[PATCH 0/3] Get rid of some undesirable characters

[PATCH 0/3] Get rid of some undesirable characters

[Mauro Carvalho Chehab]

Hi Jon,

While rebasing my docs tree, I noticed that there are three remaining
patches from my past series that replace some UTF-8 chars by ASCII
ones that aren't applied yet. Not sure what happened here.

Anyway, those are the missing ones.

Mauro Carvalho Chehab (3):
  docs: sound: kernel-api: writing-an-alsa-driver.rst: replace some
    characters
  docs: firmware-guide: acpi: dsd: graph.rst: replace some characters
  docs: virt: kvm: api.rst: replace some characters

 .../firmware-guide/acpi/dsd/graph.rst         |  2 +-
 .../kernel-api/writing-an-alsa-driver.rst     |  2 +-
 Documentation/virt/kvm/api.rst                | 28 +++++++++----------
 3 files changed, 16 insertions(+), 16 deletions(-)

-- 
2.31.1

[PATCH 0/3] Get rid of some undesirable characters

[Mauro Carvalho Chehab]

Hi Jon,

While rebasing my docs tree, I noticed that there are three remaining
patches from my past series that replace some UTF-8 chars by ASCII
ones that aren't applied yet. Not sure what happened here.

Anyway, those are the missing ones.

Mauro Carvalho Chehab (3):
  docs: sound: kernel-api: writing-an-alsa-driver.rst: replace some
    characters
  docs: firmware-guide: acpi: dsd: graph.rst: replace some characters
  docs: virt: kvm: api.rst: replace some characters

 .../firmware-guide/acpi/dsd/graph.rst         |  2 +-
 .../kernel-api/writing-an-alsa-driver.rst     |  2 +-
 Documentation/virt/kvm/api.rst                | 28 +++++++++----------
 3 files changed, 16 insertions(+), 16 deletions(-)

-- 
2.31.1

[PATCH 1/3] docs: sound: kernel-api: writing-an-alsa-driver.rst: replace some characters

[Mauro Carvalho Chehab]

The conversion tools used during DocBook/LaTeX/html/Markdown->ReST
conversion and some cut-and-pasted text contain some characters that
aren't easily reachable on standard keyboards and/or could cause
troubles when parsed by the documentation build system.

Replace the occurences of the following characters:

	- U+00a0 (' '): NO-BREAK SPACE
	  as it can cause lines being truncated on PDF output

Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 Documentation/sound/kernel-api/writing-an-alsa-driver.rst | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/sound/kernel-api/writing-an-alsa-driver.rst b/Documentation/sound/kernel-api/writing-an-alsa-driver.rst
index 255b7d3bebd6..176b73583b7a 100644
--- a/Documentation/sound/kernel-api/writing-an-alsa-driver.rst
+++ b/Documentation/sound/kernel-api/writing-an-alsa-driver.rst
@@ -3368,7 +3368,7 @@ This ensures that the device can be closed and the driver unloaded
 without losing data.
 
 This callback is optional. If you do not set ``drain`` in the struct
-snd_rawmidi_ops structure, ALSA will simply wait for 50 milliseconds
+snd_rawmidi_ops structure, ALSA will simply wait for 50 milliseconds
 instead.
 
 Miscellaneous Devices
-- 
2.31.1

[PATCH 1/3] docs: sound: kernel-api: writing-an-alsa-driver.rst: replace some characters

[Mauro Carvalho Chehab]

The conversion tools used during DocBook/LaTeX/html/Markdown->ReST
conversion and some cut-and-pasted text contain some characters that
aren't easily reachable on standard keyboards and/or could cause
troubles when parsed by the documentation build system.

Replace the occurences of the following characters:

	- U+00a0 (' '): NO-BREAK SPACE
	  as it can cause lines being truncated on PDF output

Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 Documentation/sound/kernel-api/writing-an-alsa-driver.rst | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/sound/kernel-api/writing-an-alsa-driver.rst b/Documentation/sound/kernel-api/writing-an-alsa-driver.rst
index 255b7d3bebd6..176b73583b7a 100644
--- a/Documentation/sound/kernel-api/writing-an-alsa-driver.rst
+++ b/Documentation/sound/kernel-api/writing-an-alsa-driver.rst
@@ -3368,7 +3368,7 @@ This ensures that the device can be closed and the driver unloaded
 without losing data.
 
 This callback is optional. If you do not set ``drain`` in the struct
-snd_rawmidi_ops structure, ALSA will simply wait for 50 milliseconds
+snd_rawmidi_ops structure, ALSA will simply wait for 50 milliseconds
 instead.
 
