id, nentries, dest_ring->base_addr_owner_space);
+
 	return 0;
 }
 
diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c
index 880fcd0d..503a8c170 100644
--- a/drivers/net/wireless/ath/ath10k/pci.c
+++ b/drivers/net/wireless/ath/ath10k/pci.c
@@ -2375,10 +2375,10 @@ static void ath10k_pci_dump_features(struct ath10k_pci *ar_pci)
 
 		switch (i) {
 		case ATH10K_PCI_FEATURE_MSI_X:
-			ath10k_dbg(ATH10K_DBG_PCI, "device supports MSI-X\n");
+			ath10k_dbg(ATH10K_DBG_BOOT, "device supports MSI-X\n");
 			break;
 		case ATH10K_PCI_FEATURE_SOC_POWER_SAVE:
-			ath10k_dbg(ATH10K_DBG_PCI, "QCA98XX SoC power save enabled\n");
+			ath10k_dbg(ATH10K_DBG_BOOT, "QCA98XX SoC power save enabled\n");
 			break;
 		}
 	}
@@ -2504,6 +2504,8 @@ static int ath10k_pci_probe(struct pci_dev *pdev,
 
 	ath10k_do_pci_sleep(ar);
 
+	ath10k_dbg(ATH10K_DBG_BOOT, "boot pci_mem 0x%p\n", ar_pci->mem);
+
 	ret = ath10k_core_register(ar, chip_id);
 	if (ret) {
 		ath10k_err("could not register driver core (%d)\n", ret);


_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

^ permalink raw reply related	[flat|nested] 20+ messages in thread

* [PATCH 4/8] ath10k: add boot debug messages to pci.c and ce.c
@ 2013-09-08 14:55   ` Kalle Valo
  0 siblings, 0 replies; 20+ messages in thread
From: Kalle Valo @ 2013-09-08 14:55 UTC (permalink / raw)
  To: ath10k; +Cc: linux-wireless

To unify all boot related debug messages into one debug
level.

Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/ce.c  |    8 ++++++++
 drivers/net/wireless/ath/ath10k/pci.c |    6 ++++--
 2 files changed, 12 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/ce.c b/drivers/net/wireless/ath/ath10k/ce.c
index afe5df4..38c2571 100644
--- a/drivers/net/wireless/ath/ath10k/ce.c
+++ b/drivers/net/wireless/ath/ath10k/ce.c
@@ -1010,6 +1010,10 @@ static int ath10k_ce_init_src_ring(struct ath10k *ar,
 	ath10k_ce_src_ring_lowmark_set(ar, ctrl_addr, 0);
 	ath10k_ce_src_ring_highmark_set(ar, ctrl_addr, nentries);
 
+	ath10k_dbg(ATH10K_DBG_BOOT,
+		   "boot ce src ring id %d entries %d base_addr %p\n",
+		   ce_id, nentries, src_ring->base_addr_owner_space);
+
 	return 0;
 }
 
@@ -1091,6 +1095,10 @@ static int ath10k_ce_init_dest_ring(struct ath10k *ar,
 	ath10k_ce_dest_ring_lowmark_set(ar, ctrl_addr, 0);
 	ath10k_ce_dest_ring_highmark_set(ar, ctrl_addr, nentries);
 
+	ath10k_dbg(ATH10K_DBG_BOOT,
+		   "boot ce dest ring id %d entries %d base_addr %p\n",
+		   ce_id, nentries, dest_ring->base_addr_owner_space);
+
 	return 0;
 }
 
diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c
index 880fcd0d..503a8c170 100644
--- a/drivers/net/wireless/ath/ath10k/pci.c
+++ b/drivers/net/wireless/ath/ath10k/pci.c
@@ -2375,10 +2375,10 @@ static void ath10k_pci_dump_features(struct ath10k_pci *ar_pci)
 
 		switch (i) {
 		case ATH10K_PCI_FEATURE_MSI_X:
-			ath10k_dbg(ATH10K_DBG_PCI, "device supports MSI-X\n");
+			ath10k_dbg(ATH10K_DBG_BOOT, "device supports MSI-X\n");
 			break;
 		case ATH10K_PCI_FEATURE_SOC_POWER_SAVE:
-			ath10k_dbg(ATH10K_DBG_PCI, "QCA98XX SoC power save enabled\n");
+			ath10k_dbg(ATH10K_DBG_BOOT, "QCA98XX SoC power save enabled\n");
 			break;
 		}
 	}
@@ -2504,6 +2504,8 @@ static int ath10k_pci_probe(struct pci_dev *pdev,
 
 	ath10k_do_pci_sleep(ar);
 
+	ath10k_dbg(ATH10K_DBG_BOOT, "boot pci_mem 0x%p\n", ar_pci->mem);
+
 	ret = ath10k_core_register(ar, chip_id);
 	if (ret) {
 		ath10k_err("could not register driver core (%d)\n", ret);


^ permalink raw reply related	[flat|nested] 20+ messages in thread

* [PATCH 5/8] ath10k: add boot debug messages to htc.c
  2013-09-08 14:55 ` Kalle Valo
@ 2013-09-08 14:55   ` Kalle Valo
  -1 siblings, 0 replies; 20+ messages in thread
From: Kalle Valo @ 2013-09-08 14:55 UTC (permalink / raw)
  To: ath10k; +Cc: linux-wireless

To unify the boot debug level.

Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/htc.c |   16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/htc.c b/drivers/net/wireless/ath/ath10k/htc.c
index 7d445d3..f03fd8d 100644
--- a/drivers/net/wireless/ath/ath10k/htc.c
+++ b/drivers/net/wireless/ath/ath10k/htc.c
@@ -752,8 +752,8 @@ int ath10k_htc_connect_service(struct ath10k_htc *htc,
 	tx_alloc = ath10k_htc_get_credit_allocation(htc,
 						    conn_req->service_id);
 	if (!tx_alloc)
-		ath10k_dbg(ATH10K_DBG_HTC,
-			   "HTC Service %s does not allocate target credits\n",
+		ath10k_dbg(ATH10K_DBG_BOOT,
+			   "boot htc service %s does not allocate target credits\n",
 			   htc_service_name(conn_req->service_id));
 
 	skb = ath10k_htc_build_tx_ctrl_skb(htc->ar);
@@ -873,19 +873,19 @@ setup:
 	if (status)
 		return status;
 
-	ath10k_dbg(ATH10K_DBG_HTC,
-		   "HTC service: %s UL pipe: %d DL pipe: %d eid: %d ready\n",
+	ath10k_dbg(ATH10K_DBG_BOOT,
+		   "boot htc service '%s' ul pipe %d dl pipe %d eid %d ready\n",
 		   htc_service_name(ep->service_id), ep->ul_pipe_id,
 		   ep->dl_pipe_id, ep->eid);
 
-	ath10k_dbg(ATH10K_DBG_HTC,
-		   "EP %d UL polled: %d, DL polled: %d\n",
+	ath10k_dbg(ATH10K_DBG_BOOT,
+		   "boot htc ep %d ul polled %d dl polled %d\n",
 		   ep->eid, ep->ul_is_polled, ep->dl_is_polled);
 
 	if (disable_credit_flow_ctrl && ep->tx_credit_flow_enabled) {
 		ep->tx_credit_flow_enabled = false;
-		ath10k_dbg(ATH10K_DBG_HTC,
-			   "HTC service: %s eid: %d TX flow control disabled\n",
+		ath10k_dbg(ATH10K_DBG_BOOT,
+			   "boot htc service '%s' eid %d TX flow control disabled\n",
 			   htc_service_name(ep->service_id), assigned_eid);
 	}
 


_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

^ permalink raw reply related	[flat|nested] 20+ messages in thread

* [PATCH 5/8] ath10k: add boot debug messages to htc.c
@ 2013-09-08 14:55   ` Kalle Valo
  0 siblings, 0 replies; 20+ messages in thread
From: Kalle Valo @ 2013-09-08 14:55 UTC (permalink / raw)
  To: ath10k; +Cc: linux-wireless

To unify the boot debug level.

Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/htc.c |   16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/htc.c b/drivers/net/wireless/ath/ath10k/htc.c
index 7d445d3..f03fd8d 100644
--- a/drivers/net/wireless/ath/ath10k/htc.c
+++ b/drivers/net/wireless/ath/ath10k/htc.c
@@ -752,8 +752,8 @@ int ath10k_htc_connect_service(struct ath10k_htc *htc,
 	tx_alloc = ath10k_htc_get_credit_allocation(htc,
 						    conn_req->service_id);
 	if (!tx_alloc)
-		ath10k_dbg(ATH10K_DBG_HTC,
-			   "HTC Service %s does not allocate target credits\n",
+		ath10k_dbg(ATH10K_DBG_BOOT,
+			   "boot htc service %s does not allocate target credits\n",
 			   htc_service_name(conn_req->service_id));
 
 	skb = ath10k_htc_build_tx_ctrl_skb(htc->ar);
@@ -873,19 +873,19 @@ setup:
 	if (status)
 		return status;
 
-	ath10k_dbg(ATH10K_DBG_HTC,
-		   "HTC service: %s UL pipe: %d DL pipe: %d eid: %d ready\n",
+	ath10k_dbg(ATH10K_DBG_BOOT,
+		   "boot htc service '%s' ul pipe %d dl pipe %d eid %d ready\n",
 		   htc_service_name(ep->service_id), ep->ul_pipe_id,
 		   ep->dl_pipe_id, ep->eid);
 
-	ath10k_dbg(ATH10K_DBG_HTC,
-		   "EP %d UL polled: %d, DL polled: %d\n",
+	ath10k_dbg(ATH10K_DBG_BOOT,
+		   "boot htc ep %d ul polled %d dl polled %d\n",
 		   ep->eid, ep->ul_is_polled, ep->dl_is_polled);
 
 	if (disable_credit_flow_ctrl && ep->tx_credit_flow_enabled) {
 		ep->tx_credit_flow_enabled = false;
-		ath10k_dbg(ATH10K_DBG_HTC,
-			   "HTC service: %s eid: %d TX flow control disabled\n",
+		ath10k_dbg(ATH10K_DBG_BOOT,
+			   "boot htc service '%s' eid %d TX flow control disabled\n",
 			   htc_service_name(ep->service_id), assigned_eid);
 	}
 


^ permalink raw reply related	[flat|nested] 20+ messages in thread

* [PATCH 6/8] ath10k: add boot messages to htt.c
  2013-09-08 14:55 ` Kalle Valo
@ 2013-09-08 14:56   ` Kalle Valo
  -1 siblings, 0 replies; 20+ messages in thread
From: Kalle Valo @ 2013-09-08 14:56 UTC (permalink / raw)
  To: ath10k; +Cc: linux-wireless

To unify the boot debug level.

Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/htt_rx.c |    2 +-
 drivers/net/wireless/ath/ath10k/htt_tx.c |    2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/htt_rx.c b/drivers/net/wireless/ath/ath10k/htt_rx.c
index af31d2f..a39fbf4 100644
--- a/drivers/net/wireless/ath/ath10k/htt_rx.c
+++ b/drivers/net/wireless/ath/ath10k/htt_rx.c
@@ -502,7 +502,7 @@ int ath10k_htt_rx_attach(struct ath10k_htt *htt)
 	if (__ath10k_htt_rx_ring_fill_n(htt, htt->rx_ring.fill_level))
 		goto err_fill_ring;
 
-	ath10k_dbg(ATH10K_DBG_HTT, "HTT RX ring size: %d, fill_level: %d\n",
+	ath10k_dbg(ATH10K_DBG_BOOT, "htt rx ring size %d fill_level %d\n",
 		   htt->rx_ring.size, htt->rx_ring.fill_level);
 	return 0;
 
diff --git a/drivers/net/wireless/ath/ath10k/htt_tx.c b/drivers/net/wireless/ath/ath10k/htt_tx.c
index b6b1420..4548128 100644
--- a/drivers/net/wireless/ath/ath10k/htt_tx.c
+++ b/drivers/net/wireless/ath/ath10k/htt_tx.c
@@ -96,7 +96,7 @@ int ath10k_htt_tx_attach(struct ath10k_htt *htt)
 	htt->max_num_pending_tx = ath10k_hif_get_free_queue_number(htt->ar,
 								   pipe);
 
-	ath10k_dbg(ATH10K_DBG_HTT, "htt tx max num pending tx %d\n",
+	ath10k_dbg(ATH10K_DBG_BOOT, "htt tx max num pending tx %d\n",
 		   htt->max_num_pending_tx);
 
 	htt->pending_tx = kzalloc(sizeof(*htt->pending_tx) *


_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

^ permalink raw reply related	[flat|nested] 20+ messages in thread

* [PATCH 6/8] ath10k: add boot messages to htt.c
@ 2013-09-08 14:56   ` Kalle Valo
  0 siblings, 0 replies; 20+ messages in thread
From: Kalle Valo @ 2013-09-08 14:56 UTC (permalink / raw)
  To: ath10k; +Cc: linux-wireless

To unify the boot debug level.

Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/htt_rx.c |    2 +-
 drivers/net/wireless/ath/ath10k/htt_tx.c |    2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/htt_rx.c b/drivers/net/wireless/ath/ath10k/htt_rx.c
index af31d2f..a39fbf4 100644
--- a/drivers/net/wireless/ath/ath10k/htt_rx.c
+++ b/drivers/net/wireless/ath/ath10k/htt_rx.c
@@ -502,7 +502,7 @@ int ath10k_htt_rx_attach(struct ath10k_htt *htt)
 	if (__ath10k_htt_rx_ring_fill_n(htt, htt->rx_ring.fill_level))
 		goto err_fill_ring;
 
-	ath10k_dbg(ATH10K_DBG_HTT, "HTT RX ring size: %d, fill_level: %d\n",
+	ath10k_dbg(ATH10K_DBG_BOOT, "htt rx ring size %d fill_level %d\n",
 		   htt->rx_ring.size, htt->rx_ring.fill_level);
 	return 0;
 
diff --git a/drivers/net/wireless/ath/ath10k/htt_tx.c b/drivers/net/wireless/ath/ath10k/htt_tx.c
index b6b1420..4548128 100644
--- a/drivers/net/wireless/ath/ath10k/htt_tx.c
+++ b/drivers/net/wireless/ath/ath10k/htt_tx.c
@@ -96,7 +96,7 @@ int ath10k_htt_tx_attach(struct ath10k_htt *htt)
 	htt->max_num_pending_tx = ath10k_hif_get_free_queue_number(htt->ar,
 								   pipe);
 
-	ath10k_dbg(ATH10K_DBG_HTT, "htt tx max num pending tx %d\n",
+	ath10k_dbg(ATH10K_DBG_BOOT, "htt tx max num pending tx %d\n",
 		   htt->max_num_pending_tx);
 
 	htt->pending_tx = kzalloc(sizeof(*htt->pending_tx) *


^ permalink raw reply related	[flat|nested] 20+ messages in thread

* [PATCH 7/8] ath10k: clean mac.c debug messages
  2013-09-08 14:55 ` Kalle Valo
@ 2013-09-08 14:56   ` Kalle Valo
  -1 siblings, 0 replies; 20+ messages in thread
From: Kalle Valo @ 2013-09-08 14:56 UTC (permalink / raw)
  To: ath10k; +Cc: linux-wireless

Just to unify with the rest of debug messages. Minimal functional changes,
only major ones are removal of the awkward "else" style in debug
messages.

Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/mac.c |  180 +++++++++++++++++----------------
 1 file changed, 92 insertions(+), 88 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 248248b..b8c81bb 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -604,7 +604,7 @@ static int ath10k_monitor_create(struct ath10k *ar)
 		goto vdev_fail;
 	}
 
-	ath10k_dbg(ATH10K_DBG_MAC, "Monitor interface created, vdev id: %d\n",
+	ath10k_dbg(ATH10K_DBG_MAC, "mac monitor vdev %d created\n",
 		   ar->monitor_vdev_id);
 
 	ar->monitor_present = true;
@@ -636,7 +636,7 @@ static int ath10k_monitor_destroy(struct ath10k *ar)
 	ar->free_vdev_map |= 1 << (ar->monitor_vdev_id);
 	ar->monitor_present = false;
 
-	ath10k_dbg(ATH10K_DBG_MAC, "Monitor interface destroyed, vdev id: %d\n",
+	ath10k_dbg(ATH10K_DBG_MAC, "mac monitor vdev %d deleted\n",
 		   ar->monitor_vdev_id);
 	return ret;
 }
@@ -665,7 +665,7 @@ static void ath10k_control_beaconing(struct ath10k_vif *arvif,
 			    arvif->vdev_id);
 		return;
 	}
-	ath10k_dbg(ATH10K_DBG_MAC, "VDEV: %d up\n", arvif->vdev_id);
+	ath10k_dbg(ATH10K_DBG_MAC, "mac vdev %d up\n", arvif->vdev_id);
 }
 
 static void ath10k_control_ibss(struct ath10k_vif *arvif,
@@ -749,14 +749,14 @@ static void ath10k_ps_iter(void *data, u8 *mac, struct ieee80211_vif *vif)
 		psmode = WMI_STA_PS_MODE_DISABLED;
 	}
 
+	ath10k_dbg(ATH10K_DBG_MAC, "mac vdev %d psmode %s\n",
+		   arvif->vdev_id, psmode ? "enable" : "disable");
+
 	ar_iter->ret = ath10k_wmi_set_psmode(ar_iter->ar, arvif->vdev_id,
 					     psmode);
 	if (ar_iter->ret)
 		ath10k_warn("Failed to set PS Mode: %d for VDEV: %d\n",
 			    psmode, arvif->vdev_id);
-	else
-		ath10k_dbg(ATH10K_DBG_MAC, "Set PS Mode: %d for VDEV: %d\n",
-			   psmode, arvif->vdev_id);
 }
 
 /**********************/
@@ -946,7 +946,8 @@ static void ath10k_peer_assoc_h_ht(struct ath10k *ar,
 	arg->peer_ht_rates.num_rates = n;
 	arg->peer_num_spatial_streams = max((n+7) / 8, 1);
 
-	ath10k_dbg(ATH10K_DBG_MAC, "mcs cnt %d nss %d\n",
+	ath10k_dbg(ATH10K_DBG_MAC, "mac ht peer %pM mcs cnt %d nss %d\n",
+		   arg->addr,
 		   arg->peer_ht_rates.num_rates,
 		   arg->peer_num_spatial_streams);
 }
@@ -966,7 +967,7 @@ static void ath10k_peer_assoc_h_qos_ap(struct ath10k *ar,
 		arg->peer_flags |= WMI_PEER_QOS;
 
 	if (sta->wme && sta->uapsd_queues) {
-		ath10k_dbg(ATH10K_DBG_MAC, "uapsd_queues: 0x%X, max_sp: %d\n",
+		ath10k_dbg(ATH10K_DBG_MAC, "mac uapsd_queues 0x%x max_sp %d\n",
 			   sta->uapsd_queues, sta->max_sp);
 
 		arg->peer_flags |= WMI_PEER_APSD;
@@ -1045,7 +1046,8 @@ static void ath10k_peer_assoc_h_vht(struct ath10k *ar,
 	arg->peer_vht_rates.tx_mcs_set =
 		__le16_to_cpu(vht_cap->vht_mcs.tx_mcs_map);
 
