* [PATCH 0/6] Macchiatobin updates
@ 2017-07-08 19:13 ` Russell King - ARM Linux
0 siblings, 0 replies; 16+ messages in thread
From: Russell King - ARM Linux @ 2017-07-08 19:13 UTC (permalink / raw)
To: Gregory Clement
Cc: Andrew Lunn, Catalin Marinas, devicetree-u79uwXL29TY76Z2rM5mHXA,
Jason Cooper, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
Mark Rutland, Rob Herring, Sebastian Hesselbarth, Will Deacon
This series, based upon the 4.12-rc6 backports branch in the MISL tree:
- adds a maintainer entry for the Macchiatobin board.
- adds GPIO interrupt support to the CP110s
- adds the pinmux entries
- corrects the 5V regulator GPIO entry
- adds support for the I2C mux (used for the SFP slots)
- adds PCIe support
All entries include the appropriate pinmux and GPIO configuration.
PCIe support has not been tested locally as I have no PCIe cards to
test with; this patch includes support for the PCIe reset GPIO signal.
If others can test that patch and let me know whether it works, I would
be most grateful.
MAINTAINERS | 6 ++
arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts | 89 +++++++++++++++++++++-
.../boot/dts/marvell/armada-cp110-master.dtsi | 11 ++-
.../arm64/boot/dts/marvell/armada-cp110-slave.dtsi | 11 ++-
4 files changed, 112 insertions(+), 5 deletions(-)
--
RMK's Patch system: http://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up
according to speedtest.net.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 16+ messages in thread
* [PATCH 1/6] MAINTAINERS: add Macchiatobin maintainers entry
@ 2017-07-08 19:16 ` Russell King
0 siblings, 0 replies; 16+ messages in thread
From: Russell King @ 2017-07-08 19:16 UTC (permalink / raw)
To: linux-arm-kernel
Add a maintainers entry for the Macchiatobin board.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
---
MAINTAINERS | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/MAINTAINERS b/MAINTAINERS
index 91b149bc3206..0d236fe12597 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -7976,6 +7976,12 @@ L: libertas-dev at lists.infradead.org
S: Orphan
F: drivers/net/wireless/marvell/libertas/
+MARVELL MACCHIATOBIN SUPPORT
+M: Russell King <rmk@armlinux.org.uk>
+L: linux-arm-kernel at lists.infradead.org
+S: Maintained
+F: arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
+
MARVELL MV643XX ETHERNET DRIVER
M: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
L: netdev at vger.kernel.org
--
2.7.4
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [PATCH 1/6] MAINTAINERS: add Macchiatobin maintainers entry
@ 2017-07-08 19:16 ` Russell King
0 siblings, 0 replies; 16+ messages in thread
From: Russell King @ 2017-07-08 19:16 UTC (permalink / raw)
To: Gregory Clement
Cc: Andrew Lunn, Catalin Marinas, devicetree-u79uwXL29TY76Z2rM5mHXA,
Jason Cooper, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
Mark Rutland, Rob Herring, Sebastian Hesselbarth, Will Deacon,
Rabeeh Khoury, Jon Nettleton
Add a maintainers entry for the Macchiatobin board.
