[PATCH 1/3] u_boot_pylib: Support running coverage on selected functions

All of lore.kernel.org
 help / color / mirror / Atom feed

* [PATCH 1/3] u_boot_pylib: Support running coverage on selected functions
@ 2024-09-30 18:51 Simon Glass
  2024-09-30 18:51 ` [PATCH 2/3] binman: Support getting test-coverage on just one test Simon Glass
                   ` (2 more replies)
  0 siblings, 3 replies; 8+ messages in thread
From: Simon Glass @ 2024-09-30 18:51 UTC (permalink / raw)
  To: U-Boot Mailing List; +Cc: Tom Rini, Brian Ruley, Marek Vasut, Simon Glass

At present run_test_coverage() assumes you want code coverage for the
entire code base. This is the normal situation, but sometimes it is
useful to see the coverage provided by just a single test. Add support
for this.

Signed-off-by: Simon Glass <sjg@chromium.org>
---

 tools/u_boot_pylib/test_util.py | 13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)

diff --git a/tools/u_boot_pylib/test_util.py b/tools/u_boot_pylib/test_util.py
index 857ce58c98c..dd671965263 100644
--- a/tools/u_boot_pylib/test_util.py
+++ b/tools/u_boot_pylib/test_util.py
@@ -23,8 +23,9 @@ except:
     use_concurrent = False
 
 
-def run_test_coverage(prog, filter_fname, exclude_list, build_dir, required=None,
-                    extra_args=None, single_thread='-P1'):
+def run_test_coverage(prog, filter_fname, exclude_list, build_dir,
+                      required=None, extra_args=None, single_thread='-P1',
+                      args=None):
     """Run tests and check that we get 100% coverage
 
     Args:
@@ -42,6 +43,7 @@ def run_test_coverage(prog, filter_fname, exclude_list, build_dir, required=None
         single_thread (str): Argument string to make the tests run
             single-threaded. This is necessary to get proper coverage results.
             The default is '-P0'
+        args (list of str): List of tests to run, or None to run all
 
     Raises:
         ValueError if the code coverage is not 100%
@@ -66,9 +68,10 @@ def run_test_coverage(prog, filter_fname, exclude_list, build_dir, required=None
                'coverage')
 
     cmd = ('%s%s run '
-           '--omit "%s" %s %s %s %s' % (prefix, covtool, ','.join(glob_list),
-                                        prog, extra_args or '', test_cmd,
-                                        single_thread or '-P1'))
+           '--omit "%s" %s %s %s %s %s' % (prefix, covtool, ','.join(glob_list),
+                                           prog, extra_args or '', test_cmd,
+                                           single_thread or '-P1',
+                                           ' '.join(args) if args else ''))
     os.system(cmd)
     stdout = command.output(covtool, 'report')
     lines = stdout.splitlines()
-- 
2.34.1


^ permalink raw reply related	[flat|nested] 8+ messages in thread

* [PATCH 2/3] binman: Support getting test-coverage on just one test
  2024-09-30 18:51 [PATCH 1/3] u_boot_pylib: Support running coverage on selected functions Simon Glass
@ 2024-09-30 18:51 ` Simon Glass
  2024-10-17 23:11   ` Simon Glass
  2024-09-30 18:51 ` [PATCH 3/3] binman: Add a tutorial on resolving test-coverage bugs Simon Glass
  2024-10-17 23:11 ` [PATCH 1/3] u_boot_pylib: Support running coverage on selected functions Simon Glass
  2 siblings, 1 reply; 8+ messages in thread
From: Simon Glass @ 2024-09-30 18:51 UTC (permalink / raw)
  To: U-Boot Mailing List
  Cc: Tom Rini, Brian Ruley, Marek Vasut, Simon Glass, Alper Nebi Yasak,
	Dario Binacchi, Neha Malcom Francis, Peng Fan, Philippe Reynes,
	Stefan Herbrechtsmeier

Pass the arguments through to test_util so that a single test can be
used.

Update the docs and add some missing backquotes in the same section.

Signed-off-by: Simon Glass <sjg@chromium.org>
---

 tools/binman/binman.rst | 5 ++++-
 tools/binman/main.py    | 6 +++---
 2 files changed, 7 insertions(+), 4 deletions(-)

diff --git a/tools/binman/binman.rst b/tools/binman/binman.rst
index f9a3a42183b..c25914312a8 100644
--- a/tools/binman/binman.rst
+++ b/tools/binman/binman.rst
@@ -2099,12 +2099,15 @@ Code coverage
 -------------
 
 Binman is a critical tool and is designed to be very testable. Entry
-implementations target 100% test coverage. Run 'binman test -T' to check this.
+implementations target 100% test coverage. Run ``binman test -T`` to check this.
 
 To enable Python test coverage on Debian-type distributions (e.g. Ubuntu)::
 
    $ sudo apt-get install python-coverage python3-coverage python-pytest
 
+You can also check the coverage provided by a single test, e.g.::
+
+   binman test -T testSimple
 
 Exit status
 -----------
diff --git a/tools/binman/main.py b/tools/binman/main.py
index dc817ddcd42..619840e7d55 100755
--- a/tools/binman/main.py
+++ b/tools/binman/main.py
@@ -85,7 +85,7 @@ def RunTests(debug, verbosity, processes, test_preserve_dirs, args, toolpath):
 
     return (0 if result.wasSuccessful() else 1)
 
-def RunTestCoverage(toolpath, build_dir):
+def RunTestCoverage(toolpath, build_dir, args):
     """Run the tests and check that we get 100% coverage"""
     glob_list = control.GetEntryModules(False)
     all_set = set([os.path.splitext(os.path.basename(item))[0]
@@ -97,7 +97,7 @@ def RunTestCoverage(toolpath, build_dir):
     test_util.run_test_coverage('tools/binman/binman', None,
             ['*test*', '*main.py', 'tools/patman/*', 'tools/dtoc/*',
              'tools/u_boot_pylib/*'],
-            build_dir, all_set, extra_args or None)
+            build_dir, all_set, extra_args or None, args=args)
 
 def RunBinman(args):
     """Main entry point to binman once arguments are parsed
@@ -117,7 +117,7 @@ def RunBinman(args):
 
     if args.cmd == 'test':
         if args.test_coverage:
-            RunTestCoverage(args.toolpath, args.build_dir)
+            RunTestCoverage(args.toolpath, args.build_dir, args.tests)
         else:
             ret_code = RunTests(args.debug, args.verbosity, args.processes,
                                 args.test_preserve_dirs, args.tests,
-- 
2.34.1


^ permalink raw reply related	[flat|nested] 8+ messages in thread

* Re: [PATCH 2/3] binman: Support getting test-coverage on just one test
  2024-09-30 18:51 ` [PATCH 2/3] binman: Support getting test-coverage on just one test Simon Glass
@ 2024-10-17 23:11   ` Simon Glass
  0 siblings, 0 replies; 8+ messages in thread
From: Simon Glass @ 2024-10-17 23:11 UTC (permalink / raw)
  To: Simon Glass
  Cc: Tom Rini, Brian Ruley, Marek Vasut, Alper Nebi Yasak,
	Dario Binacchi, Neha Malcom Francis, Peng Fan, Philippe Reynes,
	Stefan Herbrechtsmeier, U-Boot Mailing List

Pass the arguments through to test_util so that a single test can be
used.

Update the docs and add some missing backquotes in the same section.

Signed-off-by: Simon Glass <sjg@chromium.org>
---

 tools/binman/binman.rst | 5 ++++-
 tools/binman/main.py    | 6 +++---
 2 files changed, 7 insertions(+), 4 deletions(-)

Applied to u-boot-dm, thanks!

^ permalink raw reply	[flat|nested] 8+ messages in thread

* [PATCH 3/3] binman: Add a tutorial on resolving test-coverage bugs
  2024-09-30 18:51 [PATCH 1/3] u_boot_pylib: Support running coverage on selected functions Simon Glass
  2024-09-30 18:51 ` [PATCH 2/3] binman: Support getting test-coverage on just one test Simon Glass
@ 2024-09-30 18:51 ` Simon Glass
  2024-09-30 20:30   ` Heinrich Schuchardt
  2024-10-08 13:13   ` Mattijs Korpershoek
  2024-10-17 23:11 ` [PATCH 1/3] u_boot_pylib: Support running coverage on selected functions Simon Glass
  2 siblings, 2 replies; 8+ messages in thread
From: Simon Glass @ 2024-09-30 18:51 UTC (permalink / raw)
  To: U-Boot Mailing List
  Cc: Tom Rini, Brian Ruley, Marek Vasut, Simon Glass, Alexander Dahl,
	Alper Nebi Yasak, Caleb Connolly, Dario Binacchi,
	Heinrich Schuchardt, Joao Marcos Costa, Mattijs Korpershoek,
	Neha Malcom Francis, Neil Armstrong, Peng Fan, Philippe Reynes,
	Robert Marko, Sam Protsenko, Stefan Herbrechtsmeier, Sumit Garg

Provide a short description of how tests work, why they are so critical
and how to resolve gaps in Binman's test coverage.

Signed-off-by: Simon Glass <sjg@chromium.org>
---

 MAINTAINERS                  |   1 +
 doc/develop/binman_tests.rst | 734 +++++++++++++++++++++++++++++++++++
 doc/develop/index.rst        |   1 +
 tools/binman/binman.rst      |   5 +
 4 files changed, 741 insertions(+)
 create mode 100644 doc/develop/binman_tests.rst

diff --git a/MAINTAINERS b/MAINTAINERS
index 7ab39d91a55..65a9ea1face 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -909,6 +909,7 @@ BINMAN
 M:	Simon Glass <sjg@chromium.org>
 M:	Alper Nebi Yasak <alpernebiyasak@gmail.com>
 S:	Maintained
+F:	doc/develop/binman_tests.rst
 F:	tools/binman/
 