-	ath10k_dbg(ATH10K_DBG_MAC, "mac vht peer\n");
+	ath10k_dbg(ATH10K_DBG_MAC, "mac vht peer %pM max_mpdu %d flags 0x%x\n",
+		   sta->addr, arg->peer_max_mpdu, arg->peer_flags);
 }
 
 static void ath10k_peer_assoc_h_qos(struct ath10k *ar,
@@ -1102,6 +1104,9 @@ static void ath10k_peer_assoc_h_phymode(struct ath10k *ar,
 		break;
 	}
 
+	ath10k_dbg(ATH10K_DBG_MAC, "mac peer %pM phymode %d\n",
+		   sta->addr, phymode);
+
 	arg->peer_phymode = phymode;
 	WARN_ON(phymode == MODE_UNKNOWN);
 }
@@ -1159,15 +1164,15 @@ static void ath10k_bss_assoc(struct ieee80211_hw *hw,
 
 	rcu_read_unlock();
 
+	ath10k_dbg(ATH10K_DBG_MAC,
+		   "mac vdev %d up (associated) bssid %pM aid %d\n",
+		   arvif->vdev_id, bss_conf->bssid, bss_conf->aid);
+
 	ret = ath10k_wmi_vdev_up(ar, arvif->vdev_id, bss_conf->aid,
 				 bss_conf->bssid);
 	if (ret)
 		ath10k_warn("VDEV: %d up failed: ret %d\n",
 			    arvif->vdev_id, ret);
-	else
-		ath10k_dbg(ATH10K_DBG_MAC,
-			   "VDEV: %d associated, BSSID: %pM, AID: %d\n",
-			   arvif->vdev_id, bss_conf->bssid, bss_conf->aid);
 }
 
 /*
@@ -1188,10 +1193,11 @@ static void ath10k_bss_disassoc(struct ieee80211_hw *hw,
 	 * No idea why this happens, even though VDEV-DOWN is supposed
 	 * to be analogous to link down, so just stop the VDEV.
 	 */
+	ath10k_dbg(ATH10K_DBG_MAC, "mac vdev %d stop (disassociated\n",
+		   arvif->vdev_id);
+
+	/* FIXME: check return value */
 	ret = ath10k_vdev_stop(arvif);
-	if (!ret)
-		ath10k_dbg(ATH10K_DBG_MAC, "VDEV: %d stopped\n",
-			   arvif->vdev_id);
 
 	/*
 	 * If we don't call VDEV-DOWN after VDEV-STOP FW will remain active and
@@ -1200,10 +1206,10 @@ static void ath10k_bss_disassoc(struct ieee80211_hw *hw,
 	 * interfaces as it expects there is no rx when no interface is
 	 * running.
 	 */
+	ath10k_dbg(ATH10K_DBG_MAC, "mac vdev %d down\n", arvif->vdev_id);
+
+	/* FIXME: why don't we print error if wmi call fails? */
 	ret = ath10k_wmi_vdev_down(ar, arvif->vdev_id);
-	if (ret)
-		ath10k_dbg(ATH10K_DBG_MAC, "VDEV: %d ath10k_wmi_vdev_down failed (%d)\n",
-			   arvif->vdev_id, ret);
 
 	ath10k_wmi_flush_tx(ar);
 
@@ -1330,8 +1336,8 @@ static int ath10k_update_channel_list(struct ath10k *ar)
 				continue;
 
 			ath10k_dbg(ATH10K_DBG_WMI,
-				   "%s: [%zd/%d] freq %d maxpower %d regpower %d antenna %d mode %d\n",
-				   __func__, ch - arg.channels, arg.n_channels,
+				   "mac channel [%zd/%d] freq %d maxpower %d regpower %d antenna %d mode %d\n",
+				    ch - arg.channels, arg.n_channels,
 				   ch->freq, ch->max_power, ch->max_reg_power,
 				   ch->max_antenna_gain, ch->mode);
 
@@ -1431,7 +1437,8 @@ static void ath10k_tx_h_update_wep_key(struct sk_buff *skb)
 	if (key->keyidx == arvif->def_wep_key_index)
 		return;
 
-	ath10k_dbg(ATH10K_DBG_MAC, "new wep keyidx will be %d\n", key->keyidx);
+	ath10k_dbg(ATH10K_DBG_MAC, "mac vdev %d keyidx %d\n",
+		   arvif->vdev_id, key->keyidx);
 
 	ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id,
 					WMI_VDEV_PARAM_DEF_KEYID,
@@ -1534,7 +1541,7 @@ void ath10k_offchan_tx_work(struct work_struct *work)
 
 		mutex_lock(&ar->conf_mutex);
 
-		ath10k_dbg(ATH10K_DBG_MAC, "processing offchannel skb %p\n",
+		ath10k_dbg(ATH10K_DBG_MAC, "mac offchannel skb %p\n",
 			   skb);
 
 		hdr = (struct ieee80211_hdr *)skb->data;
@@ -1546,6 +1553,7 @@ void ath10k_offchan_tx_work(struct work_struct *work)
 		spin_unlock_bh(&ar->data_lock);
 
 		if (peer)
+			/* FIXME: should this use ath10k_warn()? */
 			ath10k_dbg(ATH10K_DBG_MAC, "peer %pM on vdev %d already present\n",
 				   peer_addr, vdev_id);
 
@@ -1886,7 +1894,7 @@ static int ath10k_config(struct ieee80211_hw *hw, u32 changed)
 	mutex_lock(&ar->conf_mutex);
 
 	if (changed & IEEE80211_CONF_CHANGE_CHANNEL) {
-		ath10k_dbg(ATH10K_DBG_MAC, "Config channel %d mhz\n",
+		ath10k_dbg(ATH10K_DBG_MAC, "mac config channel %d mhz\n",
 			   conf->chandef.chan->center_freq);
 		spin_lock_bh(&ar->data_lock);
 		ar->rx_channel = conf->chandef.chan;
@@ -1975,7 +1983,7 @@ static int ath10k_add_interface(struct ieee80211_hw *hw,
 		break;
 	}
 
-	ath10k_dbg(ATH10K_DBG_MAC, "Add interface: id %d type %d subtype %d\n",
+	ath10k_dbg(ATH10K_DBG_MAC, "mac vdev create %d (add interface) type %d subtype %d\n",
 		   arvif->vdev_id, arvif->vdev_type, arvif->vdev_subtype);
 
 	ret = ath10k_wmi_vdev_create(ar, arvif->vdev_id, arvif->vdev_type,
@@ -2054,8 +2062,6 @@ static void ath10k_remove_interface(struct ieee80211_hw *hw,
 
 	mutex_lock(&ar->conf_mutex);
 
-	ath10k_dbg(ATH10K_DBG_MAC, "Remove interface: id %d\n", arvif->vdev_id);
-
 	ar->free_vdev_map |= 1 << (arvif->vdev_id);
 
 	if (arvif->vdev_type == WMI_VDEV_TYPE_AP) {
@@ -2066,6 +2072,9 @@ static void ath10k_remove_interface(struct ieee80211_hw *hw,
 		kfree(arvif->u.ap.noa_data);
 	}
 
+	ath10k_dbg(ATH10K_DBG_MAC, "mac vdev delete %d (remove interface)\n",
+		   arvif->vdev_id);
+
 	ret = ath10k_wmi_vdev_delete(ar, arvif->vdev_id);
 	if (ret)
 		ath10k_warn("WMI vdev delete failed: %d\n", ret);
@@ -2107,18 +2116,20 @@ static void ath10k_configure_filter(struct ieee80211_hw *hw,
 
 	if ((ar->filter_flags & FIF_PROMISC_IN_BSS) &&
 	    !ar->monitor_enabled) {
+		ath10k_dbg(ATH10K_DBG_MAC, "mac monitor %d start\n",
+			   ar->monitor_vdev_id);
+
 		ret = ath10k_monitor_start(ar, ar->monitor_vdev_id);
 		if (ret)
 			ath10k_warn("Unable to start monitor mode\n");
-		else
-			ath10k_dbg(ATH10K_DBG_MAC, "Monitor mode started\n");
 	} else if (!(ar->filter_flags & FIF_PROMISC_IN_BSS) &&
 		   ar->monitor_enabled) {
+		ath10k_dbg(ATH10K_DBG_MAC, "mac monitor %d stop\n",
+			   ar->monitor_vdev_id);
+
 		ret = ath10k_monitor_stop(ar);
 		if (ret)
 			ath10k_warn("Unable to stop monitor mode\n");
-		else
-			ath10k_dbg(ATH10K_DBG_MAC, "Monitor mode stopped\n");
 	}
 
