[PATCH 08/16] h8300: Build scripts

[Yoshinori Sato <ysato@users.sourceforge.jp>]

Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>

 create mode 100644 arch/h8300/Kconfig
 create mode 100644 arch/h8300/Kconfig.cpu
 create mode 100644 arch/h8300/Kconfig.debug
 create mode 100644 arch/h8300/Makefile

diff --git a/arch/h8300/Kconfig b/arch/h8300/Kconfig
new file mode 100644
index 0000000..970dd9a
--- /dev/null
+++ b/arch/h8300/Kconfig
@@ -0,0 +1,121 @@
+config H8300
+	bool
+	default y
+	select HAVE_IDE
+	select GENERIC_ATOMIC64
+	select HAVE_UID16
+	select VIRT_TO_BUS
+	select ARCH_WANT_IPC_PARSE_VERSION
+	select GENERIC_IRQ_SHOW
+	select ARCH_WANT_FRAME_POINTER
+	select GENERIC_CPU_DEVICES
+	select MODULES_USE_ELF_RELA
+	select GENERIC_CLOCKEVENTS
+	select CLKDEV_LOOKUP
+
+config MMU
+	bool
+	default n
+
+config SWAP
+	bool
+	default n
+
+config ZONE_DMA
+	bool
+	default y
+
+config FPU
+	bool
+	default n
+
+config RWSEM_GENERIC_SPINLOCK
+	bool
+	default y
+
+config RWSEM_XCHGADD_ALGORITHM
+	bool
+	default n
+
+config ARCH_HAS_ILOG2_U32
+	bool
+	default n
+
+config ARCH_HAS_ILOG2_U64
+	bool
+	default n
+
+config GENERIC_HWEIGHT
+	bool
+	default y
+
+config GENERIC_CALIBRATE_DELAY
+	bool
+	default y
+
+config GENERIC_BUG
+        bool
+        depends on BUG
+
+config TIME_LOW_RES
+	bool
+	default y
+
+config NO_IOPORT
+	def_bool y
+
+config NO_DMA
+	def_bool y
+
+config ISA
+	bool
+	default y
+
+config PCI
+	bool
+	default n
+
+config HZ
+	int
+	default 100
+
+config NR_CPUS
+        int
+	default 1
+
+config NO_IOPORT_MAP
+        def_bool y
+
+source "init/Kconfig"
+
+source "kernel/Kconfig.freezer"
+
+source "arch/h8300/Kconfig.cpu"
+
+menu "Kernel Features"
+
+source "kernel/Kconfig.preempt"
+
+source "mm/Kconfig"
+
+endmenu
+
+menu "Executable file formats"
+
+source "fs/Kconfig.binfmt"
+
+endmenu
+
+source "net/Kconfig"
+
+source "drivers/Kconfig"
+
+source "fs/Kconfig"
+
+source "arch/h8300/Kconfig.debug"
+
+source "security/Kconfig"
+
+source "crypto/Kconfig"
+
+source "lib/Kconfig"
diff --git a/arch/h8300/Kconfig.cpu b/arch/h8300/Kconfig.cpu
new file mode 100644
index 0000000..5fe6c5e
--- /dev/null
+++ b/arch/h8300/Kconfig.cpu
@@ -0,0 +1,132 @@
+menu "Processor type and features"
+
+choice
+	prompt "H8/300 platform"
+
+config H8300_AE3068
+	bool "AE-3068/69"
+	select H83069
+	select RAMKERNEL
+	help
+	  AKI-H8/3068F / AKI-H8/3069F Flashmicom LAN Board Support
+	  More Information. (Japanese Only)
+	  <http://akizukidenshi.com/catalog/default.aspx>
+	  AE-3068/69 Evaluation Board Support
+	  More Information.
+	  <http://www.microtronique.com/ae3069lan.htm>
+
+config H8300_H8MAX
+	bool "H8MAX"
+	select H83069
+	select RAMKERNEL
+	help
+	  H8MAX Evaluation Board Support
+	  More Information. (Japanese Only)
+	  <http://strawberry-linux.com/h8/index.html>
+
+config H8300_KANEBEBE
+	bool "KaneBebe"
+	select H83069
+	select RAMKERNEL
+	help
+	  KaneBebe Evalition Board Support
+
+config H8300H_SIM
+	bool "H8/300H GDB Simulator"
+	select H83069
+	select ROMKERNEL
+	help
+	  GDB Simulator Support
+	  More Information.
+	  <http://sourceware.org/sid/>
+
+config H8S_EDOSK2674
+	bool "EDOSK-2674"
+	select H8S2678
+	select RAMKERNEL
+	help
+	  Renesas EDOSK-2674 Evaluation Board Support
+	  More Information.
+	  <http://www.azpower.com/H8-uClinux/index.html>
+ 	  <http://www.renesas.eu/products/tools/introductory_evaluation_tools/evaluation_development_os_kits/edosk2674r/edosk2674r_software_tools_root.jsp>
+
+config H8S_SIM
+	bool "H8S GDB Simulator"
+	select H8S2678
+	select ROMKERNEL
+	help
+	  GDB Simulator Support
+	  More Information.
+	  <http://sourceware.org/sid/>
+
+endchoice
+
+choice
+	prompt "CPU Selection"
+
+config H83069
+	bool "H8/3065,3066,3067,3068,3069"
+	select CPU_H8300H
+
+config H8S2678
+	bool "H8S/2670,2673,2674R,2675,2676"
+	select CPU_H8S
+
+endchoice
+
+config CPU_CLOCK
+	int "CPU Clock Frequency"
+	depends on ROMKERNEL
+	default "200000000" if H8300H_AKI3068NET || H8300H_SIM
