From: Yoshinori Sato <ysato@users.sourceforge.jp>
To: Rich Felker <dalias@libc.org>
Cc: linux-sh@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH RESEND 03/12] sh: Disable board specific code in OF mode
Date: Tue, 10 May 2016 07:28:23 +0000 [thread overview]
Message-ID: <87eg9ape20.wl-ysato@users.sourceforge.jp> (raw)
In-Reply-To: <20160504024941.GN21636@brightrain.aerifal.cx>
Sorry too late reply.
On Wed, 04 May 2016 11:49:41 +0900,
Rich Felker wrote:
>
> On Sun, May 01, 2016 at 02:08:27PM +0900, Yoshinori Sato wrote:
> > Board specific code conflict on of-generic.
> >
> > Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
> > ---
> > arch/sh/Makefile | 11 +++++++++++
> > 1 file changed, 11 insertions(+)
> >
> > diff --git a/arch/sh/Makefile b/arch/sh/Makefile
> > index bf5b3f5..8ff943b 100644
> > --- a/arch/sh/Makefile
> > +++ b/arch/sh/Makefile
> > @@ -130,6 +130,9 @@ head-y := arch/sh/kernel/head_$(BITS).o
> > core-y += arch/sh/kernel/ arch/sh/mm/ arch/sh/boards/
> > core-$(CONFIG_SH_FPU_EMU) += arch/sh/math-emu/
> >
> > +core-$(CONFIG_USE_BUILTIN_DTB) += arch/sh/boot/dts/
> > +
>
> It looks like you inadvertently mixed the builtin-dtb patch with this
> commit. Is yours based on the builtin-dtb patch I posted to the list
> or a different approach?
Oh sorry.
It changes same. I mistake origin version.
> > +ifneq ($(CONFIG_SH_DEVICE_TREE),y)
> > # Mach groups
> > machdir-$(CONFIG_SOLUTION_ENGINE) += mach-se
> > machdir-$(CONFIG_SH_HP6XX) += mach-hp6xx
> > @@ -150,6 +153,7 @@ machdir-$(CONFIG_SH_LANDISK) += mach-landisk
> > machdir-$(CONFIG_SH_LBOX_RE2) += mach-lboxre2
> > machdir-$(CONFIG_SH_CAYMAN) += mach-cayman
> > machdir-$(CONFIG_SH_RSK) += mach-rsk
> > +endif
>
> Is this actually necessary? I thought SH_DEVICE_TREE was mutually
> exclusive with board-specific configs at the Kconfig level. If not, it
> should probably be handled that way rather than with logic like this
> in the Makefile.
Hmm.
I think Kconfig level exclsive more better.
>
> > ifneq ($(machdir-y),)
> > core-y += $(addprefix arch/sh/boards/, \
> > @@ -222,6 +226,13 @@ archclean:
> > $(Q)$(MAKE) $(clean)=$(boot)
> > $(Q)$(MAKE) $(clean)=arch/sh/kernel/vsyscall
> >
> > +%.dtb %.dtb.S %.dtb.o: | scripts
> > + $(Q)$(MAKE) $(build)=arch/sh/boot/dts arch/sh/boot/dts/$@
> > +
> > +PHONY += dtbs
> > +dtbs: scripts
> > + $(Q)$(MAKE) $(build)=arch/sh/boot/dts
> > +
> > define archhelp
> > @echo ' zImage - Compressed kernel image'
> > @echo ' romImage - Compressed ROM image, if supported'
> > --
>
> More builtin-dtb stuff.
>
> Rich
--
Yoshinori Sato
<ysato@users.sourceforge.jp>
WARNING: multiple messages have this Message-ID (diff)
From: Yoshinori Sato <ysato@users.sourceforge.jp>
To: Rich Felker <dalias@libc.org>
Cc: linux-sh@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH RESEND 03/12] sh: Disable board specific code in OF mode
Date: Tue, 10 May 2016 16:28:23 +0900 [thread overview]
Message-ID: <87eg9ape20.wl-ysato@users.sourceforge.jp> (raw)
In-Reply-To: <20160504024941.GN21636@brightrain.aerifal.cx>
Sorry too late reply.
