[PATCH 1/2] drm/i915: Wait upon the last request seqno, rather than a future seqno

[PATCH 1/2] drm/i915: Wait upon the last request seqno, rather than a future seqno

[Chris Wilson]

In commit 69c2fc891343cb5217c866d10709343cff190bdc
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date:   Fri Jul 20 12:41:03 2012 +0100

    drm/i915: Remove the per-ring write list

the explicit flush was removed from i915_ring_idle(). However, we
continued to wait upon the next seqno which now did not correspond to
any request (except for the unusual condition of a failure to queue a
request after execbuffer) and so would wait indefinitely.

This has an important side-effect that i915_gpu_idle() does not cause
the seqno to be incremented. This is vital if we are to be able to idle
the GPU to handle seqno wraparound, as in subsequent patches.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
---
 drivers/gpu/drm/i915/i915_gem.c |   23 +++++++++++++++++++++--
 1 file changed, 21 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index b0016bb..9be450e 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -2462,10 +2462,29 @@ i915_gem_object_unbind(struct drm_i915_gem_object *obj)
 
 static int i915_ring_idle(struct intel_ring_buffer *ring)
 {
-	if (list_empty(&ring->active_list))
+	u32 seqno;
+	int ret;
+
+	/* We need to add any requests required to flush the objects */
+	if (!list_empty(&ring->active_list)) {
+		seqno = list_entry(ring->active_list.prev,
+				   struct drm_i915_gem_object,
+				   ring_list)->last_read_seqno;
+
+		ret = i915_gem_check_olr(ring, seqno);
+		if (ret)
+			return ret;
+	}
+
+	/* Wait upon the last request to be completed */
+	if (list_empty(&ring->request_list))
 		return 0;
 
-	return i915_wait_seqno(ring, i915_gem_next_request_seqno(ring));
+	seqno = list_entry(ring->request_list.prev,
+			   struct drm_i915_gem_request,
+			   list)->seqno;
+
+	return i915_wait_seqno(ring, seqno);
 }
 
 int i915_gpu_idle(struct drm_device *dev)
-- 
1.7.10.4

[PATCH 2/2] drm/i915: Preallocate next seqno before touching the ring

[Chris Wilson]

Based on the work by Mika Kuoppala, we realised that we need to handle
seqno wraparound prior to committing our changes to the ring. The most
obvious point then is to grab the seqno inside intel_ring_begin(), and
then to reuse that seqno for all ring operations until the next request.
As intel_ring_begin() can fail, the callers must already be prepared to
handle such failure and so we can safely add further checks.

This patch looks like it should be split up into the interface
changes and the tweaks to move seqno wrapping from the execbuffer into
the core seqno increment. However, I found no easy way to break it into
incremental steps without introducing further broken behaviour.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=863861
---
 drivers/gpu/drm/i915/i915_drv.h            |    5 +-
 drivers/gpu/drm/i915/i915_gem.c            |   73 +++++++++++++++++++---------
 drivers/gpu/drm/i915/i915_gem_context.c    |    3 +-
 drivers/gpu/drm/i915/i915_gem_execbuffer.c |   30 +++---------
 drivers/gpu/drm/i915/intel_ringbuffer.c    |   48 +++++++++---------
 drivers/gpu/drm/i915/intel_ringbuffer.h    |   10 ++--
 6 files changed, 92 insertions(+), 77 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 87c06f9..e473e5d 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -1417,8 +1417,7 @@ int __must_check i915_mutex_lock_interruptible(struct drm_device *dev);
 int i915_gem_object_sync(struct drm_i915_gem_object *obj,
 			 struct intel_ring_buffer *to);
 void i915_gem_object_move_to_active(struct drm_i915_gem_object *obj,
-				    struct intel_ring_buffer *ring,
-				    u32 seqno);
+				    struct intel_ring_buffer *ring);
 
 int i915_gem_dumb_create(struct drm_file *file_priv,
 			 struct drm_device *dev,
@@ -1436,7 +1435,7 @@ i915_seqno_passed(uint32_t seq1, uint32_t seq2)
 	return (int32_t)(seq1 - seq2) >= 0;
 }
 
-u32 i915_gem_next_request_seqno(struct intel_ring_buffer *ring);
+extern int i915_gem_get_seqno(struct drm_device *dev, u32 *seqno);
 
 int __must_check i915_gem_object_get_fence(struct drm_i915_gem_object *obj);
 int __must_check i915_gem_object_put_fence(struct drm_i915_gem_object *obj);
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index 9be450e..8b9a356 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -1857,11 +1857,11 @@ i915_gem_object_get_pages(struct drm_i915_gem_object *obj)
 
 void
 i915_gem_object_move_to_active(struct drm_i915_gem_object *obj,
-			       struct intel_ring_buffer *ring,
-			       u32 seqno)
+			       struct intel_ring_buffer *ring)
 {
 	struct drm_device *dev = obj->base.dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
+	u32 seqno = intel_ring_get_seqno(ring);
 
 	BUG_ON(ring == NULL);
 	obj->ring = ring;
@@ -1922,26 +1922,58 @@ i915_gem_object_move_to_inactive(struct drm_i915_gem_object *obj)
 	WARN_ON(i915_verify_lists(dev));
 }
 
-static u32
-i915_gem_get_seqno(struct drm_device *dev)
+static int
+i915_gem_handle_seqno_wrap(struct drm_device *dev)
 {
-	drm_i915_private_t *dev_priv = dev->dev_private;
-	u32 seqno = dev_priv->next_seqno;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_ring_buffer *ring;
+	int ret, i, j;
 
-	/* reserve 0 for non-seqno */
-	if (++dev_priv->next_seqno == 0)
-		dev_priv->next_seqno = 1;
+	/* The hardware uses various monotonic 32-bit counters, if we
+	 * detect that they will wraparound we need to idle the GPU
+	 * and reset those counters.
+	 */
+
+	ret = 0;
+	for_each_ring(ring, dev_priv, i) {
+		for (j = 0; j < ARRAY_SIZE(ring->sync_seqno); j++) {
+			ret |= ring->sync_seqno[j] != 0;
+			break;
+		}
+	}
+	if (ret == 0)
+		return ret;
+
+	ret = i915_gpu_idle(dev);
+	if (ret)
+		return ret;
 
-	return seqno;
+	i915_gem_retire_requests(dev);
+
+	for_each_ring(ring, dev_priv, i) {
+		for (j = 0; j < ARRAY_SIZE(ring->sync_seqno); j++)
+			ring->sync_seqno[j] = 0;
+	}
+
+	return 0;
 }
 
-u32
-i915_gem_next_request_seqno(struct intel_ring_buffer *ring)
+int
+i915_gem_get_seqno(struct drm_device *dev, u32 *seqno)
 {
-	if (ring->outstanding_lazy_request == 0)
-		ring->outstanding_lazy_request = i915_gem_get_seqno(ring->dev);
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	/* reserve 0 for non-seqno */
+	if (dev_priv->next_seqno == 0) {
+		int ret = i915_gem_handle_seqno_wrap(dev);
+		if (ret)
+			return ret;
 
-	return ring->outstanding_lazy_request;
+		dev_priv->next_seqno = 1;
+	}
+
+	*seqno = dev_priv->next_seqno++;
+	return 0;
 }
 
 int
@@ -1952,7 +1984,6 @@ i915_add_request(struct intel_ring_buffer *ring,
 	drm_i915_private_t *dev_priv = ring->dev->dev_private;
 	struct drm_i915_gem_request *request;
 	u32 request_ring_position;
-	u32 seqno;
 	int was_empty;
 	int ret;
 
@@ -1971,7 +2002,6 @@ i915_add_request(struct intel_ring_buffer *ring,
 	if (request == NULL)
 		return -ENOMEM;
 
-	seqno = i915_gem_next_request_seqno(ring);
 
 	/* Record the position of the start of the request so that
 	 * should we detect the updated seqno part-way through the
@@ -1980,15 +2010,13 @@ i915_add_request(struct intel_ring_buffer *ring,
 	 */
 	request_ring_position = intel_ring_get_tail(ring);
 
-	ret = ring->add_request(ring, &seqno);
+	ret = ring->add_request(ring);
 	if (ret) {
 		kfree(request);
 		return ret;
 	}
 
-	trace_i915_gem_request_add(ring, seqno);
-
-	request->seqno = seqno;
+	request->seqno = intel_ring_get_seqno(ring);
 	request->ring = ring;
 	request->tail = request_ring_position;
 	request->emitted_jiffies = jiffies;
@@ -2006,6 +2034,7 @@ i915_add_request(struct intel_ring_buffer *ring,
 		spin_unlock(&file_priv->mm.lock);
 	}
 