 Miscellaneous Devices
-- 
2.31.1

[PATCH 2/3] docs: firmware-guide: acpi: dsd: graph.rst: replace some characters

[Mauro Carvalho Chehab]

The conversion tools used during DocBook/LaTeX/html/Markdown->ReST
conversion and some cut-and-pasted text contain some characters that
aren't easily reachable on standard keyboards and/or could cause
troubles when parsed by the documentation build system.

Replace the occurences of the following characters:

	- U+00a0 (' '): NO-BREAK SPACE
	  as it can cause lines being truncated on PDF output

Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 Documentation/firmware-guide/acpi/dsd/graph.rst | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/firmware-guide/acpi/dsd/graph.rst b/Documentation/firmware-guide/acpi/dsd/graph.rst
index 4341299aa937..0ced07cb1be3 100644
--- a/Documentation/firmware-guide/acpi/dsd/graph.rst
+++ b/Documentation/firmware-guide/acpi/dsd/graph.rst
@@ -159,7 +159,7 @@ References
 
 [2] Devicetree. https://www.devicetree.org, referenced 2016-10-03.
 
-[3] Documentation/devicetree/bindings/graph.txt
+[3] Documentation/devicetree/bindings/graph.txt
 
 [4] Device Properties UUID For _DSD.
     https://www.uefi.org/sites/default/files/resources/_DSD-device-properties-UUID.pdf,
-- 
2.31.1

Re: [PATCH 2/3] docs: firmware-guide: acpi: dsd: graph.rst: replace some characters

[Sakari Ailus]

Hi Mauro,

On Thu, Jul 22, 2021 at 11:50:02AM +0200, Mauro Carvalho Chehab wrote:
> The conversion tools used during DocBook/LaTeX/html/Markdown->ReST
> conversion and some cut-and-pasted text contain some characters that
> aren't easily reachable on standard keyboards and/or could cause
> troubles when parsed by the documentation build system.
> 
> Replace the occurences of the following characters:
> 
> 	- U+00a0 (' '): NO-BREAK SPACE
> 	  as it can cause lines being truncated on PDF output
> 
> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
> ---
>  Documentation/firmware-guide/acpi/dsd/graph.rst | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/Documentation/firmware-guide/acpi/dsd/graph.rst b/Documentation/firmware-guide/acpi/dsd/graph.rst
> index 4341299aa937..0ced07cb1be3 100644
> --- a/Documentation/firmware-guide/acpi/dsd/graph.rst
> +++ b/Documentation/firmware-guide/acpi/dsd/graph.rst
> @@ -159,7 +159,7 @@ References
>  
>  [2] Devicetree. https://www.devicetree.org, referenced 2016-10-03.
>  
> -[3] Documentation/devicetree/bindings/graph.txt
> +[3] Documentation/devicetree/bindings/graph.txt

I probably wrote this as a non-break space is produced by space + mod5,
preceded by opening bracket which also requires mod5.

The file is there but the file has moved to DT schema repository. I believe
the correct reference is:

https://github.com/devicetree-org/dt-schema/blob/master/schemas/graph.yaml

>  
>  [4] Device Properties UUID For _DSD.
>      https://www.uefi.org/sites/default/files/resources/_DSD-device-properties-UUID.pdf,

-- 
Kind regards,

Sakari Ailus

[PATCH 3/3] docs: virt: kvm: api.rst: replace some characters

[Mauro Carvalho Chehab]

The conversion tools used during DocBook/LaTeX/html/Markdown->ReST
conversion and some cut-and-pasted text contain some characters that
aren't easily reachable on standard keyboards and/or could cause
troubles when parsed by the documentation build system.

Replace the occurences of the following characters:

	- U+00a0 (' '): NO-BREAK SPACE
	  as it can cause lines being truncated on PDF output

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 Documentation/virt/kvm/api.rst | 28 ++++++++++++++--------------
 1 file changed, 14 insertions(+), 14 deletions(-)

diff --git a/Documentation/virt/kvm/api.rst b/Documentation/virt/kvm/api.rst
index c7b165ca70b6..3a6118540747 100644
--- a/Documentation/virt/kvm/api.rst
+++ b/Documentation/virt/kvm/api.rst
@@ -855,7 +855,7 @@ in-kernel irqchip (GIC), and for in-kernel irqchip can tell the GIC to
 use PPIs designated for specific cpus.  The irq field is interpreted
 like this::
 
-  bits:  |  31 ... 28  | 27 ... 24 | 23  ... 16 | 15 ... 0 |
+  bits:  |  31 ... 28  | 27 ... 24 | 23  ... 16 | 15 ... 0 |
   field: | vcpu2_index | irq_type  | vcpu_index |  irq_id  |
 
 The irq_type field has the following values:
@@ -2149,10 +2149,10 @@ prior to calling the KVM_RUN ioctl.
 Errors:
 
