* QCA9074 problem on rk3568
@ 2023-04-20 5:49 Doug Brewer
2023-04-20 12:16 ` Kalle Valo
0 siblings, 1 reply; 4+ messages in thread
From: Doug Brewer @ 2023-04-20 5:49 UTC (permalink / raw)
To: ath11k
Hi,
I tried to install linux kernel 6.3-rc7 on my rk3568 evb. It seems there's
a problem about MHI:
[ 11.340558] ath11k_pci 0002:01:00.0: BAR 0: assigned [mem 0x380000000-0x3801f
ffff 64bit]
[ 11.341399] ath11k_pci 0002:01:00.0: enabling device (0000 -> 0002)
[ 11.422849] ath11k_pci 0002:01:00.0: MSI vectors: 16
[ 11.423335] ath11k_pci 0002:01:00.0: qcn9074 hw1.0
[ 11.660846] mhi mhi0: Requested to power ON
[ 11.661271] mhi mhi0: Power on setup success
[ 31.716289] mhi mhi0: MHI did not load image over BHI, ret: -5
[ 60.551942] mhi mhi0: Device failed to enter READY state
[ 60.552544] mhi mhi0: Error moving from PM state: Firmware Download Error to:
DISABLE
[ 60.553376] ath11k_pci 0002:01:00.0: failed to power up mhi: -110
[ 60.553972] ath11k_pci 0002:01:00.0: failed to start mhi: -110
[ 60.554532] ath11k_pci 0002:01:00.0: failed to power up :-110
[ 60.567907] ath11k_pci 0002:01:00.0: failed to create soc core:
-110
[ 60.568488] ath11k_pci 0002:01:00.0: failed to init core: -110
Any idea how to fix it? Thanks.
- Doug
--
ath11k mailing list
ath11k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath11k
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: QCA9074 problem on rk3568
2023-04-20 5:49 QCA9074 problem on rk3568 Doug Brewer
@ 2023-04-20 12:16 ` Kalle Valo
2023-04-21 1:35 ` Doug Brewer
0 siblings, 1 reply; 4+ messages in thread
From: Kalle Valo @ 2023-04-20 12:16 UTC (permalink / raw)
To: Doug Brewer; +Cc: ath11k
Doug Brewer <brewer.doug@gmail.com> writes:
> I tried to install linux kernel 6.3-rc7 on my rk3568 evb. It seems there's
> a problem about MHI:
>
> [ 11.340558] ath11k_pci 0002:01:00.0: BAR 0: assigned [mem 0x380000000-0x3801f
> ffff 64bit]
> [ 11.341399] ath11k_pci 0002:01:00.0: enabling device (0000 -> 0002)
> [ 11.422849] ath11k_pci 0002:01:00.0: MSI vectors: 16
> [ 11.423335] ath11k_pci 0002:01:00.0: qcn9074 hw1.0
> [ 11.660846] mhi mhi0: Requested to power ON
> [ 11.661271] mhi mhi0: Power on setup success
> [ 31.716289] mhi mhi0: MHI did not load image over BHI, ret: -5
> [ 60.551942] mhi mhi0: Device failed to enter READY state
> [ 60.552544] mhi mhi0: Error moving from PM state: Firmware Download Error to:
> DISABLE
> [ 60.553376] ath11k_pci 0002:01:00.0: failed to power up mhi: -110
> [ 60.553972] ath11k_pci 0002:01:00.0: failed to start mhi: -110
> [ 60.554532] ath11k_pci 0002:01:00.0: failed to power up :-110
> [ 60.567907] ath11k_pci 0002:01:00.0: failed to create soc core:
> -110
> [ 60.568488] ath11k_pci 0002:01:00.0: failed to init core: -110
>
> Any idea how to fix it? Thanks.
I would first check that the firmware files are not corrupted.
--
https://patchwork.kernel.org/project/linux-wireless/list/
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
--
ath11k mailing list
ath11k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath11k
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: QCA9074 problem on rk3568
2023-04-20 12:16 ` Kalle Valo
@ 2023-04-21 1:35 ` Doug Brewer
2023-04-26 7:28 ` Kalle Valo
0 siblings, 1 reply; 4+ messages in thread
From: Doug Brewer @ 2023-04-21 1:35 UTC (permalink / raw)
To: Kalle Valo; +Cc: ath11k
On Thu, Apr 20, 2023 at 8:16 PM Kalle Valo <kvalo@kernel.org> wrote:
>
> Doug Brewer <brewer.doug@gmail.com> writes:
>
> > I tried to install linux kernel 6.3-rc7 on my rk3568 evb. It seems there's
> > a problem about MHI:
> >
> > [ 11.340558] ath11k_pci 0002:01:00.0: BAR 0: assigned [mem 0x380000000-0x3801f
> > ffff 64bit]
> > [ 11.341399] ath11k_pci 0002:01:00.0: enabling device (0000 -> 0002)
> > [ 11.422849] ath11k_pci 0002:01:00.0: MSI vectors: 16
> > [ 11.423335] ath11k_pci 0002:01:00.0: qcn9074 hw1.0
> > [ 11.660846] mhi mhi0: Requested to power ON
> > [ 11.661271] mhi mhi0: Power on setup success
> > [ 31.716289] mhi mhi0: MHI did not load image over BHI, ret: -5
> > [ 60.551942] mhi mhi0: Device failed to enter READY state
> > [ 60.552544] mhi mhi0: Error moving from PM state: Firmware Download Error to:
> > DISABLE
> > [ 60.553376] ath11k_pci 0002:01:00.0: failed to power up mhi: -110
> > [ 60.553972] ath11k_pci 0002:01:00.0: failed to start mhi: -110
> > [ 60.554532] ath11k_pci 0002:01:00.0: failed to power up :-110
> > [ 60.567907] ath11k_pci 0002:01:00.0: failed to create soc core:
> > -110
> > [ 60.568488] ath11k_pci 0002:01:00.0: failed to init core: -110
> >
> > Any idea how to fix it? Thanks.