+	trace_i915_gem_request_add(ring, request->seqno);
 	ring->outstanding_lazy_request = 0;
 
 	if (!dev_priv->mm.suspended) {
@@ -2022,7 +2051,7 @@ i915_add_request(struct intel_ring_buffer *ring,
 	}
 
 	if (out_seqno)
-		*out_seqno = seqno;
+		*out_seqno = request->seqno;
 	return 0;
 }
 
diff --git a/drivers/gpu/drm/i915/i915_gem_context.c b/drivers/gpu/drm/i915/i915_gem_context.c
index 0e510df..a3f06bc 100644
--- a/drivers/gpu/drm/i915/i915_gem_context.c
+++ b/drivers/gpu/drm/i915/i915_gem_context.c
@@ -410,9 +410,8 @@ static int do_switch(struct i915_hw_context *to)
 	 * MI_SET_CONTEXT instead of when the next seqno has completed.
 	 */
 	if (from_obj != NULL) {
-		u32 seqno = i915_gem_next_request_seqno(ring);
 		from_obj->base.read_domains = I915_GEM_DOMAIN_INSTRUCTION;
-		i915_gem_object_move_to_active(from_obj, ring, seqno);
+		i915_gem_object_move_to_active(from_obj, ring);
 		/* As long as MI_SET_CONTEXT is serializing, ie. it flushes the
 		 * whole damn pipeline, we don't need to explicitly mark the
 		 * object dirty. The only exception is that the context must be
diff --git a/drivers/gpu/drm/i915/i915_gem_execbuffer.c b/drivers/gpu/drm/i915/i915_gem_execbuffer.c
index 48e4317..f5620db 100644
--- a/drivers/gpu/drm/i915/i915_gem_execbuffer.c
+++ b/drivers/gpu/drm/i915/i915_gem_execbuffer.c
@@ -713,8 +713,7 @@ validate_exec_list(struct drm_i915_gem_exec_object2 *exec,
 
 static void
 i915_gem_execbuffer_move_to_active(struct list_head *objects,
-				   struct intel_ring_buffer *ring,
-				   u32 seqno)
+				   struct intel_ring_buffer *ring)
 {
 	struct drm_i915_gem_object *obj;
 
@@ -726,10 +725,10 @@ i915_gem_execbuffer_move_to_active(struct list_head *objects,
 		obj->base.write_domain = obj->base.pending_write_domain;
 		obj->fenced_gpu_access = obj->pending_fenced_gpu_access;
 
-		i915_gem_object_move_to_active(obj, ring, seqno);
+		i915_gem_object_move_to_active(obj, ring);
 		if (obj->base.write_domain) {
 			obj->dirty = 1;
-			obj->last_write_seqno = seqno;
+			obj->last_write_seqno = intel_ring_get_seqno(ring);
 			if (obj->pin_count) /* check for potential scanout */
 				intel_mark_fb_busy(obj);
 		}
@@ -789,7 +788,6 @@ i915_gem_do_execbuffer(struct drm_device *dev, void *data,
 	struct intel_ring_buffer *ring;
 	u32 ctx_id = i915_execbuffer2_get_context_id(*args);
 	u32 exec_start, exec_len;
-	u32 seqno;
 	u32 mask;
 	u32 flags;
 	int ret, mode, i;
@@ -994,22 +992,6 @@ i915_gem_do_execbuffer(struct drm_device *dev, void *data,
 	if (ret)
 		goto err;
 
-	seqno = i915_gem_next_request_seqno(ring);
-	for (i = 0; i < ARRAY_SIZE(ring->sync_seqno); i++) {
-		if (seqno < ring->sync_seqno[i]) {
-			/* The GPU can not handle its semaphore value wrapping,
-			 * so every billion or so execbuffers, we need to stall
-			 * the GPU in order to reset the counters.
-			 */
-			ret = i915_gpu_idle(dev);
-			if (ret)
-				goto err;
-			i915_gem_retire_requests(dev);
-
-			BUG_ON(ring->sync_seqno[i]);
-		}
-	}
-
 	ret = i915_switch_context(ring, file, ctx_id);
 	if (ret)
 		goto err;
@@ -1035,8 +1017,6 @@ i915_gem_do_execbuffer(struct drm_device *dev, void *data,
 			goto err;
 	}
 
-	trace_i915_gem_ring_dispatch(ring, seqno, flags);
-
 	exec_start = batch_obj->gtt_offset + args->batch_start_offset;
 	exec_len = args->batch_len;
 	if (cliprects) {
@@ -1060,7 +1040,9 @@ i915_gem_do_execbuffer(struct drm_device *dev, void *data,
 			goto err;
 	}
 
-	i915_gem_execbuffer_move_to_active(&objects, ring, seqno);
+	trace_i915_gem_ring_dispatch(ring, intel_ring_get_seqno(ring));
+
+	i915_gem_execbuffer_move_to_active(&objects, ring);
 	i915_gem_execbuffer_retire_commands(dev, file, ring);
 
 err:
diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.c b/drivers/gpu/drm/i915/intel_ringbuffer.c
index 987eb5f..e6dabb9 100644
--- a/drivers/gpu/drm/i915/intel_ringbuffer.c
+++ b/drivers/gpu/drm/i915/intel_ringbuffer.c
@@ -555,12 +555,11 @@ static void render_ring_cleanup(struct intel_ring_buffer *ring)
 
 static void
 update_mboxes(struct intel_ring_buffer *ring,
-	    u32 seqno,
-	    u32 mmio_offset)
+	      u32 mmio_offset)
 {
 	intel_ring_emit(ring, MI_LOAD_REGISTER_IMM(1));
 	intel_ring_emit(ring, mmio_offset);
-	intel_ring_emit(ring, seqno);
+	intel_ring_emit(ring, ring->outstanding_lazy_request);
 }
 
 /**
@@ -573,8 +572,7 @@ update_mboxes(struct intel_ring_buffer *ring,
  * This acts like a signal in the canonical semaphore.
  */
 static int
-gen6_add_request(struct intel_ring_buffer *ring,
-		 u32 *seqno)
+gen6_add_request(struct intel_ring_buffer *ring)
 {
 	u32 mbox1_reg;
 	u32 mbox2_reg;
@@ -587,13 +585,11 @@ gen6_add_request(struct intel_ring_buffer *ring,
 	mbox1_reg = ring->signal_mbox[0];
 	mbox2_reg = ring->signal_mbox[1];
 
-	*seqno = i915_gem_next_request_seqno(ring);
-
-	update_mboxes(ring, *seqno, mbox1_reg);
-	update_mboxes(ring, *seqno, mbox2_reg);
+	update_mboxes(ring, mbox1_reg);
+	update_mboxes(ring, mbox2_reg);
 	intel_ring_emit(ring, MI_STORE_DWORD_INDEX);
 	intel_ring_emit(ring, I915_GEM_HWS_INDEX << MI_STORE_DWORD_INDEX_SHIFT);
-	intel_ring_emit(ring, *seqno);
+	intel_ring_emit(ring, ring->outstanding_lazy_request);
 	intel_ring_emit(ring, MI_USER_INTERRUPT);
 	intel_ring_advance(ring);
 
@@ -650,10 +646,8 @@ do {									\
 } while (0)
 
 static int
-pc_render_add_request(struct intel_ring_buffer *ring,
-		      u32 *result)
+pc_render_add_request(struct intel_ring_buffer *ring)
 {
-	u32 seqno = i915_gem_next_request_seqno(ring);
 	struct pipe_control *pc = ring->private;
 	u32 scratch_addr = pc->gtt_offset + 128;
 	int ret;
@@ -674,7 +668,7 @@ pc_render_add_request(struct intel_ring_buffer *ring,
 			PIPE_CONTROL_WRITE_FLUSH |
 			PIPE_CONTROL_TEXTURE_CACHE_INVALIDATE);
 	intel_ring_emit(ring, pc->gtt_offset | PIPE_CONTROL_GLOBAL_GTT);
-	intel_ring_emit(ring, seqno);
+	intel_ring_emit(ring, ring->outstanding_lazy_request);
 	intel_ring_emit(ring, 0);
 	PIPE_CONTROL_FLUSH(ring, scratch_addr);
 	scratch_addr += 128; /* write to separate cachelines */
@@ -693,11 +687,10 @@ pc_render_add_request(struct intel_ring_buffer *ring,
 			PIPE_CONTROL_TEXTURE_CACHE_INVALIDATE |
 			PIPE_CONTROL_NOTIFY);
 	intel_ring_emit(ring, pc->gtt_offset | PIPE_CONTROL_GLOBAL_GTT);
-	intel_ring_emit(ring, seqno);
+	intel_ring_emit(ring, ring->outstanding_lazy_request);
 	intel_ring_emit(ring, 0);
 	intel_ring_advance(ring);
 
-	*result = seqno;
 	return 0;
 }
 
@@ -885,25 +878,20 @@ bsd_ring_flush(struct intel_ring_buffer *ring,
 }
 
 static int
-i9xx_add_request(struct intel_ring_buffer *ring,
-		 u32 *result)
+i9xx_add_request(struct intel_ring_buffer *ring)
 {
-	u32 seqno;
 	int ret;
 
 	ret = intel_ring_begin(ring, 4);
 	if (ret)
 		return ret;
 
-	seqno = i915_gem_next_request_seqno(ring);
-
 	intel_ring_emit(ring, MI_STORE_DWORD_INDEX);
 	intel_ring_emit(ring, I915_GEM_HWS_INDEX << MI_STORE_DWORD_INDEX_SHIFT);
-	intel_ring_emit(ring, seqno);
+	intel_ring_emit(ring, ring->outstanding_lazy_request);
 	intel_ring_emit(ring, MI_USER_INTERRUPT);
 	intel_ring_advance(ring);
 
-	*result = seqno;
 	return 0;
 }
 
@@ -1338,6 +1326,15 @@ int intel_wait_ring_buffer(struct intel_ring_buffer *ring, int n)
 	return -EBUSY;
 }
 
+static int
+intel_ring_alloc_seqno(struct intel_ring_buffer *ring)
+{
+	if (ring->outstanding_lazy_request)
+		return 0;
+
+	return i915_gem_get_seqno(ring->dev, &ring->outstanding_lazy_request);
+}
+
 int intel_ring_begin(struct intel_ring_buffer *ring,
 		     int num_dwords)
 {
@@ -1349,6 +1346,11 @@ int intel_ring_begin(struct intel_ring_buffer *ring,
 	if (ret)
 		return ret;
 
