From: Gregory CLEMENT <gregory.clement@bootlin.com>
To: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>,
Andrew Lunn <andrew@lunn.ch>,
Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Subject: Re: [PATCH 2/2] ARM: dts: marvell: dove: drop incorrect reg in fixed regulators
Date: Sat, 12 Aug 2023 17:06:08 +0200 [thread overview]
Message-ID: <87msywti5b.fsf@BL-laptop> (raw)
In-Reply-To: <20230726070254.103661-2-krzysztof.kozlowski@linaro.org>
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> writes:
> Fixed regulators are not in some bus and bindings do not allow a "reg"
> property. Move them out of "regulators" node to top-level.
>
> dove-cubox.dtb: regulator@1: Unevaluated properties are not allowed ('reg' was unexpected)
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Applied on mvebu/dt
Thanks,
Gregory
> ---
> arch/arm/boot/dts/marvell/dove-cm-a510.dtsi | 18 +++++--------
> arch/arm/boot/dts/marvell/dove-cubox.dts | 29 ++++++++-------------
> arch/arm/boot/dts/marvell/dove-d3plug.dts | 29 ++++++++-------------
> arch/arm/boot/dts/marvell/dove-sbc-a510.dts | 28 +++++++++-----------
> 4 files changed, 41 insertions(+), 63 deletions(-)
>
> diff --git a/arch/arm/boot/dts/marvell/dove-cm-a510.dtsi b/arch/arm/boot/dts/marvell/dove-cm-a510.dtsi
> index 1082fdfbfe60..621cb145a8f6 100644
> --- a/arch/arm/boot/dts/marvell/dove-cm-a510.dtsi
> +++ b/arch/arm/boot/dts/marvell/dove-cm-a510.dtsi
> @@ -108,18 +108,12 @@ led-system {
> };
> };
>
> - regulators {
> - compatible = "simple-bus";
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> - wifi_power: regulator@1 {
> - compatible = "regulator-fixed";
> - regulator-name = "WiFi Power";
> - regulator-min-microvolt = <3300000>;
> - regulator-max-microvolt = <3300000>;
> - gpio = <&gpio2 7 GPIO_ACTIVE_HIGH>;
> - };
> + wifi_power: regulator-1 {
> + compatible = "regulator-fixed";
> + regulator-name = "WiFi Power";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + gpio = <&gpio2 7 GPIO_ACTIVE_HIGH>;
> };
> };
>
> diff --git a/arch/arm/boot/dts/marvell/dove-cubox.dts b/arch/arm/boot/dts/marvell/dove-cubox.dts
> index dbba0c8cdab1..bfde99486a87 100644
> --- a/arch/arm/boot/dts/marvell/dove-cubox.dts
> +++ b/arch/arm/boot/dts/marvell/dove-cubox.dts
> @@ -28,24 +28,17 @@ led-power {
> };
> };
>
> - regulators {
> - compatible = "simple-bus";
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> - usb_power: regulator@1 {
> - compatible = "regulator-fixed";
> - reg = <1>;
> - regulator-name = "USB Power";
> - regulator-min-microvolt = <5000000>;
> - regulator-max-microvolt = <5000000>;
> - enable-active-high;
> - regulator-always-on;
> - regulator-boot-on;
> - gpio = <&gpio0 1 0>;
> - pinctrl-0 = <&pmx_gpio_1>;
> - pinctrl-names = "default";
> - };
> + usb_power: regulator-1 {
> + compatible = "regulator-fixed";
> + regulator-name = "USB Power";
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + enable-active-high;
> + regulator-always-on;
> + regulator-boot-on;
> + gpio = <&gpio0 1 0>;
> + pinctrl-0 = <&pmx_gpio_1>;
> + pinctrl-names = "default";
> };
>
> clocks {
> diff --git a/arch/arm/boot/dts/marvell/dove-d3plug.dts b/arch/arm/boot/dts/marvell/dove-d3plug.dts
> index 5aa5d4a7d51d..a451fd576990 100644
> --- a/arch/arm/boot/dts/marvell/dove-d3plug.dts
> +++ b/arch/arm/boot/dts/marvell/dove-d3plug.dts
> @@ -37,24 +37,17 @@ led-status {
> };
> };
>
> - regulators {
> - compatible = "simple-bus";
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> - usb_power: regulator@1 {
> - compatible = "regulator-fixed";
> - reg = <1>;
> - regulator-name = "USB Power";
> - regulator-min-microvolt = <5000000>;
> - regulator-max-microvolt = <5000000>;
> - enable-active-high;
> - regulator-always-on;
> - regulator-boot-on;
> - gpio = <&gpio0 8 0>;
> - pinctrl-0 = <&pmx_gpio_8>;
> - pinctrl-names = "default";
> - };
> + usb_power: regulator-1 {
> + compatible = "regulator-fixed";
> + regulator-name = "USB Power";
