From: "Rafał Miłecki" <zajec5@gmail.com>
To: Christian Lamparter <chunkeey@gmail.com>,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
bcm-kernel-feedback-list@broadcom.com
Cc: Florian Fainelli <f.fainelli@gmail.com>,
Hauke Mehrtens <hauke@hauke-m.de>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>
Subject: Re: [PATCH v1 2/3] ARM: MR26: fix dt schema violations
Date: Mon, 5 Jun 2023 12:58:23 +0200 [thread overview]
Message-ID: <87db0e40-0fa3-47e0-2a50-c0ec908eed58@gmail.com> (raw)
In-Reply-To: <c2f56e4fb234418be45e640faf67f04ae66401b6.1685801691.git.chunkeey@gmail.com>
Hi,
I've include "BCM5301X: " in the subject line.
See below too.
On 3.06.2023 16:16, Christian Lamparter wrote:
> fixes the "duplex-full" typo, adds phy-modes for the internal
> switch and the PHY-chip. This also includs adding pause support
> for the internal cpu port. Furthermore, both erronous unit properties
> in the gpio-keys node are removed (#size-cells, #address-cells don't
> belong here).
>
> | ports:port@5:fixed-link: 'oneOf' conditional failed, one must be fixed:
> | 'anyOf' conditional failed, one must be fixed:
> | {'speed': [[1000]], 'duplex-full': True} is not of type 'array'
> | 'duplex-full' does not match any of the regexes
> | ports:port@5: 'phy-mode' is a required property
> | keys: '#address-cells', '#size-cells' do not match any of the regexes:
> | [...] From schema: gpio-keys.yaml
>
> Fixes: 935327a73553 ("ARM: dts: BCM5301X: Add DT for Meraki MR26")
> Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
> ---
> arch/arm/boot/dts/bcm53015-meraki-mr26.dts | 7 ++++---
> 1 file changed, 4 insertions(+), 3 deletions(-)
>
> diff --git a/arch/arm/boot/dts/bcm53015-meraki-mr26.dts b/arch/arm/boot/dts/bcm53015-meraki-mr26.dts
> index 9ea4ffc1bb71..9acadf393dd9 100644
> --- a/arch/arm/boot/dts/bcm53015-meraki-mr26.dts
> +++ b/arch/arm/boot/dts/bcm53015-meraki-mr26.dts
> @@ -38,8 +38,6 @@ led-1 {
>
> keys {
> compatible = "gpio-keys";
> - #address-cells = <1>;
> - #size-cells = <0>;
FWIW I've already sent patch for that:
[PATCH 2/2] ARM: dts: BCM5301X: Drop invalid properties from Meraki MR32 keys
> key-restart {
> label = "Reset";
> @@ -127,16 +125,19 @@ ports {
> port@0 {
> reg = <0>;
> label = "poe";
> + phy-mode = "rgmii";
> };
It was never clear to me how to exactly specify "phy-mode".
It'd values are documented in the:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/devicetree/bindings/net/ethernet-controller.yaml
In Broadcom's bcmrobo.c we can find:
#define PAGE_GPHY_MII_P0 0x10 /* Port0 Internal GPHY MII registers page */
#define PAGE_GPHY_MII_P4 0x14 /* Last/Port4 Internal GPHY MII registers page */
That suggests ports 0, 1, 2, 3 and 4 use internal MII.
Does it make "rgmii" a valid value for that?
Could we just specify a proper value for all 5 ports in the bcm-ns.dtsi?
