* Firmware Crash on qca61741 hw3.2
@ 2018-01-08 11:28 Rouven Czerwinski
2018-01-25 1:10 ` Ryan Hsu
0 siblings, 1 reply; 3+ messages in thread
From: Rouven Czerwinski @ 2018-01-08 11:28 UTC (permalink / raw)
To: ath10k@lists.infradead.org
[-- Attachment #1: Type: text/plain, Size: 828 bytes --]
Hello,
I just experienced a firmware crash:
[Mo Jan 8 12:15:44 2018] ath10k_pci 0000:01:00.0: firmware crashed! (guid 07b97ee6-5eb2-4196-b038-e3cad581c735)
[Mo Jan 8 12:15:44 2018] ath10k_pci 0000:01:00.0: qca6174 hw3.2 target 0x05030000 chip_id 0x00340aff sub 1a56:1535
[Mo Jan 8 12:15:44 2018] ath10k_pci 0000:01:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 0 testmode 0
[Mo Jan 8 12:15:44 2018] ath10k_pci 0000:01:00.0: firmware ver WLAN.RM.4.4.1-00051-QCARMSWP-1 api 6 features wowlan,ignore-otp crc32 c3fd4411
[Mo Jan 8 12:15:44 2018] ath10k_pci 0000:01:00.0: board_file api 2 bmi_id N/A crc32 0e26ef70
[Mo Jan 8 12:15:44 2018] ath10k_pci 0000:01:00.0: htt-ver 3.44 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1
Complete dmesg attached.
Is this issue fixed in newer firmware versions?
Greetings,
Rouven
[-- Attachment #2: fw_crash --]
[-- Type: application/octet-stream, Size: 76103 bytes --]
[ 0.000000] Linux version 4.14.12-1-ARCH (builduser@heftig-25655) (gcc version 7.2.1 20171224 (GCC)) #1 SMP PREEMPT Fri Jan 5 18:19:34 UTC 2018
[ 0.000000] Command line: initrd=\intel-ucode.img initrd=\initramfs-linux.img root=UUID="f3fb9bf0-4f3a-4159-96ac-0090ddbbbb71" rw cryptdevice=/dev/sda2:rootdisk:allow-discards resume=/dev/mapper/rootgroup-swap verbose intel_iommu=igfx_off
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
[ 0.000000] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
[ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000a71d3fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000a71d4000-0x00000000a71d4fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000a71d5000-0x00000000a71fefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000a71ff000-0x00000000ab859fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ab85a000-0x00000000abbccfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000abbcd000-0x00000000abc05fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000abc06000-0x00000000abe71fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000abe72000-0x00000000ac4fefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ac4ff000-0x00000000ac4fffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ac500000-0x00000000afffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000064dffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] e820: update [mem 0xa3cde018-0xa3cee057] usable ==> usable
[ 0.000000] e820: update [mem 0xa3cde018-0xa3cee057] usable ==> usable
[ 0.000000] e820: update [mem 0xa3ccd018-0xa3cdd457] usable ==> usable
[ 0.000000] e820: update [mem 0xa3ccd018-0xa3cdd457] usable ==> usable
[ 0.000000] extended physical RAM map:
[ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000059000-0x000000000009dfff] usable
[ 0.000000] reserve setup_data: [mem 0x000000000009e000-0x00000000000fffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x00000000a3ccd017] usable
[ 0.000000] reserve setup_data: [mem 0x00000000a3ccd018-0x00000000a3cdd457] usable
[ 0.000000] reserve setup_data: [mem 0x00000000a3cdd458-0x00000000a3cde017] usable
[ 0.000000] reserve setup_data: [mem 0x00000000a3cde018-0x00000000a3cee057] usable
[ 0.000000] reserve setup_data: [mem 0x00000000a3cee058-0x00000000a71d3fff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000a71d4000-0x00000000a71d4fff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x00000000a71d5000-0x00000000a71fefff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000a71ff000-0x00000000ab859fff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000ab85a000-0x00000000abbccfff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000abbcd000-0x00000000abc05fff] ACPI data
[ 0.000000] reserve setup_data: [mem 0x00000000abc06000-0x00000000abe71fff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x00000000abe72000-0x00000000ac4fefff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ac4ff000-0x00000000ac4fffff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000ac500000-0x00000000afffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000064dffffff] usable
[ 0.000000] efi: EFI v2.40 by American Megatrends
[ 0.000000] efi: ACPI=0xabbd8000 ACPI 2.0=0xabbd8000 SMBIOS=0xac273000 ESRT=0xac1ea118 SMBIOS 3.0=0xac272000 MEMATTR=0xa92f2018
[ 0.000000] random: fast init done
[ 0.000000] SMBIOS 3.0.0 present.
[ 0.000000] DMI: Dell Inc. Latitude E7270/0H7Y7K, BIOS 1.18.5 12/11/2017
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x64e000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 00C0000000 mask 7FC0000000 uncachable
[ 0.000000] 1 base 00B0000000 mask 7FF0000000 uncachable
[ 0.000000] 2 base 00AE000000 mask 7FFE000000 uncachable
[ 0.000000] 3 base 00AD800000 mask 7FFF800000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000000] e820: last_pfn = 0xac500 max_arch_pfn = 0x400000000
[ 0.000000] esrt: Reserving ESRT space from 0x00000000ac1ea118 to 0x00000000ac1ea150.
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff8a4a80098000] 98000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x5df62a000, 0x5df62afff] PGTABLE
[ 0.000000] BRK [0x5df62b000, 0x5df62bfff] PGTABLE
[ 0.000000] BRK [0x5df62c000, 0x5df62cfff] PGTABLE
[ 0.000000] BRK [0x5df62d000, 0x5df62dfff] PGTABLE
[ 0.000000] BRK [0x5df62e000, 0x5df62efff] PGTABLE
[ 0.000000] BRK [0x5df62f000, 0x5df62ffff] PGTABLE
[ 0.000000] BRK [0x5df630000, 0x5df630fff] PGTABLE
[ 0.000000] BRK [0x5df631000, 0x5df631fff] PGTABLE
[ 0.000000] BRK [0x5df632000, 0x5df632fff] PGTABLE
[ 0.000000] Secure boot disabled
[ 0.000000] RAMDISK: [mem 0x7edf1000-0x7fffefff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000ABBD8000 000024 (v02 DELL )
[ 0.000000] ACPI: XSDT 0x00000000ABBD80B0 0000E4 (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000ABBF7B60 00010C (v05 DELL CBX3 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x00000000ABBD8228 01F931 (v02 DELL CBX3 01072009 INTL 20120913)
[ 0.000000] ACPI: FACS 0x00000000ABE6FE80 000040
[ 0.000000] ACPI: APIC 0x00000000ABBF7C70 000084 (v03 DELL CBX3 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000ABBF7CF8 000044 (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 0x00000000ABBF7D40 00003C (v01 DELL CBX3 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x00000000ABBF7D80 000038 (v01 DELL CBX3 01072009 AMI. 0005000B)
[ 0.000000] ACPI: SSDT 0x00000000ABBF7DB8 00046D (v01 SataRe SataTabl 00001000 INTL 20120913)
[ 0.000000] ACPI: WSMT 0x00000000ABBF8228 000028 (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.000000] ACPI: LPIT 0x00000000ABBF8250 000094 (v01 INTEL SKL-ULT 00000000 MSFT 0000005F)
[ 0.000000] ACPI: SSDT 0x00000000ABBF82E8 000248 (v02 INTEL sensrhub 00000000 INTL 20120913)
[ 0.000000] ACPI: SSDT 0x00000000ABBF8530 002BAE (v02 INTEL PtidDevc 00001000 INTL 20120913)
[ 0.000000] ACPI: SSDT 0x00000000ABBFB0E0 000814 (v02 INTEL xh_rvp07 00000000 INTL 20120913)
[ 0.000000] ACPI: SSDT 0x00000000ABBFB8F8 0004DC (v02 INTEL zpodd 00001000 INTL 20120913)
[ 0.000000] ACPI: DBGP 0x00000000ABBFBDD8 000034 (v01 INTEL 00000000 MSFT 0000005F)
[ 0.000000] ACPI: DBG2 0x00000000ABBFBE10 000054 (v00 INTEL 00000000 MSFT 0000005F)
[ 0.000000] ACPI: SSDT 0x00000000ABBFBE68 0035DA (v02 SaSsdt SaSsdt 00003000 INTL 20120913)
[ 0.000000] ACPI: UEFI 0x00000000ABBFF448 000042 (v01 00000000 00000000)
[ 0.000000] ACPI: SSDT 0x00000000ABBFF490 000E73 (v02 CpuRef CpuSsdt 00003000 INTL 20120913)
[ 0.000000] ACPI: SSDT 0x00000000ABC00308 003BFD (v02 DptfTa DptfTabl 00001000 INTL 20120913)
[ 0.000000] ACPI: MSDM 0x00000000ABC03F08 000055 (v03 DELL CBX3 06222004 AMI 00010013)
[ 0.000000] ACPI: SLIC 0x00000000ABC03F60 000176 (v03 DELL CBX3 01072009 MSFT 00010013)
[ 0.000000] ACPI: TCPA 0x00000000ABC040D8 000032 (v02 ALASKA NAPAASF 00000000 MSFT 01000013)
[ 0.000000] ACPI: BGRT 0x00000000ABC04110 000038 (v00 01072009 AMI 00010013)
[ 0.000000] ACPI: DMAR 0x00000000ABC04148 0000A8 (v01 INTEL SKL 00000001 INTL 00000001)
[ 0.000000] ACPI: ASF! 0x00000000ABC041F0 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000064dffffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x64dffc000-0x64dffffff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000064dffffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000057fff]
[ 0.000000] node 0: [mem 0x0000000000059000-0x000000000009dfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000a71d3fff]
[ 0.000000] node 0: [mem 0x00000000a71ff000-0x00000000ab859fff]
[ 0.000000] node 0: [mem 0x00000000ac4ff000-0x00000000ac4fffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000064dffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000064dffffff]
[ 0.000000] On node 0 totalpages: 6264780
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 10913 pages used for memmap
[ 0.000000] DMA32 zone: 698416 pages, LIFO batch:31
[ 0.000000] Normal zone: 86912 pages used for memmap
[ 0.000000] Normal zone: 5562368 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics memory at 0x00000000ae000000-0x00000000afffffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xa3ccd000-0xa3ccdfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xa3cdd000-0xa3cddfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xa3cde000-0xa3cdefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xa3cee000-0xa3ceefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xa71d4000-0xa71d4fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xa71d5000-0xa71fefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xab85a000-0xabbccfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xabbcd000-0xabc05fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xabc06000-0xabe71fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xabe72000-0xac4fefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xac500000-0xafffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xb0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfdffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xb0000000-0xefffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] percpu: Embedded 42 pages/cpu @ffff8a50cdc00000 s134168 r8192 d29672 u524288
[ 0.000000] pcpu-alloc: s134168 r8192 d29672 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 6166870
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: initrd=\intel-ucode.img initrd=\initramfs-linux.img root=UUID="f3fb9bf0-4f3a-4159-96ac-0090ddbbbb71" rw cryptdevice=/dev/sda2:rootdisk:allow-discards resume=/dev/mapper/rootgroup-swap verbose intel_iommu=igfx_off
[ 0.000000] DMAR: Disable GFX device mapping
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 24521832K/25059120K available (10252K kernel code, 1157K rwdata, 2788K rodata, 1348K init, 992K bss, 537288K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Kernel/User page tables isolation: enabled
[ 0.000000] ftrace: allocating 29105 entries in 114 pages
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 8448, nr_irqs: 1024, preallocated irqs: 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[ 0.000000] hpet clockevent registered
[ 0.003333] tsc: Detected 2500.000 MHz processor
[ 0.003333] Calibrating delay loop (skipped), value calculated using timer frequency.. 4993.00 BogoMIPS (lpj=8320000)
[ 0.003333] pid_max: default: 32768 minimum: 301
[ 0.003333] ACPI: Core revision 20170728
[ 0.042013] ACPI: 9 ACPI AML tables successfully acquired and loaded
[ 0.042954] Security Framework initialized
[ 0.042956] Yama: becoming mindful.