 	mutex_unlock(&ar->conf_mutex);
@@ -2143,41 +2154,41 @@ static void ath10k_bss_info_changed(struct ieee80211_hw *hw,
 		ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id,
 						WMI_VDEV_PARAM_BEACON_INTERVAL,
 						arvif->beacon_interval);
+		ath10k_dbg(ATH10K_DBG_MAC,
+			   "mac vdev %d beacon_interval %d\n",
+			   arvif->vdev_id, arvif->beacon_interval);
+
 		if (ret)
 			ath10k_warn("Failed to set beacon interval for VDEV: %d\n",
 				    arvif->vdev_id);
-		else
-			ath10k_dbg(ATH10K_DBG_MAC,
-				   "Beacon interval: %d set for VDEV: %d\n",
-				   arvif->beacon_interval, arvif->vdev_id);
 	}
 
 	if (changed & BSS_CHANGED_BEACON) {
+		ath10k_dbg(ATH10K_DBG_MAC,
+			   "vdev %d set beacon tx mode to staggered\n",
+			   arvif->vdev_id);
+
 		ret = ath10k_wmi_pdev_set_param(ar,
 						WMI_PDEV_PARAM_BEACON_TX_MODE,
 						WMI_BEACON_STAGGERED_MODE);
 		if (ret)
 			ath10k_warn("Failed to set beacon mode for VDEV: %d\n",
 				    arvif->vdev_id);
-		else
-			ath10k_dbg(ATH10K_DBG_MAC,
-				   "Set staggered beacon mode for VDEV: %d\n",
-				   arvif->vdev_id);
 	}
 
 	if (changed & BSS_CHANGED_BEACON_INFO) {
 		arvif->dtim_period = info->dtim_period;
 
+		ath10k_dbg(ATH10K_DBG_MAC,
+			   "mac vdev %d dtim_period %d\n",
+			   arvif->vdev_id, arvif->dtim_period);
+
 		ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id,
 						WMI_VDEV_PARAM_DTIM_PERIOD,
 						arvif->dtim_period);
 		if (ret)
 			ath10k_warn("Failed to set dtim period for VDEV: %d\n",
 				    arvif->vdev_id);
-		else
-			ath10k_dbg(ATH10K_DBG_MAC,
-				   "Set dtim period: %d for VDEV: %d\n",
-				   arvif->dtim_period, arvif->vdev_id);
 	}
 
 	if (changed & BSS_CHANGED_SSID &&
@@ -2190,16 +2201,15 @@ static void ath10k_bss_info_changed(struct ieee80211_hw *hw,
 
 	if (changed & BSS_CHANGED_BSSID) {
 		if (!is_zero_ether_addr(info->bssid)) {
+			ath10k_dbg(ATH10K_DBG_MAC,
+				   "mac vdev %d create peer %pM\n",
+				   arvif->vdev_id, info->bssid);
+
 			ret = ath10k_peer_create(ar, arvif->vdev_id,
 						 info->bssid);
 			if (ret)
 				ath10k_warn("Failed to add peer: %pM for VDEV: %d\n",
 					    info->bssid, arvif->vdev_id);
-			else
-				ath10k_dbg(ATH10K_DBG_MAC,
-					   "Added peer: %pM for VDEV: %d\n",
-					   info->bssid, arvif->vdev_id);
-
 
 			if (vif->type == NL80211_IFTYPE_STATION) {
 				/*
@@ -2209,11 +2219,12 @@ static void ath10k_bss_info_changed(struct ieee80211_hw *hw,
 				memcpy(arvif->u.sta.bssid, info->bssid,
 				       ETH_ALEN);
 
+				ath10k_dbg(ATH10K_DBG_MAC,
+					   "mac vdev %d start %pM\n",
+					   arvif->vdev_id, info->bssid);
+
+				/* FIXME: check return value */
 				ret = ath10k_vdev_start(arvif);
-				if (!ret)
-					ath10k_dbg(ATH10K_DBG_MAC,
-						   "VDEV: %d started with BSSID: %pM\n",
-						   arvif->vdev_id, info->bssid);
 			}
 
 			/*
@@ -2237,16 +2248,15 @@ static void ath10k_bss_info_changed(struct ieee80211_hw *hw,
 		else
 			cts_prot = 0;
 
+		ath10k_dbg(ATH10K_DBG_MAC, "mac vdev %d cts_prot %d\n",
+			   arvif->vdev_id, cts_prot);
+
 		ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id,
 						WMI_VDEV_PARAM_ENABLE_RTSCTS,
 						cts_prot);
 		if (ret)
 			ath10k_warn("Failed to set CTS prot for VDEV: %d\n",
 				    arvif->vdev_id);
-		else
-			ath10k_dbg(ATH10K_DBG_MAC,
-				   "Set CTS prot: %d for VDEV: %d\n",
-				   cts_prot, arvif->vdev_id);
 	}
 
 	if (changed & BSS_CHANGED_ERP_SLOT) {
@@ -2257,16 +2267,15 @@ static void ath10k_bss_info_changed(struct ieee80211_hw *hw,
 		else
 			slottime = WMI_VDEV_SLOT_TIME_LONG; /* 20us */
 
+		ath10k_dbg(ATH10K_DBG_MAC, "mac vdev %d slot_time %d\n",
+			   arvif->vdev_id, slottime);
+
 		ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id,
 						WMI_VDEV_PARAM_SLOT_TIME,
 						slottime);
 		if (ret)
 			ath10k_warn("Failed to set erp slot for VDEV: %d\n",
 				    arvif->vdev_id);
-		else
-			ath10k_dbg(ATH10K_DBG_MAC,
-				   "Set slottime: %d for VDEV: %d\n",
-				   slottime, arvif->vdev_id);
 	}
 
 	if (changed & BSS_CHANGED_ERP_PREAMBLE) {
@@ -2276,16 +2285,16 @@ static void ath10k_bss_info_changed(struct ieee80211_hw *hw,
 		else
 			preamble = WMI_VDEV_PREAMBLE_LONG;
 
+		ath10k_dbg(ATH10K_DBG_MAC,
+			   "mac vdev %d preamble %dn",
+			   arvif->vdev_id, preamble);
+
 		ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id,
 						WMI_VDEV_PARAM_PREAMBLE,
 						preamble);
 		if (ret)
 			ath10k_warn("Failed to set preamble for VDEV: %d\n",
 				    arvif->vdev_id);
-		else
-			ath10k_dbg(ATH10K_DBG_MAC,
-				   "Set preamble: %d for VDEV: %d\n",
-				   preamble, arvif->vdev_id);
 	}
 
 	if (changed & BSS_CHANGED_ASSOC) {
@@ -2476,27 +2485,26 @@ static int ath10k_sta_state(struct ieee80211_hw *hw,
 		/*
 		 * New station addition.
 		 */
+		ath10k_dbg(ATH10K_DBG_MAC,
+			   "mac vdev %d peer create %pM (new sta)\n",
+			   arvif->vdev_id, sta->addr);
+
 		ret = ath10k_peer_create(ar, arvif->vdev_id, sta->addr);
 		if (ret)
 			ath10k_warn("Failed to add peer: %pM for VDEV: %d\n",
 				    sta->addr, arvif->vdev_id);
-		else
-			ath10k_dbg(ATH10K_DBG_MAC,
-				   "Added peer: %pM for VDEV: %d\n",
-				   sta->addr, arvif->vdev_id);
 	} else if ((old_state == IEEE80211_STA_NONE &&
 		    new_state == IEEE80211_STA_NOTEXIST)) {
 		/*
 		 * Existing station deletion.
 		 */
+		ath10k_dbg(ATH10K_DBG_MAC,
+			   "mac vdev %d peer delete %pM (sta gone)\n",
+			   arvif->vdev_id, sta->addr);
 		ret = ath10k_peer_delete(ar, arvif->vdev_id, sta->addr);
 		if (ret)
 			ath10k_warn("Failed to delete peer: %pM for VDEV: %d\n",
 				    sta->addr, arvif->vdev_id);
-		else
-			ath10k_dbg(ATH10K_DBG_MAC,
-				   "Removed peer: %pM for VDEV: %d\n",
-				   sta->addr, arvif->vdev_id);
 
 		if (vif->type == NL80211_IFTYPE_STATION)
 			ath10k_bss_disassoc(hw, vif);
@@ -2507,14 +2515,13 @@ static int ath10k_sta_state(struct ieee80211_hw *hw,
 		/*
 		 * New association.
 		 */
+		ath10k_dbg(ATH10K_DBG_MAC, "mac sta %pM associated\n",
+			   sta->addr);
+
 		ret = ath10k_station_assoc(ar, arvif, sta);
 		if (ret)
 			ath10k_warn("Failed to associate station: %pM\n",
 				    sta->addr);
-		else
-			ath10k_dbg(ATH10K_DBG_MAC,
-				   "Station %pM moved to assoc state\n",
-				   sta->addr);
 	} else if (old_state == IEEE80211_STA_ASSOC &&
 		   new_state == IEEE80211_STA_AUTH &&
 		   (vif->type == NL80211_IFTYPE_AP ||
@@ -2522,14 +2529,13 @@ static int ath10k_sta_state(struct ieee80211_hw *hw,
 		/*
 		 * Disassociation.
 		 */
+		ath10k_dbg(ATH10K_DBG_MAC, "mac sta %pM disassociated\n",
+			   sta->addr);
+
 		ret = ath10k_station_disassoc(ar, arvif, sta);
 		if (ret)
 			ath10k_warn("Failed to disassociate station: %pM\n",
 				    sta->addr);
-		else
-			ath10k_dbg(ATH10K_DBG_MAC,
-				   "Station %pM moved to disassociated state\n",
-				   sta->addr);
 	}
 
 	mutex_unlock(&ar->conf_mutex);
@@ -2749,14 +2755,13 @@ static void ath10k_set_rts_iter(void *data, u8 *mac, struct ieee80211_vif *vif)
 	if (ar_iter->ar->state == ATH10K_STATE_RESTARTED)
 		return;
 