> port@5 {
> reg = <5>;
> label = "cpu";
> ethernet = <&gmac0>;
> + phy-mode = "internal";
>
> fixed-link {
> speed = <1000>;
> - duplex-full;
> + full-duplex;
> + pause;
> };
> };
> };
Same here: could we specify "phy-mode" and "fixed-link" for ports 5, 7
and 8 in the bcm-ns.dtsi? There are more devices with warnings:
DTC_CHK arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp.dtb
/home/rmilecki/linux/linux-next/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp.dtb: ethernet-switch@18007000: ports:port@5: 'phy-mode' is a required property
From schema: /home/rmilecki/linux/linux-next/Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml
DTC_CHK arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp2.dtb
/home/rmilecki/linux/linux-next/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp2.dtb: ethernet-switch@18007000: ports:port@5: 'phy-mode' is a required property
From schema: /home/rmilecki/linux/linux-next/Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml
DTC_CHK arch/arm/boot/dts/bcm4708-luxul-xap-1510.dtb
/home/rmilecki/linux/linux-next/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dtb: ethernet-switch@18007000: ports:port@5: 'phy-mode' is a required property
From schema: /home/rmilecki/linux/linux-next/Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml
DTC_CHK arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dtb
/home/rmilecki/linux/linux-next/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dtb: ethernet-switch@18007000: ports:port@5: 'phy-mode' is a required property
From schema: /home/rmilecki/linux/linux-next/Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml
DTC_CHK arch/arm/boot/dts/bcm4708-netgear-r6250.dtb
/home/rmilecki/linux/linux-next/arch/arm/boot/dts/bcm4708-netgear-r6250.dtb: ethernet-switch@18007000: ports:port@5: 'phy-mode' is a required property
From schema: /home/rmilecki/linux/linux-next/Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml
DTC_CHK arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dtb
/home/rmilecki/linux/linux-next/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dtb: ethernet-switch@18007000: ports:port@5: 'phy-mode' is a required property
From schema: /home/rmilecki/linux/linux-next/Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml
DTC_CHK arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dtb
/home/rmilecki/linux/linux-next/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dtb: ethernet-switch@18007000: ports:port@5: 'phy-mode' is a required property
From schema: /home/rmilecki/linux/linux-next/Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml
DTC_CHK arch/arm/boot/dts/bcm47081-luxul-xap-1410.dtb
/home/rmilecki/linux/linux-next/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dtb: ethernet-switch@18007000: ports:port@5: 'phy-mode' is a required property
From schema: /home/rmilecki/linux/linux-next/Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml
DTC_CHK arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dtb
/home/rmilecki/linux/linux-next/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dtb: ethernet-switch@18007000: ports:port@5: 'phy-mode' is a required property
From schema: /home/rmilecki/linux/linux-next/Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml
DTC_CHK arch/arm/boot/dts/bcm4709-netgear-r8000.dtb
/home/rmilecki/linux/linux-next/arch/arm/boot/dts/bcm4709-netgear-r8000.dtb: ethernet-switch@18007000: ports:port@8: 'phy-mode' is a required property
From schema: /home/rmilecki/linux/linux-next/Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml
DTC_CHK arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dtb
/home/rmilecki/linux/linux-next/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dtb: ethernet-switch@18007000: ports:port@7: 'phy-mode' is a required property
From schema: /home/rmilecki/linux/linux-next/Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml
/home/rmilecki/linux/linux-next/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dtb: ethernet-switch@18007000: ports:port@8: 'phy-mode' is a required property
From schema: /home/rmilecki/linux/linux-next/Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml
DTC_CHK arch/arm/boot/dts/bcm47094-dlink-dir-885l.dtb
/home/rmilecki/linux/linux-next/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dtb: ethernet-switch@18007000: ports:port@8: 'phy-mode' is a required property
From schema: /home/rmilecki/linux/linux-next/Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml
DTC_CHK arch/arm/boot/dts/bcm47094-linksys-panamera.dtb
/home/rmilecki/linux/linux-next/arch/arm/boot/dts/bcm47094-linksys-panamera.dtb: ethernet-switch@18007000: ports:port@8: 'phy-mode' is a required property
From schema: /home/rmilecki/linux/linux-next/Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml
/home/rmilecki/linux/linux-next/arch/arm/boot/dts/bcm47094-linksys-panamera.dtb: switch@0: ports:port@8: 'phy-mode' is a required property
From schema: /home/rmilecki/linux/linux-next/Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml
DTC_CHK arch/arm/boot/dts/bcm47094-luxul-abr-4500.dtb
