* [PATCH v2 0/7] Input: elantech: add support for newer hardware
@ 2011-08-24 5:44 ` JJ Ding
0 siblings, 0 replies; 14+ messages in thread
From: JJ Ding @ 2011-08-24 5:44 UTC (permalink / raw)
To: linux-input, linux-kernel
Cc: Seth Forshee, Dmitry Torokhov, Aaron Huang, Tom Lin,
Éric Piel, Daniel Kurtz, Chase Douglas, Henrik Rydberg,
Alessandro Rubini, JJ Ding
Hi Lists,
This is a series of patches to add support for newer generation of ELAN
touchpad.
Patches #1~#6 are essentially fixes and cleanups that pave the way for
patch #7, which really adds code for v3 hardware.
Any comments, suggestoins are welcome.
Thank you.
Changes since v1:
- drop EC workaround patch.
- add patch #2, make ST and MT have the same range, as Dmitry suggested.
- add patch #4, remove ETP_EDGE_FUZZ_V2, as Éric suggested.
- rename all packet checking functions so they are consistent.
- some code cleanup, and don't report ABS_[XY] when fingers == 0, as Seth suggested.
- add document for v3 debounce, and now check debounce in elantech_packet_check_v3.
JJ Ding (7):
Input: elantech - correct x, y value range for v2 hardware
Input: elantech - get rid of ETP_2FT_XXXX in elantech.h
Input: elantech - use firmware provided x, y ranges
Input: elantech - remove ETP_EDGE_FUZZ_V2
Input: elantech - packet checking for v2 hardware
Input: elantech - clean up elantech_init
Input: elantech - add v3 hardware support
Documentation/input/elantech.txt | 125 +++++++++++--
drivers/input/mouse/elantech.c | 387 +++++++++++++++++++++++++++++++-------
drivers/input/mouse/elantech.h | 35 ++--
3 files changed, 444 insertions(+), 103 deletions(-)
--
1.7.4.1
^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH v2 1/7] Input: elantech - correct x, y value range for v2 hardware
2011-08-24 5:44 ` JJ Ding
(?)
@ 2011-08-24 5:44 ` JJ Ding
-1 siblings, 0 replies; 14+ messages in thread
From: JJ Ding @ 2011-08-24 5:44 UTC (permalink / raw)
To: linux-input, linux-kernel
Cc: Seth Forshee, Dmitry Torokhov, Aaron Huang, Tom Lin,
Éric Piel, Daniel Kurtz, Chase Douglas, Henrik Rydberg,
Alessandro Rubini, JJ Ding
x, y values are actually 12-bit long. Also update protocol document to reflect
the change.
Signed-off-by: JJ Ding <jj_ding@emc.com.tw>
---
Documentation/input/elantech.txt | 8 ++++----
drivers/input/mouse/elantech.c | 8 ++++----
2 files changed, 8 insertions(+), 8 deletions(-)
diff --git a/Documentation/input/elantech.txt b/Documentation/input/elantech.txt
index db798af..bce9941 100644
--- a/Documentation/input/elantech.txt
+++ b/Documentation/input/elantech.txt
@@ -389,14 +389,14 @@ byte 0:
byte 1:
bit 7 6 5 4 3 2 1 0
- p7 p6 p5 p4 . x10 x9 x8
+ p7 p6 p5 p4 x11 x10 x9 x8
byte 2:
bit 7 6 5 4 3 2 1 0
x7 x6 x5 x4 x3 x2 x1 x0
- x10..x0 = absolute x value (horizontal)
+ x11..x0 = absolute x value (horizontal)
byte 3:
@@ -420,7 +420,7 @@ byte 3:
byte 4:
bit 7 6 5 4 3 2 1 0
- p3 p1 p2 p0 . . y9 y8
+ p3 p1 p2 p0 y11 y10 y9 y8
p7..p0 = pressure (not EF113)
@@ -429,7 +429,7 @@ byte 5:
bit 7 6 5 4 3 2 1 0
y7 y6 y5 y4 y3 y2 y1 y0
- y9..y0 = absolute y value (vertical)
+ y11..y0 = absolute y value (vertical)
4.2.2 Two finger touch
diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c
index 3250356..da161da 100644
--- a/drivers/input/mouse/elantech.c
+++ b/drivers/input/mouse/elantech.c
@@ -290,15 +290,15 @@ static void elantech_report_absolute_v2(struct psmouse *psmouse)
/* pass through... */
case 1:
/*
- * byte 1: . . . . . x10 x9 x8
+ * byte 1: . . . . x11 x10 x9 x8
* byte 2: x7 x6 x5 x4 x4 x2 x1 x0
*/
- x1 = ((packet[1] & 0x07) << 8) | packet[2];
+ x1 = ((packet[1] & 0x0f) << 8) | packet[2];
/*
- * byte 4: . . . . . . y9 y8
+ * byte 4: . . . . y11 y10 y9 y8
* byte 5: y7 y6 y5 y4 y3 y2 y1 y0
*/
- y1 = ETP_YMAX_V2 - (((packet[4] & 0x03) << 8) | packet[5]);
+ y1 = ETP_YMAX_V2 - (((packet[4] & 0x0f) << 8) | packet[5]);
input_report_abs(dev, ABS_X, x1);
input_report_abs(dev, ABS_Y, y1);
--
1.7.4.1
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCH v2 2/7] Input: elantech - get rid of ETP_2FT_* in elantech.h
2011-08-24 5:44 ` JJ Ding
(?)
(?)
@ 2011-08-24 5:44 ` JJ Ding
-1 siblings, 0 replies; 14+ messages in thread
From: JJ Ding @ 2011-08-24 5:44 UTC (permalink / raw)
To: linux-input, linux-kernel
Cc: Seth Forshee, Dmitry Torokhov, Aaron Huang, Tom Lin,
Éric Piel, Daniel Kurtz, Chase Douglas, Henrik Rydberg,
Alessandro Rubini, JJ Ding
For two finger touches the coordinate of each finger gets reported
separately but with reduced resolution.
With this change, we now have the same range for ST and MT data and
scale MT data because it has lower resolution to match ST.
Suggested-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: JJ Ding <jj_ding@emc.com.tw>
---
drivers/input/mouse/elantech.c | 28 +++++++++++++---------------
drivers/input/mouse/elantech.h | 11 -----------
2 files changed, 13 insertions(+), 26 deletions(-)
diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c
index da161da..cd8e2e5 100644
--- a/drivers/input/mouse/elantech.c
+++ b/drivers/input/mouse/elantech.c
@@ -273,11 +273,11 @@ static void elantech_report_absolute_v2(struct psmouse *psmouse)
struct elantech_data *etd = psmouse->private;
struct input_dev *dev = psmouse->dev;
unsigned char *packet = psmouse->packet;
- unsigned int fingers, x1 = 0, y1 = 0, x2 = 0, y2 = 0, width = 0, pres = 0;
+ unsigned int fingers, x1 = 0, y1 = 0, x2 = 0, y2 = 0;
+ unsigned int width = 0, pres = 0;
/* byte 0: n1 n0 . . . . R L */
fingers = (packet[0] & 0xc0) >> 6;
- input_report_key(dev, BTN_TOUCH, fingers != 0);
switch (fingers) {
case 3:
@@ -300,9 +300,6 @@ static void elantech_report_absolute_v2(struct psmouse *psmouse)
*/
y1 = ETP_YMAX_V2 - (((packet[4] & 0x0f) << 8) | packet[5]);
- input_report_abs(dev, ABS_X, x1);
- input_report_abs(dev, ABS_Y, y1);
-
pres = (packet[1] & 0xf0) | ((packet[4] & 0xf0) >> 4);
width = ((packet[0] & 0x30) >> 2) | ((packet[3] & 0x30) >> 4);
break;
@@ -314,22 +311,18 @@ static void elantech_report_absolute_v2(struct psmouse *psmouse)
* byte 0: . . ay8 ax8 . . . .
* byte 1: ax7 ax6 ax5 ax4 ax3 ax2 ax1 ax0
*/
- x1 = ((packet[0] & 0x10) << 4) | packet[1];
+ x1 = (((packet[0] & 0x10) << 4) | packet[1]) << 2;
/* byte 2: ay7 ay6 ay5 ay4 ay3 ay2 ay1 ay0 */
- y1 = ETP_2FT_YMAX - (((packet[0] & 0x20) << 3) | packet[2]);
+ y1 = ETP_YMAX_V2 -
+ ((((packet[0] & 0x20) << 3) | packet[2]) << 2);
/*
* byte 3: . . by8 bx8 . . . .
* byte 4: bx7 bx6 bx5 bx4 bx3 bx2 bx1 bx0
*/
- x2 = ((packet[3] & 0x10) << 4) | packet[4];
+ x2 = (((packet[3] & 0x10) << 4) | packet[4]) << 2;
/* byte 5: by7 by8 by5 by4 by3 by2 by1 by0 */
- y2 = ETP_2FT_YMAX - (((packet[3] & 0x20) << 3) | packet[5]);
- /*
- * For compatibility with the X Synaptics driver scale up
- * one coordinate and report as ordinary mouse movent
- */
- input_report_abs(dev, ABS_X, x1 << 2);
- input_report_abs(dev, ABS_Y, y1 << 2);
+ y2 = ETP_YMAX_V2 -
+ ((((packet[3] & 0x20) << 3) | packet[5]) << 2);
/* Unknown so just report sensible values */
pres = 127;
@@ -337,6 +330,11 @@ static void elantech_report_absolute_v2(struct psmouse *psmouse)
break;
}
+ input_report_key(dev, BTN_TOUCH, fingers != 0);
+ if (fingers != 0) {
+ input_report_abs(dev, ABS_X, x1);
+ input_report_abs(dev, ABS_Y, y1);
+ }
elantech_report_semi_mt_data(dev, fingers, x1, y1, x2, y2);
input_report_key(dev, BTN_TOOL_FINGER, fingers == 1);
input_report_key(dev, BTN_TOOL_DOUBLETAP, fingers == 2);
diff --git a/drivers/input/mouse/elantech.h b/drivers/input/mouse/elantech.h
index fabb2b9..1c5894e 100644
--- a/drivers/input/mouse/elantech.h
+++ b/drivers/input/mouse/elantech.h
@@ -82,17 +82,6 @@
#define ETP_WMIN_V2 0
#define ETP_WMAX_V2 15
-/*
- * For two finger touches the coordinate of each finger gets reported
- * separately but with reduced resolution.
