* [PATCH v2 0/2] accel/tcg: Test unaligned stores to s390x low-address-protected lowcore
@ 2022-07-22 23:36 Ilya Leoshkevich
2022-07-22 23:36 ` [PATCH v2 1/2] qapi: Add exit-failure PanicAction Ilya Leoshkevich
` (2 more replies)
0 siblings, 3 replies; 8+ messages in thread
From: Ilya Leoshkevich @ 2022-07-22 23:36 UTC (permalink / raw)
To: Richard Henderson, David Hildenbrand, Paolo Bonzini, Eric Blake,
Markus Armbruster
Cc: qemu-s390x, qemu-devel, Christian Borntraeger, Ilya Leoshkevich
Hi,
This is a follow-up series for [1].
The fix has been committed.
I asked Christian what might be a good alternative for the
mmio-debug-exit device for testing, and he suggested to look into
shutdown/panic actions.
Patch 1 adds a new panic action.
Patch 2 tests unaligned stores to s390x low-address-protected lowcore;
it performs a shutdown on success and panic on failure.
Best regards,
Ilya
[1] https://lists.gnu.org/archive/html/qemu-devel/2022-07/msg01876.html
Ilya Leoshkevich (2):
qapi: Add exit-failure PanicAction
tests/tcg/s390x: Test unaligned accesses to lowcore
include/sysemu/sysemu.h | 2 +-
qapi/run-state.json | 4 +++-
qemu-options.hx | 2 +-
softmmu/main.c | 6 ++++--
softmmu/runstate.c | 17 +++++++++++++----
tests/tcg/s390x/Makefile.softmmu-target | 9 +++++++++
tests/tcg/s390x/unaligned-lowcore.S | 19 +++++++++++++++++++
7 files changed, 50 insertions(+), 9 deletions(-)
create mode 100644 tests/tcg/s390x/Makefile.softmmu-target
create mode 100644 tests/tcg/s390x/unaligned-lowcore.S
--
2.35.3
^ permalink raw reply [flat|nested] 8+ messages in thread* [PATCH v2 1/2] qapi: Add exit-failure PanicAction 2022-07-22 23:36 [PATCH v2 0/2] accel/tcg: Test unaligned stores to s390x low-address-protected lowcore Ilya Leoshkevich @ 2022-07-22 23:36 ` Ilya Leoshkevich 2022-07-24 22:27 ` Richard Henderson ` (2 more replies) 2022-07-22 23:36 ` [PATCH v2 2/2] tests/tcg/s390x: Test unaligned accesses to lowcore Ilya Leoshkevich 2022-07-25 12:41 ` [PATCH v2 0/2] accel/tcg: Test unaligned stores to s390x low-address-protected lowcore Alex Bennée 2 siblings, 3 replies; 8+ messages in thread From: Ilya Leoshkevich @ 2022-07-22 23:36 UTC (permalink / raw) To: Richard Henderson, David Hildenbrand, Paolo Bonzini, Eric Blake, Markus Armbruster Cc: qemu-s390x, qemu-devel, Christian Borntraeger, Ilya Leoshkevich Currently QEMU exits with code 0 on both panic an shutdown. For tests it is useful to return 1 on panic, so that it counts as a test failure. Introduce a new exit-failure PanicAction that makes main() return EXIT_FAILURE. Tests can use -action panic=exit-failure option to activate this behavior. Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> --- include/sysemu/sysemu.h | 2 +- qapi/run-state.json | 4 +++- qemu-options.hx | 2 +- softmmu/main.c | 6 ++++-- softmmu/runstate.c | 17 +++++++++++++---- 5 files changed, 22 insertions(+), 9 deletions(-) diff --git a/include/sysemu/sysemu.h b/include/sysemu/sysemu.h index 812f66a31a..31aa45160b 100644 --- a/include/sysemu/sysemu.h +++ b/include/sysemu/sysemu.h @@ -103,7 +103,7 @@ void qemu_boot_set(const char *boot_order, Error **errp); bool defaults_enabled(void); void qemu_init(int argc, char **argv, char **envp); -void qemu_main_loop(void); +int qemu_main_loop(void); void qemu_cleanup(void); extern QemuOptsList qemu_legacy_drive_opts; diff --git a/qapi/run-state.json b/qapi/run-state.json