ath10k-firmware: QCA4019 hw1.0: Add EnGenius EMR3500 specific BDFs

ath10k-firmware: QCA4019 hw1.0: Add EnGenius EMR3500 specific BDFs

[frank.shen]

[-- Attachment #1: Type: text/plain, Size: 1222 bytes --]

Hi,

The support for this device was added a while ago to OpenWrt. This AP requires two special BDFs to get the Wi-Fi PHYs working (correctly). The  bmi-board-id='s would clash with one of the the IPQ401X AP-DK boards because QCA doesn't provide special IDs for customers and seems to use the AP-DK board-ids in the wifi firmware to change its behavior.

Now to the questions from the wiki page [1]:

l       description for what hardware this is:
-       it is a IPQ4018 based board
-       one QCA40xx radio is used as 2.4GHz radio
-       one QCA40xx radio is used as 5GHz radio

l       origin of the board file (did you create it yourself or where you downloaded)
-       taken from stock firmware image

l       ids to be used with the board file (ATH10K_BD_IE_BOARD_NAME in ath10k)
-        QCA4019 hw1.0

md5sum of each new board file to add
+ bus=ahb,bmi-chip-id=0,bmi-board-id=16,variant=EnGenius-EMR3500'
md5sum: 0ca46eac922e0f74953bac82eea909e1
+ bus=ahb,bmi-chip-id=0,bmi-board-id=17,variant=EnGenius-EMR3500'
md5sum: a949912fc3b94c16243b2802af54c188


Sincerely,
Frank Shen
Engineer
Research and Development
Senao Networks, Inc.
Tel: +886-3-3289289 ext. 2697
Fax: +886-3-3961112

[-- Attachment #2: bus=ahb,bmi-chip-id=0,bmi-board-id=16,variant=EnGenius-EMR3500.bin --]
[-- Type: application/octet-stream, Size: 12064 bytes --]

[-- Attachment #3: bus=ahb,bmi-chip-id=0,bmi-board-id=17,variant=EnGenius-EMR3500.bin --]
[-- Type: application/octet-stream, Size: 12064 bytes --]

[-- Attachment #4: Type: text/plain, Size: 146 bytes --]

_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

Re: ath10k-firmware: QCA4019 hw1.0: Add EnGenius EMR3500 specific BDFs

[Kalle Valo]

<frank.shen@senao.com> writes:

> The support for this device was added a while ago to OpenWrt. This AP
> requires two special BDFs to get the Wi-Fi PHYs working (correctly).
> The bmi-board-id='s would clash with one of the the IPQ401X AP-DK
> boards because QCA doesn't provide special IDs for customers and seems
> to use the AP-DK board-ids in the wifi firmware to change its
> behavior.
>
> Now to the questions from the wiki page [1]:
>
> l       description for what hardware this is:
> -       it is a IPQ4018 based board
> -       one QCA40xx radio is used as 2.4GHz radio
> -       one QCA40xx radio is used as 5GHz radio
>
> l       origin of the board file (did you create it yourself or where you downloaded)
> -       taken from stock firmware image
>
> l       ids to be used with the board file (ATH10K_BD_IE_BOARD_NAME in ath10k)
> -        QCA4019 hw1.0
>
> md5sum of each new board file to add
> + bus=ahb,bmi-chip-id=0,bmi-board-id=16,variant=EnGenius-EMR3500'
> md5sum: 0ca46eac922e0f74953bac82eea909e1
> + bus=ahb,bmi-chip-id=0,bmi-board-id=17,variant=EnGenius-EMR3500'
> md5sum: a949912fc3b94c16243b2802af54c188

Thanks, added to QCA4019/hw1.0/board-2.bin:

New:
bus=ahb,bmi-chip-id=0,bmi-board-id=17,variant=EnGenius-EMR3500
bus=ahb,bmi-chip-id=0,bmi-board-id=16,variant=EnGenius-EMR3500

Changed:


Deleted:

2 board image(s) added, 0 changed, 0 deleted, 56 in total

https://github.com/kvalo/ath10k-firmware/commit/4f719af2397bfdfa03921933d1df0208fa923d72

-- 
https://patchwork.kernel.org/project/linux-wireless/list/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches

_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k