* [PATCH 3/3] h8300 update timer handler - misc update
@ 2008-08-03 4:33 Yoshinori Sato
0 siblings, 0 replies; only message in thread
From: Yoshinori Sato @ 2008-08-03 4:33 UTC (permalink / raw)
To: Andrew Morton; +Cc: lkml
- Update selection
- Update common timer handler
- Add support functions
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
diff --git a/arch/h8300/Kconfig.cpu b/arch/h8300/Kconfig.cpu
index 582797d..b65dcfe 100644
--- a/arch/h8300/Kconfig.cpu
+++ b/arch/h8300/Kconfig.cpu
@@ -1,5 +1,7 @@
menu "Processor type and features"
+source "kernel/time/Kconfig"
+
choice
prompt "H8/300 platform"
default H8300H_GENERIC
@@ -11,6 +13,7 @@ config H8300H_GENERIC
config H8300H_AKI3068NET
bool "AE-3068/69"
+ select CONFIG_H83068
help
AKI-H8/3068F / AKI-H8/3069F Flashmicom LAN Board Support
More Information. (Japanese Only)
@@ -21,6 +24,7 @@ config H8300H_AKI3068NET
config H8300H_H8MAX
bool "H8MAX"
+ select CONFIG_H83068
help
H8MAX Evaluation Board Support
More Information. (Japanese Only)
@@ -28,6 +32,7 @@ config H8300H_H8MAX
config H8300H_SIM
bool "H8/300H Simulator"
+ select CONFIG_H83007
help
GDB Simulator Support
More Information.
@@ -40,6 +45,7 @@ config H8S_GENERIC
config H8S_EDOSK2674
bool "EDOSK-2674"
+ select CONFIG_H8S2768
help
Renesas EDOSK-2674 Evaluation Board Support
More Information.
@@ -55,44 +61,37 @@ config H8S_SIM
endchoice
-if (H8300H_GENERIC || H8S_GENERIC)
-menu "Detail Selection"
-if (H8300H_GENERIC)
choice
prompt "CPU Selection"
config H83002
bool "H8/3001,3002,3003"
+ select CPU_H8300H
config H83007
bool "H8/3006,3007"
+ select CPU_H8300H
config H83048
bool "H8/3044,3045,3046,3047,3048,3052"
+ select CPU_H8300H
config H83068
bool "H8/3065,3066,3067,3068,3069"
-endchoice
-endif
-
-if (H8S_GENERIC)
-choice
- prompt "CPU Selection"
+ select CPU_H8300H
config H8S2678
bool "H8S/2670,2673,2674R,2675,2676"
+ select CPU_H8S
+
endchoice
-endif
config CPU_CLOCK
int "CPU Clock Frequency (/1KHz)"
default "20000"
help
CPU Clock Frequency divide to 1000
-endmenu
-endif
-if (H8300H_GENERIC || H8S_GENERIC || H8300H_SIM || H8S_SIM || H8S_EDOSK2674)
choice
prompt "Kernel executes from"
---help---
@@ -107,75 +106,61 @@ config ROMKERNEL
bool "ROM"
help
The kernel will be resident in FLASH/ROM when running.
-
endchoice
-endif
-if (H8300H_AKI3068NET)
-config H83068
- bool
- default y
-config CPU_CLOCK
- int
- default "20000"
-
-config RAMKERNEL
+config CPU_H8300H
bool
+ depends on (H83002 || H83007 || H83048 || H83068)
default y
-endif
-if (H8300H_H8MAX)
-config H83068
+config CPU_H8S
bool
+ depends on H8S2678
default y
-config CPU_CLOCK
- int
- default 25000
+choice
+ prompt "Timer"
+config H8300_TIMER8
+ bool "8bit timer (2ch cascade)"
+ depends on (H83007 || H83068 || H8S2678)
-config RAMKERNEL
- bool
- default y
-endif
+config H8300_TIMER16
+ bool "16bit timer"
+ depends on (H83007 || H83068)
-if (H8300H_SIM)
-config H83007
- bool
- default y
+config H8300_ITU
+ bool "ITU"
+ depends on (H83002 || H83048)
-config CPU_CLOCK
- int
- default "16000"
-endif
+config H8300_TPU
+ bool "TPU"
+ depends on H8S2678
+endchoice
-if (H8S_EDOSK2674)
-config H8S2678
- bool
- default y
-config CPU_CLOCK
- int
- default 33000
+if H8300_TIMER8
+choice
+ prompt "Timer Channel"
+config H8300_TIMER8_CH0
+ bool "Channel 0"
+config H8300_TIMER8_CH2
+ bool "Channel 2"
+ depends on CPU_H8300H
+endchoice
endif
-if (H8S_SIM)
-config H8S2678
- bool
- default y
-config CPU_CLOCK
- int
- default 33000
-endif
+config H8300_TIMER16_CH
+ int "16bit timer channel (0 - 2)"
+ depends on H8300_TIMER16
+ range 0 2
-config CPU_H8300H
- bool
- depends on (H83002 || H83007 || H83048 || H83068)
- default y
+config H8300_ITU_CH
+ int "ITU channel"
+ depends on H8300_ITU
-config CPU_H8S
- bool
- depends on H8S2678
- default y
+config H8300_TPU_CH
+ int "TPU channel"
