* [PATCH v5 2/3] wifi: mac80211: allow userspace to enable driver control of MU-EDCA
2023-04-27 18:31 [PATCH v5 1/3] wifi: cfg80211: allow userspace to enable driver control of MU-EDCA Muna Sinada
@ 2023-04-27 18:31 ` Muna Sinada
2023-04-27 18:31 ` [PATCH v5 3/3] cfg80211: Handle driver updated MU-EDCA params Muna Sinada
1 sibling, 0 replies; 4+ messages in thread
From: Muna Sinada @ 2023-04-27 18:31 UTC (permalink / raw)
To: johannes; +Cc: linux-wireless, Muna Sinada
Propagate userspace configuration to enable or disable if driver is
able to dynamically update MU-EDCA parameters.
The updated MU-EDCA parameters from driver are part of an AP mode feature
where firmware determines better MU-EDCA parameters based on channel
conditions. The updated parameters are used and reported to user space
to reflect in AP management frames. These dynamic parameter updates
are offloaded to firmware for better user experience, thus details on
algorithm are not provided. This is a driver specific feature, thus
no spec references.
Signed-off-by: Muna Sinada <quic_msinada@quicinc.com>
---
v5: no change
v4: newly created patch in response to review comment to add opt in
for user for this feature
---
include/net/mac80211.h | 6 ++++++
net/mac80211/cfg.c | 5 +++++
2 files changed, 11 insertions(+)
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 679421d37a42..70acd76ce450 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -376,6 +376,7 @@ enum ieee80211_bss_change {
BSS_CHANGED_FILS_DISCOVERY = 1<<30,
BSS_CHANGED_UNSOL_BCAST_PROBE_RESP = 1<<31,
BSS_CHANGED_EHT_PUNCTURING = BIT_ULL(32),
+ BSS_CHANGED_DYNAMIC_MU_EDCA = BIT_ULL(33),
/* when adding here, make sure to change ieee80211_reconfig */
};
@@ -683,6 +684,9 @@ struct ieee80211_fils_discovery {
* beamformee
* @eht_mu_beamformer: in AP-mode, does this BSS enable operation as an EHT MU
* beamformer
+ * @dyn_muedca_enabled: whether to enable or disable driver control of MU-EDCA
+ * parameters. If set to zero, driver dynamically updating parameters is
+ * disabled; if set to 1, driver dynamically updating parameters is enable
*/
struct ieee80211_bss_conf {
struct ieee80211_vif *vif;
@@ -776,6 +780,8 @@ struct ieee80211_bss_conf {
bool eht_su_beamformer;
bool eht_su_beamformee;
bool eht_mu_beamformer;
+
+ int dyn_muedca_enabled;
};
/**
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index 473915606715..ff9117c1c288 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -1465,6 +1465,11 @@ static int ieee80211_start_ap(struct wiphy *wiphy, struct net_device *dev,
changed |= BSS_CHANGED_UNSOL_BCAST_PROBE_RESP;
}
+ if (link_conf->dyn_muedca_enabled != params->dyn_muedca_enable) {
+ link_conf->dyn_muedca_enabled = params->dyn_muedca_enable;
+ changed |= BSS_CHANGED_DYNAMIC_MU_EDCA;
+ }
+
err = drv_start_ap(sdata->local, sdata, link_conf);
if (err) {
old = sdata_dereference(link->u.ap.beacon, sdata);
--
2.7.4
^ permalink raw reply related [flat|nested] 4+ messages in thread* [PATCH v5 3/3] cfg80211: Handle driver updated MU-EDCA params
2023-04-27 18:31 [PATCH v5 1/3] wifi: cfg80211: allow userspace to enable driver control of MU-EDCA Muna Sinada
2023-04-27 18:31 ` [PATCH v5 2/3] wifi: mac80211: " Muna Sinada
@ 2023-04-27 18:31 ` Muna Sinada
2023-04-28 8:12 ` Kalle Valo
1 sibling, 1 reply; 4+ messages in thread
From: Muna Sinada @ 2023-04-27 18:31 UTC (permalink / raw)
To: johannes; +Cc: linux-wireless, Muna Sinada
Add necessary functions and attributes to receive updated MU-EDCA
parameters from driver and send to user space, where management
frame are updated to reflect latest parameters.
