* [PATCH 01/17] tests/docker: remove dead code for linux-user containers
2022-04-01 14:13 [PATCH 00/17] tests/docker and tests/tcg cleanup and diet Paolo Bonzini
@ 2022-04-01 14:13 ` Paolo Bonzini
2022-04-01 14:13 ` [PATCH 02/17] tests/docker: remove test targets Paolo Bonzini
` (16 subsequent siblings)
17 siblings, 0 replies; 19+ messages in thread
From: Paolo Bonzini @ 2022-04-01 14:13 UTC (permalink / raw)
To: qemu-devel; +Cc: richard.henderson, alex.bennee
debian-powerpc-user-cross was the only linux-user powered cross builder
and it was removed in commit 80394ccf21 ("tests/docker: remove
debian-powerpc-user-cross", 2019-09-26). Remove all the infrastructure
around it since it is now unused.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220328140240.40798-2-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
tests/docker/Makefile.include | 11 -----------
1 file changed, 11 deletions(-)
diff --git a/tests/docker/Makefile.include b/tests/docker/Makefile.include
index e495b163a0..a6a5a20949 100644
--- a/tests/docker/Makefile.include
+++ b/tests/docker/Makefile.include
@@ -229,12 +229,6 @@ DOCKER_PARTIAL_IMAGES += debian-tricore-cross
DOCKER_PARTIAL_IMAGES += debian-xtensa-cross
DOCKER_PARTIAL_IMAGES += fedora-cris-cross
-# Rules for building linux-user powered images
-#
-# These are slower than using native cross compiler setups but can
-# work around issues with poorly working multi-arch systems and broken
-# packages.
-
# Expand all the pre-requistes for each docker image and test combination
$(foreach i,$(filter-out $(DOCKER_PARTIAL_IMAGES) $(DOCKER_VIRTUAL_IMAGES),$(DOCKER_IMAGES)), \
$(foreach t,$(DOCKER_TESTS), \
@@ -266,11 +260,6 @@ docker:
@echo
@echo 'Available container images:'
@echo ' $(DOCKER_IMAGES)'
-ifneq ($(DOCKER_USER_IMAGES),)
- @echo
- @echo 'Available linux-user images (docker-binfmt-image-debian-%):'
- @echo ' $(DOCKER_USER_IMAGES)'
-endif
@echo
@echo 'Available tests:'
@echo ' $(DOCKER_TESTS)'
--
2.35.1
^ permalink raw reply related [flat|nested] 19+ messages in thread* [PATCH 02/17] tests/docker: remove test targets
2022-04-01 14:13 [PATCH 00/17] tests/docker and tests/tcg cleanup and diet Paolo Bonzini
2022-04-01 14:13 ` [PATCH 01/17] tests/docker: remove dead code for linux-user containers Paolo Bonzini
@ 2022-04-01 14:13 ` Paolo Bonzini
2022-04-01 14:13 ` [PATCH 03/17] tests/docker: remove dead variable Paolo Bonzini
` (15 subsequent siblings)
17 siblings, 0 replies; 19+ messages in thread
From: Paolo Bonzini @ 2022-04-01 14:13 UTC (permalink / raw)
To: qemu-devel; +Cc: richard.henderson, alex.bennee
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220328140240.40798-3-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
tests/docker/Makefile.include | 20 +-------------------
tests/docker/dockerfiles/empty.docker | 8 --------
2 files changed, 1 insertion(+), 27 deletions(-)
delete mode 100644 tests/docker/dockerfiles/empty.docker
diff --git a/tests/docker/Makefile.include b/tests/docker/Makefile.include
index a6a5a20949..06c40a9320 100644
--- a/tests/docker/Makefile.include
+++ b/tests/docker/Makefile.include
@@ -18,7 +18,7 @@ DOCKER_FILES_DIR := $(SRC_PATH)/tests/docker/dockerfiles
# we don't run tests on intermediate images (used as base by another image)
DOCKER_PARTIAL_IMAGES := debian10 debian11
# we don't directly build virtual images (they are used to build other images)
-DOCKER_VIRTUAL_IMAGES := debian-bootstrap debian-toolchain empty
+DOCKER_VIRTUAL_IMAGES := debian-bootstrap debian-toolchain
__IMAGES := $(sort $(filter-out $(DOCKER_VIRTUAL_IMAGES), $(notdir $(basename $(wildcard $(DOCKER_FILES_DIR)/*.docker)))))
DOCKER_IMAGES := $(if $(IMAGES), $(filter $(IMAGES), $(__IMAGES)), $(__IMAGES))
DOCKER_TARGETS := $(patsubst %,docker-image-%,$(DOCKER_IMAGES))
@@ -99,24 +99,6 @@ docker-binfmt-image-debian-%: $(DOCKER_FILES_DIR)/debian-bootstrap.docker
{ echo "You will need to build $(EXECUTABLE)"; exit 1;},\
"CHECK", "debian-$* exists"))
-# These are test targets
-USER_TCG_TARGETS=$(patsubst %-linux-user,qemu-%,$(filter %-linux-user,$(TARGET_DIRS)))
-EXEC_COPY_TESTS=$(patsubst %,docker-exec-copy-test-%, $(USER_TCG_TARGETS))
-
-$(EXEC_COPY_TESTS): docker-exec-copy-test-%: $(DOCKER_FILES_DIR)/empty.docker
- $(call quiet-command, \
- $(DOCKER_SCRIPT) build -t qemu/exec-copy-test-$* -f $< \
- $(if $V,,--quiet) --no-cache \
- --include-executable=$* \
- --skip-binfmt, \
- "TEST","copy $* to container")
- $(call quiet-command, \
- $(DOCKER_SCRIPT) run qemu/exec-copy-test-$* \
- /$* -version > tests/docker-exec-copy-test-$*.out, \
- "TEST","check $* works in container")
-
-docker-exec-copy-test: $(EXEC_COPY_TESTS)
-
endif
# Enforce dependencies for composite images
diff --git a/tests/docker/dockerfiles/empty.docker b/tests/docker/dockerfiles/empty.docker
deleted file mode 100644
index 9ba980f1a8..0000000000
--- a/tests/docker/dockerfiles/empty.docker
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# Empty Dockerfile
-#
-
-FROM scratch
-
-# Add everything from the context into the container
-ADD . /
--
2.35.1
^ permalink raw reply related [flat|nested] 19+ messages in thread* [PATCH 03/17] tests/docker: remove dead variable
2022-04-01 14:13 [PATCH 00/17] tests/docker and tests/tcg cleanup and diet Paolo Bonzini
2022-04-01 14:13 ` [PATCH 01/17] tests/docker: remove dead code for linux-user containers Paolo Bonzini
2022-04-01 14:13 ` [PATCH 02/17] tests/docker: remove test targets Paolo Bonzini
@ 2022-04-01 14:13 ` Paolo Bonzini
2022-04-01 14:13 ` [PATCH 04/17] tests/docker: remove unnecessary default definitions Paolo Bonzini
` (14 subsequent siblings)
17 siblings, 0 replies; 19+ messages in thread
From: Paolo Bonzini @ 2022-04-01 14:13 UTC (permalink / raw)
To: qemu-devel; +Cc: richard.henderson, alex.bennee
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220328140240.40798-4-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
tests/docker/Makefile.include | 1 -
1 file changed, 1 deletion(-)
diff --git a/tests/docker/Makefile.include b/tests/docker/Makefile.include
index 06c40a9320..c8d0ec3c66 100644
--- a/tests/docker/Makefile.include
+++ b/tests/docker/Makefile.include
@@ -13,7 +13,6 @@ HOST_ARCH = $(if $(ARCH),$(ARCH),$(shell uname -m))
TESTS ?= %
IMAGES ?= %
-DOCKER_SUFFIX := .docker
DOCKER_FILES_DIR := $(SRC_PATH)/tests/docker/dockerfiles
# we don't run tests on intermediate images (used as base by another image)
DOCKER_PARTIAL_IMAGES := debian10 debian11
--
2.35.1
^ permalink raw reply related [flat|nested] 19+ messages in thread* [PATCH 04/17] tests/docker: remove unnecessary default definitions
2022-04-01 14:13 [PATCH 00/17] tests/docker and tests/tcg cleanup and diet Paolo Bonzini
` (2 preceding siblings ...)
2022-04-01 14:13 ` [PATCH 03/17] tests/docker: remove dead variable Paolo Bonzini
@ 2022-04-01 14:13 ` Paolo Bonzini
2022-04-01 14:13 ` [PATCH 05/17] tests/docker: inline variable definitions or move close to use Paolo Bonzini
` (13 subsequent siblings)
17 siblings, 0 replies; 19+ messages in thread
From: Paolo Bonzini @ 2022-04-01 14:13 UTC (permalink / raw)
To: qemu-devel; +Cc: richard.henderson, alex.bennee
The definition of DOCKER_IMAGES and DOCKER_TESTS copes already with an
empty value of $(IMAGES) and $(TESTS), no need to force them to "%" if
undefined.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220328140240.40798-5-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
tests/docker/Makefile.include | 5 -----
1 file changed, 5 deletions(-)
diff --git a/tests/docker/Makefile.include b/tests/docker/Makefile.include
index c8d0ec3c66..751151d7e9 100644
--- a/tests/docker/Makefile.include
+++ b/tests/docker/Makefile.include
@@ -8,11 +8,6 @@ COMMA := ,
HOST_ARCH = $(if $(ARCH),$(ARCH),$(shell uname -m))
-# These variables can be set by the user to limit the set of docker
-# images and tests to a more restricted subset
-TESTS ?= %
-IMAGES ?= %
-
DOCKER_FILES_DIR := $(SRC_PATH)/tests/docker/dockerfiles
# we don't run tests on intermediate images (used as base by another image)
DOCKER_PARTIAL_IMAGES := debian10 debian11
--
2.35.1
^ permalink raw reply related [flat|nested] 19+ messages in thread* [PATCH 05/17] tests/docker: inline variable definitions or move close to use
2022-04-01 14:13 [PATCH 00/17] tests/docker and tests/tcg cleanup and diet Paolo Bonzini
` (3 preceding siblings ...)