Signed-off-by: Russell King <rmk+kernel-I+IVW8TIWO2tmTQ+vhA3Yw@public.gmane.org>
---
MAINTAINERS | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/MAINTAINERS b/MAINTAINERS
index 91b149bc3206..0d236fe12597 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -7976,6 +7976,12 @@ L: libertas-dev-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
S: Orphan
F: drivers/net/wireless/marvell/libertas/
+MARVELL MACCHIATOBIN SUPPORT
+M: Russell King <rmk-I+IVW8TIWO2tmTQ+vhA3Yw@public.gmane.org>
+L: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
+S: Maintained
+F: arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
+
MARVELL MV643XX ETHERNET DRIVER
M: Sebastian Hesselbarth <sebastian.hesselbarth-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
L: netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [PATCH 2/6] arm64: dts: marvell: cp110: add GPIO interrupts
@ 2017-07-08 19:16 ` Russell King
0 siblings, 0 replies; 16+ messages in thread
From: Russell King @ 2017-07-08 19:16 UTC (permalink / raw)
To: linux-arm-kernel
Add the GPIO interrupts for the CP110.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
---
arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi | 11 ++++++++++-
arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi | 11 ++++++++++-
2 files changed, 20 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
index 68fb35f0386a..a2bfc3b0bef8 100644
--- a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
@@ -131,8 +131,12 @@
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&cpm_pinctrl 0 0 32>;
+ interrupt-controller;
+ interrupts = <ICU_GRP_NSR 86 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 85 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 84 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 83 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
-
};
cpm_gpio2: gpio at 140 {
@@ -142,6 +146,11 @@
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&cpm_pinctrl 0 32 31>;
+ interrupt-controller;
+ interrupts = <ICU_GRP_NSR 82 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 81 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 80 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 79 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
};
diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
index d054684b79bc..036edf86b0f2 100644
--- a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
@@ -138,8 +138,12 @@
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&cps_pinctrl 0 0 32>;
+ interrupt-controller;
+ interrupts = <ICU_GRP_NSR 86 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 85 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 84 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 83 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
-
};
cps_gpio2: gpio at 140 {
@@ -149,6 +153,11 @@
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&cps_pinctrl 0 32 31>;
+ interrupt-controller;
+ interrupts = <ICU_GRP_NSR 82 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 81 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 80 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 79 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
--
2.7.4
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH 2/6] arm64: dts: marvell: cp110: add GPIO interrupts
@ 2017-07-08 19:16 ` Russell King
0 siblings, 0 replies; 16+ messages in thread
From: Russell King @ 2017-07-08 19:16 UTC (permalink / raw)
To: Gregory Clement
Cc: Andrew Lunn, Catalin Marinas, devicetree-u79uwXL29TY76Z2rM5mHXA,
Jason Cooper, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
Mark Rutland, Rob Herring, Sebastian Hesselbarth, Will Deacon,
Rabeeh Khoury, Jon Nettleton
Add the GPIO interrupts for the CP110.
Signed-off-by: Russell King <rmk+kernel-I+IVW8TIWO2tmTQ+vhA3Yw@public.gmane.org>
---
arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi | 11 ++++++++++-
arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi | 11 ++++++++++-
2 files changed, 20 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
index 68fb35f0386a..a2bfc3b0bef8 100644
--- a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
@@ -131,8 +131,12 @@
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&cpm_pinctrl 0 0 32>;
+ interrupt-controller;
+ interrupts = <ICU_GRP_NSR 86 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 85 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 84 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 83 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
-
};
cpm_gpio2: gpio@140 {