+	default "250000000" if H8300H_H8MAX || H8300H_KANEBEBE
+	default "333333333" if H8S_EDOSK2674 || H8S_SIM
+	help
+	  CPU Clock Frequency
+
+choice
+	prompt "Kernel executes from"
+	---help---
+	  Choose the memory type that the kernel will be running in.
+
+config RAMKERNEL
+	bool "RAM"
+	help
+	  The kernel will be resident in RAM when running.
+
+config ROMKERNEL
+	bool "ROM"
+	help
+	  The kernel will be resident in FLASH/ROM when running.
+endchoice
+
+config CPU_H8300H
+	bool
+	depends on H83069
+	default y
+
+config CPU_H8S
+	bool
+	depends on H8S2678
+	default y
+
+config ROMSIZE
+	hex "ROM size"
+	depends on ROMKERNEL
+	default 0x200000
+
+config RAMBASE
+	hex "RAM base address"
+	default 0x400000
+
+config RAMSIZE
+	hex "RAM size"
+	depends on ROMKERNEL
+	default 0x200000 if H8300_AE3068 || H8300_H8MAX || H8300H_SIM
+	default 0x400000 if H8300_KANEBEBE
+	default 0x800000 if H8S_EDOSK2674 || H8S_SIM
+
+config OFFSET
+        hex "Load offset"
+	default 0
+
+endmenu
diff --git a/arch/h8300/Kconfig.debug b/arch/h8300/Kconfig.debug
new file mode 100644
index 0000000..ff2e592
--- /dev/null
+++ b/arch/h8300/Kconfig.debug
@@ -0,0 +1,65 @@
+menu "Kernel hacking"
+
+source "lib/Kconfig.debug"
+
+config FULLDEBUG
+	bool "Full Symbolic/Source Debugging support"
+	help
+	  Enable debugging symbols on kernel build.
+
+config HIGHPROFILE
+	bool "Use fast second timer for profiling"
+	help
+	  Use a fast secondary clock to produce profiling information.
+
+config NO_KERNEL_MSG
+	bool "Suppress Kernel BUG Messages"
+	help
+	  Do not output any debug BUG messages within the kernel.
+
+config EARLY_PRINTK
+        bool "Early printk support"
+
+config SYSCALL_PRINT
+	bool "SystemCall trace print"
+	help
+	  output history of systemcall
+
+config GDB_DEBUG
+   	bool "Use gdb stub"
+	depends on (!H8300H_SIM && !H8S_SIM)
+	help
+	  gdb stub exception support
+
+config SH_STANDARD_BIOS
+	bool "Use gdb protocol serial console"
+	depends on (!H8300H_SIM && !H8S_SIM)
+	help
+	  serial console output using GDB protocol.
+	  Require eCos/RedBoot
+
+config DEFAULT_CMDLINE
+	bool "Use builtin commandline"
+	default n
+	help
+	  builtin kernel commandline enabled.
+
+config KERNEL_COMMAND
+	string "Buildin command string"
+	depends on DEFAULT_CMDLINE
+	help
+	  builtin kernel commandline strings.
+
+config BLKDEV_RESERVE
+	bool "BLKDEV Reserved Memory"
+	default n
+	help
+	  Reserved BLKDEV area.
+
+config BLKDEV_RESERVE_ADDRESS
+	hex 'start address'
+	depends on BLKDEV_RESERVE
+	help
+	  BLKDEV start address.
+
+endmenu
diff --git a/arch/h8300/Makefile b/arch/h8300/Makefile
new file mode 100644
index 0000000..f688160
--- /dev/null
+++ b/arch/h8300/Makefile
@@ -0,0 +1,46 @@
+#
+# arch/h8300/Makefile
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License.  See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+# (C) Copyright 2002,2003 Yoshinori Sato <ysato@users.sourceforge.jp>
+#
+
+cflags-$(CONFIG_CPU_H8300H)	:= -mh
+aflags-$(CONFIG_CPU_H8300H)	:= -mh -Wa,--mach=h8300h
+ldflags-$(CONFIG_CPU_H8300H)	:= -mh8300helf_linux
+cflags-$(CONFIG_CPU_H8S)	:= -ms
+aflags-$(CONFIG_CPU_H8S)	:= -ms -Wa,--mach=h8300s
+ldflags-$(CONFIG_CPU_H8S)	:= -mh8300self_linux
+
+KBUILD_CFLAGS += $(cflags-y)
+KBUILD_CFLAGS += -mint32 -fno-builtin
+KBUILD_CFLAGS += -D__linux__
+KBUILD_CFLAGS += -DUTS_SYSNAME=\"uClinux\"
+KBUILD_AFLAGS += $(aflags-y)
+LDFLAGS += $(ldflags-y)
+
+CROSS_COMPILE := h8300-unknown-linux-
+LIBGCC := $(shell $(CROSS-COMPILE)$(CC) $(KBUILD_CFLAGS) -print-libgcc-file-name)
+
+core-y	+= arch/$(ARCH)/kernel/ arch/$(ARCH)/mm/
+
+libs-y	+= arch/$(ARCH)/lib/ $(LIBGCC)
+
+boot := arch/h8300/boot
+
+archmrproper:
+
+archclean:
+	$(Q)$(MAKE) $(clean)=$(boot)
+
+vmlinux.srec vmlinux.bin zImage uImage.bin: vmlinux
+	$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
+
+define archhelp
+  @echo  'vmlinux.bin  - Create raw binary'
+  @echo  'vmlinux.srec - Create srec binary'
+  @echo  'zImage       - Compressed kernel image'
+endef
-- 
2.1.3