   ======   ============================================================
-  ENOENT   no such register
-  EINVAL   invalid register ID, or no such register or used with VMs in
+  ENOENT   no such register
+  EINVAL   invalid register ID, or no such register or used with VMs in
            protected virtualization mode on s390
-  EPERM    (arm64) register access not allowed before vcpu finalization
+  EPERM    (arm64) register access not allowed before vcpu finalization
   ======   ============================================================
 
 (These error codes are indicative only: do not rely on a specific error
@@ -2590,10 +2590,10 @@ following id bit patterns::
 Errors include:
 
   ======== ============================================================
-  ENOENT   no such register
-  EINVAL   invalid register ID, or no such register or used with VMs in
+  ENOENT   no such register
+  EINVAL   invalid register ID, or no such register or used with VMs in
            protected virtualization mode on s390
-  EPERM    (arm64) register access not allowed before vcpu finalization
+  EPERM    (arm64) register access not allowed before vcpu finalization
   ======== ============================================================
 
 (These error codes are indicative only: do not rely on a specific error
@@ -3112,13 +3112,13 @@ current state.  "addr" is ignored.
 Errors:
 
   ======     =================================================================
-  EINVAL     the target is unknown, or the combination of features is invalid.
-  ENOENT     a features bit specified is unknown.
+  EINVAL     the target is unknown, or the combination of features is invalid.
+  ENOENT     a features bit specified is unknown.
   ======     =================================================================
 
 This tells KVM what type of CPU to present to the guest, and what
-optional features it should have.  This will cause a reset of the cpu
-registers to their initial values.  If this is not called, KVM_RUN will
+optional features it should have.  This will cause a reset of the cpu
+registers to their initial values.  If this is not called, KVM_RUN will
 return ENOEXEC for that vcpu.
 
 The initial values are defined as:
@@ -3239,8 +3239,8 @@ VCPU matching underlying host.
 Errors:
 
   =====      ==============================================================
-  E2BIG      the reg index list is too big to fit in the array specified by
-             the user (the number required will be written into n).
+  E2BIG      the reg index list is too big to fit in the array specified by
+             the user (the number required will be written into n).
   =====      ==============================================================
 
 ::
@@ -3288,7 +3288,7 @@ specific device.
 ARM/arm64 divides the id field into two parts, a device id and an
 address type id specific to the individual device::
 
-  bits:  | 63        ...       32 | 31    ...    16 | 15    ...    0 |
+  bits:  | 63        ...       32 | 31    ...    16 | 15    ...    0 |
   field: |        0x00000000      |     device id   |  addr type id  |
 
 ARM/arm64 currently only require this when using the in-kernel GIC
-- 
2.31.1

Re: [PATCH 3/3] docs: virt: kvm: api.rst: replace some characters

[Paolo Bonzini]

On 22/07/21 11:50, Mauro Carvalho Chehab wrote:
> The conversion tools used during DocBook/LaTeX/html/Markdown->ReST
> conversion and some cut-and-pasted text contain some characters that
> aren't easily reachable on standard keyboards and/or could cause
> troubles when parsed by the documentation build system.
> 
> Replace the occurences of the following characters:
> 
> 	- U+00a0 (' '): NO-BREAK SPACE
> 	  as it can cause lines being truncated on PDF output
> 
> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
> ---
>   Documentation/virt/kvm/api.rst | 28 ++++++++++++++--------------
>   1 file changed, 14 insertions(+), 14 deletions(-)

Queued, thanks.