+ depends on H8300_TPU
config PREEMPT
bool "Preemptible Kernel"
diff --git a/arch/h8300/kernel/Makefile b/arch/h8300/kernel/Makefile
index 6c248c3..8d4d2a5 100644
--- a/arch/h8300/kernel/Makefile
+++ b/arch/h8300/kernel/Makefile
@@ -7,6 +7,6 @@ extra-y := vmlinux.lds
obj-y := process.o traps.o ptrace.o irq.o \
sys_h8300.o time.o signal.o \
setup.o gpio.o init_task.o syscalls.o \
- entry.o
+ entry.o timer/
obj-$(CONFIG_MODULES) += module.o h8300_ksyms.o
diff --git a/arch/h8300/kernel/time.c b/arch/h8300/kernel/time.c
index d0d2f26..14e06f9 100644
--- a/arch/h8300/kernel/time.c
+++ b/arch/h8300/kernel/time.c
@@ -27,27 +27,21 @@
#include <linux/profile.h>
#include <asm/io.h>
-#include <asm/target_time.h>
+#include <asm/timer.h>
#define TICK_SIZE (tick_nsec / 1000)
-/*
- * timer_interrupt() needs to keep up the real-time clock,
- * as well as call the "do_timer()" routine every clocktick
- */
-static void timer_interrupt(int irq, void *dummy, struct pt_regs * regs)
+void h8300_timer_tick(void)
{
- /* may need to kick the hardware timer */
- platform_timer_eoi();
-
+ if (current->pid)
+ profile_tick(CPU_PROFILING);
+ write_seqlock(&xtime_lock);
do_timer(1);
-#ifndef CONFIG_SMP
- update_process_times(user_mode(regs));
-#endif
- profile_tick(CPU_PROFILING);
+ write_sequnlock(&xtime_lock);
+ update_process_times(user_mode(get_irq_regs()));
}
-void time_init(void)
+void __init time_init(void)
{
unsigned int year, mon, day, hour, min, sec;
@@ -57,12 +51,13 @@
year = 1980;
mon = day = 1;
hour = min = sec = 0;
- platform_gettod (&year, &mon, &day, &hour, &min, &sec);
-
+#ifdef CONFIG_H8300_GETTOD
+ h8300_gettod (&year, &mon, &day, &hour, &min, &sec);
+#endif
if ((year += 1900) < 1970)
year += 100;
xtime.tv_sec = mktime(year, mon, day, hour, min, sec);
xtime.tv_nsec = 0;
- platform_timer_setup(timer_interrupt);
+ h8300_timer_setup();
}
diff --git a/include/asm-h8300/io.h b/include/asm-h8300/io.h
index 26dc6cc..34d1d3b 100644
--- a/include/asm-h8300/io.h
+++ b/include/asm-h8300/io.h
@@ -295,6 +295,40 @@ static __inline__ void ctrl_outl(unsigned long b, unsigned long addr)
*(volatile unsigned long*)addr = b;
}
+static __inline__ void ctrl_bclr(int b, unsigned long addr)
+{
+ if (__builtin_constant_p(b))
+ switch (b) {
+ case 0: __asm__("bclr #0,@%0"::"r"(addr)); break;
+ case 1: __asm__("bclr #1,@%0"::"r"(addr)); break;
+ case 2: __asm__("bclr #2,@%0"::"r"(addr)); break;
+ case 3: __asm__("bclr #3,@%0"::"r"(addr)); break;
+ case 4: __asm__("bclr #4,@%0"::"r"(addr)); break;
+ case 5: __asm__("bclr #5,@%0"::"r"(addr)); break;
+ case 6: __asm__("bclr #6,@%0"::"r"(addr)); break;
+ case 7: __asm__("bclr #7,@%0"::"r"(addr)); break;
+ }
+ else
+ __asm__("bclr %w0,@%1"::"r"(b), "r"(addr));
+}
+
+static __inline__ void ctrl_bset(int b, unsigned long addr)
+{
+ if (__builtin_constant_p(b))
+ switch (b) {
+ case 0: __asm__("bset #0,@%0"::"r"(addr)); break;
+ case 1: __asm__("bset #1,@%0"::"r"(addr)); break;
+ case 2: __asm__("bset #2,@%0"::"r"(addr)); break;
+ case 3: __asm__("bset #3,@%0"::"r"(addr)); break;
+ case 4: __asm__("bset #4,@%0"::"r"(addr)); break;
+ case 5: __asm__("bset #5,@%0"::"r"(addr)); break;
+ case 6: __asm__("bset #6,@%0"::"r"(addr)); break;
+ case 7: __asm__("bset #7,@%0"::"r"(addr)); break;
+ }
+ else
+ __asm__("bset %w0,@%1"::"r"(b), "r"(addr));
+}
+
/* Pages to physical address... */
#define page_to_phys(page) ((page - mem_map) << PAGE_SHIFT)
#define page_to_bus(page) ((page - mem_map) << PAGE_SHIFT)
--
Yoshinori Sato
<ysato@users.sourceforge.jp>
^ permalink raw reply related [flat|nested] only message in thread
only message in thread, other threads:[~2008-08-03 4:34 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2008-08-03 4:33 [PATCH 3/3] h8300 update timer handler - misc update Yoshinori Sato
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.