diff for duplicates of <87mvdgahni.fsf@free-electrons.com> diff --git a/a/1.txt b/N1/1.txt index f7d5a35..2b45c85 100644 --- a/a/1.txt +++ b/N1/1.txt @@ -1,24 +1,23 @@ Hi Russell King, -=20 - On lun., f=C3=A9vr. 20 2017, Russell King - ARM Linux <linux@armlinux.org.= -uk> wrote: + + On lun., f?vr. 20 2017, Russell King - ARM Linux <linux@armlinux.org.uk> wrote: > On Mon, Feb 20, 2017 at 06:06:11PM +0100, Gregory CLEMENT wrote: >> I saw on IRC than Russell managed to have a more coherent date with this >> series on his 8040 based board. For the record, as the U-Boot on this >> board didn't provide a "date reset" command for the RTC located on CP >> slave, then Russell needed to do the following: ->>=20 +>> >> devmem2 0xf428401c w 0 >> devmem2 0xf4284018 w 0x2000 >> followed by: >> date 021612342017; ntpdate ...; hwclock -uw ->>=20 +>> >> But this issue was related to the bootloader not to the kernel. The >> other potential issue seen by Russell was about the GIC mapping for the >> interrupt, but here again this mapping was done by the 1st stage >> bootloader. ->>=20 +>> >> Given this information would it be OK to applied this series? > > No it is not. As I already pointed out, the interrupt for the 8040 is @@ -34,25 +33,13 @@ Thanks, Gregory > -> --=20 +> -- > RMK's Patch system: http://www.armlinux.org.uk/developer/patches/ > FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up > according to speedtest.net. ---=20 +-- Gregory Clement, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com - ---=20 -You received this message because you are subscribed to "rtc-linux". -Membership options at http://groups.google.com/group/rtc-linux . -Please read http://groups.google.com/group/rtc-linux/web/checklist -before submitting a driver. ----=20 -You received this message because you are subscribed to the Google Groups "= -rtc-linux" group. -To unsubscribe from this group and stop receiving emails from it, send an e= -mail to rtc-linux+unsubscribe@googlegroups.com. -For more options, visit https://groups.google.com/d/optout. diff --git a/a/content_digest b/N1/content_digest index 4ad0456..3285d4c 100644 --- a/a/content_digest +++ b/N1/content_digest @@ -1,42 +1,32 @@ "ref\020170217101907.8963-1-gregory.clement@free-electrons.com\0" "ref\087tw7oaj24.fsf@free-electrons.com\0" "ref\020170220172739.GN21222@n2100.armlinux.org.uk\0" - "From\0Gregory CLEMENT <gregory.clement@free-electrons.com>\0" - "Subject\0[rtc-linux] Re: [PATCH v2 0/3] Extend rtc-armada38x support for Armada 7K/8K\0" + "From\0gregory.clement@free-electrons.com (Gregory CLEMENT)\0" + "Subject\0[PATCH v2 0/3] Extend rtc-armada38x support for Armada 7K/8K\0" "Date\0Mon, 20 Feb 2017 18:36:33 +0100\0" - "To\0Russell King - ARM Linux <linux@armlinux.org.uk>\0" - "Cc\0Alessandro Zummo <a.zummo@towertech.it>" - Thomas Petazzoni <thomas.petazzoni@free-electrons.com> - Andrew Lunn <andrew@lunn.ch> - Jason Cooper <jason@lakedaemon.net> - rtc-linux@googlegroups.com - Haim Boot <hayim@marvell.com> - Alexandre Belloni <alexandre.belloni@free-electrons.com> - linux-arm-kernel@lists.infradead.org - " Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>\0" + "To\0linux-arm-kernel@lists.infradead.org\0" "\00:1\0" "b\0" "Hi Russell King,\n" - "=20\n" - " On lun., f=C3=A9vr. 20 2017, Russell King - ARM Linux <linux@armlinux.org.=\n" - "uk> wrote:\n" + " \n" + " On lun., f?vr. 20 2017, Russell King - ARM Linux <linux@armlinux.org.uk> wrote:\n" "\n" "> On Mon, Feb 20, 2017 at 06:06:11PM +0100, Gregory CLEMENT wrote:\n" ">> I saw on IRC than Russell managed to have a more coherent date with this\n" ">> series on his 8040 based board. For the record, as the U-Boot on this\n" ">> board didn't provide a \"date reset\" command for the RTC located on CP\n" ">> slave, then Russell needed to do the following:\n" - ">>=20\n" + ">> \n" ">> devmem2 0xf428401c w 0\n" ">> devmem2 0xf4284018 w 0x2000\n" ">> followed by:\n" ">> date 021612342017; ntpdate ...; hwclock -uw\n" - ">>=20\n" + ">> \n" ">> But this issue was related to the bootloader not to the kernel. The\n" ">> other potential issue seen by Russell was about the GIC mapping for the\n" ">> interrupt, but here again this mapping was done by the 1st stage\n" ">> bootloader.\n" - ">>=20\n" + ">> \n" ">> Given this information would it be OK to applied this series?\n" ">\n" "> No it is not. As I already pointed out, the interrupt for the 8040 is\n" @@ -52,27 +42,15 @@ "Gregory\n" "\n" ">\n" - "> --=20\n" + "> -- \n" "> RMK's Patch system: http://www.armlinux.org.uk/developer/patches/\n" "> FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up\n" "> according to speedtest.net.\n" "\n" - "--=20\n" + "-- \n" "Gregory Clement, Free Electrons\n" "Kernel, drivers, real-time and embedded Linux\n" "development, consulting, training and support.\n" - "http://free-electrons.com\n" - "\n" - "--=20\n" - "You received this message because you are subscribed to \"rtc-linux\".\n" - "Membership options at http://groups.google.com/group/rtc-linux .\n" - "Please read http://groups.google.com/group/rtc-linux/web/checklist\n" - "before submitting a driver.\n" - "---=20\n" - "You received this message because you are subscribed to the Google Groups \"=\n" - "rtc-linux\" group.\n" - "To unsubscribe from this group and stop receiving emails from it, send an e=\n" - "mail to rtc-linux+unsubscribe@googlegroups.com.\n" - For more options, visit https://groups.google.com/d/optout. + http://free-electrons.com -f1b2768720191286164b930e0dcea4bd1437ae80249ac47db9b14a7ee13c6343 +f02a2b91c2b6ad4feb9c4bd87a07b81f89d6e09d2b03b7f2e73a8c7fc7431518
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.