[ 0.047056] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
[ 0.049043] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.049110] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.049187] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.049381] CPU: Physical Processor ID: 0
[ 0.049382] CPU: Processor Core ID: 0
[ 0.049387] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.049388] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.049394] mce: CPU supports 8 MCE banks
[ 0.049404] CPU0: Thermal monitoring enabled (TM1)
[ 0.049420] process: using mwait in idle threads
[ 0.049423] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[ 0.049423] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[ 0.050336] Freeing SMP alternatives memory: 24K
[ 0.054250] smpboot: Max logical packages: 2
[ 0.054254] DMAR: Host address width 39
[ 0.054256] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.054265] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e3ff0505e
[ 0.054266] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.054270] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[ 0.054271] DMAR: RMRR base: 0x000000ab970000 end: 0x000000ab98ffff
[ 0.054272] DMAR: RMRR base: 0x000000ad800000 end: 0x000000afffffff
[ 0.054273] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.054274] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.054275] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
[ 0.054276] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
[ 0.054491] DMAR: DRHD: handling fault status reg 2
[ 0.054498] DMAR: [INTR-REMAP] Request device [f0:1f.0] fault index 4003 [fault reason 37] Blocked a compatibility format interrupt request
[ 0.055730] DMAR-IR: Enabled IRQ remapping in xapic mode
[ 0.055731] x2apic: IRQ remapping doesn't support X2APIC mode
[ 0.059747] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.092792] TSC deadline timer enabled
[ 0.092796] smpboot: CPU0: Intel(R) Core(TM) i5-6300U CPU @ 2.40GHz (family: 0x6, model: 0x4e, stepping: 0x3)
[ 0.103362] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[ 0.103439] ... version: 4
[ 0.103439] ... bit width: 48
[ 0.103440] ... generic registers: 4
[ 0.103441] ... value mask: 0000ffffffffffff
[ 0.103441] ... max period: 00007fffffffffff
[ 0.103442] ... fixed-purpose events: 3
[ 0.103442] ... event mask: 000000070000000f
[ 0.110012] Hierarchical SRCU implementation.
[ 0.123496] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.130010] smp: Bringing up secondary CPUs ...
[ 0.156710] x86: Booting SMP configuration:
[ 0.156715] .... node #0, CPUs: #1 #2 #3
[ 0.211007] smp: Brought up 1 node, 4 CPUs
[ 0.211007] smpboot: Total of 4 processors activated (19975.00 BogoMIPS)
[ 0.213857] devtmpfs: initialized
[ 0.213857] x86/mm: Memory block size: 128MB
[ 0.214942] PM: Registering ACPI NVS region [mem 0xa71d4000-0xa71d4fff] (4096 bytes)
[ 0.214942] PM: Registering ACPI NVS region [mem 0xabc06000-0xabe71fff] (2539520 bytes)
[ 0.214942] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.214942] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.214942] pinctrl core: initialized pinctrl subsystem
[ 0.214942] RTC time: 8:53:52, date: 01/08/18
[ 0.217055] NET: Registered protocol family 16
[ 0.217210] cpuidle: using governor ladder
[ 0.223356] cpuidle: using governor menu
[ 0.223410] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.223411] ACPI: bus type PCI registered
[ 0.223412] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.223500] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
[ 0.223502] PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820
[ 0.223511] PCI: Using configuration type 1 for base access
[ 0.224115] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.224115] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.224118] ACPI: Added _OSI(Module Device)
[ 0.224118] ACPI: Added _OSI(Processor Device)
[ 0.224118] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.224118] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.227094] ACPI: Executed 28 blocks of module-level executable AML code
[ 0.234186] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.246959] ACPI: Dynamic OEM Table Load:
[ 0.246966] ACPI: SSDT 0xFFFF8A50B1B49800 00063F (v02 PmRef Cpu0Ist 00003000 INTL 20120913)
[ 0.247210] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
[ 0.248547] ACPI: Dynamic OEM Table Load:
[ 0.248552] ACPI: SSDT 0xFFFF8A50B15FD000 00037F (v02 PmRef Cpu0Cst 00003001 INTL 20120913)
[ 0.249471] ACPI: Dynamic OEM Table Load:
[ 0.249477] ACPI: SSDT 0xFFFF8A50B1B48000 0005AA (v02 PmRef ApIst 00003000 INTL 20120913)
[ 0.250038] ACPI: Dynamic OEM Table Load:
[ 0.250042] ACPI: SSDT 0xFFFF8A50B15E7800 000119 (v02 PmRef ApCst 00003000 INTL 20120913)
[ 0.252320] ACPI: EC: EC started
[ 0.252321] ACPI: EC: interrupt blocked
[ 0.256023] ACPI: \_SB_.PCI0.LPCB.ECDV: Used as first EC
[ 0.256024] ACPI: \_SB_.PCI0.LPCB.ECDV: GPE=0x14, EC_CMD/EC_SC=0x934, EC_DATA=0x930
[ 0.256026] ACPI: \_SB_.PCI0.LPCB.ECDV: Used as boot DSDT EC to handle transactions
[ 0.256026] ACPI: Interpreter enabled
[ 0.256074] ACPI: (supports S0 S3 S4 S5)
[ 0.256075] ACPI: Using IOAPIC for interrupt routing
[ 0.256114] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.256728] ACPI: Enabled 8 GPEs in block 00 to 7F
[ 0.258425] ACPI: Power Resource [PG00] (on)
[ 0.258779] ACPI: Power Resource [PG01] (on)
[ 0.259114] ACPI: Power Resource [PG02] (on)
[ 0.264364] ACPI: Power Resource [WRST] (off)
[ 0.264713] ACPI: Power Resource [WRST] (off)
[ 0.265074] ACPI: Power Resource [WRST] (off)
[ 0.265419] ACPI: Power Resource [WRST] (off)
[ 0.265761] ACPI: Power Resource [WRST] (off)
[ 0.266383] ACPI: Power Resource [WRST] (off)
[ 0.266730] ACPI: Power Resource [WRST] (off)
[ 0.267074] ACPI: Power Resource [WRST] (off)
[ 0.268134] ACPI: Power Resource [WRST] (off)
[ 0.268474] ACPI: Power Resource [WRST] (off)
[ 0.268816] ACPI: Power Resource [WRST] (off)
[ 0.269158] ACPI: Power Resource [WRST] (off)
[ 0.269501] ACPI: Power Resource [WRST] (off)
[ 0.269842] ACPI: Power Resource [WRST] (off)
[ 0.270186] ACPI: Power Resource [WRST] (off)
[ 0.270531] ACPI: Power Resource [WRST] (off)
[ 0.270872] ACPI: Power Resource [WRST] (off)
[ 0.288245] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7e])
[ 0.288251] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.289817] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.289818] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.290414] PCI host bridge to bus 0000:00
[ 0.290416] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.290417] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.290418] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.290419] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[ 0.290420] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[ 0.290421] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[ 0.290422] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[ 0.290423] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.290424] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.290425] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.290426] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.290426] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.290427] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[ 0.290428] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[ 0.290429] pci_bus 0000:00: root bus resource [mem 0xb0000000-0xefffffff window]
[ 0.290431] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[ 0.290432] pci_bus 0000:00: root bus resource [bus 00-7e]
[ 0.290442] pci 0000:00:00.0: [8086:1904] type 00 class 0x060000
[ 0.290576] pci 0000:00:02.0: [8086:1916] type 00 class 0x030000
[ 0.290589] pci 0000:00:02.0: reg 0x10: [mem 0xe0000000-0xe0ffffff 64bit]
[ 0.290596] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.290601] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.290617] pci 0000:00:02.0: BAR 2: assigned to efifb
[ 0.290748] pci 0000:00:04.0: [8086:1903] type 00 class 0x118000
[ 0.290762] pci 0000:00:04.0: reg 0x10: [mem 0xe1340000-0xe1347fff 64bit]
[ 0.290967] pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330
[ 0.290992] pci 0000:00:14.0: reg 0x10: [mem 0xe1330000-0xe133ffff 64bit]
[ 0.291070] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.291202] pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000
[ 0.291225] pci 0000:00:14.2: reg 0x10: [mem 0xe1356000-0xe1356fff 64bit]
[ 0.291402] pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000
[ 0.291421] pci 0000:00:16.0: reg 0x10: [mem 0xe1355000-0xe1355fff 64bit]
[ 0.291477] pci 0000:00:16.0: PME# supported from D3hot
[ 0.291610] pci 0000:00:17.0: [8086:9d03] type 00 class 0x010601
[ 0.291627] pci 0000:00:17.0: reg 0x10: [mem 0xe1350000-0xe1351fff]
[ 0.291635] pci 0000:00:17.0: reg 0x14: [mem 0xe1354000-0xe13540ff]
[ 0.291642] pci 0000:00:17.0: reg 0x18: [io 0xf090-0xf097]
[ 0.291649] pci 0000:00:17.0: reg 0x1c: [io 0xf080-0xf083]