The updated parameters from driver are part of an AP mode feature
where firmware determines better MU-EDCA parameters based on channel
conditions. The updated parameters are used and reported to user space
to reflect in AP management frames. These dynamic parameter updates
are offloaded to firmware for better user experience, thus details on
algorithm are not provided. This is a driver specific feature, thus
no spec references.
Signed-off-by: Muna Sinada <quic_msinada@quicinc.com>
---
v5: Fixed build error from trace event
(cfg80211_update_muedca_params_event)
v4: Added tracing and added nla policy for new nl attr
v3: modified commit message
---
include/net/cfg80211.h | 12 ++++++++++++
include/uapi/linux/nl80211.h | 11 +++++++++++
net/wireless/nl80211.c | 40 ++++++++++++++++++++++++++++++++++++++++
net/wireless/trace.h | 40 ++++++++++++++++++++++++++++++++++++++++
4 files changed, 103 insertions(+)
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index e56af095828e..fe4f416b85e1 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -9070,4 +9070,16 @@ static inline int cfg80211_color_change_notify(struct net_device *dev)
bool cfg80211_valid_disable_subchannel_bitmap(u16 *bitmap,
const struct cfg80211_chan_def *chandef);
+/**
+ * cfg80211_update_muedca_params_event - Notify userspace about updated
+ * MU-EDCA parameters
+ *
+ * @wiphy: the wiphy
+ * @params: Updated MU-EDCA parameters
+ * @gfp: allocation flags
+ */
+void cfg80211_update_muedca_params_event(struct wiphy *wiphy,
+ const struct ieee80211_mu_edca_param_set *params,
+ gfp_t gfp);
+
#endif /* __NET_CFG80211_H */
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index e68169130e7e..51c8a94bc411 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -1309,6 +1309,11 @@
* The number of peers that HW timestamping can be enabled for concurrently
* is indicated by %NL80211_ATTR_MAX_HW_TIMESTAMP_PEERS.
*
+ * @NL80211_CMD_UPDATE_HE_MUEDCA_PARAMS: Updated MU-EDCA parameters from
+ * driver. This event is used to update dynamic MU-EDCA parameters in
+ * management frames, coming from driver and now need to be reflected in
+ * management frames.
+ *
* @NL80211_CMD_MAX: highest used command number
* @__NL80211_CMD_AFTER_LAST: internal use
*/
@@ -1562,6 +1567,8 @@ enum nl80211_commands {
NL80211_CMD_SET_HW_TIMESTAMP,
+ NL80211_CMD_UPDATE_HE_MUEDCA_PARAMS,
+
/* add new commands above here */
/* used to define NL80211_CMD_MAX below */
@@ -2807,6 +2814,9 @@ enum nl80211_commands {
*
* @NL80211_ATTR_DYN_MUEDCA_ENABLE: Flag attribute to indicate user space has
* enabled Driver control of dynamically updating MU-EDCA parameters.
+ * @NL80211_ATTR_HE_MUEDCA_PARAMS: MU-EDCA AC parameters for the
+ * %NL80211_CMD_UPDATE_HE_MUEDCA_PARAMS command in format described in
+ * P802.11ax_D4.0 section 9.4.2.245
*
* @NUM_NL80211_ATTR: total number of nl80211_attrs available
* @NL80211_ATTR_MAX: highest attribute number currently defined
@@ -3345,6 +3355,7 @@ enum nl80211_attrs {
NL80211_ATTR_EMA_RNR_ELEMS,
NL80211_ATTR_DYN_MUEDCA_ENABLE,
+ NL80211_ATTR_HE_MUEDCA_PARAMS,
/* add attributes here, update the policy in nl80211.c */
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index e9e939706630..af36440f2a51 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -816,6 +816,8 @@ static const struct nla_policy nl80211_policy[NUM_NL80211_ATTR] = {
