* ath10k-firmware: QCA4019 hw1.0: Add Linksys WHW03V2 specific BDFs [not found] <CA+RD57PNNMFfkZ5ysh646A1Qde17x3qitqWhnXbRpFkYAYYuoQ@mail.gmail.com> @ 2022-12-20 19:32 ` Vincent Tremblay [not found] ` <CA+RD57Mv6FJwOKLo0JcJoMEZ3A22bZ8e4Fvhhzpjdn2r-Q1yrw@mail.gmail.com> 2023-03-17 11:42 ` ath10k-firmware: QCA4019 hw1.0: " Kalle Valo 0 siblings, 2 replies; 4+ messages in thread From: Vincent Tremblay @ 2022-12-20 19:32 UTC (permalink / raw) To: ath10k [-- Attachment #1: Type: text/plain, Size: 953 bytes --] Hi, This is a set of files for the Linksys WHW03V2 that are currently missing from the repository. * description for what hardware this is: - it is a IPQ4019 based board - one QCA40xx radio is used as 2.4GHz radio - one QCA40xx radio is used as 5GHz radio * origin of the board file (did you create it yourself or where you downloaded): They were extracted from the vendor firmware (version 2.1.19.209783). The files can be found in the folder "/lib/firmware/IPQ4019/v2/FCC". * ids to be used with the board file (ATH10K_BD_IE_BOARD_NAME in ath10k): bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=linksys-whw03v2.bin md5sum: 0435269fbb0797bf269b8cb0591e7544 bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=linksys-whw03v2.bin md5sum: 79042d093e81a43c8c790bc124ca4dfc * attach the actual board file (board.bin): - The name of the files are equal to the id string in the board-2.bin (minus the ".bin") Regards, Vincent Tremblay [-- Attachment #2: bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=linksys-whw03v2.bin --] [-- Type: application/octet-stream, Size: 12064 bytes --] [-- Attachment #3: bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=linksys-whw03v2.bin --] [-- Type: application/octet-stream, Size: 12064 bytes --] [-- Attachment #4: Type: text/plain, Size: 146 bytes --] _______________________________________________ ath10k mailing list ath10k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath10k ^ permalink raw reply [flat|nested] 4+ messages in thread
[parent not found: <CA+RD57Mv6FJwOKLo0JcJoMEZ3A22bZ8e4Fvhhzpjdn2r-Q1yrw@mail.gmail.com>]
* ath10k-firmware: QCA9888 hw2.0: Add Linksys WHW03V2 specific BDFs [not found] ` <CA+RD57Mv6FJwOKLo0JcJoMEZ3A22bZ8e4Fvhhzpjdn2r-Q1yrw@mail.gmail.com> @ 2022-12-20 19:41 ` Vincent Tremblay 2023-03-17 11:43 ` Kalle Valo 0 siblings, 1 reply; 4+ messages in thread From: Vincent Tremblay @ 2022-12-20 19:41 UTC (permalink / raw) To: ath10k [-- Attachment #1: Type: text/plain, Size: 849 bytes --] Hi, This is a set of files for the Linksys WHW03V2 that are currently missing from the repository. * description for what hardware this is: - it is a IPQ4019 based board - QCA9888 V2 interface connected over PCI-E to operate on higher part of the 5 GHZ spectrum * origin of the board file (did you create it yourself or where you downloaded): They were extracted from the vendor firmware (version 2.1.19.209783). The files can be found in the folder "/lib/firmware/QCA9888/v2/FCC". * ids to be used with the board file (ATH10K_BD_IE_BOARD_NAME in ath10k): bus=pci,bmi-chip-id=0,bmi-board-id=23,variant=linksys-whw03v2.bin md5sum: fde89e0dace1652566d96fb9c83b1c61 * attach the actual board file (board.bin): - The name of the files are equal to the id string in the board-2.bin (minus the ".bin") Regards, Vincent Tremblay [-- Attachment #2: bus=pci,bmi-chip-id=0,bmi-board-id=23,variant=linksys-whw03v2.bin --] [-- Type: application/octet-stream, Size: 12064 bytes --] [-- Attachment #3: Type: text/plain, Size: 146 bytes --] _______________________________________________ ath10k mailing list ath10k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath10k ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: ath10k-firmware: QCA9888 hw2.0: Add Linksys WHW03V2 specific BDFs 2022-12-20 19:41 ` ath10k-firmware: QCA9888 hw2.0: " Vincent Tremblay @ 2023-03-17 11:43 ` Kalle Valo 0 siblings, 0 replies; 4+ messages in thread From: Kalle Valo @ 2023-03-17 11:43 UTC (permalink / raw) To: Vincent Tremblay; +Cc: ath10k Vincent Tremblay <vincent@vtremblay.dev> writes: > This is a set of files for the Linksys WHW03V2 that are currently > missing from the repository. > > * description for what hardware this is: > > - it is a IPQ4019 based board > - QCA9888 V2 interface connected over PCI-E to operate on higher > part of the 5 GHZ spectrum > > * origin of the board file (did you create it yourself or where you > downloaded): > > They were extracted from the vendor firmware (version 2.1.19.209783). > The files can be found in the folder "/lib/firmware/QCA9888/v2/FCC". > > * ids to be used with the board file (ATH10K_BD_IE_BOARD_NAME in ath10k): > > bus=pci,bmi-chip-id=0,bmi-board-id=23,variant=linksys-whw03v2.bin > md5sum: fde89e0dace1652566d96fb9c83b1c61 > > * attach the actual board file (board.bin): > > - The name of the files are equal to the id string in the board-2.bin > (minus the ".bin") It looks like you submitted a new version of this so dropping this one. -- https://patchwork.kernel.org/project/linux-wireless/list/ https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches _______________________________________________ ath10k mailing list ath10k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath10k ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: ath10k-firmware: QCA4019 hw1.0: Add Linksys WHW03V2 specific BDFs 2022-12-20 19:32 ` ath10k-firmware: QCA4019 hw1.0: Add Linksys WHW03V2 specific BDFs Vincent Tremblay [not found] ` <CA+RD57Mv6FJwOKLo0JcJoMEZ3A22bZ8e4Fvhhzpjdn2r-Q1yrw@mail.gmail.com> @ 2023-03-17 11:42 ` Kalle Valo 1 sibling, 0 replies; 4+ messages in thread From: Kalle Valo @ 2023-03-17 11:42 UTC (permalink / raw) To: Vincent Tremblay; +Cc: ath10k Vincent Tremblay <vincent@vtremblay.dev> writes: > This is a set of files for the Linksys WHW03V2 that are currently > missing from the repository. > > * description for what hardware this is: > > - it is a IPQ4019 based board > - one QCA40xx radio is used as 2.4GHz radio > - one QCA40xx radio is used as 5GHz radio > > * origin of the board file (did you create it yourself or where you > downloaded): > > They were extracted from the vendor firmware (version 2.1.19.209783). > The files can be found in the folder "/lib/firmware/IPQ4019/v2/FCC". > > * ids to be used with the board file (ATH10K_BD_IE_BOARD_NAME in ath10k): > > bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=linksys-whw03v2.bin > md5sum: 0435269fbb0797bf269b8cb0591e7544 > > bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=linksys-whw03v2.bin > md5sum: 79042d093e81a43c8c790bc124ca4dfc > > * attach the actual board file (board.bin): > > - The name of the files are equal to the id string in the board-2.bin > (minus the ".bin") It looks like you submitted a new version of these so dropping this one. -- https://patchwork.kernel.org/project/linux-wireless/list/ https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches _______________________________________________ ath10k mailing list ath10k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath10k ^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2023-03-17 11:43 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <CA+RD57PNNMFfkZ5ysh646A1Qde17x3qitqWhnXbRpFkYAYYuoQ@mail.gmail.com>
2022-12-20 19:32 ` ath10k-firmware: QCA4019 hw1.0: Add Linksys WHW03V2 specific BDFs Vincent Tremblay
[not found] ` <CA+RD57Mv6FJwOKLo0JcJoMEZ3A22bZ8e4Fvhhzpjdn2r-Q1yrw@mail.gmail.com>
2022-12-20 19:41 ` ath10k-firmware: QCA9888 hw2.0: " Vincent Tremblay
2023-03-17 11:43 ` Kalle Valo
2023-03-17 11:42 ` ath10k-firmware: QCA4019 hw1.0: " Kalle Valo
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.