 BLKMAP
diff --git a/doc/develop/binman_tests.rst b/doc/develop/binman_tests.rst
new file mode 100644
index 00000000000..a632694a6fe
--- /dev/null
+++ b/doc/develop/binman_tests.rst
@@ -0,0 +1,734 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+.. toctree::
+   :maxdepth: 1
+
+Binman Tests
+============
+
+.. contents::
+   :depth: 2
+   :local:
+
+There is some material on writing tests in the main Binman documentation
+(see :doc:`package/index`). This short guide is separate so people don't
+feel they have to read as much.
+
+Code and output is mostly included verbatim, which makes the doc longer, but
+avoids its becoming confusing when the output or referenced code changes in the
+future.
+
+Purpose
+-------
+
+The main purpose of tests in Binman is to make sure that Binman actually does
+what it is supposed to. Various people contribute code, refactoring is done
+over time, but U-Boot users (developers, SoC vendors, board vendors) rely on
+Binman producing images which function correctly. Without tests, a one-line
+change could unintentionally break a corner-case and the problem might not be
+noticed for months. Debugging an image-generation problem with a board you
+don't have can be very hard.
+
+A secondary purpose is productivity. U-Boot contributors are busy and often
+have too much on their plate. Trying to figure out why their patch broke
+some other vendor's workflow can be very time-consuming and frustrating. By
+building in tests from the start, this is largely avoided. If your change has
+full test coverage and doesn't break any test, all is well and no one can
+complain.
+
+A lessor purpose is to document what Binman actually does. If a test covers a
+feature, it works. If there is no test coverage, no one can say for sure
+whether it works in all expected situations, certainly not wihout manual
+effort.
+
+In fact, strictly speaking it isn't completely clear what 'works' even means in
+the case where these is no test to cover the code. We are often left guessing
+as to what the documentation means, what was actually intended, etc.
+
+Finally, code-coverage helps to remove 'zombie code', copied from elsewhere
+because it looks reasonable, but not actually needed. The same situation arises
+in silicon-chip design, where a part of the chip is not validated. If it isn't
+validated, it can be assumed not to work, either now or later, so it is best to
+remove that logic to avoid it causing problems.
+
+Setting up
+----------
+
+Binman tests use various utility programs. Most of these are documented in
+:doc:`../build/gcc`. But some are SoC-specific. To fetch these, tell Binman to
+fetch or build any missing tools:
+
+.. code-block:: bash
+
+    $ binman tool -f missing
+
+When this completes successfully, you can list the tools. You should see
+something like this:
+
+.. code-block:: bash
+
+    $ binman tool -l
+    Name             Version      Description                Path
+    ---------------  -----------  -------------------------  ------------------------------
+    bootgen          ****** Bootg Xilinx Bootgen             /home/sglass/.binman-tools/bootgen
+    bzip2            1.0.8        bzip2 compression          /usr/bin/bzip2
+    cbfstool         unknown      Manipulate CBFS files      /home/sglass/bin/cbfstool
+    fdt_add_pubkey   unknown      Generate image for U-Boot  /home/sglass/bin/fdt_add_pubkey
+    fdtgrep          unknown      Grep devicetree files      /home/sglass/bin/fdtgrep
+    fiptool          v2.11.0(rele Manipulate ATF FIP files   /home/sglass/.binman-tools/fiptool
+    futility         v0.0.1-9f2e9 Chromium OS firmware utili /home/sglass/.binman-tools/futility
+    gzip             1.12         gzip compression           /usr/bin/gzip
+    ifwitool         unknown      Manipulate Intel IFWI file /home/sglass/.binman-tools/ifwitool
+    lz4              v1.9.4       lz4 compression            /usr/bin/lz4
+    lzma_alone       9.22 beta    lzma_alone compression     /usr/bin/lzma_alone
+    lzop             v1.04        lzo compression            /usr/bin/lzop
+    mkeficapsule     2024.10-rc5- mkeficapsule tool for gene /home/sglass/bin/mkeficapsule
+    mkimage          2024.10-rc5- Generate image for U-Boot  /home/sglass/bin/mkimage
+    openssl          3.0.13 30 Ja openssl cryptography toolk /usr/bin/openssl
+    xz               5.4.5        xz compression             /usr/bin/xz
+    zstd             v1.5.5       zstd compression           /usr/bin/zstd
+
+The tools are written to ``~/.binman-tools`` so add that to your ``PATH``.
+It's fine to have some of the tools elsewhere (e.g. ``~/bin``) so long as they
+are up-to-date. This allows you use the version of the tools intended for
+running tests.
+
+Now you should be able to actually run the tests:
+
+.. code-block:: bash
+
+    $ binman test
+    ======================== Running binman tests ========================
+    ......................................................................
+    ......................................................................
+    ......................................................................
+    ......................................................................
+    ......................................................................
+    ......................................................................
+    ......................................................................
+    ......................................................................
+    ........
+    ----------------------------------------------------------------------
+    Ran 568 tests in 2.578s
+
+    OK
+
+If this doesn't work, see if you can have some missing tools. Check that the
+dependencies are all there as above. If it is very slow, try installing
+concurrencytest so that the tests run in parallel.
+
+The next thing to set up is code coverage, using the -T flag:
+
+.. code-block:: bash
+
+    $ binman test -T
+    ======================== Running binman tests ========================
+    ......................................................................
+    ......................................................................
+    ......................................................................
+    ......................................................................
+    ......................................................................
+    ......................................................................
+    ......................................................................
+    ......................................................................
+    ........
+    ----------------------------------------------------------------------
+    Ran 568 tests in 17.367s
+
+    OK
+
+    99%
+    Name                                                    Stmts   Miss  Cover
+    ---------------------------------------------------------------------------
+    tools/binman/__init__.py                                    0      0   100%
+    tools/binman/bintool.py                                   263      0   100%
+    tools/binman/btool/bootgen.py                              21      0   100%
+    tools/binman/btool/btool_gzip.py                            5      0   100%
+    tools/binman/btool/bzip2.py                                 5      0   100%
+    tools/binman/btool/cbfstool.py                             24      0   100%
+    tools/binman/btool/cst.py                                  15      4    73%
+    tools/binman/btool/fdt_add_pubkey.py                       21      0   100%
+    tools/binman/btool/fdtgrep.py                              26      0   100%
+    tools/binman/btool/fiptool.py                              19      0   100%
+    tools/binman/btool/futility.py                             19      0   100%
+    tools/binman/btool/ifwitool.py                             22      0   100%
+    tools/binman/btool/lz4.py                                  22      0   100%
+    tools/binman/btool/lzma_alone.py                           34      0   100%
+    tools/binman/btool/lzop.py                                  5      0   100%
+    tools/binman/btool/mkeficapsule.py                         27      0   100%
+    tools/binman/btool/mkimage.py                              23      0   100%
+    tools/binman/btool/openssl.py                              42      0   100%
+    tools/binman/btool/xz.py                                    5      0   100%
+    tools/binman/btool/zstd.py                                  5      0   100%
+    tools/binman/cbfs_util.py                                 376      0   100%
+    tools/binman/cmdline.py                                    90      0   100%
+    tools/binman/control.py                                   409      0   100%
+    tools/binman/elf.py                                       241      0   100%
+    tools/binman/entry.py                                     548      0   100%
+    tools/binman/etype/alternates_fdt.py                       58      0   100%
+    tools/binman/etype/atf_bl31.py                              5      0   100%
+    tools/binman/etype/atf_fip.py                              67      0   100%
+    tools/binman/etype/blob.py                                 49      0   100%
+    tools/binman/etype/blob_dtb.py                             46      0   100%
+    tools/binman/etype/blob_ext.py                              9      0   100%
+    tools/binman/etype/blob_ext_list.py                        32      0   100%
+    tools/binman/etype/blob_named_by_arg.py                     9      0   100%
+    tools/binman/etype/blob_phase.py                           22      0   100%
+    tools/binman/etype/cbfs.py                                101      0   100%
+    tools/binman/etype/collection.py                           30      0   100%
+    tools/binman/etype/cros_ec_rw.py                            5      0   100%
+    tools/binman/etype/efi_capsule.py                          59      0   100%
+    tools/binman/etype/efi_empty_capsule.py                    33      0   100%
+    tools/binman/etype/encrypted.py                            34      0   100%
+    tools/binman/etype/fdtmap.py                               62      0   100%
+    tools/binman/etype/files.py                                35      0   100%
+    tools/binman/etype/fill.py                                 13      0   100%
+    tools/binman/etype/fit.py                                 311      0   100%
+    tools/binman/etype/fmap.py                                 37      0   100%
+    tools/binman/etype/gbb.py                                  37      0   100%
+    tools/binman/etype/image_header.py                         53      0   100%
+    tools/binman/etype/intel_cmc.py                             4      0   100%
+    tools/binman/etype/intel_descriptor.py                     39      0   100%
+    tools/binman/etype/intel_fit.py                            12      0   100%
+    tools/binman/etype/intel_fit_ptr.py                        17      0   100%
+    tools/binman/etype/intel_fsp.py                             4      0   100%
+    tools/binman/etype/intel_fsp_m.py                           4      0   100%
+    tools/binman/etype/intel_fsp_s.py                           4      0   100%
+    tools/binman/etype/intel_fsp_t.py                           4      0   100%
+    tools/binman/etype/intel_ifwi.py                           67      0   100%
+    tools/binman/etype/intel_me.py                              4      0   100%
+    tools/binman/etype/intel_mrc.py                             6      0   100%
+    tools/binman/etype/intel_refcode.py                         6      0   100%
+    tools/binman/etype/intel_vbt.py                             4      0   100%
+    tools/binman/etype/intel_vga.py                             4      0   100%
+    tools/binman/etype/mkimage.py                              84      0   100%
+    tools/binman/etype/null.py                                  9      0   100%
+    tools/binman/etype/nxp_imx8mcst.py                         78     59    24%
+    tools/binman/etype/nxp_imx8mimage.py                       38      6    84%
+    tools/binman/etype/opensbi.py                               5      0   100%
+    tools/binman/etype/powerpc_mpc85xx_bootpg_resetvec.py       6      0   100%
+    tools/binman/etype/pre_load.py                             76      0   100%
+    tools/binman/etype/rockchip_tpl.py                          5      0   100%
+    tools/binman/etype/scp.py                                   5      0   100%
+    tools/binman/etype/section.py                             418      0   100%
+    tools/binman/etype/tee_os.py                               31      0   100%
+    tools/binman/etype/text.py                                 21      0   100%
+    tools/binman/etype/ti_board_config.py                     139      0   100%
+    tools/binman/etype/ti_dm.py                                 5      0   100%
+    tools/binman/etype/ti_secure.py                            65      0   100%
+    tools/binman/etype/ti_secure_rom.py                       117      0   100%
+    tools/binman/etype/u_boot.py                                7      0   100%
+    tools/binman/etype/u_boot_dtb.py                            9      0   100%
+    tools/binman/etype/u_boot_dtb_with_ucode.py                51      0   100%
+    tools/binman/etype/u_boot_elf.py                           19      0   100%
+    tools/binman/etype/u_boot_env.py                           27      0   100%
+    tools/binman/etype/u_boot_expanded.py                       4      0   100%
+    tools/binman/etype/u_boot_img.py                            7      0   100%
+    tools/binman/etype/u_boot_nodtb.py                          7      0   100%
+    tools/binman/etype/u_boot_spl.py                            8      0   100%
+    tools/binman/etype/u_boot_spl_bss_pad.py                   14      0   100%
+    tools/binman/etype/u_boot_spl_dtb.py                        9      0   100%
+    tools/binman/etype/u_boot_spl_elf.py                        8      0   100%
+    tools/binman/etype/u_boot_spl_expanded.py                  12      0   100%
+    tools/binman/etype/u_boot_spl_nodtb.py                      8      0   100%
+    tools/binman/etype/u_boot_spl_pubkey_dtb.py                32      0   100%
+    tools/binman/etype/u_boot_spl_with_ucode_ptr.py             8      0   100%
+    tools/binman/etype/u_boot_tpl.py                            8      0   100%
+    tools/binman/etype/u_boot_tpl_bss_pad.py                   14      0   100%
+    tools/binman/etype/u_boot_tpl_dtb.py                        9      0   100%
+    tools/binman/etype/u_boot_tpl_dtb_with_ucode.py             8      0   100%
+    tools/binman/etype/u_boot_tpl_elf.py                        8      0   100%
+    tools/binman/etype/u_boot_tpl_expanded.py                  12      0   100%
+    tools/binman/etype/u_boot_tpl_nodtb.py                      8      0   100%
+    tools/binman/etype/u_boot_tpl_with_ucode_ptr.py            12      0   100%
+    tools/binman/etype/u_boot_ucode.py                         33      0   100%
+    tools/binman/etype/u_boot_vpl.py                            8      0   100%
+    tools/binman/etype/u_boot_vpl_bss_pad.py                   14      0   100%
+    tools/binman/etype/u_boot_vpl_dtb.py                        9      0   100%
+    tools/binman/etype/u_boot_vpl_elf.py                        8      0   100%
+    tools/binman/etype/u_boot_vpl_expanded.py                  12      0   100%
+    tools/binman/etype/u_boot_vpl_nodtb.py                      8      0   100%
+    tools/binman/etype/u_boot_with_ucode_ptr.py                42      0   100%
+    tools/binman/etype/vblock.py                               38      0   100%
+    tools/binman/etype/x86_reset16.py                           7      0   100%
+    tools/binman/etype/x86_reset16_spl.py                       7      0   100%
+    tools/binman/etype/x86_reset16_tpl.py                       7      0   100%
+    tools/binman/etype/x86_start16.py                           7      0   100%
+    tools/binman/etype/x86_start16_spl.py                       7      0   100%
+    tools/binman/etype/x86_start16_tpl.py                       7      0   100%
+    tools/binman/etype/x509_cert.py                            71      0   100%
+    tools/binman/etype/xilinx_bootgen.py                       72      0   100%
+    tools/binman/fip_util.py                                  202      0   100%
+    tools/binman/fmap_util.py                                  49      0   100%
+    tools/binman/image.py                                     181      0   100%
+    tools/binman/state.py                                     201      0   100%
+    ---------------------------------------------------------------------------
+    TOTAL                                                    5954     69    99%
+
+    To get a report in 'htmlcov/index.html', type: python3-coverage html
+    Coverage error: 99%, but should be 100%
+    ValueError: Test coverage failure
+
+Unfortunately the run failed. As it suggests, create a report:
+
+.. code-block:: bash
+
+    $ python3-coverage html
+    Wrote HTML report to htmlcov/index.html
+
+If you open that file in the browser, you can see which files are not reaching
+100% and click on them. Here is ``nxp_imx8mimage.py``, for example:
+
+.. code-block:: python
+
+    43        # Generate mkimage configuration file similar to imx8mimage.cfg
+    44        # and pass it to mkimage to generate SPL image for us here.
+    45        cfg_fname = tools.get_output_filename('nxp.imx8mimage.cfg.%s' % uniq)
+    46        with open(cfg_fname, 'w') as outf:
+    47            print('ROM_VERSION v%d' % self.rom_version, file=outf)
+    48            print('BOOT_FROM %s' % self.boot_from, file=outf)
+    49            print('LOADER %s %#x' % (input_fname, self.loader_address), file=outf)
+    50
+    51        output_fname = tools.get_output_filename(f'cfg-out.{uniq}')
+    52        args = ['-d', input_fname, '-n', cfg_fname, '-T', 'imx8mimage',
+    53                output_fname]
+    54        if self.mkimage.run_cmd(*args) is not None:
+    55            return tools.read_file(output_fname)
+    56        else:
+    57            # Bintool is missing; just use the input data as the output
+    58 x          self.record_missing_bintool(self.mkimage)
+    59 x          return data
+    60
+    61    def SetImagePos(self, image_pos):
+    62        # Customized SoC specific SetImagePos which skips the mkimage etype
+    63        # implementation and removes the 0x48 offset introduced there. That
+    64        # offset is only used for uImage/fitImage, which is not the case in
+    65        # here.
+    66        upto = 0x00
+    67        for entry in super().GetEntries().values():
+    68 x          entry.SetOffsetSize(upto, None)
+    69
+    70            # Give up if any entries lack a size
+    71 x          if entry.size is None:
+    72 x              return
+    73 x          upto += entry.size
+    74
+    75        Entry_section.SetImagePos(self, image_pos)
+
+Most of the file is covered, but the lines marked with ``x`` indicate missing
+coverage. The will show up red in your browser.
+
+What is a test?
+---------------
+
+A test is a function in ``ftest.py`` which uses an image description in
+``tools/binman/test`` to perform some operations and exercise the code. Some
+tests are just a few lines; some are more complicated.
+
+Here is a simple test:
+
+.. code-block:: python
+
+    def testSimple(self):
+        """Test a simple binman with a single file"""
+        data = self._DoReadFile('005_simple.dts')
+        self.assertEqual(U_BOOT_DATA, data)
+
+This test tells Binman to build an image using the description. Then it checks
+that the resulting image looks correct. The image description is:
+
+.. code-block:: devicetree
+
+    /dts-v1/;
+
+    / {
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        binman {
+            u-boot {
+            };
+        };
+    };
+
+As you will know from the Binman documentation, this says that there is
+one image and it contains the U-Boot binary. So this test builds an image
+consisting of a U-Boot binary, then checks that it does indeed have just a
+U-Boot binary in it.
+
+Test data
+---------
+
+Using real binaries (like ``u-boot.bin``) to test Binman would be quite tedious.
+Every output file would be large and it would be hard to tell by looking at the
+output (e.g. with a hex dump) if a particular entry contains ``u-boot.bin`` or
+``u-boot-spl.bin`` or something else.
+
+Binman gets around this by using simple placeholders. Here is the placeholder
+for u-boot.bin:
+
+.. code-block:: python
+
+    U_BOOT_DATA           = b'1234'
+
+This is just bytes. So the test above checks that the output image contains
+these four bytes. This makes verification fast for Binman and very easy for
+humans.
+
+Even the devicetree is a placeholder:
+
+.. code-block:: python
+
+    U_BOOT_DTB_DATA       = b'udtb'
+
+But for some tests you need to use the real devicetree. In that case you can
+use ``_DoReadFileRealDtb()``. See ``testUpdateFdtAll()`` for an example of how
+to check the devicetree updated by Binman.
+
+Test structure
+--------------
+
+Each test is designed to test just one thing. Binman tests are named according
+to what they are testing. Individually they don't do very much, but as a whole
+they test every line of code in Binman.
+
+So ``testSimple()`` is designed to check that Binman can build the
+simplest-possible image that isn't completely empty.
+
+Another type of test is one which checks error-handling, for example:
+
+.. code-block:: python
+
+    def testFillNoSize(self):
+        """Test for an fill entry type with no size"""
+        with self.assertRaises(ValueError) as e:
+            self._DoReadFile('070_fill_no_size.dts')
+        self.assertIn("'fill' entry is missing properties: size",
+                      str(e.exception))
+
+This test deliberately tries to provoke an error. The image description is:
+
+.. code-block:: devicetree
+
+    // SPDX-License-Identifier: GPL-2.0+
+    /dts-v1/;
+
+    / {
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        binman {
+            size = <16>;
+            fill {
+                fill-byte = [ff];
+            };
+        };
+    };
+
+You can see that there is no size for the 'fill' entry, so we would expect
+Binman to complain. The test checks that it actually does. It also checks the
+error message produced by Binman. Sometimes you need to add several tests, each
+with their own broken image description, in order to check all the error cases.
+
+Sometimes you need to capture the console output of Binman, to check it is
+correct. You can to this with ``test_util.capture_sys_output()``, for example:
+
+.. code-block:: python
+
+    with test_util.capture_sys_output() as (_, stderr):
+        self._DoTestFile('071_gbb.dts', force_missing_bintools='futility',
+                         entry_args=entry_args)
+    err = stderr.getvalue()
+    self.assertRegex(err, "Image 'image'.*missing bintools.*: futility")
+
+The test collects the output and checks it with a regular expression. If you
+need to see the test output (e.g. to debug it), you will have to remove that
+capture line.
+
+How to add a new test
+---------------------
+
+This section explains the process of writing a new test. It uses an example to
+help with this, but your code will be different.
+
+Generally you are adding a test because you are adding a new entry type
+('etype'). So start by creating the shortest and simplest image-description you
+can, which contains the new etype. Put it in a numbered file in
+``tool/binman/test`` so that it comes last. All the numbers are unique and there
+are no gaps.
+
+Example from ``tools/binman/test/339_nxp_imx8.dts``:
+
+.. code-block:: devicetree
+
+    // SPDX-License-Identifier: GPL-2.0+
+
+    /dts-v1/;
+
+    / {
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        binman {
+            nxp-imx8mimage {
+                args;    /* TODO: Needed by mkimage etype superclass */
+                nxp,boot-from = "sd";
+                nxp,rom-version = <1>;
+                nxp,loader-address = <0x10>;
+            };
+        };
+    };
+
+Note that you should use tabs in the file, not spaces. You can see that this has
+been cut down to the bare minimum, just enough to include the etype and the
+arguments it needs. This is of course not a real image. It will not boot on
+anything. But that's fine; we are just trying to test this one etype. Try not
+to add any other sections and etypes unless they are absolutely essential for
+your test to work. This helps others too: they don't need to understand the full
+complexity of your etype just to read your test.
+
+Then create your test by adding a new function at the end of ``ftest.py``:
+
+.. code-block:: python
+
+    def testNxpImx8Image(self):
+        """Test that binman can produce an iMX8 image"""
+        self._DoTestFile('339_nxp_imx8.dts')
+
+This uses the test file that you created. It doesn't check anything, it just
+runs the image description through binman.
+
+Let's run it:
+
+.. code-block:: bash
+
+    $ binman test testNxpImx8Image
+    ======================== Running binman tests ========================
+    .
+    ----------------------------------------------------------------------
+    Ran 1 test in 0.242s
+
+    OK
+
+So the test passes. It doesn't really do a lot, but it does exercise the etype.
+The next step is to update it to actually check the output:
+
+.. code-block:: python
+
+    def testNxpImx8Image(self):
+        """Test that binman can produce an iMX8 image"""
+        data = self._DoReadFile('339_nxp_imx8.dts')
+        print('data', len(data))
+
+The ``_DoReadFile()`` function is documented in the code. It returns the image
+contents as the first part of a tuple.
+
+Running this we see:
+
+.. code-block:: bash
+
+    data 2200
+
+So it is producing a little over 8K of data. Your etype will be different, but
+in any case you can add Python code to check that this data is actually correct,
+based on your knowledge of your etype. Note that you should not be checking
+whether the external tools (called 'bintools' in Binman) are actually working,
+since presumably they have their own tests. You just need to check that the
+image seems reasonable, e.g. is not empty, contains the expected sections, etc.
+
+When your etype does use a bintool, it also needs tests, but generally it will
+be tested by virtue of the etype test. This is because your etype must call the
+bintool to create the image. Sometimes you might need to add a test for a
+bintool error-condition, though.
+
+Finishing code coverage
+-----------------------
+
+The objective is to have test-coverage for every line of code that you add to
+Binman. So how can you tell? First, get a coverage report as described above.
+Look through the output for any files which are not at 100%. Add more test cases
+(image descriptions and new functions in ``ftest.py``) until you have covered
+each line.
+
+In the above example, here are some possible steps:
+
+#. The first red bit is where the ``mkimage`` call returns None. This can be
+   traced to ``Bintoolmkimage.mkimage()`` which calls
+   ``Bintool.run_cmd_result()`` and ``None`` means that ``mkimage`` is missing.
+   So the etype has code to handle that case, but it is never used. You can
+   look for other examples of ``self.mkimage`` returning ``None`` - e.g.
+   ``Entry_mkimage.BuildSectionData()`` does this. The clue for finding this is
+   that the ``nxp-imx8mimage`` etype is based on ``Entry_mkimage``:
+
+   .. code-block:: python
+
+       class Entry_nxp_imx8mimage(Entry_mkimage):
+
+   It must be tested somewhere...in this case ``testMkimage()`` doesn't do it,
+   but ``testMkimageMissing()`` immediately below that does. So you can create a
+   similar test, e.g.:
+
+   .. code-block:: python
+
+       def testNxpImx8ImageMkimageMissing(self):
+           """Test that binman can produce an iMX8 image"""
+           with test_util.capture_sys_output() as (_, stderr):
+               self._DoTestFile('339_nxp_imx8.dts',
+                                force_missing_bintools='mkimage')
+           err = stderr.getvalue()
+           self.assertRegex(err, "Image 'image'.*missing bintools.*: mkimage")
+
+   Note that this uses exactly the same image description as the first test.
+   It just checks what happens when the tool is missing. Checking the coverage
+   again, you will see that the first red bit has gone:
+
+   .. code-block:: bash
+
+       $ binman test -T
+       $ python3-coverage html
+
+#. The second red bit is for ``SetImagePos()``. You can see that it is iterating
+   through the sub-entries inside the ``nxp-imx8mimage`` entry. In the case of
+   the 339 file, there are no such entries, so this code inside the for() loop
+   isn't used:
+
+   .. code-block:: python
+
+       def SetImagePos(self, image_pos):
+        # Customized SoC specific SetImagePos which skips the mkimage etype
+        # implementation and removes the 0x48 offset introduced there. That
+        # offset is only used for uImage/fitImage, which is not the case in
+        # here.
+        upto = 0x00
+        for entry in super().GetEntries().values():
+            entry.SetOffsetSize(upto, None)
+
+            # Give up if any entries lack a size
+            if entry.size is None:
+                return
+            upto += entry.size
+
+        Entry_section.SetImagePos(self, image_pos)
+
+   The solution is to add an entry, e.g. in ``340_nxp_imx8_non_empty.dts``:
+
+   .. code-block:: devicetree
+
+       // SPDX-License-Identifier: GPL-2.0+
+
+       /dts-v1/;
+
+       / {
+           #address-cells = <1>;
+           #size-cells = <1>;
+
+           binman {
+               nxp-imx8mimage {
+                   args;    /* TODO: Needed by mkimage etype superclass */
+                   nxp,boot-from = "sd";
+                   nxp,rom-version = <1>;
+                   nxp,loader-address = <0x10>;
+
+                   u-boot {
+                   };
+               };
+           };
+       };
+
+   Now write a little test to use it:
+
+   .. code-block:: python
+
+       def testNxpImx8ImageNonEmpty(self):
+           """Test that binman can produce an iMX8 image with something in it"""
+            data = self._DoReadFile('340_nxp_imx8_non_empty.dts')
+            # check data here
+
+   With that, the second red bit goes away, because the for() loop is now used.
+
+#. There is one more red bit left, the ``return`` in ``SetImagePos()``. The
+   above effort got the for() loop to be executed, but it doesn't cover the
+   ``return``. It might have been copied from some other etype, e.g. the mkimage
+   one. See ``Entry_mkimage.SetImagePos()`` which contains the code:
+
+   .. code-block:: python
+
+       for entry in self.GetEntries().values():
+           entry.SetOffsetSize(upto, None)
+
+           # Give up if any entries lack a size
+           if entry.size is None:
+               return
+           upto += entry.size
+
+   But which test covers that code for mkimage? By figuring that out, you could
+   use a similar technique. One way to find out is to delete the two lines in
+   ``Entry_mkimage`` which check for entry.size being None and returning, then
+   see what breaks with ``binman test``:
+
+   .. code-block:: bash
+
+       ERROR: binman.ftest.TestFunctional.testMkimageCollection (subunit.RemotedTestCase)
+       binman.ftest.TestFunctional.testMkimageCollection
+       ----------------------------------------------------------------------
+       testtools.testresult.real._StringException: Traceback (most recent call last):
+       TypeError: unsupported operand type(s) for +=: 'int' and 'NoneType'
+
+       ======================================================================
+       ERROR: binman.ftest.TestFunctional.testMkimageImage (subunit.RemotedTestCase)
+       binman.ftest.TestFunctional.testMkimageImage
+       ----------------------------------------------------------------------
+       testtools.testresult.real._StringException: Traceback (most recent call last):
+       TypeError: unsupported operand type(s) for +=: 'int' and 'NoneType'
+
+       ======================================================================
+       ERROR: binman.ftest.TestFunctional.testMkimageSpecial (subunit.RemotedTestCase)
+       binman.ftest.TestFunctional.testMkimageSpecial
+       ----------------------------------------------------------------------
+       testtools.testresult.real._StringException: Traceback (most recent call last):
+       TypeError: unsupported operand type(s) for +=: 'int' and 'NoneType'
+
+   We can verify that you got the right test, by putting the lines back in and
+   getting coverage for just that test:
+
+   .. code-block:: bash
+
+       binman test -T testMkimageCollection
+       python3-coverage html
+
+   You will see a lot of red since we are seeing test coverage just for one
+   test, but if you look in ``mkimage.py`` at ``SetImagePos()`` you will see
+   that the ``return`` is covered (i.e. it is marked green).
+
+   Looking at the ``.dts`` files for each of these tests, none jumps out as
+   being relevant to our case. It seems that this code just isn't needed, so the
+   best solution is to delete those two lines from the function:
+
+   .. code-block:: python
+
+       def SetImagePos(self, image_pos):
+           # Customized SoC specific SetImagePos which skips the mkimage etype
+           # implementation and removes the 0x48 offset introduced there. That
+           # offset is only used for uImage/fitImage, which is not the case in
+           # here.
+           upto = 0x00
+           for entry in super().GetEntries().values():
+               entry.SetOffsetSize(upto, None)
+               upto += entry.size
+
+           Entry_section.SetImagePos(self, image_pos)
+
+We should check the updated code on a real build, to make sure it really
+isn't needed, of course.
+
+Now, the test coverage is complete!
+
+If we later discover a case where those lines are needed, we can add the
+lines back, along with a test for this case.
+
+Getting help
+------------
+
+If you are stuck and cannot work out how to add test coverage for your entry
+type, ask on the U-Boot mailing list, cc ``Simon Glass <sjg@chromium.org>`` or
+on irc ``sjg1``
diff --git a/doc/develop/index.rst b/doc/develop/index.rst
index 0d0e60ab56c..e75169ef14c 100644
--- a/doc/develop/index.rst
+++ b/doc/develop/index.rst
@@ -81,6 +81,7 @@ Testing
    py_testing
    tests_writing
    tests_sandbox
+   binman_tests
 