[ 0.291656] pci 0000:00:17.0: reg 0x20: [io 0xf060-0xf07f]
[ 0.291664] pci 0000:00:17.0: reg 0x24: [mem 0xe1353000-0xe13537ff]
[ 0.291706] pci 0000:00:17.0: PME# supported from D3hot
[ 0.291843] pci 0000:00:1c.0: [8086:9d14] type 01 class 0x060400
[ 0.291925] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.292104] pci 0000:00:1d.0: [8086:9d1a] type 01 class 0x060400
[ 0.292181] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.292357] pci 0000:00:1f.0: [8086:9d48] type 00 class 0x060100
[ 0.292583] pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000
[ 0.292598] pci 0000:00:1f.2: reg 0x10: [mem 0xe134c000-0xe134ffff]
[ 0.292762] pci 0000:00:1f.3: [8086:9d70] type 00 class 0x040300
[ 0.292790] pci 0000:00:1f.3: reg 0x10: [mem 0xe1348000-0xe134bfff 64bit]
[ 0.292817] pci 0000:00:1f.3: reg 0x20: [mem 0xe1320000-0xe132ffff 64bit]
[ 0.292871] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[ 0.293069] pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500
[ 0.293129] pci 0000:00:1f.4: reg 0x10: [mem 0xe1352000-0xe13520ff 64bit]
[ 0.293198] pci 0000:00:1f.4: reg 0x20: [io 0xf040-0xf05f]
[ 0.293393] pci 0000:00:1f.6: [8086:156f] type 00 class 0x020000
[ 0.293419] pci 0000:00:1f.6: reg 0x10: [mem 0xe1300000-0xe131ffff]
[ 0.293523] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
[ 0.293939] pci 0000:01:00.0: [168c:003e] type 00 class 0x028000
[ 0.294263] pci 0000:01:00.0: reg 0x10: [mem 0xe1000000-0xe11fffff 64bit]
[ 0.295446] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.303771] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.303776] pci 0000:00:1c.0: bridge window [mem 0xe1000000-0xe11fffff]
[ 0.303860] pci 0000:02:00.0: [10ec:525a] type 00 class 0xff0000
[ 0.303904] pci 0000:02:00.0: reg 0x14: [mem 0xe1200000-0xe1200fff]
[ 0.304033] pci 0000:02:00.0: supports D1 D2
[ 0.304034] pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.313414] pci 0000:00:1d.0: PCI bridge to [bus 02]
[ 0.313419] pci 0000:00:1d.0: bridge window [mem 0xe1200000-0xe12fffff]
[ 0.316701] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.316765] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.316826] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.316886] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.316945] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.317005] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.317063] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.317123] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.319039] ACPI: EC: interrupt unblocked
[ 0.319058] ACPI: EC: event unblocked
[ 0.319080] ACPI: \_SB_.PCI0.LPCB.ECDV: GPE=0x14, EC_CMD/EC_SC=0x934, EC_DATA=0x930
[ 0.319082] ACPI: \_SB_.PCI0.LPCB.ECDV: Used as boot DSDT EC to handle transactions and events
[ 0.319155] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.319155] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.319155] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.319155] vgaarb: loaded
[ 0.319155] EDAC MC: Ver: 3.0.0
[ 0.319155] Registered efivars operations
[ 0.325834] PCI: Using ACPI for IRQ routing
[ 0.339770] PCI: pci_cache_line_size set to 64 bytes
[ 0.340018] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[ 0.340019] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[ 0.340019] e820: reserve RAM buffer [mem 0xa3ccd018-0xa3ffffff]
[ 0.340020] e820: reserve RAM buffer [mem 0xa3cde018-0xa3ffffff]
[ 0.340021] e820: reserve RAM buffer [mem 0xa71d4000-0xa7ffffff]
[ 0.340022] e820: reserve RAM buffer [mem 0xab85a000-0xabffffff]
[ 0.340023] e820: reserve RAM buffer [mem 0xac500000-0xafffffff]
[ 0.340024] e820: reserve RAM buffer [mem 0x64e000000-0x64fffffff]
[ 0.340097] NetLabel: Initializing
[ 0.340097] NetLabel: domain hash size = 128
[ 0.340098] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.340111] NetLabel: unlabeled traffic allowed by default
[ 0.340522] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.340527] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[ 0.342578] clocksource: Switched to clocksource hpet
[ 0.348855] VFS: Disk quotas dquot_6.6.0
[ 0.348872] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.348919] pnp: PnP ACPI init
[ 0.349192] system 00:00: [io 0x0680-0x069f] has been reserved
[ 0.349193] system 00:00: [io 0xffff] has been reserved
[ 0.349195] system 00:00: [io 0xffff] has been reserved
[ 0.349196] system 00:00: [io 0xffff] has been reserved
[ 0.349197] system 00:00: [io 0x1800-0x18fe] has been reserved
[ 0.349198] system 00:00: [io 0x164e-0x164f] has been reserved
[ 0.349202] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.349311] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.349343] system 00:02: [io 0x1854-0x1857] has been reserved
[ 0.349346] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.349425] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.349441] pnp 00:04: Plug and Play ACPI device, IDs DLL06db PNP0f13 (active)
[ 0.350841] pnp 00:05: Plug and Play ACPI device, IDs PNP0401 (disabled)
[ 0.351051] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.351052] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.351053] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.351055] system 00:06: [mem 0xf0000000-0xf7ffffff] has been reserved
[ 0.351056] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.351057] system 00:06: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.351058] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.351060] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
[ 0.351061] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.351062] system 00:06: [mem 0xeffe0000-0xefffffff] has been reserved
[ 0.351066] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.351100] system 00:07: [mem 0xfd000000-0xfdabffff] has been reserved
[ 0.351102] system 00:07: [mem 0xfdad0000-0xfdadffff] has been reserved
[ 0.351103] system 00:07: [mem 0xfdb00000-0xfdffffff] has been reserved
[ 0.351104] system 00:07: [mem 0xfe000000-0xfe01ffff] could not be reserved
[ 0.351105] system 00:07: [mem 0xfe036000-0xfe03bfff] has been reserved
[ 0.351106] system 00:07: [mem 0xfe03d000-0xfe3fffff] has been reserved
[ 0.351108] system 00:07: [mem 0xfe410000-0xfe7fffff] has been reserved
[ 0.351110] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.351444] system 00:08: [io 0xff00-0xfffe] has been reserved
[ 0.351447] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.352664] system 00:09: [mem 0xfe029000-0xfe029fff] has been reserved
[ 0.352665] system 00:09: [mem 0xfe028000-0xfe028fff] has been reserved
[ 0.352666] system 00:09: [mem 0xfdaf0000-0xfdafffff] has been reserved
[ 0.352667] system 00:09: [mem 0xfdae0000-0xfdaeffff] has been reserved
[ 0.352669] system 00:09: [mem 0xfdac0000-0xfdacffff] has been reserved
[ 0.352671] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.353307] pnp 00:0a: Plug and Play ACPI device, IDs PNP0c31 (active)
[ 0.355899] pnp: PnP ACPI: found 11 devices
[ 0.363672] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.363699] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.363706] pci 0000:00:1c.0: bridge window [mem 0xe1000000-0xe11fffff]
[ 0.363713] pci 0000:00:1d.0: PCI bridge to [bus 02]
[ 0.363717] pci 0000:00:1d.0: bridge window [mem 0xe1200000-0xe12fffff]
[ 0.363724] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.363726] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.363727] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.363728] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 0.363729] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[ 0.363730] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[ 0.363731] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[ 0.363732] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[ 0.363733] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[ 0.363734] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[ 0.363735] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[ 0.363736] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff window]
[ 0.363737] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff window]
[ 0.363738] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff window]
[ 0.363739] pci_bus 0000:00: resource 18 [mem 0xb0000000-0xefffffff window]
[ 0.363740] pci_bus 0000:00: resource 19 [mem 0xfd000000-0xfe7fffff window]
[ 0.363741] pci_bus 0000:01: resource 1 [mem 0xe1000000-0xe11fffff]
[ 0.363743] pci_bus 0000:02: resource 1 [mem 0xe1200000-0xe12fffff]
[ 0.363875] NET: Registered protocol family 2
[ 0.364047] TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.364376] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.364498] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.364533] UDP hash table entries: 16384 (order: 7, 524288 bytes)
[ 0.364611] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
[ 0.364705] NET: Registered protocol family 1
[ 0.364720] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.365143] PCI: CLS 0 bytes, default 64
[ 0.365172] Unpacking initramfs...