- */
-#define ETP_2FT_FUZZ 4
-
-#define ETP_2FT_XMIN ( 0 + ETP_2FT_FUZZ)
-#define ETP_2FT_XMAX (288 - ETP_2FT_FUZZ)
-#define ETP_2FT_YMIN ( 0 + ETP_2FT_FUZZ)
-#define ETP_2FT_YMAX (192 - ETP_2FT_FUZZ)
-
struct elantech_data {
unsigned char reg_10;
unsigned char reg_11;
--
1.7.4.1
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCH v2 3/7] Input: elantech - use firmware provided x, y ranges
2011-08-24 5:44 ` JJ Ding
` (2 preceding siblings ...)
(?)
@ 2011-08-24 5:44 ` JJ Ding
-1 siblings, 0 replies; 14+ messages in thread
From: JJ Ding @ 2011-08-24 5:44 UTC (permalink / raw)
To: linux-input, linux-kernel
Cc: Seth Forshee, Dmitry Torokhov, Aaron Huang, Tom Lin,
Éric Piel, Daniel Kurtz, Chase Douglas, Henrik Rydberg,
Alessandro Rubini, JJ Ding
With newer hardware, the touchpad provides range info.
Let's use it.
Signed-off-by: JJ Ding <jj_ding@emc.com.tw>
---
drivers/input/mouse/elantech.c | 71 +++++++++++++++++++++++++++++++--------
drivers/input/mouse/elantech.h | 3 +-
2 files changed, 58 insertions(+), 16 deletions(-)
diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c
index cd8e2e5..282b8b6 100644
--- a/drivers/input/mouse/elantech.c
+++ b/drivers/input/mouse/elantech.c
@@ -223,7 +223,7 @@ static void elantech_report_absolute_v1(struct psmouse *psmouse)
input_report_abs(dev, ABS_X,
((packet[1] & 0x0c) << 6) | packet[2]);
input_report_abs(dev, ABS_Y,
- ETP_YMAX_V1 - (((packet[1] & 0x03) << 8) | packet[3]));
+ etd->y_max - (((packet[1] & 0x03) << 8) | packet[3]));
}
input_report_key(dev, BTN_TOOL_FINGER, fingers == 1);
@@ -233,7 +233,7 @@ static void elantech_report_absolute_v1(struct psmouse *psmouse)
input_report_key(dev, BTN_RIGHT, packet[0] & 0x02);
if (etd->fw_version < 0x020000 &&
- (etd->capabilities & ETP_CAP_HAS_ROCKER)) {
+ (etd->capabilities[0] & ETP_CAP_HAS_ROCKER)) {
/* rocker up */
input_report_key(dev, BTN_FORWARD, packet[0] & 0x40);
/* rocker down */
@@ -298,7 +298,7 @@ static void elantech_report_absolute_v2(struct psmouse *psmouse)
* byte 4: . . . . y11 y10 y9 y8
* byte 5: y7 y6 y5 y4 y3 y2 y1 y0
*/
- y1 = ETP_YMAX_V2 - (((packet[4] & 0x0f) << 8) | packet[5]);
+ y1 = etd->y_max - (((packet[4] & 0x0f) << 8) | packet[5]);
pres = (packet[1] & 0xf0) | ((packet[4] & 0xf0) >> 4);
width = ((packet[0] & 0x30) >> 2) | ((packet[3] & 0x30) >> 4);
@@ -313,7 +313,7 @@ static void elantech_report_absolute_v2(struct psmouse *psmouse)
*/
x1 = (((packet[0] & 0x10) << 4) | packet[1]) << 2;
/* byte 2: ay7 ay6 ay5 ay4 ay3 ay2 ay1 ay0 */
- y1 = ETP_YMAX_V2 -
+ y1 = etd->y_max -
((((packet[0] & 0x20) << 3) | packet[2]) << 2);
/*
* byte 3: . . by8 bx8 . . . .
@@ -321,7 +321,7 @@ static void elantech_report_absolute_v2(struct psmouse *psmouse)
*/
x2 = (((packet[3] & 0x10) << 4) | packet[4]) << 2;
/* byte 5: by7 by8 by5 by4 by3 by2 by1 by0 */
- y2 = ETP_YMAX_V2 -
+ y2 = etd->y_max -
((((packet[3] & 0x20) << 3) | packet[5]) << 2);
/* Unknown so just report sensible values */
@@ -468,6 +468,41 @@ static int elantech_set_absolute_mode(struct psmouse *psmouse)
return rc;
}
+static void set_range(struct psmouse *psmouse, unsigned int *x_min,
+ unsigned int *y_min, unsigned int *x_max,
+ unsigned int *y_max)
+{
+ struct elantech_data *etd = psmouse->private;
+ int i;
+
+ switch (etd->hw_version) {
+ case 1:
+ *x_min = ETP_XMIN_V1;
+ *y_min = ETP_YMIN_V1;
+ *x_max = ETP_XMAX_V1;
+ *y_max = ETP_YMAX_V1;
+ break;
+
+ case 2:
+ if (etd->fw_version == 0x020800 ||
+ etd->fw_version == 0x020b00 ||
+ etd->fw_version == 0x020030) {
+ *x_min = ETP_XMIN_V2;
+ *y_min = ETP_YMIN_V2;
+ *x_max = ETP_XMAX_V2;
+ *y_max = ETP_YMAX_V2;
+ } else {
+ i = (etd->fw_version > 0x020800 &&
+ etd->fw_version < 0x020900) ? 1 : 2;
+ *x_min = 0;
+ *y_min = 0;
+ *x_max = (etd->capabilities[1] - i) * 64;
+ *y_max = (etd->capabilities[2] - i) * 64;
+ }
+ break;
+ }
+}
+
/*
* Set the appropriate event bits for the input subsystem
*/
@@ -475,6 +510,9 @@ static void elantech_set_input_params(struct psmouse *psmouse)
{
struct input_dev *dev = psmouse->dev;
struct elantech_data *etd = psmouse->private;
+ unsigned int x_min = 0, y_min = 0, x_max = 0, y_max = 0;
+
+ set_range(psmouse, &x_min, &y_min, &x_max, &y_max);
__set_bit(EV_KEY, dev->evbit);
__set_bit(EV_ABS, dev->evbit);
@@ -492,18 +530,18 @@ static void elantech_set_input_params(struct psmouse *psmouse)
case 1:
/* Rocker button */
if (etd->fw_version < 0x020000 &&
- (etd->capabilities & ETP_CAP_HAS_ROCKER)) {
+ (etd->capabilities[0] & ETP_CAP_HAS_ROCKER)) {
__set_bit(BTN_FORWARD, dev->keybit);
__set_bit(BTN_BACK, dev->keybit);
}
- input_set_abs_params(dev, ABS_X, ETP_XMIN_V1, ETP_XMAX_V1, 0, 0);
- input_set_abs_params(dev, ABS_Y, ETP_YMIN_V1, ETP_YMAX_V1, 0, 0);
+ input_set_abs_params(dev, ABS_X, x_min, x_max, 0, 0);
+ input_set_abs_params(dev, ABS_Y, y_min, y_max, 0, 0);
break;
case 2:
__set_bit(BTN_TOOL_QUADTAP, dev->keybit);
- input_set_abs_params(dev, ABS_X, ETP_XMIN_V2, ETP_XMAX_V2, 0, 0);
- input_set_abs_params(dev, ABS_Y, ETP_YMIN_V2, ETP_YMAX_V2, 0, 0);
+ input_set_abs_params(dev, ABS_X, x_min, x_max, 0, 0);
+ input_set_abs_params(dev, ABS_Y, y_min, y_max, 0, 0);
if (etd->reports_pressure) {
input_set_abs_params(dev, ABS_PRESSURE, ETP_PMIN_V2,
ETP_PMAX_V2, 0, 0);
@@ -512,10 +550,12 @@ static void elantech_set_input_params(struct psmouse *psmouse)
}
__set_bit(INPUT_PROP_SEMI_MT, dev->propbit);
input_mt_init_slots(dev, 2);
- input_set_abs_params(dev, ABS_MT_POSITION_X, ETP_XMIN_V2, ETP_XMAX_V2, 0, 0);
- input_set_abs_params(dev, ABS_MT_POSITION_Y, ETP_YMIN_V2, ETP_YMAX_V2, 0, 0);
+ input_set_abs_params(dev, ABS_MT_POSITION_X, x_min, x_max, 0, 0);
+ input_set_abs_params(dev, ABS_MT_POSITION_Y, y_min, y_max, 0, 0);
break;
}
+
+ etd->y_max = y_max;
}
struct elantech_attr_data {
@@ -769,13 +809,14 @@ int elantech_init(struct psmouse *psmouse)
pr_info("assuming hardware version %d, firmware version %d.%d.%d\n",
etd->hw_version, param[0], param[1], param[2]);
- if (synaptics_send_cmd(psmouse, ETP_CAPABILITIES_QUERY, param)) {
+ if (synaptics_send_cmd(psmouse, ETP_CAPABILITIES_QUERY,
+ etd->capabilities)) {
pr_err("failed to query capabilities.\n");
goto init_fail;
}
pr_info("Synaptics capabilities query result 0x%02x, 0x%02x, 0x%02x.\n",
- param[0], param[1], param[2]);
- etd->capabilities = param[0];
+ etd->capabilities[0], etd->capabilities[1],
+ etd->capabilities[2]);
/*
* This firmware suffers from misreporting coordinates when
diff --git a/drivers/input/mouse/elantech.h b/drivers/input/mouse/elantech.h
index 1c5894e..b54ea27 100644
--- a/drivers/input/mouse/elantech.h
+++ b/drivers/input/mouse/elantech.h
@@ -93,13 +93,14 @@ struct elantech_data {
unsigned char reg_25;
unsigned char reg_26;
unsigned char debug;
- unsigned char capabilities;
+ unsigned char capabilities[3];
bool paritycheck;
bool jumpy_cursor;
bool reports_pressure;
unsigned char hw_version;
unsigned int fw_version;
unsigned int single_finger_reports;
+ unsigned int y_max;
unsigned char parity[256];
};
--
1.7.4.1
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCH v2 4/7] Input: elantech - remove ETP_EDGE_FUZZ_V2
2011-08-24 5:44 ` JJ Ding
` (3 preceding siblings ...)