 Refactoring
 -----------
diff --git a/tools/binman/binman.rst b/tools/binman/binman.rst
index c25914312a8..381e55686f9 100644
--- a/tools/binman/binman.rst
+++ b/tools/binman/binman.rst
@@ -2194,6 +2194,11 @@ Use '-P 1' to disable this. It is automatically disabled when code coverage is
 being used (-T) since they are incompatible.
 
 
+Writing tests
+-------------
+
+See :doc:`../binman_tests`.
+
 Debugging tests
 ---------------
 
-- 
2.34.1


^ permalink raw reply related	[flat|nested] 8+ messages in thread

* Re: [PATCH 3/3] binman: Add a tutorial on resolving test-coverage bugs
  2024-09-30 18:51 ` [PATCH 3/3] binman: Add a tutorial on resolving test-coverage bugs Simon Glass
@ 2024-09-30 20:30   ` Heinrich Schuchardt
  2024-10-08 13:13   ` Mattijs Korpershoek
  1 sibling, 0 replies; 8+ messages in thread
From: Heinrich Schuchardt @ 2024-09-30 20:30 UTC (permalink / raw)
  To: Simon Glass, U-Boot Mailing List
  Cc: Tom Rini, Brian Ruley, Marek Vasut, Alexander Dahl,
	Alper Nebi Yasak, Caleb Connolly, Dario Binacchi,
	Joao Marcos Costa, Mattijs Korpershoek, Neha Malcom Francis,
	Neil Armstrong, Peng Fan, Philippe Reynes, Robert Marko,
	Sam Protsenko, Stefan Herbrechtsmeier, Sumit Garg



Am 30. September 2024 20:51:38 MESZ schrieb Simon Glass <sjg@chromium.org>:
>Provide a short description of how tests work, why they are so critical
>and how to resolve gaps in Binman's test coverage.

This is really a nice piece of documentation.

