[Devel] [PATCH v4 0/2] Disable FIE on machines with slow counters

[Devel] [PATCH v4 0/2] Disable FIE on machines with slow counters

[Jeremy Linton]

[-- Attachment #1: Type: text/plain, Size: 1252 bytes --]

FIE assumes the delivered/relative perf registers are fast to read so
it goes ahead and hits them quite frequently. On a couple Arm
platforms though they end up in PCC regions which require mailbox
handshaking with other parts of the platform.

This results in a lot of overhead in the cppc_fie task. As such lets
runtime disable FIE if we detect it enabled on one of those platforms.
Also allow the user to manually enable/disable it via a module parameter.

v1->v2:
	Apply Rafael's review comments.
	Move the MODULE_PARAM into the ifdef
	Fix compiler warning when ACPI_CPPC_LIB is disabled.
v2->v3:
	Tristate the module param so FIE can be forced on/off
	Bump pr_debug to pr_info if FIE is disabled due to PCC regions
	Switch ACPI_CPPC_CPUFREQ_FIE off by default
v3->v4:
	No functional change, resend due to email addr issues

Jeremy Linton (2):
  ACPI: CPPC: Disable FIE if registers in PCC regions
  cpufreq: CPPC: Change FIE default

 drivers/acpi/cppc_acpi.c       | 41 ++++++++++++++++++++++++++++++++++
 drivers/cpufreq/Kconfig.arm    |  2 +-
 drivers/cpufreq/cppc_cpufreq.c | 31 +++++++++++++++++++++----
 include/acpi/cppc_acpi.h       |  5 +++++
 4 files changed, 74 insertions(+), 5 deletions(-)

-- 
2.37.1

[PATCH v4 0/2] Disable FIE on machines with slow counters

[Jeremy Linton]

FIE assumes the delivered/relative perf registers are fast to read so
it goes ahead and hits them quite frequently. On a couple Arm
platforms though they end up in PCC regions which require mailbox
handshaking with other parts of the platform.

This results in a lot of overhead in the cppc_fie task. As such lets
runtime disable FIE if we detect it enabled on one of those platforms.
Also allow the user to manually enable/disable it via a module parameter.

v1->v2:
	Apply Rafael's review comments.
	Move the MODULE_PARAM into the ifdef
	Fix compiler warning when ACPI_CPPC_LIB is disabled.
v2->v3:
	Tristate the module param so FIE can be forced on/off
	Bump pr_debug to pr_info if FIE is disabled due to PCC regions
	Switch ACPI_CPPC_CPUFREQ_FIE off by default
v3->v4:
	No functional change, resend due to email addr issues

Jeremy Linton (2):
  ACPI: CPPC: Disable FIE if registers in PCC regions
  cpufreq: CPPC: Change FIE default

 drivers/acpi/cppc_acpi.c       | 41 ++++++++++++++++++++++++++++++++++
 drivers/cpufreq/Kconfig.arm    |  2 +-
 drivers/cpufreq/cppc_cpufreq.c | 31 +++++++++++++++++++++----
 include/acpi/cppc_acpi.h       |  5 +++++
 4 files changed, 74 insertions(+), 5 deletions(-)

-- 
2.37.1

[Devel] [PATCH v4 1/2] ACPI: CPPC: Disable FIE if registers in PCC regions

[Jeremy Linton]

[-- Attachment #1: Type: text/plain, Size: 5769 bytes --]

PCC regions utilize a mailbox to set/retrieve register values used by
the CPPC code. This is fine as long as the operations are
infrequent. With the FIE code enabled though the overhead can range
from 2-11% of system CPU overhead (ex: as measured by top) on Arm
based machines.

So, before enabling FIE assure none of the registers used by
cppc_get_perf_ctrs() are in the PCC region. Furthermore lets also
enable a module parameter which can also disable it at boot or module
reload.