(?)
@ 2011-08-24 5:44 ` JJ Ding
-1 siblings, 0 replies; 14+ messages in thread
From: JJ Ding @ 2011-08-24 5:44 UTC (permalink / raw)
To: linux-input, linux-kernel
Cc: Seth Forshee, Dmitry Torokhov, Aaron Huang, Tom Lin,
Éric Piel, Daniel Kurtz, Chase Douglas, Henrik Rydberg,
Alessandro Rubini, JJ Ding
Don't try to be too clever and remove ETP_EDGE_FUZZ_V2. X, Y ranges
should be just the raw resolution of the device. Otherwise, they can
cause underflow on the Y axis.
Suggested-by: Éric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: JJ Ding <jj_ding@emc.com.tw>
---
drivers/input/mouse/elantech.h | 15 ++++++---------
1 files changed, 6 insertions(+), 9 deletions(-)
diff --git a/drivers/input/mouse/elantech.h b/drivers/input/mouse/elantech.h
index b54ea27..d9e6144 100644
--- a/drivers/input/mouse/elantech.h
+++ b/drivers/input/mouse/elantech.h
@@ -66,16 +66,13 @@
#define ETP_YMAX_V1 (384 - ETP_EDGE_FUZZ_V1)
/*
- * It seems the resolution for hardware version 2 doubled.
- * Hence the X and Y ranges are doubled too.
- * The bezel around the pad also appears to be smaller
+ * The resolution for older v2 hardware doubled.
+ * (newer v2's firmware provides command so we can query)
*/
-#define ETP_EDGE_FUZZ_V2 8
-
-#define ETP_XMIN_V2 ( 0 + ETP_EDGE_FUZZ_V2)
-#define ETP_XMAX_V2 (1152 - ETP_EDGE_FUZZ_V2)
-#define ETP_YMIN_V2 ( 0 + ETP_EDGE_FUZZ_V2)
-#define ETP_YMAX_V2 ( 768 - ETP_EDGE_FUZZ_V2)
+#define ETP_XMIN_V2 0
+#define ETP_XMAX_V2 1152
+#define ETP_YMIN_V2 0
+#define ETP_YMAX_V2 768
#define ETP_PMIN_V2 0
#define ETP_PMAX_V2 255
--
1.7.4.1
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCH v2 5/7] Input: elantech - packet checking for v2 hardware
2011-08-24 5:44 ` JJ Ding
` (4 preceding siblings ...)
(?)
@ 2011-08-24 5:44 ` JJ Ding
-1 siblings, 0 replies; 14+ messages in thread
From: JJ Ding @ 2011-08-24 5:44 UTC (permalink / raw)
To: linux-input, linux-kernel
Cc: Seth Forshee, Dmitry Torokhov, Aaron Huang, Tom Lin,
Éric Piel, Daniel Kurtz, Chase Douglas, Henrik Rydberg,
Alessandro Rubini, JJ Ding
For v2 hardware, there is no real parity check, but we can still check
some constant bits for data integrity.
Also rename elantech_check_parity_v1 to elantech_packet_check_v1 to make
these packet checking function names consistent.
Signed-off-by: JJ Ding <jj_ding@emc.com.tw>
---
drivers/input/mouse/elantech.c | 39 ++++++++++++++++++++++++++++++++++-----
1 files changed, 34 insertions(+), 5 deletions(-)
diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c
index 282b8b6..008e8c2 100644
--- a/drivers/input/mouse/elantech.c
+++ b/drivers/input/mouse/elantech.c
@@ -350,7 +350,7 @@ static void elantech_report_absolute_v2(struct psmouse *psmouse)
input_sync(dev);
}
-static int elantech_check_parity_v1(struct psmouse *psmouse)
+static int elantech_packet_check_v1(struct psmouse *psmouse)
{
struct elantech_data *etd = psmouse->private;
unsigned char *packet = psmouse->packet;
@@ -374,6 +374,34 @@ static int elantech_check_parity_v1(struct psmouse *psmouse)
etd->parity[packet[3]] == p3;
}
+static int elantech_packet_check_v2(struct psmouse *psmouse)
+{
+ struct elantech_data *etd = psmouse->private;
+ unsigned char *packet = psmouse->packet;
+
+ /*
+ * V2 hardware has two flavors. Older ones that do not report pressure,
+ * and newer ones that reports pressure and width. With newer ones, all
+ * packets (1, 2, 3 finger touch) have the same constant bits. With
+ * older ones, 1/3 finger touch packets and 2 finger touch packets
+ * have different constant bits.
+ * With all three cases, if the constant bits are not exactly what I
+ * expected, I consider them invalid.
+ */
+ if (etd->reports_pressure)
+ return (packet[0] & 0x0c) == 0x04 &&
+ (packet[3] & 0x0f) == 0x02;
+
+ if ((packet[0] & 0xc0) == 0x80)
+ return (packet[0] & 0x0c) == 0x0c &&
+ (packet[3] & 0x0e) == 0x08;
+
+ return (packet[0] & 0x3c) == 0x3c &&
+ (packet[1] & 0xf0) == 0x00 &&
+ (packet[3] & 0x3e) == 0x38 &&
+ (packet[4] & 0xf0) == 0x00;
+}
+
/*
* Process byte stream from mouse and handle complete packets
*/
@@ -389,14 +417,16 @@ static psmouse_ret_t elantech_process_byte(struct psmouse *psmouse)
switch (etd->hw_version) {
case 1:
- if (etd->paritycheck && !elantech_check_parity_v1(psmouse))
+ if (etd->paritycheck && !elantech_packet_check_v1(psmouse))
return PSMOUSE_BAD_DATA;
elantech_report_absolute_v1(psmouse);
break;
case 2:
- /* We don't know how to check parity in protocol v2 */
+ if (etd->paritycheck && !elantech_packet_check_v2(psmouse))
+ return PSMOUSE_BAD_DATA;
+
elantech_report_absolute_v2(psmouse);
break;
}
@@ -795,8 +825,7 @@ int elantech_init(struct psmouse *psmouse)
etd->hw_version = 2;
/* For now show extra debug information */
etd->debug = 1;
- /* Don't know how to do parity checking for version 2 */
- etd->paritycheck = 0;
+ etd->paritycheck = 1;
if (etd->fw_version >= 0x020800)
etd->reports_pressure = true;
--
1.7.4.1
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCH v2 6/7] Input: elantech - clean up elantech_init
2011-08-24 5:44 ` JJ Ding
` (5 preceding siblings ...)
(?)
@ 2011-08-24 5:44 ` JJ Ding
-1 siblings, 0 replies; 14+ messages in thread
From: JJ Ding @ 2011-08-24 5:44 UTC (permalink / raw)
To: linux-input, linux-kernel
Cc: Seth Forshee, Dmitry Torokhov, Aaron Huang, Tom Lin,
Éric Piel, Daniel Kurtz, Chase Douglas, Henrik Rydberg,
Alessandro Rubini, JJ Ding
Group property setting code into elantech_set_properties.
Signed-off-by: JJ Ding <jj_ding@emc.com.tw>
---
drivers/input/mouse/elantech.c | 69 ++++++++++++++++++++++-----------------
1 files changed, 39 insertions(+), 30 deletions(-)
diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c
index 008e8c2..2ae7c49 100644
--- a/drivers/input/mouse/elantech.c
+++ b/drivers/input/mouse/elantech.c
@@ -791,6 +791,42 @@ static int elantech_reconnect(struct psmouse *psmouse)
}
/*
+ * determine hardware version and set some properties according to it.
+ */
+static void elantech_set_properties(struct elantech_data *etd)
+{
+ /*
+ * Assume every version greater than 0x020030 is new EeePC style
+ * hardware with 6 byte packets, except 0x020600
+ */
+ if (etd->fw_version < 0x020030 || etd->fw_version == 0x020600)
+ etd->hw_version = 1;
+ else
+ etd->hw_version = 2;
+
+ /*
+ * Turn on packet checking by default.
+ */
+ etd->paritycheck = 1;
+
+ /*
+ * This firmware suffers from misreporting coordinates when
+ * a touch action starts causing the mouse cursor or scrolled page
+ * to jump. Enable a workaround.
+ */
+ etd->jumpy_cursor =
+ (etd->fw_version == 0x020022 || etd->fw_version == 0x020600);
+
+ if (etd->hw_version == 2) {
+ /* For now show extra debug information */
+ etd->debug = 1;
+
+ if (etd->fw_version >= 0x020800)
+ etd->reports_pressure = true;
+ }
+}
+
+/*
* Initialize the touchpad and create sysfs entries
*/
int elantech_init(struct psmouse *psmouse)
@@ -816,26 +852,9 @@ int elantech_init(struct psmouse *psmouse)
}
etd->fw_version = (param[0] << 16) | (param[1] << 8) | param[2];
-
- /*
- * Assume every version greater than this is new EeePC style
- * hardware with 6 byte packets
- */
- if (etd->fw_version >= 0x020030) {
- etd->hw_version = 2;
- /* For now show extra debug information */
- etd->debug = 1;
- etd->paritycheck = 1;
-
- if (etd->fw_version >= 0x020800)
- etd->reports_pressure = true;
-
- } else {
- etd->hw_version = 1;
- etd->paritycheck = 1;
- }
-
- pr_info("assuming hardware version %d, firmware version %d.%d.%d\n",
+ elantech_set_properties(etd);
+ pr_info("assuming hardware version %d "
+ "(with firmware version 0x%02x%02x%02x)\n",
etd->hw_version, param[0], param[1], param[2]);
if (synaptics_send_cmd(psmouse, ETP_CAPABILITIES_QUERY,
@@ -847,16 +866,6 @@ int elantech_init(struct psmouse *psmouse)
etd->capabilities[0], etd->capabilities[1],
etd->capabilities[2]);
- /*
- * This firmware suffers from misreporting coordinates when
- * a touch action starts causing the mouse cursor or scrolled page
- * to jump. Enable a workaround.
- */
- if (etd->fw_version == 0x020022 || etd->fw_version == 0x020600) {
- pr_info("firmware version 2.0.34/2.6.0 detected, enabling jumpy cursor workaround\n");
- etd->jumpy_cursor = true;
- }
-
if (elantech_set_absolute_mode(psmouse)) {
pr_err("failed to put touchpad into absolute mode.\n");
goto init_fail;
--
1.7.4.1
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCH v2 7/7] Input: elantech - add v3 hardware support
2011-08-24 5:44 ` JJ Ding
` (6 preceding siblings ...)
