From: Yoshinori Sato <ysato@users.sourceforge.jp>
To: linux-arch@vger.kernel.org
Subject: [PATCH 09/16] h8300: kernel startup
Date: Wed, 21 Jan 2015 13:30:08 +0900 [thread overview]
Message-ID: <87mw5cvjqn.wl-ysato@users.sourceforge.jp> (raw)
In-Reply-To: <cover.1421813622.git.ysato@users.sourceforge.jp>
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
create mode 100644 arch/h8300/boot/Makefile
create mode 100644 arch/h8300/boot/compressed/Makefile
create mode 100644 arch/h8300/boot/compressed/head.S
create mode 100644 arch/h8300/boot/compressed/misc.c
create mode 100644 arch/h8300/boot/compressed/vmlinux.lds
create mode 100644 arch/h8300/boot/compressed/vmlinux.scr
create mode 100644 arch/h8300/kernel/head_ram.S
create mode 100644 arch/h8300/kernel/head_rom.S
diff --git a/arch/h8300/boot/Makefile b/arch/h8300/boot/Makefile
new file mode 100644
index 0000000..5072b36
--- /dev/null
+++ b/arch/h8300/boot/Makefile
@@ -0,0 +1,27 @@
+# arch/h8300/boot/Makefile
+
+targets := vmlinux.srec vmlinux.bin zImage
+subdir- := compressed
+
+OBJCOPYFLAGS_vmlinux.srec := -Osrec
+OBJCOPYFLAGS_vmlinux.bin := -Obinary
+OBJCOPYFLAGS_zImage := -O binary -R .note -R .comment -R .stab -R .stabstr -S
+
+UIMAGE_LOADADDR = $(CONFIG_RAMBASE)
+UIMAGE_ENTRYADDR = $(shell /bin/bash -c 'printf "0x%08x" \
+ $$[$(CONFIG_RAMBASE) + $(CONFIG_OFFSET)]')
+
+$(obj)/vmlinux.srec $(obj)/vmlinux.bin: vmlinux FORCE
+ $(call if_changed,objcopy)
+
+$(obj)/zImage: $(obj)/compressed/vmlinux FORCE
+ $(call if_changed,objcopy)
+
+$(obj)/compressed/vmlinux: FORCE
+ $(Q)$(MAKE) $(build)=$(obj)/compressed $@
+
+$(obj)/uImage.bin: $(obj)/vmlinux.bin
+ $(call if_changed,uimage,none)
+
+CLEAN_FILES += arch/$(ARCH)/vmlinux.bin arch/$(ARCH)/vmlinux.srec arch/$(ARCH)/uImage.bin
+
diff --git a/arch/h8300/boot/compressed/Makefile b/arch/h8300/boot/compressed/Makefile
new file mode 100644
index 0000000..87d03b7
--- /dev/null
+++ b/arch/h8300/boot/compressed/Makefile
@@ -0,0 +1,37 @@
+#
+# linux/arch/sh/boot/compressed/Makefile
+#
+# create a compressed vmlinux image from the original vmlinux
+#
+
+targets := vmlinux vmlinux.bin vmlinux.bin.gz head.o misc.o piggy.o
+
+OBJECTS = $(obj)/head.o $(obj)/misc.o
+
+#
+# IMAGE_OFFSET is the load offset of the compression loader
+# Assign dummy values if these 2 variables are not defined,
+# in order to suppress error message.
