All of lore.kernel.org
 help / color / mirror / Atom feed
From: gregory.clement@bootlin.com (Gregory CLEMENT)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH net-next v3 0/8] A fix and a few improvements on mvneta
Date: Tue, 24 Jul 2018 15:16:52 +0200	[thread overview]
Message-ID: <87h8ko7ozf.fsf@bootlin.com> (raw)
In-Reply-To: <20180718161057.28704-1-gregory.clement@bootlin.com> (Gregory CLEMENT's message of "Wed, 18 Jul 2018 18:10:49 +0200")

Hi David,
 
 On mer., juil. 18 2018, Gregory CLEMENT <gregory.clement@bootlin.com> wrote:

> Hello,
>
> This series brings some improvements for the mvneta driver and also
> adds a fix.
>
> Compared to the v2, the main change is another patch fixing a bug
> in mtu_change.
>

I saw in patchwork, the status was "Accepted" (for example the 1st patch
[1]). However the series is not in your git branches and usually you
also answered to the series to inform that you have applied it. So I
would like to know what is the status of the series.

Thanks,

Gregory


[1]: https://patchwork.ozlabs.org/patch/945807/

> Gregory
>
> Changelog:
> v1 -> v2
>
>  - In patch 2, use EXPORT_SYMBOL_GPL for mvneta_bm_get and
>    mvneta_bm_put to be used in module, reported by kbuild test robot.
>
>  - In patch 4, add the counter to the driver's ethtool state,
>    suggested by David Miller.
>
>  - In patch 6, use a single if, suggested by Marcin Wojtas
>
> v2 -> v3
>
>  - Adding a patch fixing the mtu change issue
>
>  - Removing the inline keyword for mvneta_rx_refill() and let the
>    comiler decided, suggested by David Miller.
>
> Andrew Lunn (1):
>   net: ethernet: mvneta: Fix napi structure mixup on armada 3700
>
> Gregory CLEMENT (3):
>   net: mvneta: remove data pointer usage from device_node structure
>   net: mvneta: discriminate error cause for missed packet
>   net: mvneta: Allocate page for the descriptor
>
> Yelena Krivosheev (4):
>   net: mvneta: fix mtu change on port without link
>   net: mvneta: increase number of buffers in RX and TX queue
>   net: mvneta: Verify hardware checksum only when offload checksum
>     feature is set
>   net: mvneta: Improve the buffer allocation method for SWBM
>
>  drivers/net/ethernet/marvell/mvneta.c    | 409 ++++++++++++++---------
>  drivers/net/ethernet/marvell/mvneta_bm.c |  15 +
>  drivers/net/ethernet/marvell/mvneta_bm.h |   8 +-
>  3 files changed, 272 insertions(+), 160 deletions(-)
>
> -- 
> 2.18.0
>

-- 
Gregory Clement, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
http://bootlin.com

WARNING: multiple messages have this Message-ID (diff)
From: Gregory CLEMENT <gregory.clement@bootlin.com>
To: "David S. Miller" <davem@davemloft.net>
Cc: linux-kernel@vger.kernel.org, netdev@vger.kernel.org,
	"Thomas Petazzoni" <thomas.petazzoni@bootlin.com>,
	linux-arm-kernel@lists.infradead.org,
	"Jason Cooper" <jason@lakedaemon.net>,
	"Andrew Lunn" <andrew@lunn.ch>,
	"Sebastian Hesselbarth" <sebastian.hesselbarth@gmail.com>,
	"Yelena Krivosheev" <yelena@marvell.com>,
	"Nadav Haklai" <nadavh@marvell.com>,
	"Marcin Wojtas" <mw@semihalf.com>,
	"Dmitri Epshtein" <dima@marvell.com>,
	"Antoine Tenart" <antoine.tenart@bootlin.com>,
	"Miquèl Raynal" <miquel.raynal@bootlin.com>,
	"Maxime Chevallier" <maxime.chevallier@bootlin.com>
Subject: Re: [PATCH net-next v3 0/8] A fix and a few improvements on mvneta
Date: Tue, 24 Jul 2018 15:16:52 +0200	[thread overview]
Message-ID: <87h8ko7ozf.fsf@bootlin.com> (raw)
In-Reply-To: <20180718161057.28704-1-gregory.clement@bootlin.com> (Gregory CLEMENT's message of "Wed, 18 Jul 2018 18:10:49 +0200")

Hi David,
 
 On mer., juil. 18 2018, Gregory CLEMENT <gregory.clement@bootlin.com> wrote:

> Hello,
>
> This series brings some improvements for the mvneta driver and also
> adds a fix.
>
> Compared to the v2, the main change is another patch fixing a bug
> in mtu_change.
>

I saw in patchwork, the status was "Accepted" (for example the 1st patch
[1]). However the series is not in your git branches and usually you
also answered to the series to inform that you have applied it. So I
would like to know what is the status of the series.

Thanks,

Gregory


[1]: https://patchwork.ozlabs.org/patch/945807/

> Gregory
>
> Changelog:
> v1 -> v2
>
>  - In patch 2, use EXPORT_SYMBOL_GPL for mvneta_bm_get and
>    mvneta_bm_put to be used in module, reported by kbuild test robot.
>
>  - In patch 4, add the counter to the driver's ethtool state,
>    suggested by David Miller.
>
>  - In patch 6, use a single if, suggested by Marcin Wojtas
>
> v2 -> v3
>
>  - Adding a patch fixing the mtu change issue
>
>  - Removing the inline keyword for mvneta_rx_refill() and let the
>    comiler decided, suggested by David Miller.
>
> Andrew Lunn (1):
>   net: ethernet: mvneta: Fix napi structure mixup on armada 3700
>
> Gregory CLEMENT (3):
>   net: mvneta: remove data pointer usage from device_node structure
>   net: mvneta: discriminate error cause for missed packet
>   net: mvneta: Allocate page for the descriptor
>
> Yelena Krivosheev (4):
>   net: mvneta: fix mtu change on port without link
>   net: mvneta: increase number of buffers in RX and TX queue
>   net: mvneta: Verify hardware checksum only when offload checksum
>     feature is set
>   net: mvneta: Improve the buffer allocation method for SWBM
>
>  drivers/net/ethernet/marvell/mvneta.c    | 409 ++++++++++++++---------
>  drivers/net/ethernet/marvell/mvneta_bm.c |  15 +
>  drivers/net/ethernet/marvell/mvneta_bm.h |   8 +-
>  3 files changed, 272 insertions(+), 160 deletions(-)
>
> -- 
> 2.18.0
>

-- 
Gregory Clement, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
http://bootlin.com

  parent reply	other threads:[~2018-07-24 13:16 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-07-18 16:10 [PATCH net-next v3 0/8] A fix and a few improvements on mvneta Gregory CLEMENT
2018-07-18 16:10 ` Gregory CLEMENT
2018-07-18 16:10 ` [PATCH net-next v3 1/8] net: ethernet: mvneta: Fix napi structure mixup on armada 3700 Gregory CLEMENT
2018-07-18 16:10   ` Gregory CLEMENT
2018-07-18 16:10 ` [PATCH net-next v3 2/8] net: mvneta: fix mtu change on port without link Gregory CLEMENT
2018-07-18 16:10   ` Gregory CLEMENT
2018-07-18 16:10 ` [PATCH net-next v3 3/8] net: mvneta: remove data pointer usage from device_node structure Gregory CLEMENT
2018-07-18 16:10   ` Gregory CLEMENT
2018-07-18 16:10 ` [PATCH net-next v3 4/8] net: mvneta: increase number of buffers in RX and TX queue Gregory CLEMENT
2018-07-18 16:10   ` Gregory CLEMENT
2018-07-18 16:10 ` [PATCH net-next v3 5/8] net: mvneta: discriminate error cause for missed packet Gregory CLEMENT
2018-07-18 16:10   ` Gregory CLEMENT
2018-07-18 16:10 ` [PATCH net-next v3 6/8] net: mvneta: Allocate page for the descriptor Gregory CLEMENT
2018-07-18 16:10   ` Gregory CLEMENT
2018-07-18 16:10 ` [PATCH net-next v3 7/8] net: mvneta: Verify hardware checksum only when offload checksum feature is set Gregory CLEMENT
2018-07-18 16:10   ` Gregory CLEMENT
2018-07-18 16:10 ` [PATCH net-next v3 8/8] net: mvneta: Improve the buffer allocation method for SWBM Gregory CLEMENT
2018-07-18 16:10   ` Gregory CLEMENT
2018-07-24 13:16 ` Gregory CLEMENT [this message]
2018-07-24 13:16   ` [PATCH net-next v3 0/8] A fix and a few improvements on mvneta Gregory CLEMENT
2018-07-24 16:50   ` David Miller
2018-07-24 16:50     ` David Miller
2018-07-29  5:14   ` David Miller
2018-07-29  5:14     ` David Miller
2018-07-29  5:14     ` David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=87h8ko7ozf.fsf@bootlin.com \
    --to=gregory.clement@bootlin.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.