+	ath10k_dbg(ATH10K_DBG_MAC, "mac vdev %d rts_threshold %d\n",
+		   arvif->vdev_id, rts);
+
 	ar_iter->ret = ath10k_mac_set_rts(arvif, rts);
 	if (ar_iter->ret)
 		ath10k_warn("Failed to set RTS threshold for VDEV: %d\n",
 			    arvif->vdev_id);
-	else
-		ath10k_dbg(ATH10K_DBG_MAC,
-			   "Set RTS threshold: %d for VDEV: %d\n",
-			   rts, arvif->vdev_id);
 }
 
 static int ath10k_set_rts_threshold(struct ieee80211_hw *hw, u32 value)
@@ -2791,14 +2796,13 @@ static void ath10k_set_frag_iter(void *data, u8 *mac, struct ieee80211_vif *vif)
 	if (ar_iter->ar->state == ATH10K_STATE_RESTARTED)
 		return;
 
+	ath10k_dbg(ATH10K_DBG_MAC, "mac vdev %d fragmentation_threshold %d\n",
+		   arvif->vdev_id, frag);
+
 	ar_iter->ret = ath10k_mac_set_frag(arvif, frag);
 	if (ar_iter->ret)
 		ath10k_warn("Failed to set frag threshold for VDEV: %d\n",
 			    arvif->vdev_id);
-	else
-		ath10k_dbg(ATH10K_DBG_MAC,
-			   "Set frag threshold: %d for VDEV: %d\n",
-			   frag, arvif->vdev_id);
 }
 
 static int ath10k_set_frag_threshold(struct ieee80211_hw *hw, u32 value)


_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

^ permalink raw reply related	[flat|nested] 20+ messages in thread

* [PATCH 7/8] ath10k: clean mac.c debug messages
@ 2013-09-08 14:56   ` Kalle Valo
  0 siblings, 0 replies; 20+ messages in thread
From: Kalle Valo @ 2013-09-08 14:56 UTC (permalink / raw)
  To: ath10k; +Cc: linux-wireless

Just to unify with the rest of debug messages. Minimal functional changes,
only major ones are removal of the awkward "else" style in debug
messages.

Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/mac.c |  180 +++++++++++++++++----------------
 1 file changed, 92 insertions(+), 88 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 248248b..b8c81bb 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -604,7 +604,7 @@ static int ath10k_monitor_create(struct ath10k *ar)
 		goto vdev_fail;
 	}
 
-	ath10k_dbg(ATH10K_DBG_MAC, "Monitor interface created, vdev id: %d\n",
+	ath10k_dbg(ATH10K_DBG_MAC, "mac monitor vdev %d created\n",
 		   ar->monitor_vdev_id);
 
 	ar->monitor_present = true;
@@ -636,7 +636,7 @@ static int ath10k_monitor_destroy(struct ath10k *ar)
 	ar->free_vdev_map |= 1 << (ar->monitor_vdev_id);
 	ar->monitor_present = false;
 
-	ath10k_dbg(ATH10K_DBG_MAC, "Monitor interface destroyed, vdev id: %d\n",
+	ath10k_dbg(ATH10K_DBG_MAC, "mac monitor vdev %d deleted\n",
 		   ar->monitor_vdev_id);
 	return ret;
 }
@@ -665,7 +665,7 @@ static void ath10k_control_beaconing(struct ath10k_vif *arvif,
 			    arvif->vdev_id);
 		return;
 	}
-	ath10k_dbg(ATH10K_DBG_MAC, "VDEV: %d up\n", arvif->vdev_id);
+	ath10k_dbg(ATH10K_DBG_MAC, "mac vdev %d up\n", arvif->vdev_id);
 }
 
 static void ath10k_control_ibss(struct ath10k_vif *arvif,
@@ -749,14 +749,14 @@ static void ath10k_ps_iter(void *data, u8 *mac, struct ieee80211_vif *vif)
 		psmode = WMI_STA_PS_MODE_DISABLED;
 	}
 
+	ath10k_dbg(ATH10K_DBG_MAC, "mac vdev %d psmode %s\n",
+		   arvif->vdev_id, psmode ? "enable" : "disable");
+
 	ar_iter->ret = ath10k_wmi_set_psmode(ar_iter->ar, arvif->vdev_id,
 					     psmode);
 	if (ar_iter->ret)
 		ath10k_warn("Failed to set PS Mode: %d for VDEV: %d\n",
 			    psmode, arvif->vdev_id);
-	else
-		ath10k_dbg(ATH10K_DBG_MAC, "Set PS Mode: %d for VDEV: %d\n",
-			   psmode, arvif->vdev_id);
 }
 
 /**********************/
@@ -946,7 +946,8 @@ static void ath10k_peer_assoc_h_ht(struct ath10k *ar,
 	arg->peer_ht_rates.num_rates = n;
 	arg->peer_num_spatial_streams = max((n+7) / 8, 1);
 
-	ath10k_dbg(ATH10K_DBG_MAC, "mcs cnt %d nss %d\n",
+	ath10k_dbg(ATH10K_DBG_MAC, "mac ht peer %pM mcs cnt %d nss %d\n",
+		   arg->addr,
 		   arg->peer_ht_rates.num_rates,
 		   arg->peer_num_spatial_streams);
 }
@@ -966,7 +967,7 @@ static void ath10k_peer_assoc_h_qos_ap(struct ath10k *ar,
 		arg->peer_flags |= WMI_PEER_QOS;
 
 	if (sta->wme && sta->uapsd_queues) {
-		ath10k_dbg(ATH10K_DBG_MAC, "uapsd_queues: 0x%X, max_sp: %d\n",
+		ath10k_dbg(ATH10K_DBG_MAC, "mac uapsd_queues 0x%x max_sp %d\n",
 			   sta->uapsd_queues, sta->max_sp);
 
 		arg->peer_flags |= WMI_PEER_APSD;
@@ -1045,7 +1046,8 @@ static void ath10k_peer_assoc_h_vht(struct ath10k *ar,
 	arg->peer_vht_rates.tx_mcs_set =
 		__le16_to_cpu(vht_cap->vht_mcs.tx_mcs_map);
 
-	ath10k_dbg(ATH10K_DBG_MAC, "mac vht peer\n");
+	ath10k_dbg(ATH10K_DBG_MAC, "mac vht peer %pM max_mpdu %d flags 0x%x\n",
+		   sta->addr, arg->peer_max_mpdu, arg->peer_flags);
 }
 
 static void ath10k_peer_assoc_h_qos(struct ath10k *ar,
@@ -1102,6 +1104,9 @@ static void ath10k_peer_assoc_h_phymode(struct ath10k *ar,
 		break;
 	}
 
+	ath10k_dbg(ATH10K_DBG_MAC, "mac peer %pM phymode %d\n",
+		   sta->addr, phymode);
+
 	arg->peer_phymode = phymode;
 	WARN_ON(phymode == MODE_UNKNOWN);
 }
@@ -1159,15 +1164,15 @@ static void ath10k_bss_assoc(struct ieee80211_hw *hw,
 
 	rcu_read_unlock();
 
+	ath10k_dbg(ATH10K_DBG_MAC,
+		   "mac vdev %d up (associated) bssid %pM aid %d\n",
+		   arvif->vdev_id, bss_conf->bssid, bss_conf->aid);
+
 	ret = ath10k_wmi_vdev_up(ar, arvif->vdev_id, bss_conf->aid,
 				 bss_conf->bssid);
 	if (ret)
 		ath10k_warn("VDEV: %d up failed: ret %d\n",
 			    arvif->vdev_id, ret);
-	else
-		ath10k_dbg(ATH10K_DBG_MAC,
-			   "VDEV: %d associated, BSSID: %pM, AID: %d\n",
-			   arvif->vdev_id, bss_conf->bssid, bss_conf->aid);
 }
 
 /*
@@ -1188,10 +1193,11 @@ static void ath10k_bss_disassoc(struct ieee80211_hw *hw,
 	 * No idea why this happens, even though VDEV-DOWN is supposed
 	 * to be analogous to link down, so just stop the VDEV.
 	 */
+	ath10k_dbg(ATH10K_DBG_MAC, "mac vdev %d stop (disassociated\n",
+		   arvif->vdev_id);
+
+	/* FIXME: check return value */
 	ret = ath10k_vdev_stop(arvif);
-	if (!ret)
-		ath10k_dbg(ATH10K_DBG_MAC, "VDEV: %d stopped\n",
-			   arvif->vdev_id);
 
 	/*
 	 * If we don't call VDEV-DOWN after VDEV-STOP FW will remain active and
@@ -1200,10 +1206,10 @@ static void ath10k_bss_disassoc(struct ieee80211_hw *hw,
 	 * interfaces as it expects there is no rx when no interface is
 	 * running.
 	 */
+	ath10k_dbg(ATH10K_DBG_MAC, "mac vdev %d down\n", arvif->vdev_id);
+
+	/* FIXME: why don't we print error if wmi call fails? */
 	ret = ath10k_wmi_vdev_down(ar, arvif->vdev_id);
-	if (ret)
-		ath10k_dbg(ATH10K_DBG_MAC, "VDEV: %d ath10k_wmi_vdev_down failed (%d)\n",
-			   arvif->vdev_id, ret);
 
 	ath10k_wmi_flush_tx(ar);
 