+	/* Preallocate the olr before touching the ring */
+	ret = intel_ring_alloc_seqno(ring);
+	if (ret)
+		return ret;
+
 	if (unlikely(ring->tail + n > ring->effective_size)) {
 		ret = intel_wrap_ring_buffer(ring);
 		if (unlikely(ret))
diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.h b/drivers/gpu/drm/i915/intel_ringbuffer.h
index 5af65b8..0e61302 100644
--- a/drivers/gpu/drm/i915/intel_ringbuffer.h
+++ b/drivers/gpu/drm/i915/intel_ringbuffer.h
@@ -70,8 +70,7 @@ struct  intel_ring_buffer {
 	int __must_check (*flush)(struct intel_ring_buffer *ring,
 				  u32	invalidate_domains,
 				  u32	flush_domains);
-	int		(*add_request)(struct intel_ring_buffer *ring,
-				       u32 *seqno);
+	int		(*add_request)(struct intel_ring_buffer *ring);
 	/* Some chipsets are not quite as coherent as advertised and need
 	 * an expensive kick to force a true read of the up-to-date seqno.
 	 * However, the up-to-date seqno is not always required and the last
@@ -205,7 +204,6 @@ static inline void intel_ring_emit(struct intel_ring_buffer *ring,
 
 void intel_ring_advance(struct intel_ring_buffer *ring);
 
-u32 intel_ring_get_seqno(struct intel_ring_buffer *ring);
 int intel_ring_flush_all_caches(struct intel_ring_buffer *ring);
 int intel_ring_invalidate_all_caches(struct intel_ring_buffer *ring);
 
@@ -221,6 +219,12 @@ static inline u32 intel_ring_get_tail(struct intel_ring_buffer *ring)
 	return ring->tail;
 }
 
+static inline u32 intel_ring_get_seqno(struct intel_ring_buffer *ring)
+{
+	BUG_ON(ring->outstanding_lazy_request == 0);
+	return ring->outstanding_lazy_request;
+}
+
 static inline void i915_trace_irq_get(struct intel_ring_buffer *ring, u32 seqno)
 {
 	if (ring->trace_irq_seqno == 0 && ring->irq_get(ring))
-- 
1.7.10.4

Re: [PATCH 2/2] drm/i915: Preallocate next seqno before touching the ring

[Mika Kuoppala]

On Thu, 22 Nov 2012 13:07:21 +0000, Chris Wilson <chris@chris-wilson.co.uk> wrote:
> Based on the work by Mika Kuoppala, we realised that we need to handle
> seqno wraparound prior to committing our changes to the ring. The most
> obvious point then is to grab the seqno inside intel_ring_begin(), and
> then to reuse that seqno for all ring operations until the next request.
> As intel_ring_begin() can fail, the callers must already be prepared to
> handle such failure and so we can safely add further checks.
> 
> This patch looks like it should be split up into the interface
> changes and the tweaks to move seqno wrapping from the execbuffer into
> the core seqno increment. However, I found no easy way to break it into
> incremental steps without introducing further broken behaviour.
> 
> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
> Cc: Mika Kuoppala <mika.kuoppala@intel.com>
> Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=863861
> ---
>  drivers/gpu/drm/i915/i915_drv.h            |    5 +-
>  drivers/gpu/drm/i915/i915_gem.c            |   73 +++++++++++++++++++---------
>  drivers/gpu/drm/i915/i915_gem_context.c    |    3 +-
>  drivers/gpu/drm/i915/i915_gem_execbuffer.c |   30 +++---------
>  drivers/gpu/drm/i915/intel_ringbuffer.c    |   48 +++++++++---------
>  drivers/gpu/drm/i915/intel_ringbuffer.h    |   10 ++--
>  6 files changed, 92 insertions(+), 77 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
> index 87c06f9..e473e5d 100644
> --- a/drivers/gpu/drm/i915/i915_drv.h
> +++ b/drivers/gpu/drm/i915/i915_drv.h
> @@ -1417,8 +1417,7 @@ int __must_check i915_mutex_lock_interruptible(struct drm_device *dev);
>  int i915_gem_object_sync(struct drm_i915_gem_object *obj,
>  			 struct intel_ring_buffer *to);
>  void i915_gem_object_move_to_active(struct drm_i915_gem_object *obj,
> -				    struct intel_ring_buffer *ring,
> -				    u32 seqno);
> +				    struct intel_ring_buffer *ring);
>  
>  int i915_gem_dumb_create(struct drm_file *file_priv,
>  			 struct drm_device *dev,
> @@ -1436,7 +1435,7 @@ i915_seqno_passed(uint32_t seq1, uint32_t seq2)
>  	return (int32_t)(seq1 - seq2) >= 0;
>  }
>  
> -u32 i915_gem_next_request_seqno(struct intel_ring_buffer *ring);
> +extern int i915_gem_get_seqno(struct drm_device *dev, u32 *seqno);
>  
>  int __must_check i915_gem_object_get_fence(struct drm_i915_gem_object *obj);
>  int __must_check i915_gem_object_put_fence(struct drm_i915_gem_object *obj);
> diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
> index 9be450e..8b9a356 100644
> --- a/drivers/gpu/drm/i915/i915_gem.c
> +++ b/drivers/gpu/drm/i915/i915_gem.c
> @@ -1857,11 +1857,11 @@ i915_gem_object_get_pages(struct drm_i915_gem_object *obj)
>  
>  void
>  i915_gem_object_move_to_active(struct drm_i915_gem_object *obj,
> -			       struct intel_ring_buffer *ring,
> -			       u32 seqno)
> +			       struct intel_ring_buffer *ring)
>  {
>  	struct drm_device *dev = obj->base.dev;
>  	struct drm_i915_private *dev_priv = dev->dev_private;
> +	u32 seqno = intel_ring_get_seqno(ring);
>  
>  	BUG_ON(ring == NULL);
>  	obj->ring = ring;
> @@ -1922,26 +1922,58 @@ i915_gem_object_move_to_inactive(struct drm_i915_gem_object *obj)
>  	WARN_ON(i915_verify_lists(dev));
>  }
>  
> -static u32
> -i915_gem_get_seqno(struct drm_device *dev)
> +static int
> +i915_gem_handle_seqno_wrap(struct drm_device *dev)
>  {
> -	drm_i915_private_t *dev_priv = dev->dev_private;
> -	u32 seqno = dev_priv->next_seqno;
> +	struct drm_i915_private *dev_priv = dev->dev_private;
> +	struct intel_ring_buffer *ring;
> +	int ret, i, j;
>  
> -	/* reserve 0 for non-seqno */
> -	if (++dev_priv->next_seqno == 0)
> -		dev_priv->next_seqno = 1;
> +	/* The hardware uses various monotonic 32-bit counters, if we
> +	 * detect that they will wraparound we need to idle the GPU
> +	 * and reset those counters.
> +	 */
> +
> +	ret = 0;
> +	for_each_ring(ring, dev_priv, i) {
> +		for (j = 0; j < ARRAY_SIZE(ring->sync_seqno); j++) {
> +			ret |= ring->sync_seqno[j] != 0;
> +			break;
> +		}
> +	}

If we don't sync (using hw semaphores) across wrap boundary, we 
dont need to retire requests if we wrap? 

Nevertheless, that break there still seems highly suspicious.

> +	if (ret == 0)
> +		return ret;
> +
> +	ret = i915_gpu_idle(dev);
> +	if (ret)
> +		return ret;
>  
> -	return seqno;
> +	i915_gem_retire_requests(dev);
> +
> +	for_each_ring(ring, dev_priv, i) {
> +		for (j = 0; j < ARRAY_SIZE(ring->sync_seqno); j++)
> +			ring->sync_seqno[j] = 0;
> +	}

i915_gem_retire_requests_ring should set syn_seqnos to 0.
Why not BUG_ON(ring->sync_seqno[j]) instead?

No remarks on rest of the patch.