[ 0.681929] Freeing initrd memory: 18488K
[ 0.681967] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.681969] software IO TLB [mem 0x9fccd000-0xa3ccd000] (64MB) mapped at [ffff8a4b1fccd000-ffff8a4b23cccfff]
[ 0.682177] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x23fa772cf26, max_idle_ns: 440795269835 ns
[ 0.682312] Scanning for low memory corruption every 60 seconds
[ 0.682914] Initialise system trusted keyrings
[ 0.682924] Key type blacklist registered
[ 0.683020] workingset: timestamp_bits=41 max_order=23 bucket_order=0
[ 0.683963] zbud: loaded
[ 0.686490] Key type asymmetric registered
[ 0.686527] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 0.686586] io scheduler noop registered
[ 0.686587] io scheduler deadline registered
[ 0.686626] io scheduler cfq registered (default)
[ 0.686627] io scheduler mq-deadline registered
[ 0.686628] io scheduler kyber registered
[ 0.686647] io scheduler bfq registered
[ 0.687346] pcieport 0000:00:1c.0: AER enabled with IRQ 122
[ 0.687370] pcieport 0000:00:1d.0: AER enabled with IRQ 123
[ 0.687386] pcieport 0000:00:1c.0: Signaling PME with IRQ 122
[ 0.687397] pcieport 0000:00:1d.0: Signaling PME with IRQ 123
[ 0.687418] efifb: probing for efifb
[ 0.687428] efifb: framebuffer at 0xd0000000, using 8100k, total 8100k
[ 0.687429] efifb: mode is 1920x1080x32, linelength=7680, pages=1
[ 0.687430] efifb: scrolling: redraw
[ 0.687431] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.691755] Console: switching to colour frame buffer device 240x67
[ 0.695965] fb0: EFI VGA frame buffer device
[ 0.695972] intel_idle: MWAIT substates: 0x11142120
[ 0.695973] intel_idle: v0.4.1 model 0x4E
[ 0.696199] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.696470] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.697414] rtc_cmos 00:01: RTC can wake from S4
[ 0.697817] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 0.697902] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.697909] intel_pstate: Intel P-state driver initializing
[ 0.698263] intel_pstate: HWP enabled
[ 0.698396] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.698469] vlv2_plat_clk vlv2_plat_clk: vlv2_plat_clk initialized
[ 0.698482] intel_pmc_core 0000:00:1f.2: enabling device (0000 -> 0002)
[ 0.698678] NET: Registered protocol family 10
[ 0.703324] Segment Routing with IPv6
[ 0.703387] NET: Registered protocol family 17
[ 0.704130] RAS: Correctable Errors collector initialized.
[ 0.704200] microcode: sig=0x406e3, pf=0x80, revision=0xc2
[ 0.704491] microcode: Microcode Update Driver: v2.2.
[ 0.704501] sched_clock: Marking stable (704486571, 0)->(713205390, -8718819)
[ 0.704870] registered taskstats version 1
[ 0.704878] Loading compiled-in X.509 certificates
[ 0.704889] zswap: loaded using pool lzo/zbud
[ 0.707495] Key type big_key registered
[ 0.708379] Magic number: 2:754:876
[ 0.708583] rtc_cmos 00:01: setting system clock to 2018-01-08 08:53:52 UTC (1515401632)
[ 0.710192] Freeing unused kernel memory: 1348K
[ 0.710192] Write protecting the kernel read-only data: 16384k
[ 0.710636] Freeing unused kernel memory: 2016K
[ 0.712593] Freeing unused kernel memory: 1308K
[ 0.739416] Linux agpgart interface v0.103
[ 0.744992] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 0.745596] ACPI: Lid Switch [LID0]
[ 0.745652] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 0.745684] ACPI: Power Button [PBTN]
[ 0.745721] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ 0.745737] ACPI: Sleep Button [SBTN]
[ 0.745774] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 0.745809] ACPI: Power Button [PWRF]
[ 0.760279] [drm] Memory usable by graphics device = 4096M
[ 0.760281] checking generic (d0000000 7e9000) vs hw (d0000000 10000000)
[ 0.760282] fb: switching to inteldrmfb from EFI VGA
[ 0.760295] Console: switching to colour dummy device 80x25
[ 0.760511] [drm] Replacing VGA console driver
[ 0.765815] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 0.765815] [drm] Driver supports precise vblank timestamp query.
[ 0.768087] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 0.768555] [drm] Finished loading DMC firmware i915/skl_dmc_ver1_26.bin (v1.26)
[ 0.790608] [drm] Initialized i915 1.6.0 20170818 for 0000:00:02.0 on minor 0
[ 0.795224] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 0.796009] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4
[ 0.815638] fbcon: inteldrmfb (fb0) is primary device
[ 1.707318] clocksource: Switched to clocksource tsc
[ 1.945945] Console: switching to colour frame buffer device 240x67
[ 1.969586] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 2.027719] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 2.028395] i8042: Warning: Keylock active
[ 2.030749] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.030896] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.036311] SCSI subsystem initialized
[ 2.038025] ACPI: bus type USB registered
[ 2.038043] usbcore: registered new interface driver usbfs
[ 2.038051] usbcore: registered new interface driver hub
[ 2.039531] usbcore: registered new device driver usb
[ 2.040626] AVX2 version of gcm_enc/dec engaged.
[ 2.040627] AES CTR mode by8 optimization enabled
[ 2.041471] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 2.041476] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 2.042573] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
[ 2.042578] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 2.042668] libata version 3.00 loaded.
[ 2.043671] hub 1-0:1.0: USB hub found
[ 2.043687] hub 1-0:1.0: 12 ports detected
[ 2.044781] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 2.044785] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 2.044918] hub 2-0:1.0: USB hub found
[ 2.044930] hub 2-0:1.0: 6 ports detected
[ 2.045829] ahci 0000:00:17.0: version 3.0
[ 2.046003] ahci 0000:00:17.0: SSS flag set, parallel bus scan disabled
[ 2.046031] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 3 ports 6 Gbps 0x7 impl SATA mode
[ 2.046033] ahci 0000:00:17.0: flags: 64bit ncq ilck stag pm led clo only pio slum part sxs deso sadm sds apst
[ 2.046388] scsi host0: ahci
[ 2.046526] scsi host1: ahci
[ 2.046588] scsi host2: ahci
[ 2.046634] ata1: SATA max UDMA/133 abar m2048@0xe1353000 port 0xe1353100 irq 127
[ 2.046635] ata2: SATA max UDMA/133 abar m2048@0xe1353000 port 0xe1353180 irq 127
[ 2.046637] ata3: SATA max UDMA/133 abar m2048@0xe1353000 port 0xe1353200 irq 127
[ 2.054507] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[ 2.347283] [drm] RC6 on
[ 2.358850] ata1: SATA link down (SStatus 4 SControl 300)
[ 2.373437] usb 1-2: new high-speed USB device number 2 using xhci_hcd
[ 2.639450] usb 2-5: new SuperSpeed USB device number 2 using xhci_hcd
[ 2.658479] usb 2-5: config 1 has an invalid interface number: 12 but max is 1
[ 2.658484] usb 2-5: config 1 has an invalid interface number: 13 but max is 1
[ 2.658486] usb 2-5: config 1 has an invalid interface number: 13 but max is 1
[ 2.658489] usb 2-5: config 1 has no interface number 0
[ 2.658491] usb 2-5: config 1 has no interface number 1
[ 2.661111] usb 2-5: Enable of device-initiated U1 failed.
[ 2.661776] usb 2-5: Enable of device-initiated U2 failed.
[ 2.672285] ata2: SATA link down (SStatus 0 SControl 300)
[ 2.780342] usb 1-7: new full-speed USB device number 3 using xhci_hcd
[ 2.956748] usb 1-7: config 0 descriptor??
[ 2.985545] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.989956] ata3.00: ATA-9: SanDisk SD8SN8U512G1122, X4140000, max UDMA/133
[ 2.989961] ata3.00: 1000215216 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 2.992661] ata3.00: configured for UDMA/133
[ 2.993137] scsi 2:0:0:0: Direct-Access ATA SanDisk SD8SN8U5 0000 PQ: 0 ANSI: 5
[ 2.998365] sd 2:0:0:0: [sda] 1000215216 512-byte logical blocks: (512 GB/477 GiB)
[ 2.998392] sd 2:0:0:0: [sda] Write Protect is off
[ 2.998396] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.998449] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.000839] sda: sda1 sda2
[ 3.001893] sd 2:0:0:0: [sda] Attached SCSI disk
[ 3.036916] device-mapper: uevent: version 1.0.3
[ 3.037094] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[ 3.100270] usb 1-8: new full-speed USB device number 4 using xhci_hcd
[ 61.631869] random: crng init done
[ 66.783667] NET: Registered protocol family 38
[ 67.072422] PM: Starting manual resume from disk
[ 67.072640] PM: Image not found (code -22)
[ 67.105671] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
[ 67.316301] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 67.331021] systemd[1]: systemd 236 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid)
[ 67.331334] systemd[1]: Detected architecture x86-64.
[ 67.332162] systemd[1]: Set hostname to <dibooki>.
[ 67.524017] systemd[1]: Reached target Remote File Systems.
[ 67.524498] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 67.525759] systemd[1]: Created slice System Slice.
[ 67.526156] systemd[1]: Listening on Journal Socket.
[ 67.527814] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 67.528466] systemd[1]: Created slice system-wg\x2dreresolve.slice.