@@ -142,6 +146,11 @@
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&cpm_pinctrl 0 32 31>;
+ interrupt-controller;
+ interrupts = <ICU_GRP_NSR 82 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 81 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 80 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 79 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
};
diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
index d054684b79bc..036edf86b0f2 100644
--- a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
@@ -138,8 +138,12 @@
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&cps_pinctrl 0 0 32>;
+ interrupt-controller;
+ interrupts = <ICU_GRP_NSR 86 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 85 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 84 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 83 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
-
};
cps_gpio2: gpio@140 {
@@ -149,6 +153,11 @@
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&cps_pinctrl 0 32 31>;
+ interrupt-controller;
+ interrupts = <ICU_GRP_NSR 82 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 81 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 80 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 79 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [PATCH 3/6] arm64: dts: marvell: mcbin: add pinctrl nodes
@ 2017-07-08 19:16 ` Russell King
0 siblings, 0 replies; 16+ messages in thread
From: Russell King @ 2017-07-08 19:16 UTC (permalink / raw)
To: linux-arm-kernel
Add pinctrl nodes to describe the CPM I2C0 and CPS SPI1 settings.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
---
arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts | 31 +++++++++++++++++++++++
1 file changed, 31 insertions(+)
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
index dfced8c8f9e9..773a157e4af5 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
+++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
@@ -115,10 +115,14 @@
&cpm_i2c0 {
clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&cpm_i2c0_pins>;
status = "okay";
};
&cpm_mdio {
+ pinctrl-names = "default";
+ pinctrl-0 = <&cpm_ge_mdio_pins>;
status = "okay";
ge_phy: ethernet-phy at 0 {
@@ -126,6 +130,22 @@
};
};
+&cpm_pinctrl {
+ cpm_ge_mdio_pins: ge-mdio-pins {
+ marvell,pins = "mpp32", "mpp34";
+ marvell,function = "ge";
+ };
+ cpm_i2c0_pins: i2c0-pins {
+ marvell,pins = "mpp37", "mpp38";
+ marvell,function = "i2c0";
+ };
+ cpm_sdhci_pins: sdhci-pins {
+ marvell,pins = "mpp55", "mpp56", "mpp57", "mpp58", "mpp59",
+ "mpp60", "mpp61";
+ marvell,function = "sdio";
+ };
+};
+
&cpm_sata0 {
/* CPM Lane 0 - U29 */
status = "okay";
@@ -135,6 +155,8 @@
/* U6 */
broken-cd;
bus-width = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&cpm_sdhci_pins>;
status = "okay";
vqmmc-supply = <&v_3_3>;
};
@@ -160,6 +182,13 @@
phy-mode = "sgmii";
};
+&cps_pinctrl {
+ cps_spi1_pins: spi1-pins {
+ marvell,pins = "mpp12", "mpp13", "mpp14", "mpp15", "mpp16";
+ marvell,function = "spi1";
+ };
+};
+
&cps_sata0 {
/* CPS Lane 1 - U32 */
/* CPS Lane 3 - U31 */
@@ -167,6 +196,8 @@
};
&cps_spi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&cps_spi1_pins>;
status = "okay";
spi-flash at 0 {
--
2.7.4
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH 3/6] arm64: dts: marvell: mcbin: add pinctrl nodes
@ 2017-07-08 19:16 ` Russell King
0 siblings, 0 replies; 16+ messages in thread
From: Russell King @ 2017-07-08 19:16 UTC (permalink / raw)
To: Gregory Clement
Cc: Andrew Lunn, Catalin Marinas, devicetree-u79uwXL29TY76Z2rM5mHXA,
Jason Cooper, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
Mark Rutland, Rob Herring, Sebastian Hesselbarth, Will Deacon,
Rabeeh Khoury, Jon Nettleton
Add pinctrl nodes to describe the CPM I2C0 and CPS SPI1 settings.
Signed-off-by: Russell King <rmk+kernel-I+IVW8TIWO2tmTQ+vhA3Yw@public.gmane.org>
---
arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts | 31 +++++++++++++++++++++++
1 file changed, 31 insertions(+)
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
index dfced8c8f9e9..773a157e4af5 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
+++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
@@ -115,10 +115,14 @@
&cpm_i2c0 {
clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&cpm_i2c0_pins>;
status = "okay";
};
&cpm_mdio {
+ pinctrl-names = "default";
+ pinctrl-0 = <&cpm_ge_mdio_pins>;
status = "okay";
ge_phy: ethernet-phy@0 {
@@ -126,6 +130,22 @@
};
};
+&cpm_pinctrl {
+ cpm_ge_mdio_pins: ge-mdio-pins {
