From: Gregory CLEMENT <gregory.clement@free-electrons.com>
To: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Andrew Lunn <andrew@lunn.ch>, Jason Cooper <jason@lakedaemon.net>,
linux-clk@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
Rob Herring <robh+dt@kernel.org>, Pawel Moll <pawel.moll@arm.com>,
Mark Rutland <mark.rutland@arm.com>,
Ian Campbell <ijc+devicetree@hellion.org.uk>,
Kumar Gala <galak@codeaurora.org>,
devicetree@vger.kernel.org
Subject: Re: [PATCH v2 1/3] dt-bindings: add Marvell core PLL and clock divider PMU documentation
Date: Mon, 07 Dec 2015 18:37:47 +0100 [thread overview]
Message-ID: <87oae2b1n8.fsf@free-electrons.com> (raw)
In-Reply-To: <E1a5ijC-0007pd-SL@rmk-PC.arm.linux.org.uk> (Russell King's message of "Sun, 06 Dec 2015 23:28:26 +0000")
Hi Russell,
On lun., déc. 07 2015, Russell King <rmk+kernel@arm.linux.org.uk> wrote:
> Add documentation for the Marvell clock divider driver, which is used
> to source clocks for the AXI bus, video decoder, GPU and LCD blocks.
>
> Acked-by: Andrew Lunn <andrew@lunn.ch>
> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
> Acked-by: Rob Herring <robh@kernel.org>
> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Applied on mvebu/dt
Thanks,
Gregory
> ---
> .../bindings/clock/dove-divider-clock.txt | 28 ++++++++++++++++++++++
> 1 file changed, 28 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/clock/dove-divider-clock.txt
>
> diff --git a/Documentation/devicetree/bindings/clock/dove-divider-clock.txt b/Documentation/devicetree/bindings/clock/dove-divider-clock.txt
> new file mode 100644
> index 000000000000..e3eb0f657c5e
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/dove-divider-clock.txt
> @@ -0,0 +1,28 @@
> +PLL divider based Dove clocks
> +
> +Marvell Dove has a 2GHz PLL, which feeds into a set of dividers to provide
> +high speed clocks for a number of peripherals. These dividers are part of
> +the PMU, and thus this node should be a child of the PMU node.
> +
> +The following clocks are provided:
> +
> +ID Clock
> +-------------
> +0 AXI bus clock
> +1 GPU clock
> +2 VMeta clock
> +3 LCD clock
> +
> +Required properties:
> +- compatible : shall be "marvell,dove-divider-clock"
> +- reg : shall be the register address of the Core PLL and Clock Divider
> + Control 0 register. This will cover that register, as well as the
> + Core PLL and Clock Divider Control 1 register. Thus, it will have
> + a size of 8.
> +- #clock-cells : from common clock binding; shall be set to 1
> +
> +divider_clk: core-clock@0064 {
> + compatible = "marvell,dove-divider-clock";
> + reg = <0x0064 0x8>;
> + #clock-cells = <1>;
> +};
> --
> 2.1.0
>
--
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
WARNING: multiple messages have this Message-ID (diff)
From: gregory.clement@free-electrons.com (Gregory CLEMENT)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 1/3] dt-bindings: add Marvell core PLL and clock divider PMU documentation
Date: Mon, 07 Dec 2015 18:37:47 +0100 [thread overview]
Message-ID: <87oae2b1n8.fsf@free-electrons.com> (raw)
In-Reply-To: <E1a5ijC-0007pd-SL@rmk-PC.arm.linux.org.uk> (Russell King's message of "Sun, 06 Dec 2015 23:28:26 +0000")
Hi Russell,
On lun., d?c. 07 2015, Russell King <rmk+kernel@arm.linux.org.uk> wrote:
> Add documentation for the Marvell clock divider driver, which is used
> to source clocks for the AXI bus, video decoder, GPU and LCD blocks.
>
> Acked-by: Andrew Lunn <andrew@lunn.ch>
> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
> Acked-by: Rob Herring <robh@kernel.org>
> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Applied on mvebu/dt
Thanks,
Gregory
> ---
> .../bindings/clock/dove-divider-clock.txt | 28 ++++++++++++++++++++++
> 1 file changed, 28 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/clock/dove-divider-clock.txt
>
> diff --git a/Documentation/devicetree/bindings/clock/dove-divider-clock.txt b/Documentation/devicetree/bindings/clock/dove-divider-clock.txt
> new file mode 100644
> index 000000000000..e3eb0f657c5e
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/dove-divider-clock.txt
> @@ -0,0 +1,28 @@
> +PLL divider based Dove clocks
> +
> +Marvell Dove has a 2GHz PLL, which feeds into a set of dividers to provide
> +high speed clocks for a number of peripherals. These dividers are part of
> +the PMU, and thus this node should be a child of the PMU node.
> +
> +The following clocks are provided:
> +
> +ID Clock
> +-------------
> +0 AXI bus clock
> +1 GPU clock
> +2 VMeta clock
> +3 LCD clock
> +
> +Required properties:
> +- compatible : shall be "marvell,dove-divider-clock"
> +- reg : shall be the register address of the Core PLL and Clock Divider
> + Control 0 register. This will cover that register, as well as the
> + Core PLL and Clock Divider Control 1 register. Thus, it will have
> + a size of 8.
> +- #clock-cells : from common clock binding; shall be set to 1
> +
> +divider_clk: core-clock at 0064 {
> + compatible = "marvell,dove-divider-clock";
> + reg = <0x0064 0x8>;
> + #clock-cells = <1>;
> +};
> --
> 2.1.0
>
--
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
next prev parent reply other threads:[~2015-12-07 17:37 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-12-06 23:28 [PATCH v2 1/3] dt-bindings: add Marvell core PLL and clock divider PMU documentation Russell King
2015-12-06 23:28 ` Russell King
2015-12-07 17:37 ` Gregory CLEMENT [this message]
2015-12-07 17:37 ` Gregory CLEMENT
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87oae2b1n8.fsf@free-electrons.com \
--to=gregory.clement@free-electrons.com \
--cc=andrew@lunn.ch \
--cc=devicetree@vger.kernel.org \
--cc=galak@codeaurora.org \
--cc=ijc+devicetree@hellion.org.uk \
--cc=jason@lakedaemon.net \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=pawel.moll@arm.com \
--cc=rmk+kernel@arm.linux.org.uk \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.