[ 67.528883] systemd[1]: Listening on Journal Socket (/dev/log).
[ 67.561400] EXT4-fs (dm-2): re-mounted. Opts: data=ordered
[ 67.569388] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 67.615002] systemd-journald[335]: Received request to flush runtime journal from PID 1
[ 68.046859] ACPI: AC Adapter [AC] (off-line)
[ 68.081781] ACPI: Battery Slot [BAT0] (battery present)
[ 68.087737] hidraw: raw HID events driver (C) Jiri Kosina
[ 68.098641] input: DELL Wireless hotkeys as /devices/virtual/input/input7
[ 68.130792] wmi_bus wmi_bus-PNP0C14:00: WQBC data block query control method not found
[ 68.135019] parport_pc 00:05: [io 0x0378-0x037b]
[ 68.135219] parport_pc 00:05: [irq 5]
[ 68.135338] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 68.136648] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 68.139264] proc_thermal 0000:00:04.0: enabling device (0000 -> 0002)
[ 68.147746] Bluetooth: Core ver 2.22
[ 68.147758] NET: Registered protocol family 31
[ 68.147759] Bluetooth: HCI device and connection manager initialized
[ 68.147761] Bluetooth: HCI socket layer initialized
[ 68.147763] Bluetooth: L2CAP socket layer initialized
[ 68.147771] Bluetooth: SCO socket layer initialized
[ 68.163965] parport_pc 00:05: activated
[ 68.163968] parport_pc 00:05: reported by Plug and Play ACPI
[ 68.164807] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 68.165584] thermal LNXTHERM:00: registered as thermal_zone5
[ 68.165585] ACPI: Thermal Zone [THM] (25 C)
[ 68.170182] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[ 68.175413] tpm_tis 00:0a: 1.2 TPM (device-id 0xFE, rev-id 2)
[ 68.180631] pps_core: LinuxPPS API ver. 1 registered
[ 68.180633] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 68.182345] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[ 68.182374] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[ 68.183701] Bluetooth: HCI UART driver ver 2.3
[ 68.183703] Bluetooth: HCI UART protocol H4 registered
[ 68.183703] Bluetooth: HCI UART protocol BCSP registered
[ 68.188178] Bluetooth: HCI UART protocol LL registered
[ 68.188180] Bluetooth: HCI UART protocol ATH3K registered
[ 68.188181] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 68.188204] Bluetooth: HCI UART protocol Intel registered
[ 68.188458] Bluetooth: HCI UART protocol Broadcom registered
[ 68.188458] Bluetooth: HCI UART protocol QCA registered
[ 68.188459] Bluetooth: HCI UART protocol AG6XX registered
[ 68.188460] Bluetooth: HCI UART protocol Marvell registered
[ 68.190109] PTP clock support registered
[ 68.199849] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[ 68.199851] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 68.199851] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 68.199852] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 68.199852] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 68.199853] RAPL PMU: hw unit of domain psys 2^-14 Joules
[ 68.264427] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 68.264428] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 68.270746] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 68.309962] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 68.372788] Adding 25272316k swap on /dev/mapper/rootgroup-swap. Priority:-2 extents:1 across:25272316k SSFS
[ 68.390181] dell_laptop: Using i8042 filter function for receiving events
[ 68.418367] intel_rapl: Found RAPL domain package
[ 68.418368] intel_rapl: Found RAPL domain core
[ 68.418369] intel_rapl: Found RAPL domain uncore
[ 68.418370] intel_rapl: Found RAPL domain dram
[ 68.466670] raid6: sse2x1 gen() 6612 MB/s
[ 68.490156] ppdev: user-space parallel port driver
[ 68.493102] dell-wmi 9DBB5994-A997-11DA-B012-B622A1EF5492: Detected Dell WMI interface version 1
[ 68.493158] input: Dell WMI hotkeys as /devices/platform/PNP0C14:00/wmi_bus/wmi_bus-PNP0C14:00/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input9
[ 68.510651] iTCO_vendor_support: vendor-support=0
[ 68.511639] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 68.511776] iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400)
[ 68.512086] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 68.523331] raid6: sse2x1 xor() 4488 MB/s
[ 68.580008] raid6: sse2x2 gen() 5746 MB/s
[ 68.608468] ahci 0000:00:17.0: port does not support device sleep
[ 68.636673] raid6: sse2x2 xor() 8250 MB/s
[ 68.693331] raid6: sse2x4 gen() 13805 MB/s
[ 68.704284] ath10k_pci 0000:01:00.0: enabling device (0000 -> 0002)
[ 68.706161] ath10k_pci 0000:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[ 68.715643] usbcore: registered new interface driver usbserial
[ 68.715650] usbcore: registered new interface driver usbserial_generic
[ 68.715658] usbserial: USB Serial support registered for generic
[ 68.725655] usbcore: registered new interface driver qcserial
[ 68.725987] usbserial: USB Serial support registered for Qualcomm USB modem
[ 68.726764] usbcore: registered new interface driver cdc_ncm
[ 68.729508] usbcore: registered new interface driver cdc_wdm
[ 68.732753] usb 2-5: Disable of device-initiated U1 failed.
[ 68.732917] usb 2-5: Disable of device-initiated U2 failed.
[ 68.750025] raid6: sse2x4 xor() 6503 MB/s
[ 68.754303] cdc_mbim 2-5:1.12: cdc-wdm0: USB WDM device
[ 68.754455] cdc_mbim 2-5:1.12 wwan0: register 'cdc_mbim' at usb-0000:00:14.0-5, CDC MBIM, ee:40:00:3e:2b:3d
[ 68.754842] usb 2-5: Enable of device-initiated U1 failed.
[ 68.755228] usb 2-5: Enable of device-initiated U2 failed.
[ 68.755298] usbcore: registered new interface driver cdc_mbim
[ 68.756712] cdc_mbim 2-5:1.12 wwp0s20f0u5i12: renamed from wwan0
[ 68.806657] raid6: avx2x1 gen() 19188 MB/s
[ 68.863325] raid6: avx2x1 xor() 14105 MB/s
[ 68.891258] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
[ 68.919992] raid6: avx2x2 gen() 25243 MB/s
[ 68.969385] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/pre-cal-pci-0000:01:00.0.bin failed with error -2
[ 68.969407] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/cal-pci-0000:01:00.0.bin failed with error -2
[ 68.972792] ath10k_pci 0000:01:00.0: qca6174 hw3.2 target 0x05030000 chip_id 0x00340aff sub 1a56:1535
[ 68.972793] ath10k_pci 0000:01:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 0 testmode 0
[ 68.973246] ath10k_pci 0000:01:00.0: firmware ver WLAN.RM.4.4.1-00051-QCARMSWP-1 api 6 features wowlan,ignore-otp crc32 c3fd4411
[ 68.975341] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) 84:7b:eb:27:91:da
[ 68.975346] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection
[ 68.975420] e1000e 0000:00:1f.6 eth0: MAC: 12, PHY: 12, PBA No: FFFFFF-0FF
[ 68.975936] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[ 68.976117] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 68.976662] raid6: avx2x2 xor() 14905 MB/s
[ 68.976865] e1000e 0000:00:1f.6 lan: renamed from eth0
[ 69.010860] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3235: line_outs=1 (0x16/0x0/0x0/0x0/0x0) type:line
[ 69.010862] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=1 (0x14/0x0/0x0/0x0/0x0)
[ 69.010863] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[ 69.010863] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 69.010864] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 69.010865] snd_hda_codec_realtek hdaudioC0D0: Headphone Mic=0x18
[ 69.010866] snd_hda_codec_realtek hdaudioC0D0: Dock Mic=0x19
[ 69.010867] snd_hda_codec_realtek hdaudioC0D0: Headset Mic=0x1a
[ 69.010868] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x13
[ 69.058274] raid6: avx2x4 gen() 11504 MB/s
[ 69.085864] ath10k_pci 0000:01:00.0: board_file api 2 bmi_id N/A crc32 0e26ef70
[ 69.110486] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10
[ 69.111730] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11
[ 69.113350] raid6: avx2x4 xor() 14910 MB/s
[ 69.113352] raid6: using algorithm avx2x2 gen() 25243 MB/s
[ 69.113352] raid6: .... xor() 14905 MB/s, rmw enabled
[ 69.113353] raid6: using avx2x2 recovery algorithm
[ 69.113639] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
[ 69.113688] input: HDA Intel PCH Dock Line Out as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
[ 69.113730] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
[ 69.113775] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
[ 69.113819] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
[ 69.113862] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17
[ 69.113904] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18
[ 69.114464] xor: automatically using best checksumming function avx
[ 69.192734] Btrfs loaded, crc32c=crc32c-intel
[ 69.193905] BTRFS: device fsid 0d1907fa-e069-4824-a9ad-71818b1f2e28 devid 1 transid 222342 /dev/dm-1
[ 69.204571] BTRFS info (device dm-1): enabling ssd optimizations
[ 69.204574] BTRFS info (device dm-1): disk space caching is enabled
[ 69.204575] BTRFS info (device dm-1): has skinny extents
[ 69.257298] media: Linux media interface: v0.10
[ 69.269471] Linux video capture interface: v2.00
[ 69.271328] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input8
[ 69.273747] mousedev: PS/2 mouse device common for all mice
[ 69.390215] usbcore: registered new interface driver btusb
[ 69.400870] uvcvideo: Found UVC 1.00 device Integrated_Webcam_HD (1bcf:28b8)
[ 69.408344] uvcvideo 1-2:1.0: Entity type for entity Extension 4 was not initialized!
[ 69.408346] uvcvideo 1-2:1.0: Entity type for entity Extension 3 was not initialized!
[ 69.408347] uvcvideo 1-2:1.0: Entity type for entity Processing 2 was not initialized!
[ 69.408349] uvcvideo 1-2:1.0: Entity type for entity Camera 1 was not initialized!