Acked-by: Heinrich Schuchardt <xypron.glpk@gmx.de>

>
>Signed-off-by: Simon Glass <sjg@chromium.org>
>---
>
> MAINTAINERS                  |   1 +
> doc/develop/binman_tests.rst | 734 +++++++++++++++++++++++++++++++++++
> doc/develop/index.rst        |   1 +
> tools/binman/binman.rst      |   5 +
> 4 files changed, 741 insertions(+)
> create mode 100644 doc/develop/binman_tests.rst
>
>diff --git a/MAINTAINERS b/MAINTAINERS
>index 7ab39d91a55..65a9ea1face 100644
>--- a/MAINTAINERS
>+++ b/MAINTAINERS
>@@ -909,6 +909,7 @@ BINMAN
> M:	Simon Glass <sjg@chromium.org>
> M:	Alper Nebi Yasak <alpernebiyasak@gmail.com>
> S:	Maintained
>+F:	doc/develop/binman_tests.rst
> F:	tools/binman/
> 
> BLKMAP
>diff --git a/doc/develop/binman_tests.rst b/doc/develop/binman_tests.rst
>new file mode 100644
>index 00000000000..a632694a6fe
>--- /dev/null
>+++ b/doc/develop/binman_tests.rst
>@@ -0,0 +1,734 @@
>+.. SPDX-License-Identifier: GPL-2.0+
>+
>+.. toctree::
>+   :maxdepth: 1
>+
>+Binman Tests
>+============
>+
>+.. contents::
>+   :depth: 2
>+   :local:
>+
>+There is some material on writing tests in the main Binman documentation
>+(see :doc:`package/index`). This short guide is separate so people don't
>+feel they have to read as much.
>+
>+Code and output is mostly included verbatim, which makes the doc longer, but
>+avoids its becoming confusing when the output or referenced code changes in the
>+future.
>+
>+Purpose
>+-------
>+
>+The main purpose of tests in Binman is to make sure that Binman actually does
>+what it is supposed to. Various people contribute code, refactoring is done
>+over time, but U-Boot users (developers, SoC vendors, board vendors) rely on
>+Binman producing images which function correctly. Without tests, a one-line
>+change could unintentionally break a corner-case and the problem might not be
>+noticed for months. Debugging an image-generation problem with a board you
>+don't have can be very hard.
>+
>+A secondary purpose is productivity. U-Boot contributors are busy and often
>+have too much on their plate. Trying to figure out why their patch broke
>+some other vendor's workflow can be very time-consuming and frustrating. By
>+building in tests from the start, this is largely avoided. If your change has
>+full test coverage and doesn't break any test, all is well and no one can
>+complain.
>+
>+A lessor purpose is to document what Binman actually does. If a test covers a
>+feature, it works. If there is no test coverage, no one can say for sure
>+whether it works in all expected situations, certainly not wihout manual
>+effort.
>+
>+In fact, strictly speaking it isn't completely clear what 'works' even means in
>+the case where these is no test to cover the code. We are often left guessing
>+as to what the documentation means, what was actually intended, etc.
>+
>+Finally, code-coverage helps to remove 'zombie code', copied from elsewhere
>+because it looks reasonable, but not actually needed. The same situation arises
>+in silicon-chip design, where a part of the chip is not validated. If it isn't
>+validated, it can be assumed not to work, either now or later, so it is best to
>+remove that logic to avoid it causing problems.
>+
>+Setting up
>+----------
>+
>+Binman tests use various utility programs. Most of these are documented in
>+:doc:`../build/gcc`. But some are SoC-specific. To fetch these, tell Binman to
>+fetch or build any missing tools:
>+
>+.. code-block:: bash
>+
>+    $ binman tool -f missing
>+
>+When this completes successfully, you can list the tools. You should see
>+something like this:
>+
>+.. code-block:: bash
>+
>+    $ binman tool -l
>+    Name             Version      Description                Path
>+    ---------------  -----------  -------------------------  ------------------------------
>+    bootgen          ****** Bootg Xilinx Bootgen             /home/sglass/.binman-tools/bootgen
>+    bzip2            1.0.8        bzip2 compression          /usr/bin/bzip2
>+    cbfstool         unknown      Manipulate CBFS files      /home/sglass/bin/cbfstool
>+    fdt_add_pubkey   unknown      Generate image for U-Boot  /home/sglass/bin/fdt_add_pubkey
>+    fdtgrep          unknown      Grep devicetree files      /home/sglass/bin/fdtgrep
>+    fiptool          v2.11.0(rele Manipulate ATF FIP files   /home/sglass/.binman-tools/fiptool
>+    futility         v0.0.1-9f2e9 Chromium OS firmware utili /home/sglass/.binman-tools/futility
>+    gzip             1.12         gzip compression           /usr/bin/gzip
>+    ifwitool         unknown      Manipulate Intel IFWI file /home/sglass/.binman-tools/ifwitool
>+    lz4              v1.9.4       lz4 compression            /usr/bin/lz4
>+    lzma_alone       9.22 beta    lzma_alone compression     /usr/bin/lzma_alone
>+    lzop             v1.04        lzo compression            /usr/bin/lzop
>+    mkeficapsule     2024.10-rc5- mkeficapsule tool for gene /home/sglass/bin/mkeficapsule
>+    mkimage          2024.10-rc5- Generate image for U-Boot  /home/sglass/bin/mkimage
>+    openssl          3.0.13 30 Ja openssl cryptography toolk /usr/bin/openssl
>+    xz               5.4.5        xz compression             /usr/bin/xz
>+    zstd             v1.5.5       zstd compression           /usr/bin/zstd
>+
>+The tools are written to ``~/.binman-tools`` so add that to your ``PATH``.
>+It's fine to have some of the tools elsewhere (e.g. ``~/bin``) so long as they
>+are up-to-date. This allows you use the version of the tools intended for
>+running tests.
>+
>+Now you should be able to actually run the tests:
>+
>+.. code-block:: bash
>+
>+    $ binman test
>+    ======================== Running binman tests ========================
>+    ......................................................................
>+    ......................................................................
>+    ......................................................................
>+    ......................................................................
>+    ......................................................................
>+    ......................................................................
>+    ......................................................................
>+    ......................................................................
>+    ........
>+    ----------------------------------------------------------------------
>+    Ran 568 tests in 2.578s
>+
>+    OK
>+
>+If this doesn't work, see if you can have some missing tools. Check that the
>+dependencies are all there as above. If it is very slow, try installing
>+concurrencytest so that the tests run in parallel.
>+
>+The next thing to set up is code coverage, using the -T flag:
>+
>+.. code-block:: bash
>+
>+    $ binman test -T
>+    ======================== Running binman tests ========================
>+    ......................................................................
>+    ......................................................................
>+    ......................................................................
>+    ......................................................................
>+    ......................................................................
>+    ......................................................................
>+    ......................................................................
>+    ......................................................................
>+    ........
>+    ----------------------------------------------------------------------
>+    Ran 568 tests in 17.367s
>+
>+    OK
>+
>+    99%
>+    Name                                                    Stmts   Miss  Cover
>+    ---------------------------------------------------------------------------
>+    tools/binman/__init__.py                                    0      0   100%
>+    tools/binman/bintool.py                                   263      0   100%
>+    tools/binman/btool/bootgen.py                              21      0   100%
>+    tools/binman/btool/btool_gzip.py                            5      0   100%
>+    tools/binman/btool/bzip2.py                                 5      0   100%
>+    tools/binman/btool/cbfstool.py                             24      0   100%
>+    tools/binman/btool/cst.py                                  15      4    73%
>+    tools/binman/btool/fdt_add_pubkey.py                       21      0   100%
>+    tools/binman/btool/fdtgrep.py                              26      0   100%
>+    tools/binman/btool/fiptool.py                              19      0   100%
>+    tools/binman/btool/futility.py                             19      0   100%
>+    tools/binman/btool/ifwitool.py                             22      0   100%
>+    tools/binman/btool/lz4.py                                  22      0   100%
>+    tools/binman/btool/lzma_alone.py                           34      0   100%
>+    tools/binman/btool/lzop.py                                  5      0   100%
>+    tools/binman/btool/mkeficapsule.py                         27      0   100%
>+    tools/binman/btool/mkimage.py                              23      0   100%
>+    tools/binman/btool/openssl.py                              42      0   100%
>+    tools/binman/btool/xz.py                                    5      0   100%
>+    tools/binman/btool/zstd.py                                  5      0   100%
>+    tools/binman/cbfs_util.py                                 376      0   100%
>+    tools/binman/cmdline.py                                    90      0   100%
>+    tools/binman/control.py                                   409      0   100%
>+    tools/binman/elf.py                                       241      0   100%
>+    tools/binman/entry.py                                     548      0   100%
>+    tools/binman/etype/alternates_fdt.py                       58      0   100%
>+    tools/binman/etype/atf_bl31.py                              5      0   100%
>+    tools/binman/etype/atf_fip.py                              67      0   100%
>+    tools/binman/etype/blob.py                                 49      0   100%
>+    tools/binman/etype/blob_dtb.py                             46      0   100%
>+    tools/binman/etype/blob_ext.py                              9      0   100%
>+    tools/binman/etype/blob_ext_list.py                        32      0   100%
>+    tools/binman/etype/blob_named_by_arg.py                     9      0   100%
>+    tools/binman/etype/blob_phase.py                           22      0   100%
>+    tools/binman/etype/cbfs.py                                101      0   100%
>+    tools/binman/etype/collection.py                           30      0   100%
>+    tools/binman/etype/cros_ec_rw.py                            5      0   100%
>+    tools/binman/etype/efi_capsule.py                          59      0   100%
>+    tools/binman/etype/efi_empty_capsule.py                    33      0   100%
>+    tools/binman/etype/encrypted.py                            34      0   100%
>+    tools/binman/etype/fdtmap.py                               62      0   100%
>+    tools/binman/etype/files.py                                35      0   100%
>+    tools/binman/etype/fill.py                                 13      0   100%
>+    tools/binman/etype/fit.py                                 311      0   100%
>+    tools/binman/etype/fmap.py                                 37      0   100%
>+    tools/binman/etype/gbb.py                                  37      0   100%
>+    tools/binman/etype/image_header.py                         53      0   100%
>+    tools/binman/etype/intel_cmc.py                             4      0   100%
>+    tools/binman/etype/intel_descriptor.py                     39      0   100%
>+    tools/binman/etype/intel_fit.py                            12      0   100%
>+    tools/binman/etype/intel_fit_ptr.py                        17      0   100%
>+    tools/binman/etype/intel_fsp.py                             4      0   100%
>+    tools/binman/etype/intel_fsp_m.py                           4      0   100%
>+    tools/binman/etype/intel_fsp_s.py                           4      0   100%
>+    tools/binman/etype/intel_fsp_t.py                           4      0   100%
>+    tools/binman/etype/intel_ifwi.py                           67      0   100%
>+    tools/binman/etype/intel_me.py                              4      0   100%
>+    tools/binman/etype/intel_mrc.py                             6      0   100%
>+    tools/binman/etype/intel_refcode.py                         6      0   100%
>+    tools/binman/etype/intel_vbt.py                             4      0   100%
>+    tools/binman/etype/intel_vga.py                             4      0   100%
>+    tools/binman/etype/mkimage.py                              84      0   100%
>+    tools/binman/etype/null.py                                  9      0   100%
>+    tools/binman/etype/nxp_imx8mcst.py                         78     59    24%
>+    tools/binman/etype/nxp_imx8mimage.py                       38      6    84%
>+    tools/binman/etype/opensbi.py                               5      0   100%
>+    tools/binman/etype/powerpc_mpc85xx_bootpg_resetvec.py       6      0   100%
>+    tools/binman/etype/pre_load.py                             76      0   100%
>+    tools/binman/etype/rockchip_tpl.py                          5      0   100%
>+    tools/binman/etype/scp.py                                   5      0   100%
>+    tools/binman/etype/section.py                             418      0   100%
>+    tools/binman/etype/tee_os.py                               31      0   100%
>+    tools/binman/etype/text.py                                 21      0   100%
>+    tools/binman/etype/ti_board_config.py                     139      0   100%
>+    tools/binman/etype/ti_dm.py                                 5      0   100%
>+    tools/binman/etype/ti_secure.py                            65      0   100%
>+    tools/binman/etype/ti_secure_rom.py                       117      0   100%
>+    tools/binman/etype/u_boot.py                                7      0   100%
>+    tools/binman/etype/u_boot_dtb.py                            9      0   100%
>+    tools/binman/etype/u_boot_dtb_with_ucode.py                51      0   100%
>+    tools/binman/etype/u_boot_elf.py                           19      0   100%
>+    tools/binman/etype/u_boot_env.py                           27      0   100%
>+    tools/binman/etype/u_boot_expanded.py                       4      0   100%
>+    tools/binman/etype/u_boot_img.py                            7      0   100%
>+    tools/binman/etype/u_boot_nodtb.py                          7      0   100%
>+    tools/binman/etype/u_boot_spl.py                            8      0   100%
>+    tools/binman/etype/u_boot_spl_bss_pad.py                   14      0   100%
>+    tools/binman/etype/u_boot_spl_dtb.py                        9      0   100%
>+    tools/binman/etype/u_boot_spl_elf.py                        8      0   100%
>+    tools/binman/etype/u_boot_spl_expanded.py                  12      0   100%
>+    tools/binman/etype/u_boot_spl_nodtb.py                      8      0   100%
>+    tools/binman/etype/u_boot_spl_pubkey_dtb.py                32      0   100%
>+    tools/binman/etype/u_boot_spl_with_ucode_ptr.py             8      0   100%
>+    tools/binman/etype/u_boot_tpl.py                            8      0   100%
>+    tools/binman/etype/u_boot_tpl_bss_pad.py                   14      0   100%
>+    tools/binman/etype/u_boot_tpl_dtb.py                        9      0   100%
>+    tools/binman/etype/u_boot_tpl_dtb_with_ucode.py             8      0   100%
>+    tools/binman/etype/u_boot_tpl_elf.py                        8      0   100%
>+    tools/binman/etype/u_boot_tpl_expanded.py                  12      0   100%
>+    tools/binman/etype/u_boot_tpl_nodtb.py                      8      0   100%
>+    tools/binman/etype/u_boot_tpl_with_ucode_ptr.py            12      0   100%
>+    tools/binman/etype/u_boot_ucode.py                         33      0   100%
>+    tools/binman/etype/u_boot_vpl.py                            8      0   100%
>+    tools/binman/etype/u_boot_vpl_bss_pad.py                   14      0   100%
>+    tools/binman/etype/u_boot_vpl_dtb.py                        9      0   100%
>+    tools/binman/etype/u_boot_vpl_elf.py                        8      0   100%
>+    tools/binman/etype/u_boot_vpl_expanded.py                  12      0   100%
>+    tools/binman/etype/u_boot_vpl_nodtb.py                      8      0   100%
>+    tools/binman/etype/u_boot_with_ucode_ptr.py                42      0   100%
>+    tools/binman/etype/vblock.py                               38      0   100%
>+    tools/binman/etype/x86_reset16.py                           7      0   100%
>+    tools/binman/etype/x86_reset16_spl.py                       7      0   100%
>+    tools/binman/etype/x86_reset16_tpl.py                       7      0   100%
>+    tools/binman/etype/x86_start16.py                           7      0   100%
>+    tools/binman/etype/x86_start16_spl.py                       7      0   100%
>+    tools/binman/etype/x86_start16_tpl.py                       7      0   100%
>+    tools/binman/etype/x509_cert.py                            71      0   100%
>+    tools/binman/etype/xilinx_bootgen.py                       72      0   100%
>+    tools/binman/fip_util.py                                  202      0   100%
>+    tools/binman/fmap_util.py                                  49      0   100%
>+    tools/binman/image.py                                     181      0   100%
>+    tools/binman/state.py                                     201      0   100%
>+    ---------------------------------------------------------------------------
>+    TOTAL                                                    5954     69    99%
>+
>+    To get a report in 'htmlcov/index.html', type: python3-coverage html
>+    Coverage error: 99%, but should be 100%
>+    ValueError: Test coverage failure
>+
>+Unfortunately the run failed. As it suggests, create a report:
>+
>+.. code-block:: bash
>+
>+    $ python3-coverage html
>+    Wrote HTML report to htmlcov/index.html
>+
>+If you open that file in the browser, you can see which files are not reaching
>+100% and click on them. Here is ``nxp_imx8mimage.py``, for example:
>+
>+.. code-block:: python
>+
>+    43        # Generate mkimage configuration file similar to imx8mimage.cfg
>+    44        # and pass it to mkimage to generate SPL image for us here.
>+    45        cfg_fname = tools.get_output_filename('nxp.imx8mimage.cfg.%s' % uniq)
>+    46        with open(cfg_fname, 'w') as outf:
>+    47            print('ROM_VERSION v%d' % self.rom_version, file=outf)
>+    48            print('BOOT_FROM %s' % self.boot_from, file=outf)
>+    49            print('LOADER %s %#x' % (input_fname, self.loader_address), file=outf)
>+    50
>+    51        output_fname = tools.get_output_filename(f'cfg-out.{uniq}')
>+    52        args = ['-d', input_fname, '-n', cfg_fname, '-T', 'imx8mimage',
>+    53                output_fname]
>+    54        if self.mkimage.run_cmd(*args) is not None:
>+    55            return tools.read_file(output_fname)
>+    56        else:
>+    57            # Bintool is missing; just use the input data as the output
>+    58 x          self.record_missing_bintool(self.mkimage)
>+    59 x          return data
>+    60
>+    61    def SetImagePos(self, image_pos):
>+    62        # Customized SoC specific SetImagePos which skips the mkimage etype
>+    63        # implementation and removes the 0x48 offset introduced there. That
>+    64        # offset is only used for uImage/fitImage, which is not the case in
>+    65        # here.
>+    66        upto = 0x00
>+    67        for entry in super().GetEntries().values():
>+    68 x          entry.SetOffsetSize(upto, None)
>+    69
>+    70            # Give up if any entries lack a size
>+    71 x          if entry.size is None:
>+    72 x              return
>+    73 x          upto += entry.size
>+    74
>+    75        Entry_section.SetImagePos(self, image_pos)
>+
>+Most of the file is covered, but the lines marked with ``x`` indicate missing
>+coverage. The will show up red in your browser.
>+
>+What is a test?
>+---------------
>+
>+A test is a function in ``ftest.py`` which uses an image description in
>+``tools/binman/test`` to perform some operations and exercise the code. Some
>+tests are just a few lines; some are more complicated.
>+
>+Here is a simple test:
>+
>+.. code-block:: python
>+
>+    def testSimple(self):
>+        """Test a simple binman with a single file"""
>+        data = self._DoReadFile('005_simple.dts')
>+        self.assertEqual(U_BOOT_DATA, data)
>+
>+This test tells Binman to build an image using the description. Then it checks
>+that the resulting image looks correct. The image description is:
>+
>+.. code-block:: devicetree
>+
>+    /dts-v1/;
>+
>+    / {
>+        #address-cells = <1>;
>+        #size-cells = <1>;
>+
>+        binman {
>+            u-boot {
>+            };
>+        };
>+    };
>+
>+As you will know from the Binman documentation, this says that there is
>+one image and it contains the U-Boot binary. So this test builds an image
>+consisting of a U-Boot binary, then checks that it does indeed have just a
>+U-Boot binary in it.
>+
>+Test data
>+---------
>+
>+Using real binaries (like ``u-boot.bin``) to test Binman would be quite tedious.
>+Every output file would be large and it would be hard to tell by looking at the
>+output (e.g. with a hex dump) if a particular entry contains ``u-boot.bin`` or
>+``u-boot-spl.bin`` or something else.
>+
>+Binman gets around this by using simple placeholders. Here is the placeholder
>+for u-boot.bin:
>+
>+.. code-block:: python
>+
>+    U_BOOT_DATA           = b'1234'
>+
>+This is just bytes. So the test above checks that the output image contains
>+these four bytes. This makes verification fast for Binman and very easy for
>+humans.
>+
>+Even the devicetree is a placeholder:
>+
>+.. code-block:: python
>+
>+    U_BOOT_DTB_DATA       = b'udtb'
>+
>+But for some tests you need to use the real devicetree. In that case you can
>+use ``_DoReadFileRealDtb()``. See ``testUpdateFdtAll()`` for an example of how
>+to check the devicetree updated by Binman.
>+
>+Test structure
>+--------------
>+
>+Each test is designed to test just one thing. Binman tests are named according
>+to what they are testing. Individually they don't do very much, but as a whole
>+they test every line of code in Binman.
>+
>+So ``testSimple()`` is designed to check that Binman can build the
>+simplest-possible image that isn't completely empty.
>+
>+Another type of test is one which checks error-handling, for example:
>+
>+.. code-block:: python
>+
>+    def testFillNoSize(self):
>+        """Test for an fill entry type with no size"""
>+        with self.assertRaises(ValueError) as e:
>+            self._DoReadFile('070_fill_no_size.dts')
>+        self.assertIn("'fill' entry is missing properties: size",
>+                      str(e.exception))
>+
>+This test deliberately tries to provoke an error. The image description is:
>+
>+.. code-block:: devicetree
>+
>+    // SPDX-License-Identifier: GPL-2.0+
>+    /dts-v1/;
>+
>+    / {
>+        #address-cells = <1>;
>+        #size-cells = <1>;
>+
>+        binman {
>+            size = <16>;
>+            fill {
>+                fill-byte = [ff];
>+            };
>+        };
>+    };
>+
>+You can see that there is no size for the 'fill' entry, so we would expect
>+Binman to complain. The test checks that it actually does. It also checks the
>+error message produced by Binman. Sometimes you need to add several tests, each
>+with their own broken image description, in order to check all the error cases.
>+
>+Sometimes you need to capture the console output of Binman, to check it is
>+correct. You can to this with ``test_util.capture_sys_output()``, for example:
>+
>+.. code-block:: python
>+
>+    with test_util.capture_sys_output() as (_, stderr):
>+        self._DoTestFile('071_gbb.dts', force_missing_bintools='futility',
>+                         entry_args=entry_args)
>+    err = stderr.getvalue()
>+    self.assertRegex(err, "Image 'image'.*missing bintools.*: futility")
>+
>+The test collects the output and checks it with a regular expression. If you
>+need to see the test output (e.g. to debug it), you will have to remove that
>+capture line.
>+
>+How to add a new test
>+---------------------
>+
>+This section explains the process of writing a new test. It uses an example to
>+help with this, but your code will be different.
>+
>+Generally you are adding a test because you are adding a new entry type
>+('etype'). So start by creating the shortest and simplest image-description you
>+can, which contains the new etype. Put it in a numbered file in
>+``tool/binman/test`` so that it comes last. All the numbers are unique and there
>+are no gaps.
>+
>+Example from ``tools/binman/test/339_nxp_imx8.dts``:
>+
>+.. code-block:: devicetree
>+
>+    // SPDX-License-Identifier: GPL-2.0+
>+
>+    /dts-v1/;
>+
>+    / {
>+        #address-cells = <1>;
>+        #size-cells = <1>;
>+
>+        binman {
>+            nxp-imx8mimage {
>+                args;    /* TODO: Needed by mkimage etype superclass */
>+                nxp,boot-from = "sd";
>+                nxp,rom-version = <1>;
>+                nxp,loader-address = <0x10>;
>+            };
>+        };
>+    };
>+
>+Note that you should use tabs in the file, not spaces. You can see that this has
>+been cut down to the bare minimum, just enough to include the etype and the
>+arguments it needs. This is of course not a real image. It will not boot on
>+anything. But that's fine; we are just trying to test this one etype. Try not
>+to add any other sections and etypes unless they are absolutely essential for
>+your test to work. This helps others too: they don't need to understand the full
>+complexity of your etype just to read your test.
>+
>+Then create your test by adding a new function at the end of ``ftest.py``:
>+
>+.. code-block:: python
>+
>+    def testNxpImx8Image(self):
>+        """Test that binman can produce an iMX8 image"""
>+        self._DoTestFile('339_nxp_imx8.dts')
>+
>+This uses the test file that you created. It doesn't check anything, it just
>+runs the image description through binman.
>+
>+Let's run it:
>+
>+.. code-block:: bash
>+
>+    $ binman test testNxpImx8Image
>+    ======================== Running binman tests ========================
>+    .
>+    ----------------------------------------------------------------------
>+    Ran 1 test in 0.242s
>+
>+    OK
>+
>+So the test passes. It doesn't really do a lot, but it does exercise the etype.
>+The next step is to update it to actually check the output:
>+
>+.. code-block:: python
>+
>+    def testNxpImx8Image(self):
>+        """Test that binman can produce an iMX8 image"""
>+        data = self._DoReadFile('339_nxp_imx8.dts')
>+        print('data', len(data))
>+
>+The ``_DoReadFile()`` function is documented in the code. It returns the image
>+contents as the first part of a tuple.
>+
>+Running this we see:
>+
>+.. code-block:: bash
>+
>+    data 2200
>+
>+So it is producing a little over 8K of data. Your etype will be different, but
>+in any case you can add Python code to check that this data is actually correct,
>+based on your knowledge of your etype. Note that you should not be checking
>+whether the external tools (called 'bintools' in Binman) are actually working,
>+since presumably they have their own tests. You just need to check that the
>+image seems reasonable, e.g. is not empty, contains the expected sections, etc.
>+
>+When your etype does use a bintool, it also needs tests, but generally it will
>+be tested by virtue of the etype test. This is because your etype must call the
>+bintool to create the image. Sometimes you might need to add a test for a
>+bintool error-condition, though.
>+
>+Finishing code coverage
>+-----------------------
>+
>+The objective is to have test-coverage for every line of code that you add to
>+Binman. So how can you tell? First, get a coverage report as described above.
>+Look through the output for any files which are not at 100%. Add more test cases
>+(image descriptions and new functions in ``ftest.py``) until you have covered
>+each line.
>+
>+In the above example, here are some possible steps:
>+
>+#. The first red bit is where the ``mkimage`` call returns None. This can be
>+   traced to ``Bintoolmkimage.mkimage()`` which calls
>+   ``Bintool.run_cmd_result()`` and ``None`` means that ``mkimage`` is missing.
>+   So the etype has code to handle that case, but it is never used. You can
>+   look for other examples of ``self.mkimage`` returning ``None`` - e.g.
>+   ``Entry_mkimage.BuildSectionData()`` does this. The clue for finding this is
>+   that the ``nxp-imx8mimage`` etype is based on ``Entry_mkimage``:
>+
>+   .. code-block:: python
>+
>+       class Entry_nxp_imx8mimage(Entry_mkimage):
>+
>+   It must be tested somewhere...in this case ``testMkimage()`` doesn't do it,
>+   but ``testMkimageMissing()`` immediately below that does. So you can create a
>+   similar test, e.g.:
>+
>+   .. code-block:: python
>+
>+       def testNxpImx8ImageMkimageMissing(self):
>+           """Test that binman can produce an iMX8 image"""
>+           with test_util.capture_sys_output() as (_, stderr):
>+               self._DoTestFile('339_nxp_imx8.dts',
>+                                force_missing_bintools='mkimage')
>+           err = stderr.getvalue()
>+           self.assertRegex(err, "Image 'image'.*missing bintools.*: mkimage")
>+
>+   Note that this uses exactly the same image description as the first test.
>+   It just checks what happens when the tool is missing. Checking the coverage
>+   again, you will see that the first red bit has gone:
>+
>+   .. code-block:: bash
>+
>+       $ binman test -T
>+       $ python3-coverage html
>+
>+#. The second red bit is for ``SetImagePos()``. You can see that it is iterating
>+   through the sub-entries inside the ``nxp-imx8mimage`` entry. In the case of
>+   the 339 file, there are no such entries, so this code inside the for() loop
>+   isn't used:
>+
>+   .. code-block:: python
>+
>+       def SetImagePos(self, image_pos):
>+        # Customized SoC specific SetImagePos which skips the mkimage etype
>+        # implementation and removes the 0x48 offset introduced there. That
>+        # offset is only used for uImage/fitImage, which is not the case in
>+        # here.
>+        upto = 0x00
>+        for entry in super().GetEntries().values():
>+            entry.SetOffsetSize(upto, None)
>+
>+            # Give up if any entries lack a size
>+            if entry.size is None:
>+                return
>+            upto += entry.size
>+
>+        Entry_section.SetImagePos(self, image_pos)
>+
>+   The solution is to add an entry, e.g. in ``340_nxp_imx8_non_empty.dts``:
>+
>+   .. code-block:: devicetree
>+
>+       // SPDX-License-Identifier: GPL-2.0+
>+
>+       /dts-v1/;
>+
>+       / {
>+           #address-cells = <1>;
>+           #size-cells = <1>;
>+
>+           binman {
>+               nxp-imx8mimage {
>+                   args;    /* TODO: Needed by mkimage etype superclass */
>+                   nxp,boot-from = "sd";
>+                   nxp,rom-version = <1>;
>+                   nxp,loader-address = <0x10>;
>+
>+                   u-boot {
>+                   };
>+               };
>+           };
>+       };
>+
>+   Now write a little test to use it:
>+
>+   .. code-block:: python
>+
>+       def testNxpImx8ImageNonEmpty(self):
>+           """Test that binman can produce an iMX8 image with something in it"""
>+            data = self._DoReadFile('340_nxp_imx8_non_empty.dts')
>+            # check data here
>+
>+   With that, the second red bit goes away, because the for() loop is now used.
>+
>+#. There is one more red bit left, the ``return`` in ``SetImagePos()``. The
>+   above effort got the for() loop to be executed, but it doesn't cover the
>+   ``return``. It might have been copied from some other etype, e.g. the mkimage
>+   one. See ``Entry_mkimage.SetImagePos()`` which contains the code:
>+
>+   .. code-block:: python
>+
>+       for entry in self.GetEntries().values():
>+           entry.SetOffsetSize(upto, None)
>+
>+           # Give up if any entries lack a size
>+           if entry.size is None:
>+               return
>+           upto += entry.size
>+
>+   But which test covers that code for mkimage? By figuring that out, you could
>+   use a similar technique. One way to find out is to delete the two lines in
>+   ``Entry_mkimage`` which check for entry.size being None and returning, then
>+   see what breaks with ``binman test``:
>+
>+   .. code-block:: bash
>+
>+       ERROR: binman.ftest.TestFunctional.testMkimageCollection (subunit.RemotedTestCase)
>+       binman.ftest.TestFunctional.testMkimageCollection
>+       ----------------------------------------------------------------------
>+       testtools.testresult.real._StringException: Traceback (most recent call last):
>+       TypeError: unsupported operand type(s) for +=: 'int' and 'NoneType'
>+
>+       ======================================================================
>+       ERROR: binman.ftest.TestFunctional.testMkimageImage (subunit.RemotedTestCase)
>+       binman.ftest.TestFunctional.testMkimageImage
>+       ----------------------------------------------------------------------
>+       testtools.testresult.real._StringException: Traceback (most recent call last):
>+       TypeError: unsupported operand type(s) for +=: 'int' and 'NoneType'
>+
>+       ======================================================================
>+       ERROR: binman.ftest.TestFunctional.testMkimageSpecial (subunit.RemotedTestCase)
>+       binman.ftest.TestFunctional.testMkimageSpecial
>+       ----------------------------------------------------------------------
>+       testtools.testresult.real._StringException: Traceback (most recent call last):
>+       TypeError: unsupported operand type(s) for +=: 'int' and 'NoneType'
>+
>+   We can verify that you got the right test, by putting the lines back in and
>+   getting coverage for just that test:
>+
>+   .. code-block:: bash
>+
>+       binman test -T testMkimageCollection
>+       python3-coverage html
>+
>+   You will see a lot of red since we are seeing test coverage just for one
>+   test, but if you look in ``mkimage.py`` at ``SetImagePos()`` you will see
>+   that the ``return`` is covered (i.e. it is marked green).
>+
>+   Looking at the ``.dts`` files for each of these tests, none jumps out as
>+   being relevant to our case. It seems that this code just isn't needed, so the
>+   best solution is to delete those two lines from the function:
>+
>+   .. code-block:: python
>+
>+       def SetImagePos(self, image_pos):
>+           # Customized SoC specific SetImagePos which skips the mkimage etype
>+           # implementation and removes the 0x48 offset introduced there. That
>+           # offset is only used for uImage/fitImage, which is not the case in
>+           # here.
>+           upto = 0x00
>+           for entry in super().GetEntries().values():
>+               entry.SetOffsetSize(upto, None)
>+               upto += entry.size
>+
>+           Entry_section.SetImagePos(self, image_pos)
>+
>+We should check the updated code on a real build, to make sure it really
>+isn't needed, of course.
>+
>+Now, the test coverage is complete!
>+
>+If we later discover a case where those lines are needed, we can add the
>+lines back, along with a test for this case.
>+
>+Getting help
>+------------
>+
>+If you are stuck and cannot work out how to add test coverage for your entry
>+type, ask on the U-Boot mailing list, cc ``Simon Glass <sjg@chromium.org>`` or
>+on irc ``sjg1``
>diff --git a/doc/develop/index.rst b/doc/develop/index.rst
>index 0d0e60ab56c..e75169ef14c 100644
>--- a/doc/develop/index.rst
>+++ b/doc/develop/index.rst
>@@ -81,6 +81,7 @@ Testing
>    py_testing
>    tests_writing
>    tests_sandbox
>+   binman_tests
> 
> Refactoring
> -----------
>diff --git a/tools/binman/binman.rst b/tools/binman/binman.rst
>index c25914312a8..381e55686f9 100644
>--- a/tools/binman/binman.rst
>+++ b/tools/binman/binman.rst
>@@ -2194,6 +2194,11 @@ Use '-P 1' to disable this. It is automatically disabled when code coverage is
> being used (-T) since they are incompatible.
> 
> 
>+Writing tests
>+-------------
>+
>+See :doc:`../binman_tests`.
>+
> Debugging tests
> ---------------
> 

