From: Charalampos Mitrodimas <charmitro@posteo.net>
To: Fabio Estevam <festevam@gmail.com>
Cc: heiko@sntech.de, robh@kernel.org, krzk+dt@kernel.org,
conor+dt@kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-rockchip@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH 1/2] ARM: dts: rockchip: rk3036: Move PHY reset to ethernet-phy node
Date: Sat, 28 Feb 2026 11:44:21 +0000 [thread overview]
Message-ID: <87ldgdjdnx.fsf@posteo.net> (raw)
In-Reply-To: <20260228013257.256973-1-festevam@gmail.com>
Fabio Estevam <festevam@gmail.com> writes:
> According to rockchip,emac.yaml, 'phy-reset-duration' and 'phy-reset-gpios'
> are not valid properties.
>
> Use the valid 'reset-gpios' and 'reset-assert-us' properties under
> the etherne-phy node.
>
> This fixes the following dt-schema warning:
>
> Unevaluated properties are not allowed ('phy-reset-duration',
> 'phy-reset-gpios' were unexpected)
>
> Signed-off-by: Fabio Estevam <festevam@gmail.com>
> ---
> arch/arm/boot/dts/rockchip/rk3036-evb.dts | 4 ++--
> arch/arm/boot/dts/rockchip/rk3036-kylin.dts | 4 ++--
> 2 files changed, 4 insertions(+), 4 deletions(-)
Does this need a "Fixes:" tag (haven't checked)? And could stable benefit
from this?
Cheers,
C. Mitrodimas
>
> diff --git a/arch/arm/boot/dts/rockchip/rk3036-evb.dts b/arch/arm/boot/dts/rockchip/rk3036-evb.dts
> index becdc0b664bf..c8100dc4c7ce 100644
> --- a/arch/arm/boot/dts/rockchip/rk3036-evb.dts
> +++ b/arch/arm/boot/dts/rockchip/rk3036-evb.dts
> @@ -16,8 +16,6 @@ memory@60000000 {
>
> &emac {
> phy = <&phy0>;
> - phy-reset-duration = <10>; /* millisecond */
> - phy-reset-gpios = <&gpio2 RK_PC6 GPIO_ACTIVE_LOW>; /* PHY_RST */
> pinctrl-names = "default";
> pinctrl-0 = <&emac_xfer>, <&emac_mdio>;
> status = "okay";
> @@ -28,6 +26,8 @@ mdio {
>
> phy0: ethernet-phy@0 {
> reg = <0>;
> + reset-gpios = <&gpio2 RK_PC6 GPIO_ACTIVE_LOW>;
> + reset-assert-us = <10000>;
> };
> };
> };
> diff --git a/arch/arm/boot/dts/rockchip/rk3036-kylin.dts b/arch/arm/boot/dts/rockchip/rk3036-kylin.dts
> index ae2f84a4e922..bc6e6468fcc4 100644
> --- a/arch/arm/boot/dts/rockchip/rk3036-kylin.dts
> +++ b/arch/arm/boot/dts/rockchip/rk3036-kylin.dts
> @@ -102,8 +102,6 @@ &acodec {
>
> &emac {
> phy = <&phy0>;
> - phy-reset-duration = <10>; /* millisecond */
> - phy-reset-gpios = <&gpio2 RK_PC6 GPIO_ACTIVE_LOW>; /* PHY_RST */
> pinctrl-names = "default";
> pinctrl-0 = <&emac_xfer>, <&emac_mdio>;
> status = "okay";
> @@ -114,6 +112,8 @@ mdio {
>
> phy0: ethernet-phy@0 {
> reg = <0>;
> + reset-gpios = <&gpio2 RK_PC6 GPIO_ACTIVE_LOW>;
> + reset-assert-us = <10000>;
> };
> };
> };
WARNING: multiple messages have this Message-ID (diff)
From: Charalampos Mitrodimas <charmitro@posteo.net>
To: Fabio Estevam <festevam@gmail.com>
Cc: heiko@sntech.de, robh@kernel.org, krzk+dt@kernel.org,
conor+dt@kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-rockchip@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH 1/2] ARM: dts: rockchip: rk3036: Move PHY reset to ethernet-phy node
Date: Sat, 28 Feb 2026 11:44:21 +0000 [thread overview]
Message-ID: <87ldgdjdnx.fsf@posteo.net> (raw)
In-Reply-To: <20260228013257.256973-1-festevam@gmail.com>
Fabio Estevam <festevam@gmail.com> writes:
> According to rockchip,emac.yaml, 'phy-reset-duration' and 'phy-reset-gpios'
> are not valid properties.