@@ -1330,8 +1336,8 @@ static int ath10k_update_channel_list(struct ath10k *ar)
 				continue;
 
 			ath10k_dbg(ATH10K_DBG_WMI,
-				   "%s: [%zd/%d] freq %d maxpower %d regpower %d antenna %d mode %d\n",
-				   __func__, ch - arg.channels, arg.n_channels,
+				   "mac channel [%zd/%d] freq %d maxpower %d regpower %d antenna %d mode %d\n",
+				    ch - arg.channels, arg.n_channels,
 				   ch->freq, ch->max_power, ch->max_reg_power,
 				   ch->max_antenna_gain, ch->mode);
 
@@ -1431,7 +1437,8 @@ static void ath10k_tx_h_update_wep_key(struct sk_buff *skb)
 	if (key->keyidx == arvif->def_wep_key_index)
 		return;
 
-	ath10k_dbg(ATH10K_DBG_MAC, "new wep keyidx will be %d\n", key->keyidx);
+	ath10k_dbg(ATH10K_DBG_MAC, "mac vdev %d keyidx %d\n",
+		   arvif->vdev_id, key->keyidx);
 
 	ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id,
 					WMI_VDEV_PARAM_DEF_KEYID,
@@ -1534,7 +1541,7 @@ void ath10k_offchan_tx_work(struct work_struct *work)
 
 		mutex_lock(&ar->conf_mutex);
 
-		ath10k_dbg(ATH10K_DBG_MAC, "processing offchannel skb %p\n",
+		ath10k_dbg(ATH10K_DBG_MAC, "mac offchannel skb %p\n",
 			   skb);
 
 		hdr = (struct ieee80211_hdr *)skb->data;
@@ -1546,6 +1553,7 @@ void ath10k_offchan_tx_work(struct work_struct *work)
 		spin_unlock_bh(&ar->data_lock);
 
 		if (peer)
+			/* FIXME: should this use ath10k_warn()? */
 			ath10k_dbg(ATH10K_DBG_MAC, "peer %pM on vdev %d already present\n",
 				   peer_addr, vdev_id);
 
@@ -1886,7 +1894,7 @@ static int ath10k_config(struct ieee80211_hw *hw, u32 changed)
 	mutex_lock(&ar->conf_mutex);
 
 	if (changed & IEEE80211_CONF_CHANGE_CHANNEL) {
-		ath10k_dbg(ATH10K_DBG_MAC, "Config channel %d mhz\n",
+		ath10k_dbg(ATH10K_DBG_MAC, "mac config channel %d mhz\n",
 			   conf->chandef.chan->center_freq);
 		spin_lock_bh(&ar->data_lock);
 		ar->rx_channel = conf->chandef.chan;
@@ -1975,7 +1983,7 @@ static int ath10k_add_interface(struct ieee80211_hw *hw,
 		break;
 	}
 
-	ath10k_dbg(ATH10K_DBG_MAC, "Add interface: id %d type %d subtype %d\n",
+	ath10k_dbg(ATH10K_DBG_MAC, "mac vdev create %d (add interface) type %d subtype %d\n",
 		   arvif->vdev_id, arvif->vdev_type, arvif->vdev_subtype);
 
 	ret = ath10k_wmi_vdev_create(ar, arvif->vdev_id, arvif->vdev_type,
@@ -2054,8 +2062,6 @@ static void ath10k_remove_interface(struct ieee80211_hw *hw,
 
 	mutex_lock(&ar->conf_mutex);
 
-	ath10k_dbg(ATH10K_DBG_MAC, "Remove interface: id %d\n", arvif->vdev_id);
-
 	ar->free_vdev_map |= 1 << (arvif->vdev_id);
 
 	if (arvif->vdev_type == WMI_VDEV_TYPE_AP) {
@@ -2066,6 +2072,9 @@ static void ath10k_remove_interface(struct ieee80211_hw *hw,
 		kfree(arvif->u.ap.noa_data);
 	}
 
+	ath10k_dbg(ATH10K_DBG_MAC, "mac vdev delete %d (remove interface)\n",
+		   arvif->vdev_id);
+
 	ret = ath10k_wmi_vdev_delete(ar, arvif->vdev_id);
 	if (ret)
 		ath10k_warn("WMI vdev delete failed: %d\n", ret);
@@ -2107,18 +2116,20 @@ static void ath10k_configure_filter(struct ieee80211_hw *hw,
 
 	if ((ar->filter_flags & FIF_PROMISC_IN_BSS) &&
 	    !ar->monitor_enabled) {
+		ath10k_dbg(ATH10K_DBG_MAC, "mac monitor %d start\n",
+			   ar->monitor_vdev_id);
+
 		ret = ath10k_monitor_start(ar, ar->monitor_vdev_id);
 		if (ret)
 			ath10k_warn("Unable to start monitor mode\n");
-		else
-			ath10k_dbg(ATH10K_DBG_MAC, "Monitor mode started\n");
 	} else if (!(ar->filter_flags & FIF_PROMISC_IN_BSS) &&
 		   ar->monitor_enabled) {
+		ath10k_dbg(ATH10K_DBG_MAC, "mac monitor %d stop\n",
+			   ar->monitor_vdev_id);
+
 		ret = ath10k_monitor_stop(ar);
 		if (ret)
 			ath10k_warn("Unable to stop monitor mode\n");
-		else
-			ath10k_dbg(ATH10K_DBG_MAC, "Monitor mode stopped\n");
 	}
 
 	mutex_unlock(&ar->conf_mutex);
@@ -2143,41 +2154,41 @@ static void ath10k_bss_info_changed(struct ieee80211_hw *hw,
 		ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id,
 						WMI_VDEV_PARAM_BEACON_INTERVAL,
 						arvif->beacon_interval);
+		ath10k_dbg(ATH10K_DBG_MAC,
+			   "mac vdev %d beacon_interval %d\n",
+			   arvif->vdev_id, arvif->beacon_interval);
+
 		if (ret)
 			ath10k_warn("Failed to set beacon interval for VDEV: %d\n",
 				    arvif->vdev_id);
-		else
-			ath10k_dbg(ATH10K_DBG_MAC,
-				   "Beacon interval: %d set for VDEV: %d\n",
-				   arvif->beacon_interval, arvif->vdev_id);
 	}
 
 	if (changed & BSS_CHANGED_BEACON) {
+		ath10k_dbg(ATH10K_DBG_MAC,
+			   "vdev %d set beacon tx mode to staggered\n",
+			   arvif->vdev_id);
+
 		ret = ath10k_wmi_pdev_set_param(ar,
 						WMI_PDEV_PARAM_BEACON_TX_MODE,
 						WMI_BEACON_STAGGERED_MODE);
 		if (ret)
 			ath10k_warn("Failed to set beacon mode for VDEV: %d\n",
 				    arvif->vdev_id);
-		else
-			ath10k_dbg(ATH10K_DBG_MAC,
-				   "Set staggered beacon mode for VDEV: %d\n",
-				   arvif->vdev_id);
 	}
 
 	if (changed & BSS_CHANGED_BEACON_INFO) {
 		arvif->dtim_period = info->dtim_period;
 
+		ath10k_dbg(ATH10K_DBG_MAC,
+			   "mac vdev %d dtim_period %d\n",
+			   arvif->vdev_id, arvif->dtim_period);
+
 		ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id,
 						WMI_VDEV_PARAM_DTIM_PERIOD,
 						arvif->dtim_period);
 		if (ret)
 			ath10k_warn("Failed to set dtim period for VDEV: %d\n",
 				    arvif->vdev_id);
-		else
-			ath10k_dbg(ATH10K_DBG_MAC,
-				   "Set dtim period: %d for VDEV: %d\n",
-				   arvif->dtim_period, arvif->vdev_id);
 	}
 
 	if (changed & BSS_CHANGED_SSID &&
@@ -2190,16 +2201,15 @@ static void ath10k_bss_info_changed(struct ieee80211_hw *hw,
 
 	if (changed & BSS_CHANGED_BSSID) {
 		if (!is_zero_ether_addr(info->bssid)) {
+			ath10k_dbg(ATH10K_DBG_MAC,
+				   "mac vdev %d create peer %pM\n",
+				   arvif->vdev_id, info->bssid);
+
 			ret = ath10k_peer_create(ar, arvif->vdev_id,
 						 info->bssid);
 			if (ret)
 				ath10k_warn("Failed to add peer: %pM for VDEV: %d\n",
 					    info->bssid, arvif->vdev_id);
-			else
-				ath10k_dbg(ATH10K_DBG_MAC,
-					   "Added peer: %pM for VDEV: %d\n",
-					   info->bssid, arvif->vdev_id);
-
 
 			if (vif->type == NL80211_IFTYPE_STATION) {
 				/*
@@ -2209,11 +2219,12 @@ static void ath10k_bss_info_changed(struct ieee80211_hw *hw,
 				memcpy(arvif->u.sta.bssid, info->bssid,
 				       ETH_ALEN);
 
+				ath10k_dbg(ATH10K_DBG_MAC,
+					   "mac vdev %d start %pM\n",
+					   arvif->vdev_id, info->bssid);
+
+				/* FIXME: check return value */
 				ret = ath10k_vdev_start(arvif);
-				if (!ret)
-					ath10k_dbg(ATH10K_DBG_MAC,
-						   "VDEV: %d started with BSSID: %pM\n",
-						   arvif->vdev_id, info->bssid);
 			}
 