On Wed, 04 May 2016 11:49:41 +0900,
Rich Felker wrote:
>
> On Sun, May 01, 2016 at 02:08:27PM +0900, Yoshinori Sato wrote:
> > Board specific code conflict on of-generic.
> >
> > Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
> > ---
> > arch/sh/Makefile | 11 +++++++++++
> > 1 file changed, 11 insertions(+)
> >
> > diff --git a/arch/sh/Makefile b/arch/sh/Makefile
> > index bf5b3f5..8ff943b 100644
> > --- a/arch/sh/Makefile
> > +++ b/arch/sh/Makefile
> > @@ -130,6 +130,9 @@ head-y := arch/sh/kernel/head_$(BITS).o
> > core-y += arch/sh/kernel/ arch/sh/mm/ arch/sh/boards/
> > core-$(CONFIG_SH_FPU_EMU) += arch/sh/math-emu/
> >
> > +core-$(CONFIG_USE_BUILTIN_DTB) += arch/sh/boot/dts/
> > +
>
> It looks like you inadvertently mixed the builtin-dtb patch with this
> commit. Is yours based on the builtin-dtb patch I posted to the list
> or a different approach?
Oh sorry.
It changes same. I mistake origin version.
> > +ifneq ($(CONFIG_SH_DEVICE_TREE),y)
> > # Mach groups
> > machdir-$(CONFIG_SOLUTION_ENGINE) += mach-se
> > machdir-$(CONFIG_SH_HP6XX) += mach-hp6xx
> > @@ -150,6 +153,7 @@ machdir-$(CONFIG_SH_LANDISK) += mach-landisk
> > machdir-$(CONFIG_SH_LBOX_RE2) += mach-lboxre2
> > machdir-$(CONFIG_SH_CAYMAN) += mach-cayman
> > machdir-$(CONFIG_SH_RSK) += mach-rsk
> > +endif
>
> Is this actually necessary? I thought SH_DEVICE_TREE was mutually
> exclusive with board-specific configs at the Kconfig level. If not, it
> should probably be handled that way rather than with logic like this
> in the Makefile.
Hmm.
I think Kconfig level exclsive more better.
>
> > ifneq ($(machdir-y),)
> > core-y += $(addprefix arch/sh/boards/, \
> > @@ -222,6 +226,13 @@ archclean:
> > $(Q)$(MAKE) $(clean)=$(boot)
> > $(Q)$(MAKE) $(clean)=arch/sh/kernel/vsyscall
> >
> > +%.dtb %.dtb.S %.dtb.o: | scripts
> > + $(Q)$(MAKE) $(build)=arch/sh/boot/dts arch/sh/boot/dts/$@
> > +
> > +PHONY += dtbs
> > +dtbs: scripts
> > + $(Q)$(MAKE) $(build)=arch/sh/boot/dts
> > +
> > define archhelp
> > @echo ' zImage - Compressed kernel image'
> > @echo ' romImage - Compressed ROM image, if supported'
> > --
>
> More builtin-dtb stuff.