(?)
@ 2011-08-24 5:44 ` JJ Ding
2011-08-24 14:35 ` Seth Forshee
-1 siblings, 1 reply; 14+ messages in thread
From: JJ Ding @ 2011-08-24 5:44 UTC (permalink / raw)
To: linux-input, linux-kernel
Cc: Seth Forshee, Dmitry Torokhov, Aaron Huang, Tom Lin,
Éric Piel, Daniel Kurtz, Chase Douglas, Henrik Rydberg,
Alessandro Rubini, JJ Ding
v3 hardware's packet format is almost identical to v2 (one/three finger touch),
except when sensing two finger touch, the hardware sends 12 bytes of data.
Signed-off-by: JJ Ding <jj_ding@emc.com.tw>
---
Documentation/input/elantech.txt | 117 +++++++++++++++++++---
drivers/input/mouse/elantech.c | 204 +++++++++++++++++++++++++++++++++++---
drivers/input/mouse/elantech.h | 12 +++
3 files changed, 305 insertions(+), 28 deletions(-)
diff --git a/Documentation/input/elantech.txt b/Documentation/input/elantech.txt
index bce9941..cee08ee 100644
--- a/Documentation/input/elantech.txt
+++ b/Documentation/input/elantech.txt
@@ -16,15 +16,22 @@ Contents
1. Introduction
2. Extra knobs
- 3. Hardware version 1
- 3.1 Registers
- 3.2 Native relative mode 4 byte packet format
- 3.3 Native absolute mode 4 byte packet format
- 4. Hardware version 2
+ 3. Differentiating hardware versions
+ 4. Hardware version 1
4.1 Registers
- 4.2 Native absolute mode 6 byte packet format
- 4.2.1 One finger touch
- 4.2.2 Two finger touch
+ 4.2 Native relative mode 4 byte packet format
+ 4.3 Native absolute mode 4 byte packet format
+ 5. Hardware version 2
+ 5.1 Registers
+ 5.2 Native absolute mode 6 byte packet format
+ 5.2.1 Parity checking and packet re-synchronization
+ 5.2.2 One/Three finger touch
+ 5.2.3 Two finger touch
+ 6. Hardware version 3
+ 6.1 Registers
+ 6.2 Native absolute mode 6 byte packet format
+ 6.2.1 One/Three finger touch
+ 6.2.2 Two finger touch
@@ -375,7 +382,7 @@ For all the other ones, there are just a few constant bits:
In case an error is detected, all the packets are shifted by one (and packet[0] is discarded).
-5.2.1 One/Three finger touch
+5.2.2 One/Three finger touch
~~~~~~~~~~~~~~~~
byte 0:
@@ -384,7 +391,7 @@ byte 0:
n1 n0 w3 w2 . . R L
L, R = 1 when Left, Right mouse button pressed
- n1..n0 = numbers of fingers on touchpad
+ n1..n0 = number of fingers on touchpad
byte 1:
@@ -432,7 +439,7 @@ byte 5:
y11..y0 = absolute y value (vertical)
-4.2.2 Two finger touch
+5.2.3 Two finger touch
~~~~~~~~~~~~~~~~
Note that the two pairs of coordinates are not exactly the coordinates of the
@@ -446,7 +453,7 @@ byte 0:
n1 n0 ay8 ax8 . . R L
L, R = 1 when Left, Right mouse button pressed
- n1..n0 = numbers of fingers on touchpad
+ n1..n0 = number of fingers on touchpad
byte 1:
@@ -480,3 +487,89 @@ byte 5:
by7 by8 by5 by4 by3 by2 by1 by0
by8..by0 = upper-right finger absolute y value
+
+/////////////////////////////////////////////////////////////////////////////
+
+6. Hardware version 3
+ ==================
+
+6.1 Registers
+ ~~~~~~~~~
+* reg_10
+
+ bit 7 6 5 4 3 2 1 0
+ 0 0 0 0 0 0 0 A
+
+ A: 1 = enable absolute tracking
+
+6.2 Native absolute mode 6 byte packet format
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+1 and 3 finger touch shares the same 6-byte packet format, except that
+3 finger touch only reports the position of the center of all three fingers.
+
+Firmware would send 12 bytes of data for 2 finger touch.
+
+Note on debounce:
+In case the box has unstable power supply or other electricity issues, or
+when number of finger changes, F/W would send "debounce packet" to inform
+driver that the hardware is in debounce status.
+The debouce packet has the following signature:
+ byte 0: 0xc4
+ byte 1: 0xff
+ byte 2: 0xff
+ byte 3: 0x02
+ byte 4: 0xff
+ byte 5: 0xff
+When we encounter this kind of packet, we just ignore it.
+
+6.2.1 One/Three finger touch
+ ~~~~~~~~~~~~~~~~~~~~~~
+
+byte 0:
+
+ bit 7 6 5 4 3 2 1 0
+ n1 n0 w3 w2 0 1 R L
+
+ L, R = 1 when Left, Right mouse button pressed
+ n1..n0 = number of fingers on touchpad
+
+byte 1:
+
+ bit 7 6 5 4 3 2 1 0
+ p7 p6 p5 p4 x11 x10 x9 x8
+
+byte 2:
+
+ bit 7 6 5 4 3 2 1 0
+ x7 x6 x5 x4 x3 x2 x1 x0
+
+ x11..x0 = absolute x value (horizontal)
+
+byte 3:
+
+ bit 7 6 5 4 3 2 1 0
+ 0 0 w1 w0 0 0 1 0
+
+ w3..w0 = width of the finger touch
+
+byte 4:
+
+ bit 7 6 5 4 3 2 1 0
+ p3 p1 p2 p0 y11 y10 y9 y8
+
+ p7..p0 = pressure
+
+byte 5:
+
+ bit 7 6 5 4 3 2 1 0
+ y7 y6 y5 y4 y3 y2 y1 y0
+
+ y11..y0 = absolute y value (vertical)
+
+6.2.2 Two finger touch
+ ~~~~~~~~~~~~~~~~
+
+The packet format is exactly the same for two finger touch, except the hardware
+sends two 6 byte packets. The first packet contains data for the first finger,
+the second packet has data for the second finger. So for two finger touch a
+total of 12 bytes are sent.
diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c
index 2ae7c49..6acecf7 100644
--- a/drivers/input/mouse/elantech.c
+++ b/drivers/input/mouse/elantech.c
@@ -108,6 +108,16 @@ static int elantech_read_reg(struct psmouse *psmouse, unsigned char reg,
rc = -1;
}
break;
+
+ case 3:
+ if (elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) ||
+ elantech_ps2_command(psmouse, NULL, ETP_REGISTER_READWRITE) ||
+ elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) ||
+ elantech_ps2_command(psmouse, NULL, reg) ||
+ elantech_ps2_command(psmouse, param, PSMOUSE_CMD_GETINFO)) {
+ rc = -1;
+ }
+ break;
}
if (rc)
@@ -154,6 +164,18 @@ static int elantech_write_reg(struct psmouse *psmouse, unsigned char reg,
rc = -1;
}
break;
+
+ case 3:
+ if (elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) ||
+ elantech_ps2_command(psmouse, NULL, ETP_REGISTER_READWRITE) ||
+ elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) ||
+ elantech_ps2_command(psmouse, NULL, reg) ||
+ elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) ||
+ elantech_ps2_command(psmouse, NULL, val) ||
+ elantech_ps2_command(psmouse, NULL, PSMOUSE_CMD_SETSCALE11)) {
+ rc = -1;
+ }
+ break;
}
if (rc)
@@ -350,6 +372,84 @@ static void elantech_report_absolute_v2(struct psmouse *psmouse)
input_sync(dev);
}
+/*
+ * Interpret complete data packets and report absolute mode input events for
+ * hardware version 3. (12 byte packets for two fingers)
+ */
+static void elantech_report_absolute_v3(struct psmouse *psmouse,
+ int packet_type)
+{
+ struct input_dev *dev = psmouse->dev;
+ struct elantech_data *etd = psmouse->private;
+ unsigned char *packet = psmouse->packet;
+ unsigned int fingers = 0, x1 = 0, y1 = 0, x2 = 0, y2 = 0;
+ unsigned int width = 0, pres = 0;
+
+ /* byte 0: n1 n0 . . . . R L */
+ fingers = (packet[0] & 0xc0) >> 6;
+
+ switch (fingers) {
+ case 3:
+ case 1:
+ /*
+ * byte 1: . . . . x11 x10 x9 x8
+ * byte 2: x7 x6 x5 x4 x4 x2 x1 x0
+ */
+ x1 = ((packet[1] & 0x0f) << 8) | packet[2];
+ /*
+ * byte 4: . . . . y11 y10 y9 y8
+ * byte 5: y7 y6 y5 y4 y3 y2 y1 y0
+ */
+ y1 = etd->y_max - (((packet[4] & 0x0f) << 8) | packet[5]);
+ break;
+
+ case 2:
+ if (packet_type == PACKET_V3_HEAD) {
+ /*
+ * byte 1: . . . . ax11 ax10 ax9 ax8
+ * byte 2: ax7 ax6 ax5 ax4 ax3 ax2 ax1 ax0
+ */
+ etd->prev_x = ((packet[1] & 0x0f) << 8) | packet[2];
+ /*
+ * byte 4: . . . . ay11 ay10 ay9 ay8
+ * byte 5: ay7 ay6 ay5 ay4 ay3 ay2 ay1 ay0
+ */
+ etd->prev_y = etd->y_max -
+ (((packet[4] & 0x0f) << 8) | packet[5]);
+ /*
+ * wait for next packet
+ */
+ return;
+ }
+
+ /* packet_type == PACKET_V3_TAIL */
+ x1 = etd->prev_x;
+ y1 = etd->prev_y;
+ x2 = ((packet[1] & 0x0f) << 8) | packet[2];
+ y2 = etd->y_max - (((packet[4] & 0x0f) << 8) | packet[5]);
+ break;
+ }
+
+ pres = (packet[1] & 0xf0) | ((packet[4] & 0xf0) >> 4);
+ width = ((packet[0] & 0x30) >> 2) | ((packet[3] & 0x30) >> 4);
+
+ input_report_key(dev, BTN_TOUCH, fingers != 0);
+ if (fingers != 0) {
+ input_report_abs(dev, ABS_X, x1);
+ input_report_abs(dev, ABS_Y, y1);
+ }
+ elantech_report_semi_mt_data(dev, fingers, x1, y1, x2, y2);
+ input_report_key(dev, BTN_TOOL_FINGER, fingers == 1);
+ input_report_key(dev, BTN_TOOL_DOUBLETAP, fingers == 2);
+ input_report_key(dev, BTN_TOOL_TRIPLETAP, fingers == 3);
+ input_report_key(dev, BTN_LEFT, packet[0] & 0x01);
+ input_report_key(dev, BTN_RIGHT, packet[0] & 0x02);
+ input_report_abs(dev, ABS_PRESSURE, pres);
+ input_report_abs(dev, ABS_TOOL_WIDTH, width);
+
+ input_sync(dev);
+}
+
static int elantech_packet_check_v1(struct psmouse *psmouse)
{
struct elantech_data *etd = psmouse->private;
@@ -403,11 +503,39 @@ static int elantech_packet_check_v2(struct psmouse *psmouse)
}
/*
+ * We check the constant bits to determine what packet type we get,
+ * so packet checking is mandatory for v3 hardware.