^ permalink raw reply	[flat|nested] 8+ messages in thread

* Re: [PATCH 3/3] binman: Add a tutorial on resolving test-coverage bugs
  2024-09-30 18:51 ` [PATCH 3/3] binman: Add a tutorial on resolving test-coverage bugs Simon Glass
  2024-09-30 20:30   ` Heinrich Schuchardt
@ 2024-10-08 13:13   ` Mattijs Korpershoek
  2024-10-17 23:11     ` Simon Glass
  1 sibling, 1 reply; 8+ messages in thread
From: Mattijs Korpershoek @ 2024-10-08 13:13 UTC (permalink / raw)
  To: Simon Glass, U-Boot Mailing List
  Cc: Tom Rini, Brian Ruley, Marek Vasut, Simon Glass, Alexander Dahl,
	Alper Nebi Yasak, Caleb Connolly, Dario Binacchi,
	Heinrich Schuchardt, Joao Marcos Costa, Neha Malcom Francis,
	Neil Armstrong, Peng Fan, Philippe Reynes, Robert Marko,
	Sam Protsenko, Stefan Herbrechtsmeier, Sumit Garg

Hi Simon,

Thank you for the patch.

It's really great to have this documented.
I found a couple of small typos, hope that helps.

On lun., sept. 30, 2024 at 12:51, Simon Glass <sjg@chromium.org> wrote:

> Provide a short description of how tests work, why they are so critical
> and how to resolve gaps in Binman's test coverage.
>
> Signed-off-by: Simon Glass <sjg@chromium.org>
> ---
>
>  MAINTAINERS                  |   1 +
>  doc/develop/binman_tests.rst | 734 +++++++++++++++++++++++++++++++++++
>  doc/develop/index.rst        |   1 +
>  tools/binman/binman.rst      |   5 +
>  4 files changed, 741 insertions(+)
>  create mode 100644 doc/develop/binman_tests.rst
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 7ab39d91a55..65a9ea1face 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -909,6 +909,7 @@ BINMAN
>  M:	Simon Glass <sjg@chromium.org>
>  M:	Alper Nebi Yasak <alpernebiyasak@gmail.com>
>  S:	Maintained
> +F:	doc/develop/binman_tests.rst
>  F:	tools/binman/
>  
>  BLKMAP
> diff --git a/doc/develop/binman_tests.rst b/doc/develop/binman_tests.rst
> new file mode 100644
> index 00000000000..a632694a6fe
> --- /dev/null
> +++ b/doc/develop/binman_tests.rst
> @@ -0,0 +1,734 @@
> +.. SPDX-License-Identifier: GPL-2.0+
> +
> +.. toctree::
> +   :maxdepth: 1
> +
> +Binman Tests
> +============
> +
> +.. contents::
> +   :depth: 2
> +   :local:
> +
> +There is some material on writing tests in the main Binman documentation
> +(see :doc:`package/index`). This short guide is separate so people don't
> +feel they have to read as much.
> +
> +Code and output is mostly included verbatim, which makes the doc longer, but
> +avoids its becoming confusing when the output or referenced code changes in the
> +future.
> +
> +Purpose
> +-------
> +
> +The main purpose of tests in Binman is to make sure that Binman actually does
> +what it is supposed to. Various people contribute code, refactoring is done
> +over time, but U-Boot users (developers, SoC vendors, board vendors) rely on
> +Binman producing images which function correctly. Without tests, a one-line
> +change could unintentionally break a corner-case and the problem might not be
> +noticed for months. Debugging an image-generation problem with a board you
> +don't have can be very hard.
> +
> +A secondary purpose is productivity. U-Boot contributors are busy and often
> +have too much on their plate. Trying to figure out why their patch broke
> +some other vendor's workflow can be very time-consuming and frustrating. By
> +building in tests from the start, this is largely avoided. If your change has
> +full test coverage and doesn't break any test, all is well and no one can
> +complain.
> +
> +A lessor purpose is to document what Binman actually does. If a test covers a

Lessor? I think this should be lesser ?

> +feature, it works. If there is no test coverage, no one can say for sure
> +whether it works in all expected situations, certainly not wihout manual

s/wihout/without

> +effort.
> +
> +In fact, strictly speaking it isn't completely clear what 'works' even means in
> +the case where these is no test to cover the code. We are often left guessing

