From: Rusty Russell <rusty@rustcorp.com.au>
To: Jason Wang <jasowang@redhat.com>,
mst@redhat.com, virtualization@lists.linux-foundation.org,
netdev@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH net-next RFC] virtio-net: drop rq->max and rq->num
Date: Wed, 15 Jan 2014 14:11:23 +1030 [thread overview]
Message-ID: <87mwixx670.fsf@rustcorp.com.au> (raw)
In-Reply-To: <1388134685-30691-1-git-send-email-jasowang@redhat.com>
Jason Wang <jasowang@redhat.com> writes:
> It looks like there's no need for those two fields:
>
> - Unless there's a failure for the first refill try, rq->max should be always
> equal to the vring size.
> - rq->num is only used to determine the condition that we need to do the refill,
> we could check vq->num_free instead.
> - rq->num was required to be increased or decreased explicitly after each
> get/put which results a bad API.
>
> So this patch removes them both to make the code simpler.
Nice. These fields date from when the vq struct was opaque.
Applied,
Rusty.
> Cc: Rusty Russell <rusty@rustcorp.com.au>
> Cc: Michael S. Tsirkin <mst@redhat.com>
> Signed-off-by: Jason Wang <jasowang@redhat.com>
> ---
> drivers/net/virtio_net.c | 16 +++-------------
> 1 file changed, 3 insertions(+), 13 deletions(-)
>
> diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
> index c51a988..4e1bce3 100644
> --- a/drivers/net/virtio_net.c
> +++ b/drivers/net/virtio_net.c
> @@ -72,9 +72,6 @@ struct receive_queue {
>
> struct napi_struct napi;
>
> - /* Number of input buffers, and max we've ever had. */
> - unsigned int num, max;
> -
> /* Chain pages by the private ptr. */
> struct page *pages;
>
> @@ -360,7 +357,6 @@ static struct sk_buff *receive_mergeable(struct net_device *dev,
> }
>
> page = virt_to_head_page(buf);
> - --rq->num;
>
> num_skb_frags = skb_shinfo(curr_skb)->nr_frags;
> if (unlikely(num_skb_frags == MAX_SKB_FRAGS)) {
> @@ -406,7 +402,6 @@ err_skb:
> }
> page = virt_to_head_page(buf);
> put_page(page);
> - --rq->num;
> }
> err_buf:
> dev->stats.rx_dropped++;
> @@ -628,10 +623,7 @@ static bool try_fill_recv(struct receive_queue *rq, gfp_t gfp)
> oom = err == -ENOMEM;
> if (err)
> break;
> - ++rq->num;
> } while (rq->vq->num_free);
> - if (unlikely(rq->num > rq->max))
> - rq->max = rq->num;
> if (unlikely(!virtqueue_kick(rq->vq)))
> return false;
> return !oom;
> @@ -699,11 +691,10 @@ again:
> while (received < budget &&
> (buf = virtqueue_get_buf(rq->vq, &len)) != NULL) {
> receive_buf(rq, buf, len);
> - --rq->num;
> received++;
> }
>
> - if (rq->num < rq->max / 2) {
> + if (rq->vq->num_free > virtqueue_get_vring_size(rq->vq) / 2) {
> if (!try_fill_recv(rq, GFP_ATOMIC))
> schedule_delayed_work(&vi->refill, 0);
> }
> @@ -1398,9 +1389,7 @@ static void free_unused_bufs(struct virtnet_info *vi)
> give_pages(&vi->rq[i], buf);
> else
> dev_kfree_skb(buf);
> - --vi->rq[i].num;
> }
> - BUG_ON(vi->rq[i].num != 0);
> }
> }
>
> @@ -1671,7 +1660,8 @@ static int virtnet_probe(struct virtio_device *vdev)
> try_fill_recv(&vi->rq[i], GFP_KERNEL);
>
> /* If we didn't even get one input buffer, we're useless. */
> - if (vi->rq[i].num == 0) {
> + if (vi->rq[i].vq->num_free ==
> + virtqueue_get_vring_size(vi->rq[i].vq)) {
> free_unused_bufs(vi);
> err = -ENOMEM;
> goto free_recv_bufs;
> --
> 1.8.3.2
WARNING: multiple messages have this Message-ID (diff)
From: Rusty Russell <rusty@rustcorp.com.au>
To: Jason Wang <jasowang@redhat.com>,
mst@redhat.com, virtualization@lists.linux-foundation.org,
netdev@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Jason Wang <jasowang@redhat.com>
Subject: Re: [PATCH net-next RFC] virtio-net: drop rq->max and rq->num
Date: Wed, 15 Jan 2014 14:11:23 +1030 [thread overview]
Message-ID: <87mwixx670.fsf@rustcorp.com.au> (raw)
In-Reply-To: <1388134685-30691-1-git-send-email-jasowang@redhat.com>
Jason Wang <jasowang@redhat.com> writes:
> It looks like there's no need for those two fields:
>
> - Unless there's a failure for the first refill try, rq->max should be always
> equal to the vring size.
