All of lore.kernel.org
 help / color / mirror / Atom feed
From: Gregory CLEMENT <gregory.clement@bootlin.com>
To: Stephen Boyd <sboyd@kernel.org>,
	Mike Turquette <mturquette@baylibre.com>,
	linux-clk@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: "Rob Herring" <robh+dt@kernel.org>,
	devicetree@vger.kernel.org, "Jason Cooper" <jason@lakedaemon.net>,
	"Andrew Lunn" <andrew@lunn.ch>,
	"Sebastian Hesselbarth" <sebastian.hesselbarth@gmail.com>,
	"Thomas Petazzoni" <thomas.petazzoni@bootlin.com>,
	linux-arm-kernel@lists.infradead.org,
	"Antoine Tenart" <antoine.tenart@bootlin.com>,
	"Miquèl Raynal" <miquel.raynal@bootlin.com>,
	"Maxime Chevallier" <maxime.chevallier@bootlin.com>
Subject: Re: [PATCH v7 6/6] arm64: dts: marvell: Add cpu clock node on Armada 7K/8K
Date: Tue, 27 Aug 2019 16:40:47 +0200	[thread overview]
Message-ID: <87ftlmzn68.fsf@FE-laptop> (raw)
In-Reply-To: <20190710134346.30239-7-gregory.clement@bootlin.com>



> Add cpu clock node on AP
>
> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

Applied on mvebu/dt64

Gregory
> ---
>  arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi | 4 ++++
>  arch/arm64/boot/dts/marvell/armada-ap806.dtsi      | 7 +++++++
>  2 files changed, 11 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi
> index 2baafe12ebd4..472211159979 100644
> --- a/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi
> +++ b/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi
> @@ -20,24 +20,28 @@
>  			compatible = "arm,cortex-a72";
>  			reg = <0x000>;
>  			enable-method = "psci";
> +			clocks = <&cpu_clk 0>;
>  		};
>  		cpu1: cpu@1 {
>  			device_type = "cpu";
>  			compatible = "arm,cortex-a72";
>  			reg = <0x001>;
>  			enable-method = "psci";
> +			clocks = <&cpu_clk 0>;
>  		};
>  		cpu2: cpu@100 {
>  			device_type = "cpu";
>  			compatible = "arm,cortex-a72";
>  			reg = <0x100>;
>  			enable-method = "psci";
> +			clocks = <&cpu_clk 1>;
>  		};
>  		cpu3: cpu@101 {
>  			device_type = "cpu";
>  			compatible = "arm,cortex-a72";
>  			reg = <0x101>;
>  			enable-method = "psci";
> +			clocks = <&cpu_clk 1>;
>  		};
>  	};
>  };
> diff --git a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
> index 91dad7e4ee59..fca6536494b3 100644
> --- a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
> +++ b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
> @@ -280,6 +280,13 @@
>  				#address-cells = <1>;
>  				#size-cells = <1>;
>  
> +				cpu_clk: clock-cpu@278 {
> +					compatible = "marvell,ap806-cpu-clock";
> +					clocks = <&ap_clk 0>, <&ap_clk 1>;
> +					#clock-cells = <1>;
> +					reg = <0x278 0xa30>;
> +				};
> +
>  				ap_thermal: thermal-sensor@80 {
>  					compatible = "marvell,armada-ap806-thermal";
>  					reg = <0x80 0x10>;
> -- 
> 2.20.1
>

-- 
Gregory Clement, Bootlin
Embedded Linux and Kernel engineering
http://bootlin.com

WARNING: multiple messages have this Message-ID (diff)
From: Gregory CLEMENT <gregory.clement@bootlin.com>
To: Stephen Boyd <sboyd@kernel.org>,
	Mike Turquette <mturquette@baylibre.com>,
	linux-clk@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: devicetree@vger.kernel.org, "Jason Cooper" <jason@lakedaemon.net>,
	"Andrew Lunn" <andrew@lunn.ch>,
	"Antoine Tenart" <antoine.tenart@bootlin.com>,
	"Maxime Chevallier" <maxime.chevallier@bootlin.com>,
	"Rob Herring" <robh+dt@kernel.org>,
	"Thomas Petazzoni" <thomas.petazzoni@bootlin.com>,
	"Miquèl Raynal" <miquel.raynal@bootlin.com>,
	linux-arm-kernel@lists.infradead.org,
	"Sebastian Hesselbarth" <sebastian.hesselbarth@gmail.com>
Subject: Re: [PATCH v7 6/6] arm64: dts: marvell: Add cpu clock node on Armada 7K/8K
Date: Tue, 27 Aug 2019 16:40:47 +0200	[thread overview]
Message-ID: <87ftlmzn68.fsf@FE-laptop> (raw)
In-Reply-To: <20190710134346.30239-7-gregory.clement@bootlin.com>



> Add cpu clock node on AP
>
> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