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + enable-active-high;
> + regulator-always-on;
> + regulator-boot-on;
> + gpio = <&gpio0 8 0>;
> + pinctrl-0 = <&pmx_gpio_8>;
> + pinctrl-names = "default";
> };
> };
>
> diff --git a/arch/arm/boot/dts/marvell/dove-sbc-a510.dts b/arch/arm/boot/dts/marvell/dove-sbc-a510.dts
> index df021f9b0117..8585ee5533bf 100644
> --- a/arch/arm/boot/dts/marvell/dove-sbc-a510.dts
> +++ b/arch/arm/boot/dts/marvell/dove-sbc-a510.dts
> @@ -76,22 +76,20 @@ chosen {
> stdout-path = &uart0;
> };
>
> - regulators {
> - usb0_power: regulator@2 {
> - compatible = "regulator-fixed";
> - regulator-name = "USB Power";
> - regulator-min-microvolt = <5000000>;
> - regulator-max-microvolt = <5000000>;
> - gpio = <&gpio_ext 0 GPIO_ACTIVE_HIGH>;
> - };
> + usb0_power: regulator-2 {
> + compatible = "regulator-fixed";
> + regulator-name = "USB Power";
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + gpio = <&gpio_ext 0 GPIO_ACTIVE_HIGH>;
> + };
>
> - mmc_power: regulator@3 {
> - compatible = "regulator-fixed";
> - regulator-name = "MMC Power";
> - regulator-min-microvolt = <3300000>;
> - regulator-max-microvolt = <3300000>;
> - gpio = <&gpio_ext 13 GPIO_ACTIVE_HIGH>;
> - };
> + mmc_power: regulator-3 {
> + compatible = "regulator-fixed";
> + regulator-name = "MMC Power";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + gpio = <&gpio_ext 13 GPIO_ACTIVE_HIGH>;
> };
> };
>
> --
> 2.34.1
>
--
Gregory Clement, Bootlin
Embedded Linux and Kernel engineering
http://bootlin.com
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: Gregory CLEMENT <gregory.clement@bootlin.com>
To: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>,
Andrew Lunn <andrew@lunn.ch>,
Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Subject: Re: [PATCH 2/2] ARM: dts: marvell: dove: drop incorrect reg in fixed regulators
Date: Sat, 12 Aug 2023 17:06:08 +0200 [thread overview]
Message-ID: <87msywti5b.fsf@BL-laptop> (raw)
In-Reply-To: <20230726070254.103661-2-krzysztof.kozlowski@linaro.org>
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> writes:
> Fixed regulators are not in some bus and bindings do not allow a "reg"
> property. Move them out of "regulators" node to top-level.
>
> dove-cubox.dtb: regulator@1: Unevaluated properties are not allowed ('reg' was unexpected)
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Applied on mvebu/dt
Thanks,
Gregory
> ---
> arch/arm/boot/dts/marvell/dove-cm-a510.dtsi | 18 +++++--------
> arch/arm/boot/dts/marvell/dove-cubox.dts | 29 ++++++++-------------
> arch/arm/boot/dts/marvell/dove-d3plug.dts | 29 ++++++++-------------
> arch/arm/boot/dts/marvell/dove-sbc-a510.dts | 28 +++++++++-----------
> 4 files changed, 41 insertions(+), 63 deletions(-)
>
> diff --git a/arch/arm/boot/dts/marvell/dove-cm-a510.dtsi b/arch/arm/boot/dts/marvell/dove-cm-a510.dtsi
> index 1082fdfbfe60..621cb145a8f6 100644
> --- a/arch/arm/boot/dts/marvell/dove-cm-a510.dtsi
> +++ b/arch/arm/boot/dts/marvell/dove-cm-a510.dtsi
> @@ -108,18 +108,12 @@ led-system {
> };
> };
>
> - regulators {
> - compatible = "simple-bus";
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> - wifi_power: regulator@1 {
> - compatible = "regulator-fixed";
> - regulator-name = "WiFi Power";
> - regulator-min-microvolt = <3300000>;
> - regulator-max-microvolt = <3300000>;
> - gpio = <&gpio2 7 GPIO_ACTIVE_HIGH>;
> - };
> + wifi_power: regulator-1 {
> + compatible = "regulator-fixed";
> + regulator-name = "WiFi Power";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + gpio = <&gpio2 7 GPIO_ACTIVE_HIGH>;
> };
> };
>
> diff --git a/arch/arm/boot/dts/marvell/dove-cubox.dts b/arch/arm/boot/dts/marvell/dove-cubox.dts
> index dbba0c8cdab1..bfde99486a87 100644
> --- a/arch/arm/boot/dts/marvell/dove-cubox.dts
> +++ b/arch/arm/boot/dts/marvell/dove-cubox.dts
> @@ -28,24 +28,17 @@ led-power {
> };
> };
>
> - regulators {
> - compatible = "simple-bus";