-Mika

> +	return 0;
>  }
>  
> -u32
> -i915_gem_next_request_seqno(struct intel_ring_buffer *ring)
> +int
> +i915_gem_get_seqno(struct drm_device *dev, u32 *seqno)
>  {
> -	if (ring->outstanding_lazy_request == 0)
> -		ring->outstanding_lazy_request = i915_gem_get_seqno(ring->dev);
> +	struct drm_i915_private *dev_priv = dev->dev_private;
> +
> +	/* reserve 0 for non-seqno */
> +	if (dev_priv->next_seqno == 0) {
> +		int ret = i915_gem_handle_seqno_wrap(dev);
> +		if (ret)
> +			return ret;
>  
> -	return ring->outstanding_lazy_request;
> +		dev_priv->next_seqno = 1;
> +	}
> +
> +	*seqno = dev_priv->next_seqno++;
> +	return 0;
>  }
>  
>  int
> @@ -1952,7 +1984,6 @@ i915_add_request(struct intel_ring_buffer *ring,
>  	drm_i915_private_t *dev_priv = ring->dev->dev_private;
>  	struct drm_i915_gem_request *request;
>  	u32 request_ring_position;
> -	u32 seqno;
>  	int was_empty;
>  	int ret;
>  
> @@ -1971,7 +2002,6 @@ i915_add_request(struct intel_ring_buffer *ring,
>  	if (request == NULL)
>  		return -ENOMEM;
>  
> -	seqno = i915_gem_next_request_seqno(ring);
>  
>  	/* Record the position of the start of the request so that
>  	 * should we detect the updated seqno part-way through the
> @@ -1980,15 +2010,13 @@ i915_add_request(struct intel_ring_buffer *ring,
>  	 */
>  	request_ring_position = intel_ring_get_tail(ring);
>  
> -	ret = ring->add_request(ring, &seqno);
> +	ret = ring->add_request(ring);
>  	if (ret) {
>  		kfree(request);
>  		return ret;
>  	}
>  
> -	trace_i915_gem_request_add(ring, seqno);
> -
> -	request->seqno = seqno;
> +	request->seqno = intel_ring_get_seqno(ring);
>  	request->ring = ring;
>  	request->tail = request_ring_position;
>  	request->emitted_jiffies = jiffies;
> @@ -2006,6 +2034,7 @@ i915_add_request(struct intel_ring_buffer *ring,
>  		spin_unlock(&file_priv->mm.lock);
>  	}
>  
> +	trace_i915_gem_request_add(ring, request->seqno);
>  	ring->outstanding_lazy_request = 0;
>  
>  	if (!dev_priv->mm.suspended) {
> @@ -2022,7 +2051,7 @@ i915_add_request(struct intel_ring_buffer *ring,
>  	}
>  
>  	if (out_seqno)
> -		*out_seqno = seqno;
> +		*out_seqno = request->seqno;
>  	return 0;
>  }
>  
> diff --git a/drivers/gpu/drm/i915/i915_gem_context.c b/drivers/gpu/drm/i915/i915_gem_context.c
> index 0e510df..a3f06bc 100644
> --- a/drivers/gpu/drm/i915/i915_gem_context.c
> +++ b/drivers/gpu/drm/i915/i915_gem_context.c
> @@ -410,9 +410,8 @@ static int do_switch(struct i915_hw_context *to)
>  	 * MI_SET_CONTEXT instead of when the next seqno has completed.
>  	 */
>  	if (from_obj != NULL) {
> -		u32 seqno = i915_gem_next_request_seqno(ring);
>  		from_obj->base.read_domains = I915_GEM_DOMAIN_INSTRUCTION;
> -		i915_gem_object_move_to_active(from_obj, ring, seqno);
> +		i915_gem_object_move_to_active(from_obj, ring);
>  		/* As long as MI_SET_CONTEXT is serializing, ie. it flushes the
>  		 * whole damn pipeline, we don't need to explicitly mark the
>  		 * object dirty. The only exception is that the context must be
> diff --git a/drivers/gpu/drm/i915/i915_gem_execbuffer.c b/drivers/gpu/drm/i915/i915_gem_execbuffer.c
> index 48e4317..f5620db 100644
> --- a/drivers/gpu/drm/i915/i915_gem_execbuffer.c
> +++ b/drivers/gpu/drm/i915/i915_gem_execbuffer.c
> @@ -713,8 +713,7 @@ validate_exec_list(struct drm_i915_gem_exec_object2 *exec,
>  
>  static void
>  i915_gem_execbuffer_move_to_active(struct list_head *objects,
> -				   struct intel_ring_buffer *ring,
> -				   u32 seqno)
> +				   struct intel_ring_buffer *ring)
>  {
>  	struct drm_i915_gem_object *obj;
>  
> @@ -726,10 +725,10 @@ i915_gem_execbuffer_move_to_active(struct list_head *objects,
>  		obj->base.write_domain = obj->base.pending_write_domain;
>  		obj->fenced_gpu_access = obj->pending_fenced_gpu_access;
>  
> -		i915_gem_object_move_to_active(obj, ring, seqno);
> +		i915_gem_object_move_to_active(obj, ring);
>  		if (obj->base.write_domain) {
>  			obj->dirty = 1;
> -			obj->last_write_seqno = seqno;
> +			obj->last_write_seqno = intel_ring_get_seqno(ring);
>  			if (obj->pin_count) /* check for potential scanout */
>  				intel_mark_fb_busy(obj);
>  		}
> @@ -789,7 +788,6 @@ i915_gem_do_execbuffer(struct drm_device *dev, void *data,
>  	struct intel_ring_buffer *ring;
>  	u32 ctx_id = i915_execbuffer2_get_context_id(*args);
>  	u32 exec_start, exec_len;
> -	u32 seqno;
>  	u32 mask;
>  	u32 flags;
>  	int ret, mode, i;
> @@ -994,22 +992,6 @@ i915_gem_do_execbuffer(struct drm_device *dev, void *data,
>  	if (ret)
>  		goto err;
>  
> -	seqno = i915_gem_next_request_seqno(ring);
> -	for (i = 0; i < ARRAY_SIZE(ring->sync_seqno); i++) {
> -		if (seqno < ring->sync_seqno[i]) {
> -			/* The GPU can not handle its semaphore value wrapping,
> -			 * so every billion or so execbuffers, we need to stall
> -			 * the GPU in order to reset the counters.
> -			 */
> -			ret = i915_gpu_idle(dev);
> -			if (ret)
> -				goto err;
> -			i915_gem_retire_requests(dev);
> -
> -			BUG_ON(ring->sync_seqno[i]);
> -		}
> -	}
> -
>  	ret = i915_switch_context(ring, file, ctx_id);
>  	if (ret)
>  		goto err;
> @@ -1035,8 +1017,6 @@ i915_gem_do_execbuffer(struct drm_device *dev, void *data,
>  			goto err;
>  	}
>  
> -	trace_i915_gem_ring_dispatch(ring, seqno, flags);
> -
>  	exec_start = batch_obj->gtt_offset + args->batch_start_offset;
>  	exec_len = args->batch_len;
>  	if (cliprects) {
> @@ -1060,7 +1040,9 @@ i915_gem_do_execbuffer(struct drm_device *dev, void *data,
>  			goto err;
>  	}
>  
> -	i915_gem_execbuffer_move_to_active(&objects, ring, seqno);
> +	trace_i915_gem_ring_dispatch(ring, intel_ring_get_seqno(ring));
> +
> +	i915_gem_execbuffer_move_to_active(&objects, ring);
>  	i915_gem_execbuffer_retire_commands(dev, file, ring);
>  
>  err:
> diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.c b/drivers/gpu/drm/i915/intel_ringbuffer.c
> index 987eb5f..e6dabb9 100644
> --- a/drivers/gpu/drm/i915/intel_ringbuffer.c
> +++ b/drivers/gpu/drm/i915/intel_ringbuffer.c
> @@ -555,12 +555,11 @@ static void render_ring_cleanup(struct intel_ring_buffer *ring)
>  
>  static void
>  update_mboxes(struct intel_ring_buffer *ring,
> -	    u32 seqno,
> -	    u32 mmio_offset)
> +	      u32 mmio_offset)
>  {
>  	intel_ring_emit(ring, MI_LOAD_REGISTER_IMM(1));
>  	intel_ring_emit(ring, mmio_offset);
> -	intel_ring_emit(ring, seqno);
> +	intel_ring_emit(ring, ring->outstanding_lazy_request);
>  }
>  
>  /**
> @@ -573,8 +572,7 @@ update_mboxes(struct intel_ring_buffer *ring,
>   * This acts like a signal in the canonical semaphore.
>   */
>  static int
> -gen6_add_request(struct intel_ring_buffer *ring,
> -		 u32 *seqno)
> +gen6_add_request(struct intel_ring_buffer *ring)
>  {
>  	u32 mbox1_reg;
>  	u32 mbox2_reg;
> @@ -587,13 +585,11 @@ gen6_add_request(struct intel_ring_buffer *ring,
>  	mbox1_reg = ring->signal_mbox[0];
>  	mbox2_reg = ring->signal_mbox[1];
>  
> -	*seqno = i915_gem_next_request_seqno(ring);
> -
> -	update_mboxes(ring, *seqno, mbox1_reg);
> -	update_mboxes(ring, *seqno, mbox2_reg);
> +	update_mboxes(ring, mbox1_reg);
> +	update_mboxes(ring, mbox2_reg);
>  	intel_ring_emit(ring, MI_STORE_DWORD_INDEX);
>  	intel_ring_emit(ring, I915_GEM_HWS_INDEX << MI_STORE_DWORD_INDEX_SHIFT);
> -	intel_ring_emit(ring, *seqno);
> +	intel_ring_emit(ring, ring->outstanding_lazy_request);
>  	intel_ring_emit(ring, MI_USER_INTERRUPT);
>  	intel_ring_advance(ring);
>  
> @@ -650,10 +646,8 @@ do {									\
>  } while (0)
>  
>  static int
> -pc_render_add_request(struct intel_ring_buffer *ring,
> -		      u32 *result)
> +pc_render_add_request(struct intel_ring_buffer *ring)
>  {
> -	u32 seqno = i915_gem_next_request_seqno(ring);
>  	struct pipe_control *pc = ring->private;
>  	u32 scratch_addr = pc->gtt_offset + 128;
>  	int ret;
> @@ -674,7 +668,7 @@ pc_render_add_request(struct intel_ring_buffer *ring,
>  			PIPE_CONTROL_WRITE_FLUSH |
>  			PIPE_CONTROL_TEXTURE_CACHE_INVALIDATE);
>  	intel_ring_emit(ring, pc->gtt_offset | PIPE_CONTROL_GLOBAL_GTT);
> -	intel_ring_emit(ring, seqno);
> +	intel_ring_emit(ring, ring->outstanding_lazy_request);
>  	intel_ring_emit(ring, 0);
>  	PIPE_CONTROL_FLUSH(ring, scratch_addr);
>  	scratch_addr += 128; /* write to separate cachelines */
> @@ -693,11 +687,10 @@ pc_render_add_request(struct intel_ring_buffer *ring,
>  			PIPE_CONTROL_TEXTURE_CACHE_INVALIDATE |
>  			PIPE_CONTROL_NOTIFY);
>  	intel_ring_emit(ring, pc->gtt_offset | PIPE_CONTROL_GLOBAL_GTT);
> -	intel_ring_emit(ring, seqno);
> +	intel_ring_emit(ring, ring->outstanding_lazy_request);
>  	intel_ring_emit(ring, 0);
>  	intel_ring_advance(ring);
>  
> -	*result = seqno;
>  	return 0;
>  }
>  
> @@ -885,25 +878,20 @@ bsd_ring_flush(struct intel_ring_buffer *ring,
>  }
>  
>  static int
> -i9xx_add_request(struct intel_ring_buffer *ring,
> -		 u32 *result)
> +i9xx_add_request(struct intel_ring_buffer *ring)
>  {
> -	u32 seqno;
>  	int ret;
>  
>  	ret = intel_ring_begin(ring, 4);
>  	if (ret)
>  		return ret;
>  
> -	seqno = i915_gem_next_request_seqno(ring);
> -
>  	intel_ring_emit(ring, MI_STORE_DWORD_INDEX);
>  	intel_ring_emit(ring, I915_GEM_HWS_INDEX << MI_STORE_DWORD_INDEX_SHIFT);
> -	intel_ring_emit(ring, seqno);
> +	intel_ring_emit(ring, ring->outstanding_lazy_request);
>  	intel_ring_emit(ring, MI_USER_INTERRUPT);
>  	intel_ring_advance(ring);
>  
> -	*result = seqno;
>  	return 0;
>  }
>  
> @@ -1338,6 +1326,15 @@ int intel_wait_ring_buffer(struct intel_ring_buffer *ring, int n)
>  	return -EBUSY;
>  }
>  
> +static int
> +intel_ring_alloc_seqno(struct intel_ring_buffer *ring)
> +{
> +	if (ring->outstanding_lazy_request)
> +		return 0;
> +
> +	return i915_gem_get_seqno(ring->dev, &ring->outstanding_lazy_request);
> +}
> +
>  int intel_ring_begin(struct intel_ring_buffer *ring,
>  		     int num_dwords)
>  {
> @@ -1349,6 +1346,11 @@ int intel_ring_begin(struct intel_ring_buffer *ring,
>  	if (ret)
>  		return ret;
>  
> +	/* Preallocate the olr before touching the ring */
> +	ret = intel_ring_alloc_seqno(ring);
> +	if (ret)
> +		return ret;
> +
>  	if (unlikely(ring->tail + n > ring->effective_size)) {
>  		ret = intel_wrap_ring_buffer(ring);
>  		if (unlikely(ret))
> diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.h b/drivers/gpu/drm/i915/intel_ringbuffer.h
> index 5af65b8..0e61302 100644
> --- a/drivers/gpu/drm/i915/intel_ringbuffer.h
> +++ b/drivers/gpu/drm/i915/intel_ringbuffer.h
> @@ -70,8 +70,7 @@ struct  intel_ring_buffer {
>  	int __must_check (*flush)(struct intel_ring_buffer *ring,
>  				  u32	invalidate_domains,
>  				  u32	flush_domains);
> -	int		(*add_request)(struct intel_ring_buffer *ring,
> -				       u32 *seqno);
> +	int		(*add_request)(struct intel_ring_buffer *ring);
>  	/* Some chipsets are not quite as coherent as advertised and need
>  	 * an expensive kick to force a true read of the up-to-date seqno.
>  	 * However, the up-to-date seqno is not always required and the last
> @@ -205,7 +204,6 @@ static inline void intel_ring_emit(struct intel_ring_buffer *ring,
>  
>  void intel_ring_advance(struct intel_ring_buffer *ring);
>  
> -u32 intel_ring_get_seqno(struct intel_ring_buffer *ring);
>  int intel_ring_flush_all_caches(struct intel_ring_buffer *ring);
>  int intel_ring_invalidate_all_caches(struct intel_ring_buffer *ring);
>  
> @@ -221,6 +219,12 @@ static inline u32 intel_ring_get_tail(struct intel_ring_buffer *ring)
>  	return ring->tail;
>  }
>  
> +static inline u32 intel_ring_get_seqno(struct intel_ring_buffer *ring)
> +{
> +	BUG_ON(ring->outstanding_lazy_request == 0);
> +	return ring->outstanding_lazy_request;
> +}
> +
>  static inline void i915_trace_irq_get(struct intel_ring_buffer *ring, u32 seqno)
>  {
>  	if (ring->trace_irq_seqno == 0 && ring->irq_get(ring))
> -- 
> 1.7.10.4
> 
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx

Re: [PATCH 2/2] drm/i915: Preallocate next seqno before touching the ring

[Chris Wilson]

On Tue, 27 Nov 2012 11:03:20 +0200, Mika Kuoppala <mika.kuoppala@linux.intel.com> wrote:
> On Thu, 22 Nov 2012 13:07:21 +0000, Chris Wilson <chris@chris-wilson.co.uk> wrote:
> > Based on the work by Mika Kuoppala, we realised that we need to handle
> > seqno wraparound prior to committing our changes to the ring. The most
> > obvious point then is to grab the seqno inside intel_ring_begin(), and
> > then to reuse that seqno for all ring operations until the next request.
> > As intel_ring_begin() can fail, the callers must already be prepared to
> > handle such failure and so we can safely add further checks.
> > 
> > This patch looks like it should be split up into the interface
> > changes and the tweaks to move seqno wrapping from the execbuffer into
> > the core seqno increment. However, I found no easy way to break it into
> > incremental steps without introducing further broken behaviour.
> > 
> > Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
> > Cc: Mika Kuoppala <mika.kuoppala@intel.com>
> > Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=863861
> > ---
> >  drivers/gpu/drm/i915/i915_drv.h            |    5 +-
> >  drivers/gpu/drm/i915/i915_gem.c            |   73 +++++++++++++++++++---------
> >  drivers/gpu/drm/i915/i915_gem_context.c    |    3 +-
> >  drivers/gpu/drm/i915/i915_gem_execbuffer.c |   30 +++---------
> >  drivers/gpu/drm/i915/intel_ringbuffer.c    |   48 +++++++++---------
> >  drivers/gpu/drm/i915/intel_ringbuffer.h    |   10 ++--
> >  6 files changed, 92 insertions(+), 77 deletions(-)
> > 
> > diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
> > index 87c06f9..e473e5d 100644
> > --- a/drivers/gpu/drm/i915/i915_drv.h
> > +++ b/drivers/gpu/drm/i915/i915_drv.h
> > @@ -1417,8 +1417,7 @@ int __must_check i915_mutex_lock_interruptible(struct drm_device *dev);
> >  int i915_gem_object_sync(struct drm_i915_gem_object *obj,
> >  			 struct intel_ring_buffer *to);
> >  void i915_gem_object_move_to_active(struct drm_i915_gem_object *obj,
> > -				    struct intel_ring_buffer *ring,
> > -				    u32 seqno);
> > +				    struct intel_ring_buffer *ring);
> >  
> >  int i915_gem_dumb_create(struct drm_file *file_priv,
> >  			 struct drm_device *dev,
> > @@ -1436,7 +1435,7 @@ i915_seqno_passed(uint32_t seq1, uint32_t seq2)
> >  	return (int32_t)(seq1 - seq2) >= 0;
> >  }
> >  
> > -u32 i915_gem_next_request_seqno(struct intel_ring_buffer *ring);
> > +extern int i915_gem_get_seqno(struct drm_device *dev, u32 *seqno);
> >  
> >  int __must_check i915_gem_object_get_fence(struct drm_i915_gem_object *obj);
> >  int __must_check i915_gem_object_put_fence(struct drm_i915_gem_object *obj);
> > diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
> > index 9be450e..8b9a356 100644
> > --- a/drivers/gpu/drm/i915/i915_gem.c
> > +++ b/drivers/gpu/drm/i915/i915_gem.c
> > @@ -1857,11 +1857,11 @@ i915_gem_object_get_pages(struct drm_i915_gem_object *obj)
> >  
> >  void
> >  i915_gem_object_move_to_active(struct drm_i915_gem_object *obj,
> > -			       struct intel_ring_buffer *ring,
> > -			       u32 seqno)
> > +			       struct intel_ring_buffer *ring)
> >  {
> >  	struct drm_device *dev = obj->base.dev;
> >  	struct drm_i915_private *dev_priv = dev->dev_private;
> > +	u32 seqno = intel_ring_get_seqno(ring);
> >  
> >  	BUG_ON(ring == NULL);
> >  	obj->ring = ring;
> > @@ -1922,26 +1922,58 @@ i915_gem_object_move_to_inactive(struct drm_i915_gem_object *obj)
> >  	WARN_ON(i915_verify_lists(dev));
> >  }
> >  
> > -static u32
> > -i915_gem_get_seqno(struct drm_device *dev)
> > +static int
> > +i915_gem_handle_seqno_wrap(struct drm_device *dev)
> >  {
> > -	drm_i915_private_t *dev_priv = dev->dev_private;
> > -	u32 seqno = dev_priv->next_seqno;
> > +	struct drm_i915_private *dev_priv = dev->dev_private;
> > +	struct intel_ring_buffer *ring;
> > +	int ret, i, j;
> >  
> > -	/* reserve 0 for non-seqno */
> > -	if (++dev_priv->next_seqno == 0)
> > -		dev_priv->next_seqno = 1;
> > +	/* The hardware uses various monotonic 32-bit counters, if we
> > +	 * detect that they will wraparound we need to idle the GPU
> > +	 * and reset those counters.
> > +	 */
> > +
> > +	ret = 0;
> > +	for_each_ring(ring, dev_priv, i) {
> > +		for (j = 0; j < ARRAY_SIZE(ring->sync_seqno); j++) {
> > +			ret |= ring->sync_seqno[j] != 0;
> > +			break;
> > +		}
> > +	}
> 
> If we don't sync (using hw semaphores) across wrap boundary, we 
> dont need to retire requests if we wrap? 