+ */
+static int elantech_packet_check_v3(struct psmouse *psmouse)
+{
+ unsigned char *packet = psmouse->packet;
+
+ if ((packet[0] & 0x0c) == 0x04 &&
+ (packet[3] & 0xcf) == 0x02)
+ return PACKET_V3_HEAD;
+
+ if ((packet[0] & 0x0c) == 0x0c &&
+ (packet[3] & 0xce) == 0x0c)
+ return PACKET_V3_TAIL;
+
+ if (packet[0] == 0xc4 &&
+ packet[1] == 0xff &&
+ packet[2] == 0xff &&
+ packet[3] == 0x02 &&
+ packet[4] == 0xff &&
+ packet[5] == 0xff)
+ return PACKET_DEBOUNCE;
+
+ return PACKET_UNKNOWN;
+}
+
+/*
* Process byte stream from mouse and handle complete packets
*/
static psmouse_ret_t elantech_process_byte(struct psmouse *psmouse)
{
struct elantech_data *etd = psmouse->private;
+ int packet_type;
if (psmouse->pktcnt < psmouse->pktsize)
return PSMOUSE_GOOD_DATA;
@@ -429,6 +557,18 @@ static psmouse_ret_t elantech_process_byte(struct psmouse *psmouse)
elantech_report_absolute_v2(psmouse);
break;
+
+ case 3:
+ packet_type = elantech_packet_check_v3(psmouse);
+ /* ignore debounce */
+ if (packet_type == PACKET_DEBOUNCE)
+ return PSMOUSE_FULL_PACKET;
+
+ if (packet_type == PACKET_UNKNOWN)
+ return PSMOUSE_BAD_DATA;
+
+ elantech_report_absolute_v3(psmouse, packet_type);
+ break;
}
return PSMOUSE_FULL_PACKET;
@@ -463,8 +603,15 @@ static int elantech_set_absolute_mode(struct psmouse *psmouse)
elantech_write_reg(psmouse, 0x11, etd->reg_11) ||
elantech_write_reg(psmouse, 0x21, etd->reg_21)) {
rc = -1;
- break;
}
+ break;
+
+ case 3:
+ etd->reg_10 = 0x0b;
+ if (elantech_write_reg(psmouse, 0x10, etd->reg_10))
+ rc = -1;
+
+ break;
}
if (rc == 0) {
@@ -498,11 +645,12 @@ static int elantech_set_absolute_mode(struct psmouse *psmouse)
return rc;
}
-static void set_range(struct psmouse *psmouse, unsigned int *x_min,
+static int set_range(struct psmouse *psmouse, unsigned int *x_min,
unsigned int *y_min, unsigned int *x_max,
unsigned int *y_max)
{
struct elantech_data *etd = psmouse->private;
+ unsigned char param[3];
int i;
switch (etd->hw_version) {
@@ -530,19 +678,30 @@ static void set_range(struct psmouse *psmouse, unsigned int *x_min,
*y_max = (etd->capabilities[2] - i) * 64;
}
break;
+
+ case 3:
+ if (synaptics_send_cmd(psmouse, ETP_FW_ID_QUERY, param))
+ return -1;
+
+ *x_max = (0x0f & param[0]) << 8 | param[1];
+ *y_max = (0xf0 & param[0]) << 4 | param[2];
+ break;
}
+
+ return 0;
}
/*
* Set the appropriate event bits for the input subsystem
*/
-static void elantech_set_input_params(struct psmouse *psmouse)
+static int elantech_set_input_params(struct psmouse *psmouse)
{
struct input_dev *dev = psmouse->dev;
struct elantech_data *etd = psmouse->private;
unsigned int x_min = 0, y_min = 0, x_max = 0, y_max = 0;
- set_range(psmouse, &x_min, &y_min, &x_max, &y_max);
+ if (set_range(psmouse, &x_min, &y_min, &x_max, &y_max))
+ return -1;
__set_bit(EV_KEY, dev->evbit);
__set_bit(EV_ABS, dev->evbit);
@@ -570,6 +729,8 @@ static void elantech_set_input_params(struct psmouse *psmouse)
case 2:
__set_bit(BTN_TOOL_QUADTAP, dev->keybit);
+ /* fall through */
+ case 3:
input_set_abs_params(dev, ABS_X, x_min, x_max, 0, 0);
input_set_abs_params(dev, ABS_Y, y_min, y_max, 0, 0);
if (etd->reports_pressure) {
@@ -586,6 +747,8 @@ static void elantech_set_input_params(struct psmouse *psmouse)
}
etd->y_max = y_max;
+
+ return 0;
}
struct elantech_attr_data {
@@ -727,7 +890,8 @@ int elantech_detect(struct psmouse *psmouse, bool set_properties)
* Report this in case there are Elantech models that use a different
* set of magic numbers
*/
- if (param[0] != 0x3c || param[1] != 0x03 || param[2] != 0xc8) {
+ if (param[0] != 0x3c || param[1] != 0x03 ||
+ (param[2] != 0xc8 && param[2] != 0x00)) {
pr_debug("unexpected magic knock result 0x%02x, 0x%02x, 0x%02x.\n",
param[0], param[1], param[2]);
return -1;
@@ -793,16 +957,16 @@ static int elantech_reconnect(struct psmouse *psmouse)
/*
* determine hardware version and set some properties according to it.
*/
-static void elantech_set_properties(struct elantech_data *etd)
+static int elantech_set_properties(struct elantech_data *etd)
{
- /*
- * Assume every version greater than 0x020030 is new EeePC style
- * hardware with 6 byte packets, except 0x020600
- */
if (etd->fw_version < 0x020030 || etd->fw_version == 0x020600)
etd->hw_version = 1;
- else
+ else if (etd->fw_version < 0x150600)
etd->hw_version = 2;
+ else if ((etd->fw_version & 0x0f0000) >> 16 == 5)
+ etd->hw_version = 3;
+ else
+ return -1;
/*
* Turn on packet checking by default.
@@ -817,13 +981,15 @@ static void elantech_set_properties(struct elantech_data *etd)
etd->jumpy_cursor =
(etd->fw_version == 0x020022 || etd->fw_version == 0x020600);
- if (etd->hw_version == 2) {
+ if (etd->hw_version > 1) {
/* For now show extra debug information */
etd->debug = 1;
if (etd->fw_version >= 0x020800)
etd->reports_pressure = true;
}
+
+ return 0;
}
/*
@@ -850,9 +1016,12 @@ int elantech_init(struct psmouse *psmouse)
pr_err("failed to query firmware version.\n");
goto init_fail;
}
-
etd->fw_version = (param[0] << 16) | (param[1] << 8) | param[2];
- elantech_set_properties(etd);
+
+ if (elantech_set_properties(etd)) {
+ pr_err("unknown hardware version, aborting...\n");
+ goto init_fail;
+ }
pr_info("assuming hardware version %d "
"(with firmware version 0x%02x%02x%02x)\n",
etd->hw_version, param[0], param[1], param[2]);
@@ -871,7 +1040,10 @@ int elantech_init(struct psmouse *psmouse)
goto init_fail;
}
- elantech_set_input_params(psmouse);
+ if (elantech_set_input_params(psmouse)) {
+ pr_err("failed to query touchpad range.\n");
+ goto init_fail;
+ }
error = sysfs_create_group(&psmouse->ps2dev.serio->dev.kobj,
&elantech_attr_group);
@@ -883,7 +1055,7 @@ int elantech_init(struct psmouse *psmouse)
psmouse->protocol_handler = elantech_process_byte;
psmouse->disconnect = elantech_disconnect;
psmouse->reconnect = elantech_reconnect;
- psmouse->pktsize = etd->hw_version == 2 ? 6 : 4;
+ psmouse->pktsize = etd->hw_version > 1 ? 6 : 4;
return 0;
diff --git a/drivers/input/mouse/elantech.h b/drivers/input/mouse/elantech.h
index d9e6144..236c33c 100644
--- a/drivers/input/mouse/elantech.h
+++ b/drivers/input/mouse/elantech.h
@@ -16,6 +16,7 @@
/*
* Command values for Synaptics style queries
*/
+#define ETP_FW_ID_QUERY 0x00
#define ETP_FW_VERSION_QUERY 0x01
#define ETP_CAPABILITIES_QUERY 0x02
@@ -24,6 +25,7 @@
*/
#define ETP_REGISTER_READ 0x10
#define ETP_REGISTER_WRITE 0x11
+#define ETP_REGISTER_READWRITE 0x00
/*
* Hardware version 2 custom PS/2 command value
@@ -79,6 +81,14 @@
#define ETP_WMIN_V2 0
#define ETP_WMAX_V2 15
+/*
+ * v3 hardware has 2 kinds of packet types.