2022-04-01 14:13 ` [PATCH 04/17] tests/docker: remove unnecessary default definitions Paolo Bonzini
@ 2022-04-01 14:13 ` Paolo Bonzini
2022-04-01 14:13 ` [PATCH 06/17] tests/docker: remove unnecessary filtering of $(DOCKER_IMAGES) Paolo Bonzini
` (12 subsequent siblings)
17 siblings, 0 replies; 19+ messages in thread
From: Paolo Bonzini @ 2022-04-01 14:13 UTC (permalink / raw)
To: qemu-devel; +Cc: richard.henderson, alex.bennee
Variables that are defined with ":=" are handled imperatively, so moving
them closer to the first use ensures that all the assignments prior to
the first use are taken into account.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220328140240.40798-6-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
tests/docker/Makefile.include | 32 ++++++++++++++++----------------
1 file changed, 16 insertions(+), 16 deletions(-)
diff --git a/tests/docker/Makefile.include b/tests/docker/Makefile.include
index 751151d7e9..9b4d1cf837 100644
--- a/tests/docker/Makefile.include
+++ b/tests/docker/Makefile.include
@@ -9,26 +9,12 @@ COMMA := ,
HOST_ARCH = $(if $(ARCH),$(ARCH),$(shell uname -m))
DOCKER_FILES_DIR := $(SRC_PATH)/tests/docker/dockerfiles
-# we don't run tests on intermediate images (used as base by another image)
-DOCKER_PARTIAL_IMAGES := debian10 debian11
-# we don't directly build virtual images (they are used to build other images)
-DOCKER_VIRTUAL_IMAGES := debian-bootstrap debian-toolchain
-__IMAGES := $(sort $(filter-out $(DOCKER_VIRTUAL_IMAGES), $(notdir $(basename $(wildcard $(DOCKER_FILES_DIR)/*.docker)))))
-DOCKER_IMAGES := $(if $(IMAGES), $(filter $(IMAGES), $(__IMAGES)), $(__IMAGES))
-DOCKER_TARGETS := $(patsubst %,docker-image-%,$(DOCKER_IMAGES))
-# Use a global constant ccache directory to speed up repetitive builds
-DOCKER_CCACHE_DIR := $$HOME/.cache/qemu-docker-ccache
ifeq ($(HOST_ARCH),x86_64)
DOCKER_DEFAULT_REGISTRY := registry.gitlab.com/qemu-project/qemu
endif
DOCKER_REGISTRY := $(if $(REGISTRY),$(REGISTRY),$(DOCKER_DEFAULT_REGISTRY))
-__TESTS := $(notdir $(shell \
- find $(SRC_PATH)/tests/docker/ -name 'test-*' -type f))
-DOCKER_TESTS := $(if $(TESTS), $(filter $(TESTS), $(__TESTS)), $(__TESTS))
-
ENGINE := auto
-
DOCKER_SCRIPT=$(SRC_PATH)/tests/docker/docker.py --engine $(ENGINE)
CUR_TIME := $(shell date +%Y-%m-%d-%H.%M.%S.$$$$)
@@ -47,8 +33,6 @@ $(DOCKER_SRC_COPY):
docker-qemu-src: $(DOCKER_SRC_COPY)
-docker-image: ${DOCKER_TARGETS}
-
# General rule for building docker images. If we are a sub-make
# invoked with SKIP_DOCKER_BUILD we still check the image is up to date
# though
@@ -96,6 +80,8 @@ docker-binfmt-image-debian-%: $(DOCKER_FILES_DIR)/debian-bootstrap.docker
endif
# Enforce dependencies for composite images
+# we don't run tests on intermediate images (used as base by another image)
+DOCKER_PARTIAL_IMAGES := debian10 debian11
ifeq ($(HOST_ARCH),x86_64)
docker-image-debian-amd64: docker-image-debian10
DOCKER_PARTIAL_IMAGES += debian-amd64-cross
@@ -205,6 +191,15 @@ DOCKER_PARTIAL_IMAGES += debian-tricore-cross
DOCKER_PARTIAL_IMAGES += debian-xtensa-cross
DOCKER_PARTIAL_IMAGES += fedora-cris-cross
+# images that are only used to build other images
+DOCKER_VIRTUAL_IMAGES := debian-bootstrap debian-toolchain
+
+__IMAGES := $(sort $(filter-out $(DOCKER_VIRTUAL_IMAGES), $(notdir $(basename $(wildcard $(DOCKER_FILES_DIR)/*.docker)))))
+DOCKER_IMAGES := $(if $(IMAGES), $(filter $(IMAGES), $(__IMAGES)), $(__IMAGES))
+
+__TESTS := $(notdir $(shell find $(SRC_PATH)/tests/docker/ -name 'test-*' -type f))
+DOCKER_TESTS := $(if $(TESTS), $(filter $(TESTS), $(__TESTS)), $(__TESTS))
+
# Expand all the pre-requistes for each docker image and test combination
$(foreach i,$(filter-out $(DOCKER_PARTIAL_IMAGES) $(DOCKER_VIRTUAL_IMAGES),$(DOCKER_IMAGES)), \
$(foreach t,$(DOCKER_TESTS), \
@@ -263,6 +258,9 @@ docker:
docker-help: docker
+# Use a global constant ccache directory to speed up repetitive builds
+DOCKER_CCACHE_DIR := $$HOME/.cache/qemu-docker-ccache
+
# This rule if for directly running against an arbitrary docker target.
# It is called by the expanded docker targets (e.g. make
# docker-test-foo@bar) which will do additional verification.
@@ -308,5 +306,7 @@ docker-run-%: IMAGE = $(shell echo '$@' | sed -e 's/docker-run-\([^@]*\)@\(.*\)/
docker-run-%:
@$(MAKE) docker-run TEST=$(CMD) IMAGE=qemu/$(IMAGE)
+docker-image: ${DOCKER_IMAGES:%=docker-image-%}
+
docker-clean:
$(call quiet-command, $(DOCKER_SCRIPT) clean)
--
2.35.1
^ permalink raw reply related [flat|nested] 19+ messages in thread* [PATCH 06/17] tests/docker: remove unnecessary filtering of $(DOCKER_IMAGES)
2022-04-01 14:13 [PATCH 00/17] tests/docker and tests/tcg cleanup and diet Paolo Bonzini
` (4 preceding siblings ...)
2022-04-01 14:13 ` [PATCH 05/17] tests/docker: inline variable definitions or move close to use Paolo Bonzini
@ 2022-04-01 14:13 ` Paolo Bonzini
2022-04-01 14:13 ` [PATCH 07/17] tests/docker: simplify docker-TEST@IMAGE targets Paolo Bonzini
` (11 subsequent siblings)
17 siblings, 0 replies; 19+ messages in thread
From: Paolo Bonzini @ 2022-04-01 14:13 UTC (permalink / raw)
To: qemu-devel; +Cc: richard.henderson, alex.bennee
Now that DOCKER_IMAGES is only defined after DOCKER_VIRTUAL_IMAGES is
complete, there is no need to re-filter DOCKER_IMAGES against it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220328140240.40798-7-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
tests/docker/Makefile.include | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/tests/docker/Makefile.include b/tests/docker/Makefile.include
index 9b4d1cf837..3b5ebd5567 100644
--- a/tests/docker/Makefile.include
+++ b/tests/docker/Makefile.include
@@ -201,7 +201,7 @@ __TESTS := $(notdir $(shell find $(SRC_PATH)/tests/docker/ -name 'test-*' -type
DOCKER_TESTS := $(if $(TESTS), $(filter $(TESTS), $(__TESTS)), $(__TESTS))
# Expand all the pre-requistes for each docker image and test combination
-$(foreach i,$(filter-out $(DOCKER_PARTIAL_IMAGES) $(DOCKER_VIRTUAL_IMAGES),$(DOCKER_IMAGES)), \
+$(foreach i,$(filter-out $(DOCKER_PARTIAL_IMAGES),$(DOCKER_IMAGES)), \
$(foreach t,$(DOCKER_TESTS), \
$(eval .PHONY: docker-$t@$i) \
$(eval docker-$t@$i: docker-image-$i docker-run-$t@$i) \
--
2.35.1
^ permalink raw reply related [flat|nested] 19+ messages in thread* [PATCH 07/17] tests/docker: simplify docker-TEST@IMAGE targets
2022-04-01 14:13 [PATCH 00/17] tests/docker and tests/tcg cleanup and diet Paolo Bonzini
` (5 preceding siblings ...)
2022-04-01 14:13 ` [PATCH 06/17] tests/docker: remove unnecessary filtering of $(DOCKER_IMAGES) Paolo Bonzini
@ 2022-04-01 14:13 ` Paolo Bonzini
2022-04-01 14:13 ` [PATCH 08/17] tests/docker: do not duplicate rules for hexagon-cross Paolo Bonzini
` (10 subsequent siblings)
17 siblings, 0 replies; 19+ messages in thread
From: Paolo Bonzini @ 2022-04-01 14:13 UTC (permalink / raw)
To: qemu-devel; +Cc: richard.henderson, alex.bennee
No need to go through the shell when we already have the test and images at
the point where the targets are declared.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220328140240.40798-8-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
tests/docker/Makefile.include | 12 ++----------
1 file changed, 2 insertions(+), 10 deletions(-)
diff --git a/tests/docker/Makefile.include b/tests/docker/Makefile.include
index 3b5ebd5567..2a187cb5a2 100644
--- a/tests/docker/Makefile.include
+++ b/tests/docker/Makefile.include
@@ -204,7 +204,7 @@ DOCKER_TESTS := $(if $(TESTS), $(filter $(TESTS), $(__TESTS)), $(__TESTS))
$(foreach i,$(filter-out $(DOCKER_PARTIAL_IMAGES),$(DOCKER_IMAGES)), \
$(foreach t,$(DOCKER_TESTS), \
$(eval .PHONY: docker-$t@$i) \
- $(eval docker-$t@$i: docker-image-$i docker-run-$t@$i) \
+ $(eval docker-$t@$i: docker-image-$i; @$(MAKE) docker-run TEST=$t IMAGE=$i) \
) \
$(foreach t,$(DOCKER_TESTS), \
$(eval docker-all-tests: docker-$t@$i) \
@@ -263,7 +263,7 @@ DOCKER_CCACHE_DIR := $$HOME/.cache/qemu-docker-ccache
# This rule if for directly running against an arbitrary docker target.
# It is called by the expanded docker targets (e.g. make
-# docker-test-foo@bar) which will do additional verification.