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> - usb_power: regulator@1 {
> - compatible = "regulator-fixed";
> - reg = <1>;
> - regulator-name = "USB Power";
> - regulator-min-microvolt = <5000000>;
> - regulator-max-microvolt = <5000000>;
> - enable-active-high;
> - regulator-always-on;
> - regulator-boot-on;
> - gpio = <&gpio0 1 0>;
> - pinctrl-0 = <&pmx_gpio_1>;
> - pinctrl-names = "default";
> - };
> + usb_power: regulator-1 {
> + compatible = "regulator-fixed";
> + regulator-name = "USB Power";
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + enable-active-high;
> + regulator-always-on;
> + regulator-boot-on;
> + gpio = <&gpio0 1 0>;
> + pinctrl-0 = <&pmx_gpio_1>;
> + pinctrl-names = "default";
> };
>
> clocks {
> diff --git a/arch/arm/boot/dts/marvell/dove-d3plug.dts b/arch/arm/boot/dts/marvell/dove-d3plug.dts
> index 5aa5d4a7d51d..a451fd576990 100644
> --- a/arch/arm/boot/dts/marvell/dove-d3plug.dts
> +++ b/arch/arm/boot/dts/marvell/dove-d3plug.dts
> @@ -37,24 +37,17 @@ led-status {
> };
> };
>
> - regulators {
> - compatible = "simple-bus";
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> - usb_power: regulator@1 {
> - compatible = "regulator-fixed";
> - reg = <1>;
> - regulator-name = "USB Power";
> - regulator-min-microvolt = <5000000>;
> - regulator-max-microvolt = <5000000>;
> - enable-active-high;
> - regulator-always-on;
> - regulator-boot-on;
> - gpio = <&gpio0 8 0>;
> - pinctrl-0 = <&pmx_gpio_8>;
> - pinctrl-names = "default";
> - };
> + usb_power: regulator-1 {
> + compatible = "regulator-fixed";
> + regulator-name = "USB Power";
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + enable-active-high;
> + regulator-always-on;
> + regulator-boot-on;
> + gpio = <&gpio0 8 0>;
> + pinctrl-0 = <&pmx_gpio_8>;
> + pinctrl-names = "default";
> };
> };
>
> diff --git a/arch/arm/boot/dts/marvell/dove-sbc-a510.dts b/arch/arm/boot/dts/marvell/dove-sbc-a510.dts
> index df021f9b0117..8585ee5533bf 100644
> --- a/arch/arm/boot/dts/marvell/dove-sbc-a510.dts
> +++ b/arch/arm/boot/dts/marvell/dove-sbc-a510.dts
> @@ -76,22 +76,20 @@ chosen {
> stdout-path = &uart0;
> };
>
> - regulators {
> - usb0_power: regulator@2 {
> - compatible = "regulator-fixed";
> - regulator-name = "USB Power";
> - regulator-min-microvolt = <5000000>;
> - regulator-max-microvolt = <5000000>;
> - gpio = <&gpio_ext 0 GPIO_ACTIVE_HIGH>;
> - };
> + usb0_power: regulator-2 {
> + compatible = "regulator-fixed";
> + regulator-name = "USB Power";
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + gpio = <&gpio_ext 0 GPIO_ACTIVE_HIGH>;
> + };
>
> - mmc_power: regulator@3 {
> - compatible = "regulator-fixed";
> - regulator-name = "MMC Power";
> - regulator-min-microvolt = <3300000>;
> - regulator-max-microvolt = <3300000>;
> - gpio = <&gpio_ext 13 GPIO_ACTIVE_HIGH>;
> - };
> + mmc_power: regulator-3 {
> + compatible = "regulator-fixed";
> + regulator-name = "MMC Power";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + gpio = <&gpio_ext 13 GPIO_ACTIVE_HIGH>;
> };
> };
>
> --
> 2.34.1
>
--
Gregory Clement, Bootlin
Embedded Linux and Kernel engineering
http://bootlin.com
next prev parent reply other threads:[~2023-08-12 15:06 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-07-26 7:02 [PATCH 1/2] ARM: dts: marvell: armada: drop incorrect reg in fixed regulators Krzysztof Kozlowski
2023-07-26 7:02 ` [PATCH 2/2] ARM: dts: marvell: dove: " Krzysztof Kozlowski
2023-08-12 15:06 ` Gregory CLEMENT [this message]
2023-08-12 15:06 ` Gregory CLEMENT
2023-08-12 15:05 ` [PATCH 1/2] ARM: dts: marvell: armada: " Gregory CLEMENT
2023-08-12 15:05 ` Gregory CLEMENT
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87msywti5b.fsf@BL-laptop \
--to=gregory.clement@bootlin.com \
--cc=andrew@lunn.ch \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=krzysztof.kozlowski@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=sebastian.hesselbarth@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.