 			/*
@@ -2237,16 +2248,15 @@ static void ath10k_bss_info_changed(struct ieee80211_hw *hw,
 		else
 			cts_prot = 0;
 
+		ath10k_dbg(ATH10K_DBG_MAC, "mac vdev %d cts_prot %d\n",
+			   arvif->vdev_id, cts_prot);
+
 		ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id,
 						WMI_VDEV_PARAM_ENABLE_RTSCTS,
 						cts_prot);
 		if (ret)
 			ath10k_warn("Failed to set CTS prot for VDEV: %d\n",
 				    arvif->vdev_id);
-		else
-			ath10k_dbg(ATH10K_DBG_MAC,
-				   "Set CTS prot: %d for VDEV: %d\n",
-				   cts_prot, arvif->vdev_id);
 	}
 
 	if (changed & BSS_CHANGED_ERP_SLOT) {
@@ -2257,16 +2267,15 @@ static void ath10k_bss_info_changed(struct ieee80211_hw *hw,
 		else
 			slottime = WMI_VDEV_SLOT_TIME_LONG; /* 20us */
 
+		ath10k_dbg(ATH10K_DBG_MAC, "mac vdev %d slot_time %d\n",
+			   arvif->vdev_id, slottime);
+
 		ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id,
 						WMI_VDEV_PARAM_SLOT_TIME,
 						slottime);
 		if (ret)
 			ath10k_warn("Failed to set erp slot for VDEV: %d\n",
 				    arvif->vdev_id);
-		else
-			ath10k_dbg(ATH10K_DBG_MAC,
-				   "Set slottime: %d for VDEV: %d\n",
-				   slottime, arvif->vdev_id);
 	}
 
 	if (changed & BSS_CHANGED_ERP_PREAMBLE) {
@@ -2276,16 +2285,16 @@ static void ath10k_bss_info_changed(struct ieee80211_hw *hw,
 		else
 			preamble = WMI_VDEV_PREAMBLE_LONG;
 
+		ath10k_dbg(ATH10K_DBG_MAC,
+			   "mac vdev %d preamble %dn",
+			   arvif->vdev_id, preamble);
+
 		ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id,
 						WMI_VDEV_PARAM_PREAMBLE,
 						preamble);
 		if (ret)
 			ath10k_warn("Failed to set preamble for VDEV: %d\n",
 				    arvif->vdev_id);
-		else
-			ath10k_dbg(ATH10K_DBG_MAC,
-				   "Set preamble: %d for VDEV: %d\n",
-				   preamble, arvif->vdev_id);
 	}
 
 	if (changed & BSS_CHANGED_ASSOC) {
@@ -2476,27 +2485,26 @@ static int ath10k_sta_state(struct ieee80211_hw *hw,
 		/*
 		 * New station addition.
 		 */
+		ath10k_dbg(ATH10K_DBG_MAC,
+			   "mac vdev %d peer create %pM (new sta)\n",
+			   arvif->vdev_id, sta->addr);
+
 		ret = ath10k_peer_create(ar, arvif->vdev_id, sta->addr);
 		if (ret)
 			ath10k_warn("Failed to add peer: %pM for VDEV: %d\n",
 				    sta->addr, arvif->vdev_id);
-		else
-			ath10k_dbg(ATH10K_DBG_MAC,
-				   "Added peer: %pM for VDEV: %d\n",
-				   sta->addr, arvif->vdev_id);
 	} else if ((old_state == IEEE80211_STA_NONE &&
 		    new_state == IEEE80211_STA_NOTEXIST)) {
 		/*
 		 * Existing station deletion.
 		 */
+		ath10k_dbg(ATH10K_DBG_MAC,
+			   "mac vdev %d peer delete %pM (sta gone)\n",
+			   arvif->vdev_id, sta->addr);
 		ret = ath10k_peer_delete(ar, arvif->vdev_id, sta->addr);
 		if (ret)
 			ath10k_warn("Failed to delete peer: %pM for VDEV: %d\n",
 				    sta->addr, arvif->vdev_id);
-		else
-			ath10k_dbg(ATH10K_DBG_MAC,
-				   "Removed peer: %pM for VDEV: %d\n",
-				   sta->addr, arvif->vdev_id);
 
 		if (vif->type == NL80211_IFTYPE_STATION)
 			ath10k_bss_disassoc(hw, vif);
@@ -2507,14 +2515,13 @@ static int ath10k_sta_state(struct ieee80211_hw *hw,
 		/*
 		 * New association.
 		 */
+		ath10k_dbg(ATH10K_DBG_MAC, "mac sta %pM associated\n",
+			   sta->addr);
+
 		ret = ath10k_station_assoc(ar, arvif, sta);
 		if (ret)
 			ath10k_warn("Failed to associate station: %pM\n",
 				    sta->addr);
-		else
-			ath10k_dbg(ATH10K_DBG_MAC,
-				   "Station %pM moved to assoc state\n",
-				   sta->addr);
 	} else if (old_state == IEEE80211_STA_ASSOC &&
 		   new_state == IEEE80211_STA_AUTH &&
 		   (vif->type == NL80211_IFTYPE_AP ||
@@ -2522,14 +2529,13 @@ static int ath10k_sta_state(struct ieee80211_hw *hw,
 		/*
 		 * Disassociation.
 		 */
+		ath10k_dbg(ATH10K_DBG_MAC, "mac sta %pM disassociated\n",
+			   sta->addr);
+
 		ret = ath10k_station_disassoc(ar, arvif, sta);
 		if (ret)
 			ath10k_warn("Failed to disassociate station: %pM\n",
 				    sta->addr);
-		else
-			ath10k_dbg(ATH10K_DBG_MAC,
-				   "Station %pM moved to disassociated state\n",
-				   sta->addr);
 	}
 
 	mutex_unlock(&ar->conf_mutex);
@@ -2749,14 +2755,13 @@ static void ath10k_set_rts_iter(void *data, u8 *mac, struct ieee80211_vif *vif)
 	if (ar_iter->ar->state == ATH10K_STATE_RESTARTED)
 		return;
 
+	ath10k_dbg(ATH10K_DBG_MAC, "mac vdev %d rts_threshold %d\n",
+		   arvif->vdev_id, rts);
+
 	ar_iter->ret = ath10k_mac_set_rts(arvif, rts);
 	if (ar_iter->ret)
 		ath10k_warn("Failed to set RTS threshold for VDEV: %d\n",
 			    arvif->vdev_id);
-	else
-		ath10k_dbg(ATH10K_DBG_MAC,
-			   "Set RTS threshold: %d for VDEV: %d\n",
-			   rts, arvif->vdev_id);
 }
 
 static int ath10k_set_rts_threshold(struct ieee80211_hw *hw, u32 value)
@@ -2791,14 +2796,13 @@ static void ath10k_set_frag_iter(void *data, u8 *mac, struct ieee80211_vif *vif)
 	if (ar_iter->ar->state == ATH10K_STATE_RESTARTED)
 		return;
 
+	ath10k_dbg(ATH10K_DBG_MAC, "mac vdev %d fragmentation_threshold %d\n",
+		   arvif->vdev_id, frag);
+
 	ar_iter->ret = ath10k_mac_set_frag(arvif, frag);
 	if (ar_iter->ret)
 		ath10k_warn("Failed to set frag threshold for VDEV: %d\n",
 			    arvif->vdev_id);
-	else
-		ath10k_dbg(ATH10K_DBG_MAC,
-			   "Set frag threshold: %d for VDEV: %d\n",
-			   frag, arvif->vdev_id);
 }
 
 static int ath10k_set_frag_threshold(struct ieee80211_hw *hw, u32 value)


^ permalink raw reply related	[flat|nested] 20+ messages in thread

* [PATCH 8/8] ath10k: print phymode as a string
  2013-09-08 14:55 ` Kalle Valo
@ 2013-09-08 14:56   ` Kalle Valo
  -1 siblings, 0 replies; 20+ messages in thread
From: Kalle Valo @ 2013-09-08 14:56 UTC (permalink / raw)
  To: ath10k; +Cc: linux-wireless

Makes it easier to read debug logs.

Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/mac.c |    9 ++++++-
 drivers/net/wireless/ath/ath10k/wmi.h |   42 +++++++++++++++++++++++++++++++++
 2 files changed, 49 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index b8c81bb..2b11856 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -460,6 +460,11 @@ static int ath10k_vdev_start(struct ath10k_vif *arvif)
 		arg.ssid_len = arvif->vif->bss_conf.ssid_len;
 	}
 
+	ath10k_dbg(ATH10K_DBG_MAC,
+		   "mac vdev %d start center_freq %d phymode %s\n",
+		   arg.vdev_id, arg.channel.freq,
+		   ath10k_wmi_phymode_str(arg.channel.mode));
+
 	ret = ath10k_wmi_vdev_start(ar, &arg);
 	if (ret) {
 		ath10k_warn("WMI vdev start failed: ret %d\n", ret);
@@ -1104,8 +1109,8 @@ static void ath10k_peer_assoc_h_phymode(struct ath10k *ar,
 		break;
 	}
 
-	ath10k_dbg(ATH10K_DBG_MAC, "mac peer %pM phymode %d\n",
-		   sta->addr, phymode);
+	ath10k_dbg(ATH10K_DBG_MAC, "mac peer %pM phymode %s\n",
+		   sta->addr, ath10k_wmi_phymode_str(phymode));
 
 	arg->peer_phymode = phymode;
 	WARN_ON(phymode == MODE_UNKNOWN);
diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h
index 40fcf05..ab46582 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.h
+++ b/drivers/net/wireless/ath/ath10k/wmi.h
@@ -508,6 +508,48 @@ enum wmi_phy_mode {
 	MODE_MAX        = 14
 };
 
+static inline const char *ath10k_wmi_phymode_str(enum wmi_phy_mode mode)
+{
+	switch (mode) {
+	case MODE_11A:
+		return "11a";
+	case MODE_11G:
+		return "11g";
+	case MODE_11B:
+		return "11b";
+	case MODE_11GONLY:
+		return "11gonly";
+	case MODE_11NA_HT20:
+		return "11na-ht20";
+	case MODE_11NG_HT20:
+		return "11ng-ht20";
+	case MODE_11NA_HT40:
+		return "11na-ht40";
+	case MODE_11NG_HT40:
+		return "11ng-ht40";
+	case MODE_11AC_VHT20:
+		return "11ac-vht20";
+	case MODE_11AC_VHT40:
+		return "11ac-vht40";
+	case MODE_11AC_VHT80:
+		return "11ac-vht80";
+	case MODE_11AC_VHT20_2G:
+		return "11ac-vht20-2g";
+	case MODE_11AC_VHT40_2G:
+		return "11ac-vht40-2g";
+	case MODE_11AC_VHT80_2G:
+		return "11ac-vht80-2g";
+	case MODE_UNKNOWN:
+		/* skip */
+		break;
+
+		/* no default handler to allow compiler to check that the
+		 * enum is fully handled */
+	};
+
+	return "<unknown>";
+}
+
 #define WMI_CHAN_LIST_TAG	0x1
 #define WMI_SSID_LIST_TAG	0x2
 #define WMI_BSSID_LIST_TAG	0x3


_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

^ permalink raw reply related	[flat|nested] 20+ messages in thread

* [PATCH 8/8] ath10k: print phymode as a string
@ 2013-09-08 14:56   ` Kalle Valo
  0 siblings, 0 replies; 20+ messages in thread
From: Kalle Valo @ 2013-09-08 14:56 UTC (permalink / raw)
  To: ath10k; +Cc: linux-wireless

Makes it easier to read debug logs.

Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/mac.c |    9 ++++++-
 drivers/net/wireless/ath/ath10k/wmi.h |   42 +++++++++++++++++++++++++++++++++
 2 files changed, 49 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index b8c81bb..2b11856 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -460,6 +460,11 @@ static int ath10k_vdev_start(struct ath10k_vif *arvif)
 		arg.ssid_len = arvif->vif->bss_conf.ssid_len;
 	}
 
+	ath10k_dbg(ATH10K_DBG_MAC,
+		   "mac vdev %d start center_freq %d phymode %s\n",
+		   arg.vdev_id, arg.channel.freq,
+		   ath10k_wmi_phymode_str(arg.channel.mode));
+
 	ret = ath10k_wmi_vdev_start(ar, &arg);
 	if (ret) {
 		ath10k_warn("WMI vdev start failed: ret %d\n", ret);
@@ -1104,8 +1109,8 @@ static void ath10k_peer_assoc_h_phymode(struct ath10k *ar,
 		break;
 	}
 
-	ath10k_dbg(ATH10K_DBG_MAC, "mac peer %pM phymode %d\n",
-		   sta->addr, phymode);
+	ath10k_dbg(ATH10K_DBG_MAC, "mac peer %pM phymode %s\n",
+		   sta->addr, ath10k_wmi_phymode_str(phymode));
 
 	arg->peer_phymode = phymode;
 	WARN_ON(phymode == MODE_UNKNOWN);
diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h
index 40fcf05..ab46582 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.h
+++ b/drivers/net/wireless/ath/ath10k/wmi.h
@@ -508,6 +508,48 @@ enum wmi_phy_mode {
 	MODE_MAX        = 14
 };
 
+static inline const char *ath10k_wmi_phymode_str(enum wmi_phy_mode mode)
+{
+	switch (mode) {
+	case MODE_11A:
+		return "11a";
+	case MODE_11G:
+		return "11g";
+	case MODE_11B:
+		return "11b";
+	case MODE_11GONLY:
+		return "11gonly";
+	case MODE_11NA_HT20:
+		return "11na-ht20";
+	case MODE_11NG_HT20:
+		return "11ng-ht20";
+	case MODE_11NA_HT40:
+		return "11na-ht40";
+	case MODE_11NG_HT40:
+		return "11ng-ht40";
+	case MODE_11AC_VHT20:
+		return "11ac-vht20";
+	case MODE_11AC_VHT40:
+		return "11ac-vht40";
+	case MODE_11AC_VHT80:
+		return "11ac-vht80";
+	case MODE_11AC_VHT20_2G:
+		return "11ac-vht20-2g";
+	case MODE_11AC_VHT40_2G:
+		return "11ac-vht40-2g";
+	case MODE_11AC_VHT80_2G:
+		return "11ac-vht80-2g";
+	case MODE_UNKNOWN:
+		/* skip */
+		break;
+
+		/* no default handler to allow compiler to check that the
+		 * enum is fully handled */
+	};
+
+	return "<unknown>";
+}
+
 #define WMI_CHAN_LIST_TAG	0x1
 #define WMI_SSID_LIST_TAG	0x2
 #define WMI_BSSID_LIST_TAG	0x3


^ permalink raw reply related	[flat|nested] 20+ messages in thread

* Re: [PATCH 0/8] ath10k: boot, bmi and mac debug message cleanup
  2013-09-08 14:55 ` Kalle Valo
@ 2013-09-12 16:12   ` Kalle Valo
  -1 siblings, 0 replies; 20+ messages in thread
From: Kalle Valo @ 2013-09-12 16:12 UTC (permalink / raw)
  To: ath10k; +Cc: linux-wireless

Kalle Valo <kvalo@qca.qualcomm.com> writes:

> Simple message log cleanup. Please review.
>
> ---
>
> Kalle Valo (8):
>       ath10k: add BMI log level
>       ath10k: rename ATH10K_DBG_CORE to BOOT
>       ath10k: cleanup debug messages in core.c
>       ath10k: add boot debug messages to pci.c and ce.c
>       ath10k: add boot debug messages to htc.c
>       ath10k: add boot messages to htt.c
>       ath10k: clean mac.c debug messages
>       ath10k: print phymode as a string

Applied.

Kalle

_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

^ permalink raw reply	[flat|nested] 20+ messages in thread

* Re: [PATCH 0/8] ath10k: boot, bmi and mac debug message cleanup
@ 2013-09-12 16:12   ` Kalle Valo
  0 siblings, 0 replies; 20+ messages in thread
From: Kalle Valo @ 2013-09-12 16:12 UTC (permalink / raw)
  To: ath10k; +Cc: linux-wireless

Kalle Valo <kvalo@qca.qualcomm.com> writes:

> Simple message log cleanup. Please review.
>
> ---
>
> Kalle Valo (8):
>       ath10k: add BMI log level
>       ath10k: rename ATH10K_DBG_CORE to BOOT
>       ath10k: cleanup debug messages in core.c
>       ath10k: add boot debug messages to pci.c and ce.c
>       ath10k: add boot debug messages to htc.c
>       ath10k: add boot messages to htt.c
>       ath10k: clean mac.c debug messages
>       ath10k: print phymode as a string

Applied.

Kalle

^ permalink raw reply	[flat|nested] 20+ messages in thread

end of thread, other threads:[~2013-09-12 16:12 UTC | newest]

Thread overview: 20+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-09-08 14:55 [PATCH 0/8] ath10k: boot, bmi and mac debug message cleanup Kalle Valo
2013-09-08 14:55 ` Kalle Valo
2013-09-08 14:55 ` [PATCH 1/8] ath10k: add BMI log level Kalle Valo
2013-09-08 14:55   ` Kalle Valo
2013-09-08 14:55 ` [PATCH 2/8] ath10k: rename ATH10K_DBG_CORE to BOOT Kalle Valo
2013-09-08 14:55   ` Kalle Valo
2013-09-08 14:55 ` [PATCH 3/8] ath10k: cleanup debug messages in core.c Kalle Valo
2013-09-08 14:55   ` Kalle Valo
2013-09-08 14:55 ` [PATCH 4/8] ath10k: add boot debug messages to pci.c and ce.c Kalle Valo
2013-09-08 14:55   ` Kalle Valo
2013-09-08 14:55 ` [PATCH 5/8] ath10k: add boot debug messages to htc.c Kalle Valo
2013-09-08 14:55   ` Kalle Valo
2013-09-08 14:56 ` [PATCH 6/8] ath10k: add boot messages to htt.c Kalle Valo
2013-09-08 14:56   ` Kalle Valo
2013-09-08 14:56 ` [PATCH 7/8] ath10k: clean mac.c debug messages Kalle Valo
2013-09-08 14:56   ` Kalle Valo
2013-09-08 14:56 ` [PATCH 8/8] ath10k: print phymode as a string Kalle Valo
2013-09-08 14:56   ` Kalle Valo
2013-09-12 16:12 ` [PATCH 0/8] ath10k: boot, bmi and mac debug message cleanup Kalle Valo
2013-09-12 16:12   ` Kalle Valo

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.