Signed-off-by: Jeremy Linton <jeremy.linton(a)arm.com>
---
 drivers/acpi/cppc_acpi.c       | 41 ++++++++++++++++++++++++++++++++++
 drivers/cpufreq/cppc_cpufreq.c | 31 +++++++++++++++++++++----
 include/acpi/cppc_acpi.h       |  5 +++++
 3 files changed, 73 insertions(+), 4 deletions(-)

diff --git a/drivers/acpi/cppc_acpi.c b/drivers/acpi/cppc_acpi.c
index 1e15a9f25ae9..c840bf606b30 100644
--- a/drivers/acpi/cppc_acpi.c
+++ b/drivers/acpi/cppc_acpi.c
@@ -1240,6 +1240,47 @@ int cppc_get_perf_caps(int cpunum, struct cppc_perf_caps *perf_caps)
 }
 EXPORT_SYMBOL_GPL(cppc_get_perf_caps);
 
+/**
+ * cppc_perf_ctrs_in_pcc - Check if any perf counters are in a PCC region.
+ *
+ * CPPC has flexibility about how counters describing CPU perf are delivered.
+ * One of the choices is PCC regions, which can have a high access latency. This
+ * routine allows callers of cppc_get_perf_ctrs() to know this ahead of time.
+ *
+ * Return: true if any of the counters are in PCC regions, false otherwise
+ */
+bool cppc_perf_ctrs_in_pcc(void)
+{
+	int cpu;
+
+	for_each_present_cpu(cpu) {
+		struct cpc_register_resource *ref_perf_reg;
+		struct cpc_desc *cpc_desc;
+
+		cpc_desc = per_cpu(cpc_desc_ptr, cpu);
+
+		if (CPC_IN_PCC(&cpc_desc->cpc_regs[DELIVERED_CTR]) ||
+		    CPC_IN_PCC(&cpc_desc->cpc_regs[REFERENCE_CTR]) ||
+		    CPC_IN_PCC(&cpc_desc->cpc_regs[CTR_WRAP_TIME]))
+			return true;
+
+
+		ref_perf_reg = &cpc_desc->cpc_regs[REFERENCE_PERF];
+
+		/*
+		 * If reference perf register is not supported then we should
+		 * use the nominal perf value
+		 */
+		if (!CPC_SUPPORTED(ref_perf_reg))
+			ref_perf_reg = &cpc_desc->cpc_regs[NOMINAL_PERF];
+
+		if (CPC_IN_PCC(ref_perf_reg))
+			return true;
+	}
+	return false;
+}
+EXPORT_SYMBOL_GPL(cppc_perf_ctrs_in_pcc);
+
 /**
  * cppc_get_perf_ctrs - Read a CPU's performance feedback counters.
  * @cpunum: CPU from which to read counters.
diff --git a/drivers/cpufreq/cppc_cpufreq.c b/drivers/cpufreq/cppc_cpufreq.c
index 24eaf0ec344d..32fcb0bf74a4 100644
--- a/drivers/cpufreq/cppc_cpufreq.c
+++ b/drivers/cpufreq/cppc_cpufreq.c
@@ -63,7 +63,15 @@ static struct cppc_workaround_oem_info wa_info[] = {
 
 static struct cpufreq_driver cppc_cpufreq_driver;
 
+static enum {
+	FIE_UNSET = -1,
+	FIE_ENABLED,
+	FIE_DISABLED
+} fie_disabled = FIE_UNSET;
+
 #ifdef CONFIG_ACPI_CPPC_CPUFREQ_FIE
+module_param(fie_disabled, int, 0444);
+MODULE_PARM_DESC(fie_disabled, "Disable Frequency Invariance Engine (FIE)");
 
 /* Frequency invariance support */
 struct cppc_freq_invariance {
@@ -158,7 +166,7 @@ static void cppc_cpufreq_cpu_fie_init(struct cpufreq_policy *policy)
 	struct cppc_freq_invariance *cppc_fi;
 	int cpu, ret;
 
-	if (cppc_cpufreq_driver.get == hisi_cppc_cpufreq_get_rate)
+	if (fie_disabled)
 		return;
 
 	for_each_cpu(cpu, policy->cpus) {
@@ -199,7 +207,7 @@ static void cppc_cpufreq_cpu_fie_exit(struct cpufreq_policy *policy)
 	struct cppc_freq_invariance *cppc_fi;
 	int cpu;
 
-	if (cppc_cpufreq_driver.get == hisi_cppc_cpufreq_get_rate)
+	if (fie_disabled)
 		return;
 
 	/* policy->cpus will be empty here, use related_cpus instead */
@@ -229,7 +237,21 @@ static void __init cppc_freq_invariance_init(void)
 	};
 	int ret;
 