index 6e2162d7b3..d42c370c4f 100644 --- a/qapi/run-state.json +++ b/qapi/run-state.json @@ -364,10 +364,12 @@ # # @shutdown: Shutdown the VM and exit, according to the shutdown action # +# @exit-failure: Shutdown the VM and exit with nonzero status +# # Since: 6.0 ## { 'enum': 'PanicAction', - 'data': [ 'pause', 'shutdown', 'none' ] } + 'data': [ 'pause', 'shutdown', 'exit-failure', 'none' ] } ## # @watchdog-set-action: diff --git a/qemu-options.hx b/qemu-options.hx index 79e00916a1..8e17c5064a 100644 --- a/qemu-options.hx +++ b/qemu-options.hx @@ -4239,7 +4239,7 @@ DEF("action", HAS_ARG, QEMU_OPTION_action, " action when guest reboots [default=reset]\n" "-action shutdown=poweroff|pause\n" " action when guest shuts down [default=poweroff]\n" - "-action panic=pause|shutdown|none\n" + "-action panic=pause|shutdown|exit-failure|none\n" " action when guest panics [default=shutdown]\n" "-action watchdog=reset|shutdown|poweroff|inject-nmi|pause|debug|none\n" " action when watchdog fires [default=reset]\n", diff --git a/softmmu/main.c b/softmmu/main.c index c00432ff09..1b675a8c03 100644 --- a/softmmu/main.c +++ b/softmmu/main.c @@ -32,11 +32,13 @@ int qemu_main(int argc, char **argv, char **envp) { + int status; + qemu_init(argc, argv, envp); - qemu_main_loop(); + status = qemu_main_loop(); qemu_cleanup(); - return 0; + return status; } #ifndef CONFIG_COCOA diff --git a/softmmu/runstate.c b/softmmu/runstate.c index 168e1b78a0..1e68680b9d 100644 --- a/softmmu/runstate.c +++ b/softmmu/runstate.c @@ -482,7 +482,8 @@ void qemu_system_guest_panicked(GuestPanicInformation *info) qapi_event_send_guest_panicked(GUEST_PANIC_ACTION_PAUSE, !!info, info); vm_stop(RUN_STATE_GUEST_PANICKED); - } else if (panic_action == PANIC_ACTION_SHUTDOWN) { + } else if (panic_action == PANIC_ACTION_SHUTDOWN || + panic_action == PANIC_ACTION_EXIT_FAILURE) { qapi_event_send_guest_panicked(GUEST_PANIC_ACTION_POWEROFF, !!info, info); vm_stop(RUN_STATE_GUEST_PANICKED); @@ -662,7 +663,7 @@ void qemu_system_debug_request(void) qemu_notify_event(); } -static bool main_loop_should_exit(void) +static bool main_loop_should_exit(int *status) { RunState r; ShutdownCause request; @@ -680,6 +681,10 @@ static bool main_loop_should_exit(void) if (shutdown_action == SHUTDOWN_ACTION_PAUSE) { vm_stop(RUN_STATE_SHUTDOWN); } else { + if (request == SHUTDOWN_CAUSE_GUEST_PANIC && + panic_action == PANIC_ACTION_EXIT_FAILURE) { + *status = EXIT_FAILURE; + } return true; } } @@ -715,12 +720,14 @@ static bool main_loop_should_exit(void) return false; } -void qemu_main_loop(void) +int qemu_main_loop(void) { + int status = EXIT_SUCCESS; #ifdef CONFIG_PROFILER int64_t ti; #endif - while (!main_loop_should_exit()) { + + while (!main_loop_should_exit(&status)) { #ifdef CONFIG_PROFILER ti = profile_getclock(); #endif @@ -729,6 +736,8 @@ void qemu_main_loop(void) dev_time += profile_getclock() - ti; #endif } + + return status; } void qemu_add_exit_notifier(Notifier *notify) -- 2.35.3 ^ permalink raw reply related [flat|nested] 8+ messages in thread
