From: Jani Nikula <jani.nikula@linux.intel.com>
To: intel-gfx@lists.freedesktop.org, dri-devel@lists.freedesktop.org
Cc: arthur.j.runyan@intel.com,
open list <linux-kernel@vger.kernel.org>,
Daniel Vetter <daniel.vetter@intel.com>, Lyude <cpaul@redhat.com>
Subject: Re: [PATCH v4 RESEND 5/5] drm/i915: Get rid of intel_dp_dpcd_read_wake()
Date: Wed, 30 Mar 2016 17:26:47 +0300 [thread overview]
Message-ID: <87lh5011p4.fsf@intel.com> (raw)
In-Reply-To: <1459175606-13875-6-git-send-email-cpaul@redhat.com>
On Mon, 28 Mar 2016, Lyude <cpaul@redhat.com> wrote:
> Since we've fixed up drm_dp_dpcd_read() to allow for retries when things
> timeout, there's no use for having this function anymore. Good riddens.
>
> Signed-off-by: Lyude <cpaul@redhat.com>
> ---
> drivers/gpu/drm/i915/intel_dp.c | 79 ++++++++++++-----------------------------
> 1 file changed, 22 insertions(+), 57 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
> index f069a82..43c2933 100644
> --- a/drivers/gpu/drm/i915/intel_dp.c
> +++ b/drivers/gpu/drm/i915/intel_dp.c
> @@ -3184,47 +3184,14 @@ static void chv_dp_post_pll_disable(struct intel_encoder *encoder)
> }
>
> /*
> - * Native read with retry for link status and receiver capability reads for
> - * cases where the sink may still be asleep.
> - *
> - * Sinks are *supposed* to come up within 1ms from an off state, but we're also
> - * supposed to retry 3 times per the spec.
> - */
> -static ssize_t
> -intel_dp_dpcd_read_wake(struct drm_dp_aux *aux, unsigned int offset,
> - void *buffer, size_t size)
> -{
> - ssize_t ret;
> - int i;
> -
> - /*
> - * Sometime we just get the same incorrect byte repeated
> - * over the entire buffer. Doing just one throw away read
> - * initially seems to "solve" it.
> - */
> - drm_dp_dpcd_read(aux, DP_DPCD_REV, buffer, 1);
Ville, care to check this series (except patch 1) with your display to
see if it still works?
BR,
Jani.
> -
> - for (i = 0; i < 3; i++) {
> - ret = drm_dp_dpcd_read(aux, offset, buffer, size);
> - if (ret == size)
> - return ret;
> - msleep(1);
> - }
> -
> - return ret;
> -}
> -
> -/*
> * Fetch AUX CH registers 0x202 - 0x207 which contain
> * link status information
> */
> bool
> intel_dp_get_link_status(struct intel_dp *intel_dp, uint8_t link_status[DP_LINK_STATUS_SIZE])
> {
> - return intel_dp_dpcd_read_wake(&intel_dp->aux,
> - DP_LANE0_1_STATUS,
> - link_status,
> - DP_LINK_STATUS_SIZE) == DP_LINK_STATUS_SIZE;
> + return drm_dp_dpcd_read(&intel_dp->aux, DP_LANE0_1_STATUS, link_status,
> + DP_LINK_STATUS_SIZE) == DP_LINK_STATUS_SIZE;
> }
>
> /* These are source-specific values. */
> @@ -3859,8 +3826,8 @@ intel_dp_get_dpcd(struct intel_dp *intel_dp)
> struct drm_i915_private *dev_priv = dev->dev_private;
> uint8_t rev;
>
> - if (intel_dp_dpcd_read_wake(&intel_dp->aux, 0x000, intel_dp->dpcd,
> - sizeof(intel_dp->dpcd)) < 0)
> + if (drm_dp_dpcd_read(&intel_dp->aux, 0x000, intel_dp->dpcd,
> + sizeof(intel_dp->dpcd)) < 0)
> return false; /* aux transfer failed */