/home/rmilecki/linux/linux-next/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dtb: ethernet-switch@18007000: ports:port@5: 'phy-mode' is a required property
From schema: /home/rmilecki/linux/linux-next/Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml
DTC_CHK arch/arm/boot/dts/bcm47094-luxul-xap-1610.dtb
/home/rmilecki/linux/linux-next/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dtb: ethernet-switch@18007000: ports:port@5: 'phy-mode' is a required property
From schema: /home/rmilecki/linux/linux-next/Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml
DTC_CHK arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dtb
/home/rmilecki/linux/linux-next/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dtb: ethernet-switch@18007000: ports:port@5: 'phy-mode' is a required property
From schema: /home/rmilecki/linux/linux-next/Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml
DTC_CHK arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dtb
/home/rmilecki/linux/linux-next/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dtb: ethernet-switch@18007000: ports:port@5: 'phy-mode' is a required property
From schema: /home/rmilecki/linux/linux-next/Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml
DTC_CHK arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dtb
/home/rmilecki/linux/linux-next/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dtb: ethernet-switch@18007000: ports:port@5: 'phy-mode' is a required property
From schema: /home/rmilecki/linux/linux-next/Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml
DTC_CHK arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dtb
/home/rmilecki/linux/linux-next/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dtb: ethernet-switch@18007000: ports:port@5: 'phy-mode' is a required property
From schema: /home/rmilecki/linux/linux-next/Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml
DTC_CHK arch/arm/boot/dts/bcm53015-meraki-mr26.dtb
/home/rmilecki/linux/linux-next/arch/arm/boot/dts/bcm53015-meraki-mr26.dtb: ethernet-switch@18007000: ports:port@5: 'phy-mode' is a required property
From schema: /home/rmilecki/linux/linux-next/Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml
DTC_CHK arch/arm/boot/dts/bcm53016-meraki-mr32.dtb
/home/rmilecki/linux/linux-next/arch/arm/boot/dts/bcm53016-meraki-mr32.dtb: ethernet-switch@18007000: ports:port@5: 'phy-mode' is a required property
From schema: /home/rmilecki/linux/linux-next/Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml
DTC_CHK arch/arm/boot/dts/bcm953012er.dtb
/home/rmilecki/linux/linux-next/arch/arm/boot/dts/bcm953012er.dtb: ethernet-switch@18007000: ports:port@5: 'phy-mode' is a required property
From schema: /home/rmilecki/linux/linux-next/Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: "Rafał Miłecki" <zajec5@gmail.com>
To: Christian Lamparter <chunkeey@gmail.com>,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
bcm-kernel-feedback-list@broadcom.com
Cc: Florian Fainelli <f.fainelli@gmail.com>,
Hauke Mehrtens <hauke@hauke-m.de>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>
Subject: Re: [PATCH v1 2/3] ARM: MR26: fix dt schema violations
Date: Mon, 5 Jun 2023 12:58:23 +0200 [thread overview]
Message-ID: <87db0e40-0fa3-47e0-2a50-c0ec908eed58@gmail.com> (raw)
In-Reply-To: <c2f56e4fb234418be45e640faf67f04ae66401b6.1685801691.git.chunkeey@gmail.com>
Hi,
I've include "BCM5301X: " in the subject line.
See below too.
On 3.06.2023 16:16, Christian Lamparter wrote:
> fixes the "duplex-full" typo, adds phy-modes for the internal
> switch and the PHY-chip. This also includs adding pause support
> for the internal cpu port. Furthermore, both erronous unit properties
> in the gpio-keys node are removed (#size-cells, #address-cells don't
> belong here).
>
> | ports:port@5:fixed-link: 'oneOf' conditional failed, one must be fixed:
> | 'anyOf' conditional failed, one must be fixed:
> | {'speed': [[1000]], 'duplex-full': True} is not of type 'array'
> | 'duplex-full' does not match any of the regexes
> | ports:port@5: 'phy-mode' is a required property
> | keys: '#address-cells', '#size-cells' do not match any of the regexes:
> | [...] From schema: gpio-keys.yaml
>
> Fixes: 935327a73553 ("ARM: dts: BCM5301X: Add DT for Meraki MR26")
> Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
> ---
> arch/arm/boot/dts/bcm53015-meraki-mr26.dts | 7 ++++---
> 1 file changed, 4 insertions(+), 3 deletions(-)
>
> diff --git a/arch/arm/boot/dts/bcm53015-meraki-mr26.dts b/arch/arm/boot/dts/bcm53015-meraki-mr26.dts
> index 9ea4ffc1bb71..9acadf393dd9 100644
> --- a/arch/arm/boot/dts/bcm53015-meraki-mr26.dts
> +++ b/arch/arm/boot/dts/bcm53015-meraki-mr26.dts
> @@ -38,8 +38,6 @@ led-1 {
>
> keys {
> compatible = "gpio-keys";
> - #address-cells = <1>;
> - #size-cells = <0>;
FWIW I've already sent patch for that:
[PATCH 2/2] ARM: dts: BCM5301X: Drop invalid properties from Meraki MR32 keys
> key-restart {
> label = "Reset";
> @@ -127,16 +125,19 @@ ports {
> port@0 {
> reg = <0>;
> label = "poe";
> + phy-mode = "rgmii";
> };
It was never clear to me how to exactly specify "phy-mode".
