From: David Julian Veenstra <davidjulianveenstra@gmail.com>
To: Jonathan Cameron <jic23@kernel.org>
Cc: lars@metafoo.de, pmeerw@pmeerw.net, robh+dt@kernel.org,
Michael.Hennerich@analog.com, knaack.h@gmx.de,
daniel.baluta@nxp.com, linux-iio@vger.kernel.org,
devel@driverdev.osuosl.org, devicetree@vger.kernel.org
Subject: Re: [PATCH v2 11/13] staging: iio: Documentation: Add missing sysfs docs for angle channel
Date: Sun, 22 Apr 2018 16:41:16 +0200 [thread overview]
Message-ID: <87in8jmhgz.fsf@gmail.com> (raw)
In-Reply-To: <20180421180843.3bd3042a@archlinux>
On 21, April 2018 19:08, Jonathan Cameron wrote:
> On Fri, 20 Apr 2018 21:31:37 +0200
> David Veenstra <davidjulianveenstra@gmail.com> wrote:
>
>> The iio resolver drivers in staging use angle channels. This patch
>> add missing documentation for this type of channel.
>>
>> As was discussed in [1], radians is chosen as the unit, to match the
>> unit of angular velocity.
>>
>> [1] https://marc.info/?l=linux-driver-devel&m=152190078308330&w=2
>>
>> Signed-off-by: David Veenstra <davidjulianveenstra@gmail.com>
>> ---
>> Change in v2:
>> - Introduces in this version.
>>
>> Documentation/ABI/testing/sysfs-bus-iio | 11 +++++++++++
>> 1 file changed, 11 insertions(+)
>>
>> diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio
>> index 6a5f34b4d5b9..8ad0e55f99ee 100644
>> --- a/Documentation/ABI/testing/sysfs-bus-iio
>> +++ b/Documentation/ABI/testing/sysfs-bus-iio
>> @@ -190,6 +190,15 @@ Description:
>> but should match other such assignments on device).
>> Units after application of scale and offset are m/s^2.
>>
>> +What: /sys/bus/iio/devices/iio:deviceX/in_angl_x_raw
>> +What: /sys/bus/iio/devices/iio:deviceX/in_angl_y_raw
>> +What: /sys/bus/iio/devices/iio:deviceX/in_angl_z_raw
> This surprised me. A resolver is not going to inherently have any
> notion of a particular axis.
> Would expect.
> in_angl_raw
For the attributes that were added, I tried to match it with
the angular velocity counterpart. But it indeed doesn't make
much sense to have an axis for a resolver. I'll remove axis
modifier for v3.
Best regards,
David Veenstra
>
> Jonathan
>
>> +KernelVersion: 4.17
>> +Contact: linux-iio@vger.kernel.org
>> +Description:
>> + Angle about axis x, y or z (may be arbitrarily assigned). Units
>> + after application of scale and offset are radians.
>> +
>> What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_x_raw
>> What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_y_raw
>> What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_z_raw
>> @@ -297,6 +306,7 @@ What: /sys/bus/iio/devices/iio:deviceX/in_pressure_offset
>> What: /sys/bus/iio/devices/iio:deviceX/in_humidityrelative_offset
>> What: /sys/bus/iio/devices/iio:deviceX/in_magn_offset
>> What: /sys/bus/iio/devices/iio:deviceX/in_rot_offset
>> +What: /sys/bus/iio/devices/iio:deviceX/in_angl_offset
>> KernelVersion: 2.6.35
>> Contact: linux-iio@vger.kernel.org
>> Description:
>> @@ -350,6 +360,7 @@ What: /sys/bus/iio/devices/iio:deviceX/in_humidityrelative_scale
>> What: /sys/bus/iio/devices/iio:deviceX/in_velocity_sqrt(x^2+y^2+z^2)_scale
>> What: /sys/bus/iio/devices/iio:deviceX/in_illuminance_scale
>> What: /sys/bus/iio/devices/iio:deviceX/in_countY_scale
>> +What: /sys/bus/iio/devices/iio:deviceX/in_angl_scale
>> KernelVersion: 2.6.35
>> Contact: linux-iio@vger.kernel.org
>> Description:
WARNING: multiple messages have this Message-ID (diff)
From: David Julian Veenstra <davidjulianveenstra@gmail.com>
To: Jonathan Cameron <jic23@kernel.org>
Cc: devel@driverdev.osuosl.org, devicetree@vger.kernel.org,
lars@metafoo.de, Michael.Hennerich@analog.com,
linux-iio@vger.kernel.org, robh+dt@kernel.org, pmeerw@pmeerw.net,
knaack.h@gmx.de, daniel.baluta@nxp.com
Subject: Re: [PATCH v2 11/13] staging: iio: Documentation: Add missing sysfs docs for angle channel
Date: Sun, 22 Apr 2018 16:41:16 +0200 [thread overview]
Message-ID: <87in8jmhgz.fsf@gmail.com> (raw)
In-Reply-To: <20180421180843.3bd3042a@archlinux>
On 21, April 2018 19:08, Jonathan Cameron wrote:
> On Fri, 20 Apr 2018 21:31:37 +0200
> David Veenstra <davidjulianveenstra@gmail.com> wrote:
>
>> The iio resolver drivers in staging use angle channels. This patch
>> add missing documentation for this type of channel.