>
> DRM_DEBUG_KMS("DPCD: %*ph\n", (int) sizeof(intel_dp->dpcd), intel_dp->dpcd);
> @@ -3871,9 +3838,9 @@ intel_dp_get_dpcd(struct intel_dp *intel_dp)
> /* Check if the panel supports PSR */
> memset(intel_dp->psr_dpcd, 0, sizeof(intel_dp->psr_dpcd));
> if (is_edp(intel_dp)) {
> - intel_dp_dpcd_read_wake(&intel_dp->aux, DP_PSR_SUPPORT,
> - intel_dp->psr_dpcd,
> - sizeof(intel_dp->psr_dpcd));
> + drm_dp_dpcd_read(&intel_dp->aux, DP_PSR_SUPPORT,
> + intel_dp->psr_dpcd,
> + sizeof(intel_dp->psr_dpcd));
> if (intel_dp->psr_dpcd[0] & DP_PSR_IS_SUPPORTED) {
> dev_priv->psr.sink_support = true;
> DRM_DEBUG_KMS("Detected EDP PSR Panel.\n");
> @@ -3884,9 +3851,9 @@ intel_dp_get_dpcd(struct intel_dp *intel_dp)
> uint8_t frame_sync_cap;
>
> dev_priv->psr.sink_support = true;
> - intel_dp_dpcd_read_wake(&intel_dp->aux,
> - DP_SINK_DEVICE_AUX_FRAME_SYNC_CAP,
> - &frame_sync_cap, 1);
> + drm_dp_dpcd_read(&intel_dp->aux,
> + DP_SINK_DEVICE_AUX_FRAME_SYNC_CAP,
> + &frame_sync_cap, 1);
> dev_priv->psr.aux_frame_sync = frame_sync_cap ? true : false;
> /* PSR2 needs frame sync as well */
> dev_priv->psr.psr2_support = dev_priv->psr.aux_frame_sync;
> @@ -3902,15 +3869,13 @@ intel_dp_get_dpcd(struct intel_dp *intel_dp)
> /* Intermediate frequency support */
> if (is_edp(intel_dp) &&
> (intel_dp->dpcd[DP_EDP_CONFIGURATION_CAP] & DP_DPCD_DISPLAY_CONTROL_CAPABLE) &&
> - (intel_dp_dpcd_read_wake(&intel_dp->aux, DP_EDP_DPCD_REV, &rev, 1) == 1) &&
> + (drm_dp_dpcd_read(&intel_dp->aux, DP_EDP_DPCD_REV, &rev, 1) == 1) &&
> (rev >= 0x03)) { /* eDp v1.4 or higher */
> __le16 sink_rates[DP_MAX_SUPPORTED_RATES];
> int i;
>
> - intel_dp_dpcd_read_wake(&intel_dp->aux,
> - DP_SUPPORTED_LINK_RATES,
> - sink_rates,
> - sizeof(sink_rates));
> + drm_dp_dpcd_read(&intel_dp->aux, DP_SUPPORTED_LINK_RATES,
> + sink_rates, sizeof(sink_rates));
>
> for (i = 0; i < ARRAY_SIZE(sink_rates); i++) {
> int val = le16_to_cpu(sink_rates[i]);
> @@ -3933,9 +3898,9 @@ intel_dp_get_dpcd(struct intel_dp *intel_dp)
> if (intel_dp->dpcd[DP_DPCD_REV] == 0x10)
> return true; /* no per-port downstream info */
>
> - if (intel_dp_dpcd_read_wake(&intel_dp->aux, DP_DOWNSTREAM_PORT_0,
> - intel_dp->downstream_ports,
> - DP_MAX_DOWNSTREAM_PORTS) < 0)
> + if (drm_dp_dpcd_read(&intel_dp->aux, DP_DOWNSTREAM_PORT_0,
> + intel_dp->downstream_ports,
> + DP_MAX_DOWNSTREAM_PORTS) < 0)
> return false; /* downstream port status fetch failed */
>
> return true;
> @@ -3949,11 +3914,11 @@ intel_dp_probe_oui(struct intel_dp *intel_dp)
> if (!(intel_dp->dpcd[DP_DOWN_STREAM_PORT_COUNT] & DP_OUI_SUPPORT))
> return;
>
> - if (intel_dp_dpcd_read_wake(&intel_dp->aux, DP_SINK_OUI, buf, 3) == 3)
> + if (drm_dp_dpcd_read(&intel_dp->aux, DP_SINK_OUI, buf, 3) == 3)
> DRM_DEBUG_KMS("Sink OUI: %02hx%02hx%02hx\n",
> buf[0], buf[1], buf[2]);
>
> - if (intel_dp_dpcd_read_wake(&intel_dp->aux, DP_BRANCH_OUI, buf, 3) == 3)
> + if (drm_dp_dpcd_read(&intel_dp->aux, DP_BRANCH_OUI, buf, 3) == 3)