-	if (cppc_cpufreq_driver.get == hisi_cppc_cpufreq_get_rate)
+	switch (fie_disabled) {
+	/* honor user request */
+	case FIE_DISABLED:
+	case FIE_ENABLED:
+		break;
+	case FIE_UNSET:
+	default:
+		fie_disabled = FIE_ENABLED;
+		if (cppc_perf_ctrs_in_pcc()) {
+			pr_info("FIE not enabled on systems with registers in PCC\n");
+			fie_disabled = FIE_DISABLED;
+		}
+		break;
+	}
+	if (fie_disabled)
 		return;
 
 	kworker_fie = kthread_create_worker(0, "cppc_fie");
@@ -247,7 +269,7 @@ static void __init cppc_freq_invariance_init(void)
 
 static void cppc_freq_invariance_exit(void)
 {
-	if (cppc_cpufreq_driver.get == hisi_cppc_cpufreq_get_rate)
+	if (fie_disabled)
 		return;
 
 	kthread_destroy_worker(kworker_fie);
@@ -936,6 +958,7 @@ static void cppc_check_hisi_workaround(void)
 		    wa_info[i].oem_revision == tbl->oem_revision) {
 			/* Overwrite the get() callback */
 			cppc_cpufreq_driver.get = hisi_cppc_cpufreq_get_rate;
+			fie_disabled = FIE_DISABLED;
 			break;
 		}
 	}
diff --git a/include/acpi/cppc_acpi.h b/include/acpi/cppc_acpi.h
index f73d357ecdf5..c5614444031f 100644
--- a/include/acpi/cppc_acpi.h
+++ b/include/acpi/cppc_acpi.h
@@ -140,6 +140,7 @@ extern int cppc_get_perf_ctrs(int cpu, struct cppc_perf_fb_ctrs *perf_fb_ctrs);
 extern int cppc_set_perf(int cpu, struct cppc_perf_ctrls *perf_ctrls);
 extern int cppc_set_enable(int cpu, bool enable);
 extern int cppc_get_perf_caps(int cpu, struct cppc_perf_caps *caps);
+extern bool cppc_perf_ctrs_in_pcc(void);
 extern bool acpi_cpc_valid(void);
 extern bool cppc_allow_fast_switch(void);
 extern int acpi_get_psd_map(unsigned int cpu, struct cppc_cpudata *cpu_data);
@@ -173,6 +174,10 @@ static inline int cppc_get_perf_caps(int cpu, struct cppc_perf_caps *caps)
 {
 	return -ENOTSUPP;
 }
+static inline bool cppc_perf_ctrs_in_pcc(void)
+{
+	return false;
+}
 static inline bool acpi_cpc_valid(void)
 {
 	return false;
-- 
2.37.1

[PATCH v4 1/2] ACPI: CPPC: Disable FIE if registers in PCC regions

[Jeremy Linton]

PCC regions utilize a mailbox to set/retrieve register values used by
the CPPC code. This is fine as long as the operations are
infrequent. With the FIE code enabled though the overhead can range
from 2-11% of system CPU overhead (ex: as measured by top) on Arm
based machines.

So, before enabling FIE assure none of the registers used by
cppc_get_perf_ctrs() are in the PCC region. Furthermore lets also
enable a module parameter which can also disable it at boot or module
reload.

Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
---
 drivers/acpi/cppc_acpi.c       | 41 ++++++++++++++++++++++++++++++++++
 drivers/cpufreq/cppc_cpufreq.c | 31 +++++++++++++++++++++----
 include/acpi/cppc_acpi.h       |  5 +++++
 3 files changed, 73 insertions(+), 4 deletions(-)

diff --git a/drivers/acpi/cppc_acpi.c b/drivers/acpi/cppc_acpi.c
index 1e15a9f25ae9..c840bf606b30 100644
--- a/drivers/acpi/cppc_acpi.c
+++ b/drivers/acpi/cppc_acpi.c
@@ -1240,6 +1240,47 @@ int cppc_get_perf_caps(int cpunum, struct cppc_perf_caps *perf_caps)
 }
 EXPORT_SYMBOL_GPL(cppc_get_perf_caps);
 