>
> I would first check that the firmware files are not corrupted.
# sha256sum amss.bin board-2.bin m3.bin
5ee1b7b204541b5f99984f21d694ececaec08fbce1b520ffe6fe740b02a4afd7 amss.bin
dbf0ca14aa1229eccd48f26f1026901b9718b143bd30b51b8ea67c84ba6207f1 board-2.bin
b6d957f335073a15a8de809398e1506f0200a08747eaf7189c843cf519ffc1de m3.bin
The firmware files look good, thanks.
- Doug
--
ath11k mailing list
ath11k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath11k
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: QCA9074 problem on rk3568
2023-04-21 1:35 ` Doug Brewer
@ 2023-04-26 7:28 ` Kalle Valo
0 siblings, 0 replies; 4+ messages in thread
From: Kalle Valo @ 2023-04-26 7:28 UTC (permalink / raw)
To: Doug Brewer; +Cc: ath11k
Doug Brewer <brewer.doug@gmail.com> writes:
> On Thu, Apr 20, 2023 at 8:16 PM Kalle Valo <kvalo@kernel.org> wrote:
>
>>
>> Doug Brewer <brewer.doug@gmail.com> writes:
>>
>> > I tried to install linux kernel 6.3-rc7 on my rk3568 evb. It seems there's
>> > a problem about MHI:
>> >
>> > [ 11.340558] ath11k_pci 0002:01:00.0: BAR 0: assigned [mem 0x380000000-0x3801f
>> > ffff 64bit]
>> > [ 11.341399] ath11k_pci 0002:01:00.0: enabling device (0000 -> 0002)
>> > [ 11.422849] ath11k_pci 0002:01:00.0: MSI vectors: 16
>> > [ 11.423335] ath11k_pci 0002:01:00.0: qcn9074 hw1.0
>> > [ 11.660846] mhi mhi0: Requested to power ON
>> > [ 11.661271] mhi mhi0: Power on setup success
>> > [ 31.716289] mhi mhi0: MHI did not load image over BHI, ret: -5
>> > [ 60.551942] mhi mhi0: Device failed to enter READY state
>> > [ 60.552544] mhi mhi0: Error moving from PM state: Firmware Download Error to:
>> > DISABLE
>> > [ 60.553376] ath11k_pci 0002:01:00.0: failed to power up mhi: -110
>> > [ 60.553972] ath11k_pci 0002:01:00.0: failed to start mhi: -110
>> > [ 60.554532] ath11k_pci 0002:01:00.0: failed to power up :-110
>> > [ 60.567907] ath11k_pci 0002:01:00.0: failed to create soc core:
>> > -110
>> > [ 60.568488] ath11k_pci 0002:01:00.0: failed to init core: -110
>> >
>> > Any idea how to fix it? Thanks.
>>
>> I would first check that the firmware files are not corrupted.
>
> # sha256sum amss.bin board-2.bin m3.bin
> 5ee1b7b204541b5f99984f21d694ececaec08fbce1b520ffe6fe740b02a4afd7 amss.bin
> dbf0ca14aa1229eccd48f26f1026901b9718b143bd30b51b8ea67c84ba6207f1 board-2.bin
> b6d957f335073a15a8de809398e1506f0200a08747eaf7189c843cf519ffc1de m3.bin
>
> The firmware files look good, thanks.
Indeed, the firmware files don't seem to be corrupted. This is a weird
problem, I don't recall seeing anything like this before. Some other
ideas to try out:
* if you have access to the Qualcomm in-house QSDK driver (don't know
what they call it nowadays) trying that would be good for ruling out
hardware problems
* try older kernel
* try older firmware
* try the QCN9074 on a different platform
But these are just shots in the dark, I can't really guess what the
problem could be. The error comes from the very early during driver
initialisation so most likely a low level issue. I don't have QCN9074 in
my testbed so of course this could be a simple regression somewhere as
well.
--
https://patchwork.kernel.org/project/linux-wireless/list/
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
--
ath11k mailing list
ath11k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath11k
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2023-04-26 7:28 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2023-04-20 5:49 QCA9074 problem on rk3568 Doug Brewer
2023-04-20 12:16 ` Kalle Valo
2023-04-21 1:35 ` Doug Brewer
2023-04-26 7:28 ` Kalle Valo
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.