[ 69.408447] input: Integrated_Webcam_HD: Integrate as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/input/input19
[ 69.408576] usbcore: registered new interface driver uvcvideo
[ 69.408577] USB Video Class driver (1.1.1)
[ 69.658873] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 69.658874] Bluetooth: BNEP filters: protocol multicast
[ 69.658878] Bluetooth: BNEP socket layer initialized
[ 69.670922] ath10k_pci 0000:01:00.0: Unknown eventid: 118809
[ 69.673895] ath10k_pci 0000:01:00.0: Unknown eventid: 90118
[ 69.674507] ath10k_pci 0000:01:00.0: htt-ver 3.44 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1
[ 69.753865] ath: EEPROM regdomain: 0x6c
[ 69.753866] ath: EEPROM indicates we should expect a direct regpair map
[ 69.753868] ath: Country alpha2 being used: 00
[ 69.753868] ath: Regpair used: 0x6c
[ 69.758967] ath10k_pci 0000:01:00.0 wlan: renamed from wlan0
[ 69.862083] wireguard: loading out-of-tree module taints kernel.
[ 69.863151] wireguard: WireGuard 0.0.20171221 loaded. See www.wireguard.com for information.
[ 69.863152] wireguard: Copyright (C) 2015-2017 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
[ 70.390477] IPv6: ADDRCONF(NETDEV_UP): lan: link is not ready
[ 70.603841] IPv6: ADDRCONF(NETDEV_UP): lan: link is not ready
[ 70.616492] IPv6: ADDRCONF(NETDEV_UP): wlan: link is not ready
[ 71.139701] fuse init (API version 7.26)
[ 71.330203] ath10k_pci 0000:01:00.0: Unknown eventid: 118809
[ 71.333183] ath10k_pci 0000:01:00.0: Unknown eventid: 90118
[ 71.378746] IPv6: ADDRCONF(NETDEV_UP): wlan: link is not ready
[ 72.172431] ath10k_pci 0000:01:00.0: Unknown eventid: 118809
[ 72.175573] ath10k_pci 0000:01:00.0: Unknown eventid: 90118
[ 72.204820] IPv6: ADDRCONF(NETDEV_UP): wlan: link is not ready
[ 72.219329] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 72.293589] IPv6: ADDRCONF(NETDEV_UP): wlan: link is not ready
[ 72.319122] Ebtables v2.0 registered
[ 72.954084] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 72.958918] tun: Universal TUN/TAP device driver, 1.6
[ 72.959443] virbr1: port 1(virbr1-nic) entered blocking state
[ 72.959445] virbr1: port 1(virbr1-nic) entered disabled state
[ 72.959486] device virbr1-nic entered promiscuous mode
[ 73.135618] virbr1: port 1(virbr1-nic) entered blocking state
[ 73.135623] virbr1: port 1(virbr1-nic) entered listening state
[ 73.217440] virbr1: port 1(virbr1-nic) entered disabled state
[ 76.861128] Bluetooth: RFCOMM TTY layer initialized
[ 76.861133] Bluetooth: RFCOMM socket layer initialized
[ 76.861139] Bluetooth: RFCOMM ver 1.11
[ 77.248260] IPv6: ADDRCONF(NETDEV_UP): wlan: link is not ready
[ 82.154629] wlan: authenticate with e8:65:49:22:41:3f
[ 82.195741] wlan: send auth to e8:65:49:22:41:3f (try 1/3)
[ 82.196552] wlan: authenticated
[ 82.203408] wlan: associate with e8:65:49:22:41:3f (try 1/3)
[ 82.204779] wlan: RX AssocResp from e8:65:49:22:41:3f (capab=0x1111 status=0 aid=28)
[ 82.207665] wlan: associated
[ 82.251532] wlan: Limiting TX power to 17 dBm as advertised by e8:65:49:22:41:3f
[ 82.348177] IPv6: ADDRCONF(NETDEV_CHANGE): wlan: link becomes ready
[ 595.988122] ------------[ cut here ]------------
[ 595.988144] WARNING: CPU: 2 PID: 23 at net/core/dev.c:5547 net_rx_action+0x2dc/0x3b0
[ 595.988147] Modules linked in: ccm rfcomm xt_CHECKSUM iptable_mangle ipt_REJECT nf_reject_ipv4 xt_tcpudp tun bridge stp llc ebtable_filter ebtables ip6table_filter ip6_tables iptable_filter fuse devlink wireguard(O) ip6_udp_tunnel udp_tunnel arc4 bnep uvcvideo videobuf2_vmalloc videobuf2_memops joydev videobuf2_v4l2 mousedev videobuf2_core videodev media btusb btrtl btrfs zstd_compress zstd_decompress xxhash xor snd_hda_codec_hdmi snd_soc_skl snd_soc_skl_ipc snd_hda_codec_realtek snd_soc_sst_ipc snd_soc_sst_dsp snd_hda_codec_generic snd_hda_ext_core snd_soc_sst_match snd_soc_core snd_compress snd_pcm_dmaengine ac97_bus cdc_mbim cdc_wdm cdc_ncm qcserial usb_wwan usbnet mii usbserial ath10k_pci mei_wdt iTCO_wdt ath10k_core iTCO_vendor_support wmi_bmof dell_wmi sparse_keymap ppdev nls_iso8859_1 nls_cp437
[ 595.988323] vfat ath fat mac80211 intel_rapl raid6_pq x86_pkg_temp_thermal intel_powerclamp coretemp dell_laptop snd_hda_intel dell_smbios snd_hda_codec kvm_intel dcdbas cfg80211 snd_hda_core dell_smm_hwmon e1000e kvm snd_hwdep snd_pcm irqbypass intel_cstate snd_timer psmouse intel_rapl_perf ptp input_leds led_class snd hci_uart i2c_i801 pps_core rtsx_pci_ms btbcm soundcore memstick btqca btintel tpm_tis tpm_tis_core mei_me tpm processor_thermal_device mei bluetooth shpchp parport_pc intel_soc_dts_iosf intel_pch_thermal thermal wmi parport dell_rbtn acpi_als ecdh_generic kfifo_buf i2c_hid pinctrl_sunrisepoint pinctrl_intel intel_lpss_acpi int3403_thermal rfkill hid intel_lpss industrialio int340x_thermal_zone evdev int3400_thermal battery acpi_thermal_rel mac_hid ac acpi_pad sch_fq_codel sg crypto_user
[ 595.988511] ip_tables x_tables ext4 crc16 mbcache jbd2 fscrypto algif_skcipher af_alg dm_crypt dm_mod sd_mod crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel pcbc rtsx_pci_sdmmc serio_raw mmc_core atkbd libps2 ahci libahci xhci_pci aesni_intel aes_x86_64 xhci_hcd crypto_simd glue_helper cryptd libata rtsx_pci usbcore scsi_mod usb_common i8042 serio i915 video button intel_gtt i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm agpgart
[ 595.988636] CPU: 2 PID: 23 Comm: ksoftirqd/2 Tainted: G O 4.14.12-1-ARCH #1
[ 595.988641] Hardware name: Dell Inc. Latitude E7270/0H7Y7K, BIOS 1.18.5 12/11/2017
[ 595.988646] task: ffff8a50b1b96ac0 task.stack: ffffb0b2c3234000
[ 595.988659] RIP: 0010:net_rx_action+0x2dc/0x3b0
[ 595.988664] RSP: 0018:ffffb0b2c3237e10 EFLAGS: 00010293
[ 595.988671] RAX: 0000000000000043 RBX: 0000000000000040 RCX: ffff8a50afda1ec8
[ 595.988676] RDX: ffff8a4aff801000 RSI: 00000000fffffe00 RDI: ffffffffc0dca8ca
[ 595.988681] RBP: ffff8a50afda7ba0 R08: 0000000000000002 R09: 0000000000000000
[ 595.988685] R10: 0000000000004274 R11: 0000000000000001 R12: 00000000000000e9
[ 595.988689] R13: 0000000000000000 R14: 00000000ffffffff R15: 0000000000000043
[ 595.988696] FS: 0000000000000000(0000) GS:ffff8a50cdd00000(0000) knlGS:0000000000000000
[ 595.988701] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 595.988706] CR2: 00007f973e4f3000 CR3: 00000005df00a006 CR4: 00000000003606e0
[ 595.988711] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 595.988715] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 595.988718] Call Trace:
[ 595.988743] ? sort_range+0x20/0x20
[ 595.988755] __do_softirq+0xd9/0x2da
[ 595.988769] ? sort_range+0x20/0x20
[ 595.988780] run_ksoftirqd+0x25/0x50
[ 595.988792] smpboot_thread_fn+0x114/0x1d0
[ 595.988802] kthread+0x118/0x130
[ 595.988811] ? kthread_create_on_node+0x70/0x70
[ 595.988820] ret_from_fork+0x1f/0x30
[ 595.988830] Code: ff d2 4d 8b 14 24 4d 85 d2 75 e3 44 8b 64 24 14 65 ff 0d 68 03 ad 5f 0f 85 80 fe ff ff e8 aa d5 ab ff 44 39 fb 0f 8d 7b fe ff ff <0f> ff 44 39 fb 0f 8f 79 fe ff ff 48 8b 45 10 a8 04 75 71 48 83
[ 595.988985] ---[ end trace 5ef8e1f38403f338 ]---
[ 3243.568243] wlan: AP e8:65:49:22:41:3f changed bandwidth, new config is 5540 MHz, width 2 (5550/0 MHz)
[ 3243.568247] wlan: AP e8:65:49:22:41:3f changed bandwidth in a way we can't support - disconnect