>
> Rich
--
Yoshinori Sato
<ysato@users.sourceforge.jp>
next prev parent reply other threads:[~2016-05-10 7:28 UTC|newest]
Thread overview: 59+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-05-01 5:08 [PATCH RESEND 00/12] SH: landisk convert to devicetree Yoshinori Sato
2016-05-01 5:08 ` Yoshinori Sato
2016-05-01 5:08 ` [PATCH RESEND 01/12] sh: Fix typo Yoshinori Sato
2016-05-01 5:08 ` Yoshinori Sato
2016-05-01 5:08 ` [PATCH RESEND 02/12] sh: Config update for OF mode Yoshinori Sato
2016-05-01 5:08 ` Yoshinori Sato
2016-05-01 5:08 ` [PATCH RESEND 03/12] sh: Disable board specific code in " Yoshinori Sato
2016-05-01 5:08 ` Yoshinori Sato
2016-05-04 2:49 ` Rich Felker
2016-05-04 2:49 ` Rich Felker
2016-05-10 7:28 ` Yoshinori Sato [this message]
2016-05-10 7:28 ` Yoshinori Sato
2016-05-01 5:08 ` [PATCH RESEND 04/12] sh: Drop CPU specific setup on " Yoshinori Sato
2016-05-01 5:08 ` Yoshinori Sato
2016-05-01 5:08 ` [PATCH RESEND 05/12] sh: DeviceTree support update Yoshinori Sato
2016-05-01 5:08 ` Yoshinori Sato
2016-05-04 3:10 ` Rich Felker
2016-05-04 3:10 ` Rich Felker
2016-05-04 6:41 ` Geert Uytterhoeven
2016-05-04 6:41 ` Geert Uytterhoeven
2016-05-10 8:27 ` Yoshinori Sato
2016-05-10 8:27 ` Yoshinori Sato
2016-05-10 8:25 ` Yoshinori Sato
2016-05-10 8:25 ` Yoshinori Sato
2016-05-10 16:28 ` Rich Felker
2016-05-10 16:28 ` Rich Felker
2016-05-16 7:36 ` Yoshinori Sato
2016-05-16 7:36 ` Yoshinori Sato
2016-05-01 5:08 ` [PATCH RESEND 06/12] clk: sh: SH7750/51 PLL and divider clock driver Yoshinori Sato
2016-05-01 5:08 ` Yoshinori Sato
2016-05-01 20:48 ` Geert Uytterhoeven
2016-05-01 20:48 ` Geert Uytterhoeven
2016-05-10 8:31 ` Yoshinori Sato
2016-05-10 8:31 ` Yoshinori Sato
2016-05-01 5:08 ` [PATCH RESEND 07/12] pci: sh: SH7751 PCI host bridge driver Yoshinori Sato
2016-05-01 5:08 ` Yoshinori Sato
2016-05-02 16:48 ` Bjorn Helgaas
2016-05-02 16:48 ` Bjorn Helgaas
2016-05-02 19:33 ` Bjorn Helgaas
2016-05-02 19:33 ` Bjorn Helgaas
2016-05-01 5:08 ` [PATCH RESEND 08/12] intc: sh: Renesas Super H INTC driver Yoshinori Sato
2016-05-01 5:08 ` Yoshinori Sato
2016-05-01 5:08 ` [PATCH RESEND 09/12] sh: Add I/O DATA HDL-U support drivers Yoshinori Sato
2016-05-01 5:08 ` Yoshinori Sato
2016-05-01 5:08 ` [PATCH RESEND 10/12] sh: I/O DATA HDL-U (aka landisk) support dts Yoshinori Sato
2016-05-01 5:08 ` Yoshinori Sato
[not found] ` <1462079316-27771-11-git-send-email-ysato-Rn4VEauK+AKRv+LV9MX5uooqe+aC9MnS@public.gmane.org>
2016-05-04 3:27 ` Rich Felker
2016-05-04 3:27 ` Rich Felker
2016-05-04 3:27 ` Rich Felker
2016-05-10 7:43 ` Yoshinori Sato
2016-05-10 7:43 ` Yoshinori Sato
2016-05-01 5:08 ` [PATCH RESEND 11/12] sh: I/O DATA HDL-U defconfig (DT mode) Yoshinori Sato
2016-05-01 5:08 ` Yoshinori Sato
2016-05-01 5:08 ` [PATCH RESEND 12/12] of: Add sh support Yoshinori Sato
2016-05-01 5:08 ` Yoshinori Sato
2016-05-02 12:35 ` Rob Herring
2016-05-02 12:35 ` Rob Herring
2016-05-10 7:46 ` Yoshinori Sato
2016-05-10 7:46 ` Yoshinori Sato
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87eg9ape20.wl-ysato@users.sourceforge.jp \
--to=ysato@users.sourceforge.jp \
--cc=dalias@libc.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sh@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.