+#
+CONFIG_MEMORY_START ?= 0x00400000
+CONFIG_BOOT_LINK_OFFSET ?= 0x00140000
+IMAGE_OFFSET := $(shell printf "0x%08x" $$(($(CONFIG_MEMORY_START)+$(CONFIG_BOOT_LINK_OFFSET))))
+
+LIBGCC := $(shell $(CROSS-COMPILE)$(CC) $(KBUILD_CFLAGS) -print-libgcc-file-name)
+LDFLAGS_vmlinux := -Ttext $(IMAGE_OFFSET) -estartup $(obj)/vmlinux.lds
+
+$(obj)/vmlinux: $(OBJECTS) $(obj)/piggy.o $(LIBGCC) FORCE
+ $(call if_changed,ld)
+ @:
+
+$(obj)/vmlinux.bin: vmlinux FORCE
+ $(call if_changed,objcopy)
+
+$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE
+ $(call if_changed,gzip)
+
+LDFLAGS_piggy.o := -r --format binary --oformat elf32-h8300-linux -T
+OBJCOPYFLAGS := -O binary
+
+$(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/vmlinux.bin.gz FORCE
+ $(call if_changed,ld)
diff --git a/arch/h8300/boot/compressed/head.S b/arch/h8300/boot/compressed/head.S
new file mode 100644
index 0000000..74c0d8cc
--- /dev/null
+++ b/arch/h8300/boot/compressed/head.S
@@ -0,0 +1,48 @@
+/*
+ * linux/arch/h8300/boot/compressed/head.S
+ *
+ * Copyright (C) 2006 Yoshinori Sato
+ */
+
+#include <linux/linkage.h>
+
+ .section .text..startup,"ax"
+ .global startup
+startup:
+ mov.l er0, er4
+ mov.l er0, sp
+ mov.l #__sbss, er0
+ mov.l #__ebss, er1
+ sub.l er0, er1
+ shlr er1
+ shlr er1
+ sub.l er2, er2
+1:
+ mov.l er2, @er0
+ adds #4, er0
+ dec.l #1, er1
+ bne 1b
+ jsr @decompress_kernel
+ mov.l er4, er0
+ jmp @0x400000
+
+ .align 9
+fake_headers_as_bzImage:
+ .word 0
+ .ascii "HdrS" ; header signature
+ .word 0x0202 ; header version number (>= 0x0105)
+ ; or else old loadlin-1.5 will fail)
+ .word 0 ; default_switch
+ .word 0 ; SETUPSEG
+ .word 0x1000
+ .word 0 ; pointing to kernel version string
+ .byte 0 ; = 0, old one (LILO, Loadlin,
+ ; 0xTV: T=0 for LILO
+ ; V = version
+ .byte 1 ; Load flags bzImage=1
+ .word 0x8000 ; size to move, when setup is not
+ .long 0x100000 ; 0x100000 = default for big kernel
+ .long 0 ; address of loaded ramdisk image
+ .long 0 ; its size in bytes
+
+ .end
diff --git a/arch/h8300/boot/compressed/misc.c b/arch/h8300/boot/compressed/misc.c
new file mode 100644
index 0000000..7042741
--- /dev/null
+++ b/arch/h8300/boot/compressed/misc.c
@@ -0,0 +1,74 @@
+/*
+ * arch/h8300/boot/compressed/misc.c
+ *
+ * This is a collection of several routines from gzip-1.0.3
+ * adapted for Linux.
+ *
+ * malloc by Hannu Savolainen 1993 and Matthias Urlichs 1994
+ *
+ * Adapted for h8300 by Yoshinori Sato 2006
+ */
+
+#include <asm/uaccess.h>
+
+/*
+ * gzip declarations
+ */
+
+#define OF(args) args
+#define STATIC static
+
+#undef memset
+#undef memcpy
+#define memzero(s, n) memset((s), (0), (n))
+
+extern int _end;
+static unsigned long free_mem_ptr;
+static unsigned long free_mem_end_ptr;
+
+extern char input_data[];
+extern int input_len;
+static unsigned char *output;
+
+#define HEAP_SIZE 0x10000
+
+#include "../../../../lib/decompress_inflate.c"
+
+void *memset(void *s, int c, size_t n)
+{
+ int i;
+ char *ss = (char *)s;
+
+ for (i = 0; i < n; i++)
+ ss[i] = c;
+ return s;
+}
+
+void *memcpy(void *dest, const void *src, size_t n)
+{
+ int i;
+ char *d = (char *)dest, *s = (char *)src;
+
+ for (i = 0; i < n; i++)
+ d[i] = s[i];
+ return dest;
+}
+
+static void error(char *x)
