[RESEND PATCH 2/4] arm64: dts: marvell: add thermal-zone node in ap806 DTSI file

[gregory.clement@bootlin.com (Gregory CLEMENT)]

Hi Miquel,
 
 On jeu., ao?t 30 2018, Miquel Raynal <miquel.raynal@bootlin.com> wrote:

> Add a thermal-zone node and fill in all the sensors available in an
> ap806 (one in the IC plus one per CPU).
>
> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>

Applied on mvebu/dt64

Thanks,

Gregory

> ---
>  arch/arm64/boot/dts/marvell/armada-ap806.dtsi | 60 +++++++++++++++++++
>  1 file changed, 60 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
> index 3da3a13f7ee1..7d94c1fa592a 100644
> --- a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
> +++ b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
> @@ -6,6 +6,7 @@
>   */
>  
>  #include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/thermal/thermal.h>
>  
>  /dts-v1/;
>  
> @@ -265,8 +266,67 @@
>  				ap_thermal: thermal-sensor at 80 {
>  					compatible = "marvell,armada-ap806-thermal";
>  					reg = <0x80 0x10>;
> +					#thermal-sensor-cells = <1>;
>  				};
>  			};
>  		};
>  	};
> +
> +	/*
> +	 * The thermal IP features one internal sensor plus, if applicable, one
> +	 * remote channel wired to one sensor per CPU.
> +	 *
> +	 * The cooling maps are always empty as there are no cooling devices.
> +	 */
> +	thermal-zones {
> +		ap_thermal_ic: ap-thermal-ic {
> +			polling-delay-passive = <1000>;
> +			polling-delay = <1000>;
> +
> +			thermal-sensors = <&ap_thermal 0>;
> +
> +			trips {	};
> +			cooling-maps { };
> +		};
> +
> +		ap_thermal_cpu1: ap-thermal-cpu1 {
> +			polling-delay-passive = <1000>;
> +			polling-delay = <1000>;
> +
> +			thermal-sensors = <&ap_thermal 1>;
> +
> +			trips { };
> +			cooling-maps { };
> +		};
> +
> +		ap_thermal_cpu2: ap-thermal-cpu2 {
> +			polling-delay-passive = <1000>;
> +			polling-delay = <1000>;
> +
> +			thermal-sensors = <&ap_thermal 2>;
> +
> +			trips { };
> +			cooling-maps { };
> +		};
> +
> +		ap_thermal_cpu3: ap-thermal-cpu3 {
> +			polling-delay-passive = <1000>;
> +			polling-delay = <1000>;
> +
> +			thermal-sensors = <&ap_thermal 3>;
> +
> +			trips { };
> +			cooling-maps { };
> +		};
> +
> +		ap_thermal_cpu4: ap-thermal-cpu4 {
> +			polling-delay-passive = <1000>;
> +			polling-delay = <1000>;
> +
> +			thermal-sensors = <&ap_thermal 4>;
> +
> +			trips { };
> +			cooling-maps { };
> +		};
> +	};
>  };
> -- 
> 2.17.1
>

-- 
Gregory Clement, Bootlin
Embedded Linux and Kernel engineering
http://bootlin.com