* [PATCH] ARM: mvebu: Add DT entry for ReadyNAS Duo v2 to use gpio-poweroff driver @ 2013-11-21 23:10 ` Arnaud Ebalard 0 siblings, 0 replies; 4+ messages in thread From: Arnaud Ebalard @ 2013-11-21 23:10 UTC (permalink / raw) To: linux-arm-kernel Without that fix, at the end of the shutdown process, the board is still powered (led glowing, fan running, ...). Signed-off-by: Arnaud Ebalard <arno@natisbad.org> --- Hi, I have prepared some cleanup patches for existing ReadyNAS .dts files which I intend to send for review in the next fex days. The GPIO voltage level is still a value below but the cleanup patch for this .dts will handle that globally. arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts b/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts index e6a102c..4e3cae1 100644 --- a/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts +++ b/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts @@ -60,6 +60,10 @@ marvell,pins = "mpp29"; marvell,function = "gpio"; }; + pmx_poweroff: pmx-poweroff { + marvell,pins = "mpp30"; + marvell,function = "gpio"; + }; }; clocks { @@ -158,6 +162,13 @@ }; }; + gpio-poweroff { + compatible = "gpio-poweroff"; + pinctrl-0 = <&pmx_poweroff>; + pinctrl-names = "default"; + gpios = <&gpio0 30 1>; + }; + regulators { compatible = "simple-bus"; #address-cells = <1>; -- 1.8.4.rc3 ^ permalink raw reply related [flat|nested] 4+ messages in thread
* [PATCH] ARM: mvebu: Add DT entry for ReadyNAS Duo v2 to use gpio-poweroff driver @ 2013-11-21 23:10 ` Arnaud Ebalard 0 siblings, 0 replies; 4+ messages in thread From: Arnaud Ebalard @ 2013-11-21 23:10 UTC (permalink / raw) To: Jason Cooper, Andrew Lunn, Gregory Clement, Sebastian Hesselbarth Cc: Russell King, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, Rob Herring, Pawel Moll, Mark Rutland, Stephen Warren, Ian Campbell, devicetree-u79uwXL29TY76Z2rM5mHXA Without that fix, at the end of the shutdown process, the board is still powered (led glowing, fan running, ...). Signed-off-by: Arnaud Ebalard <arno-LkuqDEemtHBg9hUCZPvPmw@public.gmane.org> --- Hi, I have prepared some cleanup patches for existing ReadyNAS .dts files which I intend to send for review in the next fex days. The GPIO voltage level is still a value below but the cleanup patch for this .dts will handle that globally. arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts b/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts index e6a102c..4e3cae1 100644 --- a/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts +++ b/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts @@ -60,6 +60,10 @@ marvell,pins = "mpp29"; marvell,function = "gpio"; }; + pmx_poweroff: pmx-poweroff { + marvell,pins = "mpp30"; + marvell,function = "gpio"; + }; }; clocks { @@ -158,6 +162,13 @@ }; }; + gpio-poweroff { + compatible = "gpio-poweroff"; + pinctrl-0 = <&pmx_poweroff>; + pinctrl-names = "default"; + gpios = <&gpio0 30 1>; + }; + regulators { compatible = "simple-bus"; #address-cells = <1>; -- 1.8.4.rc3 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply related [flat|nested] 4+ messages in thread
* [PATCH] ARM: mvebu: Add DT entry for ReadyNAS Duo v2 to use gpio-poweroff driver @ 2013-11-22 13:41 ` Jason Cooper 0 siblings, 0 replies; 4+ messages in thread From: Jason Cooper @ 2013-11-22 13:41 UTC (permalink / raw) To: linux-arm-kernel On Fri, Nov 22, 2013 at 12:10:25AM +0100, Arnaud Ebalard wrote: > > Without that fix, at the end of the shutdown process, the board is > still powered (led glowing, fan running, ...). > > Signed-off-by: Arnaud Ebalard <arno@natisbad.org> > --- > Hi, > > I have prepared some cleanup patches for existing ReadyNAS .dts files > which I intend to send for review in the next fex days. The GPIO > voltage level is still a value below but the cleanup patch for this > .dts will handle that globally. > > arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts | 11 +++++++++++ > 1 file changed, 11 insertions(+) > > diff --git a/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts b/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts > index e6a102c..4e3cae1 100644 > --- a/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts > +++ b/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts > @@ -60,6 +60,10 @@ > marvell,pins = "mpp29"; > marvell,function = "gpio"; > }; > + pmx_poweroff: pmx-poweroff { > + marvell,pins = "mpp30"; > + marvell,function = "gpio"; > + }; > }; > > clocks { > @@ -158,6 +162,13 @@ > }; > }; > > + gpio-poweroff { > + compatible = "gpio-poweroff"; > + pinctrl-0 = <&pmx_poweroff>; > + pinctrl-names = "default"; > + gpios = <&gpio0 30 1>; GPIO_... ? thx, Jason. ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] ARM: mvebu: Add DT entry for ReadyNAS Duo v2 to use gpio-poweroff driver @ 2013-11-22 13:41 ` Jason Cooper 0 siblings, 0 replies; 4+ messages in thread From: Jason Cooper @ 2013-11-22 13:41 UTC (permalink / raw) To: Arnaud Ebalard Cc: Andrew Lunn, Gregory Clement, Sebastian Hesselbarth, Russell King, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, Rob Herring, Pawel Moll, Mark Rutland, Stephen Warren, Ian Campbell, devicetree-u79uwXL29TY76Z2rM5mHXA On Fri, Nov 22, 2013 at 12:10:25AM +0100, Arnaud Ebalard wrote: > > Without that fix, at the end of the shutdown process, the board is > still powered (led glowing, fan running, ...). > > Signed-off-by: Arnaud Ebalard <arno-LkuqDEemtHBg9hUCZPvPmw@public.gmane.org> > --- > Hi, > > I have prepared some cleanup patches for existing ReadyNAS .dts files > which I intend to send for review in the next fex days. The GPIO > voltage level is still a value below but the cleanup patch for this > .dts will handle that globally. > > arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts | 11 +++++++++++ > 1 file changed, 11 insertions(+) > > diff --git a/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts b/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts > index e6a102c..4e3cae1 100644 > --- a/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts > +++ b/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts > @@ -60,6 +60,10 @@ > marvell,pins = "mpp29"; > marvell,function = "gpio"; > }; > + pmx_poweroff: pmx-poweroff { > + marvell,pins = "mpp30"; > + marvell,function = "gpio"; > + }; > }; > > clocks { > @@ -158,6 +162,13 @@ > }; > }; > > + gpio-poweroff { > + compatible = "gpio-poweroff"; > + pinctrl-0 = <&pmx_poweroff>; > + pinctrl-names = "default"; > + gpios = <&gpio0 30 1>; GPIO_... ? thx, Jason. -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2013-11-22 13:41 UTC | newest] Thread overview: 4+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2013-11-21 23:10 [PATCH] ARM: mvebu: Add DT entry for ReadyNAS Duo v2 to use gpio-poweroff driver Arnaud Ebalard 2013-11-21 23:10 ` Arnaud Ebalard 2013-11-22 13:41 ` Jason Cooper 2013-11-22 13:41 ` Jason Cooper
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.