+ marvell,pins = "mpp32", "mpp34";
+ marvell,function = "ge";
+ };
+ cpm_i2c0_pins: i2c0-pins {
+ marvell,pins = "mpp37", "mpp38";
+ marvell,function = "i2c0";
+ };
+ cpm_sdhci_pins: sdhci-pins {
+ marvell,pins = "mpp55", "mpp56", "mpp57", "mpp58", "mpp59",
+ "mpp60", "mpp61";
+ marvell,function = "sdio";
+ };
+};
+
&cpm_sata0 {
/* CPM Lane 0 - U29 */
status = "okay";
@@ -135,6 +155,8 @@
/* U6 */
broken-cd;
bus-width = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&cpm_sdhci_pins>;
status = "okay";
vqmmc-supply = <&v_3_3>;
};
@@ -160,6 +182,13 @@
phy-mode = "sgmii";
};
+&cps_pinctrl {
+ cps_spi1_pins: spi1-pins {
+ marvell,pins = "mpp12", "mpp13", "mpp14", "mpp15", "mpp16";
+ marvell,function = "spi1";
+ };
+};
+
&cps_sata0 {
/* CPS Lane 1 - U32 */
/* CPS Lane 3 - U31 */
@@ -167,6 +196,8 @@
};
&cps_spi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&cps_spi1_pins>;
status = "okay";
spi-flash@0 {
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [PATCH 4/6] arm64: dts: marvell: mcbin: properly add GPIO
@ 2017-07-08 19:16 ` Russell King
0 siblings, 0 replies; 16+ messages in thread
From: Russell King @ 2017-07-08 19:16 UTC (permalink / raw)
To: linux-arm-kernel
Proprely add GPIO specifications for the USB 5V regulator.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
---
arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts | 11 ++++++++---
1 file changed, 8 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
index 773a157e4af5..b20c17160cbb 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
+++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
@@ -79,12 +79,13 @@
v_5v0_usb3_hst_vbus: regulator-usb3-vbus0 {
compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&cpm_gpio2 15 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&cpm_xhci_vbus_pins>;
regulator-name = "v_5v0_usb3_hst_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&cpm_gpio2 15 GPIO_ACTIVE_HIGH>;
- regulator-always-on;
- enable-active-high;
status = "okay";
};
@@ -139,6 +140,10 @@
marvell,pins = "mpp37", "mpp38";
marvell,function = "i2c0";
};
+ cpm_xhci_vbus_pins: xhci0-vbus-pins {
+ marvell,pins = "mpp47";
+ marvell,function = "gpio";
+ };
cpm_sdhci_pins: sdhci-pins {
marvell,pins = "mpp55", "mpp56", "mpp57", "mpp58", "mpp59",
"mpp60", "mpp61";
--
2.7.4
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH 4/6] arm64: dts: marvell: mcbin: properly add GPIO
@ 2017-07-08 19:16 ` Russell King
0 siblings, 0 replies; 16+ messages in thread
From: Russell King @ 2017-07-08 19:16 UTC (permalink / raw)
To: Gregory Clement
Cc: Andrew Lunn, Catalin Marinas, devicetree-u79uwXL29TY76Z2rM5mHXA,
Jason Cooper, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
Mark Rutland, Rob Herring, Sebastian Hesselbarth, Will Deacon,
Rabeeh Khoury, Jon Nettleton
Proprely add GPIO specifications for the USB 5V regulator.
Signed-off-by: Russell King <rmk+kernel-I+IVW8TIWO2tmTQ+vhA3Yw@public.gmane.org>
---
arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts | 11 ++++++++---
1 file changed, 8 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
index 773a157e4af5..b20c17160cbb 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
+++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
@@ -79,12 +79,13 @@
v_5v0_usb3_hst_vbus: regulator-usb3-vbus0 {
compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&cpm_gpio2 15 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&cpm_xhci_vbus_pins>;
regulator-name = "v_5v0_usb3_hst_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&cpm_gpio2 15 GPIO_ACTIVE_HIGH>;
- regulator-always-on;
- enable-active-high;
status = "okay";
};
@@ -139,6 +140,10 @@
marvell,pins = "mpp37", "mpp38";
marvell,function = "i2c0";
};
+ cpm_xhci_vbus_pins: xhci0-vbus-pins {
+ marvell,pins = "mpp47";
+ marvell,function = "gpio";
+ };
cpm_sdhci_pins: sdhci-pins {
marvell,pins = "mpp55", "mpp56", "mpp57", "mpp58", "mpp59",
"mpp60", "mpp61";
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [PATCH 5/6] arm64: dts: marvell: mcbin: add support for i2c mux
@ 2017-07-08 19:16 ` Russell King
0 siblings, 0 replies; 16+ messages in thread
From: Russell King @ 2017-07-08 19:16 UTC (permalink / raw)
To: linux-arm-kernel
The MACCHIATOBin board has a PCA9548 I2C mux for the SFP ports on
CP100 master I2C bus 1. Add the DT description for it.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
---
arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts | 34 +++++++++++++++++++++++
1 file changed, 34 insertions(+)
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
