From: "Dixit, Ashutosh" <ashutosh.dixit@intel.com>
To: Sujaritha Sundaresan <sujaritha.sundaresan@intel.com>
Cc: intel-xe@lists.freedesktop.org
Subject: Re: [Intel-xe] [PATCH] [RFC]drm/xe: Sysfs entries to query fused min, max frequency of lmem
Date: Tue, 06 Jun 2023 08:56:21 -0700 [thread overview]
Message-ID: <87h6rkmvoa.wl-ashutosh.dixit@intel.com> (raw)
In-Reply-To: <20230606082142.7846-1-sujaritha.sundaresan@intel.com>
On Tue, 06 Jun 2023 01:21:42 -0700, Sujaritha Sundaresan wrote:
>
Hi Suja,
Once again sysfs_create_files is missing from the patch.
Also xe calls lmem vram, so sysfs file names should something like
vram_rp0/rpn_freq_mhz, "mem" is too general.
Ashutosh
> Signed-off-by: Sujaritha Sundaresan <sujaritha.sundaresan@intel.com>
> ---
> drivers/gpu/drm/xe/regs/xe_regs.h | 7 +++++
> drivers/gpu/drm/xe/xe_guc_pc.c | 44 +++++++++++++++++++++++++++++++
> 2 files changed, 51 insertions(+)
>
> diff --git a/drivers/gpu/drm/xe/regs/xe_regs.h b/drivers/gpu/drm/xe/regs/xe_regs.h
> index 8be616a1bd51..bd7b26296402 100644
> --- a/drivers/gpu/drm/xe/regs/xe_regs.h
> +++ b/drivers/gpu/drm/xe/regs/xe_regs.h
> @@ -101,4 +101,11 @@
> #define DSMBASE XE_REG(0x1080C0)
> #define BDSM_MASK REG_GENMASK64(63, 20)
>
> +#define XEHP_PCODE_FREQUENCY_CONFIG 0x6e
> +/* XEHP_PCODE_FREQUENCY_CONFIG sub-commands (param1) */
> +#define PCODE_MBOX_FC_SC_READ_FUSED_P0 0x0
> +#define PCODE_MBOX_FC_SC_READ_FUSED_PN 0x1
> +/* PCODE_MBOX_DOMAIN_* - mailbox domain IDs */
> +#define PCODE_MBOX_DOMAIN_HBM 0x2
> +
> #endif
> diff --git a/drivers/gpu/drm/xe/xe_guc_pc.c b/drivers/gpu/drm/xe/xe_guc_pc.c
> index 67faa9ee0006..1b349ce74c3d 100644
> --- a/drivers/gpu/drm/xe/xe_guc_pc.c
> +++ b/drivers/gpu/drm/xe/xe_guc_pc.c
> @@ -453,6 +453,48 @@ static ssize_t freq_rpn_show(struct device *dev,
> }
> static DEVICE_ATTR_RO(freq_rpn);
>
> +static ssize_t freq_mem_rp0_show(struct device *dev,
> + struct device_attribute *attr, char *buff)
> +{
> + struct kobject *kobj = &dev->kobj;
> + struct xe_gt *gt = kobj_to_gt(kobj);
> + u32 val;
> + int err;
> +
> + err = xe_pcode_read(dev, XEHPSDV_PCODE_FREQUENCY_CONFIG,
> + PCODE_MBOX_FC_SC_READ_FUSED_P0,
> + PCODE_MBOX_DOMAIN_HBM, &val);
> + if (err)
> + return err;
> +
> + /* data_out - Fused P0 for domain ID in units of 50 MHz */
> + val *= GT_FREQUENCY_MULTIPLIER;
> +
> + return sysfs_emit(buff, "%u\n", val);
> +}
> +static DEVICE_ATTR_RO(freq_mem_rp0);
> +
> +static ssize_t freq_mem_rpn_show(struct device *dev,
> + struct device_attribute *attr, char *buff)
> +{
> + struct kobject *kobj = &dev->kobj;
> + struct xe_gt *gt = kobj_to_gt(kobj);
> + u32 val;
> + int err;
> +
> + err = xe_pcode_read(dev, XEHPSDV_PCODE_FREQUENCY_CONFIG,
> + PCODE_MBOX_FC_SC_READ_FUSED_PN,
> + PCODE_MBOX_DOMAIN_HBM, &val);
> + if (err)
> + return err;
> +
> + /* data_out - Fused P0 for domain ID in units of 50 MHz */
> + val *= GT_FREQUENCY_MULTIPLIER;
> +
> + return sysfs_emit(buff, "%u\n", val);
> +}
> +static DEVICE_ATTR_RO(freq_mem_rpn);
> +
> static ssize_t freq_min_show(struct device *dev,
> struct device_attribute *attr, char *buf)
> {
> @@ -631,6 +673,8 @@ static const struct attribute *pc_attrs[] = {
> &dev_attr_freq_rp0.attr,
> &dev_attr_freq_rpe.attr,
> &dev_attr_freq_rpn.attr,
> + &dev_attr_freq_mem_rp0.attr,
> + &dev_attr_freq_mem_rpn.attr,
> &dev_attr_freq_min.attr,
> &dev_attr_freq_max.attr,
> &dev_attr_rc_status.attr,
> --
> 2.39.1
>
next prev parent reply other threads:[~2023-06-06 15:56 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-06-06 8:21 [Intel-xe] [PATCH] [RFC]drm/xe: Sysfs entries to query fused min, max frequency of lmem Sujaritha Sundaresan
2023-06-06 9:25 ` [Intel-xe] ✓ CI.Patch_applied: success for drm/xe: " Patchwork
2023-06-06 9:25 ` [Intel-xe] ✗ CI.checkpatch: warning " Patchwork
2023-06-06 9:26 ` [Intel-xe] ✗ CI.KUnit: failure " Patchwork
2023-06-06 15:56 ` Dixit, Ashutosh [this message]
2023-06-07 3:38 ` [Intel-xe] [PATCH] [RFC]drm/xe: " Sundaresan, Sujaritha
2023-06-07 20:26 ` Dixit, Ashutosh
2023-06-07 4:37 ` Nilawar, Badal
2023-06-07 18:21 ` Matt Roper
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87h6rkmvoa.wl-ashutosh.dixit@intel.com \
--to=ashutosh.dixit@intel.com \
--cc=intel-xe@lists.freedesktop.org \
--cc=sujaritha.sundaresan@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.