+# docker-test-foo@bar) which will also ensure the image is up to date.
#
# For example: make docker-run TEST="test-quick" IMAGE="debian:arm64" EXECUTABLE=./aarch64-linux-user/qemu-aarch64
#
@@ -298,14 +298,6 @@ docker-run: docker-qemu-src
$(call quiet-command, rm -r $(DOCKER_SRC_COPY), \
" CLEANUP $(DOCKER_SRC_COPY)")
-# Run targets:
-#
-# Of the form docker-TEST-FOO@IMAGE-BAR which will then be expanded into a call to "make docker-run"
-docker-run-%: CMD = $(shell echo '$@' | sed -e 's/docker-run-\([^@]*\)@\(.*\)/\1/')
-docker-run-%: IMAGE = $(shell echo '$@' | sed -e 's/docker-run-\([^@]*\)@\(.*\)/\2/')
-docker-run-%:
- @$(MAKE) docker-run TEST=$(CMD) IMAGE=qemu/$(IMAGE)
-
docker-image: ${DOCKER_IMAGES:%=docker-image-%}
docker-clean:
--
2.35.1
^ permalink raw reply related [flat|nested] 19+ messages in thread* [PATCH 08/17] tests/docker: do not duplicate rules for hexagon-cross
2022-04-01 14:13 [PATCH 00/17] tests/docker and tests/tcg cleanup and diet Paolo Bonzini
` (6 preceding siblings ...)
2022-04-01 14:13 ` [PATCH 07/17] tests/docker: simplify docker-TEST@IMAGE targets Paolo Bonzini
@ 2022-04-01 14:13 ` Paolo Bonzini
2022-04-01 14:13 ` [PATCH 09/17] tests/tcg: add compiler test variables when using containers Paolo Bonzini
` (9 subsequent siblings)
17 siblings, 0 replies; 19+ messages in thread
From: Paolo Bonzini @ 2022-04-01 14:13 UTC (permalink / raw)
To: qemu-devel; +Cc: richard.henderson, alex.bennee
The commands for docker-image-debian-hexagon-cross are the same as those
in debian-toolchain-run, just with a nonstandard path to build-toolchain.sh.
Reuse the definition by renaming the debian-hexagon-cross.docker.d directory.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
tests/docker/Makefile.include | 26 +++----------------
.../build-toolchain.sh | 0
2 files changed, 4 insertions(+), 22 deletions(-)
rename tests/docker/dockerfiles/{debian-hexagon-cross.docker.d => debian-hexagon-cross.d}/build-toolchain.sh (100%)
diff --git a/tests/docker/Makefile.include b/tests/docker/Makefile.include
index 2a187cb5a2..eb100c294f 100644
--- a/tests/docker/Makefile.include
+++ b/tests/docker/Makefile.include
@@ -121,28 +121,6 @@ docker-image-debian11: NOUSER=1
# alpine has no adduser
docker-image-alpine: NOUSER=1
-#
-# The build rule for hexagon-cross is special in so far for most of
-# the time we don't want to build it. While dockers caching does avoid
-# this most of the time sometimes we want to force the issue.
-#
-docker-image-debian-hexagon-cross: $(DOCKER_FILES_DIR)/debian-hexagon-cross.docker
- $(if $(NOCACHE), \
- $(call quiet-command, \
- $(DOCKER_SCRIPT) build -t qemu/debian-hexagon-cross -f $< \
- $(if $V,,--quiet) --no-cache \
- --registry $(DOCKER_REGISTRY) --extra-files \
- $(DOCKER_FILES_DIR)/debian-hexagon-cross.docker.d/build-toolchain.sh, \
- "BUILD", "debian-hexagon-cross"), \
- $(call quiet-command, \
- $(DOCKER_SCRIPT) fetch $(if $V,,--quiet) \
- qemu/debian-hexagon-cross $(DOCKER_REGISTRY), \
- "FETCH", "debian-hexagon-cross") \
- $(call quiet-command, \
- $(DOCKER_SCRIPT) update $(if $V,,--quiet) \
- qemu/debian-hexagon-cross --add-current-user, \
- "PREPARE", "debian-hexagon-cross"))
-
debian-toolchain-run = \
$(if $(NOCACHE), \
$(call quiet-command, \
@@ -162,6 +140,10 @@ debian-toolchain-run = \
"PREPARE", $1))
debian-toolchain = $(call debian-toolchain-run,$(patsubst docker-image-%,%,$1))
+docker-image-debian-hexagon-cross: $(DOCKER_FILES_DIR)/debian-hexagon-cross.docker \
+ $(DOCKER_FILES_DIR)/debian-hexagon-cross.d/build-toolchain.sh
+ $(call debian-toolchain, $@)
+
docker-image-debian-microblaze-cross: $(DOCKER_FILES_DIR)/debian-toolchain.docker \
$(DOCKER_FILES_DIR)/debian-microblaze-cross.d/build-toolchain.sh
$(call debian-toolchain, $@)
diff --git a/tests/docker/dockerfiles/debian-hexagon-cross.docker.d/build-toolchain.sh b/tests/docker/dockerfiles/debian-hexagon-cross.d/build-toolchain.sh
similarity index 100%
rename from tests/docker/dockerfiles/debian-hexagon-cross.docker.d/build-toolchain.sh
rename to tests/docker/dockerfiles/debian-hexagon-cross.d/build-toolchain.sh
--
2.35.1
^ permalink raw reply related [flat|nested] 19+ messages in thread* [PATCH 09/17] tests/tcg: add compiler test variables when using containers
2022-04-01 14:13 [PATCH 00/17] tests/docker and tests/tcg cleanup and diet Paolo Bonzini
` (7 preceding siblings ...)
2022-04-01 14:13 ` [PATCH 08/17] tests/docker: do not duplicate rules for hexagon-cross Paolo Bonzini
@ 2022-04-01 14:13 ` Paolo Bonzini
2022-04-01 14:13 ` [PATCH 10/17] tests/tcg: remove CONFIG_LINUX_USER from config-target.mak Paolo Bonzini
` (8 subsequent siblings)
17 siblings, 0 replies; 19+ messages in thread
From: Paolo Bonzini @ 2022-04-01 14:13 UTC (permalink / raw)
To: qemu-devel; +Cc: richard.henderson, alex.bennee
Even for container-based cross compilation use $(CROSS_CC_HAS_*) variables.
This makes the TCG test makefiles oblivious of whether the compiler is
invoked through a container or not.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220328140240.40798-9-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
tests/tcg/aarch64/Makefile.softmmu-target | 2 +-
tests/tcg/aarch64/Makefile.target | 10 +++++-----
tests/tcg/configure.sh | 17 +++++++++++++++++
tests/tcg/i386/Makefile.target | 2 +-
tests/tcg/ppc64/Makefile.target | 4 ++--
tests/tcg/ppc64le/Makefile.target | 4 ++--
6 files changed, 28 insertions(+), 11 deletions(-)
diff --git a/tests/tcg/aarch64/Makefile.softmmu-target b/tests/tcg/aarch64/Makefile.softmmu-target
index a7286ac295..f6fcd4829e 100644
--- a/tests/tcg/aarch64/Makefile.softmmu-target
+++ b/tests/tcg/aarch64/Makefile.softmmu-target
@@ -64,7 +64,7 @@ run-memory-replay: memory-replay run-memory-record
EXTRA_RUNS+=run-memory-replay
-ifneq ($(DOCKER_IMAGE)$(CROSS_CC_HAS_ARMV8_3),)
+ifneq ($(CROSS_CC_HAS_ARMV8_3),)
pauth-3: CFLAGS += -march=armv8.3-a
else
pauth-3:
diff --git a/tests/tcg/aarch64/Makefile.target b/tests/tcg/aarch64/Makefile.target
index f7121cb4d8..6ad0ad49f9 100644
--- a/tests/tcg/aarch64/Makefile.target
+++ b/tests/tcg/aarch64/Makefile.target
@@ -18,7 +18,7 @@ run-fcvt: fcvt
$(call diff-out,$<,$(AARCH64_SRC)/fcvt.ref)
# Pauth Tests
-ifneq ($(DOCKER_IMAGE)$(CROSS_CC_HAS_ARMV8_3),)
+ifneq ($(CROSS_CC_HAS_ARMV8_3),)