+{
+
+ while (1)
+ ; /* Halt */
+}
+
+#define STACK_SIZE (4096)
+long user_stack[STACK_SIZE];
+long *stack_start = &user_stack[STACK_SIZE];
+
+void decompress_kernel(void)
+{
+ free_mem_ptr = (unsigned long)&_end;
+ free_mem_end_ptr = free_mem_ptr + HEAP_SIZE;
+
+ decompress(input_data, input_len, NULL, NULL, output, NULL, error);
+}
diff --git a/arch/h8300/boot/compressed/vmlinux.lds b/arch/h8300/boot/compressed/vmlinux.lds
new file mode 100644
index 0000000..a0a3a0e
--- /dev/null
+++ b/arch/h8300/boot/compressed/vmlinux.lds
@@ -0,0 +1,32 @@
+SECTIONS
+{
+ .text :
+ {
+ __stext = . ;
+ __text = .;
+ *(.text..startup)
+ *(.text)
+ __etext = . ;
+ }
+
+ .rodata :
+ {
+ *(.rodata)
+ }
+ .data :
+
+ {
+ __sdata = . ;
+ ___data_start = . ;
+ *(.data.*)
+ }
+ .bss :
+ {
+ . = ALIGN(0x4) ;
+ __sbss = . ;
+ *(.bss*)
+ . = ALIGN(0x4) ;
+ __ebss = . ;
+ __end = . ;
+ }
+}
diff --git a/arch/h8300/boot/compressed/vmlinux.scr b/arch/h8300/boot/compressed/vmlinux.scr
new file mode 100644
index 0000000..a0849036
--- /dev/null
+++ b/arch/h8300/boot/compressed/vmlinux.scr
@@ -0,0 +1,9 @@
+SECTIONS
+{
+ .data : {
+ input_len = .;
+ LONG(input_data_end - input_data) input_data = .;
+ *(.data)
+ input_data_end = .;
+ }
+}
diff --git a/arch/h8300/kernel/head_ram.S b/arch/h8300/kernel/head_ram.S
new file mode 100644
index 0000000..f64b3d9
--- /dev/null
+++ b/arch/h8300/kernel/head_ram.S
@@ -0,0 +1,60 @@
+
+#include <linux/sys.h>
+#include <linux/init.h>
+#include <asm/unistd.h>
+#include <asm/setup.h>
+#include <asm/segment.h>
+#include <asm/linkage.h>
+#include <asm/asm-offsets.h>
+#include <asm/thread_info.h>
+#include <asm/errno.h>
+
+#if defined(CONFIG_CPU_H8300H)
+ .h8300h
+#define SYSCR 0xfee012
+#define IRAMTOP 0xffff20
+#endif
+#if defined(CONFIG_CPU_H8S)
+ .h8300s
+#define INTCR 0xffff31
+#define IRAMTOP 0xffc000
+#endif
+
+ __HEAD
+ .global _start
+_start:
+ mov.l #IRAMTOP,sp
+ /* .bss clear */
+ mov.l #_sbss,er5
+ mov.l #_ebss,er4
+ sub.l er5,er4
+ shlr er4
+ shlr er4
+ sub.l er1,er1
+1:
+ mov.l er1,@er5
+ adds #4,er5
+ dec.l #1,er4
+ bne 1b
+ jsr @parse_bootparam
+
+ /* linux kernel start */
+#if defined(CONFIG_CPU_H8300H)
+ ldc #0xd0,ccr /* running kernel */
+ mov.l #SYSCR,er0
+ bclr #3,@er0
+#endif
+#if defined(CONFIG_CPU_H8S)
+ ldc #0x07,exr
+ bclr #4,@INTCR:8
+ bset #5,@INTCR:8 /* Interrupt mode 2 */
+ ldc #0x90,ccr /* running kernel */
+#endif
+ mov.l #init_thread_union,sp
+ add.l #0x2000,sp
+ jsr @start_kernel
+
+1:
+ bra 1b
+
+ .end
diff --git a/arch/h8300/kernel/head_rom.S b/arch/h8300/kernel/head_rom.S
new file mode 100644
index 0000000..60ca8fa
--- /dev/null
+++ b/arch/h8300/kernel/head_rom.S
@@ -0,0 +1,108 @@
+#include <linux/init.h>
+#include <asm/thread_info.h>
+
+#if defined(CONFIG_CPU_H8300H)
+ .h8300h
+#define SYSCR 0xfee012
+#define IRAMTOP 0xffff20
+#define NR_INT 64
+#endif
+#if defined(CONFIG_CPU_H8S)
+ .h8300s
+#define INTCR 0xffff31
+#define IRAMTOP 0xffc000
+#define NR_INT 128
+#endif
+
+ __HEAD
+ .global _start
+_start:
+ mov.l #IRAMTOP,sp
+#if !defined(CONFIG_H8300H_SIM) && \
+ !defined(CONFIG_H8S_SIM)
+ jsr @lowlevel_init
+
+ /* copy .data */
+ mov.l #_begin_data,er5
+ mov.l #_sdata,er6
+ mov.l #_edata,er4
+ sub.l er6,er4
+ shlr.l er4