> DRM_DEBUG_KMS("Branch OUI: %02hx%02hx%02hx\n",
> buf[0], buf[1], buf[2]);
> }
> @@ -3969,7 +3934,7 @@ intel_dp_probe_mst(struct intel_dp *intel_dp)
> if (intel_dp->dpcd[DP_DPCD_REV] < 0x12)
> return false;
>
> - if (intel_dp_dpcd_read_wake(&intel_dp->aux, DP_MSTM_CAP, buf, 1)) {
> + if (drm_dp_dpcd_read(&intel_dp->aux, DP_MSTM_CAP, buf, 1)) {
> if (buf[0] & DP_MST_CAP) {
> DRM_DEBUG_KMS("Sink is MST capable\n");
> intel_dp->is_mst = true;
> @@ -4106,7 +4071,7 @@ stop:
> static bool
> intel_dp_get_sink_irq(struct intel_dp *intel_dp, u8 *sink_irq_vector)
> {
> - return intel_dp_dpcd_read_wake(&intel_dp->aux,
> + return drm_dp_dpcd_read(&intel_dp->aux,
> DP_DEVICE_SERVICE_IRQ_VECTOR,
> sink_irq_vector, 1) == 1;
> }
> @@ -4116,7 +4081,7 @@ intel_dp_get_sink_irq_esi(struct intel_dp *intel_dp, u8 *sink_irq_vector)
> {
> int ret;
>
> - ret = intel_dp_dpcd_read_wake(&intel_dp->aux,
> + ret = drm_dp_dpcd_read(&intel_dp->aux,
> DP_SINK_COUNT_ESI,
> sink_irq_vector, 14);
> if (ret != 14)
> @@ -4377,7 +4342,7 @@ intel_dp_detect_dpcd(struct intel_dp *intel_dp)
> intel_dp->downstream_ports[0] & DP_DS_PORT_HPD) {
> uint8_t reg;
>
> - if (intel_dp_dpcd_read_wake(&intel_dp->aux, DP_SINK_COUNT,
> + if (drm_dp_dpcd_read(&intel_dp->aux, DP_SINK_COUNT,
> ®, 1) < 0)
> return connector_status_unknown;
--
Jani Nikula, Intel Open Source Technology Center
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
WARNING: multiple messages have this Message-ID (diff)
From: Jani Nikula <jani.nikula@linux.intel.com>
To: Lyude <cpaul@redhat.com>,
intel-gfx@lists.freedesktop.org, dri-devel@lists.freedesktop.org
Cc: arthur.j.runyan@intel.com,
"Ville Syrjälä" <ville.syrjala@linux.intel.com>,
Lyude <cpaul@redhat.com>,
"Daniel Vetter" <daniel.vetter@intel.com>,
"David Airlie" <airlied@linux.ie>,
"open list" <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v4 RESEND 5/5] drm/i915: Get rid of intel_dp_dpcd_read_wake()
Date: Wed, 30 Mar 2016 17:26:47 +0300 [thread overview]
Message-ID: <87lh5011p4.fsf@intel.com> (raw)
In-Reply-To: <1459175606-13875-6-git-send-email-cpaul@redhat.com>
On Mon, 28 Mar 2016, Lyude <cpaul@redhat.com> wrote:
> Since we've fixed up drm_dp_dpcd_read() to allow for retries when things
> timeout, there's no use for having this function anymore. Good riddens.
>
> Signed-off-by: Lyude <cpaul@redhat.com>
> ---
> drivers/gpu/drm/i915/intel_dp.c | 79 ++++++++++++-----------------------------
> 1 file changed, 22 insertions(+), 57 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
> index f069a82..43c2933 100644
> --- a/drivers/gpu/drm/i915/intel_dp.c
> +++ b/drivers/gpu/drm/i915/intel_dp.c
> @@ -3184,47 +3184,14 @@ static void chv_dp_post_pll_disable(struct intel_encoder *encoder)
> }
>
> /*
> - * Native read with retry for link status and receiver capability reads for
> - * cases where the sink may still be asleep.
> - *
> - * Sinks are *supposed* to come up within 1ms from an off state, but we're also
> - * supposed to retry 3 times per the spec.