>>
>> As was discussed in [1], radians is chosen as the unit, to match the
>> unit of angular velocity.
>>
>> [1] https://marc.info/?l=linux-driver-devel&m=152190078308330&w=2
>>
>> Signed-off-by: David Veenstra <davidjulianveenstra@gmail.com>
>> ---
>> Change in v2:
>> - Introduces in this version.
>>
>> Documentation/ABI/testing/sysfs-bus-iio | 11 +++++++++++
>> 1 file changed, 11 insertions(+)
>>
>> diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio
>> index 6a5f34b4d5b9..8ad0e55f99ee 100644
>> --- a/Documentation/ABI/testing/sysfs-bus-iio
>> +++ b/Documentation/ABI/testing/sysfs-bus-iio
>> @@ -190,6 +190,15 @@ Description:
>> but should match other such assignments on device).
>> Units after application of scale and offset are m/s^2.
>>
>> +What: /sys/bus/iio/devices/iio:deviceX/in_angl_x_raw
>> +What: /sys/bus/iio/devices/iio:deviceX/in_angl_y_raw
>> +What: /sys/bus/iio/devices/iio:deviceX/in_angl_z_raw
> This surprised me. A resolver is not going to inherently have any
> notion of a particular axis.
> Would expect.
> in_angl_raw
For the attributes that were added, I tried to match it with
the angular velocity counterpart. But it indeed doesn't make
much sense to have an axis for a resolver. I'll remove axis
modifier for v3.
Best regards,
David Veenstra
>
> Jonathan
>
>> +KernelVersion: 4.17
>> +Contact: linux-iio@vger.kernel.org
>> +Description:
>> + Angle about axis x, y or z (may be arbitrarily assigned). Units
>> + after application of scale and offset are radians.
>> +
>> What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_x_raw
>> What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_y_raw
>> What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_z_raw
>> @@ -297,6 +306,7 @@ What: /sys/bus/iio/devices/iio:deviceX/in_pressure_offset
>> What: /sys/bus/iio/devices/iio:deviceX/in_humidityrelative_offset
>> What: /sys/bus/iio/devices/iio:deviceX/in_magn_offset
>> What: /sys/bus/iio/devices/iio:deviceX/in_rot_offset
>> +What: /sys/bus/iio/devices/iio:deviceX/in_angl_offset
>> KernelVersion: 2.6.35
>> Contact: linux-iio@vger.kernel.org
>> Description:
>> @@ -350,6 +360,7 @@ What: /sys/bus/iio/devices/iio:deviceX/in_humidityrelative_scale
>> What: /sys/bus/iio/devices/iio:deviceX/in_velocity_sqrt(x^2+y^2+z^2)_scale
>> What: /sys/bus/iio/devices/iio:deviceX/in_illuminance_scale
>> What: /sys/bus/iio/devices/iio:deviceX/in_countY_scale
>> +What: /sys/bus/iio/devices/iio:deviceX/in_angl_scale
>> KernelVersion: 2.6.35
>> Contact: linux-iio@vger.kernel.org
>> Description:
next prev parent reply other threads:[~2018-04-22 14:41 UTC|newest]
Thread overview: 66+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-04-20 19:28 [PATCH v2 00/13] staging: iio: ad2s1200: Driver clean up David Veenstra
2018-04-20 19:28 ` David Veenstra
2018-04-20 19:28 ` [PATCH v2 01/13] staging: iio: ad2s1200: Remove unneeded include David Veenstra
2018-04-20 19:28 ` David Veenstra
2018-04-21 16:45 ` Jonathan Cameron
2018-04-21 16:45 ` Jonathan Cameron
2018-04-20 19:28 ` [PATCH v2 02/13] staging: iio: ad2s1200: Sort includes alphabetically David Veenstra
2018-04-20 19:28 ` David Veenstra
2018-04-21 16:46 ` Jonathan Cameron
2018-04-21 16:46 ` Jonathan Cameron