Applied on mvebu/dt64

Gregory
> ---
>  arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi | 4 ++++
>  arch/arm64/boot/dts/marvell/armada-ap806.dtsi      | 7 +++++++
>  2 files changed, 11 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi
> index 2baafe12ebd4..472211159979 100644
> --- a/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi
> +++ b/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi
> @@ -20,24 +20,28 @@
>  			compatible = "arm,cortex-a72";
>  			reg = <0x000>;
>  			enable-method = "psci";
> +			clocks = <&cpu_clk 0>;
>  		};
>  		cpu1: cpu@1 {
>  			device_type = "cpu";
>  			compatible = "arm,cortex-a72";
>  			reg = <0x001>;
>  			enable-method = "psci";
> +			clocks = <&cpu_clk 0>;
>  		};
>  		cpu2: cpu@100 {
>  			device_type = "cpu";
>  			compatible = "arm,cortex-a72";
>  			reg = <0x100>;
>  			enable-method = "psci";
> +			clocks = <&cpu_clk 1>;
>  		};
>  		cpu3: cpu@101 {
>  			device_type = "cpu";
>  			compatible = "arm,cortex-a72";
>  			reg = <0x101>;
>  			enable-method = "psci";
> +			clocks = <&cpu_clk 1>;
>  		};
>  	};
>  };
> diff --git a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
> index 91dad7e4ee59..fca6536494b3 100644
> --- a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
> +++ b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
> @@ -280,6 +280,13 @@
>  				#address-cells = <1>;
>  				#size-cells = <1>;
>  
> +				cpu_clk: clock-cpu@278 {
> +					compatible = "marvell,ap806-cpu-clock";
> +					clocks = <&ap_clk 0>, <&ap_clk 1>;
> +					#clock-cells = <1>;
> +					reg = <0x278 0xa30>;
> +				};
> +
>  				ap_thermal: thermal-sensor@80 {
>  					compatible = "marvell,armada-ap806-thermal";
>  					reg = <0x80 0x10>;
> -- 
> 2.20.1
>

-- 
Gregory Clement, Bootlin
Embedded Linux and Kernel engineering
http://bootlin.com

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2019-08-27 14:40 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-07-10 13:43 [PATCH v7 0/6] Add CPU clock support for Armada 7K/8K Gregory CLEMENT
2019-07-10 13:43 ` Gregory CLEMENT
2019-07-10 13:43 ` [PATCH v7 1/6] dt-bindings: ap806: add the cluster clock node in the syscon file Gregory CLEMENT
2019-07-10 13:43   ` Gregory CLEMENT
2019-07-24 20:33   ` Rob Herring
2019-07-24 20:33     ` Rob Herring
2019-07-24 20:33     ` Rob Herring
2019-08-08 16:12   ` Stephen Boyd
2019-08-08 16:12     ` Stephen Boyd
2019-07-10 13:43 ` [PATCH v7 2/6] clk: mvebu: add helper file for Armada AP and CP clocks Gregory CLEMENT
2019-07-10 13:43   ` Gregory CLEMENT
2019-08-08 16:12   ` Stephen Boyd
2019-08-08 16:12     ` Stephen Boyd
2019-07-10 13:43 ` [PATCH v7 3/6] clk: mvebu: add CPU clock driver for Armada 7K/8K Gregory CLEMENT
2019-07-10 13:43   ` Gregory CLEMENT
2019-08-08 16:12   ` Stephen Boyd
2019-08-08 16:12     ` Stephen Boyd
2019-07-10 13:43 ` [PATCH v7 4/6] clk: mvebu: ap806: Fix clock name for the cluster Gregory CLEMENT
2019-07-10 13:43   ` Gregory CLEMENT
2019-08-08 16:12   ` Stephen Boyd
2019-08-08 16:12     ` Stephen Boyd
2019-07-10 13:43 ` [PATCH v7 5/6] arm64: marvell: enable the Armada 7K/8K CPU clk driver Gregory CLEMENT
2019-07-10 13:43   ` Gregory CLEMENT
2019-07-10 13:43 ` [PATCH v7 6/6] arm64: dts: marvell: Add cpu clock node on Armada 7K/8K Gregory CLEMENT
2019-07-10 13:43   ` Gregory CLEMENT
2019-08-27 14:40   ` Gregory CLEMENT [this message]
2019-08-27 14:40     ` Gregory CLEMENT

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=87ftlmzn68.fsf@FE-laptop \
    --to=gregory.clement@bootlin.com \
    --cc=andrew@lunn.ch \
    --cc=antoine.tenart@bootlin.com \
    --cc=devicetree@vger.kernel.org \
    --cc=jason@lakedaemon.net \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=maxime.chevallier@bootlin.com \
    --cc=miquel.raynal@bootlin.com \
    --cc=mturquette@baylibre.com \
    --cc=robh+dt@kernel.org \
    --cc=sboyd@kernel.org \
    --cc=sebastian.hesselbarth@gmail.com \
    --cc=thomas.petazzoni@bootlin.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.