>
> Use the valid 'reset-gpios' and 'reset-assert-us' properties under
> the etherne-phy node.
>
> This fixes the following dt-schema warning:
>
> Unevaluated properties are not allowed ('phy-reset-duration',
> 'phy-reset-gpios' were unexpected)
>
> Signed-off-by: Fabio Estevam <festevam@gmail.com>
> ---
> arch/arm/boot/dts/rockchip/rk3036-evb.dts | 4 ++--
> arch/arm/boot/dts/rockchip/rk3036-kylin.dts | 4 ++--
> 2 files changed, 4 insertions(+), 4 deletions(-)
Does this need a "Fixes:" tag (haven't checked)? And could stable benefit
from this?
Cheers,
C. Mitrodimas
>
> diff --git a/arch/arm/boot/dts/rockchip/rk3036-evb.dts b/arch/arm/boot/dts/rockchip/rk3036-evb.dts
> index becdc0b664bf..c8100dc4c7ce 100644
> --- a/arch/arm/boot/dts/rockchip/rk3036-evb.dts
> +++ b/arch/arm/boot/dts/rockchip/rk3036-evb.dts
> @@ -16,8 +16,6 @@ memory@60000000 {
>
> &emac {
> phy = <&phy0>;
> - phy-reset-duration = <10>; /* millisecond */
> - phy-reset-gpios = <&gpio2 RK_PC6 GPIO_ACTIVE_LOW>; /* PHY_RST */
> pinctrl-names = "default";
> pinctrl-0 = <&emac_xfer>, <&emac_mdio>;
> status = "okay";
> @@ -28,6 +26,8 @@ mdio {
>
> phy0: ethernet-phy@0 {
> reg = <0>;
> + reset-gpios = <&gpio2 RK_PC6 GPIO_ACTIVE_LOW>;
> + reset-assert-us = <10000>;
> };
> };
> };
> diff --git a/arch/arm/boot/dts/rockchip/rk3036-kylin.dts b/arch/arm/boot/dts/rockchip/rk3036-kylin.dts
> index ae2f84a4e922..bc6e6468fcc4 100644
> --- a/arch/arm/boot/dts/rockchip/rk3036-kylin.dts
> +++ b/arch/arm/boot/dts/rockchip/rk3036-kylin.dts
> @@ -102,8 +102,6 @@ &acodec {
>
> &emac {
> phy = <&phy0>;
> - phy-reset-duration = <10>; /* millisecond */
> - phy-reset-gpios = <&gpio2 RK_PC6 GPIO_ACTIVE_LOW>; /* PHY_RST */
> pinctrl-names = "default";
> pinctrl-0 = <&emac_xfer>, <&emac_mdio>;
> status = "okay";
> @@ -114,6 +112,8 @@ mdio {
>
> phy0: ethernet-phy@0 {
> reg = <0>;
> + reset-gpios = <&gpio2 RK_PC6 GPIO_ACTIVE_LOW>;
> + reset-assert-us = <10000>;
> };
> };
> };
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip
next prev parent reply other threads:[~2026-02-28 11:44 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-02-28 1:32 [PATCH 1/2] ARM: dts: rockchip: rk3036: Move PHY reset to ethernet-phy node Fabio Estevam
2026-02-28 1:32 ` Fabio Estevam
2026-02-28 1:32 ` [PATCH 2/2] ARM: dts: rockchip: rk3288: Remove rockchip,grf from tsadc Fabio Estevam
2026-02-28 1:32 ` Fabio Estevam
2026-02-28 11:40 ` [PATCH 1/2] ARM: dts: rockchip: rk3036: Move PHY reset to ethernet-phy node Heiko Stuebner
2026-02-28 11:40 ` Heiko Stuebner
2026-02-28 12:15 ` Fabio Estevam
2026-02-28 12:15 ` Fabio Estevam
2026-03-02 10:36 ` Heiko Stuebner
2026-03-02 10:36 ` Heiko Stuebner
2026-02-28 11:44 ` Charalampos Mitrodimas [this message]
2026-02-28 11:44 ` Charalampos Mitrodimas
2026-02-28 12:04 ` (subset) " Heiko Stuebner
2026-02-28 12:04 ` Heiko Stuebner
2026-03-02 11:39 ` Heiko Stuebner
2026-03-02 11:39 ` Heiko Stuebner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87ldgdjdnx.fsf@posteo.net \
--to=charmitro@posteo.net \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=heiko@sntech.de \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.