Re: [RFC] Adding the A64FX's HPC funtions.

["Alex Bennée" <alex.bennee@linaro.org>]

Peter Maydell <peter.maydell@linaro.org> writes:

> On Fri, 4 Jun 2021 at 09:29, ishii.shuuichir@fujitsu.com
> <ishii.shuuichir@fujitsu.com> wrote:
>>
>> Hi, Richard.
>>
>> > Well, Peter disagreed with having them enabled by default in -cpu max, so we
>> > might need at least one extra property.  I see no reason to have three
>> > properties -- one property a64fx-hpc should be sufficient.  But we might not
>> > want any command-line properties, see below...
>>
>> I understood.
>>
>> > For comparison, in the Arm Cortex-A76 manual,
>> >    https://developer.arm.com/documentation/100798/0301/
>> > section B2.4 "AArch64 registers by functional group", there is a concise
>> > listing of all of the system registers and their reset values.
>>
>> Thank you for the information.
>>
>> > The most important of these for QEMU to create '-cpu a64fx' are the
>> > ID_AA64{ISAR,MMFR,PFR} and MIDR values.  These values determine all of
>> > the
>> > standard architectural features,
>>
>> The values of ID_AA64{ISAR,MMFR,PFR} and MIDR are not listed in the specifications published at this time.
>> Of course, they are listed in the A64FX specification document managed within Fujitsu,
>> but we cannot tell how far these setting values can be disclosed
>> without checking with the A64FX specification staff within Fujitsu.
>
> If somebody has access to A64 hardware they could write a minor kernel
> patch to just print the values...

We do have access to some a64fx hardware I think... or at least there is
some in the lab that tcwg can get access to.

>
> -- PMM


-- 
Alex Bennée