+ shlr.l er4
+1:
+ mov.l @er5+,er0
+ mov.l er0,@er6
+ adds #4,er6
+ dec.l #1,er4
+ bne 1b
+ /* .bss clear */
+ mov.l #_sbss,er5
+ mov.l #_ebss,er4
+ sub.l er5,er4
+ shlr er4
+ shlr er4
+ sub.l er0,er0
+1:
+ mov.l er0,@er5
+ adds #4,er5
+ dec.l #1,er4
+ bne 1b
+#else
+ /* get cmdline from gdb */
+ jsr @0xcc
+ ;; er0 - argc
+ ;; er1 - argv
+ mov.l #command_line,er3
+ adds #4,er1
+ dec.l #1,er0
+ beq 4f
+1:
+ mov.l @er1+,er2
+2:
+ mov.b @er2+,r4l
+ beq 3f
+ mov.b r4l,@er3
+ adds #1,er3
+ bra 2b
+3:
+ mov.b #' ',r4l
+ mov.b r4l,@er3
+ adds #1,er3
+ dec.l #1,er0
+ bne 1b
+ subs #1,er3
+ mov.b #0,r4l
+ mov.b r4l,@er3
+4:
+#endif
+ /* linux kernel start */
+#if defined(CONFIG_CPU_H8300H)
+ ldc #0xd0,ccr /* running kernel */
+ mov.l #SYSCR,er0
+ bclr #3,@er0
+#endif
+#if defined(CONFIG_CPU_H8S)
+ ldc #0x07,exr
+ bclr #4,@INTCR:8
+ bset #5,@INTCR:8 /* Interrupt mode 2 */
+ ldc #0x90,ccr /* running kernel */
+#endif
+ mov.l #init_thread_union,sp
+ add.l #0x2000,sp
+ jsr @start_kernel
+
+1:
+ bra 1b
+
+#if defined(CONFIG_ROMKERNEL)
+ /* interrupt vector */
+ .section .vectors,"ax"
+ .long _start
+ .long _start
+vector = 2
+ .rept NR_INT - 2
+ .long _interrupt_redirect_table+vector*4
+vector = vector + 1
+ .endr
+#endif
+ .end
--
2.1.3
next prev parent reply other threads:[~2015-01-21 4:58 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <cover.1421813622.git.ysato@users.sourceforge.jp>
2015-01-21 4:23 ` [PATCH 01/16] h8300: Assembly headers Yoshinori Sato
2015-01-21 11:02 ` Geert Uytterhoeven
2015-01-21 17:22 ` Yoshinori Sato
2015-01-21 4:23 ` [PATCH 02/16] h8300: UAPI headers Yoshinori Sato
2015-01-21 8:46 ` Arnd Bergmann
2015-01-21 17:16 ` Yoshinori Sato
2015-01-21 4:24 ` [PATCH 03/16] h8300: defconfigs Yoshinori Sato
2015-01-21 8:47 ` Arnd Bergmann
2015-01-21 4:24 ` [PATCH 04/16] h8300: Memory management Yoshinori Sato
2015-01-21 10:57 ` Geert Uytterhoeven
2015-01-21 17:20 ` Yoshinori Sato
2015-01-21 4:25 ` [PATCH 05/16] h8300: Target depend (hw define) part Yoshinori Sato
2015-01-21 4:27 ` [PATCH 06/16] drivers: Add h8300 Yoshinori Sato
2015-01-21 11:03 ` Geert Uytterhoeven
2015-01-21 17:23 ` Yoshinori Sato
2015-01-21 4:29 ` [PATCH 07/16] Add ELF machine Yoshinori Sato
2015-01-21 4:29 ` [PATCH 08/16] h8300: Build scripts Yoshinori Sato
2015-01-21 4:30 ` Yoshinori Sato [this message]
2015-01-21 4:30 ` [PATCH 10/16] h8300: Exception and Interrupt handler Yoshinori Sato
2015-01-21 4:31 ` [PATCH 11/16] h8300: Libraries Yoshinori Sato
2015-01-21 4:31 ` [PATCH 12/16] h8300: clocksource Yoshinori Sato
2015-01-21 8:49 ` Arnd Bergmann
2015-01-21 17:06 ` Yoshinori Sato
2015-01-21 4:31 ` [PATCH 13/16] h8300: ptrace helper Yoshinori Sato
2015-01-21 8:51 ` Arnd Bergmann
2015-01-21 17:08 ` Yoshinori Sato
2015-01-21 4:32 ` [PATCH 14/16] h8300: signal handler Yoshinori Sato
2015-01-21 4:32 ` [PATCH 15/16] h8300: system call entry table Yoshinori Sato
2015-01-21 4:32 ` [PATCH 16/16] h8300: misc functions Yoshinori Sato
2015-01-21 9:01 ` Arnd Bergmann
2015-01-21 17:19 ` Yoshinori Sato
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87mw5cvjqn.wl-ysato@users.sourceforge.jp \
--to=ysato@users.sourceforge.jp \
--cc=linux-arch@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.