AARCH64_TESTS += pauth-1 pauth-2 pauth-4 pauth-5
pauth-%: CFLAGS += -march=armv8.3-a
run-pauth-%: QEMU_OPTS += -cpu max
@@ -27,7 +27,7 @@ endif
# BTI Tests
# bti-1 tests the elf notes, so we require special compiler support.
-ifneq ($(DOCKER_IMAGE)$(CROSS_CC_HAS_ARMV8_BTI),)
+ifneq ($(CROSS_CC_HAS_ARMV8_BTI),)
AARCH64_TESTS += bti-1
bti-1: CFLAGS += -mbranch-protection=standard
bti-1: LDFLAGS += -nostdlib
@@ -36,12 +36,12 @@ endif
AARCH64_TESTS += bti-2
# MTE Tests
-ifneq ($(DOCKER_IMAGE)$(CROSS_CC_HAS_ARMV8_MTE),)
+ifneq ($(CROSS_CC_HAS_ARMV8_MTE),)
AARCH64_TESTS += mte-1 mte-2 mte-3 mte-4 mte-5 mte-6 mte-7
mte-%: CFLAGS += -march=armv8.5-a+memtag
endif
-ifneq ($(DOCKER_IMAGE)$(CROSS_CC_HAS_SVE),)
+ifneq ($(CROSS_CC_HAS_SVE),)
# System Registers Tests
AARCH64_TESTS += sysregs
sysregs: CFLAGS+=-march=armv8.1-a+sve
@@ -88,7 +88,7 @@ EXTRA_RUNS += run-gdbstub-sysregs run-gdbstub-sve-ioctls
endif
endif
-ifneq ($(DOCKER_IMAGE)$(CROSS_CC_HAS_SVE2),)
+ifneq ($(CROSS_CC_HAS_SVE2),)
AARCH64_TESTS += test-826
test-826: CFLAGS+=-march=armv8.1-a+sve2
endif
diff --git a/tests/tcg/configure.sh b/tests/tcg/configure.sh
index 84f928f7f8..8927a2b260 100755
--- a/tests/tcg/configure.sh
+++ b/tests/tcg/configure.sh
@@ -348,6 +348,23 @@ for target in $target_list; do
echo "DOCKER_CROSS_LD_GUEST=$container_cross_ld" >> \
$config_target_mak
fi
+ case $target in
+ aarch64-*)
+ echo "CROSS_CC_HAS_SVE=y" >> $config_target_mak
+ echo "CROSS_CC_HAS_SVE2=y" >> $config_target_mak
+ echo "CROSS_CC_HAS_ARMV8_3=y" >> $config_target_mak
+ echo "CROSS_CC_HAS_ARMV8_BTI=y" >> $config_target_mak
+ echo "CROSS_CC_HAS_ARMV8_MTE=y" >> $config_target_mak
+ ;;
+ ppc*)
+ echo "CROSS_CC_HAS_POWER8_VECTOR=y" >> $config_target_mak
+ echo "CROSS_CC_HAS_POWER10=y" >> $config_target_mak
+ ;;
+ i386-linux-user)
+ echo "CROSS_CC_HAS_I386_NOPIE=y" >> $config_target_mak
+ ;;
+ esac
+ break
fi
done
fi
diff --git a/tests/tcg/i386/Makefile.target b/tests/tcg/i386/Makefile.target
index e1c0310be6..bd73c96d0d 100644
--- a/tests/tcg/i386/Makefile.target
+++ b/tests/tcg/i386/Makefile.target
@@ -30,7 +30,7 @@ hello-i386: LDFLAGS+=-nostdlib
# test-386 includes a couple of additional objects that need to be
# linked together, we also need a no-pie capable compiler due to the
# non-pic calls into 16-bit mode
-ifneq ($(DOCKER_IMAGE)$(CROSS_CC_HAS_I386_NOPIE),)
+ifneq ($(CROSS_CC_HAS_I386_NOPIE),)
test-i386: CFLAGS += -fno-pie
test-i386: test-i386.c test-i386-code16.S test-i386-vm86.S test-i386.h test-i386-shift.h test-i386-muldiv.h
diff --git a/tests/tcg/ppc64/Makefile.target b/tests/tcg/ppc64/Makefile.target
index 8197c288a7..babd209573 100644
--- a/tests/tcg/ppc64/Makefile.target
+++ b/tests/tcg/ppc64/Makefile.target
@@ -5,14 +5,14 @@
VPATH += $(SRC_PATH)/tests/tcg/ppc64
VPATH += $(SRC_PATH)/tests/tcg/ppc64le
-ifneq ($(DOCKER_IMAGE)$(CROSS_CC_HAS_POWER8_VECTOR),)
+ifneq ($(CROSS_CC_HAS_POWER8_VECTOR),)
PPC64_TESTS=bcdsub non_signalling_xscv
endif
$(PPC64_TESTS): CFLAGS += -mpower8-vector
PPC64_TESTS += mtfsf
-ifneq ($(DOCKER_IMAGE)$(CROSS_CC_HAS_POWER10),)
+ifneq ($(CROSS_CC_HAS_POWER10),)
PPC64_TESTS += byte_reverse sha512-vector
endif
byte_reverse: CFLAGS += -mcpu=power10
diff --git a/tests/tcg/ppc64le/Makefile.target b/tests/tcg/ppc64le/Makefile.target
index 9624bb1e9c..5b0eb5e870 100644
--- a/tests/tcg/ppc64le/Makefile.target
+++ b/tests/tcg/ppc64le/Makefile.target
@@ -4,12 +4,12 @@
VPATH += $(SRC_PATH)/tests/tcg/ppc64le
-ifneq ($(DOCKER_IMAGE)$(CROSS_CC_HAS_POWER8_VECTOR),)
+ifneq ($(CROSS_CC_HAS_POWER8_VECTOR),)
PPC64LE_TESTS=bcdsub non_signalling_xscv
endif
$(PPC64LE_TESTS): CFLAGS += -mpower8-vector
-ifneq ($(DOCKER_IMAGE)$(CROSS_CC_HAS_POWER10),)
+ifneq ($(CROSS_CC_HAS_POWER10),)
PPC64LE_TESTS += byte_reverse sha512-vector
endif
byte_reverse: CFLAGS += -mcpu=power10
--
2.35.1
^ permalink raw reply related [flat|nested] 19+ messages in thread* [PATCH 10/17] tests/tcg: remove CONFIG_LINUX_USER from config-target.mak
2022-04-01 14:13 [PATCH 00/17] tests/docker and tests/tcg cleanup and diet Paolo Bonzini
` (8 preceding siblings ...)
2022-04-01 14:13 ` [PATCH 09/17] tests/tcg: add compiler test variables when using containers Paolo Bonzini
@ 2022-04-01 14:13 ` Paolo Bonzini
2022-04-01 14:13 ` [PATCH 11/17] tests/tcg: remove CONFIG_USER_ONLY " Paolo Bonzini
` (7 subsequent siblings)
17 siblings, 0 replies; 19+ messages in thread
From: Paolo Bonzini @ 2022-04-01 14:13 UTC (permalink / raw)
To: qemu-devel; +Cc: richard.henderson, alex.bennee, Philippe Mathieu-Daudé
Just check the target name instead.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220328140240.40798-10-pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
tests/tcg/configure.sh | 2 --
tests/tcg/multiarch/Makefile.target | 2 +-
tests/tcg/x86_64/Makefile.target | 2 +-
3 files changed, 2 insertions(+), 4 deletions(-)
diff --git a/tests/tcg/configure.sh b/tests/tcg/configure.sh
index 8927a2b260..57026b5899 100755
--- a/tests/tcg/configure.sh
+++ b/tests/tcg/configure.sh
@@ -227,12 +227,10 @@ for target in $target_list; do
case $target in
*-linux-user)
echo "CONFIG_USER_ONLY=y" >> $config_target_mak
- echo "CONFIG_LINUX_USER=y" >> $config_target_mak
echo "QEMU=$PWD/qemu-$arch" >> $config_target_mak
;;
*-bsd-user)
echo "CONFIG_USER_ONLY=y" >> $config_target_mak
- echo "CONFIG_BSD_USER=y" >> $config_target_mak
echo "QEMU=$PWD/qemu-$arch" >> $config_target_mak
;;
*-softmmu)
diff --git a/tests/tcg/multiarch/Makefile.target b/tests/tcg/multiarch/Makefile.target
index dec401e67f..6bba523729 100644
--- a/tests/tcg/multiarch/Makefile.target
+++ b/tests/tcg/multiarch/Makefile.target
@@ -10,7 +10,7 @@ MULTIARCH_SRC=$(SRC_PATH)/tests/tcg/multiarch
# Set search path for all sources
VPATH += $(MULTIARCH_SRC)
MULTIARCH_SRCS = $(notdir $(wildcard $(MULTIARCH_SRC)/*.c))
-ifneq ($(CONFIG_LINUX_USER),)
+ifeq ($(filter %-linux-user, $(TARGET)),$(TARGET))
VPATH += $(MULTIARCH_SRC)/linux
MULTIARCH_SRCS += $(notdir $(wildcard $(MULTIARCH_SRC)/linux/*.c))
endif
diff --git a/tests/tcg/x86_64/Makefile.target b/tests/tcg/x86_64/Makefile.target
index 17cf168f0a..f9fcd31caf 100644
--- a/tests/tcg/x86_64/Makefile.target
+++ b/tests/tcg/x86_64/Makefile.target
@@ -8,7 +8,7 @@
include $(SRC_PATH)/tests/tcg/i386/Makefile.target
-ifneq ($(CONFIG_LINUX_USER),)
+ifeq ($(filter %-linux-user, $(TARGET)),$(TARGET))
X86_64_TESTS += vsyscall
TESTS=$(MULTIARCH_TESTS) $(X86_64_TESTS) test-x86_64
else
--
2.35.1
^ permalink raw reply related [flat|nested] 19+ messages in thread* [PATCH 11/17] tests/tcg: remove CONFIG_USER_ONLY from config-target.mak
2022-04-01 14:13 [PATCH 00/17] tests/docker and tests/tcg cleanup and diet Paolo Bonzini
` (9 preceding siblings ...)
