All of lore.kernel.org
 help / color / mirror / Atom feed
From: Kalle Valo <kvalo@kernel.org>
To: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org>
Cc: ath11k@lists.infradead.org, linux-wireless@vger.kernel.org,
	Miles Hu <milehu@codeaurora.org>, John Crispin <john@phrozen.org>
Subject: Re: [PATCH v10 1/3] ath11k: switch to using ieee80211_tx_status_ext()
Date: Mon, 21 Feb 2022 12:52:50 +0200	[thread overview]
Message-ID: <87ley4wkxp.fsf@kernel.org> (raw)
In-Reply-To: <20220217012112.31211-2-pradeepc@codeaurora.org> (Pradeep Kumar Chitrapu's message of "Wed, 16 Feb 2022 17:21:10 -0800")

Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> writes:

> This allows us to pass HE rates down into the stack.
>
> Co-developed-by: Miles Hu <milehu@codeaurora.org>
> Signed-off-by: Miles Hu <milehu@codeaurora.org>
> Signed-off-by: John Crispin <john@phrozen.org>
> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org>
> ---
>  drivers/net/wireless/ath/ath11k/dp_tx.c | 32 +++++++++++++++++++++----
>  1 file changed, 27 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/net/wireless/ath/ath11k/dp_tx.c b/drivers/net/wireless/ath/ath11k/dp_tx.c
> index c7d7631efa5a..6f553a870e70 100644
> --- a/drivers/net/wireless/ath/ath11k/dp_tx.c
> +++ b/drivers/net/wireless/ath/ath11k/dp_tx.c
> @@ -519,9 +519,13 @@ static void ath11k_dp_tx_complete_msdu(struct ath11k *ar,
>  				       struct sk_buff *msdu,
>  				       struct hal_tx_status *ts)
>  {
> +	struct ieee80211_tx_status status = { 0 };
>  	struct ath11k_base *ab = ar->ab;
>  	struct ieee80211_tx_info *info;
>  	struct ath11k_skb_cb *skb_cb;
> +	struct ath11k_peer *peer;
> +	struct ath11k_sta *arsta;
> +	struct rate_info rate;
>  
>  	if (WARN_ON_ONCE(ts->buf_rel_source != HAL_WBM_REL_SRC_MODULE_TQM)) {
>  		/* Must not happen */
> @@ -584,12 +588,30 @@ static void ath11k_dp_tx_complete_msdu(struct ath11k *ar,
>  		ath11k_dp_tx_cache_peer_stats(ar, msdu, ts);
>  	}
>  
> -	/* NOTE: Tx rate status reporting. Tx completion status does not have
> -	 * necessary information (for example nss) to build the tx rate.
> -	 * Might end up reporting it out-of-band from HTT stats.
> -	 */
> +	spin_lock_bh(&ab->base_lock);
> +	peer = ath11k_peer_find_by_id(ab, ts->peer_id);
> +	if (!peer || !peer->sta) {
> +		ath11k_dbg(ab, ATH11K_DBG_DATA,
> +			   "dp_tx: failed to find the peer with peer_id %d\n",
> +			    ts->peer_id);
> +		spin_unlock_bh(&ab->base_lock);
> +		dev_kfree_skb_any(msdu);
> +		goto exit;
> +	}
> +	arsta = (struct ath11k_sta *)peer->sta->drv_priv;
> +	status.sta = peer->sta;
> +	status.skb = msdu;
> +	status.info = info;
> +	rate = arsta->last_txrate;
> +	status.rate = &rate;
>  
> -	ieee80211_tx_status(ar->hw, msdu);
> +	spin_unlock_bh(&ab->base_lock);
> +	rcu_read_unlock();
> +
> +	ieee80211_tx_status_ext(ar->hw, &status);
> +	return;
> +exit:
> +	rcu_read_unlock();
>  }

This patch gives a warning:

drivers/net/wireless/ath/ath11k/dp_tx.c:600:9: warning: context imbalance in 'ath11k_dp_tx_complete_msdu' - unexpected unlock

I don't understand why there's rcu_read_unlock() so in the pending
branch I removed both of the calls and also the exit label.

https://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git/commit/?h=pending&id=cb63b88dca170d9de9ff30a546e08917e91c6f05

Please check my changes.

-- 
https://patchwork.kernel.org/project/linux-wireless/list/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches

-- 
ath11k mailing list
ath11k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath11k

WARNING: multiple messages have this Message-ID (diff)
From: Kalle Valo <kvalo@kernel.org>
To: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org>
Cc: ath11k@lists.infradead.org, linux-wireless@vger.kernel.org,
	Miles Hu <milehu@codeaurora.org>, John Crispin <john@phrozen.org>
Subject: Re: [PATCH v10 1/3] ath11k: switch to using ieee80211_tx_status_ext()
Date: Mon, 21 Feb 2022 12:52:50 +0200	[thread overview]
Message-ID: <87ley4wkxp.fsf@kernel.org> (raw)
In-Reply-To: <20220217012112.31211-2-pradeepc@codeaurora.org> (Pradeep Kumar Chitrapu's message of "Wed, 16 Feb 2022 17:21:10 -0800")

Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> writes:

> This allows us to pass HE rates down into the stack.
>
> Co-developed-by: Miles Hu <milehu@codeaurora.org>
> Signed-off-by: Miles Hu <milehu@codeaurora.org>
> Signed-off-by: John Crispin <john@phrozen.org>
> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org>
> ---
>  drivers/net/wireless/ath/ath11k/dp_tx.c | 32 +++++++++++++++++++++----
>  1 file changed, 27 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/net/wireless/ath/ath11k/dp_tx.c b/drivers/net/wireless/ath/ath11k/dp_tx.c
> index c7d7631efa5a..6f553a870e70 100644
> --- a/drivers/net/wireless/ath/ath11k/dp_tx.c
> +++ b/drivers/net/wireless/ath/ath11k/dp_tx.c
> @@ -519,9 +519,13 @@ static void ath11k_dp_tx_complete_msdu(struct ath11k *ar,
>  				       struct sk_buff *msdu,
>  				       struct hal_tx_status *ts)
>  {
> +	struct ieee80211_tx_status status = { 0 };
>  	struct ath11k_base *ab = ar->ab;
>  	struct ieee80211_tx_info *info;
>  	struct ath11k_skb_cb *skb_cb;
> +	struct ath11k_peer *peer;
> +	struct ath11k_sta *arsta;
> +	struct rate_info rate;
>  
>  	if (WARN_ON_ONCE(ts->buf_rel_source != HAL_WBM_REL_SRC_MODULE_TQM)) {
>  		/* Must not happen */
> @@ -584,12 +588,30 @@ static void ath11k_dp_tx_complete_msdu(struct ath11k *ar,
>  		ath11k_dp_tx_cache_peer_stats(ar, msdu, ts);
>  	}
>  
> -	/* NOTE: Tx rate status reporting. Tx completion status does not have
> -	 * necessary information (for example nss) to build the tx rate.
> -	 * Might end up reporting it out-of-band from HTT stats.
> -	 */
> +	spin_lock_bh(&ab->base_lock);
> +	peer = ath11k_peer_find_by_id(ab, ts->peer_id);
> +	if (!peer || !peer->sta) {
> +		ath11k_dbg(ab, ATH11K_DBG_DATA,
> +			   "dp_tx: failed to find the peer with peer_id %d\n",
> +			    ts->peer_id);
> +		spin_unlock_bh(&ab->base_lock);
> +		dev_kfree_skb_any(msdu);
> +		goto exit;
> +	}
> +	arsta = (struct ath11k_sta *)peer->sta->drv_priv;
> +	status.sta = peer->sta;
> +	status.skb = msdu;
> +	status.info = info;
> +	rate = arsta->last_txrate;
> +	status.rate = &rate;
>  
> -	ieee80211_tx_status(ar->hw, msdu);
> +	spin_unlock_bh(&ab->base_lock);
> +	rcu_read_unlock();
> +
> +	ieee80211_tx_status_ext(ar->hw, &status);
> +	return;
> +exit:
> +	rcu_read_unlock();
>  }

This patch gives a warning:

drivers/net/wireless/ath/ath11k/dp_tx.c:600:9: warning: context imbalance in 'ath11k_dp_tx_complete_msdu' - unexpected unlock

I don't understand why there's rcu_read_unlock() so in the pending
branch I removed both of the calls and also the exit label.

https://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git/commit/?h=pending&id=cb63b88dca170d9de9ff30a546e08917e91c6f05

Please check my changes.

-- 
https://patchwork.kernel.org/project/linux-wireless/list/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches

  reply	other threads:[~2022-02-21 10:57 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-02-17  1:21 [PATCH v10 0/3] ath11k: add HE radiotap header support Pradeep Kumar Chitrapu
2022-02-17  1:21 ` Pradeep Kumar Chitrapu
2022-02-17  1:21 ` [PATCH v10 1/3] ath11k: switch to using ieee80211_tx_status_ext() Pradeep Kumar Chitrapu
2022-02-17  1:21   ` Pradeep Kumar Chitrapu
2022-02-21 10:52   ` Kalle Valo [this message]
2022-02-21 10:52     ` Kalle Valo
2022-02-24  9:01   ` Kalle Valo
2022-02-24  9:01     ` Kalle Valo
2022-02-17  1:21 ` [PATCH v10 2/3] ath11k: decode HE status tlv Pradeep Kumar Chitrapu
2022-02-17  1:21   ` Pradeep Kumar Chitrapu
2022-02-21 10:48   ` Kalle Valo
2022-02-21 10:48     ` Kalle Valo
2022-02-17  1:21 ` [PATCH v10 3/3] ath11k: translate HE status to radiotap format Pradeep Kumar Chitrapu
2022-02-17  1:21   ` Pradeep Kumar Chitrapu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=87ley4wkxp.fsf@kernel.org \
    --to=kvalo@kernel.org \
    --cc=ath11k@lists.infradead.org \
    --cc=john@phrozen.org \
    --cc=linux-wireless@vger.kernel.org \
    --cc=milehu@codeaurora.org \
    --cc=pradeepc@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.