* Re: [PATCH v2 1/2] qapi: Add exit-failure PanicAction 2022-07-22 23:36 ` [PATCH v2 1/2] qapi: Add exit-failure PanicAction Ilya Leoshkevich @ 2022-07-24 22:27 ` Richard Henderson 2022-07-25 7:34 ` David Hildenbrand 2022-07-25 17:52 ` Eric Blake 2 siblings, 0 replies; 8+ messages in thread From: Richard Henderson @ 2022-07-24 22:27 UTC (permalink / raw) To: Ilya Leoshkevich, David Hildenbrand, Paolo Bonzini, Eric Blake, Markus Armbruster Cc: qemu-s390x, qemu-devel, Christian Borntraeger On 7/23/22 05:06, Ilya Leoshkevich wrote: > Currently QEMU exits with code 0 on both panic an shutdown. For tests > it is useful to return 1 on panic, so that it counts as a test > failure. > > Introduce a new exit-failure PanicAction that makes main() return > EXIT_FAILURE. Tests can use -action panic=exit-failure option to > activate this behavior. > > Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> I like it. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> r~ > --- > include/sysemu/sysemu.h | 2 +- > qapi/run-state.json | 4 +++- > qemu-options.hx | 2 +- > softmmu/main.c | 6 ++++-- > softmmu/runstate.c | 17 +++++++++++++---- > 5 files changed, 22 insertions(+), 9 deletions(-) > > diff --git a/include/sysemu/sysemu.h b/include/sysemu/sysemu.h > index 812f66a31a..31aa45160b 100644 > --- a/include/sysemu/sysemu.h > +++ b/include/sysemu/sysemu.h > @@ -103,7 +103,7 @@ void qemu_boot_set(const char *boot_order, Error **errp); > bool defaults_enabled(void); > > void qemu_init(int argc, char **argv, char **envp); > -void qemu_main_loop(void); > +int qemu_main_loop(void); > void qemu_cleanup(void); > > extern QemuOptsList qemu_legacy_drive_opts; > diff --git a/qapi/run-state.json b/qapi/run-state.json > index 6e2162d7b3..d42c370c4f 100644 > --- a/qapi/run-state.json > +++ b/qapi/run-state.json > @@ -364,10 +364,12 @@ > # > # @shutdown: Shutdown the VM and exit, according to the shutdown action > # > +# @exit-failure: Shutdown the VM and exit with nonzero status > +# > # Since: 6.0 > ## > { 'enum': 'PanicAction', > - 'data': [ 'pause', 'shutdown', 'none' ] } > + 'data': [ 'pause', 'shutdown', 'exit-failure', 'none' ] } > > ## > # @watchdog-set-action: > diff --git a/qemu-options.hx b/qemu-options.hx > index 79e00916a1..8e17c5064a 100644 > --- a/qemu-options.hx > +++ b/qemu-options.hx > @@ -4239,7 +4239,7 @@ DEF("action", HAS_ARG, QEMU_OPTION_action, > " action when guest reboots [default=reset]\n" > "-action shutdown=poweroff|pause\n" > " action when guest shuts down [default=poweroff]\n" > - "-action panic=pause|shutdown|none\n" > + "-action panic=pause|shutdown|exit-failure|none\n" > " action when guest panics [default=shutdown]\n" > "-action watchdog=reset|shutdown|poweroff|inject-nmi|pause|debug|none\n" > " action when watchdog fires [default=reset]\n", > diff --git a/softmmu/main.c b/softmmu/main.c > index c00432ff09..1b675a8c03 100644 > --- a/softmmu/main.c > +++ b/softmmu/main.c > @@ -32,11 +32,13 @@ > > int qemu_main(int argc, char **argv, char **envp) > { > + int status; > + > qemu_init(argc, argv, envp); > - qemu_main_loop(); > + status = qemu_main_loop(); > qemu_cleanup(); > > - return 0; > + return status; > } > > #ifndef CONFIG_COCOA > diff --git a/softmmu/runstate.c b/softmmu/runstate.c > index 168e1b78a0..1e68680b9d 100644 > --- a/softmmu/runstate.c > +++ b/softmmu/runstate.c > @@ -482,7 +482,8 @@ void qemu_system_guest_panicked(GuestPanicInformation *info) > qapi_event_send_guest_panicked(GUEST_PANIC_ACTION_PAUSE, > !!info, info); > vm_stop(RUN_STATE_GUEST_PANICKED); > - } else if (panic_action == PANIC_ACTION_SHUTDOWN) { > + } else if (panic_action == PANIC_ACTION_SHUTDOWN || > + panic_action == PANIC_ACTION_EXIT_FAILURE) { > qapi_event_send_guest_panicked(GUEST_PANIC_ACTION_POWEROFF, > !!info, info); > vm_stop(RUN_STATE_GUEST_PANICKED); > @@ -662,7 +663,7 @@ void qemu_system_debug_request(void) > qemu_notify_event(); > } > > -static bool main_loop_should_exit(void) > +static bool main_loop_should_exit(int *status) > { > RunState r; > ShutdownCause request; > @@ -680,6 +681,10 @@ static bool main_loop_should_exit(void) > if (shutdown_action == SHUTDOWN_ACTION_PAUSE) { > vm_stop(RUN_STATE_SHUTDOWN); > } else { > + if (request == SHUTDOWN_CAUSE_GUEST_PANIC && > + panic_action == PANIC_ACTION_EXIT_FAILURE) { > + *status = EXIT_FAILURE; > + } > return true; > } > } > @@ -715,12 +720,14 @@ static bool main_loop_should_exit(void) > return false; > } > > -void qemu_main_loop(void) > +int qemu_main_loop(void) > { > + int status = EXIT_SUCCESS; > #ifdef CONFIG_PROFILER > int64_t ti; > #endif > - while (!main_loop_should_exit()) { > + > + while (!main_loop_should_exit(&status)) { > #ifdef CONFIG_PROFILER > ti = profile_getclock(); > #endif > @@ -729,6 +736,8 @@ void qemu_main_loop(void) > dev_time += profile_getclock() - ti; > #endif > } > + > + return status; > } > > void qemu_add_exit_notifier(Notifier *notify) ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH v2 1/2] qapi: Add exit-failure PanicAction 2022-07-22 23:36 ` [PATCH v2 1/2] qapi: Add exit-failure PanicAction Ilya Leoshkevich 2022-07-24 22:27 ` Richard Henderson @ 2022-07-25 7:34 ` David Hildenbrand 2022-07-25 17:52 ` Eric Blake 2 siblings, 0 replies; 8+ messages in thread From: David Hildenbrand @ 2022-07-25 7:34 UTC (permalink / raw) To: Ilya Leoshkevich, Richard Henderson, Paolo Bonzini, Eric Blake, Markus Armbruster Cc: qemu-s390x, qemu-devel, Christian Borntraeger On 23.07.22 01:36, Ilya Leoshkevich wrote: > Currently QEMU exits with code 0 on both panic an shutdown. For tests > it is useful to return 1 on panic, so that it counts as a test > failure. > > Introduce a new exit-failure PanicAction that makes main() return > EXIT_FAILURE. Tests can use -action panic=exit-failure option to > activate this behavior. Roughly what I proposed, nice. Reviewed-by: David Hildenbrand <david@redhat.com> -- Thanks, David / dhildenb ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH v2 1/2] qapi: Add exit-failure PanicAction 2022-07-22 23:36 ` [PATCH v2 1/2] qapi: Add exit-failure PanicAction Ilya Leoshkevich 2022-07-24 22:27 ` Richard Henderson 2022-07-25 7:34 ` David Hildenbrand @ 2022-07-25 17:52 ` Eric Blake 2 siblings, 0 replies; 8+ messages in thread From: Eric Blake @ 2022-07-25 17:52 UTC (permalink / raw) To: Ilya Leoshkevich Cc: Richard Henderson, David Hildenbrand, Paolo Bonzini, Markus Armbruster, qemu-s390x, qemu-devel, Christian Borntraeger On Sat, Jul 23, 2022 at 01:36:13AM +0200, Ilya Leoshkevich wrote: > Currently QEMU exits with code 0 on both panic an shutdown. For tests > it is useful to return 1 on panic, so that it counts as a test > failure. > > Introduce a new exit-failure PanicAction that makes main() return > EXIT_FAILURE. Tests can use -action panic=exit-failure option to > activate this behavior. > > Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> > --- > +++ b/qapi/run-state.json > @@ -364,10 +364,12 @@ > # > # @shutdown: Shutdown the VM and exit, according to the shutdown action > # > +# @exit-failure: Shutdown the VM and exit with