2022-04-01 14:13 ` [PATCH 10/17] tests/tcg: remove CONFIG_LINUX_USER from config-target.mak Paolo Bonzini
@ 2022-04-01 14:13 ` Paolo Bonzini
2022-04-01 14:13 ` [PATCH 12/17] tests/tcg: prepare Makefile.prereqs at configure time Paolo Bonzini
` (6 subsequent siblings)
17 siblings, 0 replies; 19+ messages in thread
From: Paolo Bonzini @ 2022-04-01 14:13 UTC (permalink / raw)
To: qemu-devel; +Cc: richard.henderson, alex.bennee
Just check the target name instead.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220328140240.40798-11-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
tests/tcg/Makefile.target | 8 ++++----
tests/tcg/configure.sh | 12 +++---------
2 files changed, 7 insertions(+), 13 deletions(-)
diff --git a/tests/tcg/Makefile.target b/tests/tcg/Makefile.target
index acda5bcec2..c75e8d983f 100644
--- a/tests/tcg/Makefile.target
+++ b/tests/tcg/Makefile.target
@@ -34,7 +34,7 @@ all:
-include ../config-$(TARGET).mak
# Get semihosting definitions for user-mode emulation
-ifeq ($(CONFIG_USER_ONLY),y)
+ifeq ($(filter %-softmmu, $(TARGET)),)
-include $(SRC_PATH)/configs/targets/$(TARGET).mak
endif
@@ -44,7 +44,7 @@ COMMA := ,
quiet-command = $(if $(V),$1,$(if $(2),@printf " %-7s %s\n" $2 $3 && $1, @$1))
# $1 = test name, $2 = cmd, $3 = desc
-ifdef CONFIG_USER_ONLY
+ifeq ($(filter %-softmmu, $(TARGET)),)
run-test = $(call quiet-command, timeout --foreground $(TIMEOUT) $2 > $1.out, \
"TEST",$3)
else
@@ -91,7 +91,7 @@ QEMU_OPTS=
# 90s with --enable-tcg-interpreter
TIMEOUT=90
-ifdef CONFIG_USER_ONLY
+ifeq ($(filter %-softmmu, $(TARGET)),)
# The order we include is important. We include multiarch first and
# then the target. If there are common tests shared between
# sub-targets (e.g. ARM & AArch64) then it is up to
@@ -153,7 +153,7 @@ extract-plugin = $(wordlist 2, 2, $(subst -with-, ,$1))
RUN_TESTS+=$(EXTRA_RUNS)
-ifdef CONFIG_USER_ONLY
+ifeq ($(filter %-softmmu, $(TARGET)),)
run-%: %
$(call run-test, $<, $(QEMU) $(QEMU_OPTS) $<, "$< on $(TARGET_NAME)")
diff --git a/tests/tcg/configure.sh b/tests/tcg/configure.sh
index 57026b5899..0d864c24fc 100755
--- a/tests/tcg/configure.sh
+++ b/tests/tcg/configure.sh
@@ -225,18 +225,12 @@ for target in $target_list; do
echo "TARGET_NAME=$arch" >> $config_target_mak
echo "target=$target" >> $config_target_mak
case $target in
- *-linux-user)
- echo "CONFIG_USER_ONLY=y" >> $config_target_mak
- echo "QEMU=$PWD/qemu-$arch" >> $config_target_mak
- ;;
- *-bsd-user)
- echo "CONFIG_USER_ONLY=y" >> $config_target_mak
- echo "QEMU=$PWD/qemu-$arch" >> $config_target_mak
- ;;
*-softmmu)
- echo "CONFIG_SOFTMMU=y" >> $config_target_mak
echo "QEMU=$PWD/qemu-system-$arch" >> $config_target_mak
;;
+ *-linux-user|*-bsd-user)
+ echo "QEMU=$PWD/qemu-$arch" >> $config_target_mak
+ ;;
esac
eval "target_compiler_cflags=\${cross_cc_cflags_$arch}"
--
2.35.1
^ permalink raw reply related [flat|nested] 19+ messages in thread* [PATCH 12/17] tests/tcg: prepare Makefile.prereqs at configure time
2022-04-01 14:13 [PATCH 00/17] tests/docker and tests/tcg cleanup and diet Paolo Bonzini
` (10 preceding siblings ...)
2022-04-01 14:13 ` [PATCH 11/17] tests/tcg: remove CONFIG_USER_ONLY " Paolo Bonzini
@ 2022-04-01 14:13 ` Paolo Bonzini
2022-04-01 14:13 ` [PATCH 13/17] tests/tcg: list test targets in Makefile.prereqs Paolo Bonzini
` (5 subsequent siblings)
17 siblings, 0 replies; 19+ messages in thread
From: Paolo Bonzini @ 2022-04-01 14:13 UTC (permalink / raw)
To: qemu-devel; +Cc: richard.henderson, alex.bennee
List the dependencies of the build-tcg-tests-* and run-tcg-tests-*
targets in a Makefile fragment, without going through Makefile.prereqs's
"parsing" of config-*.mak.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220328140240.40798-12-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
tests/Makefile.include | 9 ++++++---
tests/tcg/Makefile.prereqs | 18 ------------------
tests/tcg/configure.sh | 10 ++++++++--
3 files changed, 14 insertions(+), 23 deletions(-)
delete mode 100644 tests/tcg/Makefile.prereqs
diff --git a/tests/Makefile.include b/tests/Makefile.include
index 05c534ea56..b5d0d6bc98 100644
--- a/tests/Makefile.include
+++ b/tests/Makefile.include
@@ -39,14 +39,17 @@ SPEED = quick
# Build up our target list from the filtered list of ninja targets
TARGETS=$(patsubst libqemu-%.fa, %, $(filter libqemu-%.fa, $(ninja-targets)))
+-include tests/tcg/Makefile.prereqs
+config-host.mak: $(SRC_PATH)/tests/tcg/configure.sh
+tests/tcg/Makefile.prereqs: config-host.mak
+
# Per guest TCG tests
BUILD_TCG_TARGET_RULES=$(patsubst %,build-tcg-tests-%, $(TARGETS))
CLEAN_TCG_TARGET_RULES=$(patsubst %,clean-tcg-tests-%, $(TARGETS))
RUN_TCG_TARGET_RULES=$(patsubst %,run-tcg-tests-%, $(TARGETS))
-# Probe for the Docker Builds needed for each build
-$(foreach PROBE_TARGET,$(TARGET_DIRS), \
- $(eval -include $(SRC_PATH)/tests/tcg/Makefile.prereqs))
+$(foreach TARGET,$(TARGETS), \
+ $(eval $(BUILD_DIR)/tests/tcg/config-$(TARGET).mak: config-host.mak))
$(BUILD_TCG_TARGET_RULES): build-tcg-tests-%: $(if $(CONFIG_PLUGIN),test-plugins)
$(call quiet-command,$(MAKE) $(SUBDIR_MAKEFLAGS) \
diff --git a/tests/tcg/Makefile.prereqs b/tests/tcg/Makefile.prereqs
deleted file mode 100644
index 9a29604a83..0000000000
--- a/tests/tcg/Makefile.prereqs
+++ /dev/null
@@ -1,18 +0,0 @@
-# -*- Mode: makefile -*-
-#
-# TCG Compiler Probe
-#
-# This Makefile fragment is included multiple times in the main make
-# script to probe for available compilers. This is used to build up a
-# selection of required docker targets before we invoke a sub-make for
-# each target.
-
-DOCKER_IMAGE:=
-
--include $(BUILD_DIR)/tests/tcg/config-$(PROBE_TARGET).mak
-
-ifneq ($(DOCKER_IMAGE),)
-build-tcg-tests-$(PROBE_TARGET): docker-image-$(DOCKER_IMAGE)
-endif
-$(BUILD_DIR)/tests/tcg/config_$(PROBE_TARGET).mak: config-host.mak
-config-host.mak: $(SRC_PATH)/tests/tcg/configure.sh
diff --git a/tests/tcg/configure.sh b/tests/tcg/configure.sh
index 0d864c24fc..904c351029 100755
--- a/tests/tcg/configure.sh
+++ b/tests/tcg/configure.sh
@@ -80,6 +80,8 @@ fi
: ${cross_as_tricore="tricore-as"}
: ${cross_ld_tricore="tricore-ld"}
+makefile=tests/tcg/Makefile.prereqs
+: > $makefile
for target in $target_list; do
arch=${target%%-*}
@@ -226,14 +228,17 @@ for target in $target_list; do
echo "target=$target" >> $config_target_mak
case $target in
*-softmmu)
- echo "QEMU=$PWD/qemu-system-$arch" >> $config_target_mak
+ qemu="qemu-system-$arch"
;;
*-linux-user|*-bsd-user)
- echo "QEMU=$PWD/qemu-$arch" >> $config_target_mak
+ qemu="qemu-$arch"
;;
esac
+ echo "run-tcg-tests-$target: $qemu\$(EXESUF)" >> $makefile
+
eval "target_compiler_cflags=\${cross_cc_cflags_$arch}"
+ echo "QEMU=$PWD/$qemu" >> $config_target_mak
echo "CROSS_CC_GUEST_CFLAGS=$target_compiler_cflags" >> $config_target_mak
got_cross_cc=no
@@ -329,6 +334,7 @@ for target in $target_list; do
test -n "$container_image"; then
for host in $container_hosts; do
if test "$host" = "$cpu"; then
+ echo "build-tcg-tests-$target: docker-image-$container_image" >> $makefile
echo "DOCKER_IMAGE=$container_image" >> $config_target_mak
echo "DOCKER_CROSS_CC_GUEST=$container_cross_cc" >> \
$config_target_mak
--
2.35.1
^ permalink raw reply related [flat|nested] 19+ messages in thread* [PATCH 13/17] tests/tcg: list test targets in Makefile.prereqs
2022-04-01 14:13 [PATCH 00/17] tests/docker and tests/tcg cleanup and diet Paolo Bonzini
` (11 preceding siblings ...)
2022-04-01 14:13 ` [PATCH 12/17] tests/tcg: prepare Makefile.prereqs at configure time Paolo Bonzini
@ 2022-04-01 14:13 ` Paolo Bonzini
2022-04-01 14:13 ` [PATCH 14/17] tests/tcg: invoke Makefile.target directly from QEMU's makefile Paolo Bonzini
` (4 subsequent siblings)
17 siblings, 0 replies; 19+ messages in thread
From: Paolo Bonzini @ 2022-04-01 14:13 UTC (permalink / raw)
To: qemu-devel; +Cc: richard.henderson, alex.bennee
Omit the rules altogether for targets that do not have a compiler.