index b20c17160cbb..1372558d037b 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
+++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
@@ -121,6 +121,36 @@
status = "okay";
};
+&cpm_i2c1 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&cpm_i2c1_pins>;
+ status = "okay";
+
+ i2c-switch at 70 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x70>;
+
+ sfpp0_i2c: i2c at 0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+ sfpp1_i2c: i2c at 1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+ sfp_1g_i2c: i2c at 2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+ };
+};
+
&cpm_mdio {
pinctrl-names = "default";
pinctrl-0 = <&cpm_ge_mdio_pins>;
@@ -136,6 +166,10 @@
marvell,pins = "mpp32", "mpp34";
marvell,function = "ge";
};
+ cpm_i2c1_pins: i2c1-pins {
+ marvell,pins = "mpp35", "mpp36";
+ marvell,function = "i2c1";
+ };
cpm_i2c0_pins: i2c0-pins {
marvell,pins = "mpp37", "mpp38";
marvell,function = "i2c0";
--
2.7.4
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH 5/6] arm64: dts: marvell: mcbin: add support for i2c mux
@ 2017-07-08 19:16 ` Russell King
0 siblings, 0 replies; 16+ messages in thread
From: Russell King @ 2017-07-08 19:16 UTC (permalink / raw)
To: Gregory Clement
Cc: Andrew Lunn, Catalin Marinas, devicetree-u79uwXL29TY76Z2rM5mHXA,
Jason Cooper, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
Mark Rutland, Rob Herring, Sebastian Hesselbarth, Will Deacon,
Rabeeh Khoury, Jon Nettleton
The MACCHIATOBin board has a PCA9548 I2C mux for the SFP ports on
CP100 master I2C bus 1. Add the DT description for it.
Signed-off-by: Russell King <rmk+kernel-I+IVW8TIWO2tmTQ+vhA3Yw@public.gmane.org>
---
arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts | 34 +++++++++++++++++++++++
1 file changed, 34 insertions(+)
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
index b20c17160cbb..1372558d037b 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
+++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
@@ -121,6 +121,36 @@
status = "okay";
};
+&cpm_i2c1 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&cpm_i2c1_pins>;
+ status = "okay";
+
+ i2c-switch@70 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x70>;
+
+ sfpp0_i2c: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+ sfpp1_i2c: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+ sfp_1g_i2c: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+ };
+};
+
&cpm_mdio {
pinctrl-names = "default";
pinctrl-0 = <&cpm_ge_mdio_pins>;
@@ -136,6 +166,10 @@
marvell,pins = "mpp32", "mpp34";
marvell,function = "ge";
};
+ cpm_i2c1_pins: i2c1-pins {
+ marvell,pins = "mpp35", "mpp36";
+ marvell,function = "i2c1";
+ };
cpm_i2c0_pins: i2c0-pins {
marvell,pins = "mpp37", "mpp38";
marvell,function = "i2c0";
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [PATCH CFT 6/6] arm64: dts: marvell: mcbin: add support for PCIe
@ 2017-07-08 19:16 ` Russell King
0 siblings, 0 replies; 16+ messages in thread
From: Russell King @ 2017-07-08 19:16 UTC (permalink / raw)
To: linux-arm-kernel
Add support for PCIe with the the PCIe reset signal wired up to the
appropriate GPIO pin.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
---
arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
index 1372558d037b..53346ccad6cf 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
+++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
@@ -161,6 +161,15 @@
};
};
+&cpm_pcie0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&cpm_pcie_pins>;
+ num-lanes = <4>;
+ num-viewport = <8>;
+ reset-gpio = <&cpm_gpio1 20 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
&cpm_pinctrl {
cpm_ge_mdio_pins: ge-mdio-pins {
marvell,pins = "mpp32", "mpp34";
@@ -178,6 +187,10 @@
marvell,pins = "mpp47";
marvell,function = "gpio";
};
+ cpm_pcie_pins: pcie-pins {
+ marvell,pins = "mpp52";
+ marvell,function = "gpio";
+ };
cpm_sdhci_pins: sdhci-pins {
marvell,pins = "mpp55", "mpp56", "mpp57", "mpp58", "mpp59",
"mpp60", "mpp61";
--
2.7.4
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH CFT 6/6] arm64: dts: marvell: mcbin: add support for PCIe
@ 2017-07-08 19:16 ` Russell King
0 siblings, 0 replies; 16+ messages in thread
From: Russell King @ 2017-07-08 19:16 UTC (permalink / raw)
To: Gregory Clement
Cc: Andrew Lunn, Catalin Marinas, devicetree-u79uwXL29TY76Z2rM5mHXA,
Jason Cooper, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
Mark Rutland, Rob Herring, Sebastian Hesselbarth, Will Deacon,
Rabeeh Khoury, Jon Nettleton
Add support for PCIe with the the PCIe reset signal wired up to the
appropriate GPIO pin.
Signed-off-by: Russell King <rmk+kernel-I+IVW8TIWO2tmTQ+vhA3Yw@public.gmane.org>
---
arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
index 1372558d037b..53346ccad6cf 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
+++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
@@ -161,6 +161,15 @@
};
};
+&cpm_pcie0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&cpm_pcie_pins>;
+ num-lanes = <4>;
+ num-viewport = <8>;
+ reset-gpio = <&cpm_gpio1 20 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
&cpm_pinctrl {
cpm_ge_mdio_pins: ge-mdio-pins {
marvell,pins = "mpp32", "mpp34";
@@ -178,6 +187,10 @@
marvell,pins = "mpp47";
marvell,function = "gpio";
};
+ cpm_pcie_pins: pcie-pins {
+ marvell,pins = "mpp52";
+ marvell,function = "gpio";
+ };
cpm_sdhci_pins: sdhci-pins {
marvell,pins = "mpp55", "mpp56", "mpp57", "mpp58", "mpp59",
"mpp60", "mpp61";
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [PATCH 0/6] Macchiatobin updates
@ 2017-07-12 16:54 ` Gregory CLEMENT
0 siblings, 0 replies; 16+ messages in thread
From: Gregory CLEMENT @ 2017-07-12 16:54 UTC (permalink / raw)
To: linux-arm-kernel
Hi Russell King,
On sam., juil. 08 2017, Russell King - ARM Linux <linux@armlinux.org.uk> wrote:
> This series, based upon the 4.12-rc6 backports branch in the MISL tree:
> - adds a maintainer entry for the Macchiatobin board.
> - adds GPIO interrupt support to the CP110s
> - adds the pinmux entries
> - corrects the 5V regulator GPIO entry
> - adds support for the I2C mux (used for the SFP slots)
> - adds PCIe support
>
> All entries include the appropriate pinmux and GPIO configuration.
>
> PCIe support has not been tested locally as I have no PCIe cards to
> test with; this patch includes support for the PCIe reset GPIO signal.
> If others can test that patch and let me know whether it works, I would
> be most grateful.
>
The first patch had been applied on mvebu/arm64-for-4.14.
Patch 2 to 6 had been applied on mvebu/dt64-for-4.14.
For the patch 4, I merged it with the patch that Thomas previously sent
because it was not in mainline yet even if it was on the backport
branch. The resulting patch is attached.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 0001-arm64-dts-marvell-fix-USB3-regulator-definition-on-M.patch
Type: text/x-diff
Size: 2133 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20170712/7c7ddc27/attachment.bin>
-------------- next part --------------
Finally I tested the last patch with an Ethernet PCIe card it worked
well, but the reset part was not tested as I don't know how it should be
tested.
As soon as the v4.13-rc1 will be released then the branches will be rebased
on it and renamed mvebu/arm64 and mvebu/dt64.
Thanks,
Gregory
> MAINTAINERS | 6 ++
> arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts | 89 +++++++++++++++++++++-
> .../boot/dts/marvell/armada-cp110-master.dtsi | 11 ++-
> .../arm64/boot/dts/marvell/armada-cp110-slave.dtsi | 11 ++-
> 4 files changed, 112 insertions(+), 5 deletions(-)
>
> --
> RMK's Patch system: http://www.armlinux.org.uk/developer/patches/
> FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up
> according to speedtest.net.
--
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PATCH 0/6] Macchiatobin updates
@ 2017-07-12 16:54 ` Gregory CLEMENT
0 siblings, 0 replies; 16+ messages in thread
From: Gregory CLEMENT @ 2017-07-12 16:54 UTC (permalink / raw)
To: Russell King - ARM Linux
Cc: Andrew Lunn, Catalin Marinas, devicetree-u79uwXL29TY76Z2rM5mHXA,
Jason Cooper, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
Mark Rutland, Rob Herring, Sebastian Hesselbarth, Will Deacon
[-- Attachment #1: Type: text/plain, Size: 1055 bytes --]
Hi Russell King,
On sam., juil. 08 2017, Russell King - ARM Linux <linux-I+IVW8TIWO2tmTQ+vhA3Yw@public.gmane.org> wrote:
> This series, based upon the 4.12-rc6 backports branch in the MISL tree:
> - adds a maintainer entry for the Macchiatobin board.
> - adds GPIO interrupt support to the CP110s
> - adds the pinmux entries
> - corrects the 5V regulator GPIO entry
> - adds support for the I2C mux (used for the SFP slots)
> - adds PCIe support
>
> All entries include the appropriate pinmux and GPIO configuration.
>
> PCIe support has not been tested locally as I have no PCIe cards to
> test with; this patch includes support for the PCIe reset GPIO signal.
> If others can test that patch and let me know whether it works, I would
> be most grateful.
>
The first patch had been applied on mvebu/arm64-for-4.14.
Patch 2 to 6 had been applied on mvebu/dt64-for-4.14.
For the patch 4, I merged it with the patch that Thomas previously sent
because it was not in mainline yet even if it was on the backport
branch. The resulting patch is attached.
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: 0001-arm64-dts-marvell-fix-USB3-regulator-definition-on-M.patch --]
[-- Type: text/x-diff, Size: 2274 bytes --]
>From e8f260a4b40e658ab473ff8509192dcc08862d68 Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel-I+IVW8TIWO2tmTQ+vhA3Yw@public.gmane.org>
Date: Wed, 12 Jul 2017 14:56:55 +0200
Subject: [PATCH] arm64: dts: marvell: fix USB3 regulator definition on
MacchiatoBin
Due to the lack of GPIO support, the USB3 regulator definition was
left unfinished in the MacchiatoBin DT description. Now that GPIO
support is available, this commit adjusts the Device Tree to properly
describe the USB3 regulator.
[gregory.clement-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org: use commit log from Thomas]
Signed-off-by: Russell King <rmk+kernel-I+IVW8TIWO2tmTQ+vhA3Yw@public.gmane.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
Signed-off-by: Gregory CLEMENT <gregory.clement-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
---
arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts | 12 ++++++++++--
1 file changed, 10 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
index fe91433d6fcd..da13ab2103aa 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
+++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
@@ -46,6 +46,8 @@
#include "armada-8040.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
/ {
model = "Marvell 8040 MACHIATOBin";
compatible = "marvell,armada8040-mcbin", "marvell,armada8040",
@@ -77,11 +79,13 @@
v_5v0_usb3_hst_vbus: regulator-usb3-vbus0 {
compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&cpm_gpio2 15 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&cpm_xhci_vbus_pins>;
regulator-name = "v_5v0_usb3_hst_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- /* actually GPIO controlled, but 8k has no GPIO support yet */
- regulator-always-on;
status = "okay";
};
@@ -136,6 +140,10 @@
marvell,pins = "mpp37", "mpp38";
marvell,function = "i2c0";
};
+ cpm_xhci_vbus_pins: xhci0-vbus-pins {
+ marvell,pins = "mpp47";
+ marvell,function = "gpio";
+ };
cpm_sdhci_pins: sdhci-pins {
marvell,pins = "mpp55", "mpp56", "mpp57", "mpp58", "mpp59",
"mpp60", "mpp61";
--
2.13.2
[-- Attachment #3: Type: text/plain, Size: 953 bytes --]
Finally I tested the last patch with an Ethernet PCIe card it worked
well, but the reset part was not tested as I don't know how it should be
tested.
As soon as the v4.13-rc1 will be released then the branches will be rebased
on it and renamed mvebu/arm64 and mvebu/dt64.
Thanks,
Gregory
> MAINTAINERS | 6 ++
> arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts | 89 +++++++++++++++++++++-
> .../boot/dts/marvell/armada-cp110-master.dtsi | 11 ++-
> .../arm64/boot/dts/marvell/armada-cp110-slave.dtsi | 11 ++-
> 4 files changed, 112 insertions(+), 5 deletions(-)
>
> --
> RMK's Patch system: http://www.armlinux.org.uk/developer/patches/
> FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up
> according to speedtest.net.
--
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
^ permalink raw reply related [flat|nested] 16+ messages in thread