From: Jani Nikula <jani.nikula@intel.com>
To: Uma Shankar <uma.shankar@intel.com>, intel-gfx@lists.freedesktop.org
Subject: Re: [Intel-gfx] [v2] drm/i915/display: Add a wrapper function for vga decode setup
Date: Tue, 26 Sep 2023 13:54:31 +0300 [thread overview]
Message-ID: <87h6nhkxw8.fsf@intel.com> (raw)
In-Reply-To: <20230925065014.1252784-1-uma.shankar@intel.com>
On Mon, 25 Sep 2023, Uma Shankar <uma.shankar@intel.com> wrote:
> Some of the VGA functionality is not needed by the proposed
> Intel Xe driver, while this will be utilized by i915.
> Adding a wrapper function for VGA decode setup.
So, this duplicates intel_vga_set_decode() without removing the old
one. Is that the intention?
I guess the idea here is that xe doesn't build intel_gmch, so you can
add a nop version there?
BR,
Jani.
>
> v2: Addressed Jani Nikula's review comments.
>
> Signed-off-by: Uma Shankar <uma.shankar@intel.com>
> ---
> drivers/gpu/drm/i915/display/intel_vga.c | 2 --
> drivers/gpu/drm/i915/soc/intel_gmch.c | 14 ++++++++++++++
> drivers/gpu/drm/i915/soc/intel_gmch.h | 2 ++
> 3 files changed, 16 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_vga.c b/drivers/gpu/drm/i915/display/intel_vga.c
> index 286a0bdd28c6..0f65ce115035 100644
> --- a/drivers/gpu/drm/i915/display/intel_vga.c
> +++ b/drivers/gpu/drm/i915/display/intel_vga.c
> @@ -3,11 +3,9 @@
> * Copyright © 2019 Intel Corporation
> */
>
> -#include <linux/pci.h>
> #include <linux/vgaarb.h>
>
> #include <video/vga.h>
> -
> #include "soc/intel_gmch.h"
>
> #include "i915_drv.h"
> diff --git a/drivers/gpu/drm/i915/soc/intel_gmch.c b/drivers/gpu/drm/i915/soc/intel_gmch.c
> index 49c7fb16e934..f32e9f78770a 100644
> --- a/drivers/gpu/drm/i915/soc/intel_gmch.c
> +++ b/drivers/gpu/drm/i915/soc/intel_gmch.c
> @@ -5,6 +5,7 @@
>
> #include <linux/pci.h>
> #include <linux/pnp.h>
> +#include <linux/vgaarb.h>
>
> #include <drm/drm_managed.h>
> #include <drm/i915_drm.h>
> @@ -167,3 +168,16 @@ int intel_gmch_vga_set_state(struct drm_i915_private *i915, bool enable_decode)
>
> return 0;
> }
> +
> +unsigned int intel_gmch_vga_set_decode(struct pci_dev *pdev, bool enable_decode)
> +{
> + struct drm_i915_private *i915 = pdev_to_i915(pdev);
> +
> + intel_gmch_vga_set_state(i915, enable_decode);
> +
> + if (enable_decode)
> + return VGA_RSRC_LEGACY_IO | VGA_RSRC_LEGACY_MEM |
> + VGA_RSRC_NORMAL_IO | VGA_RSRC_NORMAL_MEM;
> + else
> + return VGA_RSRC_NORMAL_IO | VGA_RSRC_NORMAL_MEM;
> +}
> diff --git a/drivers/gpu/drm/i915/soc/intel_gmch.h b/drivers/gpu/drm/i915/soc/intel_gmch.h
> index d0133eedc720..23be2d113afd 100644
> --- a/drivers/gpu/drm/i915/soc/intel_gmch.h
> +++ b/drivers/gpu/drm/i915/soc/intel_gmch.h
> @@ -8,11 +8,13 @@
>
> #include <linux/types.h>
>
> +struct pci_dev;
> struct drm_i915_private;
>
> int intel_gmch_bridge_setup(struct drm_i915_private *i915);
> void intel_gmch_bar_setup(struct drm_i915_private *i915);
> void intel_gmch_bar_teardown(struct drm_i915_private *i915);
> int intel_gmch_vga_set_state(struct drm_i915_private *i915, bool enable_decode);
> +unsigned int intel_gmch_vga_set_decode(struct pci_dev *pdev, bool enable_decode);
>
> #endif /* __INTEL_GMCH_H__ */
--
Jani Nikula, Intel
next prev parent reply other threads:[~2023-09-26 10:54 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-09-25 6:50 [Intel-gfx] [v2] drm/i915/display: Add a wrapper function for vga decode setup Uma Shankar
2023-09-25 9:22 ` [Intel-gfx] ✓ Fi.CI.BAT: success for drm/i915/display: Add a wrapper function for vga decode setup (rev2) Patchwork
2023-09-25 11:37 ` [Intel-gfx] ✗ Fi.CI.IGT: failure " Patchwork
2023-09-26 10:54 ` Jani Nikula [this message]
2023-09-26 10:55 ` [Intel-gfx] [v2] drm/i915/display: Add a wrapper function for vga decode setup Jani Nikula
2023-09-26 18:58 ` Shankar, Uma
2023-09-26 18:57 ` Shankar, Uma
2023-09-26 11:29 ` [Intel-gfx] ✓ Fi.CI.IGT: success for drm/i915/display: Add a wrapper function for vga decode setup (rev2) Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87h6nhkxw8.fsf@intel.com \
--to=jani.nikula@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=uma.shankar@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.