s/these/there

> +as to what the documentation means, what was actually intended, etc.
> +
> +Finally, code-coverage helps to remove 'zombie code', copied from elsewhere
> +because it looks reasonable, but not actually needed. The same situation arises
> +in silicon-chip design, where a part of the chip is not validated. If it isn't
> +validated, it can be assumed not to work, either now or later, so it is best to
> +remove that logic to avoid it causing problems.
> +
> +Setting up
> +----------
> +
> +Binman tests use various utility programs. Most of these are documented in
> +:doc:`../build/gcc`. But some are SoC-specific. To fetch these, tell Binman to
> +fetch or build any missing tools:
> +
> +.. code-block:: bash
> +
> +    $ binman tool -f missing
> +
> +When this completes successfully, you can list the tools. You should see
> +something like this:
> +
> +.. code-block:: bash
> +
> +    $ binman tool -l
> +    Name             Version      Description                Path
> +    ---------------  -----------  -------------------------  ------------------------------
> +    bootgen          ****** Bootg Xilinx Bootgen             /home/sglass/.binman-tools/bootgen
> +    bzip2            1.0.8        bzip2 compression          /usr/bin/bzip2
> +    cbfstool         unknown      Manipulate CBFS files      /home/sglass/bin/cbfstool
> +    fdt_add_pubkey   unknown      Generate image for U-Boot  /home/sglass/bin/fdt_add_pubkey
> +    fdtgrep          unknown      Grep devicetree files      /home/sglass/bin/fdtgrep
> +    fiptool          v2.11.0(rele Manipulate ATF FIP files   /home/sglass/.binman-tools/fiptool
> +    futility         v0.0.1-9f2e9 Chromium OS firmware utili /home/sglass/.binman-tools/futility
> +    gzip             1.12         gzip compression           /usr/bin/gzip
> +    ifwitool         unknown      Manipulate Intel IFWI file /home/sglass/.binman-tools/ifwitool
> +    lz4              v1.9.4       lz4 compression            /usr/bin/lz4
> +    lzma_alone       9.22 beta    lzma_alone compression     /usr/bin/lzma_alone
> +    lzop             v1.04        lzo compression            /usr/bin/lzop
> +    mkeficapsule     2024.10-rc5- mkeficapsule tool for gene /home/sglass/bin/mkeficapsule
> +    mkimage          2024.10-rc5- Generate image for U-Boot  /home/sglass/bin/mkimage
> +    openssl          3.0.13 30 Ja openssl cryptography toolk /usr/bin/openssl
> +    xz               5.4.5        xz compression             /usr/bin/xz
> +    zstd             v1.5.5       zstd compression           /usr/bin/zstd
> +
> +The tools are written to ``~/.binman-tools`` so add that to your ``PATH``.
> +It's fine to have some of the tools elsewhere (e.g. ``~/bin``) so long as they
> +are up-to-date. This allows you use the version of the tools intended for
> +running tests.
> +
> +Now you should be able to actually run the tests:
> +
> +.. code-block:: bash
> +
> +    $ binman test
> +    ======================== Running binman tests ========================
> +    ......................................................................
> +    ......................................................................
> +    ......................................................................
> +    ......................................................................
> +    ......................................................................
> +    ......................................................................
> +    ......................................................................
> +    ......................................................................
> +    ........
> +    ----------------------------------------------------------------------
> +    Ran 568 tests in 2.578s
> +
> +    OK
> +
> +If this doesn't work, see if you can have some missing tools. Check that the
> +dependencies are all there as above. If it is very slow, try installing
> +concurrencytest so that the tests run in parallel.
> +
> +The next thing to set up is code coverage, using the -T flag:
> +
> +.. code-block:: bash
> +
> +    $ binman test -T
> +    ======================== Running binman tests ========================
> +    ......................................................................
> +    ......................................................................
> +    ......................................................................
> +    ......................................................................
> +    ......................................................................
> +    ......................................................................
> +    ......................................................................
> +    ......................................................................
> +    ........
> +    ----------------------------------------------------------------------
> +    Ran 568 tests in 17.367s
> +
> +    OK
> +
> +    99%
> +    Name                                                    Stmts   Miss  Cover
> +    ---------------------------------------------------------------------------
> +    tools/binman/__init__.py                                    0      0   100%
> +    tools/binman/bintool.py                                   263      0   100%
> +    tools/binman/btool/bootgen.py                              21      0   100%
> +    tools/binman/btool/btool_gzip.py                            5      0   100%
> +    tools/binman/btool/bzip2.py                                 5      0   100%
> +    tools/binman/btool/cbfstool.py                             24      0   100%
> +    tools/binman/btool/cst.py                                  15      4    73%
> +    tools/binman/btool/fdt_add_pubkey.py                       21      0   100%
> +    tools/binman/btool/fdtgrep.py                              26      0   100%
> +    tools/binman/btool/fiptool.py                              19      0   100%
> +    tools/binman/btool/futility.py                             19      0   100%
> +    tools/binman/btool/ifwitool.py                             22      0   100%
> +    tools/binman/btool/lz4.py                                  22      0   100%
> +    tools/binman/btool/lzma_alone.py                           34      0   100%
> +    tools/binman/btool/lzop.py                                  5      0   100%
> +    tools/binman/btool/mkeficapsule.py                         27      0   100%
> +    tools/binman/btool/mkimage.py                              23      0   100%
> +    tools/binman/btool/openssl.py                              42      0   100%
> +    tools/binman/btool/xz.py                                    5      0   100%
> +    tools/binman/btool/zstd.py                                  5      0   100%
> +    tools/binman/cbfs_util.py                                 376      0   100%
> +    tools/binman/cmdline.py                                    90      0   100%
> +    tools/binman/control.py                                   409      0   100%
> +    tools/binman/elf.py                                       241      0   100%
> +    tools/binman/entry.py                                     548      0   100%
> +    tools/binman/etype/alternates_fdt.py                       58      0   100%
> +    tools/binman/etype/atf_bl31.py                              5      0   100%
> +    tools/binman/etype/atf_fip.py                              67      0   100%
> +    tools/binman/etype/blob.py                                 49      0   100%
> +    tools/binman/etype/blob_dtb.py                             46      0   100%
> +    tools/binman/etype/blob_ext.py                              9      0   100%
> +    tools/binman/etype/blob_ext_list.py                        32      0   100%
> +    tools/binman/etype/blob_named_by_arg.py                     9      0   100%
> +    tools/binman/etype/blob_phase.py                           22      0   100%
> +    tools/binman/etype/cbfs.py                                101      0   100%
> +    tools/binman/etype/collection.py                           30      0   100%
> +    tools/binman/etype/cros_ec_rw.py                            5      0   100%
> +    tools/binman/etype/efi_capsule.py                          59      0   100%
> +    tools/binman/etype/efi_empty_capsule.py                    33      0   100%
> +    tools/binman/etype/encrypted.py                            34      0   100%
> +    tools/binman/etype/fdtmap.py                               62      0   100%
> +    tools/binman/etype/files.py                                35      0   100%
> +    tools/binman/etype/fill.py                                 13      0   100%
> +    tools/binman/etype/fit.py                                 311      0   100%
> +    tools/binman/etype/fmap.py                                 37      0   100%
> +    tools/binman/etype/gbb.py                                  37      0   100%
> +    tools/binman/etype/image_header.py                         53      0   100%
> +    tools/binman/etype/intel_cmc.py                             4      0   100%
> +    tools/binman/etype/intel_descriptor.py                     39      0   100%
> +    tools/binman/etype/intel_fit.py                            12      0   100%
> +    tools/binman/etype/intel_fit_ptr.py                        17      0   100%
> +    tools/binman/etype/intel_fsp.py                             4      0   100%
> +    tools/binman/etype/intel_fsp_m.py                           4      0   100%
> +    tools/binman/etype/intel_fsp_s.py                           4      0   100%
> +    tools/binman/etype/intel_fsp_t.py                           4      0   100%
> +    tools/binman/etype/intel_ifwi.py                           67      0   100%
> +    tools/binman/etype/intel_me.py                              4      0   100%
> +    tools/binman/etype/intel_mrc.py                             6      0   100%
> +    tools/binman/etype/intel_refcode.py                         6      0   100%
> +    tools/binman/etype/intel_vbt.py                             4      0   100%
> +    tools/binman/etype/intel_vga.py                             4      0   100%
> +    tools/binman/etype/mkimage.py                              84      0   100%
> +    tools/binman/etype/null.py                                  9      0   100%
> +    tools/binman/etype/nxp_imx8mcst.py                         78     59    24%
> +    tools/binman/etype/nxp_imx8mimage.py                       38      6    84%
> +    tools/binman/etype/opensbi.py                               5      0   100%
> +    tools/binman/etype/powerpc_mpc85xx_bootpg_resetvec.py       6      0   100%
> +    tools/binman/etype/pre_load.py                             76      0   100%
> +    tools/binman/etype/rockchip_tpl.py                          5      0   100%
> +    tools/binman/etype/scp.py                                   5      0   100%
> +    tools/binman/etype/section.py                             418      0   100%
> +    tools/binman/etype/tee_os.py                               31      0   100%
> +    tools/binman/etype/text.py                                 21      0   100%
> +    tools/binman/etype/ti_board_config.py                     139      0   100%
> +    tools/binman/etype/ti_dm.py                                 5      0   100%
> +    tools/binman/etype/ti_secure.py                            65      0   100%
> +    tools/binman/etype/ti_secure_rom.py                       117      0   100%
> +    tools/binman/etype/u_boot.py                                7      0   100%
> +    tools/binman/etype/u_boot_dtb.py                            9      0   100%
> +    tools/binman/etype/u_boot_dtb_with_ucode.py                51      0   100%
> +    tools/binman/etype/u_boot_elf.py                           19      0   100%
> +    tools/binman/etype/u_boot_env.py                           27      0   100%
> +    tools/binman/etype/u_boot_expanded.py                       4      0   100%
> +    tools/binman/etype/u_boot_img.py                            7      0   100%
> +    tools/binman/etype/u_boot_nodtb.py                          7      0   100%
> +    tools/binman/etype/u_boot_spl.py                            8      0   100%
> +    tools/binman/etype/u_boot_spl_bss_pad.py                   14      0   100%
> +    tools/binman/etype/u_boot_spl_dtb.py                        9      0   100%
> +    tools/binman/etype/u_boot_spl_elf.py                        8      0   100%
> +    tools/binman/etype/u_boot_spl_expanded.py                  12      0   100%
> +    tools/binman/etype/u_boot_spl_nodtb.py                      8      0   100%
> +    tools/binman/etype/u_boot_spl_pubkey_dtb.py                32      0   100%
> +    tools/binman/etype/u_boot_spl_with_ucode_ptr.py             8      0   100%
> +    tools/binman/etype/u_boot_tpl.py                            8      0   100%
> +    tools/binman/etype/u_boot_tpl_bss_pad.py                   14      0   100%
> +    tools/binman/etype/u_boot_tpl_dtb.py                        9      0   100%
> +    tools/binman/etype/u_boot_tpl_dtb_with_ucode.py             8      0   100%
> +    tools/binman/etype/u_boot_tpl_elf.py                        8      0   100%
> +    tools/binman/etype/u_boot_tpl_expanded.py                  12      0   100%
> +    tools/binman/etype/u_boot_tpl_nodtb.py                      8      0   100%
> +    tools/binman/etype/u_boot_tpl_with_ucode_ptr.py            12      0   100%
> +    tools/binman/etype/u_boot_ucode.py                         33      0   100%
> +    tools/binman/etype/u_boot_vpl.py                            8      0   100%
> +    tools/binman/etype/u_boot_vpl_bss_pad.py                   14      0   100%
> +    tools/binman/etype/u_boot_vpl_dtb.py                        9      0   100%
> +    tools/binman/etype/u_boot_vpl_elf.py                        8      0   100%
> +    tools/binman/etype/u_boot_vpl_expanded.py                  12      0   100%
> +    tools/binman/etype/u_boot_vpl_nodtb.py                      8      0   100%
> +    tools/binman/etype/u_boot_with_ucode_ptr.py                42      0   100%
> +    tools/binman/etype/vblock.py                               38      0   100%
> +    tools/binman/etype/x86_reset16.py                           7      0   100%
> +    tools/binman/etype/x86_reset16_spl.py                       7      0   100%
> +    tools/binman/etype/x86_reset16_tpl.py                       7      0   100%
> +    tools/binman/etype/x86_start16.py                           7      0   100%
> +    tools/binman/etype/x86_start16_spl.py                       7      0   100%
> +    tools/binman/etype/x86_start16_tpl.py                       7      0   100%
> +    tools/binman/etype/x509_cert.py                            71      0   100%
> +    tools/binman/etype/xilinx_bootgen.py                       72      0   100%
> +    tools/binman/fip_util.py                                  202      0   100%
> +    tools/binman/fmap_util.py                                  49      0   100%
> +    tools/binman/image.py                                     181      0   100%
> +    tools/binman/state.py                                     201      0   100%
> +    ---------------------------------------------------------------------------
> +    TOTAL                                                    5954     69    99%
> +
> +    To get a report in 'htmlcov/index.html', type: python3-coverage html
> +    Coverage error: 99%, but should be 100%
> +    ValueError: Test coverage failure
> +
> +Unfortunately the run failed. As it suggests, create a report:
> +
> +.. code-block:: bash
> +
> +    $ python3-coverage html
> +    Wrote HTML report to htmlcov/index.html
> +
> +If you open that file in the browser, you can see which files are not reaching
> +100% and click on them. Here is ``nxp_imx8mimage.py``, for example:
> +
> +.. code-block:: python
> +
> +    43        # Generate mkimage configuration file similar to imx8mimage.cfg
> +    44        # and pass it to mkimage to generate SPL image for us here.
> +    45        cfg_fname = tools.get_output_filename('nxp.imx8mimage.cfg.%s' % uniq)
> +    46        with open(cfg_fname, 'w') as outf:
> +    47            print('ROM_VERSION v%d' % self.rom_version, file=outf)
> +    48            print('BOOT_FROM %s' % self.boot_from, file=outf)
> +    49            print('LOADER %s %#x' % (input_fname, self.loader_address), file=outf)
> +    50
> +    51        output_fname = tools.get_output_filename(f'cfg-out.{uniq}')
> +    52        args = ['-d', input_fname, '-n', cfg_fname, '-T', 'imx8mimage',
> +    53                output_fname]
> +    54        if self.mkimage.run_cmd(*args) is not None:
> +    55            return tools.read_file(output_fname)
> +    56        else:
> +    57            # Bintool is missing; just use the input data as the output
> +    58 x          self.record_missing_bintool(self.mkimage)
> +    59 x          return data
> +    60
> +    61    def SetImagePos(self, image_pos):
> +    62        # Customized SoC specific SetImagePos which skips the mkimage etype
> +    63        # implementation and removes the 0x48 offset introduced there. That
> +    64        # offset is only used for uImage/fitImage, which is not the case in
> +    65        # here.
> +    66        upto = 0x00
> +    67        for entry in super().GetEntries().values():
> +    68 x          entry.SetOffsetSize(upto, None)
> +    69
> +    70            # Give up if any entries lack a size
> +    71 x          if entry.size is None:
> +    72 x              return
> +    73 x          upto += entry.size
> +    74
> +    75        Entry_section.SetImagePos(self, image_pos)
> +
> +Most of the file is covered, but the lines marked with ``x`` indicate missing
> +coverage. The will show up red in your browser.

The what? The line ?


With those addressed, feel free to add:

Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>

> +
> +What is a test?

[...]


^ permalink raw reply	[flat|nested] 8+ messages in thread

* Re: [PATCH 3/3] binman: Add a tutorial on resolving test-coverage bugs
  2024-10-08 13:13   ` Mattijs Korpershoek
@ 2024-10-17 23:11     ` Simon Glass
  0 siblings, 0 replies; 8+ messages in thread
From: Simon Glass @ 2024-10-17 23:11 UTC (permalink / raw)
  To: Mattijs Korpershoek
  Cc: Tom Rini, Brian Ruley, Marek Vasut, Simon Glass, Alexander Dahl,
	Alper Nebi Yasak, Caleb Connolly, Dario Binacchi,
	Heinrich Schuchardt, Joao Marcos Costa, Neha Malcom Francis,
	Neil Armstrong, Peng Fan, Philippe Reynes, Robert Marko,
	Sam Protsenko, Stefan Herbrechtsmeier, Sumit Garg,
	U-Boot Mailing List

Hi Simon,

Thank you for the patch.

It's really great to have this documented.
I found a couple of small typos, hope that helps.

On lun., sept. 30, 2024 at 12:51, Simon Glass <sjg@chromium.org> wrote:

> Provide a short description of how tests work, why they are so critical
> and how to resolve gaps in Binman's test coverage.
>
> Signed-off-by: Simon Glass <sjg@chromium.org>
> ---
>
>  MAINTAINERS                  |   1 +
>  doc/develop/binman_tests.rst | 734 +++++++++++++++++++++++++++++++++++
>  doc/develop/index.rst        |   1 +
>  tools/binman/binman.rst      |   5 +
>  4 files changed, 741 insertions(+)
>  create mode 100644 doc/develop/binman_tests.rst
>
Applied to u-boot-dm, thanks!

^ permalink raw reply	[flat|nested] 8+ messages in thread

* Re: [PATCH 1/3] u_boot_pylib: Support running coverage on selected functions
  2024-09-30 18:51 [PATCH 1/3] u_boot_pylib: Support running coverage on selected functions Simon Glass
  2024-09-30 18:51 ` [PATCH 2/3] binman: Support getting test-coverage on just one test Simon Glass
  2024-09-30 18:51 ` [PATCH 3/3] binman: Add a tutorial on resolving test-coverage bugs Simon Glass
@ 2024-10-17 23:11 ` Simon Glass
  2 siblings, 0 replies; 8+ messages in thread
From: Simon Glass @ 2024-10-17 23:11 UTC (permalink / raw)
  To: Simon Glass; +Cc: Tom Rini, Brian Ruley, Marek Vasut, U-Boot Mailing List

At present run_test_coverage() assumes you want code coverage for the
entire code base. This is the normal situation, but sometimes it is
useful to see the coverage provided by just a single test. Add support
for this.

Signed-off-by: Simon Glass <sjg@chromium.org>
---

 tools/u_boot_pylib/test_util.py | 13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)

Applied to u-boot-dm, thanks!

^ permalink raw reply	[flat|nested] 8+ messages in thread

end of thread, other threads:[~2024-10-17 23:15 UTC | newest]

Thread overview: 8+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2024-09-30 18:51 [PATCH 1/3] u_boot_pylib: Support running coverage on selected functions Simon Glass
2024-09-30 18:51 ` [PATCH 2/3] binman: Support getting test-coverage on just one test Simon Glass
2024-10-17 23:11   ` Simon Glass
2024-09-30 18:51 ` [PATCH 3/3] binman: Add a tutorial on resolving test-coverage bugs Simon Glass
2024-09-30 20:30   ` Heinrich Schuchardt
2024-10-08 13:13   ` Mattijs Korpershoek
2024-10-17 23:11     ` Simon Glass
2024-10-17 23:11 ` [PATCH 1/3] u_boot_pylib: Support running coverage on selected functions Simon Glass

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.