All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
To: Alexander Graf <agraf@suse.de>, kvm-ppc@vger.kernel.org
Cc: kvm@vger.kernel.org
Subject: Re: [PATCH 6/7] KVM: PPC: Book3S HV: Fix ABIv2 on LE
Date: Wed, 18 Jun 2014 15:33:46 +0000	[thread overview]
Message-ID: <87ha3ickfp.fsf@linux.vnet.ibm.com> (raw)
In-Reply-To: <1403021847-57177-7-git-send-email-agraf@suse.de>

Alexander Graf <agraf@suse.de> writes:

> We use ABIv2 on Little Endian systems which gets rid of the dotted function
> names. Branch to the actual functions when we see such a system.
>
> Signed-off-by: Alexander Graf <agraf@suse.de>

As per patches sent by anton we don't need this. We can branch to the
function rathen than the dot symbol

http://article.gmane.org/gmane.linux.ports.ppc.embedded/68925
http://article.gmane.org/gmane.linux.ports.ppc.embedded/71005

-aneesh

> ---
>  arch/powerpc/kvm/book3s_hv_rmhandlers.S | 22 ++++++++++++++--------
>  1 file changed, 14 insertions(+), 8 deletions(-)
>
> diff --git a/arch/powerpc/kvm/book3s_hv_rmhandlers.S b/arch/powerpc/kvm/book3s_hv_rmhandlers.S
> index 1a71f60..1ff3ebd 100644
> --- a/arch/powerpc/kvm/book3s_hv_rmhandlers.S
> +++ b/arch/powerpc/kvm/book3s_hv_rmhandlers.S
> @@ -36,6 +36,12 @@
>  #define NAPPING_CEDE	1
>  #define NAPPING_NOVCPU	2
>  
> +#if defined(_CALL_ELF) && _CALL_ELF = 2
> +#define FUNC(name) 		name
> +#else
> +#define FUNC(name) 		GLUE(.,name)
> +#endif
> +
>  /*
>   * Call kvmppc_hv_entry in real mode.
>   * Must be called with interrupts hard-disabled.
> @@ -668,9 +674,9 @@ END_FTR_SECTION_IFCLR(CPU_FTR_TM)
>  
>  	mr	r31, r4
>  	addi	r3, r31, VCPU_FPRS_TM
> -	bl	.load_fp_state
> +	bl	FUNC(load_fp_state)
>  	addi	r3, r31, VCPU_VRS_TM
> -	bl	.load_vr_state
> +	bl	FUNC(load_vr_state)
>  	mr	r4, r31
>  	lwz	r7, VCPU_VRSAVE_TM(r4)
>  	mtspr	SPRN_VRSAVE, r7
> @@ -1414,9 +1420,9 @@ END_FTR_SECTION_IFCLR(CPU_FTR_TM)
>  
>  	/* Save FP/VSX. */
>  	addi	r3, r9, VCPU_FPRS_TM
> -	bl	.store_fp_state
> +	bl	FUNC(store_fp_state)
>  	addi	r3, r9, VCPU_VRS_TM
> -	bl	.store_vr_state
> +	bl	FUNC(store_vr_state)
>  	mfspr	r6, SPRN_VRSAVE
>  	stw	r6, VCPU_VRSAVE_TM(r9)
>  1:
> @@ -2405,11 +2411,11 @@ END_FTR_SECTION_IFSET(CPU_FTR_VSX)
>  	mtmsrd	r8
>  	isync
>  	addi	r3,r3,VCPU_FPRS
> -	bl	.store_fp_state
> +	bl	FUNC(store_fp_state)
>  #ifdef CONFIG_ALTIVEC
>  BEGIN_FTR_SECTION
>  	addi	r3,r31,VCPU_VRS
> -	bl	.store_vr_state
> +	bl	FUNC(store_vr_state)
>  END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
>  #endif
>  	mfspr	r6,SPRN_VRSAVE
> @@ -2441,11 +2447,11 @@ END_FTR_SECTION_IFSET(CPU_FTR_VSX)
>  	mtmsrd	r8
>  	isync
>  	addi	r3,r4,VCPU_FPRS
> -	bl	.load_fp_state
> +	bl	FUNC(load_fp_state)
>  #ifdef CONFIG_ALTIVEC
>  BEGIN_FTR_SECTION
>  	addi	r3,r31,VCPU_VRS
> -	bl	.load_vr_state
> +	bl	FUNC(load_vr_state)
>  END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
>  #endif
>  	lwz	r7,VCPU_VRSAVE(r31)

-aneesh


WARNING: multiple messages have this Message-ID (diff)
From: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
To: Alexander Graf <agraf@suse.de>, kvm-ppc@vger.kernel.org
Cc: kvm@vger.kernel.org
Subject: Re: [PATCH 6/7] KVM: PPC: Book3S HV: Fix ABIv2 on LE
Date: Wed, 18 Jun 2014 20:51:46 +0530	[thread overview]
Message-ID: <87ha3ickfp.fsf@linux.vnet.ibm.com> (raw)
In-Reply-To: <1403021847-57177-7-git-send-email-agraf@suse.de>

Alexander Graf <agraf@suse.de> writes:

> We use ABIv2 on Little Endian systems which gets rid of the dotted function
> names. Branch to the actual functions when we see such a system.
>
> Signed-off-by: Alexander Graf <agraf@suse.de>

As per patches sent by anton we don't need this. We can branch to the
function rathen than the dot symbol

http://article.gmane.org/gmane.linux.ports.ppc.embedded/68925
http://article.gmane.org/gmane.linux.ports.ppc.embedded/71005

-aneesh

> ---
>  arch/powerpc/kvm/book3s_hv_rmhandlers.S | 22 ++++++++++++++--------
>  1 file changed, 14 insertions(+), 8 deletions(-)
>
> diff --git a/arch/powerpc/kvm/book3s_hv_rmhandlers.S b/arch/powerpc/kvm/book3s_hv_rmhandlers.S
> index 1a71f60..1ff3ebd 100644
> --- a/arch/powerpc/kvm/book3s_hv_rmhandlers.S
> +++ b/arch/powerpc/kvm/book3s_hv_rmhandlers.S
> @@ -36,6 +36,12 @@
>  #define NAPPING_CEDE	1
>  #define NAPPING_NOVCPU	2
>  
> +#if defined(_CALL_ELF) && _CALL_ELF == 2
> +#define FUNC(name) 		name
> +#else
> +#define FUNC(name) 		GLUE(.,name)
> +#endif
> +
>  /*
>   * Call kvmppc_hv_entry in real mode.
>   * Must be called with interrupts hard-disabled.
> @@ -668,9 +674,9 @@ END_FTR_SECTION_IFCLR(CPU_FTR_TM)
>  
>  	mr	r31, r4
>  	addi	r3, r31, VCPU_FPRS_TM
> -	bl	.load_fp_state
> +	bl	FUNC(load_fp_state)
>  	addi	r3, r31, VCPU_VRS_TM
> -	bl	.load_vr_state
> +	bl	FUNC(load_vr_state)
>  	mr	r4, r31
>  	lwz	r7, VCPU_VRSAVE_TM(r4)
>  	mtspr	SPRN_VRSAVE, r7
> @@ -1414,9 +1420,9 @@ END_FTR_SECTION_IFCLR(CPU_FTR_TM)
>  
>  	/* Save FP/VSX. */
>  	addi	r3, r9, VCPU_FPRS_TM
> -	bl	.store_fp_state
> +	bl	FUNC(store_fp_state)
>  	addi	r3, r9, VCPU_VRS_TM
> -	bl	.store_vr_state
> +	bl	FUNC(store_vr_state)
>  	mfspr	r6, SPRN_VRSAVE
>  	stw	r6, VCPU_VRSAVE_TM(r9)
>  1:
> @@ -2405,11 +2411,11 @@ END_FTR_SECTION_IFSET(CPU_FTR_VSX)
>  	mtmsrd	r8
>  	isync
>  	addi	r3,r3,VCPU_FPRS
> -	bl	.store_fp_state
> +	bl	FUNC(store_fp_state)
>  #ifdef CONFIG_ALTIVEC
>  BEGIN_FTR_SECTION
>  	addi	r3,r31,VCPU_VRS
> -	bl	.store_vr_state
> +	bl	FUNC(store_vr_state)
>  END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
>  #endif
>  	mfspr	r6,SPRN_VRSAVE
> @@ -2441,11 +2447,11 @@ END_FTR_SECTION_IFSET(CPU_FTR_VSX)
>  	mtmsrd	r8
>  	isync
>  	addi	r3,r4,VCPU_FPRS
> -	bl	.load_fp_state
> +	bl	FUNC(load_fp_state)
>  #ifdef CONFIG_ALTIVEC
>  BEGIN_FTR_SECTION
>  	addi	r3,r31,VCPU_VRS
> -	bl	.load_vr_state
> +	bl	FUNC(load_vr_state)
>  END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
>  #endif
>  	lwz	r7,VCPU_VRSAVE(r31)

-aneesh

  reply	other threads:[~2014-06-18 15:33 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-06-17 16:17 [PATCH 0/7] KVM: PPC: Book3S HV: Enable on little endian hosts Alexander Graf
2014-06-17 16:17 ` Alexander Graf
2014-06-17 16:17 ` [PATCH 1/7] PPC: Add asm helpers for BE 32bit load/store Alexander Graf
2014-06-17 16:17   ` Alexander Graf
2014-06-17 16:17 ` [PATCH 2/7] KVM: PPC: Book3S HV: Make HTAB code LE host aware Alexander Graf
2014-06-17 16:17   ` Alexander Graf
2014-06-17 16:17 ` [PATCH 3/7] KVM: PPC: Book3S HV: Access guest VPA in BE Alexander Graf
2014-06-17 16:17   ` Alexander Graf
2014-06-17 16:17 ` [PATCH 4/7] KVM: PPC: Book3S HV: Access host lppaca and shadow slb " Alexander Graf
2014-06-17 16:17   ` Alexander Graf
2014-06-17 16:17 ` [PATCH 5/7] KVM: PPC: Book3S HV: Access XICS " Alexander Graf
2014-06-17 16:17   ` Alexander Graf
2014-06-17 16:17 ` [PATCH 6/7] KVM: PPC: Book3S HV: Fix ABIv2 on LE Alexander Graf
2014-06-17 16:17   ` Alexander Graf
2014-06-18 15:21   ` Aneesh Kumar K.V [this message]
2014-06-18 15:33     ` Aneesh Kumar K.V
2014-06-18 15:23     ` Alexander Graf
2014-06-18 15:23       ` Alexander Graf
2014-06-24 13:34       ` [PATCH v3 " Alexander Graf
2014-06-24 13:34         ` Alexander Graf
2014-06-17 16:17 ` [PATCH 7/7] KVM: PPC: Book3S HV: Enable for little endian hosts Alexander Graf
2014-06-17 16:17   ` Alexander Graf
2014-07-04  7:41 ` [PATCH 0/7] KVM: PPC: Book3S HV: Enable on " Alexander Graf
2014-07-04  7:41   ` Alexander Graf

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=87ha3ickfp.fsf@linux.vnet.ibm.com \
    --to=aneesh.kumar@linux.vnet.ibm.com \
    --cc=agraf@suse.de \
    --cc=kvm-ppc@vger.kernel.org \
    --cc=kvm@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.