[NL80211_ATTR_HW_TIMESTAMP_ENABLED] = { .type = NLA_FLAG },
[NL80211_ATTR_EMA_RNR_ELEMS] = { .type = NLA_NESTED },
[NL80211_ATTR_DYN_MUEDCA_ENABLE] = { .type = NLA_FLAG },
+ [NL80211_ATTR_HE_MUEDCA_PARAMS] =
+ NLA_POLICY_EXACT_LEN(sizeof(struct ieee80211_mu_edca_param_set)),
};
/* policy for the key attributes */
@@ -20017,6 +20019,44 @@ void cfg80211_update_owe_info_event(struct net_device *netdev,
}
EXPORT_SYMBOL(cfg80211_update_owe_info_event);
+void
+cfg80211_update_muedca_params_event(struct wiphy *wiphy,
+ const struct ieee80211_mu_edca_param_set *params,
+ gfp_t gfp)
+{
+ struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy);
+ struct sk_buff *msg;
+ void *hdr;
+
+ trace_cfg80211_update_muedca_params_event(wiphy, params);
+
+ msg = nlmsg_new(NLMSG_DEFAULT_SIZE, gfp);
+ if (!msg)
+ return;
+
+ hdr = nl80211hdr_put(msg, 0, 0, 0, NL80211_CMD_UPDATE_HE_MUEDCA_PARAMS);
+ if (!hdr)
+ goto nla_put_failure;
+
+ if (nla_put_u32(msg, NL80211_ATTR_WIPHY, rdev->wiphy_idx))
+ goto nla_put_failure;
+
+ if (nla_put(msg, NL80211_ATTR_HE_MUEDCA_PARAMS,
+ sizeof(*params), params))
+ goto nla_put_failure;
+
+ genlmsg_end(msg, hdr);
+
+ genlmsg_multicast_netns(&nl80211_fam, wiphy_net(&rdev->wiphy), msg, 0,
+ NL80211_MCGRP_MLME, gfp);
+ return;
+
+nla_put_failure:
+ genlmsg_cancel(msg, hdr);
+ nlmsg_free(msg);
+}
+EXPORT_SYMBOL(cfg80211_update_muedca_params_event);
+
/* initialisation/exit functions */
int __init nl80211_init(void)
diff --git a/net/wireless/trace.h b/net/wireless/trace.h
index 716a1fa70069..3ac552be0129 100644
--- a/net/wireless/trace.h
+++ b/net/wireless/trace.h
@@ -3785,6 +3785,46 @@ TRACE_EVENT(cfg80211_update_owe_info_event,
__entry->assoc_link_id, __entry->peer_mld_addr)
);
+TRACE_EVENT(cfg80211_update_muedca_params_event,
+ TP_PROTO(struct wiphy *wiphy,
+ const struct ieee80211_mu_edca_param_set *params),
+ TP_ARGS(wiphy, params),
+ TP_STRUCT__entry(
+ WIPHY_ENTRY
+ __field(u8, mu_qos_info)
+ __field(u8, be_aifsn)
+ __field(u8, be_ecw_min_max)
+ __field(u8, be_mu_edca_timer)
+ __field(u8, bk_aifsn)
+ __field(u8, bk_ecw_min_max)
+ __field(u8, bk_mu_edca_timer)
+ __field(u8, vi_aifsn)
+ __field(u8, vi_ecw_min_max)
+ __field(u8, vi_mu_edca_timer)
+ __field(u8, vo_aifsn)
+ __field(u8, vo_ecw_min_max)
+ __field(u8, vo_mu_edca_timer)
+ ),
+ TP_fast_assign(
+ WIPHY_ASSIGN;
+ __entry->mu_qos_info = params->mu_qos_info;
+ __entry->be_aifsn = params->ac_be.aifsn;
+ __entry->be_ecw_min_max = params->ac_be.ecw_min_max;
+ __entry->be_mu_edca_timer = params->ac_be.mu_edca_timer;
+ __entry->bk_aifsn = params->ac_bk.aifsn;
+ __entry->bk_ecw_min_max = params->ac_bk.ecw_min_max;
+ __entry->bk_mu_edca_timer = params->ac_bk.mu_edca_timer;
+ __entry->vi_aifsn = params->ac_vi.aifsn;
+ __entry->vi_ecw_min_max = params->ac_vi.ecw_min_max;
+ __entry->vi_mu_edca_timer = params->ac_vi.mu_edca_timer;
+ __entry->vo_aifsn = params->ac_vo.aifsn;
+ __entry->vo_ecw_min_max = params->ac_vo.ecw_min_max;
+ __entry->vo_mu_edca_timer = params->ac_vo.mu_edca_timer;
+ ),
+ TP_printk(WIPHY_PR_FMT ", MU QOS info: %u", WIPHY_PR_ARG,
+ __entry->mu_qos_info)
+);
+
TRACE_EVENT(cfg80211_bss_color_notify,
TP_PROTO(struct net_device *netdev,
enum nl80211_commands cmd,
--
2.7.4
^ permalink raw reply related [flat|nested] 4+ messages in thread