nonzero status Missing a '(since 7.1)' tag. Otherwise a nice addition. > +# > # Since: 6.0 > ## > { 'enum': 'PanicAction', > - 'data': [ 'pause', 'shutdown', 'none' ] } > + 'data': [ 'pause', 'shutdown', 'exit-failure', 'none' ] } -- Eric Blake, Principal Software Engineer Red Hat, Inc. +1-919-301-3266 Virtualization: qemu.org | libvirt.org ^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH v2 2/2] tests/tcg/s390x: Test unaligned accesses to lowcore 2022-07-22 23:36 [PATCH v2 0/2] accel/tcg: Test unaligned stores to s390x low-address-protected lowcore Ilya Leoshkevich 2022-07-22 23:36 ` [PATCH v2 1/2] qapi: Add exit-failure PanicAction Ilya Leoshkevich @ 2022-07-22 23:36 ` Ilya Leoshkevich 2022-07-24 22:39 ` Richard Henderson 2022-07-25 12:41 ` [PATCH v2 0/2] accel/tcg: Test unaligned stores to s390x low-address-protected lowcore Alex Bennée 2 siblings, 1 reply; 8+ messages in thread From: Ilya Leoshkevich @ 2022-07-22 23:36 UTC (permalink / raw) To: Richard Henderson, David Hildenbrand, Paolo Bonzini, Eric Blake, Markus Armbruster Cc: qemu-s390x, qemu-devel, Christian Borntraeger, Ilya Leoshkevich Add a small test to avoid regressions. Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> --- tests/tcg/s390x/Makefile.softmmu-target | 9 +++++++++ tests/tcg/s390x/unaligned-lowcore.S | 19 +++++++++++++++++++ 2 files changed, 28 insertions(+) create mode 100644 tests/tcg/s390x/Makefile.softmmu-target create mode 100644 tests/tcg/s390x/unaligned-lowcore.S diff --git a/tests/tcg/s390x/Makefile.softmmu-target b/tests/tcg/s390x/Makefile.softmmu-target new file mode 100644 index 0000000000..a34fa68473 --- /dev/null +++ b/tests/tcg/s390x/Makefile.softmmu-target @@ -0,0 +1,9 @@ +S390X_SRC=$(SRC_PATH)/tests/tcg/s390x +VPATH+=$(S390X_SRC) +QEMU_OPTS=-action panic=exit-failure -kernel + +%: %.S + $(CC) -march=z13 -m64 -nostartfiles -static -Wl,-Ttext=0 \ + -Wl,--build-id=none $< -o $@ + +TESTS += unaligned-lowcore diff --git a/tests/tcg/s390x/unaligned-lowcore.S b/tests/tcg/s390x/unaligned-lowcore.S new file mode 100644 index 0000000000..246b517f11 --- /dev/null +++ b/tests/tcg/s390x/unaligned-lowcore.S @@ -0,0 +1,19 @@ + .org 0x1D0 /* program new PSW */ + .quad 0x2000000000000, 0 /* disabled wait */ + .org 0x200 /* lowcore padding */ + + .globl _start +_start: + lctlg %c0,%c0,_c0 + vst %v0,_unaligned + lpswe quiesce_psw + + .align 8 +quiesce_psw: + .quad 0x2000000000000,0xfff /* see is_special_wait_psw() */ +_c0: + .quad 0x10060000 /* lowcore protection, AFP, VX */ + + .byte 0 +_unaligned: + .octa 0 -- 2.35.3 ^ permalink raw reply related [flat|nested] 8+ messages in thread
* Re: [PATCH v2 2/2] tests/tcg/s390x: Test unaligned accesses to lowcore 2022-07-22 23:36 ` [PATCH v2 2/2] tests/tcg/s390x: Test unaligned accesses to lowcore Ilya Leoshkevich @ 2022-07-24 22:39 ` Richard Henderson 0 siblings, 0 replies; 8+ messages in thread From: Richard Henderson @ 2022-07-24 22:39 UTC (permalink / raw) To: Ilya Leoshkevich, David Hildenbrand, Paolo Bonzini, Eric Blake, Markus Armbruster Cc: qemu-s390x, qemu-devel, Christian Borntraeger On 7/23/22 05:06, Ilya Leoshkevich wrote: > Add a small test to avoid regressions. > > Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Acked-by: Richard Henderson <richard.henderson@linaro.org> r~ > --- > tests/tcg/s390x/Makefile.softmmu-target | 9 +++++++++ > tests/tcg/s390x/unaligned-lowcore.S | 19 +++++++++++++++++++ > 2 files changed, 28 insertions(+) > create mode 100644 tests/tcg/s390x/Makefile.softmmu-target > create mode 100644 tests/tcg/s390x/unaligned-lowcore.S > > diff --git a/tests/tcg/s390x/Makefile.softmmu-target b/tests/tcg/s390x/Makefile.softmmu-target > new file mode 100644 > index 0000000000..a34fa68473 > --- /dev/null > +++ b/tests/tcg/s390x/Makefile.softmmu-target > @@ -0,0 +1,9 @@ > +S390X_SRC=$(SRC_PATH)/tests/tcg/s390x > +VPATH+=$(S390X_SRC) > +QEMU_OPTS=-action panic=exit-failure -kernel > + > +%: %.S > + $(CC) -march=z13 -m64 -nostartfiles -static -Wl,-Ttext=0 \ > + -Wl,--build-id=none $< -o $@ > + > +TESTS += unaligned-lowcore > diff --git a/tests/tcg/s390x/unaligned-lowcore.S b/tests/tcg/s390x/unaligned-lowcore.S > new file mode 100644 > index 0000000000..246b517f11 > --- /dev/null > +++ b/tests/tcg/s390x/unaligned-lowcore.S > @@ -0,0 +1,19 @@ > + .org 0x1D0 /* program new PSW */ > + .quad 0x2000000000000, 0 /* disabled wait */ > + .org 0x200 /* lowcore padding */ > + > + .globl _start > +_start: > + lctlg %c0,%c0,_c0 > + vst %v0,_unaligned > + lpswe quiesce_psw > + > + .align 8 > +quiesce_psw: > + .quad 0x2000000000000,0xfff /* see is_special_wait_psw() */ > +_c0: > + .quad 0x10060000 /* lowcore protection, AFP, VX */ > + > + .byte 0 > +_unaligned: > + .octa 0 ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH v2 0/2] accel/tcg: Test unaligned stores to s390x low-address-protected lowcore 2022-07-22 23:36 [PATCH v2 0/2] accel/tcg: Test unaligned stores to s390x low-address-protected lowcore Ilya Leoshkevich 2022-07-22 23:36 ` [PATCH v2 1/2] qapi: Add exit-failure PanicAction Ilya Leoshkevich 2022-07-22 23:36 ` [PATCH v2 2/2] tests/tcg/s390x: Test unaligned accesses to lowcore Ilya Leoshkevich @ 2022-07-25 12:41 ` Alex Bennée 2 siblings, 0 replies; 8+ messages in thread From: Alex Bennée @ 2022-07-25 12:41 UTC (permalink / raw) To: Ilya Leoshkevich Cc: Richard Henderson, David Hildenbrand, Paolo Bonzini, Eric Blake, Markus Armbruster, qemu-s390x, Christian Borntraeger, qemu-devel Ilya Leoshkevich <iii@linux.ibm.com> writes: > Hi, > > This is a follow-up series for [1]. > > The fix has been committed. > > I asked Christian what might be a good alternative for the > mmio-debug-exit device for testing, and he suggested to look into > shutdown/panic actions. > > Patch 1 adds a new panic action. > Patch 2 tests unaligned stores to s390x low-address-protected lowcore; > it performs a shutdown on success and panic on failure. > > Best regards, > Ilya Queued to testing/next, thanks. -- Alex Bennée ^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2022-07-25 17:54 UTC | newest] Thread overview: 8+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2022-07-22 23:36 [PATCH v2 0/2] accel/tcg: Test unaligned stores to s390x low-address-protected lowcore Ilya Leoshkevich 2022-07-22 23:36 ` [PATCH v2 1/2] qapi: Add exit-failure PanicAction Ilya Leoshkevich 2022-07-24 22:27 ` Richard Henderson 2022-07-25 7:34 ` David Hildenbrand 2022-07-25 17:52 ` Eric Blake 2022-07-22 23:36 ` [PATCH v2 2/2] tests/tcg/s390x: Test unaligned accesses to lowcore Ilya Leoshkevich 2022-07-24 22:39 ` Richard Henderson 2022-07-25 12:41 ` [PATCH v2 0/2] accel/tcg: Test unaligned stores to s390x low-address-protected lowcore Alex Bennée
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.