> - rq->num is only used to determine the condition that we need to do the refill,
> we could check vq->num_free instead.
> - rq->num was required to be increased or decreased explicitly after each
> get/put which results a bad API.
>
> So this patch removes them both to make the code simpler.
Nice. These fields date from when the vq struct was opaque.
Applied,
Rusty.
> Cc: Rusty Russell <rusty@rustcorp.com.au>
> Cc: Michael S. Tsirkin <mst@redhat.com>
> Signed-off-by: Jason Wang <jasowang@redhat.com>
> ---
> drivers/net/virtio_net.c | 16 +++-------------
> 1 file changed, 3 insertions(+), 13 deletions(-)
>
> diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
> index c51a988..4e1bce3 100644
> --- a/drivers/net/virtio_net.c
> +++ b/drivers/net/virtio_net.c
> @@ -72,9 +72,6 @@ struct receive_queue {
>
> struct napi_struct napi;
>
> - /* Number of input buffers, and max we've ever had. */
> - unsigned int num, max;
> -
> /* Chain pages by the private ptr. */
> struct page *pages;
>
> @@ -360,7 +357,6 @@ static struct sk_buff *receive_mergeable(struct net_device *dev,
> }
>
> page = virt_to_head_page(buf);
> - --rq->num;
>
> num_skb_frags = skb_shinfo(curr_skb)->nr_frags;
> if (unlikely(num_skb_frags == MAX_SKB_FRAGS)) {
> @@ -406,7 +402,6 @@ err_skb:
> }
> page = virt_to_head_page(buf);
> put_page(page);
> - --rq->num;
> }
> err_buf:
> dev->stats.rx_dropped++;
> @@ -628,10 +623,7 @@ static bool try_fill_recv(struct receive_queue *rq, gfp_t gfp)
> oom = err == -ENOMEM;
> if (err)
> break;
> - ++rq->num;
> } while (rq->vq->num_free);
> - if (unlikely(rq->num > rq->max))
> - rq->max = rq->num;
> if (unlikely(!virtqueue_kick(rq->vq)))
> return false;
> return !oom;
> @@ -699,11 +691,10 @@ again:
> while (received < budget &&
> (buf = virtqueue_get_buf(rq->vq, &len)) != NULL) {
> receive_buf(rq, buf, len);
> - --rq->num;
> received++;
> }
>
> - if (rq->num < rq->max / 2) {
> + if (rq->vq->num_free > virtqueue_get_vring_size(rq->vq) / 2) {
> if (!try_fill_recv(rq, GFP_ATOMIC))
> schedule_delayed_work(&vi->refill, 0);
> }
> @@ -1398,9 +1389,7 @@ static void free_unused_bufs(struct virtnet_info *vi)
> give_pages(&vi->rq[i], buf);
> else
> dev_kfree_skb(buf);
> - --vi->rq[i].num;
> }
> - BUG_ON(vi->rq[i].num != 0);
> }
> }
>
> @@ -1671,7 +1660,8 @@ static int virtnet_probe(struct virtio_device *vdev)
> try_fill_recv(&vi->rq[i], GFP_KERNEL);
>
> /* If we didn't even get one input buffer, we're useless. */
> - if (vi->rq[i].num == 0) {
> + if (vi->rq[i].vq->num_free ==
> + virtqueue_get_vring_size(vi->rq[i].vq)) {
> free_unused_bufs(vi);
> err = -ENOMEM;
> goto free_recv_bufs;
> --
> 1.8.3.2
next prev parent reply other threads:[~2014-01-15 3:41 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-12-27 8:58 [PATCH net-next RFC] virtio-net: drop rq->max and rq->num Jason Wang
2013-12-27 8:58 ` Jason Wang
2014-01-15 3:41 ` Rusty Russell [this message]
2014-01-15 3:41 ` Rusty Russell
2014-01-15 23:55 ` Rusty Russell
2014-01-15 23:55 ` Rusty Russell
2014-01-16 0:46 ` David Miller
2014-01-16 0:46 ` David Miller
2014-01-16 4:24 ` Jason Wang
2014-01-16 4:24 ` Jason Wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87mwixx670.fsf@rustcorp.com.au \
--to=rusty@rustcorp.com.au \
--cc=jasowang@redhat.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mst@redhat.com \
--cc=netdev@vger.kernel.org \
--cc=virtualization@lists.linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.