Correct, at the moment we only need to worry about hw semaphores.
 
> Nevertheless, that break there still seems highly suspicious.
Brainfart, thanks.
> 
> > +	if (ret == 0)
> > +		return ret;
> > +
> > +	ret = i915_gpu_idle(dev);
> > +	if (ret)
> > +		return ret;
> >  
> > -	return seqno;
> > +	i915_gem_retire_requests(dev);
> > +
> > +	for_each_ring(ring, dev_priv, i) {
> > +		for (j = 0; j < ARRAY_SIZE(ring->sync_seqno); j++)
> > +			ring->sync_seqno[j] = 0;
> > +	}
> 
> i915_gem_retire_requests_ring should set syn_seqnos to 0.
> Why not BUG_ON(ring->sync_seqno[j]) instead?

Oh boy, because i915_gem_retire_requests_ring() is buggy.
-Chris

-- 
Chris Wilson, Intel Open Source Technology Centre

[PATCH] drm/i915: Preallocate next seqno before touching the ring

[Chris Wilson]

Based on the work by Mika Kuoppala, we realised that we need to handle
seqno wraparound prior to committing our changes to the ring. The most
obvious point then is to grab the seqno inside intel_ring_begin(), and
then to reuse that seqno for all ring operations until the next request.
As intel_ring_begin() can fail, the callers must already be prepared to
handle such failure and so we can safely add further checks.

This patch looks like it should be split up into the interface
changes and the tweaks to move seqno wrapping from the execbuffer into
the core seqno increment. However, I found no easy way to break it into
incremental steps without introducing further broken behaviour.

v2: Mika found a silly mistake and a subtle error in the existing code;
inside i915_gem_retire_requests() we were resetting the sync_seqno of
the target ring based on the seqno from this ring - which are only
related by the order of their allocation, not retirement. Hence we were
applying the optimisation that the rings were synchronised too early,
fortunately the only real casualty there is the handling of seqno
wrapping.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=863861
---
 drivers/gpu/drm/i915/i915_drv.h            |    5 +-
 drivers/gpu/drm/i915/i915_gem.c            |   74 ++++++++++++++++++----------
 drivers/gpu/drm/i915/i915_gem_context.c    |    3 +-
 drivers/gpu/drm/i915/i915_gem_execbuffer.c |   30 +++--------
 drivers/gpu/drm/i915/intel_ringbuffer.c    |   48 +++++++++---------
 drivers/gpu/drm/i915/intel_ringbuffer.h    |   10 ++--
 6 files changed, 88 insertions(+), 82 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 87c06f9..e473e5d 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -1417,8 +1417,7 @@ int __must_check i915_mutex_lock_interruptible(struct drm_device *dev);
 int i915_gem_object_sync(struct drm_i915_gem_object *obj,
 			 struct intel_ring_buffer *to);
 void i915_gem_object_move_to_active(struct drm_i915_gem_object *obj,
-				    struct intel_ring_buffer *ring,
-				    u32 seqno);
+				    struct intel_ring_buffer *ring);
 
 int i915_gem_dumb_create(struct drm_file *file_priv,
 			 struct drm_device *dev,
@@ -1436,7 +1435,7 @@ i915_seqno_passed(uint32_t seq1, uint32_t seq2)
 	return (int32_t)(seq1 - seq2) >= 0;
 }
 
-u32 i915_gem_next_request_seqno(struct intel_ring_buffer *ring);
+extern int i915_gem_get_seqno(struct drm_device *dev, u32 *seqno);
 
 int __must_check i915_gem_object_get_fence(struct drm_i915_gem_object *obj);
 int __must_check i915_gem_object_put_fence(struct drm_i915_gem_object *obj);
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index 9be450e..3b9b250 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -1857,11 +1857,11 @@ i915_gem_object_get_pages(struct drm_i915_gem_object *obj)
 
 void
 i915_gem_object_move_to_active(struct drm_i915_gem_object *obj,
-			       struct intel_ring_buffer *ring,
-			       u32 seqno)
+			       struct intel_ring_buffer *ring)
 {
 	struct drm_device *dev = obj->base.dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
+	u32 seqno = intel_ring_get_seqno(ring);
 
 	BUG_ON(ring == NULL);
 	obj->ring = ring;
@@ -1922,26 +1922,54 @@ i915_gem_object_move_to_inactive(struct drm_i915_gem_object *obj)
 	WARN_ON(i915_verify_lists(dev));
 }
 
-static u32
-i915_gem_get_seqno(struct drm_device *dev)
+static int
+i915_gem_handle_seqno_wrap(struct drm_device *dev)
 {
-	drm_i915_private_t *dev_priv = dev->dev_private;
-	u32 seqno = dev_priv->next_seqno;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_ring_buffer *ring;
+	int ret, i, j;
 
-	/* reserve 0 for non-seqno */
-	if (++dev_priv->next_seqno == 0)
-		dev_priv->next_seqno = 1;
+	/* The hardware uses various monotonic 32-bit counters, if we
+	 * detect that they will wraparound we need to idle the GPU
+	 * and reset those counters.
+	 */
+	ret = 0;
+	for_each_ring(ring, dev_priv, i) {
+		for (j = 0; j < ARRAY_SIZE(ring->sync_seqno); j++)
+			ret |= ring->sync_seqno[j] != 0;
+	}
+	if (ret == 0)
+		return ret;
 
-	return seqno;
+	ret = i915_gpu_idle(dev);
+	if (ret)
+		return ret;
+
+	i915_gem_retire_requests(dev);
+	for_each_ring(ring, dev_priv, i) {
+		for (j = 0; j < ARRAY_SIZE(ring->sync_seqno); j++)
+			ring->sync_seqno[j] = 0;
+	}
+
+	return 0;
 }
 
-u32
-i915_gem_next_request_seqno(struct intel_ring_buffer *ring)
+int
+i915_gem_get_seqno(struct drm_device *dev, u32 *seqno)
 {
-	if (ring->outstanding_lazy_request == 0)
-		ring->outstanding_lazy_request = i915_gem_get_seqno(ring->dev);
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	/* reserve 0 for non-seqno */
+	if (dev_priv->next_seqno == 0) {
+		int ret = i915_gem_handle_seqno_wrap(dev);
+		if (ret)
+			return ret;
 
-	return ring->outstanding_lazy_request;
+		dev_priv->next_seqno = 1;
+	}
+
+	*seqno = dev_priv->next_seqno++;
+	return 0;
 }
 
 int
@@ -1952,7 +1980,6 @@ i915_add_request(struct intel_ring_buffer *ring,
 	drm_i915_private_t *dev_priv = ring->dev->dev_private;
 	struct drm_i915_gem_request *request;
 	u32 request_ring_position;
-	u32 seqno;
 	int was_empty;
 	int ret;
 
@@ -1971,7 +1998,6 @@ i915_add_request(struct intel_ring_buffer *ring,
 	if (request == NULL)
 		return -ENOMEM;
 
-	seqno = i915_gem_next_request_seqno(ring);
 
 	/* Record the position of the start of the request so that
 	 * should we detect the updated seqno part-way through the
@@ -1980,15 +2006,13 @@ i915_add_request(struct intel_ring_buffer *ring,
 	 */
 	request_ring_position = intel_ring_get_tail(ring);
 
-	ret = ring->add_request(ring, &seqno);
+	ret = ring->add_request(ring);
 	if (ret) {
 		kfree(request);
 		return ret;
 	}
 
-	trace_i915_gem_request_add(ring, seqno);
-
-	request->seqno = seqno;
+	request->seqno = intel_ring_get_seqno(ring);
 	request->ring = ring;
 	request->tail = request_ring_position;
 	request->emitted_jiffies = jiffies;
@@ -2006,6 +2030,7 @@ i915_add_request(struct intel_ring_buffer *ring,
 		spin_unlock(&file_priv->mm.lock);
 	}
 
+	trace_i915_gem_request_add(ring, request->seqno);
 	ring->outstanding_lazy_request = 0;
 
 	if (!dev_priv->mm.suspended) {
@@ -2022,7 +2047,7 @@ i915_add_request(struct intel_ring_buffer *ring,
 	}
 
 	if (out_seqno)
-		*out_seqno = seqno;
+		*out_seqno = request->seqno;
 	return 0;
 }
 
@@ -2120,7 +2145,6 @@ void
 i915_gem_retire_requests_ring(struct intel_ring_buffer *ring)
 {
 	uint32_t seqno;
-	int i;
 
 	if (list_empty(&ring->request_list))
 		return;
@@ -2129,10 +2153,6 @@ i915_gem_retire_requests_ring(struct intel_ring_buffer *ring)
 
 	seqno = ring->get_seqno(ring, true);
 
