[PATCH 0/2] ARM/sound: fix audio on kirkwood-openrd-client

[PATCH 0/2] ARM/sound: fix audio on kirkwood-openrd-client

[Aaro Koskinen]

Hi,

Audio playback has been broken some time on OpenRD client. With the
following patches I got the audio file playback working with mplayer.

Aaro Koskinen (2):
  ARM: DTS: kirkwood-openrd-client: fix audio
  ASoC: simple-card: don't fail if sysclk setting is not supported

 arch/arm/boot/dts/kirkwood-openrd-client.dts | 6 +++++-
 arch/arm/boot/dts/kirkwood.dtsi              | 2 +-
 sound/soc/generic/simple-card.c              | 2 +-
 3 files changed, 7 insertions(+), 3 deletions(-)

-- 
2.4.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 0/2] ARM/sound: fix audio on kirkwood-openrd-client

[Aaro Koskinen]

Hi,

Audio playback has been broken some time on OpenRD client. With the
following patches I got the audio file playback working with mplayer.

Aaro Koskinen (2):
  ARM: DTS: kirkwood-openrd-client: fix audio
  ASoC: simple-card: don't fail if sysclk setting is not supported

 arch/arm/boot/dts/kirkwood-openrd-client.dts | 6 +++++-
 arch/arm/boot/dts/kirkwood.dtsi              | 2 +-
 sound/soc/generic/simple-card.c              | 2 +-
 3 files changed, 7 insertions(+), 3 deletions(-)

-- 
2.4.0

[PATCH 1/2] ARM: DTS: kirkwood-openrd-client: fix audio

[Aaro Koskinen]

Fix audio on kirkwood-openrd-client:

1) The audio-controller was left disabled.

2) The probe fails because cs42l51 is missing #sound-dai-cells.

	/sound/simple-audio-card,codec: could not get #sound-dai-cells for /ocp@f1000000/i2c@11000/cs42l51@4a
	asoc-simple-card sound: parse error -22
	asoc-simple-card: probe of sound failed with error -22

3) The mapping is incorrect:

	asoc-simple-card sound: cs42l51-hifi <-> spdif mapping ok

   should be:

	asoc-simple-card sound: cs42l51-hifi <-> i2s mapping ok

Reported-by: Rick Thomas <rbthomas-e+AXbWqSrlAAvxtiuMwx3w@public.gmane.org>
Signed-off-by: Aaro Koskinen <aaro.koskinen-X3B1VOXEql0@public.gmane.org>
---
 arch/arm/boot/dts/kirkwood-openrd-client.dts | 6 +++++-
 arch/arm/boot/dts/kirkwood.dtsi              | 2 +-
 2 files changed, 6 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/kirkwood-openrd-client.dts b/arch/arm/boot/dts/kirkwood-openrd-client.dts
index 887b9c1..96ff59d 100644
--- a/arch/arm/boot/dts/kirkwood-openrd-client.dts
+++ b/arch/arm/boot/dts/kirkwood-openrd-client.dts
@@ -20,6 +20,9 @@
 	compatible = "marvell,openrd-client", "marvell,openrd", "marvell,kirkwood-88f6281", "marvell,kirkwood";
 
 	ocp@f1000000 {
+		audio-controller@a0000 {
+			status = "okay";
+		};
 		i2c@11000 {
 			status = "okay";
 			clock-frequency = <400000>;
@@ -27,6 +30,7 @@
 			cs42l51: cs42l51@4a {
 				compatible = "cirrus,cs42l51";
 				reg = <0x4a>;
+				#sound-dai-cells = <0>;
 			};
 		};
 	};
@@ -37,7 +41,7 @@
 		simple-audio-card,mclk-fs = <256>;
 
 		simple-audio-card,cpu {
-			sound-dai = <&audio0>;
+			sound-dai = <&audio0 0>;
 		};
 
 		simple-audio-card,codec {
diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi
index 7b5a4a1..7445a15 100644
--- a/arch/arm/boot/dts/kirkwood.dtsi
+++ b/arch/arm/boot/dts/kirkwood.dtsi
@@ -381,7 +381,7 @@
 
 		audio0: audio-controller@a0000 {
 			compatible = "marvell,kirkwood-audio";
-			#sound-dai-cells = <0>;
+			#sound-dai-cells = <1>;
 			reg = <0xa0000 0x2210>;
 			interrupts = <24>;
 			clocks = <&gate_clk 9>;
-- 
2.4.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 1/2] ARM: DTS: kirkwood-openrd-client: fix audio

[Aaro Koskinen]

Fix audio on kirkwood-openrd-client:

1) The audio-controller was left disabled.

2) The probe fails because cs42l51 is missing #sound-dai-cells.

	/sound/simple-audio-card,codec: could not get #sound-dai-cells for /ocp at f1000000/i2c at 11000/cs42l51 at 4a
	asoc-simple-card sound: parse error -22
	asoc-simple-card: probe of sound failed with error -22

3) The mapping is incorrect:

	asoc-simple-card sound: cs42l51-hifi <-> spdif mapping ok

   should be:

	asoc-simple-card sound: cs42l51-hifi <-> i2s mapping ok

Reported-by: Rick Thomas <rbthomas@pobox.com>
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
---
 arch/arm/boot/dts/kirkwood-openrd-client.dts | 6 +++++-
 arch/arm/boot/dts/kirkwood.dtsi              | 2 +-
 2 files changed, 6 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/kirkwood-openrd-client.dts b/arch/arm/boot/dts/kirkwood-openrd-client.dts
index 887b9c1..96ff59d 100644
--- a/arch/arm/boot/dts/kirkwood-openrd-client.dts
+++ b/arch/arm/boot/dts/kirkwood-openrd-client.dts
@@ -20,6 +20,9 @@
 	compatible = "marvell,openrd-client", "marvell,openrd", "marvell,kirkwood-88f6281", "marvell,kirkwood";
 
 	ocp at f1000000 {
+		audio-controller at a0000 {
+			status = "okay";
+		};
 		i2c at 11000 {
 			status = "okay";
 			clock-frequency = <400000>;
@@ -27,6 +30,7 @@
 			cs42l51: cs42l51 at 4a {
 				compatible = "cirrus,cs42l51";
 				reg = <0x4a>;
+				#sound-dai-cells = <0>;
 			};
 		};
 	};
@@ -37,7 +41,7 @@
 		simple-audio-card,mclk-fs = <256>;
 
 		simple-audio-card,cpu {
-			sound-dai = <&audio0>;
+			sound-dai = <&audio0 0>;
 		};
 
 		simple-audio-card,codec {
diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi
index 7b5a4a1..7445a15 100644
--- a/arch/arm/boot/dts/kirkwood.dtsi
+++ b/arch/arm/boot/dts/kirkwood.dtsi
@@ -381,7 +381,7 @@
 
 		audio0: audio-controller at a0000 {
 			compatible = "marvell,kirkwood-audio";
-			#sound-dai-cells = <0>;
+			#sound-dai-cells = <1>;
 			reg = <0xa0000 0x2210>;
 			interrupts = <24>;
 			clocks = <&gate_clk 9>;
-- 
2.4.0

Re: [PATCH 1/2] ARM: DTS: kirkwood-openrd-client: fix audio

[Andrew Lunn]

On Sun, Jan 24, 2016 at 12:36:39AM +0200, Aaro Koskinen wrote:
> Fix audio on kirkwood-openrd-client:
> 
> 1) The audio-controller was left disabled.
> 
> 2) The probe fails because cs42l51 is missing #sound-dai-cells.
> 
> 	/sound/simple-audio-card,codec: could not get #sound-dai-cells for /ocp@f1000000/i2c@11000/cs42l51@4a
> 	asoc-simple-card sound: parse error -22
> 	asoc-simple-card: probe of sound failed with error -22
> 
> 3) The mapping is incorrect:
> 
> 	asoc-simple-card sound: cs42l51-hifi <-> spdif mapping ok
> 
>    should be:
> 
> 	asoc-simple-card sound: cs42l51-hifi <-> i2s mapping ok
> 
> Reported-by: Rick Thomas <rbthomas-e+AXbWqSrlAAvxtiuMwx3w@public.gmane.org>
> Signed-off-by: Aaro Koskinen <aaro.koskinen-X3B1VOXEql0@public.gmane.org>

It would be good to have a Tested-by: from Rick.

Reviewed-by: Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>

	     Andrew

> ---
>  arch/arm/boot/dts/kirkwood-openrd-client.dts | 6 +++++-
>  arch/arm/boot/dts/kirkwood.dtsi              | 2 +-
>  2 files changed, 6 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/kirkwood-openrd-client.dts b/arch/arm/boot/dts/kirkwood-openrd-client.dts
> index 887b9c1..96ff59d 100644
> --- a/arch/arm/boot/dts/kirkwood-openrd-client.dts
> +++ b/arch/arm/boot/dts/kirkwood-openrd-client.dts
> @@ -20,6 +20,9 @@
>  	compatible = "marvell,openrd-client", "marvell,openrd", "marvell,kirkwood-88f6281", "marvell,kirkwood";
>  
>  	ocp@f1000000 {
> +		audio-controller@a0000 {
> +			status = "okay";
> +		};
>  		i2c@11000 {
>  			status = "okay";
>  			clock-frequency = <400000>;
> @@ -27,6 +30,7 @@
>  			cs42l51: cs42l51@4a {
>  				compatible = "cirrus,cs42l51";
>  				reg = <0x4a>;
> +				#sound-dai-cells = <0>;
>  			};
>  		};
>  	};
> @@ -37,7 +41,7 @@
>  		simple-audio-card,mclk-fs = <256>;
>  
>  		simple-audio-card,cpu {
> -			sound-dai = <&audio0>;
> +			sound-dai = <&audio0 0>;
>  		};
>  
>  		simple-audio-card,codec {
> diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi
> index 7b5a4a1..7445a15 100644
> --- a/arch/arm/boot/dts/kirkwood.dtsi
> +++ b/arch/arm/boot/dts/kirkwood.dtsi
> @@ -381,7 +381,7 @@
>  
>  		audio0: audio-controller@a0000 {
>  			compatible = "marvell,kirkwood-audio";
> -			#sound-dai-cells = <0>;
> +			#sound-dai-cells = <1>;
>  			reg = <0xa0000 0x2210>;
>  			interrupts = <24>;
>  			clocks = <&gate_clk 9>;
> -- 
> 2.4.0
> 
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 1/2] ARM: DTS: kirkwood-openrd-client: fix audio

[Andrew Lunn]

On Sun, Jan 24, 2016 at 12:36:39AM +0200, Aaro Koskinen wrote:
> Fix audio on kirkwood-openrd-client:
> 
> 1) The audio-controller was left disabled.
> 
> 2) The probe fails because cs42l51 is missing #sound-dai-cells.
> 
> 	/sound/simple-audio-card,codec: could not get #sound-dai-cells for /ocp at f1000000/i2c at 11000/cs42l51 at 4a
> 	asoc-simple-card sound: parse error -22
> 	asoc-simple-card: probe of sound failed with error -22
> 
> 3) The mapping is incorrect:
> 
> 	asoc-simple-card sound: cs42l51-hifi <-> spdif mapping ok
> 
>    should be:
> 
> 	asoc-simple-card sound: cs42l51-hifi <-> i2s mapping ok
> 
> Reported-by: Rick Thomas <rbthomas@pobox.com>
> Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>

It would be good to have a Tested-by: from Rick.

Reviewed-by: Andrew Lunn <andrew@lunn.ch>

	     Andrew

> ---
>  arch/arm/boot/dts/kirkwood-openrd-client.dts | 6 +++++-
>  arch/arm/boot/dts/kirkwood.dtsi              | 2 +-
>  2 files changed, 6 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/kirkwood-openrd-client.dts b/arch/arm/boot/dts/kirkwood-openrd-client.dts
> index 887b9c1..96ff59d 100644
> --- a/arch/arm/boot/dts/kirkwood-openrd-client.dts
> +++ b/arch/arm/boot/dts/kirkwood-openrd-client.dts
> @@ -20,6 +20,9 @@
>  	compatible = "marvell,openrd-client", "marvell,openrd", "marvell,kirkwood-88f6281", "marvell,kirkwood";
>  
>  	ocp at f1000000 {
> +		audio-controller at a0000 {
> +			status = "okay";
> +		};
>  		i2c at 11000 {
>  			status = "okay";
>  			clock-frequency = <400000>;
> @@ -27,6 +30,7 @@
>  			cs42l51: cs42l51 at 4a {
>  				compatible = "cirrus,cs42l51";
>  				reg = <0x4a>;
> +				#sound-dai-cells = <0>;
>  			};
>  		};
>  	};
> @@ -37,7 +41,7 @@
>  		simple-audio-card,mclk-fs = <256>;
>  
>  		simple-audio-card,cpu {
> -			sound-dai = <&audio0>;
> +			sound-dai = <&audio0 0>;
>  		};
>  
>  		simple-audio-card,codec {
> diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi
> index 7b5a4a1..7445a15 100644
> --- a/arch/arm/boot/dts/kirkwood.dtsi
> +++ b/arch/arm/boot/dts/kirkwood.dtsi
> @@ -381,7 +381,7 @@
>  
>  		audio0: audio-controller at a0000 {
>  			compatible = "marvell,kirkwood-audio";
> -			#sound-dai-cells = <0>;
> +			#sound-dai-cells = <1>;
>  			reg = <0xa0000 0x2210>;
>  			interrupts = <24>;
>  			clocks = <&gate_clk 9>;
> -- 
> 2.4.0
> 

Re: [PATCH 1/2] ARM: DTS: kirkwood-openrd-client: fix audio

[Rick Thomas]

On Jan 24, 2016, at 9:37 AM, Andrew Lunn <andrew@lunn.ch> wrote:

> On Sun, Jan 24, 2016 at 12:36:39AM +0200, Aaro Koskinen wrote:
>> Fix audio on kirkwood-openrd-client:
>> 
>> 1) The audio-controller was left disabled.
>> 
>> 2) The probe fails because cs42l51 is missing #sound-dai-cells.
>> 
>> 	/sound/simple-audio-card,codec: could not get #sound-dai-cells for /ocp@f1000000/i2c@11000/cs42l51@4a
>> 	asoc-simple-card sound: parse error -22
>> 	asoc-simple-card: probe of sound failed with error -22
>> 
>> 3) The mapping is incorrect:
>> 
>> 	asoc-simple-card sound: cs42l51-hifi <-> spdif mapping ok
>> 
>>   should be:
>> 
>> 	asoc-simple-card sound: cs42l51-hifi <-> i2s mapping ok
>> 
>> Reported-by: Rick Thomas <rbthomas@pobox.com>
>> Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
> 
> It would be good to have a Tested-by: from Rick.
> 
> Reviewed-by: Andrew Lunn <andrew@lunn.ch>
> 
> 	     Andrew


If someone will make a .deb I can download, I'll be happy to install it and test it.  Please be explicit in describing what and how you want tested.


Rick

[PATCH 1/2] ARM: DTS: kirkwood-openrd-client: fix audio

[Rick Thomas]

On Jan 24, 2016, at 9:37 AM, Andrew Lunn <andrew@lunn.ch> wrote:

> On Sun, Jan 24, 2016 at 12:36:39AM +0200, Aaro Koskinen wrote:
>> Fix audio on kirkwood-openrd-client:
>> 
>> 1) The audio-controller was left disabled.
>> 
>> 2) The probe fails because cs42l51 is missing #sound-dai-cells.
>> 
>> 	/sound/simple-audio-card,codec: could not get #sound-dai-cells for /ocp at f1000000/i2c at 11000/cs42l51 at 4a
>> 	asoc-simple-card sound: parse error -22
>> 	asoc-simple-card: probe of sound failed with error -22
>> 
>> 3) The mapping is incorrect:
>> 
>> 	asoc-simple-card sound: cs42l51-hifi <-> spdif mapping ok
>> 
>>   should be:
>> 
>> 	asoc-simple-card sound: cs42l51-hifi <-> i2s mapping ok
>> 
>> Reported-by: Rick Thomas <rbthomas@pobox.com>
>> Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
> 
> It would be good to have a Tested-by: from Rick.
> 
> Reviewed-by: Andrew Lunn <andrew@lunn.ch>
> 
> 	     Andrew


If someone will make a .deb I can download, I'll be happy to install it and test it.  Please be explicit in describing what and how you want tested.


Rick

Re: [PATCH 1/2] ARM: DTS: kirkwood-openrd-client: fix audio

[Martin Michlmayr]

* Rick Thomas <rbthomas-e+AXbWqSrlAAvxtiuMwx3w@public.gmane.org> [2016-01-24 12:56]:
> > It would be good to have a Tested-by: from Rick.
> > 
> If someone will make a .deb I can download, I'll be happy to install
> it and test it.  Please be explicit in describing what and how you
> want tested.

Check your email. :)

-- 
Martin Michlmayr
http://www.cyrius.com/
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 1/2] ARM: DTS: kirkwood-openrd-client: fix audio

[Martin Michlmayr]

* Rick Thomas <rbthomas@pobox.com> [2016-01-24 12:56]:
> > It would be good to have a Tested-by: from Rick.
> > 
> If someone will make a .deb I can download, I'll be happy to install
> it and test it.  Please be explicit in describing what and how you
> want tested.

Check your email. :)

-- 
Martin Michlmayr
http://www.cyrius.com/

Re: [PATCH 1/2] ARM: DTS: kirkwood-openrd-client: fix audio

[Rick Thomas]

On Jan 24, 2016, at 1:40 PM, Martin Michlmayr <tbm-R+vWnYXSFMfQT0dZR+AlfA@public.gmane.org> wrote:

> * Rick Thomas <rbthomas-e+AXbWqSrlAAvxtiuMwx3w@public.gmane.org> [2016-01-24 12:56]:
>>> It would be good to have a Tested-by: from Rick.
>>> 
>> If someone will make a .deb I can download, I'll be happy to install
>> it and test it.  Please be explicit in describing what and how you
>> want tested.
> 
> Check your email. :)
> 
> -- 
> Martin Michlmayr
> http://www.cyrius.com/
> 


Got it.

Looks like mmc works with that kernel.  I was able to mount /dev/mmcblk0p1 and read files from it.

Sound we have some progress:

> root@base:~# ls -l /dev/snd
> total 0
> drwxr-xr-x 2 root root       60 Jan 24 18:23 by-path
> crw-rw---- 1 root audio 116,  2 Jan 24 18:23 controlC0
> crw-rw---- 1 root audio 116,  4 Jan 24 18:23 pcmC0D0c
> crw-rw---- 1 root audio 116,  3 Jan 24 18:23 pcmC0D0p
> crw-rw---- 1 root audio 116,  1 Jan 24 18:23 seq
> crw-rw---- 1 root audio 116, 33 Jan 24 18:23 timer
> root@base:~# cat /proc/asound/devices 
>   2: [ 0]   : control
>   3: [ 0- 0]: digital audio playback
>   4: [ 0- 0]: digital audio capture
>  33:        : timer
> root@base:~# cat /proc/asound/cards   
>  0 [i2scs42l51hifi ]: i2s-cs42l51-hif - i2s-cs42l51-hifi
>                       i2s-cs42l51-hifi

Full of hope, I did "aptitude install mp321" which went without any visible problems.

Then hooked up a pair of earphones to the "speaker" plug on the Client and ran

> root@base:~# mpg321 -v /tmp/Jersey.mp3 
> High Performance MPEG 1.0/2.0/2.5 Audio Player for Layer 1, 2, and 3.
> Version 0.3.2-1 (2012/03/25). Written and copyrights by Joe Drew,
> now maintained by Nanakos Chrysostomos and others.
> Uses code from various people. See 'README' for more!
> THIS SOFTWARE COMES WITH ABSOLUTELY NO WARRANTY! USE AT YOUR OWN RISK!
> Title	: The Jersey Bounce              Artist : Zazuzaz                       
> Album	: An Evening with ZaZuZaz        Year	 : 2000
> Comment : Amazon.com Song ID: 201809221  Genre : Jazz                          
> 
> Directory: /tmp
> Playing MPEG stream from Jersey.mp3 ...
> MPEG 1.0, Layer: III, Freq: 44100, mode: Joint-Stereo, modext: 0, BPF : 2560
> Channels: 2, copyright: No, original: Yes, CRC: No, emphasis: 0.
> Bitrate: 128 Kbits/s, Extension value: 0
> Audio: 1:1 conversion, rate: 44100, encoding: signed 16 bit, channels: 2
> ALSA lib pcm.c:2267:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.front
> ^C                                                                            
> [0:20] Decoding of Jersey.mp3 finished.

So it seemed to be running OK...  But there was no sound in the earphones.  I also tried adding option "-g 50" to set the gain explicitly.  Still no sound.

Is there a hardware jumper I need to set to activate sound on the OpenRD Client board?

Do I need to install another package? For example, "aptitude search '~i alsa'" gives no output, indicating, I believe, that there are no installed packages with "alsa" in their name.

The message:
> ALSA lib pcm.c:2267:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.front
seems suspicious.

Any thoughts?
Rick


--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 1/2] ARM: DTS: kirkwood-openrd-client: fix audio

[Rick Thomas]

On Jan 24, 2016, at 1:40 PM, Martin Michlmayr <tbm@cyrius.com> wrote:

> * Rick Thomas <rbthomas@pobox.com> [2016-01-24 12:56]:
>>> It would be good to have a Tested-by: from Rick.
>>> 
>> If someone will make a .deb I can download, I'll be happy to install
>> it and test it.  Please be explicit in describing what and how you
>> want tested.
> 
> Check your email. :)
> 
> -- 
> Martin Michlmayr
> http://www.cyrius.com/
> 


Got it.

Looks like mmc works with that kernel.  I was able to mount /dev/mmcblk0p1 and read files from it.

Sound we have some progress:

> root at base:~# ls -l /dev/snd
> total 0
> drwxr-xr-x 2 root root       60 Jan 24 18:23 by-path
> crw-rw---- 1 root audio 116,  2 Jan 24 18:23 controlC0
> crw-rw---- 1 root audio 116,  4 Jan 24 18:23 pcmC0D0c
> crw-rw---- 1 root audio 116,  3 Jan 24 18:23 pcmC0D0p
> crw-rw---- 1 root audio 116,  1 Jan 24 18:23 seq
> crw-rw---- 1 root audio 116, 33 Jan 24 18:23 timer
> root at base:~# cat /proc/asound/devices 
>   2: [ 0]   : control
>   3: [ 0- 0]: digital audio playback
>   4: [ 0- 0]: digital audio capture
>  33:        : timer
> root at base:~# cat /proc/asound/cards   
>  0 [i2scs42l51hifi ]: i2s-cs42l51-hif - i2s-cs42l51-hifi
>                       i2s-cs42l51-hifi

Full of hope, I did "aptitude install mp321" which went without any visible problems.

Then hooked up a pair of earphones to the "speaker" plug on the Client and ran

> root at base:~# mpg321 -v /tmp/Jersey.mp3 
> High Performance MPEG 1.0/2.0/2.5 Audio Player for Layer 1, 2, and 3.
> Version 0.3.2-1 (2012/03/25). Written and copyrights by Joe Drew,
> now maintained by Nanakos Chrysostomos and others.
> Uses code from various people. See 'README' for more!
> THIS SOFTWARE COMES WITH ABSOLUTELY NO WARRANTY! USE AT YOUR OWN RISK!
> Title	: The Jersey Bounce              Artist : Zazuzaz                       
> Album	: An Evening with ZaZuZaz        Year	 : 2000
> Comment : Amazon.com Song ID: 201809221  Genre : Jazz                          
> 
> Directory: /tmp
> Playing MPEG stream from Jersey.mp3 ...
> MPEG 1.0, Layer: III, Freq: 44100, mode: Joint-Stereo, modext: 0, BPF : 2560
> Channels: 2, copyright: No, original: Yes, CRC: No, emphasis: 0.
> Bitrate: 128 Kbits/s, Extension value: 0
> Audio: 1:1 conversion, rate: 44100, encoding: signed 16 bit, channels: 2
> ALSA lib pcm.c:2267:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.front
> ^C                                                                            
> [0:20] Decoding of Jersey.mp3 finished.

So it seemed to be running OK...  But there was no sound in the earphones.  I also tried adding option "-g 50" to set the gain explicitly.  Still no sound.

Is there a hardware jumper I need to set to activate sound on the OpenRD Client board?

Do I need to install another package? For example, "aptitude search '~i alsa'" gives no output, indicating, I believe, that there are no installed packages with "alsa" in their name.

The message:
> ALSA lib pcm.c:2267:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.front
seems suspicious.

Any thoughts?
Rick

Re: [PATCH 1/2] ARM: DTS: kirkwood-openrd-client: fix audio

[Aaro Koskinen]

Hi,

On Sun, Jan 24, 2016 at 07:26:43PM -0800, Rick Thomas wrote:
> > root@base:~# cat /proc/asound/devices 
> >   2: [ 0]   : control
> >   3: [ 0- 0]: digital audio playback
> >   4: [ 0- 0]: digital audio capture
> >  33:        : timer
> > root@base:~# cat /proc/asound/cards   
> >  0 [i2scs42l51hifi ]: i2s-cs42l51-hif - i2s-cs42l51-hifi
> >                       i2s-cs42l51-hifi
> 
> Full of hope, I did "aptitude install mp321" which went without any visible problems.
> 
> Then hooked up a pair of earphones to the "speaker" plug on the Client and ran
> 
> > root@base:~# mpg321 -v /tmp/Jersey.mp3 
> > High Performance MPEG 1.0/2.0/2.5 Audio Player for Layer 1, 2, and 3.
> > Version 0.3.2-1 (2012/03/25). Written and copyrights by Joe Drew,
> > now maintained by Nanakos Chrysostomos and others.
> > Uses code from various people. See 'README' for more!
> > THIS SOFTWARE COMES WITH ABSOLUTELY NO WARRANTY! USE AT YOUR OWN RISK!
> > Title	: The Jersey Bounce              Artist : Zazuzaz                       
> > Album	: An Evening with ZaZuZaz        Year	 : 2000
> > Comment : Amazon.com Song ID: 201809221  Genre : Jazz                          
> > 
> > Directory: /tmp
> > Playing MPEG stream from Jersey.mp3 ...
> > MPEG 1.0, Layer: III, Freq: 44100, mode: Joint-Stereo, modext: 0, BPF : 2560
> > Channels: 2, copyright: No, original: Yes, CRC: No, emphasis: 0.
> > Bitrate: 128 Kbits/s, Extension value: 0
> > Audio: 1:1 conversion, rate: 44100, encoding: signed 16 bit, channels: 2
> > ALSA lib pcm.c:2267:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.front
> > ^C                                                                            
> > [0:20] Decoding of Jersey.mp3 finished.
> 
> So it seemed to be running OK...  But there was no sound in the
> earphones. I also tried adding option "-g 50" to set the gain explicitly.
> Still no sound.
> 
> Is there a hardware jumper I need to set to activate sound on the
> OpenRD Client board?

On my board I need to say "amixer set PCM on". Can you post the full
output from "amixer" without any parameters?

Also check if you have this line in dmesg:

	asoc-simple-card sound: cs42l51-hifi <-> i2s mapping ok

If it says "spdif" the player runs but is silent.

A.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 1/2] ARM: DTS: kirkwood-openrd-client: fix audio

[Aaro Koskinen]

Hi,

On Sun, Jan 24, 2016 at 07:26:43PM -0800, Rick Thomas wrote:
> > root at base:~# cat /proc/asound/devices 
> >   2: [ 0]   : control
> >   3: [ 0- 0]: digital audio playback
> >   4: [ 0- 0]: digital audio capture
> >  33:        : timer
> > root at base:~# cat /proc/asound/cards   
> >  0 [i2scs42l51hifi ]: i2s-cs42l51-hif - i2s-cs42l51-hifi
> >                       i2s-cs42l51-hifi
> 
> Full of hope, I did "aptitude install mp321" which went without any visible problems.
> 
> Then hooked up a pair of earphones to the "speaker" plug on the Client and ran
> 
> > root at base:~# mpg321 -v /tmp/Jersey.mp3 
> > High Performance MPEG 1.0/2.0/2.5 Audio Player for Layer 1, 2, and 3.
> > Version 0.3.2-1 (2012/03/25). Written and copyrights by Joe Drew,
> > now maintained by Nanakos Chrysostomos and others.
> > Uses code from various people. See 'README' for more!
> > THIS SOFTWARE COMES WITH ABSOLUTELY NO WARRANTY! USE AT YOUR OWN RISK!
> > Title	: The Jersey Bounce              Artist : Zazuzaz                       
> > Album	: An Evening with ZaZuZaz        Year	 : 2000
> > Comment : Amazon.com Song ID: 201809221  Genre : Jazz                          
> > 
> > Directory: /tmp
> > Playing MPEG stream from Jersey.mp3 ...
> > MPEG 1.0, Layer: III, Freq: 44100, mode: Joint-Stereo, modext: 0, BPF : 2560
> > Channels: 2, copyright: No, original: Yes, CRC: No, emphasis: 0.
> > Bitrate: 128 Kbits/s, Extension value: 0
> > Audio: 1:1 conversion, rate: 44100, encoding: signed 16 bit, channels: 2
> > ALSA lib pcm.c:2267:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.front
> > ^C                                                                            
> > [0:20] Decoding of Jersey.mp3 finished.
> 
> So it seemed to be running OK...  But there was no sound in the
> earphones. I also tried adding option "-g 50" to set the gain explicitly.
> Still no sound.
> 
> Is there a hardware jumper I need to set to activate sound on the
> OpenRD Client board?

On my board I need to say "amixer set PCM on". Can you post the full
output from "amixer" without any parameters?

Also check if you have this line in dmesg:

	asoc-simple-card sound: cs42l51-hifi <-> i2s mapping ok

If it says "spdif" the player runs but is silent.

A.

Re: [PATCH 1/2] ARM: DTS: kirkwood-openrd-client: fix audio

[Rick Thomas]

On Jan 25, 2016, at 10:24 AM, Aaro Koskinen <aaro.koskinen-X3B1VOXEql0@public.gmane.org> wrote:

> Hi,
> 
> On Sun, Jan 24, 2016 at 07:26:43PM -0800, Rick Thomas wrote:
>>> root@base:~# cat /proc/asound/devices 
>>>  2: [ 0]   : control
>>>  3: [ 0- 0]: digital audio playback
>>>  4: [ 0- 0]: digital audio capture
>>> 33:        : timer
>>> root@base:~# cat /proc/asound/cards   
>>> 0 [i2scs42l51hifi ]: i2s-cs42l51-hif - i2s-cs42l51-hifi
>>>                      i2s-cs42l51-hifi
>> 
>> Full of hope, I did "aptitude install mp321" which went without any visible problems.
>> 
>> Then hooked up a pair of earphones to the "speaker" plug on the Client and ran
>> 
>>> root@base:~# mpg321 -v /tmp/Jersey.mp3 
>>> High Performance MPEG 1.0/2.0/2.5 Audio Player for Layer 1, 2, and 3.
>>> Version 0.3.2-1 (2012/03/25). Written and copyrights by Joe Drew,
>>> now maintained by Nanakos Chrysostomos and others.
>>> Uses code from various people. See 'README' for more!
>>> THIS SOFTWARE COMES WITH ABSOLUTELY NO WARRANTY! USE AT YOUR OWN RISK!
>>> Title	: The Jersey Bounce              Artist : Zazuzaz                       
>>> Album	: An Evening with ZaZuZaz        Year	 : 2000
>>> Comment : Amazon.com Song ID: 201809221  Genre : Jazz                          
>>> 
>>> Directory: /tmp
>>> Playing MPEG stream from Jersey.mp3 ...
>>> MPEG 1.0, Layer: III, Freq: 44100, mode: Joint-Stereo, modext: 0, BPF : 2560
>>> Channels: 2, copyright: No, original: Yes, CRC: No, emphasis: 0.
>>> Bitrate: 128 Kbits/s, Extension value: 0
>>> Audio: 1:1 conversion, rate: 44100, encoding: signed 16 bit, channels: 2
>>> ALSA lib pcm.c:2267:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.front
>>> ^C                                                                            
>>> [0:20] Decoding of Jersey.mp3 finished.
>> 
>> So it seemed to be running OK...  But there was no sound in the
>> earphones. I also tried adding option "-g 50" to set the gain explicitly.
>> Still no sound.
>> 
>> Is there a hardware jumper I need to set to activate sound on the
>> OpenRD Client board?
> 
> On my board I need to say "amixer set PCM on". Can you post the full
> output from "amixer" without any parameters?
> 
> Also check if you have this line in dmesg:
> 
> 	asoc-simple-card sound: cs42l51-hifi <-> i2s mapping ok
> 
> If it says "spdif" the player runs but is silent.
> 
> A.

Martin suggested that I install alsa-utils and run alsamixer in order to remove any extraneous "mute" setting.  I did that (I didn't realize alsamixer was runnable from the command line -- good to know!)

I did that and it worked!  "The Jersey Bounce" never sounded so good!

I'll do the tests that Aaro suggest, just for completeness, but it will have to wait til later tonight.

So we can add -- 

Tested-by: Rick Thomas <rbthomas-e+AXbWqSrlAAvxtiuMwx3w@public.gmane.org>

Enjoy!
Rick


--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 1/2] ARM: DTS: kirkwood-openrd-client: fix audio

[Rick Thomas]

On Jan 25, 2016, at 10:24 AM, Aaro Koskinen <aaro.koskinen@iki.fi> wrote:

> Hi,
> 
> On Sun, Jan 24, 2016 at 07:26:43PM -0800, Rick Thomas wrote:
>>> root at base:~# cat /proc/asound/devices 
>>>  2: [ 0]   : control
>>>  3: [ 0- 0]: digital audio playback
>>>  4: [ 0- 0]: digital audio capture
>>> 33:        : timer
>>> root at base:~# cat /proc/asound/cards   
>>> 0 [i2scs42l51hifi ]: i2s-cs42l51-hif - i2s-cs42l51-hifi
>>>                      i2s-cs42l51-hifi
>> 
>> Full of hope, I did "aptitude install mp321" which went without any visible problems.
>> 
>> Then hooked up a pair of earphones to the "speaker" plug on the Client and ran
>> 
>>> root at base:~# mpg321 -v /tmp/Jersey.mp3 
>>> High Performance MPEG 1.0/2.0/2.5 Audio Player for Layer 1, 2, and 3.
>>> Version 0.3.2-1 (2012/03/25). Written and copyrights by Joe Drew,
>>> now maintained by Nanakos Chrysostomos and others.
>>> Uses code from various people. See 'README' for more!
>>> THIS SOFTWARE COMES WITH ABSOLUTELY NO WARRANTY! USE AT YOUR OWN RISK!
>>> Title	: The Jersey Bounce              Artist : Zazuzaz                       
>>> Album	: An Evening with ZaZuZaz        Year	 : 2000
>>> Comment : Amazon.com Song ID: 201809221  Genre : Jazz                          
>>> 
>>> Directory: /tmp
>>> Playing MPEG stream from Jersey.mp3 ...
>>> MPEG 1.0, Layer: III, Freq: 44100, mode: Joint-Stereo, modext: 0, BPF : 2560
>>> Channels: 2, copyright: No, original: Yes, CRC: No, emphasis: 0.
>>> Bitrate: 128 Kbits/s, Extension value: 0
>>> Audio: 1:1 conversion, rate: 44100, encoding: signed 16 bit, channels: 2
>>> ALSA lib pcm.c:2267:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.front
>>> ^C                                                                            
>>> [0:20] Decoding of Jersey.mp3 finished.
>> 
>> So it seemed to be running OK...  But there was no sound in the
>> earphones. I also tried adding option "-g 50" to set the gain explicitly.
>> Still no sound.
>> 
>> Is there a hardware jumper I need to set to activate sound on the
>> OpenRD Client board?
> 
> On my board I need to say "amixer set PCM on". Can you post the full
> output from "amixer" without any parameters?
> 
> Also check if you have this line in dmesg:
> 
> 	asoc-simple-card sound: cs42l51-hifi <-> i2s mapping ok
> 
> If it says "spdif" the player runs but is silent.
> 
> A.

Martin suggested that I install alsa-utils and run alsamixer in order to remove any extraneous "mute" setting.  I did that (I didn't realize alsamixer was runnable from the command line -- good to know!)

I did that and it worked!  "The Jersey Bounce" never sounded so good!

I'll do the tests that Aaro suggest, just for completeness, but it will have to wait til later tonight.

So we can add -- 

Tested-by: Rick Thomas <rbthomas@pobox.com>

Enjoy!
Rick

Re: [PATCH 1/2] ARM: DTS: kirkwood-openrd-client: fix audio

[Rick Thomas]

[-- Attachment #1: Type: text/plain, Size: 427 bytes --]


On Jan 25, 2016, at 10:24 AM, Aaro Koskinen <aaro.koskinen-X3B1VOXEql0@public.gmane.org> wrote:

> 
> On my board I need to say "amixer set PCM on". Can you post the full
> output from "amixer" without any parameters?
> 
> Also check if you have this line in dmesg:
> 
> 	asoc-simple-card sound: cs42l51-hifi <-> i2s mapping ok
> 
> If it says "spdif" the player runs but is silent.
> 
> A.
> 

Here's the output of "amixer"


[-- Attachment #2: amixer.out --]
[-- Type: application/octet-stream, Size: 2059 bytes --]

Simple mixer control 'Bass',0
  Capabilities: volume volume-joined
  Playback channels: Mono
  Capture channels: Mono
  Limits: 0 - 15
  Mono: 7 [47%] [0.00dB]
Simple mixer control 'Treble',0
  Capabilities: volume volume-joined
  Playback channels: Mono
  Capture channels: Mono
  Limits: 0 - 15
  Mono: 7 [47%] [0.00dB]
Simple mixer control 'PCM',0
  Capabilities: pvolume pswitch
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 127
  Mono:
  Front Left: Playback 103 [81%] [0.00dB] [on]
  Front Right: Playback 103 [81%] [0.00dB] [on]
Simple mixer control 'PCM channel mixer',0
  Capabilities: enum
  Items: 'L R' 'L+R' 'R L'
  Item0: 'L R'
Simple mixer control 'Mic Boost',0
  Capabilities: volume
  Playback channels: Front Left - Front Right
  Capture channels: Front Left - Front Right
  Limits: 0 - 1
  Front Left: 0 [0%] [16.00dB]
  Front Right: 0 [0%] [16.00dB]
Simple mixer control 'Playback Deemphasis',0
  Capabilities: pswitch pswitch-joined
  Playback channels: Mono
  Mono: Playback [on]
Simple mixer control 'ADC Mixer',0
  Capabilities: volume pswitch
  Playback channels: Front Left - Front Right
  Capture channels: Front Left - Front Right
  Limits: 0 - 127
  Front Left: 103 [81%] [0.00dB] Playback [on]
  Front Right: 103 [81%] [0.00dB] Playback [on]
Simple mixer control 'Analog',0
  Capabilities: pvolume
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 228
  Mono:
  Front Left: Playback 204 [89%] [0.00dB]
  Front Right: Playback 204 [89%] [0.00dB]
Simple mixer control 'Auto-Mute',0
  Capabilities: pswitch pswitch-joined
  Playback channels: Mono
  Mono: Playback [on]
Simple mixer control 'PGA-ADC Mux Left',0
  Capabilities: enum
  Items: 'AIN1 Left' 'AIN2 Left' 'MIC Left' 'MIC+preamp Left'
  Item0: 'AIN1 Left'
Simple mixer control 'PGA-ADC Mux Right',0
  Capabilities: enum
  Items: 'AIN1 Right' 'AIN2 Right' 'MIC Right' 'MIC+preamp Right'
  Item0: 'AIN1 Right'
Simple mixer control 'Soft Ramp',0
  Capabilities: pswitch pswitch-joined
  Playback channels: Mono
  Mono: Playback [on]

[-- Attachment #3: Type: text/plain, Size: 145 bytes --]



This is after having run alsamixer (per Martin's suggestion) and un-mute-ing everything I could find.

And here's the output of "dmesg"


[-- Attachment #4: dmesg.out --]
[-- Type: application/octet-stream, Size: 18761 bytes --]

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.3.0-1-kirkwood (debian-kernel-0aAXYlwwYIJuHlm7Suoebg@public.gmane.org) (gcc version 4.9.3 (Debian 4.9.3-10) ) #1 Debian 4.3.3-7test1 (2016-01-19)
[    0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=0005317f
[    0.000000] CPU: VIVT data cache, VIVT instruction cache
[    0.000000] Machine model: OpenRD Client
[    0.000000] Memory policy: Data cache writeback
[    0.000000] On node 0 totalpages: 131072
[    0.000000] free_area_init_node: node 0, pgdat c0590e4c, node_mem_map dfbf8000
[    0.000000]   Normal zone: 1024 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 131072 pages, LIFO batch:31
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 130048
[    0.000000] Kernel command line: console=ttyS0,115200
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 502084K/524288K available (3724K kernel code, 328K rwdata, 1384K rodata, 264K init, 292K bss, 22204K reserved, 0K cma-reserved, 0K highmem)
[    0.000000] Virtual kernel memory layout:
                   vector  : 0xffff0000 - 0xffff1000   (   4 kB)
                   fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
                   vmalloc : 0xe0800000 - 0xff000000   ( 488 MB)
                   lowmem  : 0xc0000000 - 0xe0000000   ( 512 MB)
                   pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
                   modules : 0xbf000000 - 0xbfe00000   (  14 MB)
                     .text : 0xc0008000 - 0xc05053d4   (5109 kB)
                     .init : 0xc0506000 - 0xc0548000   ( 264 kB)
                     .data : 0xc0548000 - 0xc059a200   ( 329 kB)
                      .bss : 0xc059a200 - 0xc05e326c   ( 293 kB)
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] clocksource: orion_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302233 ns
[    0.000009] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 10737418237ns
[    0.000304] Console: colour dummy device 80x30
[    0.000331] Calibrating delay loop... 1191.93 BogoMIPS (lpj=2383872)
[    0.020059] pid_max: default: 32768 minimum: 301
[    0.020170] Security Framework initialized
[    0.020185] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.020274] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.020293] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.021084] Initializing cgroup subsys io
[    0.021129] Initializing cgroup subsys devices
[    0.021153] Initializing cgroup subsys freezer
[    0.021173] Initializing cgroup subsys net_cls
[    0.021201] Initializing cgroup subsys perf_event
[    0.021225] Initializing cgroup subsys net_prio
[    0.021293] CPU: Testing write buffer coherency: ok
[    0.021389] ftrace: allocating 15958 entries in 32 pages
[    0.046027] Setting up static identity map for 0x8200 - 0x823c
[    0.046297] mvebu-soc-id: MVEBU SoC ID=0x6281, Rev=0x2
[    0.048663] devtmpfs: initialized
[    0.053106] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.053526] pinctrl core: initialized pinctrl subsystem
[    0.054794] NET: Registered protocol family 16
[    0.055154] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.056246] cpuidle: using governor ladder
[    0.056272] cpuidle: using governor menu
[    0.056579] Feroceon L2: Enabling L2
[    0.056620] Feroceon L2: Cache support initialised.
[    0.056882] [Firmware Info]: /ocp@f1000000/ethernet-controller@72000/ethernet0-port@0: local-mac-address is not set
[    0.056977] [Firmware Info]: /ocp@f1000000/ethernet-controller@76000/ethernet1-port@0: local-mac-address is not set
[    0.060812] No ATAGs?
[    0.065733] clocksource: Switched to clocksource orion_clocksource
[    0.086769] NET: Registered protocol family 2
[    0.087515] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[    0.087575] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
[    0.087625] TCP: Hash tables configured (established 4096 bind 4096)
[    0.087691] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.087725] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.087927] NET: Registered protocol family 1
[    0.087978] PCI: CLS 0 bytes, default 32
[    0.088215] Unpacking initramfs...
[    1.106205] Freeing initrd memory: 11580K (c1100000 - c1c4f000)
[    1.107033] futex hash table entries: 256 (order: -1, 3072 bytes)
[    1.107097] audit: initializing netlink subsys (disabled)
[    1.107165] audit: type=2000 audit(1.100:1): initialized
[    1.107755] zbud: loaded
[    1.107986] VFS: Disk quotas dquot_6.6.0
[    1.108044] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.108152] jffs2: version 2.2. (NAND) (SUMMARY)  \xffffffc2\xffffffa9 2001-2006 Red Hat, Inc.
[    1.110079] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    1.110246] io scheduler noop registered
[    1.110298] io scheduler cfq registered (default)
[    1.111556] kirkwood-pinctrl f1010000.pin-controller: registered pinctrl driver
[    1.111880] GPIO line 28 (SelRS232or485) hogged as output/low
[    1.112190] irq: Cannot allocate irq_descs @ IRQ36, assuming pre-allocated
[    1.112330] GPIO line 34 (SelUARTorSD) hogged as output/high
[    1.112571] irq: Cannot allocate irq_descs @ IRQ68, assuming pre-allocated
[    1.113334] mvebu-pcie mbus:pcie-controller: PCI host bridge to bus 0000:00
[    1.113353] pci_bus 0000:00: root bus resource [io  0x1000-0xfffff]
[    1.113366] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff]
[    1.113379] pci_bus 0000:00: root bus resource [bus 00-ff]
[    1.113409] pci 0000:00:01.0: [11ab:6281] type 01 class 0x060400
[    1.113641] PCI: bus0: Fast back to back transfers disabled
[    1.113656] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[    1.113874] pci 0000:01:00.0: [18ca:0027] type 00 class 0x030000
[    1.113921] pci 0000:01:00.0: reg 0x10: [mem 0x40000000-0x43ffffff pref]
[    1.113943] pci 0000:01:00.0: reg 0x14: [mem 0x44000000-0x4403ffff]
[    1.113963] pci 0000:01:00.0: reg 0x18: [io  0xf0000000-0xf000007f]
[    1.114007] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[    1.114053] pci 0000:01:00.0: supports D1 D2
[    1.114264] PCI: bus1: Fast back to back transfers disabled
[    1.114280] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[    1.114321] pci 0000:00:01.0: BAR 8: assigned [mem 0xe0000000-0xe5ffffff]
[    1.114336] pci 0000:00:01.0: BAR 7: assigned [io  0x10000-0x10fff]
[    1.114355] pci 0000:01:00.0: BAR 0: assigned [mem 0xe0000000-0xe3ffffff pref]
[    1.114373] pci 0000:01:00.0: BAR 1: assigned [mem 0xe4000000-0xe403ffff]
[    1.114391] pci 0000:01:00.0: BAR 6: assigned [mem 0xe4040000-0xe404ffff pref]
[    1.114405] pci 0000:01:00.0: BAR 2: assigned [io  0x10000-0x1007f]
[    1.114420] pci 0000:00:01.0: PCI bridge to [bus 01]
[    1.114432] pci 0000:00:01.0:   bridge window [io  0x10000-0x10fff]
[    1.114446] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xe5ffffff]
[    1.114755] mv_xor f1060800.xor: Marvell shared XOR driver
[    1.134966] mv_xor f1060800.xor: Marvell XOR (Registers Mode): ( xor cpy intr )
[    1.135149] mv_xor f1060900.xor: Marvell shared XOR driver
[    1.154958] mv_xor f1060900.xor: Marvell XOR (Registers Mode): ( xor cpy intr )
[    1.155358] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[    1.156457] console [ttyS0] disabled
[    1.156511] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 27, base_baud = 12500000) is a 16550A
[    1.788094] console [ttyS0] enabled
[    1.792926] nand: device found, Manufacturer ID: 0xec, Chip ID: 0xdc
[    1.799339] nand: Samsung NAND 512MiB 3,3V 8-bit
[    1.803993] nand: 512 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[    1.811629] Scanning device for bad blocks
[    2.020537] Bad eraseblock 2700 at 0x000015180000
[    2.043069] Bad eraseblock 2935 at 0x000016ee0000
[    2.128380] Bad eraseblock 3998 at 0x00001f3c0000
[    2.133155] Bad eraseblock 3999 at 0x00001f3e0000
[    2.145183] 3 ofpart partitions found on MTD device orion_nand
[    2.151056] Creating 3 MTD partitions on "orion_nand":
[    2.156230] 0x000000000000-0x000000100000 : "u-boot"
[    2.162365] 0x000000100000-0x000000500000 : "uImage"
[    2.168343] 0x000000600000-0x000020000000 : "root"
[    2.175693] mousedev: PS/2 mouse device common for all mice
[    2.181818] rtc-mv f1010300.rtc: rtc core: registered f1010300.rtc as rtc0
[    2.188861] i2c /dev entries driver
[    2.193982] ledtrig-cpu: registered to indicate activity on CPUs
[    2.200436] NET: Registered protocol family 17
[    2.205538] registered taskstats version 1
[    2.209785] zswap: loaded using pool lzo/zbud
[    2.214709] rtc-mv f1010300.rtc: setting system clock to 2016-01-26 03:18:28 UTC (1453778308)
[    2.225271] Freeing unused kernel memory: 264K (c0506000 - c0548000)
[    2.304659] random: systemd-udevd urandom read with 7 bits of entropy available
[    2.536671] usbcore: registered new interface driver usbfs
[    2.557199] libphy: orion_mdio_bus: probed
[    2.585941] usbcore: registered new interface driver hub
[    2.613951] usbcore: registered new device driver usb
[    2.629075] SCSI subsystem initialized
[    2.648192] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.658109] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4
[    2.679036] mvsdio f1090000.mvsdio: Got CD GPIO
[    2.699275] ehci-orion: EHCI orion driver
[    2.705354] libata version 3.00 loaded.
[    2.733252] sata_mv f1080000.sata: version 1.28
[    2.733506] sata_mv f1080000.sata: slots 32 ports 2
[    2.762343] scsi host0: sata_mv
[    2.777145] scsi host1: sata_mv
[    2.780644] ata1: SATA max UDMA/133 irq 34
[    2.784800] ata2: SATA max UDMA/133 irq 34
[    2.788947] mmc0: host does not support reading read-only switch, assuming write-enable
[    3.311293] mmc0: new high speed SDHC card at address 8fe4
[    3.322275] orion-ehci f1050000.ehci: EHCI Host Controller
[    3.335292] orion-ehci f1050000.ehci: new USB bus registered, assigned bus number 1
[    3.360647] orion-ehci f1050000.ehci: irq 30, io mem 0xf1050000
[    3.389791] orion-ehci f1050000.ehci: USB 2.0 started, EHCI 1.00
[    3.406250] ata1: SATA link down (SStatus 0 SControl F300)
[    3.413134] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    3.419993] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.427269] usb usb1: Product: EHCI Host Controller
[    3.432184] usb usb1: Manufacturer: Linux 4.3.0-1-kirkwood ehci_hcd
[    3.438499] usb usb1: SerialNumber: f1050000.ehci
[    3.509564] hub 1-0:1.0: USB hub found
[    3.521684] hub 1-0:1.0: 1 port detected
[    3.532274] mmcblk0: mmc0:8fe4 SD16G 14.8 GiB 
[    3.546417]  mmcblk0: p1
[    4.057438] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address 00:50:43:01:a2:7e
[    5.128339] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl F300)
[    5.142063] mv643xx_eth_port mv643xx_eth_port.1 eth1: port 0 with MAC address 00:50:43:01:a2:7f
[    5.150892] ata2.00: ATA-8: HGST HTS721010A9E630, JB0OA3J0, max UDMA/133
[    5.157642] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    5.189774] usb 1-1: new high-speed USB device number 2 using orion-ehci
[    5.196878] ata2.00: configured for UDMA/133
[    5.201901] scsi 1:0:0:0: Direct-Access     ATA      HGST HTS721010A9 A3J0 PQ: 0 ANSI: 5
[    5.239148] sd 1:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[    5.246931] sd 1:0:0:0: [sda] 4096-byte physical blocks
[    5.253931] sd 1:0:0:0: [sda] Write Protect is off
[    5.258823] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    5.261356] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.312930]  sda: sda1 sda2 sda3 sda4 < sda5 >
[    5.323587] sd 1:0:0:0: [sda] Attached SCSI disk
[    5.350289] usb 1-1: New USB device found, idVendor=0424, idProduct=2517
[    5.357064] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    5.373548] hub 1-1:1.0: USB hub found
[    5.377534] hub 1-1:1.0: 7 ports detected
[    5.653785] usb 1-1.4: new high-speed USB device number 3 using orion-ehci
[    5.775528] usb 1-1.4: New USB device found, idVendor=090c, idProduct=1000
[    5.782767] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    5.790181] usb 1-1.4: Product: Flash Drive
[    5.794400] usb 1-1.4: Manufacturer: Samsung
[    5.798706] usb 1-1.4: SerialNumber: 0334015100002306
[    5.821702] usb-storage 1-1.4:1.0: USB Mass Storage device detected
[    5.828423] scsi host2: usb-storage 1-1.4:1.0
[    5.835029] usbcore: registered new interface driver usb-storage
[    5.845557] usbcore: registered new interface driver uas
[    7.127384] scsi 2:0:0:0: Direct-Access     Samsung  Flash Drive      1100 PQ: 0 ANSI: 6
[    7.138959] sd 2:0:0:0: [sdb] 31326208 512-byte logical blocks: (16.0 GB/14.9 GiB)
[    7.156350] sd 2:0:0:0: [sdb] Write Protect is off
[    7.161217] sd 2:0:0:0: [sdb] Mode Sense: 43 00 00 00
[    7.169449] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    7.187182]  sdb: sdb1 sdb2 sdb3 < sdb5 >
[    7.200472] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[    8.200899] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
[    8.210940] random: nonblocking pool is initialized
[    8.672001] NET: Registered protocol family 10
[    8.678289] systemd[1]: Failed to insert module 'kdbus': Function not implemented
[    8.717803] systemd[1]: systemd 228 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[    8.736420] systemd[1]: Detected architecture arm.
[    8.755066] systemd[1]: Set hostname to <base>.
[    9.276375] systemd[1]: display-manager.service: Cannot add dependency job, ignoring: Unit display-manager.service failed to load: No such file or directory.
[    9.296041] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    9.318192] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    9.338120] systemd[1]: Listening on Syslog Socket.
[    9.354592] systemd[1]: Created slice System Slice.
[    9.370536] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    9.386536] systemd[1]: Created slice system-serial\x2dgetty.slice.
[    9.402064] systemd[1]: Listening on udev Kernel Socket.
[    9.418162] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    9.437947] systemd[1]: Reached target Paths.
[    9.450408] systemd[1]: Listening on Journal Audit Socket.
[    9.466149] systemd[1]: Listening on Journal Socket.
[    9.487576] systemd[1]: Mounting POSIX Message Queue File System...
[    9.513150] systemd[1]: Starting Load Kernel Modules...
[    9.538924] systemd[1]: Mounting Debug File System...
[    9.569554] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    9.606652] systemd[1]: Created slice system-getty.slice.
[    9.626012] systemd[1]: Reached target Remote File Systems (Pre).
[    9.641949] systemd[1]: Reached target Remote File Systems.
[    9.658110] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    9.678089] systemd[1]: Listening on Journal Socket (/dev/log).
[    9.697178] systemd[1]: Starting Journal Service...
[    9.714180] systemd[1]: Listening on udev Control Socket.
[    9.730255] systemd[1]: Reached target Encrypted Volumes.
[    9.746835] systemd[1]: Listening on fsck to fsckd communication Socket.
[    9.769713] systemd[1]: Starting Remount Root and Kernel File Systems...
[    9.794611] systemd[1]: Created slice User and Session Slice.
[    9.818060] systemd[1]: Reached target Slices.
[    9.857713] systemd[1]: Mounted Debug File System.
[    9.862645] EXT4-fs (sdb2): re-mounted. Opts: errors=remount-ro
[    9.890087] systemd[1]: Mounted POSIX Message Queue File System.
[    9.923506] systemd[1]: Started Load Kernel Modules.
[    9.951590] systemd[1]: Started Create list of required static device nodes for the current kernel.
[    9.983193] systemd[1]: Started Remount Root and Kernel File Systems.
[   10.010710] systemd[1]: Started Journal Service.
[   10.541158] systemd-journald[154]: Received request to flush runtime journal from PID 1
[   11.149339] MV-CESA:Could not register sha1 driver
[   11.154214] MV-CESA:Could not register hmac-sha1 driver
[   11.306775] xgifb: module is from the staging directory, the quality is unknown, you have been warned.
[   11.321848] orion_wdt: Initial timeout 21 sec
[   11.400229] xgifb 0000:01:00.0: Relocate IO address: 10000 [00010030]
[   11.406800] pci 0000:00:01.0: enabling device (0140 -> 0143)
[   11.412535] xgifb 0000:01:00.0: chipid = 32
[   11.416766] xgifb: SR14=51 DramSzie 2000000 ChannelNum 1
[   11.567483] cs42l51 0-004a: Cirrus Logic CS42L51, Revision: 01
[   11.613181] sd 1:0:0:0: Attached scsi generic sg0 type 0
[   11.620784] xgifb 0000:01:00.0: Framebuffer at 0xe0000000, mapped to 0xe1000000, size 32768k
[   11.629330] xgifb 0000:01:00.0: MMIO at 0xe4000000, mapped to 0xe0f00000, size 256k
[   11.640801] xgifb 0000:01:00.0: No or unknown bridge type detected
[   11.647036] xgifb: Default mode is 800x600x16 (60Hz)
[   11.678010] sd 2:0:0:0: Attached scsi generic sg1 type 0
[   11.777850] asoc-simple-card sound: cs42l51-hifi <-> i2s mapping ok
[   11.837937] cs42l51 0-004a: ASoC: mux DAC Mux has no paths
[   13.182598] Adding 698364k swap on /dev/sdb5.  Priority:-1 extents:1 across:698364k FS
[   13.497773] EXT4-fs (sdb1): mounting ext2 file system using the ext4 subsystem
[   13.534109] EXT4-fs (sdb1): mounted filesystem without journal. Opts: (null)
[   13.878770] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[   15.203621] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   18.323832] mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 1000 Mb/s, full duplex, flow control disabled
[   18.333788] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

[-- Attachment #5: Type: text/plain, Size: 197 bytes --]



In particular

> rbthomas@base:~$ dmesg | grep sound    
> [   11.777850] asoc-simple-card sound: cs42l51-hifi <-> i2s mapping ok

Everything is working fine now.

Thanks for all the help!
Rick

[PATCH 1/2] ARM: DTS: kirkwood-openrd-client: fix audio

[Rick Thomas]

On Jan 25, 2016, at 10:24 AM, Aaro Koskinen <aaro.koskinen@iki.fi> wrote:

> 
> On my board I need to say "amixer set PCM on". Can you post the full
> output from "amixer" without any parameters?
> 
> Also check if you have this line in dmesg:
> 
> 	asoc-simple-card sound: cs42l51-hifi <-> i2s mapping ok
> 
> If it says "spdif" the player runs but is silent.
> 
> A.
> 

Here's the output of "amixer"

-------------- next part --------------
A non-text attachment was scrubbed...
Name: amixer.out
Type: application/octet-stream
Size: 2059 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20160125/825c4c7d/attachment.obj>
-------------- next part --------------


This is after having run alsamixer (per Martin's suggestion) and un-mute-ing everything I could find.

And here's the output of "dmesg"

-------------- next part --------------
A non-text attachment was scrubbed...
Name: dmesg.out
Type: application/octet-stream
Size: 18738 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20160125/825c4c7d/attachment-0001.obj>
-------------- next part --------------


In particular

> rbthomas at base:~$ dmesg | grep sound    
> [   11.777850] asoc-simple-card sound: cs42l51-hifi <-> i2s mapping ok

Everything is working fine now.

Thanks for all the help!
Rick

Re: [PATCH 1/2] ARM: DTS: kirkwood-openrd-client: fix audio

[Gregory CLEMENT]

Hi Aaro,
 
 On sam., janv. 23 2016, Aaro Koskinen <aaro.koskinen-X3B1VOXEql0@public.gmane.org> wrote:

> Fix audio on kirkwood-openrd-client:
>
> 1) The audio-controller was left disabled.
>
> 2) The probe fails because cs42l51 is missing #sound-dai-cells.
>
> 	/sound/simple-audio-card,codec: could not get #sound-dai-cells for /ocp@f1000000/i2c@11000/cs42l51@4a
> 	asoc-simple-card sound: parse error -22
> 	asoc-simple-card: probe of sound failed with error -22
>
> 3) The mapping is incorrect:
>
> 	asoc-simple-card sound: cs42l51-hifi <-> spdif mapping ok
>
>    should be:
>
> 	asoc-simple-card sound: cs42l51-hifi <-> i2s mapping ok
>
> Reported-by: Rick Thomas <rbthomas-e+AXbWqSrlAAvxtiuMwx3w@public.gmane.org>
> Signed-off-by: Aaro Koskinen <aaro.koskinen-X3B1VOXEql0@public.gmane.org>

Applied on mvebu/dt with Reviewed-by tag from Andrew Lunn and Tested-by
tag from Rick Thomas.

Thanks,

Gregory

> ---
>  arch/arm/boot/dts/kirkwood-openrd-client.dts | 6 +++++-
>  arch/arm/boot/dts/kirkwood.dtsi              | 2 +-
>  2 files changed, 6 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/boot/dts/kirkwood-openrd-client.dts b/arch/arm/boot/dts/kirkwood-openrd-client.dts
> index 887b9c1..96ff59d 100644
> --- a/arch/arm/boot/dts/kirkwood-openrd-client.dts
> +++ b/arch/arm/boot/dts/kirkwood-openrd-client.dts
> @@ -20,6 +20,9 @@
>  	compatible = "marvell,openrd-client", "marvell,openrd", "marvell,kirkwood-88f6281", "marvell,kirkwood";
>  
>  	ocp@f1000000 {
> +		audio-controller@a0000 {
> +			status = "okay";
> +		};
>  		i2c@11000 {
>  			status = "okay";
>  			clock-frequency = <400000>;
> @@ -27,6 +30,7 @@
>  			cs42l51: cs42l51@4a {
>  				compatible = "cirrus,cs42l51";
>  				reg = <0x4a>;
> +				#sound-dai-cells = <0>;
>  			};
>  		};
>  	};
> @@ -37,7 +41,7 @@
>  		simple-audio-card,mclk-fs = <256>;
>  
>  		simple-audio-card,cpu {
> -			sound-dai = <&audio0>;
> +			sound-dai = <&audio0 0>;
>  		};
>  
>  		simple-audio-card,codec {
> diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi
> index 7b5a4a1..7445a15 100644
> --- a/arch/arm/boot/dts/kirkwood.dtsi
> +++ b/arch/arm/boot/dts/kirkwood.dtsi
> @@ -381,7 +381,7 @@
>  
>  		audio0: audio-controller@a0000 {
>  			compatible = "marvell,kirkwood-audio";
> -			#sound-dai-cells = <0>;
> +			#sound-dai-cells = <1>;
>  			reg = <0xa0000 0x2210>;
>  			interrupts = <24>;
>  			clocks = <&gate_clk 9>;
> -- 
> 2.4.0
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

-- 
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 1/2] ARM: DTS: kirkwood-openrd-client: fix audio

[Gregory CLEMENT]

Hi Aaro,
 
 On sam., janv. 23 2016, Aaro Koskinen <aaro.koskinen@iki.fi> wrote:

> Fix audio on kirkwood-openrd-client:
>
> 1) The audio-controller was left disabled.
>
> 2) The probe fails because cs42l51 is missing #sound-dai-cells.
>
> 	/sound/simple-audio-card,codec: could not get #sound-dai-cells for /ocp at f1000000/i2c at 11000/cs42l51 at 4a
> 	asoc-simple-card sound: parse error -22
> 	asoc-simple-card: probe of sound failed with error -22
>
> 3) The mapping is incorrect:
>
> 	asoc-simple-card sound: cs42l51-hifi <-> spdif mapping ok
>
>    should be:
>
> 	asoc-simple-card sound: cs42l51-hifi <-> i2s mapping ok
>
> Reported-by: Rick Thomas <rbthomas@pobox.com>
> Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>

Applied on mvebu/dt with Reviewed-by tag from Andrew Lunn and Tested-by
tag from Rick Thomas.

Thanks,

Gregory

> ---
>  arch/arm/boot/dts/kirkwood-openrd-client.dts | 6 +++++-
>  arch/arm/boot/dts/kirkwood.dtsi              | 2 +-
>  2 files changed, 6 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/boot/dts/kirkwood-openrd-client.dts b/arch/arm/boot/dts/kirkwood-openrd-client.dts
> index 887b9c1..96ff59d 100644
> --- a/arch/arm/boot/dts/kirkwood-openrd-client.dts
> +++ b/arch/arm/boot/dts/kirkwood-openrd-client.dts
> @@ -20,6 +20,9 @@
>  	compatible = "marvell,openrd-client", "marvell,openrd", "marvell,kirkwood-88f6281", "marvell,kirkwood";
>  
>  	ocp at f1000000 {
> +		audio-controller at a0000 {
> +			status = "okay";
> +		};
>  		i2c at 11000 {
>  			status = "okay";
>  			clock-frequency = <400000>;
> @@ -27,6 +30,7 @@
>  			cs42l51: cs42l51 at 4a {
>  				compatible = "cirrus,cs42l51";
>  				reg = <0x4a>;
> +				#sound-dai-cells = <0>;
>  			};
>  		};
>  	};
> @@ -37,7 +41,7 @@
>  		simple-audio-card,mclk-fs = <256>;
>  
>  		simple-audio-card,cpu {
> -			sound-dai = <&audio0>;
> +			sound-dai = <&audio0 0>;
>  		};
>  
>  		simple-audio-card,codec {
> diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi
> index 7b5a4a1..7445a15 100644
> --- a/arch/arm/boot/dts/kirkwood.dtsi
> +++ b/arch/arm/boot/dts/kirkwood.dtsi
> @@ -381,7 +381,7 @@
>  
>  		audio0: audio-controller at a0000 {
>  			compatible = "marvell,kirkwood-audio";
> -			#sound-dai-cells = <0>;
> +			#sound-dai-cells = <1>;
>  			reg = <0xa0000 0x2210>;
>  			interrupts = <24>;
>  			clocks = <&gate_clk 9>;
> -- 
> 2.4.0
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

-- 
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com

[PATCH 2/2] ASoC: simple-card: don't fail if sysclk setting is not supported

[Aaro Koskinen]

Commit e22579713ae1 ("ASoC: simple card: set cpu-dai sysclk
with mclk-fs") added sysclk / SND_SOC_CLOCK_OUT setting, that makes
asoc_simple_card_hw_params fail if the operation is not supported,
although the intention clearly was to ignore ENOTSUPP. Fix it.

The patch fixes audio playback on Kirkwood / OpenRD client,
where the following errors are seen:

	asoc-simple-card sound: ASoC: machine hw_params failed: -524
	alsa-lib: /alsa-lib-1.0.28/src/pcm/pcm_hw.c:327:(snd_pcm_hw_hw_params) SNDRV_PCM_IOCTL_HW_PARAMS failed (-524): Unknown error 524

Fixes: e22579713ae1 ("ASoC: simple card: set cpu-dai sysclk with mclk-fs")
Signed-off-by: Aaro Koskinen <aaro.koskinen-X3B1VOXEql0@public.gmane.org>
---
 sound/soc/generic/simple-card.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/soc/generic/simple-card.c b/sound/soc/generic/simple-card.c
index 54c3320..ff6fcd9 100644
--- a/sound/soc/generic/simple-card.c
+++ b/sound/soc/generic/simple-card.c
@@ -100,7 +100,7 @@ static int asoc_simple_card_hw_params(struct snd_pcm_substream *substream,
 		if (ret && ret != -ENOTSUPP)
 			goto err;
 	}
-
+	return 0;
 err:
 	return ret;
 }
-- 
2.4.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 2/2] ASoC: simple-card: don't fail if sysclk setting is not supported

[Aaro Koskinen]

Commit e22579713ae1 ("ASoC: simple card: set cpu-dai sysclk
with mclk-fs") added sysclk / SND_SOC_CLOCK_OUT setting, that makes
asoc_simple_card_hw_params fail if the operation is not supported,
although the intention clearly was to ignore ENOTSUPP. Fix it.

The patch fixes audio playback on Kirkwood / OpenRD client,
where the following errors are seen:

	asoc-simple-card sound: ASoC: machine hw_params failed: -524
	alsa-lib: /alsa-lib-1.0.28/src/pcm/pcm_hw.c:327:(snd_pcm_hw_hw_params) SNDRV_PCM_IOCTL_HW_PARAMS failed (-524): Unknown error 524

Fixes: e22579713ae1 ("ASoC: simple card: set cpu-dai sysclk with mclk-fs")
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
---
 sound/soc/generic/simple-card.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/soc/generic/simple-card.c b/sound/soc/generic/simple-card.c
index 54c3320..ff6fcd9 100644
--- a/sound/soc/generic/simple-card.c
+++ b/sound/soc/generic/simple-card.c
@@ -100,7 +100,7 @@ static int asoc_simple_card_hw_params(struct snd_pcm_substream *substream,
 		if (ret && ret != -ENOTSUPP)
 			goto err;
 	}
-
+	return 0;
 err:
 	return ret;
 }
-- 
2.4.0

Re: [PATCH 2/2] ASoC: simple-card: don't fail if sysclk setting is not supported

[Andrew Lunn]

On Sun, Jan 24, 2016 at 12:36:40AM +0200, Aaro Koskinen wrote:
> Commit e22579713ae1 ("ASoC: simple card: set cpu-dai sysclk
> with mclk-fs") added sysclk / SND_SOC_CLOCK_OUT setting, that makes
> asoc_simple_card_hw_params fail if the operation is not supported,
> although the intention clearly was to ignore ENOTSUPP. Fix it.
> 
> The patch fixes audio playback on Kirkwood / OpenRD client,
> where the following errors are seen:
> 
> 	asoc-simple-card sound: ASoC: machine hw_params failed: -524
> 	alsa-lib: /alsa-lib-1.0.28/src/pcm/pcm_hw.c:327:(snd_pcm_hw_hw_params) SNDRV_PCM_IOCTL_HW_PARAMS failed (-524): Unknown error 524
> 
> Fixes: e22579713ae1 ("ASoC: simple card: set cpu-dai sysclk with mclk-fs")
> Signed-off-by: Aaro Koskinen <aaro.koskinen-X3B1VOXEql0@public.gmane.org>

Reviewed-by: Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>

	     Andrew

> ---
>  sound/soc/generic/simple-card.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/sound/soc/generic/simple-card.c b/sound/soc/generic/simple-card.c
> index 54c3320..ff6fcd9 100644
> --- a/sound/soc/generic/simple-card.c
> +++ b/sound/soc/generic/simple-card.c
> @@ -100,7 +100,7 @@ static int asoc_simple_card_hw_params(struct snd_pcm_substream *substream,
>  		if (ret && ret != -ENOTSUPP)
>  			goto err;
>  	}
> -
> +	return 0;
>  err:
>  	return ret;
>  }
> -- 
> 2.4.0
> 
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 2/2] ASoC: simple-card: don't fail if sysclk setting is not supported

[Andrew Lunn]

On Sun, Jan 24, 2016 at 12:36:40AM +0200, Aaro Koskinen wrote:
> Commit e22579713ae1 ("ASoC: simple card: set cpu-dai sysclk
> with mclk-fs") added sysclk / SND_SOC_CLOCK_OUT setting, that makes
> asoc_simple_card_hw_params fail if the operation is not supported,
> although the intention clearly was to ignore ENOTSUPP. Fix it.
> 
> The patch fixes audio playback on Kirkwood / OpenRD client,
> where the following errors are seen:
> 
> 	asoc-simple-card sound: ASoC: machine hw_params failed: -524
> 	alsa-lib: /alsa-lib-1.0.28/src/pcm/pcm_hw.c:327:(snd_pcm_hw_hw_params) SNDRV_PCM_IOCTL_HW_PARAMS failed (-524): Unknown error 524
> 
> Fixes: e22579713ae1 ("ASoC: simple card: set cpu-dai sysclk with mclk-fs")
> Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>

Reviewed-by: Andrew Lunn <andrew@lunn.ch>

	     Andrew

> ---
>  sound/soc/generic/simple-card.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/sound/soc/generic/simple-card.c b/sound/soc/generic/simple-card.c
> index 54c3320..ff6fcd9 100644
> --- a/sound/soc/generic/simple-card.c
> +++ b/sound/soc/generic/simple-card.c
> @@ -100,7 +100,7 @@ static int asoc_simple_card_hw_params(struct snd_pcm_substream *substream,
>  		if (ret && ret != -ENOTSUPP)
>  			goto err;
>  	}
> -
> +	return 0;
>  err:
>  	return ret;
>  }
> -- 
> 2.4.0
> 

Applied "ASoC: simple-card: don't fail if sysclk setting is not supported" to the asoc tree

[Mark Brown]

The patch

   ASoC: simple-card: don't fail if sysclk setting is not supported

has been applied to the asoc tree at

   git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git 

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.  

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

>From ee43a1a0cd2a8f33cddfa1323a60b5cfcf865ba0 Mon Sep 17 00:00:00 2001
From: Aaro Koskinen <aaro.koskinen@iki.fi>
Date: Sun, 24 Jan 2016 00:36:40 +0200
Subject: [PATCH] ASoC: simple-card: don't fail if sysclk setting is not
 supported

Commit e22579713ae1 ("ASoC: simple card: set cpu-dai sysclk
with mclk-fs") added sysclk / SND_SOC_CLOCK_OUT setting, that makes
asoc_simple_card_hw_params fail if the operation is not supported,
although the intention clearly was to ignore ENOTSUPP. Fix it.

The patch fixes audio playback on Kirkwood / OpenRD client,
where the following errors are seen:

	asoc-simple-card sound: ASoC: machine hw_params failed: -524
	alsa-lib: /alsa-lib-1.0.28/src/pcm/pcm_hw.c:327:(snd_pcm_hw_hw_params) SNDRV_PCM_IOCTL_HW_PARAMS failed (-524): Unknown error 524

Fixes: e22579713ae1 ("ASoC: simple card: set cpu-dai sysclk with mclk-fs")
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 sound/soc/generic/simple-card.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/soc/generic/simple-card.c b/sound/soc/generic/simple-card.c
index 1ded8811598e..2389ab47e25f 100644
--- a/sound/soc/generic/simple-card.c
+++ b/sound/soc/generic/simple-card.c
@@ -99,7 +99,7 @@ static int asoc_simple_card_hw_params(struct snd_pcm_substream *substream,
 		if (ret && ret != -ENOTSUPP)
 			goto err;
 	}
-
+	return 0;
 err:
 	return ret;
 }
-- 
2.7.0.rc3