[ 3243.568249] wlan: failed to follow AP e8:65:49:22:41:3f bandwidth change, disconnect
[ 3244.524482] wlan: authenticate with e8:65:49:22:33:1f
[ 3244.562869] wlan: send auth to e8:65:49:22:33:1f (try 1/3)
[ 3244.563595] wlan: authenticated
[ 3244.579720] wlan: associate with e8:65:49:22:33:1f (try 1/3)
[ 3244.581313] wlan: RX AssocResp from e8:65:49:22:33:1f (capab=0x1111 status=0 aid=4)
[ 3244.586969] wlan: associated
[ 3244.625328] wlan: Limiting TX power to 17 dBm as advertised by e8:65:49:22:33:1f
[ 3281.656939] wlan: disconnect from AP e8:65:49:22:33:1f for new auth to e8:65:49:22:41:3f
[ 3281.667267] wlan: authenticate with e8:65:49:22:41:3f
[ 3281.705680] wlan: send auth to e8:65:49:22:41:3f (try 1/3)
[ 3281.709586] wlan: authenticated
[ 3281.726234] wlan: associate with e8:65:49:22:41:3f (try 1/3)
[ 3281.727796] wlan: RX ReassocResp from e8:65:49:22:41:3f (capab=0x1111 status=0 aid=69)
[ 3281.730278] wlan: associated
[ 3281.794737] wlan: Limiting TX power to 17 dBm as advertised by e8:65:49:22:41:3f
[ 5513.004310] wlan: AP e8:65:49:22:41:3f changed bandwidth, new config is 5500 MHz, width 3 (5530/0 MHz)
[ 5513.108785] wlan: AP e8:65:49:22:41:3f changed bandwidth, new config is 5500 MHz, width 2 (5510/0 MHz)
[ 6008.609635] wlan: AP e8:65:49:22:41:3f changed bandwidth, new config is 5200 MHz, width 2 (5210/0 MHz)
[ 6008.609642] wlan: AP e8:65:49:22:41:3f changed bandwidth to incompatible one - disconnect
[ 6008.609644] wlan: failed to follow AP e8:65:49:22:41:3f bandwidth change, disconnect
[ 6013.646747] wlan: authenticate with e8:65:49:22:33:1f
[ 6013.685943] wlan: send auth to e8:65:49:22:33:1f (try 1/3)
[ 6013.686549] wlan: authenticated
[ 6013.694842] wlan: associate with e8:65:49:22:33:1f (try 1/3)
[ 6013.696289] wlan: RX AssocResp from e8:65:49:22:33:1f (capab=0x1111 status=0 aid=16)
[ 6013.699017] wlan: associated
[ 6013.754182] wlan: Limiting TX power to 17 dBm as advertised by e8:65:49:22:33:1f
[ 6050.786644] wlan: disconnect from AP e8:65:49:22:33:1f for new auth to e8:65:49:22:41:3f
[ 6050.794297] wlan: authenticate with e8:65:49:22:41:3f
[ 6050.832984] wlan: send auth to e8:65:49:22:41:3f (try 1/3)
[ 6050.833667] wlan: authenticated
[ 6050.837937] wlan: associate with e8:65:49:22:41:3f (try 1/3)
[ 6050.860744] wlan: RX ReassocResp from e8:65:49:22:41:3f (capab=0x1111 status=0 aid=102)
[ 6050.864092] wlan: associated
[ 6050.908652] wlan: Limiting TX power to 17 dBm as advertised by e8:65:49:22:41:3f
[ 6633.622304] wlan: AP e8:65:49:22:41:3f changed bandwidth, new config is 5200 MHz, width 3 (5210/0 MHz)
[ 6635.390929] wlan: AP e8:65:49:22:41:3f changed bandwidth, new config is 5200 MHz, width 3 (5210/0 MHz)
[ 6635.501455] wlan: AP e8:65:49:22:41:3f changed bandwidth, new config is 5200 MHz, width 2 (5190/0 MHz)
[ 6665.084722] wlan: disconnect from AP e8:65:49:22:41:3f for new auth to e8:65:49:22:33:1f
[ 6665.093411] wlan: authenticate with e8:65:49:22:33:1f
[ 6665.132168] wlan: send auth to e8:65:49:22:33:1f (try 1/3)
[ 6665.132765] wlan: authenticated
[ 6665.133680] wlan: associate with e8:65:49:22:33:1f (try 1/3)
[ 6665.135396] wlan: RX ReassocResp from e8:65:49:22:33:1f (capab=0x1111 status=0 aid=16)
[ 6665.139560] wlan: associated
[ 6665.196824] wlan: Limiting TX power to 17 dBm as advertised by e8:65:49:22:33:1f
[ 6702.234977] wlan: disconnect from AP e8:65:49:22:33:1f for new auth to e8:65:49:22:41:3f
[ 6702.245765] wlan: authenticate with e8:65:49:22:41:3f
[ 6702.292581] wlan: send auth to e8:65:49:22:41:3f (try 1/3)
[ 6702.293679] wlan: authenticated
[ 6702.296924] wlan: associate with e8:65:49:22:41:3f (try 1/3)
[ 6702.298614] wlan: RX ReassocResp from e8:65:49:22:41:3f (capab=0x1111 status=0 aid=106)
[ 6702.302274] wlan: associated
[ 6702.347762] wlan: Limiting TX power to 17 dBm as advertised by e8:65:49:22:41:3f
[ 7316.410707] wlan: disconnect from AP e8:65:49:22:41:3f for new auth to e8:65:49:22:33:1f
[ 7316.417122] wlan: authenticate with e8:65:49:22:33:1f
[ 7316.456438] wlan: send auth to e8:65:49:22:33:1f (try 1/3)
[ 7316.457086] wlan: authenticated
[ 7316.459655] wlan: associate with e8:65:49:22:33:1f (try 1/3)
[ 7316.461222] wlan: RX ReassocResp from e8:65:49:22:33:1f (capab=0x1111 status=0 aid=17)
[ 7316.464521] wlan: associated
[ 7316.535163] wlan: Limiting TX power to 17 dBm as advertised by e8:65:49:22:33:1f
[ 7357.749370] pcieport 0000:00:1c.0: AER: Corrected error received: id=00e0
[ 7357.749389] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, id=00e0(Transmitter ID)
[ 7357.749400] pcieport 0000:00:1c.0: device [8086:9d14] error status/mask=00001000/00002000
[ 7357.749408] pcieport 0000:00:1c.0: [12] Replay Timer Timeout
[ 7427.574169] wlan: disconnect from AP e8:65:49:22:33:1f for new auth to e8:65:49:22:41:3f
[ 7427.581328] wlan: authenticate with e8:65:49:22:41:3f
[ 7427.628084] wlan: send auth to e8:65:49:22:41:3f (try 1/3)
[ 7427.628711] wlan: authenticated
[ 7427.633418] wlan: associate with e8:65:49:22:41:3f (try 1/3)
[ 7427.634932] wlan: RX ReassocResp from e8:65:49:22:41:3f (capab=0x1111 status=0 aid=109)
[ 7427.637477] wlan: associated
[ 7427.737131] wlan: Limiting TX power to 17 dBm as advertised by e8:65:49:22:41:3f
[ 7734.766053] wlan: disconnect from AP e8:65:49:22:41:3f for new auth to e8:65:49:22:33:1f
[ 7734.773223] wlan: authenticate with e8:65:49:22:33:1f
[ 7734.813673] wlan: send auth to e8:65:49:22:33:1f (try 1/3)
[ 7734.814304] wlan: authenticated
[ 7734.816855] wlan: associate with e8:65:49:22:33:1f (try 1/3)
[ 7734.818385] wlan: RX ReassocResp from e8:65:49:22:33:1f (capab=0x1111 status=0 aid=19)
[ 7734.821063] wlan: associated
[ 7734.849887] wlan: Limiting TX power to 17 dBm as advertised by e8:65:49:22:33:1f
[ 7808.914801] wlan: disconnect from AP e8:65:49:22:33:1f for new auth to e8:65:49:22:41:3f
[ 7808.923201] wlan: authenticate with e8:65:49:22:41:3f
[ 7808.971775] wlan: send auth to e8:65:49:22:41:3f (try 1/3)
[ 7808.972446] wlan: authenticated
[ 7808.979497] wlan: associate with e8:65:49:22:41:3f (try 1/3)
[ 7808.980979] wlan: RX ReassocResp from e8:65:49:22:41:3f (capab=0x1111 status=0 aid=112)
[ 7808.985972] wlan: associated
[ 7809.074831] wlan: Limiting TX power to 17 dBm as advertised by e8:65:49:22:41:3f
[ 7888.246417] wlan: AP e8:65:49:22:41:3f changed bandwidth, new config is 5200 MHz, width 2 (5190/0 MHz)
[ 8512.633266] wlan: AP e8:65:49:22:41:3f changed bandwidth, new config is 5200 MHz, width 3 (5210/0 MHz)
[ 8512.791693] ath10k_pci 0000:01:00.0: firmware crashed! (guid 07b97ee6-5eb2-4196-b038-e3cad581c735)
[ 8512.791706] ath10k_pci 0000:01:00.0: qca6174 hw3.2 target 0x05030000 chip_id 0x00340aff sub 1a56:1535
[ 8512.791710] ath10k_pci 0000:01:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 0 testmode 0
[ 8512.793384] ath10k_pci 0000:01:00.0: firmware ver WLAN.RM.4.4.1-00051-QCARMSWP-1 api 6 features wowlan,ignore-otp crc32 c3fd4411
[ 8512.794515] ath10k_pci 0000:01:00.0: board_file api 2 bmi_id N/A crc32 0e26ef70
[ 8512.794520] ath10k_pci 0000:01:00.0: htt-ver 3.44 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1
[ 8512.796543] ath10k_pci 0000:01:00.0: firmware register dump:
[ 8512.796545] ath10k_pci 0000:01:00.0: [00]: 0x05030000 0x000015B3 0x00987291 0x00955B31
[ 8512.796547] ath10k_pci 0000:01:00.0: [04]: 0x00987291 0x00060730 0x00000004 0x00000001
[ 8512.796548] ath10k_pci 0000:01:00.0: [08]: 0x004089F0 0x00955A00 0x000A0B00 0x00400000
[ 8512.796549] ath10k_pci 0000:01:00.0: [12]: 0x00000009 0x00000000 0x00952CD0 0x00952CE6
[ 8512.796550] ath10k_pci 0000:01:00.0: [16]: 0x00952CC4 0x0098E25F 0x00000000 0x0091080D
[ 8512.796552] ath10k_pci 0000:01:00.0: [20]: 0x40987291 0x0040E7A8 0x00000000 0x0041EE3C
[ 8512.796553] ath10k_pci 0000:01:00.0: [24]: 0x809ABF05 0x0040E808 0x00000000 0xC0987291
[ 8512.796554] ath10k_pci 0000:01:00.0: [28]: 0x809A650C 0x0040E948 0x0041FE40 0x004345C4
[ 8512.796555] ath10k_pci 0000:01:00.0: [32]: 0x809A5C63 0x0040E988 0x0040E9AC 0x0042D1A8
[ 8512.796556] ath10k_pci 0000:01:00.0: [36]: 0x8091D252 0x0040E9A8 0x00000002 0x00000001
[ 8512.796557] ath10k_pci 0000:01:00.0: [40]: 0x809FDA9D 0x0040EA58 0x0043D554 0x0042D554
[ 8512.796559] ath10k_pci 0000:01:00.0: [44]: 0x809F8B22 0x0040EA78 0x0043D554 0x00000001
[ 8512.796560] ath10k_pci 0000:01:00.0: [48]: 0x80911210 0x0040EAC8 0x00000010 0x004041D0
[ 8512.796561] ath10k_pci 0000:01:00.0: [52]: 0x80911154 0x0040EB28 0x00400000 0x00000000
[ 8512.796562] ath10k_pci 0000:01:00.0: [56]: 0x8091122D 0x0040EB48 0x00000000 0x00400600
[ 8512.796563] ath10k_pci 0000:01:00.0: Copy Engine register dump:
[ 8512.796571] ath10k_pci 0000:01:00.0: [00]: 0x00034400 2 2 3 3
[ 8512.796579] ath10k_pci 0000:01:00.0: [01]: 0x00034800 10 10 55 56
[ 8512.796586] ath10k_pci 0000:01:00.0: [02]: 0x00034c00 5 5 4 5
[ 8512.796593] ath10k_pci 0000:01:00.0: [03]: 0x00035000 7 7 8 7
[ 8512.796601] ath10k_pci 0000:01:00.0: [04]: 0x00035400 3553 3553 50 242
[ 8512.796608] ath10k_pci 0000:01:00.0: [05]: 0x00035800 0 0 64 0
[ 8512.796615] ath10k_pci 0000:01:00.0: [06]: 0x00035c00 17 17 24 24
[ 8512.796623] ath10k_pci 0000:01:00.0: [07]: 0x00036000 1 1 1 1
[ 8512.893417] ieee80211 phy0: Hardware restart was requested
[ 8513.606836] ath10k_pci 0000:01:00.0: Unknown eventid: 118809
[ 8513.609952] ath10k_pci 0000:01:00.0: Unknown eventid: 90118
[ 8513.698096] ath10k_pci 0000:01:00.0: device successfully recovered
[ 8514.513254] wlan: AP e8:65:49:22:41:3f changed bandwidth, new config is 5200 MHz, width 3 (5210/0 MHz)
[ 8514.617654] wlan: AP e8:65:49:22:41:3f changed bandwidth, new config is 5200 MHz, width 2 (5190/0 MHz)
[ 8677.455361] sctp: Hash tables configured (bind 512/512)
[ 8703.745409] wlan: deauthenticating from e8:65:49:22:41:3f by local choice (Reason: 3=DEAUTH_LEAVING)
[ 8708.695365] ath10k_pci 0000:01:00.0: Unknown eventid: 118809
[ 8708.698337] ath10k_pci 0000:01:00.0: Unknown eventid: 90118
[ 8708.725611] IPv6: ADDRCONF(NETDEV_UP): wlan: link is not ready
[ 8708.790399] IPv6: ADDRCONF(NETDEV_UP): wlan: link is not ready
[ 8713.693828] IPv6: ADDRCONF(NETDEV_UP): wlan: link is not ready
[ 8718.590035] wlan: authenticate with e8:65:49:22:33:1f
[ 8718.632601] wlan: send auth to e8:65:49:22:33:1f (try 1/3)
[ 8718.633201] wlan: authenticated
[ 8718.642666] wlan: associate with e8:65:49:22:33:1f (try 1/3)
[ 8718.644138] wlan: RX AssocResp from e8:65:49:22:33:1f (capab=0x1111 status=0 aid=13)
[ 8718.646840] wlan: associated
[ 8718.646875] wlan: Limiting TX power to 17 dBm as advertised by e8:65:49:22:33:1f
[ 8718.843472] IPv6: ADDRCONF(NETDEV_CHANGE): wlan: link becomes ready
[-- Attachment #3: Type: text/plain, Size: 146 bytes --]
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: Firmware Crash on qca61741 hw3.2
2018-01-08 11:28 Firmware Crash on qca61741 hw3.2 Rouven Czerwinski
@ 2018-01-25 1:10 ` Ryan Hsu
2018-01-25 7:43 ` Rouven Czerwinski
0 siblings, 1 reply; 3+ messages in thread
From: Ryan Hsu @ 2018-01-25 1:10 UTC (permalink / raw)
To: Rouven Czerwinski, ath10k@lists.infradead.org
On 01/08/2018 03:28 AM, Rouven Czerwinski wrote:
> Hello,
>
> I just experienced a firmware crash:
> [Mo Jan 8 12:15:44 2018] ath10k_pci 0000:01:00.0: firmware crashed! (guid 07b97ee6-5eb2-4196-b038-e3cad581c735)
> [Mo Jan 8 12:15:44 2018] ath10k_pci 0000:01:00.0: qca6174 hw3.2 target 0x05030000 chip_id 0x00340aff sub 1a56:1535
> [Mo Jan 8 12:15:44 2018] ath10k_pci 0000:01:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 0 testmode 0
> [Mo Jan 8 12:15:44 2018] ath10k_pci 0000:01:00.0: firmware ver WLAN.RM.4.4.1-00051-QCARMSWP-1 api 6 features wowlan,ignore-otp crc32 c3fd4411
> [Mo Jan 8 12:15:44 2018] ath10k_pci 0000:01:00.0: board_file api 2 bmi_id N/A crc32 0e26ef70
> [Mo Jan 8 12:15:44 2018] ath10k_pci 0000:01:00.0: htt-ver 3.44 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1
>
> Complete dmesg attached.
>
> Is this issue fixed in newer firmware versions?
It seems the failure is due to the BANDWIDTH information mismatch in firmware
when the initial connection is made with narrower PHYMODE and BANDWIDTH and
then AP changed that later.
I've seen similar issue earlier but I can't reproduce at my setup.
I've sent out a patch to address that, to reconfigure the PHYMODE while
changing the BANDWIDTH.
Can you help to give it test to see if that helps at your end?
--
Ryan Hsu
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: Firmware Crash on qca61741 hw3.2
2018-01-25 1:10 ` Ryan Hsu
@ 2018-01-25 7:43 ` Rouven Czerwinski
0 siblings, 0 replies; 3+ messages in thread
From: Rouven Czerwinski @ 2018-01-25 7:43 UTC (permalink / raw)
To: Ryan Hsu; +Cc: ath10k@lists.infradead.org
Ryan Hsu <ryanhsu@qti.qualcomm.com> writes:
> On 01/08/2018 03:28 AM, Rouven Czerwinski wrote:
>
>> Hello,
>>
>> I just experienced a firmware crash:
>> [Mo Jan 8 12:15:44 2018] ath10k_pci 0000:01:00.0: firmware crashed! (guid 07b97ee6-5eb2-4196-b038-e3cad581c735)
>> [Mo Jan 8 12:15:44 2018] ath10k_pci 0000:01:00.0: qca6174 hw3.2 target 0x05030000 chip_id 0x00340aff sub 1a56:1535
>> [Mo Jan 8 12:15:44 2018] ath10k_pci 0000:01:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 0 testmode 0
>> [Mo Jan 8 12:15:44 2018] ath10k_pci 0000:01:00.0: firmware ver WLAN.RM.4.4.1-00051-QCARMSWP-1 api 6 features wowlan,ignore-otp crc32 c3fd4411
>> [Mo Jan 8 12:15:44 2018] ath10k_pci 0000:01:00.0: board_file api 2 bmi_id N/A crc32 0e26ef70
>> [Mo Jan 8 12:15:44 2018] ath10k_pci 0000:01:00.0: htt-ver 3.44 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1
>>
>> Complete dmesg attached.
>>
>> Is this issue fixed in newer firmware versions?
>
> It seems the failure is due to the BANDWIDTH information mismatch in firmware
> when the initial connection is made with narrower PHYMODE and BANDWIDTH and
> then AP changed that later.
>
> I've seen similar issue earlier but I can't reproduce at my setup.
>
> I've sent out a patch to address that, to reconfigure the PHYMODE while
> changing the BANDWIDTH.
>
> Can you help to give it test to see if that helps at your end?
Sure, the failure was pretty reliable on my universities wireless
network. I'll apply and report back, thanks!
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2018-01-25 7:50 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2018-01-08 11:28 Firmware Crash on qca61741 hw3.2 Rouven Czerwinski
2018-01-25 1:10 ` Ryan Hsu
2018-01-25 7:43 ` Rouven Czerwinski
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.