-	for (i = 0; i < ARRAY_SIZE(ring->sync_seqno); i++)
-		if (seqno >= ring->sync_seqno[i])
-			ring->sync_seqno[i] = 0;
-
 	while (!list_empty(&ring->request_list)) {
 		struct drm_i915_gem_request *request;
 
diff --git a/drivers/gpu/drm/i915/i915_gem_context.c b/drivers/gpu/drm/i915/i915_gem_context.c
index 0e510df..a3f06bc 100644
--- a/drivers/gpu/drm/i915/i915_gem_context.c
+++ b/drivers/gpu/drm/i915/i915_gem_context.c
@@ -410,9 +410,8 @@ static int do_switch(struct i915_hw_context *to)
 	 * MI_SET_CONTEXT instead of when the next seqno has completed.
 	 */
 	if (from_obj != NULL) {
-		u32 seqno = i915_gem_next_request_seqno(ring);
 		from_obj->base.read_domains = I915_GEM_DOMAIN_INSTRUCTION;
-		i915_gem_object_move_to_active(from_obj, ring, seqno);
+		i915_gem_object_move_to_active(from_obj, ring);
 		/* As long as MI_SET_CONTEXT is serializing, ie. it flushes the
 		 * whole damn pipeline, we don't need to explicitly mark the
 		 * object dirty. The only exception is that the context must be
diff --git a/drivers/gpu/drm/i915/i915_gem_execbuffer.c b/drivers/gpu/drm/i915/i915_gem_execbuffer.c
index 48e4317..ee8f97f 100644
--- a/drivers/gpu/drm/i915/i915_gem_execbuffer.c
+++ b/drivers/gpu/drm/i915/i915_gem_execbuffer.c
@@ -713,8 +713,7 @@ validate_exec_list(struct drm_i915_gem_exec_object2 *exec,
 
 static void
 i915_gem_execbuffer_move_to_active(struct list_head *objects,
-				   struct intel_ring_buffer *ring,
-				   u32 seqno)
+				   struct intel_ring_buffer *ring)
 {
 	struct drm_i915_gem_object *obj;
 
@@ -726,10 +725,10 @@ i915_gem_execbuffer_move_to_active(struct list_head *objects,
 		obj->base.write_domain = obj->base.pending_write_domain;
 		obj->fenced_gpu_access = obj->pending_fenced_gpu_access;
 
-		i915_gem_object_move_to_active(obj, ring, seqno);
+		i915_gem_object_move_to_active(obj, ring);
 		if (obj->base.write_domain) {
 			obj->dirty = 1;
-			obj->last_write_seqno = seqno;
+			obj->last_write_seqno = intel_ring_get_seqno(ring);
 			if (obj->pin_count) /* check for potential scanout */
 				intel_mark_fb_busy(obj);
 		}
@@ -789,7 +788,6 @@ i915_gem_do_execbuffer(struct drm_device *dev, void *data,
 	struct intel_ring_buffer *ring;
 	u32 ctx_id = i915_execbuffer2_get_context_id(*args);
 	u32 exec_start, exec_len;
-	u32 seqno;
 	u32 mask;
 	u32 flags;
 	int ret, mode, i;
@@ -994,22 +992,6 @@ i915_gem_do_execbuffer(struct drm_device *dev, void *data,
 	if (ret)
 		goto err;
 
-	seqno = i915_gem_next_request_seqno(ring);
-	for (i = 0; i < ARRAY_SIZE(ring->sync_seqno); i++) {
-		if (seqno < ring->sync_seqno[i]) {
-			/* The GPU can not handle its semaphore value wrapping,
-			 * so every billion or so execbuffers, we need to stall
-			 * the GPU in order to reset the counters.
-			 */
-			ret = i915_gpu_idle(dev);
-			if (ret)
-				goto err;
-			i915_gem_retire_requests(dev);
-
-			BUG_ON(ring->sync_seqno[i]);
-		}
-	}
-
 	ret = i915_switch_context(ring, file, ctx_id);
 	if (ret)
 		goto err;
@@ -1035,8 +1017,6 @@ i915_gem_do_execbuffer(struct drm_device *dev, void *data,
 			goto err;
 	}
 
-	trace_i915_gem_ring_dispatch(ring, seqno, flags);
-
 	exec_start = batch_obj->gtt_offset + args->batch_start_offset;
 	exec_len = args->batch_len;
 	if (cliprects) {
@@ -1060,7 +1040,9 @@ i915_gem_do_execbuffer(struct drm_device *dev, void *data,
 			goto err;
 	}
 
-	i915_gem_execbuffer_move_to_active(&objects, ring, seqno);
+	trace_i915_gem_ring_dispatch(ring, intel_ring_get_seqno(ring), flags);
+
+	i915_gem_execbuffer_move_to_active(&objects, ring);
 	i915_gem_execbuffer_retire_commands(dev, file, ring);
 
 err:
diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.c b/drivers/gpu/drm/i915/intel_ringbuffer.c
index 987eb5f..e6dabb9 100644
--- a/drivers/gpu/drm/i915/intel_ringbuffer.c
+++ b/drivers/gpu/drm/i915/intel_ringbuffer.c
@@ -555,12 +555,11 @@ static void render_ring_cleanup(struct intel_ring_buffer *ring)
 
 static void
 update_mboxes(struct intel_ring_buffer *ring,
-	    u32 seqno,
-	    u32 mmio_offset)
+	      u32 mmio_offset)
 {
 	intel_ring_emit(ring, MI_LOAD_REGISTER_IMM(1));
 	intel_ring_emit(ring, mmio_offset);
-	intel_ring_emit(ring, seqno);
+	intel_ring_emit(ring, ring->outstanding_lazy_request);
 }
 
 /**
@@ -573,8 +572,7 @@ update_mboxes(struct intel_ring_buffer *ring,
  * This acts like a signal in the canonical semaphore.
  */
 static int
-gen6_add_request(struct intel_ring_buffer *ring,
-		 u32 *seqno)
+gen6_add_request(struct intel_ring_buffer *ring)
 {
 	u32 mbox1_reg;
 	u32 mbox2_reg;
@@ -587,13 +585,11 @@ gen6_add_request(struct intel_ring_buffer *ring,
 	mbox1_reg = ring->signal_mbox[0];
 	mbox2_reg = ring->signal_mbox[1];
 
-	*seqno = i915_gem_next_request_seqno(ring);
-
-	update_mboxes(ring, *seqno, mbox1_reg);
-	update_mboxes(ring, *seqno, mbox2_reg);
+	update_mboxes(ring, mbox1_reg);
+	update_mboxes(ring, mbox2_reg);
 	intel_ring_emit(ring, MI_STORE_DWORD_INDEX);
 	intel_ring_emit(ring, I915_GEM_HWS_INDEX << MI_STORE_DWORD_INDEX_SHIFT);
-	intel_ring_emit(ring, *seqno);
+	intel_ring_emit(ring, ring->outstanding_lazy_request);
 	intel_ring_emit(ring, MI_USER_INTERRUPT);
 	intel_ring_advance(ring);
 
@@ -650,10 +646,8 @@ do {									\
 } while (0)
 
 static int
-pc_render_add_request(struct intel_ring_buffer *ring,
-		      u32 *result)
+pc_render_add_request(struct intel_ring_buffer *ring)
 {
-	u32 seqno = i915_gem_next_request_seqno(ring);
 	struct pipe_control *pc = ring->private;
 	u32 scratch_addr = pc->gtt_offset + 128;
 	int ret;
@@ -674,7 +668,7 @@ pc_render_add_request(struct intel_ring_buffer *ring,
 			PIPE_CONTROL_WRITE_FLUSH |
 			PIPE_CONTROL_TEXTURE_CACHE_INVALIDATE);
 	intel_ring_emit(ring, pc->gtt_offset | PIPE_CONTROL_GLOBAL_GTT);
-	intel_ring_emit(ring, seqno);
+	intel_ring_emit(ring, ring->outstanding_lazy_request);
 	intel_ring_emit(ring, 0);
 	PIPE_CONTROL_FLUSH(ring, scratch_addr);
 	scratch_addr += 128; /* write to separate cachelines */
@@ -693,11 +687,10 @@ pc_render_add_request(struct intel_ring_buffer *ring,
 			PIPE_CONTROL_TEXTURE_CACHE_INVALIDATE |
 			PIPE_CONTROL_NOTIFY);
 	intel_ring_emit(ring, pc->gtt_offset | PIPE_CONTROL_GLOBAL_GTT);
-	intel_ring_emit(ring, seqno);
+	intel_ring_emit(ring, ring->outstanding_lazy_request);
 	intel_ring_emit(ring, 0);
 	intel_ring_advance(ring);
 
-	*result = seqno;
 	return 0;
 }
 
@@ -885,25 +878,20 @@ bsd_ring_flush(struct intel_ring_buffer *ring,
 }
 
 static int
-i9xx_add_request(struct intel_ring_buffer *ring,
-		 u32 *result)
+i9xx_add_request(struct intel_ring_buffer *ring)
 {
-	u32 seqno;
 	int ret;
 
 	ret = intel_ring_begin(ring, 4);
 	if (ret)
 		return ret;
 
-	seqno = i915_gem_next_request_seqno(ring);
-
 	intel_ring_emit(ring, MI_STORE_DWORD_INDEX);
 	intel_ring_emit(ring, I915_GEM_HWS_INDEX << MI_STORE_DWORD_INDEX_SHIFT);
-	intel_ring_emit(ring, seqno);
+	intel_ring_emit(ring, ring->outstanding_lazy_request);
 	intel_ring_emit(ring, MI_USER_INTERRUPT);
 	intel_ring_advance(ring);
 