> - */
> -static ssize_t
> -intel_dp_dpcd_read_wake(struct drm_dp_aux *aux, unsigned int offset,
> - void *buffer, size_t size)
> -{
> - ssize_t ret;
> - int i;
> -
> - /*
> - * Sometime we just get the same incorrect byte repeated
> - * over the entire buffer. Doing just one throw away read
> - * initially seems to "solve" it.
> - */
> - drm_dp_dpcd_read(aux, DP_DPCD_REV, buffer, 1);
Ville, care to check this series (except patch 1) with your display to
see if it still works?
BR,
Jani.
> -
> - for (i = 0; i < 3; i++) {
> - ret = drm_dp_dpcd_read(aux, offset, buffer, size);
> - if (ret == size)
> - return ret;
> - msleep(1);
> - }
> -
> - return ret;
> -}
> -
> -/*
> * Fetch AUX CH registers 0x202 - 0x207 which contain
> * link status information
> */
> bool
> intel_dp_get_link_status(struct intel_dp *intel_dp, uint8_t link_status[DP_LINK_STATUS_SIZE])
> {
> - return intel_dp_dpcd_read_wake(&intel_dp->aux,
> - DP_LANE0_1_STATUS,
> - link_status,
> - DP_LINK_STATUS_SIZE) == DP_LINK_STATUS_SIZE;
> + return drm_dp_dpcd_read(&intel_dp->aux, DP_LANE0_1_STATUS, link_status,
> + DP_LINK_STATUS_SIZE) == DP_LINK_STATUS_SIZE;
> }
>
> /* These are source-specific values. */
> @@ -3859,8 +3826,8 @@ intel_dp_get_dpcd(struct intel_dp *intel_dp)
> struct drm_i915_private *dev_priv = dev->dev_private;
> uint8_t rev;
>
> - if (intel_dp_dpcd_read_wake(&intel_dp->aux, 0x000, intel_dp->dpcd,
> - sizeof(intel_dp->dpcd)) < 0)
> + if (drm_dp_dpcd_read(&intel_dp->aux, 0x000, intel_dp->dpcd,
> + sizeof(intel_dp->dpcd)) < 0)
> return false; /* aux transfer failed */
>
> DRM_DEBUG_KMS("DPCD: %*ph\n", (int) sizeof(intel_dp->dpcd), intel_dp->dpcd);
> @@ -3871,9 +3838,9 @@ intel_dp_get_dpcd(struct intel_dp *intel_dp)
> /* Check if the panel supports PSR */
> memset(intel_dp->psr_dpcd, 0, sizeof(intel_dp->psr_dpcd));
> if (is_edp(intel_dp)) {
> - intel_dp_dpcd_read_wake(&intel_dp->aux, DP_PSR_SUPPORT,
> - intel_dp->psr_dpcd,
> - sizeof(intel_dp->psr_dpcd));
> + drm_dp_dpcd_read(&intel_dp->aux, DP_PSR_SUPPORT,
> + intel_dp->psr_dpcd,
> + sizeof(intel_dp->psr_dpcd));
> if (intel_dp->psr_dpcd[0] & DP_PSR_IS_SUPPORTED) {
> dev_priv->psr.sink_support = true;
> DRM_DEBUG_KMS("Detected EDP PSR Panel.\n");
> @@ -3884,9 +3851,9 @@ intel_dp_get_dpcd(struct intel_dp *intel_dp)
> uint8_t frame_sync_cap;
>
> dev_priv->psr.sink_support = true;
> - intel_dp_dpcd_read_wake(&intel_dp->aux,
> - DP_SINK_DEVICE_AUX_FRAME_SYNC_CAP,
> - &frame_sync_cap, 1);
> + drm_dp_dpcd_read(&intel_dp->aux,
> + DP_SINK_DEVICE_AUX_FRAME_SYNC_CAP,
> + &frame_sync_cap, 1);
> dev_priv->psr.aux_frame_sync = frame_sync_cap ? true : false;
> /* PSR2 needs frame sync as well */
> dev_priv->psr.psr2_support = dev_priv->psr.aux_frame_sync;
> @@ -3902,15 +3869,13 @@ intel_dp_get_dpcd(struct intel_dp *intel_dp)
> /* Intermediate frequency support */
> if (is_edp(intel_dp) &&