+ */
+#define PACKET_UNKNOWN 0x01
+#define PACKET_DEBOUNCE 0x02
+#define PACKET_V3_HEAD 0x03
+#define PACKET_V3_TAIL 0x04
+
struct elantech_data {
unsigned char reg_10;
unsigned char reg_11;
@@ -98,6 +108,8 @@ struct elantech_data {
unsigned int fw_version;
unsigned int single_finger_reports;
unsigned int y_max;
+ unsigned int prev_x;
+ unsigned int prev_y;
unsigned char parity[256];
};
--
1.7.4.1
^ permalink raw reply related [flat|nested] 14+ messages in thread* Re: [PATCH v2 7/7] Input: elantech - add v3 hardware support
2011-08-24 5:44 ` [PATCH v2 7/7] Input: elantech - add v3 hardware support JJ Ding
@ 2011-08-24 14:35 ` Seth Forshee
2011-08-25 1:09 ` JJ Ding
0 siblings, 1 reply; 14+ messages in thread
From: Seth Forshee @ 2011-08-24 14:35 UTC (permalink / raw)
To: JJ Ding
Cc: linux-input, linux-kernel, Dmitry Torokhov, Aaron Huang, Tom Lin,
Éric Piel, Daniel Kurtz, Chase Douglas, Henrik Rydberg,
Alessandro Rubini
On Wed, Aug 24, 2011 at 01:44:46PM +0800, JJ Ding wrote:
> @@ -403,11 +503,39 @@ static int elantech_packet_check_v2(struct psmouse *psmouse)
> }
>
> /*
> + * We check the constant bits to determine what packet type we get,
> + * so packet checking is mandatory for v3 hardware.
> + */
> +static int elantech_packet_check_v3(struct psmouse *psmouse)
> +{
> + unsigned char *packet = psmouse->packet;
> +
> + if ((packet[0] & 0x0c) == 0x04 &&
> + (packet[3] & 0xcf) == 0x02)
> + return PACKET_V3_HEAD;
> +
> + if ((packet[0] & 0x0c) == 0x0c &&
> + (packet[3] & 0xce) == 0x0c)
> + return PACKET_V3_TAIL;
> +
> + if (packet[0] == 0xc4 &&
> + packet[1] == 0xff &&
> + packet[2] == 0xff &&
> + packet[3] == 0x02 &&
> + packet[4] == 0xff &&
> + packet[5] == 0xff)
> + return PACKET_DEBOUNCE;
> +
> + return PACKET_UNKNOWN;
> +}
This will never return PACKET_DEBOUNCE, because those packets will have
already matched the conditions for PACKET_V3_HEAD. That condition needs
to be moved to the top of the function.
Seth
^ permalink raw reply [flat|nested] 14+ messages in thread* Re: [PATCH v2 7/7] Input: elantech - add v3 hardware support
2011-08-24 14:35 ` Seth Forshee
@ 2011-08-25 1:09 ` JJ Ding
2011-08-25 7:06 ` Dmitry Torokhov
0 siblings, 1 reply; 14+ messages in thread
From: JJ Ding @ 2011-08-25 1:09 UTC (permalink / raw)
To: Seth Forshee
Cc: linux-input, linux-kernel, Dmitry Torokhov, Aaron Huang, Tom Lin,
Éric Piel, Daniel Kurtz, Chase Douglas, Henrik Rydberg,
Alessandro Rubini
Hi Seth,
Thank you. You are right.
I think I somehow tested the worng touchpad for this patch.
jj
On Wed, 24 Aug 2011 09:35:20 -0500, Seth Forshee <seth.forshee@canonical.com> wrote:
> On Wed, Aug 24, 2011 at 01:44:46PM +0800, JJ Ding wrote:
> > @@ -403,11 +503,39 @@ static int elantech_packet_check_v2(struct psmouse *psmouse)
> > }
> >
> > /*
> > + * We check the constant bits to determine what packet type we get,
> > + * so packet checking is mandatory for v3 hardware.
> > + */
> > +static int elantech_packet_check_v3(struct psmouse *psmouse)
> > +{
> > + unsigned char *packet = psmouse->packet;
> > +
> > + if ((packet[0] & 0x0c) == 0x04 &&
> > + (packet[3] & 0xcf) == 0x02)
> > + return PACKET_V3_HEAD;
> > +
> > + if ((packet[0] & 0x0c) == 0x0c &&
> > + (packet[3] & 0xce) == 0x0c)
> > + return PACKET_V3_TAIL;
> > +
> > + if (packet[0] == 0xc4 &&
> > + packet[1] == 0xff &&
> > + packet[2] == 0xff &&
> > + packet[3] == 0x02 &&
> > + packet[4] == 0xff &&
> > + packet[5] == 0xff)
> > + return PACKET_DEBOUNCE;
> > +
> > + return PACKET_UNKNOWN;
> > +}
>
> This will never return PACKET_DEBOUNCE, because those packets will have
> already matched the conditions for PACKET_V3_HEAD. That condition needs
> to be moved to the top of the function.
>
> Seth
^ permalink raw reply [flat|nested] 14+ messages in thread* Re: [PATCH v2 7/7] Input: elantech - add v3 hardware support
2011-08-25 1:09 ` JJ Ding
@ 2011-08-25 7:06 ` Dmitry Torokhov
2011-08-25 8:22 ` JJ Ding
0 siblings, 1 reply; 14+ messages in thread
From: Dmitry Torokhov @ 2011-08-25 7:06 UTC (permalink / raw)
To: JJ Ding
Cc: Seth Forshee, linux-input, linux-kernel, Aaron Huang, Tom Lin,
Éric Piel, Daniel Kurtz, Chase Douglas, Henrik Rydberg,
Alessandro Rubini
On Thu, Aug 25, 2011 at 09:09:02AM +0800, JJ Ding wrote:
> Hi Seth,
>
> Thank you. You are right.
> I think I somehow tested the worng touchpad for this patch.
>
How about we change it thusly:
Input: elamtech - fix V3 packet checking
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
drivers/input/mouse/elantech.c | 18 ++++++------------
1 files changed, 6 insertions(+), 12 deletions(-)
diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c
index 1e2b9da..d814bf74 100644
--- a/drivers/input/mouse/elantech.c
+++ b/drivers/input/mouse/elantech.c
@@ -508,24 +508,18 @@ static int elantech_packet_check_v2(struct psmouse *psmouse)
*/
static int elantech_packet_check_v3(struct psmouse *psmouse)
{
+ const u8 debounce_packet[] = { 0xc4, 0xff, 0xff, 0x02, 0xff, 0xff };
unsigned char *packet = psmouse->packet;
- if ((packet[0] & 0x0c) == 0x04 &&
- (packet[3] & 0xcf) == 0x02)
+ if (!memcmp(packet, debounce_packet, sizeof(debounce_packet)))
+ return PACKET_DEBOUNCE;
+
+ if ((packet[0] & 0x0c) == 0x04 && (packet[3] & 0xcf) == 0x02)
return PACKET_V3_HEAD;
- if ((packet[0] & 0x0c) == 0x0c &&
- (packet[3] & 0xce) == 0x0c)
+ if ((packet[0] & 0x0c) == 0x0c && (packet[3] & 0xce) == 0x0c)
return PACKET_V3_TAIL;
- if (packet[0] == 0xc4 &&
- packet[1] == 0xff &&
- packet[2] == 0xff &&
- packet[3] == 0x02 &&
- packet[4] == 0xff &&
- packet[5] == 0xff)
- return PACKET_DEBOUNCE;
-
return PACKET_UNKNOWN;
}
Thanks.
--
Dmitry
^ permalink raw reply related [flat|nested] 14+ messages in thread* Re: [PATCH v2 7/7] Input: elantech - add v3 hardware support
2011-08-25 7:06 ` Dmitry Torokhov
@ 2011-08-25 8:22 ` JJ Ding
0 siblings, 0 replies; 14+ messages in thread
From: JJ Ding @ 2011-08-25 8:22 UTC (permalink / raw)
To: Dmitry Torokhov
Cc: Seth Forshee, linux-input, linux-kernel, Aaron Huang, Tom Lin,
Éric Piel, Daniel Kurtz, Chase Douglas, Henrik Rydberg,
Alessandro Rubini
Hi Dmitry,
Much cleaner. Thank you.
I will change it.
jj
On Thu, 25 Aug 2011 00:06:42 -0700, Dmitry Torokhov <dmitry.torokhov@gmail.com> wrote:
> On Thu, Aug 25, 2011 at 09:09:02AM +0800, JJ Ding wrote:
> > Hi Seth,
> >
> > Thank you. You are right.
> > I think I somehow tested the worng touchpad for this patch.
> >
>
> How about we change it thusly:
>
> Input: elamtech - fix V3 packet checking
>
> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
> ---
>
> drivers/input/mouse/elantech.c | 18 ++++++------------
> 1 files changed, 6 insertions(+), 12 deletions(-)
>
>
> diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c
> index 1e2b9da..d814bf74 100644
> --- a/drivers/input/mouse/elantech.c
> +++ b/drivers/input/mouse/elantech.c
> @@ -508,24 +508,18 @@ static int elantech_packet_check_v2(struct psmouse *psmouse)
> */
> static int elantech_packet_check_v3(struct psmouse *psmouse)
> {
> + const u8 debounce_packet[] = { 0xc4, 0xff, 0xff, 0x02, 0xff, 0xff };
> unsigned char *packet = psmouse->packet;
>
> - if ((packet[0] & 0x0c) == 0x04 &&
> - (packet[3] & 0xcf) == 0x02)
> + if (!memcmp(packet, debounce_packet, sizeof(debounce_packet)))
> + return PACKET_DEBOUNCE;
> +
> + if ((packet[0] & 0x0c) == 0x04 && (packet[3] & 0xcf) == 0x02)
> return PACKET_V3_HEAD;
>
> - if ((packet[0] & 0x0c) == 0x0c &&
> - (packet[3] & 0xce) == 0x0c)
> + if ((packet[0] & 0x0c) == 0x0c && (packet[3] & 0xce) == 0x0c)
> return PACKET_V3_TAIL;
>
> - if (packet[0] == 0xc4 &&
> - packet[1] == 0xff &&
> - packet[2] == 0xff &&
> - packet[3] == 0x02 &&
> - packet[4] == 0xff &&
> - packet[5] == 0xff)
> - return PACKET_DEBOUNCE;
> -
> return PACKET_UNKNOWN;
> }
>
> Thanks.