Paolo

> diff --git a/Documentation/virt/kvm/api.rst b/Documentation/virt/kvm/api.rst
> index c7b165ca70b6..3a6118540747 100644
> --- a/Documentation/virt/kvm/api.rst
> +++ b/Documentation/virt/kvm/api.rst
> @@ -855,7 +855,7 @@ in-kernel irqchip (GIC), and for in-kernel irqchip can tell the GIC to
>   use PPIs designated for specific cpus.  The irq field is interpreted
>   like this::
>   
> -  bits:  |  31 ... 28  | 27 ... 24 | 23  ... 16 | 15 ... 0 |
> +  bits:  |  31 ... 28  | 27 ... 24 | 23  ... 16 | 15 ... 0 |
>     field: | vcpu2_index | irq_type  | vcpu_index |  irq_id  |
>   
>   The irq_type field has the following values:
> @@ -2149,10 +2149,10 @@ prior to calling the KVM_RUN ioctl.
>   Errors:
>   
>     ======   ============================================================
> -  ENOENT   no such register
> -  EINVAL   invalid register ID, or no such register or used with VMs in
> +  ENOENT   no such register
> +  EINVAL   invalid register ID, or no such register or used with VMs in
>              protected virtualization mode on s390
> -  EPERM    (arm64) register access not allowed before vcpu finalization
> +  EPERM    (arm64) register access not allowed before vcpu finalization
>     ======   ============================================================
>   
>   (These error codes are indicative only: do not rely on a specific error
> @@ -2590,10 +2590,10 @@ following id bit patterns::
>   Errors include:
>   
>     ======== ============================================================
> -  ENOENT   no such register
> -  EINVAL   invalid register ID, or no such register or used with VMs in
> +  ENOENT   no such register
> +  EINVAL   invalid register ID, or no such register or used with VMs in
>              protected virtualization mode on s390
> -  EPERM    (arm64) register access not allowed before vcpu finalization
> +  EPERM    (arm64) register access not allowed before vcpu finalization
>     ======== ============================================================
>   
>   (These error codes are indicative only: do not rely on a specific error
> @@ -3112,13 +3112,13 @@ current state.  "addr" is ignored.
>   Errors:
>   
>     ======     =================================================================
> -  EINVAL     the target is unknown, or the combination of features is invalid.
> -  ENOENT     a features bit specified is unknown.
> +  EINVAL     the target is unknown, or the combination of features is invalid.
> +  ENOENT     a features bit specified is unknown.
>     ======     =================================================================
>   
>   This tells KVM what type of CPU to present to the guest, and what
> -optional features it should have.  This will cause a reset of the cpu
> -registers to their initial values.  If this is not called, KVM_RUN will
> +optional features it should have.  This will cause a reset of the cpu
> +registers to their initial values.  If this is not called, KVM_RUN will
>   return ENOEXEC for that vcpu.
>   
>   The initial values are defined as:
> @@ -3239,8 +3239,8 @@ VCPU matching underlying host.
>   Errors:
>   
>     =====      ==============================================================
> -  E2BIG      the reg index list is too big to fit in the array specified by
> -             the user (the number required will be written into n).
> +  E2BIG      the reg index list is too big to fit in the array specified by
> +             the user (the number required will be written into n).
>     =====      ==============================================================
>   
>   ::
> @@ -3288,7 +3288,7 @@ specific device.
>   ARM/arm64 divides the id field into two parts, a device id and an
>   address type id specific to the individual device::
>   
> -  bits:  | 63        ...       32 | 31    ...    16 | 15    ...    0 |
> +  bits:  | 63        ...       32 | 31    ...    16 | 15    ...    0 |
>     field: |        0x00000000      |     device id   |  addr type id  |
>   
>   ARM/arm64 currently only require this when using the in-kernel GIC
> 

Re: [PATCH 0/3] Get rid of some undesirable characters

[Jonathan Corbet]

Mauro Carvalho Chehab <mchehab+huawei@kernel.org> writes:

> Hi Jon,
>
> While rebasing my docs tree, I noticed that there are three remaining
> patches from my past series that replace some UTF-8 chars by ASCII
> ones that aren't applied yet. Not sure what happened here.
>
> Anyway, those are the missing ones.
>
> Mauro Carvalho Chehab (3):
>   docs: sound: kernel-api: writing-an-alsa-driver.rst: replace some
>     characters
>   docs: firmware-guide: acpi: dsd: graph.rst: replace some characters
>   docs: virt: kvm: api.rst: replace some characters
>
>  .../firmware-guide/acpi/dsd/graph.rst         |  2 +-
>  .../kernel-api/writing-an-alsa-driver.rst     |  2 +-
>  Documentation/virt/kvm/api.rst                | 28 +++++++++----------
>  3 files changed, 16 insertions(+), 16 deletions(-)

Applied, thanks.

jon

Re: [PATCH 0/3] Get rid of some undesirable characters

[Jonathan Corbet]

Mauro Carvalho Chehab <mchehab+huawei@kernel.org> writes:

> Hi Jon,
>
> While rebasing my docs tree, I noticed that there are three remaining
> patches from my past series that replace some UTF-8 chars by ASCII
> ones that aren't applied yet. Not sure what happened here.
>
> Anyway, those are the missing ones.
>
> Mauro Carvalho Chehab (3):
>   docs: sound: kernel-api: writing-an-alsa-driver.rst: replace some
>     characters
>   docs: firmware-guide: acpi: dsd: graph.rst: replace some characters
>   docs: virt: kvm: api.rst: replace some characters
>
>  .../firmware-guide/acpi/dsd/graph.rst         |  2 +-
>  .../kernel-api/writing-an-alsa-driver.rst     |  2 +-
>  Documentation/virt/kvm/api.rst                | 28 +++++++++----------
>  3 files changed, 16 insertions(+), 16 deletions(-)

Applied, thanks.

jon