It'd values are documented in the:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/devicetree/bindings/net/ethernet-controller.yaml
In Broadcom's bcmrobo.c we can find:
#define PAGE_GPHY_MII_P0 0x10 /* Port0 Internal GPHY MII registers page */
#define PAGE_GPHY_MII_P4 0x14 /* Last/Port4 Internal GPHY MII registers page */
That suggests ports 0, 1, 2, 3 and 4 use internal MII.
Does it make "rgmii" a valid value for that?
Could we just specify a proper value for all 5 ports in the bcm-ns.dtsi?
> port@5 {
> reg = <5>;
> label = "cpu";
> ethernet = <&gmac0>;
> + phy-mode = "internal";
>
> fixed-link {
> speed = <1000>;
> - duplex-full;
> + full-duplex;
> + pause;
> };
> };
> };
Same here: could we specify "phy-mode" and "fixed-link" for ports 5, 7
and 8 in the bcm-ns.dtsi? There are more devices with warnings:
DTC_CHK arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp.dtb
/home/rmilecki/linux/linux-next/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp.dtb: ethernet-switch@18007000: ports:port@5: 'phy-mode' is a required property
From schema: /home/rmilecki/linux/linux-next/Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml
DTC_CHK arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp2.dtb
/home/rmilecki/linux/linux-next/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp2.dtb: ethernet-switch@18007000: ports:port@5: 'phy-mode' is a required property
From schema: /home/rmilecki/linux/linux-next/Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml
DTC_CHK arch/arm/boot/dts/bcm4708-luxul-xap-1510.dtb
/home/rmilecki/linux/linux-next/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dtb: ethernet-switch@18007000: ports:port@5: 'phy-mode' is a required property
From schema: /home/rmilecki/linux/linux-next/Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml
DTC_CHK arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dtb
/home/rmilecki/linux/linux-next/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dtb: ethernet-switch@18007000: ports:port@5: 'phy-mode' is a required property
From schema: /home/rmilecki/linux/linux-next/Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml
DTC_CHK arch/arm/boot/dts/bcm4708-netgear-r6250.dtb
/home/rmilecki/linux/linux-next/arch/arm/boot/dts/bcm4708-netgear-r6250.dtb: ethernet-switch@18007000: ports:port@5: 'phy-mode' is a required property
From schema: /home/rmilecki/linux/linux-next/Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml
DTC_CHK arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dtb
/home/rmilecki/linux/linux-next/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dtb: ethernet-switch@18007000: ports:port@5: 'phy-mode' is a required property
From schema: /home/rmilecki/linux/linux-next/Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml
DTC_CHK arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dtb
/home/rmilecki/linux/linux-next/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dtb: ethernet-switch@18007000: ports:port@5: 'phy-mode' is a required property
From schema: /home/rmilecki/linux/linux-next/Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml
DTC_CHK arch/arm/boot/dts/bcm47081-luxul-xap-1410.dtb
/home/rmilecki/linux/linux-next/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dtb: ethernet-switch@18007000: ports:port@5: 'phy-mode' is a required property
From schema: /home/rmilecki/linux/linux-next/Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml
DTC_CHK arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dtb
/home/rmilecki/linux/linux-next/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dtb: ethernet-switch@18007000: ports:port@5: 'phy-mode' is a required property
From schema: /home/rmilecki/linux/linux-next/Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml
DTC_CHK arch/arm/boot/dts/bcm4709-netgear-r8000.dtb
/home/rmilecki/linux/linux-next/arch/arm/boot/dts/bcm4709-netgear-r8000.dtb: ethernet-switch@18007000: ports:port@8: 'phy-mode' is a required property
From schema: /home/rmilecki/linux/linux-next/Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml
DTC_CHK arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dtb
/home/rmilecki/linux/linux-next/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dtb: ethernet-switch@18007000: ports:port@7: 'phy-mode' is a required property
From schema: /home/rmilecki/linux/linux-next/Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml
/home/rmilecki/linux/linux-next/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dtb: ethernet-switch@18007000: ports:port@8: 'phy-mode' is a required property
From schema: /home/rmilecki/linux/linux-next/Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml
DTC_CHK arch/arm/boot/dts/bcm47094-dlink-dir-885l.dtb