>
> --
> Dmitry
^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH v2 7/7] Input: elantech - add v3 hardware support
2011-08-24 5:38 [PATCH v2 0/7] Input: elantech: add support for newer hardware JJ Ding
@ 2011-08-24 5:38 ` JJ Ding
0 siblings, 0 replies; 14+ messages in thread
From: JJ Ding @ 2011-08-24 5:38 UTC (permalink / raw)
To: linux-input, linux-kernel
Cc: Seth Forshee, Dmitry Torokhov, Aaron Huang, Tom Lin,
Éric Piel, Daniel Kurtz, Chase Douglas, Henrik Rydberg,
Alessandro Rubini, JJ Ding
v3 hardware's packet format is almost identical to v2 (one/three finger touch),
except when sensing two finger touch, the hardware sends 12 bytes of data.
Signed-off-by: JJ Ding <jj_ding@emc.com.tw>
---
Documentation/input/elantech.txt | 117 +++++++++++++++++++---
drivers/input/mouse/elantech.c | 204 +++++++++++++++++++++++++++++++++++---
drivers/input/mouse/elantech.h | 12 +++
3 files changed, 305 insertions(+), 28 deletions(-)
diff --git a/Documentation/input/elantech.txt b/Documentation/input/elantech.txt
index bce9941..cee08ee 100644
--- a/Documentation/input/elantech.txt
+++ b/Documentation/input/elantech.txt
@@ -16,15 +16,22 @@ Contents
1. Introduction
2. Extra knobs
- 3. Hardware version 1
- 3.1 Registers
- 3.2 Native relative mode 4 byte packet format
- 3.3 Native absolute mode 4 byte packet format
- 4. Hardware version 2
+ 3. Differentiating hardware versions
+ 4. Hardware version 1
4.1 Registers
- 4.2 Native absolute mode 6 byte packet format
- 4.2.1 One finger touch
- 4.2.2 Two finger touch
+ 4.2 Native relative mode 4 byte packet format
+ 4.3 Native absolute mode 4 byte packet format
+ 5. Hardware version 2
+ 5.1 Registers
+ 5.2 Native absolute mode 6 byte packet format
+ 5.2.1 Parity checking and packet re-synchronization
+ 5.2.2 One/Three finger touch
+ 5.2.3 Two finger touch
+ 6. Hardware version 3
+ 6.1 Registers
+ 6.2 Native absolute mode 6 byte packet format
+ 6.2.1 One/Three finger touch
+ 6.2.2 Two finger touch
@@ -375,7 +382,7 @@ For all the other ones, there are just a few constant bits:
In case an error is detected, all the packets are shifted by one (and packet[0] is discarded).
-5.2.1 One/Three finger touch
+5.2.2 One/Three finger touch
~~~~~~~~~~~~~~~~
byte 0:
@@ -384,7 +391,7 @@ byte 0:
n1 n0 w3 w2 . . R L
L, R = 1 when Left, Right mouse button pressed
- n1..n0 = numbers of fingers on touchpad
+ n1..n0 = number of fingers on touchpad
byte 1:
@@ -432,7 +439,7 @@ byte 5:
y11..y0 = absolute y value (vertical)
-4.2.2 Two finger touch
+5.2.3 Two finger touch
~~~~~~~~~~~~~~~~
Note that the two pairs of coordinates are not exactly the coordinates of the
@@ -446,7 +453,7 @@ byte 0:
n1 n0 ay8 ax8 . . R L
L, R = 1 when Left, Right mouse button pressed
- n1..n0 = numbers of fingers on touchpad
+ n1..n0 = number of fingers on touchpad
byte 1:
@@ -480,3 +487,89 @@ byte 5:
by7 by8 by5 by4 by3 by2 by1 by0
by8..by0 = upper-right finger absolute y value
+
+/////////////////////////////////////////////////////////////////////////////
+
+6. Hardware version 3
+ ==================
+
+6.1 Registers
+ ~~~~~~~~~
+* reg_10
+
+ bit 7 6 5 4 3 2 1 0
+ 0 0 0 0 0 0 0 A
+
+ A: 1 = enable absolute tracking
+
+6.2 Native absolute mode 6 byte packet format
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+1 and 3 finger touch shares the same 6-byte packet format, except that
+3 finger touch only reports the position of the center of all three fingers.
+
+Firmware would send 12 bytes of data for 2 finger touch.
+
+Note on debounce:
+In case the box has unstable power supply or other electricity issues, or
+when number of finger changes, F/W would send "debounce packet" to inform
+driver that the hardware is in debounce status.
+The debouce packet has the following signature:
+ byte 0: 0xc4
+ byte 1: 0xff
+ byte 2: 0xff
+ byte 3: 0x02
+ byte 4: 0xff
+ byte 5: 0xff
+When we encounter this kind of packet, we just ignore it.
+
+6.2.1 One/Three finger touch
+ ~~~~~~~~~~~~~~~~~~~~~~
+
+byte 0:
+
+ bit 7 6 5 4 3 2 1 0
+ n1 n0 w3 w2 0 1 R L
+
+ L, R = 1 when Left, Right mouse button pressed
+ n1..n0 = number of fingers on touchpad
+
+byte 1:
+
+ bit 7 6 5 4 3 2 1 0
+ p7 p6 p5 p4 x11 x10 x9 x8
+
+byte 2:
+
+ bit 7 6 5 4 3 2 1 0
+ x7 x6 x5 x4 x3 x2 x1 x0
+
+ x11..x0 = absolute x value (horizontal)
+
+byte 3:
+
+ bit 7 6 5 4 3 2 1 0
+ 0 0 w1 w0 0 0 1 0
+
+ w3..w0 = width of the finger touch
+
+byte 4:
+
+ bit 7 6 5 4 3 2 1 0
+ p3 p1 p2 p0 y11 y10 y9 y8
+
+ p7..p0 = pressure
+
+byte 5:
+
+ bit 7 6 5 4 3 2 1 0
+ y7 y6 y5 y4 y3 y2 y1 y0
+
+ y11..y0 = absolute y value (vertical)
+
+6.2.2 Two finger touch
+ ~~~~~~~~~~~~~~~~
+
+The packet format is exactly the same for two finger touch, except the hardware
+sends two 6 byte packets. The first packet contains data for the first finger,
+the second packet has data for the second finger. So for two finger touch a
+total of 12 bytes are sent.
diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c
index 2ae7c49..6acecf7 100644
--- a/drivers/input/mouse/elantech.c
+++ b/drivers/input/mouse/elantech.c
@@ -108,6 +108,16 @@ static int elantech_read_reg(struct psmouse *psmouse, unsigned char reg,
rc = -1;
}
break;
+
+ case 3:
+ if (elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) ||
+ elantech_ps2_command(psmouse, NULL, ETP_REGISTER_READWRITE) ||
+ elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) ||
+ elantech_ps2_command(psmouse, NULL, reg) ||
+ elantech_ps2_command(psmouse, param, PSMOUSE_CMD_GETINFO)) {
+ rc = -1;
+ }
+ break;
}
if (rc)
@@ -154,6 +164,18 @@ static int elantech_write_reg(struct psmouse *psmouse, unsigned char reg,
rc = -1;
}
break;
+
+ case 3:
+ if (elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) ||
+ elantech_ps2_command(psmouse, NULL, ETP_REGISTER_READWRITE) ||
+ elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) ||
+ elantech_ps2_command(psmouse, NULL, reg) ||
+ elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) ||
+ elantech_ps2_command(psmouse, NULL, val) ||
+ elantech_ps2_command(psmouse, NULL, PSMOUSE_CMD_SETSCALE11)) {
+ rc = -1;
+ }
+ break;
}
if (rc)
@@ -350,6 +372,84 @@ static void elantech_report_absolute_v2(struct psmouse *psmouse)
input_sync(dev);
}
+/*
+ * Interpret complete data packets and report absolute mode input events for
+ * hardware version 3. (12 byte packets for two fingers)
+ */
+static void elantech_report_absolute_v3(struct psmouse *psmouse,
+ int packet_type)
+{
+ struct input_dev *dev = psmouse->dev;
+ struct elantech_data *etd = psmouse->private;
+ unsigned char *packet = psmouse->packet;
+ unsigned int fingers = 0, x1 = 0, y1 = 0, x2 = 0, y2 = 0;
+ unsigned int width = 0, pres = 0;
+
+ /* byte 0: n1 n0 . . . . R L */
+ fingers = (packet[0] & 0xc0) >> 6;
+
+ switch (fingers) {
+ case 3:
+ case 1:
+ /*
+ * byte 1: . . . . x11 x10 x9 x8
+ * byte 2: x7 x6 x5 x4 x4 x2 x1 x0
+ */
+ x1 = ((packet[1] & 0x0f) << 8) | packet[2];
+ /*
+ * byte 4: . . . . y11 y10 y9 y8
+ * byte 5: y7 y6 y5 y4 y3 y2 y1 y0
+ */
+ y1 = etd->y_max - (((packet[4] & 0x0f) << 8) | packet[5]);
+ break;
+
+ case 2:
+ if (packet_type == PACKET_V3_HEAD) {
+ /*
+ * byte 1: . . . . ax11 ax10 ax9 ax8
+ * byte 2: ax7 ax6 ax5 ax4 ax3 ax2 ax1 ax0
+ */
+ etd->prev_x = ((packet[1] & 0x0f) << 8) | packet[2];
+ /*
+ * byte 4: . . . . ay11 ay10 ay9 ay8
+ * byte 5: ay7 ay6 ay5 ay4 ay3 ay2 ay1 ay0
+ */
+ etd->prev_y = etd->y_max -
+ (((packet[4] & 0x0f) << 8) | packet[5]);
+ /*
+ * wait for next packet
+ */
+ return;
+ }
+
+ /* packet_type == PACKET_V3_TAIL */
+ x1 = etd->prev_x;
+ y1 = etd->prev_y;
+ x2 = ((packet[1] & 0x0f) << 8) | packet[2];
+ y2 = etd->y_max - (((packet[4] & 0x0f) << 8) | packet[5]);
+ break;
+ }
+
+ pres = (packet[1] & 0xf0) | ((packet[4] & 0xf0) >> 4);
+ width = ((packet[0] & 0x30) >> 2) | ((packet[3] & 0x30) >> 4);
+
+ input_report_key(dev, BTN_TOUCH, fingers != 0);
+ if (fingers != 0) {
+ input_report_abs(dev, ABS_X, x1);
+ input_report_abs(dev, ABS_Y, y1);
+ }
+ elantech_report_semi_mt_data(dev, fingers, x1, y1, x2, y2);
+ input_report_key(dev, BTN_TOOL_FINGER, fingers == 1);
+ input_report_key(dev, BTN_TOOL_DOUBLETAP, fingers == 2);
+ input_report_key(dev, BTN_TOOL_TRIPLETAP, fingers == 3);
+ input_report_key(dev, BTN_LEFT, packet[0] & 0x01);
+ input_report_key(dev, BTN_RIGHT, packet[0] & 0x02);
+ input_report_abs(dev, ABS_PRESSURE, pres);
+ input_report_abs(dev, ABS_TOOL_WIDTH, width);
+
+ input_sync(dev);
+}
+
static int elantech_packet_check_v1(struct psmouse *psmouse)
{
struct elantech_data *etd = psmouse->private;
@@ -403,11 +503,39 @@ static int elantech_packet_check_v2(struct psmouse *psmouse)
}
/*
+ * We check the constant bits to determine what packet type we get,
+ * so packet checking is mandatory for v3 hardware.
