[parisc-linux] Shared native toolchain (and Perl) uploaded, dpkg tarball, Debian packages

[parisc-linux] Shared native toolchain (and Perl) uploaded, dpkg tarball, Debian packages

[David Huggins-Daines]

Well, it had to happen eventually.

I'm pleased to report that I have a working Perl tarball for PA-RISC
Linux, which means that the dpkg-dev programs and other random Debian
bits that are written in Perl are now functional, which means that we
can build Debian packages!

The toolchain and shared C libraries:

ftp://puffin.external.hp.com/pub/parisc/binaries/userspace/gcc-20000914.tgz
ftp://puffin.external.hp.com/pub/parisc/binaries/userspace/binutils-20000914.tgz
ftp://puffin.external.hp.com/pub/parisc/binaries/userspace/glibc-20000914.tgz

Make sure to remove any existing /usr/hppa-linux directory before
untarring the binutils, or you will get "cannot find crt1.o" from when
linking.

Perl (and gdbm, which it requires):

ftp://puffin.external.hp.com/pub/parisc/binaries/userspace/perl-20000914.tgz
ftp://puffin.external.hp.com/pub/parisc/binaries/userspace/gdbm-20000915.tgz

You will need to run 'ln perl5.00503 perl5.005; ln perl5.00503
perl-5.005' after untarring that to satisfy some scripts.

dpkg:

http://puffin.external.hp.com/~dhd/debian-hppa/dpkg-1.7.0_hppa.nondebbin.tar.gz

You'll have to touch /var/lib/dpkg/available and /var/lib/dpkg/status
for dpkg to work.

It of course goes without saying that to have a useful development
environment you need to have a bunch of other stuff, like shellutils,
textutils, ncurses, ash, etc, etc, etc.  We'll be putting together a
new base system tarball shortly.  Until then you're on your own :(

Pending a proper Debian archive on p.e.h.c, I've started collecting
packages at http://puffin.external.hp.com/~dhd/debian-hppa/.  If they
don't install then use dpkg --force-deps.

-- 
dhd@linuxcare.com, http://www.linuxcare.com/
Linuxcare. Support for the revolution.

Re: [parisc-linux] Shared native toolchain (and Perl) uploaded, dpkg tarball, Debian packages

[Andrew Shugg]

David Huggins-Daines said:
[ lots of good stuff ]
> ftp://puffin.external.hp.com/pub/parisc/binaries/userspace/perl-20000914.tgz

I don't see this one ... not in that directory, not in ./old/ or ../tgz/
either.  Was it taken down or did it not quite make it up?  =)

Andrew.

--
Andrew Shugg <andrew@neep.com.au>                http://www.neep.com.au/

  "Just remember Basil, there's always someone worse off than yourself."
  "Oh, really?  I'd like to meet him ... I could do with a good laugh."
                 [ Sybil and Basil Fawlty, "Fawlty Towers" ]

Re: [parisc-linux] Shared native toolchain (and Perl) uploaded, dpkg tarball, Debian packages

[David Huggins-Daines]

Andrew Shugg <andrew@neep.com.au> writes:

> David Huggins-Daines said:
> [ lots of good stuff ]
> > ftp://puffin.external.hp.com/pub/parisc/binaries/userspace/perl-20000914.tgz
> 
> I don't see this one ... not in that directory, not in ./old/ or ../tgz/
> either.  Was it taken down or did it not quite make it up?  =)

Oops.  My public_html dir is 403 too.  Chalk it up to working at 3AM.

Should be fixed now.

-- 
dhd@linuxcare.com, http://www.linuxcare.com/
Linuxcare. Support for the revolution.

New Cross-Compiler, userspace tarballs, and Debian packages (was Re: [parisc-linux] Shared native toolchain (and Perl) uploaded, dpkg tarball, Debian packages)

[Matt Taggart]

I have put a new LinuxX86 -> hppa/hppa64 cross-compiler tarball at,

ftp://puffin.external.hp.com/pub/parisc/binaries/LinuxX86/xc-20000915.tar.gz

This tarball contains 32 bit binutils, gcc, and glibc and 64 bit binutils and 
gcc. So you can use it to compile both 32 bit userspace apps and 32 bit and 64 
bit kernels.

David Huggins-Daines writes...

> Pending a proper Debian archive on p.e.h.c, I've started collecting
> packages at http://puffin.external.hp.com/~dhd/debian-hppa/.  If they
> don't install then use dpkg --force-deps.

I've created a semi-proper debian archive accessible at,

http://puffin.external.hp.com/debian-hppa
and
ftp://puffin.external.hp.com/pub/debian-hppa

and I have added debs for all the things I've been cross compiling that David 
has not build native debs for.

I have also made the same available as tarballs in,

ftp://puffin.external.hp.com/pub/parisc/binaries/userspace/

Thanks,

-- 
Matt Taggart
taggart@fc.hp.com

Re: [parisc-linux] Shared native toolchain (and Perl) uploaded, dpkg tarball, Debian packages

[Andrew Shugg]

David Huggins-Daines said:
> Perl (and gdbm, which it requires):
> 
> ftp://puffin.external.hp.com/pub/parisc/binaries/userspace/perl-20000914.tgz
> ftp://puffin.external.hp.com/pub/parisc/binaries/userspace/gdbm-20000915.tgz
> 
> You will need to run 'ln perl5.00503 perl5.005; ln perl5.00503
> perl-5.005' after untarring that to satisfy some scripts.

A quick note for those who might just be cut & pasting the URLs to
ncftpget like I was ... the perl tarball ends with 'tar.gz' not 'tgz'.

Andrew.

--
Andrew Shugg <andrew@neep.com.au>                http://www.neep.com.au/

  "Just remember Basil, there's always someone worse off than yourself."
  "Oh, really?  I'd like to meet him ... I could do with a good laugh."
                 [ Sybil and Basil Fawlty, "Fawlty Towers" ]

Re: New Cross-Compiler, userspace tarballs, and Debian packages (was Re: [parisc-linux] Shared native toolchain (and Perl) uploaded, dpkg tarball, Debian packages)

[David Huggins-Daines]

Matt Taggart <taggart@carmen.fc.hp.com> writes:

> and I have added debs for all the things I've been cross compiling that David 
> has not build native debs for.

I went and made this apt-able.  (Yes, we have apt now, you need the
latest glibc and gcc tarballs to run it though).  The correct
sources.list invocation for it is:

deb http://puffin.external.hp.com/ debian-hppa/

Matt: I put dpkg-scanpackages and other dpkg programs and libs in
~dhd/{bin,lib}, if you want to use them.

-- 
dhd@linuxcare.com, http://www.linuxcare.com/
Linuxcare. Support for the revolution.

Re: New Cross-Compiler, userspace tarballs, and Debian packages...

[Grant Grundler]

David Huggins-Daines wrote:
...
> I went and made this apt-able.  (Yes, we have apt now, you need the
> latest glibc and gcc tarballs to run it though).

Mott or David,
Do we have a recipe to install all the stuff posted so far?

I'm pretty sure the README.INSTALL on the v0.1 CD isn't useful
for apt-getting. I can help develope/update to a new install recipe.

I'm still using NFSROOT and feel "behind the times" despite being
in the middle of most of the developement. I suspect many others
could help us test/use/build on their respective boxes if the
install process were obvious.

thanks,
grant

Grant Grundler
Unix Systems Enablement Lab
+1.408.447.7253