2018-04-20 19:29 ` [PATCH v2 03/13] staging: iio: ad2s1200: Reverse Christmas tree ordering David Veenstra
2018-04-20 19:29 ` David Veenstra
2018-04-21 16:46 ` Jonathan Cameron
2018-04-21 16:46 ` Jonathan Cameron
2018-04-20 19:29 ` [PATCH v2 04/13] staging: iio: ad2s1200: Add blank lines David Veenstra
2018-04-20 19:29 ` David Veenstra
2018-04-21 16:47 ` Jonathan Cameron
2018-04-21 16:47 ` Jonathan Cameron
2018-04-20 19:30 ` [PATCH v2 05/13] staging: iio: ad2s1200: Add kernel docs to driver state David Veenstra
2018-04-20 19:30 ` David Veenstra
2018-04-21 16:49 ` Jonathan Cameron
2018-04-21 16:49 ` Jonathan Cameron
2018-04-22 14:26 ` David Julian Veenstra
2018-04-22 14:26 ` David Julian Veenstra
2018-04-20 19:30 ` [PATCH v2 06/13] staging: iio: ad2s1200: Introduce variable for repeated value David Veenstra
2018-04-20 19:30 ` David Veenstra
2018-04-21 16:50 ` Jonathan Cameron
2018-04-21 16:50 ` Jonathan Cameron
2018-04-22 14:29 ` David Julian Veenstra
2018-04-22 14:29 ` David Julian Veenstra
2018-04-20 19:30 ` [PATCH v2 07/13] staging: iio: ad2s1200: Improve readability with be16_to_cpup David Veenstra
2018-04-20 19:30 ` David Veenstra
2018-04-21 16:55 ` Jonathan Cameron
2018-04-21 16:55 ` Jonathan Cameron
2018-04-22 14:31 ` David Julian Veenstra
2018-04-22 14:31 ` David Julian Veenstra
2018-04-20 19:30 ` [PATCH v2 08/13] staging: iio: ad2s1200: Replace legacy gpio API with modern API David Veenstra
2018-04-20 19:30 ` David Veenstra
2018-04-21 16:58 ` Jonathan Cameron
2018-04-21 16:58 ` Jonathan Cameron
2018-04-22 14:32 ` David Julian Veenstra
2018-04-22 14:32 ` David Julian Veenstra
2018-04-20 19:30 ` [PATCH v2 09/13] staging: iio: ad2s1200: Add documentation for device tree binding David Veenstra
2018-04-20 19:30 ` David Veenstra
2018-04-21 17:03 ` Jonathan Cameron
2018-04-21 17:03 ` Jonathan Cameron
2018-04-20 19:31 ` [PATCH v2 10/13] staging: iio: ad2s1200: Add scaling factor for angular velocity channel David Veenstra
2018-04-20 19:31 ` David Veenstra
2018-04-21 17:07 ` Jonathan Cameron
2018-04-21 17:07 ` Jonathan Cameron
2018-04-22 14:37 ` David Julian Veenstra
2018-04-22 14:37 ` David Julian Veenstra
2018-04-20 19:31 ` [PATCH v2 11/13] staging: iio: Documentation: Add missing sysfs docs for angle channel David Veenstra
2018-04-20 19:31 ` David Veenstra
2018-04-21 17:08 ` Jonathan Cameron
2018-04-21 17:08 ` Jonathan Cameron
2018-04-22 14:41 ` David Julian Veenstra [this message]
2018-04-22 14:41 ` David Julian Veenstra
2018-04-20 19:31 ` [PATCH v2 12/13] staging: iio: ad2s1200: Add scaling factor " David Veenstra
2018-04-20 19:31 ` David Veenstra
2018-04-21 17:10 ` Jonathan Cameron
2018-04-21 17:10 ` Jonathan Cameron
2018-04-20 19:32 ` [PATCH v2 13/13] staging: iio: ad2s1200: Move driver out of staging David Veenstra
2018-04-20 19:32 ` David Veenstra
2018-04-21 17:11 ` Jonathan Cameron
2018-04-21 17:11 ` Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87in8jmhgz.fsf@gmail.com \
--to=davidjulianveenstra@gmail.com \
--cc=Michael.Hennerich@analog.com \
--cc=daniel.baluta@nxp.com \
--cc=devel@driverdev.osuosl.org \
--cc=devicetree@vger.kernel.org \
--cc=jic23@kernel.org \
--cc=knaack.h@gmx.de \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
--cc=pmeerw@pmeerw.net \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.