Makefile.qemu now is only invoked if the tests are actually built/run.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220328140240.40798-13-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
tests/Makefile.include | 14 +++++++-------
tests/tcg/Makefile.qemu | 11 -----------
tests/tcg/configure.sh | 17 ++++++++++++-----
3 files changed, 19 insertions(+), 23 deletions(-)
diff --git a/tests/Makefile.include b/tests/Makefile.include
index b5d0d6bc98..091ca8513f 100644
--- a/tests/Makefile.include
+++ b/tests/Makefile.include
@@ -36,19 +36,16 @@ export SRC_PATH
SPEED = quick
-# Build up our target list from the filtered list of ninja targets
-TARGETS=$(patsubst libqemu-%.fa, %, $(filter libqemu-%.fa, $(ninja-targets)))
-
-include tests/tcg/Makefile.prereqs
config-host.mak: $(SRC_PATH)/tests/tcg/configure.sh
tests/tcg/Makefile.prereqs: config-host.mak
# Per guest TCG tests
-BUILD_TCG_TARGET_RULES=$(patsubst %,build-tcg-tests-%, $(TARGETS))
-CLEAN_TCG_TARGET_RULES=$(patsubst %,clean-tcg-tests-%, $(TARGETS))
-RUN_TCG_TARGET_RULES=$(patsubst %,run-tcg-tests-%, $(TARGETS))
+BUILD_TCG_TARGET_RULES=$(patsubst %,build-tcg-tests-%, $(TCG_TESTS_TARGETS))
+CLEAN_TCG_TARGET_RULES=$(patsubst %,clean-tcg-tests-%, $(TCG_TESTS_TARGETS))
+RUN_TCG_TARGET_RULES=$(patsubst %,run-tcg-tests-%, $(TCG_TESTS_TARGETS))
-$(foreach TARGET,$(TARGETS), \
+$(foreach TARGET,$(TCG_TESTS_TARGETS), \
$(eval $(BUILD_DIR)/tests/tcg/config-$(TARGET).mak: config-host.mak))
$(BUILD_TCG_TARGET_RULES): build-tcg-tests-%: $(if $(CONFIG_PLUGIN),test-plugins)
@@ -84,6 +81,9 @@ clean-tcg: $(CLEAN_TCG_TARGET_RULES)
.PHONY: check-venv check-avocado check-acceptance check-acceptance-deprecated-warning
+# Build up our target list from the filtered list of ninja targets
+TARGETS=$(patsubst libqemu-%.fa, %, $(filter libqemu-%.fa, $(ninja-targets)))
+
TESTS_VENV_DIR=$(BUILD_DIR)/tests/venv
TESTS_VENV_REQ=$(SRC_PATH)/tests/requirements.txt
TESTS_RESULTS_DIR=$(BUILD_DIR)/tests/results
diff --git a/tests/tcg/Makefile.qemu b/tests/tcg/Makefile.qemu
index 84c8543878..cda5e5a33e 100644
--- a/tests/tcg/Makefile.qemu
+++ b/tests/tcg/Makefile.qemu
@@ -95,7 +95,6 @@ all:
.PHONY: guest-tests
-ifneq ($(GUEST_BUILD),)
guest-tests: $(GUEST_BUILD)
run-guest-tests: guest-tests
@@ -105,16 +104,6 @@ run-guest-tests: guest-tests
SRC_PATH="$(SRC_PATH)" SPEED=$(SPEED) run), \
"RUN", "tests for $(TARGET_NAME)")
-else
-guest-tests:
- $(call quiet-command, true, "BUILD", \
- "$(TARGET) guest-tests SKIPPED")
-
-run-guest-tests:
- $(call quiet-command, true, "RUN", \
- "tests for $(TARGET) SKIPPED")
-endif
-
# It doesn't matter if these don't exits
.PHONY: clean-guest-tests
clean-guest-tests:
diff --git a/tests/tcg/configure.sh b/tests/tcg/configure.sh
index 904c351029..e51cd56b60 100755
--- a/tests/tcg/configure.sh
+++ b/tests/tcg/configure.sh
@@ -81,7 +81,9 @@ fi
: ${cross_ld_tricore="tricore-ld"}
makefile=tests/tcg/Makefile.prereqs
-: > $makefile
+echo "# Automatically generated by configure - do not modify" > $makefile
+
+tcg_tests_targets=
for target in $target_list; do
arch=${target%%-*}
@@ -228,6 +230,7 @@ for target in $target_list; do
echo "target=$target" >> $config_target_mak
case $target in
*-softmmu)
+ test -f $source_path/tests/tcg/$arch/Makefile.softmmu-target || continue
qemu="qemu-system-$arch"
;;
*-linux-user|*-bsd-user)
@@ -235,11 +238,7 @@ for target in $target_list; do
;;
esac
- echo "run-tcg-tests-$target: $qemu\$(EXESUF)" >> $makefile
-
eval "target_compiler_cflags=\${cross_cc_cflags_$arch}"
- echo "QEMU=$PWD/$qemu" >> $config_target_mak
- echo "CROSS_CC_GUEST_CFLAGS=$target_compiler_cflags" >> $config_target_mak
got_cross_cc=no
@@ -362,8 +361,16 @@ for target in $target_list; do
echo "CROSS_CC_HAS_I386_NOPIE=y" >> $config_target_mak
;;
esac
+ got_cross_cc=yes
break
fi
done
fi
+ if test $got_cross_cc = yes; then
+ echo "QEMU=$PWD/$qemu" >> $config_target_mak
+ echo "CROSS_CC_GUEST_CFLAGS=$target_compiler_cflags" >> $config_target_mak
+ echo "run-tcg-tests-$target: $qemu\$(EXESUF)" >> $makefile
+ tcg_tests_targets="$tcg_tests_targets $target"
+ fi
done
+echo "TCG_TESTS_TARGETS=$tcg_tests_targets" >> $makefile
--
2.35.1
^ permalink raw reply related [flat|nested] 19+ messages in thread* [PATCH 14/17] tests/tcg: invoke Makefile.target directly from QEMU's makefile
2022-04-01 14:13 [PATCH 00/17] tests/docker and tests/tcg cleanup and diet Paolo Bonzini
` (12 preceding siblings ...)
2022-04-01 14:13 ` [PATCH 13/17] tests/tcg: list test targets in Makefile.prereqs Paolo Bonzini
@ 2022-04-01 14:13 ` Paolo Bonzini
2022-04-01 14:13 ` [PATCH 15/17] tests/tcg: isolate from QEMU's config-host.mak Paolo Bonzini
` (3 subsequent siblings)
17 siblings, 0 replies; 19+ messages in thread
From: Paolo Bonzini @ 2022-04-01 14:13 UTC (permalink / raw)
To: qemu-devel; +Cc: richard.henderson, alex.bennee
Build the "docker.py cc" invocation directly in tests/tcg/configure.sh, and
remove the Makefile.qemu wrapper around Makefile.target. The config-*.mak
files now include the actual variables used when building the tests, rather
than the CROSS_* variables that Makefile.qemu used to "translate".
This is a first step towards generalizing the cross-compilation infrastructure
so that it can be used for firmware as well.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220328140240.40798-14-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
tests/Makefile.include | 36 +++++++------
tests/tcg/Makefile.qemu | 110 --------------------------------------
tests/tcg/Makefile.target | 3 +-
tests/tcg/configure.sh | 28 +++++-----
4 files changed, 33 insertions(+), 144 deletions(-)
delete mode 100644 tests/tcg/Makefile.qemu
diff --git a/tests/Makefile.include b/tests/Makefile.include
index 091ca8513f..ec84b2ebc0 100644
--- a/tests/Makefile.include
+++ b/tests/Makefile.include
@@ -48,25 +48,27 @@ RUN_TCG_TARGET_RULES=$(patsubst %,run-tcg-tests-%, $(TCG_TESTS_TARGETS))
$(foreach TARGET,$(TCG_TESTS_TARGETS), \
$(eval $(BUILD_DIR)/tests/tcg/config-$(TARGET).mak: config-host.mak))
-$(BUILD_TCG_TARGET_RULES): build-tcg-tests-%: $(if $(CONFIG_PLUGIN),test-plugins)
- $(call quiet-command,$(MAKE) $(SUBDIR_MAKEFLAGS) \
- -f $(SRC_PATH)/tests/tcg/Makefile.qemu \
- SRC_PATH=$(SRC_PATH) \
- V="$(V)" TARGET="$*" guest-tests, \
- "BUILD", "TCG tests for $*")
+.PHONY: $(TCG_TESTS_TARGETS:%=build-tcg-tests-%)
+$(TCG_TESTS_TARGETS:%=build-tcg-tests-%): build-tcg-tests-%: $(BUILD_DIR)/tests/tcg/config-%.mak
+ $(call quiet-command, \
+ $(MAKE) -C tests/tcg/$* -f ../Makefile.target $(SUBDIR_MAKEFLAGS) \
+ DOCKER_SCRIPT="$(DOCKER_SCRIPT)" \
+ TARGET="$*" SRC_PATH="$(SRC_PATH)", \
+ "BUILD","$* guest-tests")
-$(RUN_TCG_TARGET_RULES): run-tcg-tests-%: build-tcg-tests-% all
- $(call quiet-command,$(MAKE) $(SUBDIR_MAKEFLAGS) \
- -f $(SRC_PATH)/tests/tcg/Makefile.qemu \
- SRC_PATH=$(SRC_PATH) SPEED="$(SPEED)" \
- V="$(V)" TARGET="$*" run-guest-tests, \
- "RUN", "TCG tests for $*")
+.PHONY: $(TCG_TESTS_TARGETS:%=run-tcg-tests-%)
+$(TCG_TESTS_TARGETS:%=run-tcg-tests-%): run-tcg-tests-%: build-tcg-tests-% $(if $(CONFIG_PLUGIN),test-plugins)
+ $(call quiet-command, \
+ $(MAKE) -C tests/tcg/$* -f ../Makefile.target $(SUBDIR_MAKEFLAGS) \
+ TARGET="$*" SRC_PATH="$(SRC_PATH)" SPEED=$(SPEED) run, \
+ "RUN", "$* guest-tests")
-$(CLEAN_TCG_TARGET_RULES): clean-tcg-tests-%:
- $(call quiet-command,$(MAKE) $(SUBDIR_MAKEFLAGS) \
- -f $(SRC_PATH)/tests/tcg/Makefile.qemu \
- SRC_PATH=$(SRC_PATH) TARGET="$*" clean-guest-tests, \
- "CLEAN", "TCG tests for $*")
+.PHONY: $(TCG_TESTS_TARGETS:%=clean-tcg-tests-%)
+$(TCG_TESTS_TARGETS:%=clean-tcg-tests-%): clean-tcg-tests-%:
+ $(call quiet-command, \
+ $(MAKE) -C tests/tcg/$* -f ../Makefile.target $(SUBDIR_MAKEFLAGS) \
+ TARGET="$*" SRC_PATH="$(SRC_PATH)" clean, \
+ "CLEAN", "$* guest-tests")
.PHONY: build-tcg
build-tcg: $(BUILD_TCG_TARGET_RULES)
diff --git a/tests/tcg/Makefile.qemu b/tests/tcg/Makefile.qemu
deleted file mode 100644
index cda5e5a33e..0000000000
--- a/tests/tcg/Makefile.qemu
+++ /dev/null
@@ -1,110 +0,0 @@
-# -*- Mode: makefile -*-
-#
-# TCG tests (per-target rules)
-#
-# This Makefile fragment is included from the build-tcg target, once
-# for each target we build. We have two options for compiling, either
-# using a configured guest compiler or calling one of our docker images
-# to do it for us.