> (intel_dp->dpcd[DP_EDP_CONFIGURATION_CAP] & DP_DPCD_DISPLAY_CONTROL_CAPABLE) &&
> - (intel_dp_dpcd_read_wake(&intel_dp->aux, DP_EDP_DPCD_REV, &rev, 1) == 1) &&
> + (drm_dp_dpcd_read(&intel_dp->aux, DP_EDP_DPCD_REV, &rev, 1) == 1) &&
> (rev >= 0x03)) { /* eDp v1.4 or higher */
> __le16 sink_rates[DP_MAX_SUPPORTED_RATES];
> int i;
>
> - intel_dp_dpcd_read_wake(&intel_dp->aux,
> - DP_SUPPORTED_LINK_RATES,
> - sink_rates,
> - sizeof(sink_rates));
> + drm_dp_dpcd_read(&intel_dp->aux, DP_SUPPORTED_LINK_RATES,
> + sink_rates, sizeof(sink_rates));
>
> for (i = 0; i < ARRAY_SIZE(sink_rates); i++) {
> int val = le16_to_cpu(sink_rates[i]);
> @@ -3933,9 +3898,9 @@ intel_dp_get_dpcd(struct intel_dp *intel_dp)
> if (intel_dp->dpcd[DP_DPCD_REV] == 0x10)
> return true; /* no per-port downstream info */
>
> - if (intel_dp_dpcd_read_wake(&intel_dp->aux, DP_DOWNSTREAM_PORT_0,
> - intel_dp->downstream_ports,
> - DP_MAX_DOWNSTREAM_PORTS) < 0)
> + if (drm_dp_dpcd_read(&intel_dp->aux, DP_DOWNSTREAM_PORT_0,
> + intel_dp->downstream_ports,
> + DP_MAX_DOWNSTREAM_PORTS) < 0)
> return false; /* downstream port status fetch failed */
>
> return true;
> @@ -3949,11 +3914,11 @@ intel_dp_probe_oui(struct intel_dp *intel_dp)
> if (!(intel_dp->dpcd[DP_DOWN_STREAM_PORT_COUNT] & DP_OUI_SUPPORT))
> return;
>
> - if (intel_dp_dpcd_read_wake(&intel_dp->aux, DP_SINK_OUI, buf, 3) == 3)
> + if (drm_dp_dpcd_read(&intel_dp->aux, DP_SINK_OUI, buf, 3) == 3)
> DRM_DEBUG_KMS("Sink OUI: %02hx%02hx%02hx\n",
> buf[0], buf[1], buf[2]);
>
> - if (intel_dp_dpcd_read_wake(&intel_dp->aux, DP_BRANCH_OUI, buf, 3) == 3)
> + if (drm_dp_dpcd_read(&intel_dp->aux, DP_BRANCH_OUI, buf, 3) == 3)
> DRM_DEBUG_KMS("Branch OUI: %02hx%02hx%02hx\n",
> buf[0], buf[1], buf[2]);
> }
> @@ -3969,7 +3934,7 @@ intel_dp_probe_mst(struct intel_dp *intel_dp)
> if (intel_dp->dpcd[DP_DPCD_REV] < 0x12)
> return false;
>
> - if (intel_dp_dpcd_read_wake(&intel_dp->aux, DP_MSTM_CAP, buf, 1)) {
> + if (drm_dp_dpcd_read(&intel_dp->aux, DP_MSTM_CAP, buf, 1)) {
> if (buf[0] & DP_MST_CAP) {
> DRM_DEBUG_KMS("Sink is MST capable\n");
> intel_dp->is_mst = true;
> @@ -4106,7 +4071,7 @@ stop:
> static bool
> intel_dp_get_sink_irq(struct intel_dp *intel_dp, u8 *sink_irq_vector)
> {
> - return intel_dp_dpcd_read_wake(&intel_dp->aux,
> + return drm_dp_dpcd_read(&intel_dp->aux,
> DP_DEVICE_SERVICE_IRQ_VECTOR,
> sink_irq_vector, 1) == 1;
> }
> @@ -4116,7 +4081,7 @@ intel_dp_get_sink_irq_esi(struct intel_dp *intel_dp, u8 *sink_irq_vector)
> {
> int ret;
>
> - ret = intel_dp_dpcd_read_wake(&intel_dp->aux,
> + ret = drm_dp_dpcd_read(&intel_dp->aux,
> DP_SINK_COUNT_ESI,
> sink_irq_vector, 14);
> if (ret != 14)
> @@ -4377,7 +4342,7 @@ intel_dp_detect_dpcd(struct intel_dp *intel_dp)
> intel_dp->downstream_ports[0] & DP_DS_PORT_HPD) {
> uint8_t reg;
>
> - if (intel_dp_dpcd_read_wake(&intel_dp->aux, DP_SINK_COUNT,
> + if (drm_dp_dpcd_read(&intel_dp->aux, DP_SINK_COUNT,
> ®, 1) < 0)
> return connector_status_unknown;
--
Jani Nikula, Intel Open Source Technology Center
next prev parent reply other threads:[~2016-03-30 14:26 UTC|newest]
Thread overview: 43+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-03-28 14:33 [PATCH v4 RESEND 0/5] Move workarounds from intel_dp_dpcd_read_wake() into drm's DP helpers Lyude
2016-03-28 14:33 ` Lyude
2016-03-28 14:31 ` ✗ Fi.CI.BAT: failure for " Patchwork
2016-03-28 14:33 ` [PATCH v4 RESEND 1/5] drm/dp_helper: Increase retry interval to 1000us Lyude
2016-03-28 14:33 ` Lyude
2016-03-29 8:27 ` Daniel Vetter
2016-03-29 8:27 ` Daniel Vetter
2016-03-29 14:05 ` Lyude Paul
2016-03-28 14:33 ` [PATCH v4 RESEND 2/5] drm/dp_helper: Always wait before retrying native aux transactions Lyude
2016-03-28 14:33 ` Lyude
2016-03-28 14:33 ` [PATCH v4 RESEND 3/5] drm/dp_helper: Retry aux transactions on all errors Lyude
2016-03-28 14:33 ` Lyude
2016-03-28 14:33 ` [PATCH v4 RESEND 4/5] drm/dp_helper: Perform throw-away read before actual read in drm_dp_dpcd_read() Lyude
2016-03-28 14:33 ` Lyude
2016-03-29 20:43 ` [PATCH v5 " Lyude
2016-03-29 20:43 ` Lyude
2016-03-28 14:33 ` [PATCH v4 RESEND 5/5] drm/i915: Get rid of intel_dp_dpcd_read_wake() Lyude
2016-03-28 14:33 ` Lyude
2016-03-30 14:26 ` Jani Nikula [this message]
2016-03-30 14:26 ` Jani Nikula
2016-04-12 10:17 ` [PATCH v4 RESEND 0/5] Move workarounds from intel_dp_dpcd_read_wake() into drm's DP helpers Jani Nikula
2016-04-12 10:17 ` Jani Nikula
2016-04-12 15:59 ` Lyude
2016-04-12 15:59 ` Lyude
2016-04-13 14:58 ` [PATCH v5 0/4] " Lyude
2016-04-13 14:58 ` Lyude
2016-04-13 14:58 ` [PATCH v5 1/4] drm/dp_helper: Always wait before retrying native aux transactions Lyude
2016-04-13 14:58 ` Lyude
2016-04-13 14:58 ` [PATCH v5 2/4] drm/dp_helper: Retry aux transactions on all errors Lyude
2016-04-13 14:58 ` Lyude
2016-04-13 14:58 ` [PATCH v5 3/4] drm/dp_helper: Perform throw-away read before actual read in drm_dp_dpcd_read() Lyude
2016-04-13 14:58 ` Lyude
2016-04-14 17:01 ` Ville Syrjälä
2016-04-14 17:01 ` Ville Syrjälä
2016-04-15 14:25 ` [PATCH v6 " Lyude
2016-04-15 14:25 ` Lyude
2016-04-15 14:31 ` Ville Syrjälä
2016-04-15 14:31 ` Ville Syrjälä
2016-04-13 14:58 ` [PATCH v5 4/4] drm/i915: Get rid of intel_dp_dpcd_read_wake() Lyude
2016-04-13 14:58 ` Lyude
2016-04-22 16:54 ` Daniel Vetter
2016-04-22 16:54 ` Daniel Vetter
2016-04-14 10:58 ` ✗ Fi.CI.BAT: failure for series starting with [v5,1/4] drm/dp_helper: Always wait before retrying native aux transactions Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87lh5011p4.fsf@intel.com \
--to=jani.nikula@linux.intel.com \
--cc=arthur.j.runyan@intel.com \
--cc=cpaul@redhat.com \
--cc=daniel.vetter@intel.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=intel-gfx@lists.freedesktop.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.