+ */
+static int elantech_packet_check_v3(struct psmouse *psmouse)
+{
+ unsigned char *packet = psmouse->packet;
+
+ if ((packet[0] & 0x0c) == 0x04 &&
+ (packet[3] & 0xcf) == 0x02)
+ return PACKET_V3_HEAD;
+
+ if ((packet[0] & 0x0c) == 0x0c &&
+ (packet[3] & 0xce) == 0x0c)
+ return PACKET_V3_TAIL;
+
+ if (packet[0] == 0xc4 &&
+ packet[1] == 0xff &&
+ packet[2] == 0xff &&
+ packet[3] == 0x02 &&
+ packet[4] == 0xff &&
+ packet[5] == 0xff)
+ return PACKET_DEBOUNCE;
+
+ return PACKET_UNKNOWN;
+}
+
+/*
* Process byte stream from mouse and handle complete packets
*/
static psmouse_ret_t elantech_process_byte(struct psmouse *psmouse)
{
struct elantech_data *etd = psmouse->private;
+ int packet_type;
if (psmouse->pktcnt < psmouse->pktsize)
return PSMOUSE_GOOD_DATA;
@@ -429,6 +557,18 @@ static psmouse_ret_t elantech_process_byte(struct psmouse *psmouse)
elantech_report_absolute_v2(psmouse);
break;
+
+ case 3:
+ packet_type = elantech_packet_check_v3(psmouse);
+ /* ignore debounce */
+ if (packet_type == PACKET_DEBOUNCE)
+ return PSMOUSE_FULL_PACKET;
+
+ if (packet_type == PACKET_UNKNOWN)
+ return PSMOUSE_BAD_DATA;
+
+ elantech_report_absolute_v3(psmouse, packet_type);
+ break;
}
return PSMOUSE_FULL_PACKET;
@@ -463,8 +603,15 @@ static int elantech_set_absolute_mode(struct psmouse *psmouse)
elantech_write_reg(psmouse, 0x11, etd->reg_11) ||
elantech_write_reg(psmouse, 0x21, etd->reg_21)) {
rc = -1;
- break;
}
+ break;
+
+ case 3:
+ etd->reg_10 = 0x0b;
+ if (elantech_write_reg(psmouse, 0x10, etd->reg_10))
+ rc = -1;
+
+ break;
}
if (rc == 0) {
@@ -498,11 +645,12 @@ static int elantech_set_absolute_mode(struct psmouse *psmouse)
return rc;
}
-static void set_range(struct psmouse *psmouse, unsigned int *x_min,
+static int set_range(struct psmouse *psmouse, unsigned int *x_min,
unsigned int *y_min, unsigned int *x_max,
unsigned int *y_max)
{
struct elantech_data *etd = psmouse->private;
+ unsigned char param[3];
int i;
switch (etd->hw_version) {
@@ -530,19 +678,30 @@ static void set_range(struct psmouse *psmouse, unsigned int *x_min,
*y_max = (etd->capabilities[2] - i) * 64;
}
break;
+
+ case 3:
+ if (synaptics_send_cmd(psmouse, ETP_FW_ID_QUERY, param))
+ return -1;
+
+ *x_max = (0x0f & param[0]) << 8 | param[1];
+ *y_max = (0xf0 & param[0]) << 4 | param[2];
+ break;
}
+
+ return 0;
}
/*
* Set the appropriate event bits for the input subsystem
*/
-static void elantech_set_input_params(struct psmouse *psmouse)
+static int elantech_set_input_params(struct psmouse *psmouse)
{
struct input_dev *dev = psmouse->dev;
struct elantech_data *etd = psmouse->private;
unsigned int x_min = 0, y_min = 0, x_max = 0, y_max = 0;
- set_range(psmouse, &x_min, &y_min, &x_max, &y_max);
+ if (set_range(psmouse, &x_min, &y_min, &x_max, &y_max))
+ return -1;
__set_bit(EV_KEY, dev->evbit);
__set_bit(EV_ABS, dev->evbit);
@@ -570,6 +729,8 @@ static void elantech_set_input_params(struct psmouse *psmouse)
case 2:
__set_bit(BTN_TOOL_QUADTAP, dev->keybit);
+ /* fall through */
+ case 3:
input_set_abs_params(dev, ABS_X, x_min, x_max, 0, 0);
input_set_abs_params(dev, ABS_Y, y_min, y_max, 0, 0);
if (etd->reports_pressure) {
@@ -586,6 +747,8 @@ static void elantech_set_input_params(struct psmouse *psmouse)
}
etd->y_max = y_max;
+
+ return 0;
}
struct elantech_attr_data {
@@ -727,7 +890,8 @@ int elantech_detect(struct psmouse *psmouse, bool set_properties)
* Report this in case there are Elantech models that use a different
* set of magic numbers
*/
- if (param[0] != 0x3c || param[1] != 0x03 || param[2] != 0xc8) {
+ if (param[0] != 0x3c || param[1] != 0x03 ||
+ (param[2] != 0xc8 && param[2] != 0x00)) {
pr_debug("unexpected magic knock result 0x%02x, 0x%02x, 0x%02x.\n",
param[0], param[1], param[2]);
return -1;
@@ -793,16 +957,16 @@ static int elantech_reconnect(struct psmouse *psmouse)
/*
* determine hardware version and set some properties according to it.
*/
-static void elantech_set_properties(struct elantech_data *etd)
+static int elantech_set_properties(struct elantech_data *etd)
{
- /*
- * Assume every version greater than 0x020030 is new EeePC style
- * hardware with 6 byte packets, except 0x020600
- */
if (etd->fw_version < 0x020030 || etd->fw_version == 0x020600)
etd->hw_version = 1;
- else
+ else if (etd->fw_version < 0x150600)
etd->hw_version = 2;
+ else if ((etd->fw_version & 0x0f0000) >> 16 == 5)
+ etd->hw_version = 3;
+ else
+ return -1;
/*
* Turn on packet checking by default.
@@ -817,13 +981,15 @@ static void elantech_set_properties(struct elantech_data *etd)
etd->jumpy_cursor =
(etd->fw_version == 0x020022 || etd->fw_version == 0x020600);
- if (etd->hw_version == 2) {
+ if (etd->hw_version > 1) {
/* For now show extra debug information */
etd->debug = 1;
if (etd->fw_version >= 0x020800)
etd->reports_pressure = true;
}
+
+ return 0;
}
/*
@@ -850,9 +1016,12 @@ int elantech_init(struct psmouse *psmouse)
pr_err("failed to query firmware version.\n");
goto init_fail;
}
-
etd->fw_version = (param[0] << 16) | (param[1] << 8) | param[2];
- elantech_set_properties(etd);
+
+ if (elantech_set_properties(etd)) {
+ pr_err("unknown hardware version, aborting...\n");
+ goto init_fail;
+ }
pr_info("assuming hardware version %d "
"(with firmware version 0x%02x%02x%02x)\n",
etd->hw_version, param[0], param[1], param[2]);
@@ -871,7 +1040,10 @@ int elantech_init(struct psmouse *psmouse)
goto init_fail;
}
- elantech_set_input_params(psmouse);
+ if (elantech_set_input_params(psmouse)) {
+ pr_err("failed to query touchpad range.\n");
+ goto init_fail;
+ }
error = sysfs_create_group(&psmouse->ps2dev.serio->dev.kobj,
&elantech_attr_group);
@@ -883,7 +1055,7 @@ int elantech_init(struct psmouse *psmouse)
psmouse->protocol_handler = elantech_process_byte;
psmouse->disconnect = elantech_disconnect;
psmouse->reconnect = elantech_reconnect;
- psmouse->pktsize = etd->hw_version == 2 ? 6 : 4;
+ psmouse->pktsize = etd->hw_version > 1 ? 6 : 4;
return 0;
diff --git a/drivers/input/mouse/elantech.h b/drivers/input/mouse/elantech.h
index d9e6144..236c33c 100644
--- a/drivers/input/mouse/elantech.h
+++ b/drivers/input/mouse/elantech.h
@@ -16,6 +16,7 @@
/*
* Command values for Synaptics style queries
*/
+#define ETP_FW_ID_QUERY 0x00
#define ETP_FW_VERSION_QUERY 0x01
#define ETP_CAPABILITIES_QUERY 0x02
@@ -24,6 +25,7 @@
*/
#define ETP_REGISTER_READ 0x10
#define ETP_REGISTER_WRITE 0x11
+#define ETP_REGISTER_READWRITE 0x00
/*
* Hardware version 2 custom PS/2 command value
@@ -79,6 +81,14 @@
#define ETP_WMIN_V2 0
#define ETP_WMAX_V2 15
+/*
+ * v3 hardware has 2 kinds of packet types.
+ */
+#define PACKET_UNKNOWN 0x01
+#define PACKET_DEBOUNCE 0x02
+#define PACKET_V3_HEAD 0x03
+#define PACKET_V3_TAIL 0x04
+
struct elantech_data {
unsigned char reg_10;
unsigned char reg_11;
@@ -98,6 +108,8 @@ struct elantech_data {
unsigned int fw_version;
unsigned int single_finger_reports;
unsigned int y_max;
+ unsigned int prev_x;
+ unsigned int prev_y;
unsigned char parity[256];
};
--
1.7.4.1
^ permalink raw reply related [flat|nested] 14+ messages in thread