-#
-
-# The configure script fills in extra information about
-# useful docker images or alternative compiler flags.
-
-# Usage: $(call quiet-command,command and args,"NAME","args to print")
-# This will run "command and args", and either:
-# if V=1 just print the whole command and args
-# otherwise print the 'quiet' output in the format " NAME args to print"
-# NAME should be a short name of the command, 7 letters or fewer.
-# If called with only a single argument, will print nothing in quiet mode.
-quiet-command-run = $(if $(V),,$(if $2,printf " %-7s %s\n" $2 $3 && ))$1
-quiet-@ = $(if $(V),,@)
-quiet-command = $(quiet-@)$(call quiet-command-run,$1,$2,$3)
-
-CROSS_CC_GUEST:=
-CROSS_AS_GUEST:=
-CROSS_LD_GUEST:=
-DOCKER_IMAGE:=
-
--include tests/tcg/config-$(TARGET).mak
-
-GUEST_BUILD=
-TCG_MAKE=../Makefile.target
-
-# We also need the Docker make rules to depend on
-SKIP_DOCKER_BUILD=1
-include $(SRC_PATH)/tests/docker/Makefile.include
-
-# Support installed Cross Compilers
-
-ifdef CROSS_CC_GUEST
-
-.PHONY: cross-build-guest-tests
-cross-build-guest-tests:
- $(call quiet-command, \
- (mkdir -p tests/tcg/$(TARGET) && cd tests/tcg/$(TARGET) && \
- $(MAKE) -f $(TCG_MAKE) TARGET="$(TARGET)" CC="$(CROSS_CC_GUEST)" \
- $(if $(CROSS_AS_GUEST),AS="$(CROSS_AS_GUEST)") \
- $(if $(CROSS_LD_GUEST),LD="$(CROSS_LD_GUEST)") \
- SRC_PATH="$(SRC_PATH)" BUILD_STATIC=$(CROSS_CC_GUEST_STATIC) \
- EXTRA_CFLAGS="$(CROSS_CC_GUEST_CFLAGS)"), \
- "BUILD","$(TARGET) guest-tests with $(CROSS_CC_GUEST)")
-
-GUEST_BUILD=cross-build-guest-tests
-
-endif
-
-# Support building with Docker
-
-ifneq ($(DOCKER_IMAGE),)
-
-DOCKER_COMPILE_CMD="$(DOCKER_SCRIPT) cc \
- --cc $(DOCKER_CROSS_CC_GUEST) \
- -i qemu/$(DOCKER_IMAGE) \
- -s $(SRC_PATH) -- "
-
-DOCKER_AS_CMD=$(if $(DOCKER_CROSS_AS_GUEST),"$(DOCKER_SCRIPT) cc \
- --cc $(DOCKER_CROSS_AS_GUEST) \
- -i qemu/$(DOCKER_IMAGE) \
- -s $(SRC_PATH) -- ")
-
-DOCKER_LD_CMD=$(if $(DOCKER_CROSS_LD_GUEST),"$(DOCKER_SCRIPT) cc \
- --cc $(DOCKER_CROSS_LD_GUEST) \
- -i qemu/$(DOCKER_IMAGE) \
- -s $(SRC_PATH) -- ")
-
-
-.PHONY: docker-build-guest-tests
-docker-build-guest-tests: docker-image-$(DOCKER_IMAGE)
- $(call quiet-command, \
- (mkdir -p tests/tcg/$(TARGET) && cd tests/tcg/$(TARGET) && \
- $(MAKE) -f $(TCG_MAKE) TARGET="$(TARGET)" CC=$(DOCKER_COMPILE_CMD) \
- $(if $(DOCKER_AS_CMD),AS=$(DOCKER_AS_CMD)) \
- $(if $(DOCKER_LD_CMD),LD=$(DOCKER_LD_CMD)) \
- SRC_PATH="$(SRC_PATH)" BUILD_STATIC=y \
- EXTRA_CFLAGS="$(CROSS_CC_GUEST_CFLAGS)"), \
- "BUILD","$(TARGET) guest-tests with docker qemu/$(DOCKER_IMAGE)")
-
-GUEST_BUILD=docker-build-guest-tests
-
-endif
-
-# Final targets
-all:
- @echo "Do not invoke this Makefile directly"; exit 1
-
-.PHONY: guest-tests
-
-guest-tests: $(GUEST_BUILD)
-
-run-guest-tests: guest-tests
- $(call quiet-command, \
- (cd tests/tcg/$(TARGET) && \
- $(MAKE) -f $(TCG_MAKE) TARGET="$(TARGET)" \
- SRC_PATH="$(SRC_PATH)" SPEED=$(SPEED) run), \
- "RUN", "tests for $(TARGET_NAME)")
-
-# It doesn't matter if these don't exits
-.PHONY: clean-guest-tests
-clean-guest-tests:
- rm -rf tests/tcg/$(TARGET)
diff --git a/tests/tcg/Makefile.target b/tests/tcg/Makefile.target
index c75e8d983f..95499d8c9b 100644
--- a/tests/tcg/Makefile.target
+++ b/tests/tcg/Makefile.target
@@ -187,4 +187,5 @@ gdb-%: %
.PHONY: run
run: $(RUN_TESTS)
-# There is no clean target, the calling make just rm's the tests build dir
+clean:
+ rm -f $(TESTS) *.o
diff --git a/tests/tcg/configure.sh b/tests/tcg/configure.sh
index e51cd56b60..a577dd7ece 100755
--- a/tests/tcg/configure.sh
+++ b/tests/tcg/configure.sh
@@ -227,7 +227,6 @@ for target in $target_list; do
echo "# Automatically generated by configure - do not modify" > $config_target_mak
echo "TARGET_NAME=$arch" >> $config_target_mak
- echo "target=$target" >> $config_target_mak
case $target in
*-softmmu)
test -f $source_path/tests/tcg/$arch/Makefile.softmmu-target || continue
@@ -257,13 +256,13 @@ for target in $target_list; do
if do_compiler "$target_compiler" $target_compiler_cflags \
-o $TMPE $TMPC ; then
got_cross_cc=yes
- echo "CROSS_CC_GUEST_STATIC=y" >> $config_target_mak
- echo "CROSS_CC_GUEST=$target_compiler" >> $config_target_mak
+ echo "BUILD_STATIC=y" >> $config_target_mak
+ echo "CC=$target_compiler" >> $config_target_mak
fi
else
got_cross_cc=yes
- echo "CROSS_CC_GUEST_STATIC=y" >> $config_target_mak
- echo "CROSS_CC_GUEST=$target_compiler" >> $config_target_mak
+ echo "BUILD_STATIC=y" >> $config_target_mak
+ echo "CC=$target_compiler" >> $config_target_mak
fi
fi
fi
@@ -274,9 +273,8 @@ for target in $target_list; do
if has $target_as && has $target_ld; then
case $target in
tricore-softmmu)
- echo "CROSS_CC_GUEST=$target_as" >> $config_target_mak
- echo "CROSS_AS_GUEST=$target_as" >> $config_target_mak
- echo "CROSS_LD_GUEST=$target_ld" >> $config_target_mak
+ echo "AS=$target_as" >> $config_target_mak
+ echo "LD=$target_ld" >> $config_target_mak
got_cross_cc=yes
;;
esac
@@ -334,16 +332,13 @@ for target in $target_list; do
for host in $container_hosts; do
if test "$host" = "$cpu"; then
echo "build-tcg-tests-$target: docker-image-$container_image" >> $makefile
- echo "DOCKER_IMAGE=$container_image" >> $config_target_mak
- echo "DOCKER_CROSS_CC_GUEST=$container_cross_cc" >> \
- $config_target_mak
+ echo "BUILD_STATIC=y" >> $config_target_mak
+ echo "CC=\$(DOCKER_SCRIPT) cc --cc $container_cross_cc -i qemu/$container_image -s $source_path --" >> $config_target_mak
if test -n "$container_cross_as"; then
- echo "DOCKER_CROSS_AS_GUEST=$container_cross_as" >> \
- $config_target_mak
+ echo "AS=\$(DOCKER_SCRIPT) cc --cc $container_cross_as -i qemu/$container_image -s $source_path --" >> $config_target_mak
fi
if test -n "$container_cross_ld"; then
- echo "DOCKER_CROSS_LD_GUEST=$container_cross_ld" >> \
- $config_target_mak
+ echo "LD=\$(DOCKER_SCRIPT) cc --cc $container_cross_ld -i qemu/$container_image -s $source_path --" >> $config_target_mak
fi
case $target in
aarch64-*)
@@ -367,8 +362,9 @@ for target in $target_list; do
done
fi
if test $got_cross_cc = yes; then
+ mkdir -p tests/tcg/$target
echo "QEMU=$PWD/$qemu" >> $config_target_mak
- echo "CROSS_CC_GUEST_CFLAGS=$target_compiler_cflags" >> $config_target_mak
+ echo "EXTRA_CFLAGS=$target_compiler_cflags" >> $config_target_mak
echo "run-tcg-tests-$target: $qemu\$(EXESUF)" >> $makefile
tcg_tests_targets="$tcg_tests_targets $target"
fi
--
2.35.1
^ permalink raw reply related [flat|nested] 19+ messages in thread* [PATCH 15/17] tests/tcg: isolate from QEMU's config-host.mak
2022-04-01 14:13 [PATCH 00/17] tests/docker and tests/tcg cleanup and diet Paolo Bonzini
` (13 preceding siblings ...)