-	*result = seqno;
 	return 0;
 }
 
@@ -1338,6 +1326,15 @@ int intel_wait_ring_buffer(struct intel_ring_buffer *ring, int n)
 	return -EBUSY;
 }
 
+static int
+intel_ring_alloc_seqno(struct intel_ring_buffer *ring)
+{
+	if (ring->outstanding_lazy_request)
+		return 0;
+
+	return i915_gem_get_seqno(ring->dev, &ring->outstanding_lazy_request);
+}
+
 int intel_ring_begin(struct intel_ring_buffer *ring,
 		     int num_dwords)
 {
@@ -1349,6 +1346,11 @@ int intel_ring_begin(struct intel_ring_buffer *ring,
 	if (ret)
 		return ret;
 
+	/* Preallocate the olr before touching the ring */
+	ret = intel_ring_alloc_seqno(ring);
+	if (ret)
+		return ret;
+
 	if (unlikely(ring->tail + n > ring->effective_size)) {
 		ret = intel_wrap_ring_buffer(ring);
 		if (unlikely(ret))
diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.h b/drivers/gpu/drm/i915/intel_ringbuffer.h
index 5af65b8..0e61302 100644
--- a/drivers/gpu/drm/i915/intel_ringbuffer.h
+++ b/drivers/gpu/drm/i915/intel_ringbuffer.h
@@ -70,8 +70,7 @@ struct  intel_ring_buffer {
 	int __must_check (*flush)(struct intel_ring_buffer *ring,
 				  u32	invalidate_domains,
 				  u32	flush_domains);
-	int		(*add_request)(struct intel_ring_buffer *ring,
-				       u32 *seqno);
+	int		(*add_request)(struct intel_ring_buffer *ring);
 	/* Some chipsets are not quite as coherent as advertised and need
 	 * an expensive kick to force a true read of the up-to-date seqno.
 	 * However, the up-to-date seqno is not always required and the last
@@ -205,7 +204,6 @@ static inline void intel_ring_emit(struct intel_ring_buffer *ring,
 
 void intel_ring_advance(struct intel_ring_buffer *ring);
 
-u32 intel_ring_get_seqno(struct intel_ring_buffer *ring);
 int intel_ring_flush_all_caches(struct intel_ring_buffer *ring);
 int intel_ring_invalidate_all_caches(struct intel_ring_buffer *ring);
 
@@ -221,6 +219,12 @@ static inline u32 intel_ring_get_tail(struct intel_ring_buffer *ring)
 	return ring->tail;
 }
 
+static inline u32 intel_ring_get_seqno(struct intel_ring_buffer *ring)
+{
+	BUG_ON(ring->outstanding_lazy_request == 0);
+	return ring->outstanding_lazy_request;
+}
+
 static inline void i915_trace_irq_get(struct intel_ring_buffer *ring, u32 seqno)
 {
 	if (ring->trace_irq_seqno == 0 && ring->irq_get(ring))
-- 
1.7.10.4

Re: [PATCH] drm/i915: Preallocate next seqno before touching the ring

[Mika Kuoppala]

On Tue, 27 Nov 2012 09:48:50 +0000, Chris Wilson <chris@chris-wilson.co.uk> wrote:
> Based on the work by Mika Kuoppala, we realised that we need to handle
> seqno wraparound prior to committing our changes to the ring. The most
> obvious point then is to grab the seqno inside intel_ring_begin(), and
> then to reuse that seqno for all ring operations until the next request.
> As intel_ring_begin() can fail, the callers must already be prepared to
> handle such failure and so we can safely add further checks.
> 
> This patch looks like it should be split up into the interface
> changes and the tweaks to move seqno wrapping from the execbuffer into
> the core seqno increment. However, I found no easy way to break it into
> incremental steps without introducing further broken behaviour.
> 
> v2: Mika found a silly mistake and a subtle error in the existing code;
> inside i915_gem_retire_requests() we were resetting the sync_seqno of
> the target ring based on the seqno from this ring - which are only
> related by the order of their allocation, not retirement. Hence we were
> applying the optimisation that the rings were synchronised too early,
> fortunately the only real casualty there is the handling of seqno
> wrapping.
> 
> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
> Cc: Mika Kuoppala <mika.kuoppala@intel.com>
> Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=863861

Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>

Re: [PATCH 1/2] drm/i915: Wait upon the last request seqno, rather than a future seqno

[Mika Kuoppala]

On Thu, 22 Nov 2012 13:07:20 +0000, Chris Wilson <chris@chris-wilson.co.uk> wrote:
> In commit 69c2fc891343cb5217c866d10709343cff190bdc
> Author: Chris Wilson <chris@chris-wilson.co.uk>
> Date:   Fri Jul 20 12:41:03 2012 +0100
> 
>     drm/i915: Remove the per-ring write list
> 
> the explicit flush was removed from i915_ring_idle(). However, we
> continued to wait upon the next seqno which now did not correspond to
> any request (except for the unusual condition of a failure to queue a
> request after execbuffer) and so would wait indefinitely.
> 
> This has an important side-effect that i915_gpu_idle() does not cause
> the seqno to be incremented. This is vital if we are to be able to idle
> the GPU to handle seqno wraparound, as in subsequent patches.
> 
> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
> ---
>  drivers/gpu/drm/i915/i915_gem.c |   23 +++++++++++++++++++++--
>  1 file changed, 21 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
> index b0016bb..9be450e 100644
> --- a/drivers/gpu/drm/i915/i915_gem.c
> +++ b/drivers/gpu/drm/i915/i915_gem.c
> @@ -2462,10 +2462,29 @@ i915_gem_object_unbind(struct drm_i915_gem_object *obj)
>  
>  static int i915_ring_idle(struct intel_ring_buffer *ring)
>  {
> -	if (list_empty(&ring->active_list))
> +	u32 seqno;
> +	int ret;
> +
> +	/* We need to add any requests required to flush the objects */
> +	if (!list_empty(&ring->active_list)) {
> +		seqno = list_entry(ring->active_list.prev,
> +				   struct drm_i915_gem_object,
> +				   ring_list)->last_read_seqno;
> +
> +		ret = i915_gem_check_olr(ring, seqno);
> +		if (ret)
> +			return ret;
> +	}
> +
> +	/* Wait upon the last request to be completed */
> +	if (list_empty(&ring->request_list))
>  		return 0;
>  
> -	return i915_wait_seqno(ring, i915_gem_next_request_seqno(ring));
> +	seqno = list_entry(ring->request_list.prev,
> +			   struct drm_i915_gem_request,
> +			   list)->seqno;
> +
> +	return i915_wait_seqno(ring, seqno);
>  }
>  
>  int i915_gpu_idle(struct drm_device *dev)
> -- 
> 1.7.10.4

Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>

Re: [PATCH 1/2] drm/i915: Wait upon the last request seqno, rather than a future seqno

[Daniel Vetter]

On Tue, Nov 27, 2012 at 10:40:51AM +0200, Mika Kuoppala wrote:
> On Thu, 22 Nov 2012 13:07:20 +0000, Chris Wilson <chris@chris-wilson.co.uk> wrote:
> > In commit 69c2fc891343cb5217c866d10709343cff190bdc
> > Author: Chris Wilson <chris@chris-wilson.co.uk>
> > Date:   Fri Jul 20 12:41:03 2012 +0100
> > 
> >     drm/i915: Remove the per-ring write list
> > 
> > the explicit flush was removed from i915_ring_idle(). However, we
> > continued to wait upon the next seqno which now did not correspond to
> > any request (except for the unusual condition of a failure to queue a
> > request after execbuffer) and so would wait indefinitely.
> > 
> > This has an important side-effect that i915_gpu_idle() does not cause
> > the seqno to be incremented. This is vital if we are to be able to idle
> > the GPU to handle seqno wraparound, as in subsequent patches.
> > 
> > Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
> > ---
> >  drivers/gpu/drm/i915/i915_gem.c |   23 +++++++++++++++++++++--
> >  1 file changed, 21 insertions(+), 2 deletions(-)
> > 
> > diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
> > index b0016bb..9be450e 100644
> > --- a/drivers/gpu/drm/i915/i915_gem.c
> > +++ b/drivers/gpu/drm/i915/i915_gem.c
> > @@ -2462,10 +2462,29 @@ i915_gem_object_unbind(struct drm_i915_gem_object *obj)
> >  
> >  static int i915_ring_idle(struct intel_ring_buffer *ring)
> >  {
> > -	if (list_empty(&ring->active_list))
> > +	u32 seqno;
> > +	int ret;
> > +
> > +	/* We need to add any requests required to flush the objects */
> > +	if (!list_empty(&ring->active_list)) {
> > +		seqno = list_entry(ring->active_list.prev,
> > +				   struct drm_i915_gem_object,
> > +				   ring_list)->last_read_seqno;
> > +
> > +		ret = i915_gem_check_olr(ring, seqno);
> > +		if (ret)
> > +			return ret;
> > +	}
> > +
> > +	/* Wait upon the last request to be completed */
> > +	if (list_empty(&ring->request_list))
> >  		return 0;
> >  
> > -	return i915_wait_seqno(ring, i915_gem_next_request_seqno(ring));
> > +	seqno = list_entry(ring->request_list.prev,
> > +			   struct drm_i915_gem_request,
> > +			   list)->seqno;
> > +
> > +	return i915_wait_seqno(ring, seqno);
> >  }
> >  
> >  int i915_gpu_idle(struct drm_device *dev)
> > -- 
> > 1.7.10.4
> 
> Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Queued for -next, thanks for the patch. I'll wait for v2 on patch 2 ...
-Daniel
-- 
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch