All of lore.kernel.org
 help / color / mirror / Atom feed
From: Kevin Hilman <khilman@linaro.org>
To: Nishanth Menon <nm@ti.com>
Cc: Benoit Cousson <b-cousson@ti.com>,
	linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	Florian Vaussard <florian.vaussard@epfl.ch>
Subject: Re: [PATCH v2 3/3] ARM: DTS: TWL4030: fix mux and wakeup for SYS_NIRQ line
Date: Fri, 07 Jun 2013 09:59:14 -0700	[thread overview]
Message-ID: <87fvwtn9gd.fsf@linaro.org> (raw)
In-Reply-To: <20130606234201.GA26919@kahuna> (Nishanth Menon's message of "Thu, 6 Jun 2013 18:42:01 -0500")

Nishanth Menon <nm@ti.com> writes:

> On 16:27-20130606, Kevin Hilman wrote:
>> On most OMAP3 platforms, the twl4030 IRQ line is connected to the
>> SYS_NIRQ line on OMAP.  Add another DTS include file
>> (twl4030_omap3_mux.dtsi) for boards that hook up the twl4030 this way
>> to include.
>> 
>> This allows RTC wake from off-mode to work again on OMAP3-based
>> platforms with twl4030.  Tested on 3530/Beagle, 3730/Beagle-xM,
>> 3530/Overo, 3730/Overo-STORM.
>> 
>> Special thanks to Florian Vaussard for suggesting use of preprocessor
>> feature.
>> 
>> Cc: Florian Vaussard <florian.vaussard@epfl.ch>
>> Cc: Benoit Cousson <b-cousson@ti.com>
>> Signed-off-by: Kevin Hilman <khilman@linaro.org>
>> ---
>> v2: Updated to change board files instead of twl4030 file.
>> 
>>  arch/arm/boot/dts/omap3-beagle-xm.dts    |  1 +
>>  arch/arm/boot/dts/omap3-beagle.dts       |  1 +
>>  arch/arm/boot/dts/omap3-devkit8000.dts   |  1 +
>>  arch/arm/boot/dts/omap3-evm.dts          |  1 +
>>  arch/arm/boot/dts/omap3-igep.dtsi        |  1 +
>>  arch/arm/boot/dts/omap3-overo.dtsi       |  1 +
>>  arch/arm/boot/dts/omap3430-sdp.dts       |  1 +
>>  arch/arm/boot/dts/twl4030_omap3_mux.dtsi | 17 +++++++++++++++++
> minor comment:
> can we do twl4030_omap3 instead? That way, I can add in twl4030 VP
> specific parameters which are OMAP3 specific?

Good idea, I'll rename it to twl4030_omap3.dtsi

[...]

>> diff --git a/arch/arm/boot/dts/twl4030_omap3_mux.dtsi b/arch/arm/boot/dts/twl4030_omap3_mux.dtsi
>> new file mode 100644
>> index 0000000..1bd0f9f
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/twl4030_omap3_mux.dtsi
>> @@ -0,0 +1,17 @@
> some license text?

oops

>> +&twl {
>> +	pinctrl-names = "default";
>> +	pinctrl-0 = <&twl4030_pins>;
>> +};
>> +
>> +&omap3_pmx_core {
>> +	/*
>> +	 * On most OMAP3 platforms, the twl4030 IRQ line is connected
>> +         * to the SYS_NIRQ line on OMAP.  Therefore, configure the
>> +         * defaults for the SYS_NIRQ pin here.
> ^^^ tab?

good catch.

Thanks for the review, will make the changes and resubmit.

Kevin

WARNING: multiple messages have this Message-ID (diff)
From: khilman@linaro.org (Kevin Hilman)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 3/3] ARM: DTS: TWL4030: fix mux and wakeup for SYS_NIRQ line
Date: Fri, 07 Jun 2013 09:59:14 -0700	[thread overview]
Message-ID: <87fvwtn9gd.fsf@linaro.org> (raw)
In-Reply-To: <20130606234201.GA26919@kahuna> (Nishanth Menon's message of "Thu, 6 Jun 2013 18:42:01 -0500")

Nishanth Menon <nm@ti.com> writes:

> On 16:27-20130606, Kevin Hilman wrote:
>> On most OMAP3 platforms, the twl4030 IRQ line is connected to the
>> SYS_NIRQ line on OMAP.  Add another DTS include file
>> (twl4030_omap3_mux.dtsi) for boards that hook up the twl4030 this way
>> to include.
>> 
>> This allows RTC wake from off-mode to work again on OMAP3-based
>> platforms with twl4030.  Tested on 3530/Beagle, 3730/Beagle-xM,
>> 3530/Overo, 3730/Overo-STORM.
>> 
>> Special thanks to Florian Vaussard for suggesting use of preprocessor
>> feature.
>> 
>> Cc: Florian Vaussard <florian.vaussard@epfl.ch>
>> Cc: Benoit Cousson <b-cousson@ti.com>
>> Signed-off-by: Kevin Hilman <khilman@linaro.org>
>> ---
>> v2: Updated to change board files instead of twl4030 file.
>> 
>>  arch/arm/boot/dts/omap3-beagle-xm.dts    |  1 +
>>  arch/arm/boot/dts/omap3-beagle.dts       |  1 +
>>  arch/arm/boot/dts/omap3-devkit8000.dts   |  1 +
>>  arch/arm/boot/dts/omap3-evm.dts          |  1 +
>>  arch/arm/boot/dts/omap3-igep.dtsi        |  1 +
>>  arch/arm/boot/dts/omap3-overo.dtsi       |  1 +
>>  arch/arm/boot/dts/omap3430-sdp.dts       |  1 +
>>  arch/arm/boot/dts/twl4030_omap3_mux.dtsi | 17 +++++++++++++++++
> minor comment:
> can we do twl4030_omap3 instead? That way, I can add in twl4030 VP
> specific parameters which are OMAP3 specific?

