From: Gregory CLEMENT <gregory.clement@bootlin.com>
To: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>,
Andrew Lunn <andrew@lunn.ch>,
Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Subject: Re: [PATCH] ARM: dts: armada: align LED node names with dtschema
Date: Mon, 28 Nov 2022 01:16:05 +0100 [thread overview]
Message-ID: <87ilj07x2y.fsf@BL-laptop> (raw)
In-Reply-To: <20221125144133.477116-1-krzysztof.kozlowski@linaro.org>
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> writes:
> The node names should be generic and DT schema expects certain pattern:
>
> armada-370-seagate-personal-cloud.dtb: gpio-leds: 'red-sata0' does not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+'
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Applied on mvebu/dt
Thanks,
Gregory
> ---
> arch/arm/boot/dts/armada-370-dlink-dns327l.dts | 6 +++---
> arch/arm/boot/dts/armada-370-seagate-nas-4bay.dts | 4 ++--
> arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi | 8 ++++----
> arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi | 2 +-
> arch/arm/boot/dts/armada-385-linksys-caiman.dts | 4 ++--
> arch/arm/boot/dts/armada-385-linksys-cobra.dts | 4 ++--
> arch/arm/boot/dts/armada-385-linksys-rango.dts | 8 ++++----
> arch/arm/boot/dts/armada-385-linksys-shelby.dts | 4 ++--
> arch/arm/boot/dts/armada-385-linksys.dtsi | 4 ++--
> arch/arm/boot/dts/armada-385-synology-ds116.dts | 2 +-
> arch/arm/boot/dts/armada-xp-linksys-mamba.dts | 2 +-
> 11 files changed, 24 insertions(+), 24 deletions(-)
>
> diff --git a/arch/arm/boot/dts/armada-370-dlink-dns327l.dts b/arch/arm/boot/dts/armada-370-dlink-dns327l.dts
> index 2008c6eaaa52..561195b749eb 100644
> --- a/arch/arm/boot/dts/armada-370-dlink-dns327l.dts
> +++ b/arch/arm/boot/dts/armada-370-dlink-dns327l.dts
> @@ -86,19 +86,19 @@ &sata_l_white_pin
>
> pinctrl-names = "default";
>
> - sata-r-amber-pin {
> + led-sata-r-amber {
> label = "dns327l:amber:sata-r";
> gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>;
> default-state = "keep";
> };
>
> - sata-l-amber-pin {
> + led-sata-l-amber {
> label = "dns327l:amber:sata-l";
> gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
> default-state = "keep";
> };
>
> - backup-led-pin {
> + led-backup {
> label = "dns327l:white:usb";
> gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
> default-state = "keep";
> diff --git a/arch/arm/boot/dts/armada-370-seagate-nas-4bay.dts b/arch/arm/boot/dts/armada-370-seagate-nas-4bay.dts
> index 3cf70c72c5ca..9cb69999b1db 100644
> --- a/arch/arm/boot/dts/armada-370-seagate-nas-4bay.dts
> +++ b/arch/arm/boot/dts/armada-370-seagate-nas-4bay.dts
> @@ -72,11 +72,11 @@ regulator@4 {
> };
>
> gpio-leds {
> - red-sata2 {
> + led-red-sata2 {
> label = "dart:red:sata2";
> gpios = <&pca9554 0 GPIO_ACTIVE_LOW>;
> };
> - red-sata3 {
> + led-red-sata3 {
> label = "dart:red:sata3";
> gpios = <&pca9554 3 GPIO_ACTIVE_LOW>;
> };
> diff --git a/arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi b/arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi
> index 866b8630d407..822f10734946 100644
> --- a/arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi
> +++ b/arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi
> @@ -132,21 +132,21 @@ button-reset {
> gpio-leds {
> compatible = "gpio-leds";
>
> - white-power {
> + led-white-power {
> label = "dart:white:power";
> gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
> linux,default-trigger = "timer";
>
> };
> - red-power {
> + led-red-power {
> label = "dart:red:power";
> gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>;
> };
> - red-sata0 {
> + led-red-sata0 {
> label = "dart:red:sata0";
> gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
> };
> - red-sata1 {
> + led-red-sata1 {
> label = "dart:red:sata1";
> gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
> };
> diff --git a/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi b/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi
> index 702a85af2078..124a8ba279e3 100644
> --- a/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi
> +++ b/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi
> @@ -107,7 +107,7 @@ button-usb {
> gpio-leds {
> compatible = "gpio-leds";
>
> - red-sata0 {
> + led-red-sata0 {
> label = "cumulus:red:sata0";
> gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
> default-state = "off";
> diff --git a/arch/arm/boot/dts/armada-385-linksys-caiman.dts b/arch/arm/boot/dts/armada-385-linksys-caiman.dts
> index a03050c97084..88b2921fed55 100644
> --- a/arch/arm/boot/dts/armada-385-linksys-caiman.dts
> +++ b/arch/arm/boot/dts/armada-385-linksys-caiman.dts
> @@ -62,11 +62,11 @@ wps_amber@9 {
> };
>
> &gpio_leds {
> - power {
> + led-power {
> label = "caiman:white:power";
> };
>
> - sata {
> + led-sata {
> label = "caiman:white:sata";
> };
> };
> diff --git a/arch/arm/boot/dts/armada-385-linksys-cobra.dts b/arch/arm/boot/dts/armada-385-linksys-cobra.dts
> index e3e4877a6f49..88200f930d0d 100644
> --- a/arch/arm/boot/dts/armada-385-linksys-cobra.dts
> +++ b/arch/arm/boot/dts/armada-385-linksys-cobra.dts
> @@ -62,11 +62,11 @@ wps_amber@9 {
> };
>
> &gpio_leds {
> - power {
> + led-power {
> label = "cobra:white:power";
> };
>
> - sata {
> + led-sata {
> label = "cobra:white:sata";
> };
> };
> diff --git a/arch/arm/boot/dts/armada-385-linksys-rango.dts b/arch/arm/boot/dts/armada-385-linksys-rango.dts
> index 3c4af57ec2b9..4ab45f294de2 100644
> --- a/arch/arm/boot/dts/armada-385-linksys-rango.dts
> +++ b/arch/arm/boot/dts/armada-385-linksys-rango.dts
> @@ -54,22 +54,22 @@ wps_amber@9 {
> };
>
> &gpio_leds {
> - power {
> + led-power {
> gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
> label = "rango:white:power";
> };
>
> - sata {
> + led-sata {
> gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
> label = "rango:white:sata";
> };
>
> - wlan_2g {
> + led-wlan_2g {
> gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
> label = "rango:white:wlan_2g";
> };
>
> - wlan_5g {
> + led-wlan_5g {
> gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
> label = "rango:white:wlan_5g";
> };
> diff --git a/arch/arm/boot/dts/armada-385-linksys-shelby.dts b/arch/arm/boot/dts/armada-385-linksys-shelby.dts
> index 3451cd3e5dff..f1b1f22413f1 100644
> --- a/arch/arm/boot/dts/armada-385-linksys-shelby.dts
> +++ b/arch/arm/boot/dts/armada-385-linksys-shelby.dts
> @@ -62,11 +62,11 @@ wps_amber@9 {
> };
>
> &gpio_leds {
> - power {
> + led-power {
> label = "shelby:white:power";
> };
>
> - sata {
> + led-sata {
> label = "shelby:white:sata";
> };
> };
> diff --git a/arch/arm/boot/dts/armada-385-linksys.dtsi b/arch/arm/boot/dts/armada-385-linksys.dtsi
> index 116aca5e688f..85e8d966f6c1 100644
> --- a/arch/arm/boot/dts/armada-385-linksys.dtsi
> +++ b/arch/arm/boot/dts/armada-385-linksys.dtsi
> @@ -71,12 +71,12 @@ gpio_leds: gpio-leds {
> pinctrl-0 = <&gpio_leds_pins>;
> pinctrl-names = "default";
>
> - power {
> + led-power {
> gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
> default-state = "on";
> };
>
> - sata {
> + led-sata {
> gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;
> default-state = "off";
> linux,default-trigger = "disk-activity";
> diff --git a/arch/arm/boot/dts/armada-385-synology-ds116.dts b/arch/arm/boot/dts/armada-385-synology-ds116.dts
> index 2622af73c9da..ea91ff964d94 100644
> --- a/arch/arm/boot/dts/armada-385-synology-ds116.dts
> +++ b/arch/arm/boot/dts/armada-385-synology-ds116.dts
> @@ -149,7 +149,7 @@ gpio-leds {
> * sata0, and accesses to SATA disk 0 make it blink so it
> * doesn't need to be declared here.
> */
> - orange {
> + led-orange {
> gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
> label = "ds116:orange:disk";
> default-state = "off";
> diff --git a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
> index 622ac40dd164..dbe8dfe236fb 100644
> --- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
> +++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
> @@ -195,7 +195,7 @@ gpio-leds {
> pinctrl-0 = <&power_led_pin>;
> pinctrl-names = "default";
>
> - power {
> + led-power {
> label = "mamba:white:power";
> gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
> default-state = "on";
> --
> 2.34.1
>
--
Gregory Clement, Bootlin
Embedded Linux and Kernel engineering
http://bootlin.com
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: Gregory CLEMENT <gregory.clement@bootlin.com>
To: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>,
Andrew Lunn <andrew@lunn.ch>,
Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Subject: Re: [PATCH] ARM: dts: armada: align LED node names with dtschema
Date: Mon, 28 Nov 2022 01:16:05 +0100 [thread overview]
Message-ID: <87ilj07x2y.fsf@BL-laptop> (raw)
In-Reply-To: <20221125144133.477116-1-krzysztof.kozlowski@linaro.org>
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> writes:
> The node names should be generic and DT schema expects certain pattern:
>
> armada-370-seagate-personal-cloud.dtb: gpio-leds: 'red-sata0' does not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+'
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Applied on mvebu/dt
Thanks,
Gregory
> ---
> arch/arm/boot/dts/armada-370-dlink-dns327l.dts | 6 +++---
> arch/arm/boot/dts/armada-370-seagate-nas-4bay.dts | 4 ++--
> arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi | 8 ++++----
> arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi | 2 +-
> arch/arm/boot/dts/armada-385-linksys-caiman.dts | 4 ++--
> arch/arm/boot/dts/armada-385-linksys-cobra.dts | 4 ++--
> arch/arm/boot/dts/armada-385-linksys-rango.dts | 8 ++++----
> arch/arm/boot/dts/armada-385-linksys-shelby.dts | 4 ++--
> arch/arm/boot/dts/armada-385-linksys.dtsi | 4 ++--
> arch/arm/boot/dts/armada-385-synology-ds116.dts | 2 +-
> arch/arm/boot/dts/armada-xp-linksys-mamba.dts | 2 +-
> 11 files changed, 24 insertions(+), 24 deletions(-)
>
> diff --git a/arch/arm/boot/dts/armada-370-dlink-dns327l.dts b/arch/arm/boot/dts/armada-370-dlink-dns327l.dts
> index 2008c6eaaa52..561195b749eb 100644
> --- a/arch/arm/boot/dts/armada-370-dlink-dns327l.dts
> +++ b/arch/arm/boot/dts/armada-370-dlink-dns327l.dts
> @@ -86,19 +86,19 @@ &sata_l_white_pin
>
> pinctrl-names = "default";
>
> - sata-r-amber-pin {
> + led-sata-r-amber {
> label = "dns327l:amber:sata-r";
> gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>;
> default-state = "keep";
> };
>
> - sata-l-amber-pin {
> + led-sata-l-amber {
> label = "dns327l:amber:sata-l";
> gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
> default-state = "keep";
> };
>
> - backup-led-pin {
> + led-backup {
> label = "dns327l:white:usb";
> gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
> default-state = "keep";
> diff --git a/arch/arm/boot/dts/armada-370-seagate-nas-4bay.dts b/arch/arm/boot/dts/armada-370-seagate-nas-4bay.dts
> index 3cf70c72c5ca..9cb69999b1db 100644
> --- a/arch/arm/boot/dts/armada-370-seagate-nas-4bay.dts
> +++ b/arch/arm/boot/dts/armada-370-seagate-nas-4bay.dts
> @@ -72,11 +72,11 @@ regulator@4 {
> };
>
> gpio-leds {
> - red-sata2 {
> + led-red-sata2 {
> label = "dart:red:sata2";
> gpios = <&pca9554 0 GPIO_ACTIVE_LOW>;
> };
> - red-sata3 {
> + led-red-sata3 {
> label = "dart:red:sata3";
> gpios = <&pca9554 3 GPIO_ACTIVE_LOW>;
> };
> diff --git a/arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi b/arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi
> index 866b8630d407..822f10734946 100644
> --- a/arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi
> +++ b/arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi
> @@ -132,21 +132,21 @@ button-reset {
> gpio-leds {
> compatible = "gpio-leds";
>
> - white-power {
> + led-white-power {
> label = "dart:white:power";
> gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
> linux,default-trigger = "timer";
>
> };
> - red-power {
> + led-red-power {
> label = "dart:red:power";
> gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>;
> };
> - red-sata0 {
> + led-red-sata0 {
> label = "dart:red:sata0";
> gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
> };
> - red-sata1 {
> + led-red-sata1 {
> label = "dart:red:sata1";
> gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
> };
> diff --git a/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi b/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi
> index 702a85af2078..124a8ba279e3 100644
> --- a/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi
> +++ b/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi
> @@ -107,7 +107,7 @@ button-usb {
> gpio-leds {
> compatible = "gpio-leds";
>
> - red-sata0 {
> + led-red-sata0 {
> label = "cumulus:red:sata0";
> gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
> default-state = "off";
> diff --git a/arch/arm/boot/dts/armada-385-linksys-caiman.dts b/arch/arm/boot/dts/armada-385-linksys-caiman.dts
> index a03050c97084..88b2921fed55 100644
> --- a/arch/arm/boot/dts/armada-385-linksys-caiman.dts
> +++ b/arch/arm/boot/dts/armada-385-linksys-caiman.dts
> @@ -62,11 +62,11 @@ wps_amber@9 {
> };
>
> &gpio_leds {
> - power {
> + led-power {
> label = "caiman:white:power";
> };
>
> - sata {
> + led-sata {
> label = "caiman:white:sata";
> };
> };
> diff --git a/arch/arm/boot/dts/armada-385-linksys-cobra.dts b/arch/arm/boot/dts/armada-385-linksys-cobra.dts
> index e3e4877a6f49..88200f930d0d 100644
> --- a/arch/arm/boot/dts/armada-385-linksys-cobra.dts
> +++ b/arch/arm/boot/dts/armada-385-linksys-cobra.dts
> @@ -62,11 +62,11 @@ wps_amber@9 {
> };
>
> &gpio_leds {
> - power {
> + led-power {
> label = "cobra:white:power";
> };
>
> - sata {
> + led-sata {
> label = "cobra:white:sata";
> };
> };
> diff --git a/arch/arm/boot/dts/armada-385-linksys-rango.dts b/arch/arm/boot/dts/armada-385-linksys-rango.dts
> index 3c4af57ec2b9..4ab45f294de2 100644
> --- a/arch/arm/boot/dts/armada-385-linksys-rango.dts
> +++ b/arch/arm/boot/dts/armada-385-linksys-rango.dts
> @@ -54,22 +54,22 @@ wps_amber@9 {
> };
>
> &gpio_leds {
> - power {
> + led-power {
> gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
> label = "rango:white:power";
> };
>
> - sata {
> + led-sata {
> gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
> label = "rango:white:sata";
> };
>
> - wlan_2g {
> + led-wlan_2g {
> gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
> label = "rango:white:wlan_2g";
> };
>
> - wlan_5g {
> + led-wlan_5g {
> gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
> label = "rango:white:wlan_5g";
> };
> diff --git a/arch/arm/boot/dts/armada-385-linksys-shelby.dts b/arch/arm/boot/dts/armada-385-linksys-shelby.dts
> index 3451cd3e5dff..f1b1f22413f1 100644
> --- a/arch/arm/boot/dts/armada-385-linksys-shelby.dts
> +++ b/arch/arm/boot/dts/armada-385-linksys-shelby.dts
> @@ -62,11 +62,11 @@ wps_amber@9 {
> };
>
> &gpio_leds {
> - power {
> + led-power {
> label = "shelby:white:power";
> };
>
> - sata {
> + led-sata {
> label = "shelby:white:sata";
> };
> };
> diff --git a/arch/arm/boot/dts/armada-385-linksys.dtsi b/arch/arm/boot/dts/armada-385-linksys.dtsi
> index 116aca5e688f..85e8d966f6c1 100644
> --- a/arch/arm/boot/dts/armada-385-linksys.dtsi
> +++ b/arch/arm/boot/dts/armada-385-linksys.dtsi
> @@ -71,12 +71,12 @@ gpio_leds: gpio-leds {
> pinctrl-0 = <&gpio_leds_pins>;
> pinctrl-names = "default";
>
> - power {
> + led-power {
> gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
> default-state = "on";
> };
>
> - sata {
> + led-sata {
> gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;
> default-state = "off";
> linux,default-trigger = "disk-activity";
> diff --git a/arch/arm/boot/dts/armada-385-synology-ds116.dts b/arch/arm/boot/dts/armada-385-synology-ds116.dts
> index 2622af73c9da..ea91ff964d94 100644
> --- a/arch/arm/boot/dts/armada-385-synology-ds116.dts
> +++ b/arch/arm/boot/dts/armada-385-synology-ds116.dts
> @@ -149,7 +149,7 @@ gpio-leds {
> * sata0, and accesses to SATA disk 0 make it blink so it
> * doesn't need to be declared here.
> */
> - orange {
> + led-orange {
> gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
> label = "ds116:orange:disk";
> default-state = "off";
> diff --git a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
> index 622ac40dd164..dbe8dfe236fb 100644
> --- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
> +++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
> @@ -195,7 +195,7 @@ gpio-leds {
> pinctrl-0 = <&power_led_pin>;
> pinctrl-names = "default";
>
> - power {
> + led-power {
> label = "mamba:white:power";
> gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
> default-state = "on";
> --
> 2.34.1
>
--
Gregory Clement, Bootlin
Embedded Linux and Kernel engineering
http://bootlin.com
next prev parent reply other threads:[~2022-11-28 0:17 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-11-25 14:41 [PATCH] ARM: dts: armada: align LED node names with dtschema Krzysztof Kozlowski
2022-11-25 14:41 ` Krzysztof Kozlowski
2022-11-28 0:16 ` Gregory CLEMENT [this message]
2022-11-28 0:16 ` Gregory CLEMENT
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87ilj07x2y.fsf@BL-laptop \
--to=gregory.clement@bootlin.com \
--cc=andrew@lunn.ch \
--cc=devicetree@vger.kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=krzysztof.kozlowski@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=sebastian.hesselbarth@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.