/home/rmilecki/linux/linux-next/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dtb: ethernet-switch@18007000: ports:port@8: 'phy-mode' is a required property
From schema: /home/rmilecki/linux/linux-next/Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml
DTC_CHK arch/arm/boot/dts/bcm47094-linksys-panamera.dtb
/home/rmilecki/linux/linux-next/arch/arm/boot/dts/bcm47094-linksys-panamera.dtb: ethernet-switch@18007000: ports:port@8: 'phy-mode' is a required property
From schema: /home/rmilecki/linux/linux-next/Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml
/home/rmilecki/linux/linux-next/arch/arm/boot/dts/bcm47094-linksys-panamera.dtb: switch@0: ports:port@8: 'phy-mode' is a required property
From schema: /home/rmilecki/linux/linux-next/Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml
DTC_CHK arch/arm/boot/dts/bcm47094-luxul-abr-4500.dtb
/home/rmilecki/linux/linux-next/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dtb: ethernet-switch@18007000: ports:port@5: 'phy-mode' is a required property
From schema: /home/rmilecki/linux/linux-next/Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml
DTC_CHK arch/arm/boot/dts/bcm47094-luxul-xap-1610.dtb
/home/rmilecki/linux/linux-next/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dtb: ethernet-switch@18007000: ports:port@5: 'phy-mode' is a required property
From schema: /home/rmilecki/linux/linux-next/Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml
DTC_CHK arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dtb
/home/rmilecki/linux/linux-next/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dtb: ethernet-switch@18007000: ports:port@5: 'phy-mode' is a required property
From schema: /home/rmilecki/linux/linux-next/Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml
DTC_CHK arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dtb
/home/rmilecki/linux/linux-next/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dtb: ethernet-switch@18007000: ports:port@5: 'phy-mode' is a required property
From schema: /home/rmilecki/linux/linux-next/Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml
DTC_CHK arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dtb
/home/rmilecki/linux/linux-next/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dtb: ethernet-switch@18007000: ports:port@5: 'phy-mode' is a required property
From schema: /home/rmilecki/linux/linux-next/Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml
DTC_CHK arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dtb
/home/rmilecki/linux/linux-next/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dtb: ethernet-switch@18007000: ports:port@5: 'phy-mode' is a required property
From schema: /home/rmilecki/linux/linux-next/Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml
DTC_CHK arch/arm/boot/dts/bcm53015-meraki-mr26.dtb
/home/rmilecki/linux/linux-next/arch/arm/boot/dts/bcm53015-meraki-mr26.dtb: ethernet-switch@18007000: ports:port@5: 'phy-mode' is a required property
From schema: /home/rmilecki/linux/linux-next/Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml
DTC_CHK arch/arm/boot/dts/bcm53016-meraki-mr32.dtb
/home/rmilecki/linux/linux-next/arch/arm/boot/dts/bcm53016-meraki-mr32.dtb: ethernet-switch@18007000: ports:port@5: 'phy-mode' is a required property
From schema: /home/rmilecki/linux/linux-next/Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml
DTC_CHK arch/arm/boot/dts/bcm953012er.dtb
/home/rmilecki/linux/linux-next/arch/arm/boot/dts/bcm953012er.dtb: ethernet-switch@18007000: ports:port@5: 'phy-mode' is a required property
From schema: /home/rmilecki/linux/linux-next/Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml
next prev parent reply other threads:[~2023-06-05 10:59 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-06-03 14:16 [PATCH v1 1/3] ARM: MR26: MR32: remove bogus nand-ecc-algo property Christian Lamparter
2023-06-03 14:16 ` Christian Lamparter
2023-06-03 14:16 ` [PATCH v1 2/3] ARM: MR26: fix dt schema violations Christian Lamparter
2023-06-03 14:16 ` Christian Lamparter
2023-06-05 10:58 ` Rafał Miłecki [this message]
2023-06-05 10:58 ` Rafał Miłecki
2023-06-05 20:30 ` Christian Lamparter
2023-06-05 20:30 ` Christian Lamparter
2023-06-03 14:16 ` [PATCH v1 3/3] ARM: MR32: " Christian Lamparter
2023-06-03 14:16 ` Christian Lamparter
2023-06-05 11:19 ` [PATCH v1 1/3] ARM: MR26: MR32: remove bogus nand-ecc-algo property Rafał Miłecki
2023-06-05 11:19 ` Rafał Miłecki
2023-06-05 21:01 ` Christian Lamparter
2023-06-05 21:01 ` Christian Lamparter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87db0e40-0fa3-47e0-2a50-c0ec908eed58@gmail.com \
--to=zajec5@gmail.com \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=chunkeey@gmail.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=f.fainelli@gmail.com \
--cc=hauke@hauke-m.de \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.