Good idea, I'll rename it to twl4030_omap3.dtsi

[...]

>> diff --git a/arch/arm/boot/dts/twl4030_omap3_mux.dtsi b/arch/arm/boot/dts/twl4030_omap3_mux.dtsi
>> new file mode 100644
>> index 0000000..1bd0f9f
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/twl4030_omap3_mux.dtsi
>> @@ -0,0 +1,17 @@
> some license text?

oops

>> +&twl {
>> +	pinctrl-names = "default";
>> +	pinctrl-0 = <&twl4030_pins>;
>> +};
>> +
>> +&omap3_pmx_core {
>> +	/*
>> +	 * On most OMAP3 platforms, the twl4030 IRQ line is connected
>> +         * to the SYS_NIRQ line on OMAP.  Therefore, configure the
>> +         * defaults for the SYS_NIRQ pin here.
> ^^^ tab?

good catch.

Thanks for the review, will make the changes and resubmit.

Kevin

  reply	other threads:[~2013-06-07 16:59 UTC|newest]

Thread overview: 52+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-05-31 22:45 [PATCH 0/3] ARM: DTS: misc. OMAP3 fixes for proper wakeup Kevin Hilman
2013-05-31 22:45 ` Kevin Hilman
2013-05-31 22:45 ` [PATCH 1/3] ARM: DTS: OMAP3: beagle/overo: mux console UART, enable wakeup Kevin Hilman
2013-05-31 22:45   ` Kevin Hilman
2013-06-03  9:36   ` Florian Vaussard
2013-06-03  9:36     ` Florian Vaussard
2013-06-03 21:26     ` Kevin Hilman
2013-06-03 21:26       ` Kevin Hilman
2013-05-31 22:45 ` [PATCH 2/3] ARM: DTS: OMAP3: beagle: enable user button via gpio_keys, " Kevin Hilman
2013-05-31 22:45   ` Kevin Hilman
2013-06-03  9:40   ` Florian Vaussard
2013-06-03  9:40     ` Florian Vaussard
2013-05-31 22:45 ` [PATCH 3/3] ARM: DTS: TWL4030: fix mux and wakeup for SYS_NIRQ line Kevin Hilman
2013-05-31 22:45   ` Kevin Hilman
2013-06-03  9:48   ` Florian Vaussard
2013-06-03  9:48     ` Florian Vaussard
2013-06-03 22:19     ` Kevin Hilman
2013-06-03 22:19       ` Kevin Hilman
2013-06-03 22:39       ` Jason Cooper
2013-06-03 22:39         ` Jason Cooper
2013-06-04 17:58         ` Kevin Hilman
2013-06-04 17:58           ` Kevin Hilman
2013-06-04 18:05           ` Jason Cooper
2013-06-04 18:05             ` Jason Cooper
2013-06-05  7:41       ` Florian Vaussard
2013-06-05  7:41         ` Florian Vaussard
2013-06-05 13:52       ` Benoit Cousson
2013-06-05 13:52         ` Benoit Cousson
2013-06-05 14:26         ` Kevin Hilman
2013-06-05 14:26           ` Kevin Hilman
2013-06-06 23:27 ` [PATCH v2 " Kevin Hilman
2013-06-06 23:27   ` Kevin Hilman
2013-06-06 23:42   ` Nishanth Menon
2013-06-06 23:42     ` Nishanth Menon
2013-06-07 16:59     ` Kevin Hilman [this message]
2013-06-07 16:59       ` Kevin Hilman
2013-06-07 18:31 ` [PATCH v3] " Kevin Hilman
2013-06-07 18:31   ` Kevin Hilman
2013-06-07 19:31   ` Nishanth Menon
2013-06-07 19:31     ` Nishanth Menon
2013-06-10  9:22     ` Benoit Cousson
2013-06-10  9:22       ` Benoit Cousson
2013-06-10 16:40       ` Kevin Hilman
2013-06-10 16:40         ` Kevin Hilman
2013-06-11 11:33         ` Cousson, Benoit
2013-06-11 11:33           ` Cousson, Benoit
2013-06-11 11:43           ` Benoit Cousson
2013-06-11 11:43             ` Benoit Cousson
2013-06-11 14:30             ` Kevin Hilman
2013-06-11 14:30               ` Kevin Hilman
2013-06-19  1:25               ` Benoit Cousson
2013-06-19  1:25                 ` Benoit Cousson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=87fvwtn9gd.fsf@linaro.org \
    --to=khilman@linaro.org \
    --cc=b-cousson@ti.com \
    --cc=florian.vaussard@epfl.ch \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=nm@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.