2022-04-01 14:13 ` [PATCH 14/17] tests/tcg: invoke Makefile.target directly from QEMU's makefile Paolo Bonzini
@ 2022-04-01 14:13 ` Paolo Bonzini
2022-04-01 14:13 ` [PATCH 16/17] tests/docker: remove SKIP_DOCKER_BUILD Paolo Bonzini
` (2 subsequent siblings)
17 siblings, 0 replies; 19+ messages in thread
From: Paolo Bonzini @ 2022-04-01 14:13 UTC (permalink / raw)
To: qemu-devel; +Cc: richard.henderson, alex.bennee
Do not include variables for the QEMU's own compiler, as they
are not necessarily related to the cross compiler used for tests/tcg.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
configure | 3 +--
tests/tcg/Makefile.target | 3 +--
tests/tcg/configure.sh | 5 +++++
3 files changed, 7 insertions(+), 4 deletions(-)
diff --git a/configure b/configure
index 7c08c18358..e8786d478e 100755
--- a/configure
+++ b/configure
@@ -2937,7 +2937,6 @@ echo "GENISOIMAGE=$genisoimage" >> $config_host_mak
echo "MESON=$meson" >> $config_host_mak
echo "NINJA=$ninja" >> $config_host_mak
echo "CC=$cc" >> $config_host_mak
-echo "HOST_CC=$host_cc" >> $config_host_mak
echo "AR=$ar" >> $config_host_mak
echo "AS=$as" >> $config_host_mak
echo "CCAS=$ccas" >> $config_host_mak
@@ -3057,7 +3056,7 @@ done
(for i in $cross_cc_vars; do
export $i
done
-export target_list source_path use_containers cpu
+export target_list source_path use_containers cpu host_cc
$source_path/tests/tcg/configure.sh)
# temporary config to build submodules
diff --git a/tests/tcg/Makefile.target b/tests/tcg/Makefile.target
index 95499d8c9b..f427a0304e 100644
--- a/tests/tcg/Makefile.target
+++ b/tests/tcg/Makefile.target
@@ -30,7 +30,7 @@
#
all:
--include ../../../config-host.mak
+-include ../config-host.mak
-include ../config-$(TARGET).mak
# Get semihosting definitions for user-mode emulation
@@ -77,7 +77,6 @@ EXTRA_TESTS=
# Start with a blank slate, the build targets get to add stuff first
CFLAGS=
-QEMU_CFLAGS=
LDFLAGS=
QEMU_OPTS=
diff --git a/tests/tcg/configure.sh b/tests/tcg/configure.sh
index a577dd7ece..75603fee6d 100755
--- a/tests/tcg/configure.sh
+++ b/tests/tcg/configure.sh
@@ -83,6 +83,11 @@ fi
makefile=tests/tcg/Makefile.prereqs
echo "# Automatically generated by configure - do not modify" > $makefile
+config_host_mak=tests/tcg/config-host.mak
+echo "# Automatically generated by configure - do not modify" > $config_host_mak
+echo "SRC_PATH=$source_path" >> $config_host_mak
+echo "HOST_CC=$host_cc" >> $config_host_mak
+
tcg_tests_targets=
for target in $target_list; do
arch=${target%%-*}
--
2.35.1
^ permalink raw reply related [flat|nested] 19+ messages in thread* [PATCH 16/17] tests/docker: remove SKIP_DOCKER_BUILD
2022-04-01 14:13 [PATCH 00/17] tests/docker and tests/tcg cleanup and diet Paolo Bonzini
` (14 preceding siblings ...)
2022-04-01 14:13 ` [PATCH 15/17] tests/tcg: isolate from QEMU's config-host.mak Paolo Bonzini
@ 2022-04-01 14:13 ` Paolo Bonzini
2022-04-01 14:13 ` [PATCH 17/17] tests/tcg: fix non-static build Paolo Bonzini
2022-04-11 9:59 ` [PATCH 00/17] tests/docker and tests/tcg cleanup and diet Alex Bennée
17 siblings, 0 replies; 19+ messages in thread
From: Paolo Bonzini @ 2022-04-01 14:13 UTC (permalink / raw)
To: qemu-devel; +Cc: richard.henderson, alex.bennee
It is now unused.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220328140240.40798-15-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
tests/docker/Makefile.include | 12 +-------
tests/docker/docker.py | 57 -----------------------------------
2 files changed, 1 insertion(+), 68 deletions(-)
diff --git a/tests/docker/Makefile.include b/tests/docker/Makefile.include
index eb100c294f..ca2157db46 100644
--- a/tests/docker/Makefile.include
+++ b/tests/docker/Makefile.include
@@ -33,15 +33,7 @@ $(DOCKER_SRC_COPY):
docker-qemu-src: $(DOCKER_SRC_COPY)
-# General rule for building docker images. If we are a sub-make
-# invoked with SKIP_DOCKER_BUILD we still check the image is up to date
-# though
-ifdef SKIP_DOCKER_BUILD
-docker-image-%: $(DOCKER_FILES_DIR)/%.docker
- $(call quiet-command, \
- $(DOCKER_SCRIPT) check --quiet qemu/$* $<, \
- "CHECK", "$*")
-else
+# General rule for building docker images.
docker-image-%: $(DOCKER_FILES_DIR)/%.docker
$(call quiet-command,\
$(DOCKER_SCRIPT) build -t qemu/$* -f $< \
@@ -77,8 +69,6 @@ docker-binfmt-image-debian-%: $(DOCKER_FILES_DIR)/debian-bootstrap.docker
{ echo "You will need to build $(EXECUTABLE)"; exit 1;},\
"CHECK", "debian-$* exists"))
-endif
-
# Enforce dependencies for composite images
# we don't run tests on intermediate images (used as base by another image)
DOCKER_PARTIAL_IMAGES := debian10 debian11
diff --git a/tests/docker/docker.py b/tests/docker/docker.py
index 78dd13171e..d0af2861b8 100755
--- a/tests/docker/docker.py
+++ b/tests/docker/docker.py
@@ -676,63 +676,6 @@ def run(self, args, argv):
as_user=True)
-class CheckCommand(SubCommand):
- """Check if we need to re-build a docker image out of a dockerfile.
- Arguments: <tag> <dockerfile>"""
- name = "check"
-
- def args(self, parser):
- parser.add_argument("tag",
- help="Image Tag")
- parser.add_argument("dockerfile", default=None,
- help="Dockerfile name", nargs='?')
- parser.add_argument("--checktype", choices=["checksum", "age"],
- default="checksum", help="check type")
- parser.add_argument("--olderthan", default=60, type=int,
- help="number of minutes")
-
- def run(self, args, argv):
- tag = args.tag
-
- try:
- dkr = Docker()
- except subprocess.CalledProcessError:
- print("Docker not set up")
- return 1
-
- info = dkr.inspect_tag(tag)
- if info is None:
- print("Image does not exist")
- return 1
-
- if args.checktype == "checksum":
- if not args.dockerfile:
- print("Need a dockerfile for tag:%s" % (tag))
- return 1
-
- dockerfile = _read_dockerfile(args.dockerfile)
-
- if dkr.image_matches_dockerfile(tag, dockerfile):
- if not args.quiet:
- print("Image is up to date")
- return 0
- else:
- print("Image needs updating")
- return 1
- elif args.checktype == "age":
- timestr = dkr.get_image_creation_time(info).split(".")[0]
- created = datetime.strptime(timestr, "%Y-%m-%dT%H:%M:%S")
- past = datetime.now() - timedelta(minutes=args.olderthan)
- if created < past:
- print ("Image created @ %s more than %d minutes old" %
- (timestr, args.olderthan))
- return 1
- else:
- if not args.quiet:
- print ("Image less than %d minutes old" % (args.olderthan))
- return 0
-
-
def main():
global USE_ENGINE
--
2.35.1
^ permalink raw reply related [flat|nested] 19+ messages in thread* [PATCH 17/17] tests/tcg: fix non-static build
2022-04-01 14:13 [PATCH 00/17] tests/docker and tests/tcg cleanup and diet Paolo Bonzini
` (15 preceding siblings ...)
2022-04-01 14:13 ` [PATCH 16/17] tests/docker: remove SKIP_DOCKER_BUILD Paolo Bonzini
@ 2022-04-01 14:13 ` Paolo Bonzini
2022-04-11 9:59 ` [PATCH 00/17] tests/docker and tests/tcg cleanup and diet Alex Bennée
17 siblings, 0 replies; 19+ messages in thread
From: Paolo Bonzini @ 2022-04-01 14:13 UTC (permalink / raw)
To: qemu-devel; +Cc: richard.henderson, alex.bennee
If linking with -static fails at configure time, -static should not be used
at build time either. Do not include BUILD_STATIC in $config_target_mak.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220328140240.40798-16-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
tests/tcg/configure.sh | 1 -
1 file changed, 1 deletion(-)
diff --git a/tests/tcg/configure.sh b/tests/tcg/configure.sh
index 75603fee6d..691d90abac 100755
--- a/tests/tcg/configure.sh
+++ b/tests/tcg/configure.sh
@@ -261,7 +261,6 @@ for target in $target_list; do
if do_compiler "$target_compiler" $target_compiler_cflags \
-o $TMPE $TMPC ; then
got_cross_cc=yes
- echo "BUILD_STATIC=y" >> $config_target_mak
echo "CC=$target_compiler" >> $config_target_mak
fi
else
--
2.35.1
^ permalink raw reply related [flat|nested] 19+ messages in thread* Re: [PATCH 00/17] tests/docker and tests/tcg cleanup and diet
2022-04-01 14:13 [PATCH 00/17] tests/docker and tests/tcg cleanup and diet Paolo Bonzini
` (16 preceding siblings ...)
2022-04-01 14:13 ` [PATCH 17/17] tests/tcg: fix non-static build Paolo Bonzini
@ 2022-04-11 9:59 ` Alex Bennée
17 siblings, 0 replies; 19+ messages in thread
From: Alex Bennée @ 2022-04-11 9:59 UTC (permalink / raw)
To: Paolo Bonzini; +Cc: richard.henderson, qemu-devel
Paolo Bonzini <pbonzini@redhat.com> writes:
> The first eight patches simplify and clean up a bit the
> tests/docker/Makefile.include file.
Queued to testing/next, thanks.
--
Alex Bennée
^ permalink raw reply [flat|nested] 19+ messages in thread