+/**
+ * cppc_perf_ctrs_in_pcc - Check if any perf counters are in a PCC region.
+ *
+ * CPPC has flexibility about how counters describing CPU perf are delivered.
+ * One of the choices is PCC regions, which can have a high access latency. This
+ * routine allows callers of cppc_get_perf_ctrs() to know this ahead of time.
+ *
+ * Return: true if any of the counters are in PCC regions, false otherwise
+ */
+bool cppc_perf_ctrs_in_pcc(void)
+{
+	int cpu;
+
+	for_each_present_cpu(cpu) {
+		struct cpc_register_resource *ref_perf_reg;
+		struct cpc_desc *cpc_desc;
+
+		cpc_desc = per_cpu(cpc_desc_ptr, cpu);
+
+		if (CPC_IN_PCC(&cpc_desc->cpc_regs[DELIVERED_CTR]) ||
+		    CPC_IN_PCC(&cpc_desc->cpc_regs[REFERENCE_CTR]) ||
+		    CPC_IN_PCC(&cpc_desc->cpc_regs[CTR_WRAP_TIME]))
+			return true;
+
+
+		ref_perf_reg = &cpc_desc->cpc_regs[REFERENCE_PERF];
+
+		/*
+		 * If reference perf register is not supported then we should
+		 * use the nominal perf value
+		 */
+		if (!CPC_SUPPORTED(ref_perf_reg))
+			ref_perf_reg = &cpc_desc->cpc_regs[NOMINAL_PERF];
+
+		if (CPC_IN_PCC(ref_perf_reg))
+			return true;
+	}
+	return false;
+}
+EXPORT_SYMBOL_GPL(cppc_perf_ctrs_in_pcc);
+
 /**
  * cppc_get_perf_ctrs - Read a CPU's performance feedback counters.
  * @cpunum: CPU from which to read counters.
diff --git a/drivers/cpufreq/cppc_cpufreq.c b/drivers/cpufreq/cppc_cpufreq.c
index 24eaf0ec344d..32fcb0bf74a4 100644
--- a/drivers/cpufreq/cppc_cpufreq.c
+++ b/drivers/cpufreq/cppc_cpufreq.c
@@ -63,7 +63,15 @@ static struct cppc_workaround_oem_info wa_info[] = {
 
 static struct cpufreq_driver cppc_cpufreq_driver;
 
+static enum {
+	FIE_UNSET = -1,
+	FIE_ENABLED,
+	FIE_DISABLED
+} fie_disabled = FIE_UNSET;
+
 #ifdef CONFIG_ACPI_CPPC_CPUFREQ_FIE
+module_param(fie_disabled, int, 0444);
+MODULE_PARM_DESC(fie_disabled, "Disable Frequency Invariance Engine (FIE)");
 
 /* Frequency invariance support */
 struct cppc_freq_invariance {
@@ -158,7 +166,7 @@ static void cppc_cpufreq_cpu_fie_init(struct cpufreq_policy *policy)
 	struct cppc_freq_invariance *cppc_fi;
 	int cpu, ret;
 
-	if (cppc_cpufreq_driver.get == hisi_cppc_cpufreq_get_rate)
+	if (fie_disabled)
 		return;
 
 	for_each_cpu(cpu, policy->cpus) {
@@ -199,7 +207,7 @@ static void cppc_cpufreq_cpu_fie_exit(struct cpufreq_policy *policy)
 	struct cppc_freq_invariance *cppc_fi;
 	int cpu;
 
-	if (cppc_cpufreq_driver.get == hisi_cppc_cpufreq_get_rate)
+	if (fie_disabled)
 		return;
 
 	/* policy->cpus will be empty here, use related_cpus instead */
@@ -229,7 +237,21 @@ static void __init cppc_freq_invariance_init(void)
 	};
 	int ret;
 
-	if (cppc_cpufreq_driver.get == hisi_cppc_cpufreq_get_rate)
+	switch (fie_disabled) {
+	/* honor user request */
+	case FIE_DISABLED:
+	case FIE_ENABLED:
+		break;
+	case FIE_UNSET:
+	default:
+		fie_disabled = FIE_ENABLED;
+		if (cppc_perf_ctrs_in_pcc()) {
+			pr_info("FIE not enabled on systems with registers in PCC\n");
+			fie_disabled = FIE_DISABLED;
+		}
+		break;
+	}
+	if (fie_disabled)
 		return;
 
 	kworker_fie = kthread_create_worker(0, "cppc_fie");
@@ -247,7 +269,7 @@ static void __init cppc_freq_invariance_init(void)
 
 static void cppc_freq_invariance_exit(void)
 {
-	if (cppc_cpufreq_driver.get == hisi_cppc_cpufreq_get_rate)
+	if (fie_disabled)
 		return;
 
 	kthread_destroy_worker(kworker_fie);
@@ -936,6 +958,7 @@ static void cppc_check_hisi_workaround(void)
 		    wa_info[i].oem_revision == tbl->oem_revision) {
 			/* Overwrite the get() callback */
 			cppc_cpufreq_driver.get = hisi_cppc_cpufreq_get_rate;
+			fie_disabled = FIE_DISABLED;
 			break;
 		}
 	}
diff --git a/include/acpi/cppc_acpi.h b/include/acpi/cppc_acpi.h
index f73d357ecdf5..c5614444031f 100644
--- a/include/acpi/cppc_acpi.h
+++ b/include/acpi/cppc_acpi.h
@@ -140,6 +140,7 @@ extern int cppc_get_perf_ctrs(int cpu, struct cppc_perf_fb_ctrs *perf_fb_ctrs);
 extern int cppc_set_perf(int cpu, struct cppc_perf_ctrls *perf_ctrls);
 extern int cppc_set_enable(int cpu, bool enable);
 extern int cppc_get_perf_caps(int cpu, struct cppc_perf_caps *caps);
+extern bool cppc_perf_ctrs_in_pcc(void);
 extern bool acpi_cpc_valid(void);
 extern bool cppc_allow_fast_switch(void);
 extern int acpi_get_psd_map(unsigned int cpu, struct cppc_cpudata *cpu_data);
@@ -173,6 +174,10 @@ static inline int cppc_get_perf_caps(int cpu, struct cppc_perf_caps *caps)
 {
 	return -ENOTSUPP;
 }
+static inline bool cppc_perf_ctrs_in_pcc(void)
+{
+	return false;
+}
 static inline bool acpi_cpc_valid(void)
 {
 	return false;
-- 
2.37.1

Re: [PATCH v4 1/2] ACPI: CPPC: Disable FIE if registers in PCC regions

[Punit Agrawal]

Hi Jeremy,

I missed the previous version (holidays) but hopefully still in time for
this one. A query / comment below.

Jeremy Linton <jeremy.linton@arm.com> writes:

> PCC regions utilize a mailbox to set/retrieve register values used by
> the CPPC code. This is fine as long as the operations are
> infrequent. With the FIE code enabled though the overhead can range
> from 2-11% of system CPU overhead (ex: as measured by top) on Arm
> based machines.
>
> So, before enabling FIE assure none of the registers used by
> cppc_get_perf_ctrs() are in the PCC region. Furthermore lets also
> enable a module parameter which can also disable it at boot or module
> reload.
>
> Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
> ---
>  drivers/acpi/cppc_acpi.c       | 41 ++++++++++++++++++++++++++++++++++
>  drivers/cpufreq/cppc_cpufreq.c | 31 +++++++++++++++++++++----
>  include/acpi/cppc_acpi.h       |  5 +++++
>  3 files changed, 73 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/acpi/cppc_acpi.c b/drivers/acpi/cppc_acpi.c
> index 1e15a9f25ae9..c840bf606b30 100644
> --- a/drivers/acpi/cppc_acpi.c
> +++ b/drivers/acpi/cppc_acpi.c
> @@ -1240,6 +1240,47 @@ int cppc_get_perf_caps(int cpunum, struct cppc_perf_caps *perf_caps)
>  }
>  EXPORT_SYMBOL_GPL(cppc_get_perf_caps);
>  
> +/**
> + * cppc_perf_ctrs_in_pcc - Check if any perf counters are in a PCC region.
> + *
> + * CPPC has flexibility about how counters describing CPU perf are delivered.
> + * One of the choices is PCC regions, which can have a high access latency. This
> + * routine allows callers of cppc_get_perf_ctrs() to know this ahead of time.
> + *
> + * Return: true if any of the counters are in PCC regions, false otherwise
> + */
> +bool cppc_perf_ctrs_in_pcc(void)
> +{
> +	int cpu;
> +
> +	for_each_present_cpu(cpu) {
> +		struct cpc_register_resource *ref_perf_reg;
> +		struct cpc_desc *cpc_desc;
> +
> +		cpc_desc = per_cpu(cpc_desc_ptr, cpu);
> +
> +		if (CPC_IN_PCC(&cpc_desc->cpc_regs[DELIVERED_CTR]) ||
> +		    CPC_IN_PCC(&cpc_desc->cpc_regs[REFERENCE_CTR]) ||
> +		    CPC_IN_PCC(&cpc_desc->cpc_regs[CTR_WRAP_TIME]))
> +			return true;
> +
> +
> +		ref_perf_reg = &cpc_desc->cpc_regs[REFERENCE_PERF];
> +
> +		/*
> +		 * If reference perf register is not supported then we should
> +		 * use the nominal perf value
> +		 */
> +		if (!CPC_SUPPORTED(ref_perf_reg))
> +			ref_perf_reg = &cpc_desc->cpc_regs[NOMINAL_PERF];
> +
> +		if (CPC_IN_PCC(ref_perf_reg))
> +			return true;
> +	}
> +	return false;
> +}
> +EXPORT_SYMBOL_GPL(cppc_perf_ctrs_in_pcc);
> +
>  /**
>   * cppc_get_perf_ctrs - Read a CPU's performance feedback counters.
>   * @cpunum: CPU from which to read counters.
> diff --git a/drivers/cpufreq/cppc_cpufreq.c b/drivers/cpufreq/cppc_cpufreq.c
> index 24eaf0ec344d..32fcb0bf74a4 100644
> --- a/drivers/cpufreq/cppc_cpufreq.c
> +++ b/drivers/cpufreq/cppc_cpufreq.c
> @@ -63,7 +63,15 @@ static struct cppc_workaround_oem_info wa_info[] = {
>  
>  static struct cpufreq_driver cppc_cpufreq_driver;
>  
> +static enum {
> +	FIE_UNSET = -1,
> +	FIE_ENABLED,
> +	FIE_DISABLED
> +} fie_disabled = FIE_UNSET;
> +
>  #ifdef CONFIG_ACPI_CPPC_CPUFREQ_FIE
> +module_param(fie_disabled, int, 0444);
> +MODULE_PARM_DESC(fie_disabled, "Disable Frequency Invariance Engine (FIE)");
>  
>  /* Frequency invariance support */
>  struct cppc_freq_invariance {
> @@ -158,7 +166,7 @@ static void cppc_cpufreq_cpu_fie_init(struct cpufreq_policy *policy)
>  	struct cppc_freq_invariance *cppc_fi;
>  	int cpu, ret;
>  
> -	if (cppc_cpufreq_driver.get == hisi_cppc_cpufreq_get_rate)
> +	if (fie_disabled)
>  		return;

With this change, if FIE is enabled, the rest of the function will run
even if the hisi workaround is enabled. Not sure if that is an
intentional change. The same applies to similar other changes in the
patch as well.

The rest of the changes look ok.

[...]

[Devel] [PATCH v4 2/2] cpufreq: CPPC: Change FIE default

[Jeremy Linton]

[-- Attachment #1: Type: text/plain, Size: 965 bytes --]

FIE is mostly implemented as PCC mailboxes on arm machines.  This was
enabled by default without any data suggesting that it does anything
but hurt system performance. Lets change the default to 'n' until
hardware appears which clearly benefits.

Signed-off-by: Jeremy Linton <jeremy.linton(a)arm.com>
---
 drivers/cpufreq/Kconfig.arm | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
index 954749afb5fe..ad66d8f15db0 100644
--- a/drivers/cpufreq/Kconfig.arm
+++ b/drivers/cpufreq/Kconfig.arm
@@ -22,7 +22,7 @@ config ACPI_CPPC_CPUFREQ
 config ACPI_CPPC_CPUFREQ_FIE
 	bool "Frequency Invariance support for CPPC cpufreq driver"
 	depends on ACPI_CPPC_CPUFREQ && GENERIC_ARCH_TOPOLOGY
-	default y
+	default n
 	help
 	  This extends frequency invariance support in the CPPC cpufreq driver,
 	  by using CPPC delivered and reference performance counters.
-- 
2.37.1

[PATCH v4 2/2] cpufreq: CPPC: Change FIE default

[Jeremy Linton]

FIE is mostly implemented as PCC mailboxes on arm machines.  This was
enabled by default without any data suggesting that it does anything
but hurt system performance. Lets change the default to 'n' until
hardware appears which clearly benefits.

Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
---
 drivers/cpufreq/Kconfig.arm | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
index 954749afb5fe..ad66d8f15db0 100644
--- a/drivers/cpufreq/Kconfig.arm
+++ b/drivers/cpufreq/Kconfig.arm
@@ -22,7 +22,7 @@ config ACPI_CPPC_CPUFREQ
 config ACPI_CPPC_CPUFREQ_FIE
 	bool "Frequency Invariance support for CPPC cpufreq driver"
 	depends on ACPI_CPPC_CPUFREQ && GENERIC_ARCH_TOPOLOGY
-	default y
+	default n
 	help
 	  This extends frequency invariance support in the CPPC cpufreq driver,
 	  by using CPPC delivered and reference performance counters.
-- 
2.37.1

Re: [PATCH v4 2/2] cpufreq: CPPC: Change FIE default

[Lukasz Luba]

On 8/19/22 17:25, Jeremy Linton wrote:
> FIE is mostly implemented as PCC mailboxes on arm machines.  This was
> enabled by default without any data suggesting that it does anything
> but hurt system performance. Lets change the default to 'n' until
> hardware appears which clearly benefits.
> 
> Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
> ---
>   drivers/cpufreq/Kconfig.arm | 2 +-
>   1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
> index 954749afb5fe..ad66d8f15db0 100644
> --- a/drivers/cpufreq/Kconfig.arm
> +++ b/drivers/cpufreq/Kconfig.arm
> @@ -22,7 +22,7 @@ config ACPI_CPPC_CPUFREQ
>   config ACPI_CPPC_CPUFREQ_FIE
>   	bool "Frequency Invariance support for CPPC cpufreq driver"
>   	depends on ACPI_CPPC_CPUFREQ && GENERIC_ARCH_TOPOLOGY
> -	default y
> +	default n
>   	help
>   	  This extends frequency invariance support in the CPPC cpufreq driver,
>   	  by using CPPC delivered and reference performance counters.

LGTM

Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>

[Devel] Re: [PATCH v4 1/2] ACPI: CPPC: Disable FIE if registers in PCC regions

[Jeremy Linton]

[-- Attachment #1: Type: text/plain, Size: 5093 bytes --]

Hi,

On 9/8/22 08:59, Punit Agrawal wrote:
> Hi Jeremy,
> 
> I missed the previous version (holidays) but hopefully still in time for
> this one. A query / comment below.
> 
> Jeremy Linton <jeremy.linton(a)arm.com> writes:
> 
>> PCC regions utilize a mailbox to set/retrieve register values used by
>> the CPPC code. This is fine as long as the operations are
>> infrequent. With the FIE code enabled though the overhead can range
>> from 2-11% of system CPU overhead (ex: as measured by top) on Arm
>> based machines.
>>
>> So, before enabling FIE assure none of the registers used by
>> cppc_get_perf_ctrs() are in the PCC region. Furthermore lets also
>> enable a module parameter which can also disable it at boot or module
>> reload.
>>
>> Signed-off-by: Jeremy Linton <jeremy.linton(a)arm.com>
>> ---
>>   drivers/acpi/cppc_acpi.c       | 41 ++++++++++++++++++++++++++++++++++
>>   drivers/cpufreq/cppc_cpufreq.c | 31 +++++++++++++++++++++----
>>   include/acpi/cppc_acpi.h       |  5 +++++
>>   3 files changed, 73 insertions(+), 4 deletions(-)
>>
>> diff --git a/drivers/acpi/cppc_acpi.c b/drivers/acpi/cppc_acpi.c
>> index 1e15a9f25ae9..c840bf606b30 100644
>> --- a/drivers/acpi/cppc_acpi.c
>> +++ b/drivers/acpi/cppc_acpi.c
>> @@ -1240,6 +1240,47 @@ int cppc_get_perf_caps(int cpunum, struct cppc_perf_caps *perf_caps)
>>   }
>>   EXPORT_SYMBOL_GPL(cppc_get_perf_caps);
>>   
>> +/**
>> + * cppc_perf_ctrs_in_pcc - Check if any perf counters are in a PCC region.
>> + *
>> + * CPPC has flexibility about how counters describing CPU perf are delivered.
>> + * One of the choices is PCC regions, which can have a high access latency. This
>> + * routine allows callers of cppc_get_perf_ctrs() to know this ahead of time.
>> + *
>> + * Return: true if any of the counters are in PCC regions, false otherwise
>> + */
>> +bool cppc_perf_ctrs_in_pcc(void)
>> +{
>> +	int cpu;
>> +
>> +	for_each_present_cpu(cpu) {
>> +		struct cpc_register_resource *ref_perf_reg;
>> +		struct cpc_desc *cpc_desc;
>> +
>> +		cpc_desc = per_cpu(cpc_desc_ptr, cpu);
>> +
>> +		if (CPC_IN_PCC(&cpc_desc->cpc_regs[DELIVERED_CTR]) ||
>> +		    CPC_IN_PCC(&cpc_desc->cpc_regs[REFERENCE_CTR]) ||
>> +		    CPC_IN_PCC(&cpc_desc->cpc_regs[CTR_WRAP_TIME]))
>> +			return true;
>> +
>> +
>> +		ref_perf_reg = &cpc_desc->cpc_regs[REFERENCE_PERF];
>> +
>> +		/*
>> +		 * If reference perf register is not supported then we should
>> +		 * use the nominal perf value
>> +		 */
>> +		if (!CPC_SUPPORTED(ref_perf_reg))
>> +			ref_perf_reg = &cpc_desc->cpc_regs[NOMINAL_PERF];
>> +
>> +		if (CPC_IN_PCC(ref_perf_reg))
>> +			return true;
>> +	}
>> +	return false;
>> +}
>> +EXPORT_SYMBOL_GPL(cppc_perf_ctrs_in_pcc);
>> +
>>   /**
>>    * cppc_get_perf_ctrs - Read a CPU's performance feedback counters.
>>    * @cpunum: CPU from which to read counters.
>> diff --git a/drivers/cpufreq/cppc_cpufreq.c b/drivers/cpufreq/cppc_cpufreq.c
>> index 24eaf0ec344d..32fcb0bf74a4 100644
>> --- a/drivers/cpufreq/cppc_cpufreq.c
>> +++ b/drivers/cpufreq/cppc_cpufreq.c
>> @@ -63,7 +63,15 @@ static struct cppc_workaround_oem_info wa_info[] = {
>>   
>>   static struct cpufreq_driver cppc_cpufreq_driver;
>>   
>> +static enum {
>> +	FIE_UNSET = -1,
>> +	FIE_ENABLED,
>> +	FIE_DISABLED
>> +} fie_disabled = FIE_UNSET;
>> +
>>   #ifdef CONFIG_ACPI_CPPC_CPUFREQ_FIE
>> +module_param(fie_disabled, int, 0444);
>> +MODULE_PARM_DESC(fie_disabled, "Disable Frequency Invariance Engine (FIE)");
>>   
>>   /* Frequency invariance support */
>>   struct cppc_freq_invariance {
>> @@ -158,7 +166,7 @@ static void cppc_cpufreq_cpu_fie_init(struct cpufreq_policy *policy)
>>   	struct cppc_freq_invariance *cppc_fi;
>>   	int cpu, ret;
>>   
>> -	if (cppc_cpufreq_driver.get == hisi_cppc_cpufreq_get_rate)
>> +	if (fie_disabled)
>>   		return;
> 
> With this change, if FIE is enabled, the rest of the function will run
> even if the hisi workaround is enabled. Not sure if that is an
> intentional change. The same applies to similar other changes in the
> patch as well.

Yah, I think its intentional, unless i'm missing something. The hisi 
quirk detection path forces this off regardless of the user attempting 
to force it on. Which is part of why I think the enum states must be as 
above. The other reason is that the final result of whether FIE is 
disabled ends up in /sys/modules/cppc_cpufreq/parameters/fie_disabled 
which in this case may not reflect what the user requested.


I have another patch that might be worth posting that I created while 
implementing CPPC on a machine a year or so ago that removes this quirk 
entirely. Instead it detects counters that aren't incrementing properly 
and NULL's out the get routine so that cpupower/etc report that the 
frequency is being retrieved from the kernel rather than the hardware. 
Someone else will have to test it though, because I eventually figured 
out how to synthesize both counters in a way that is generic enough to 
work on most machines.

Re: [PATCH v4 1/2] ACPI: CPPC: Disable FIE if registers in PCC regions

[Jeremy Linton]

Hi,

On 9/8/22 08:59, Punit Agrawal wrote:
> Hi Jeremy,
> 
> I missed the previous version (holidays) but hopefully still in time for
> this one. A query / comment below.
> 
> Jeremy Linton <jeremy.linton@arm.com> writes:
> 
>> PCC regions utilize a mailbox to set/retrieve register values used by
>> the CPPC code. This is fine as long as the operations are
>> infrequent. With the FIE code enabled though the overhead can range
>> from 2-11% of system CPU overhead (ex: as measured by top) on Arm
>> based machines.
>>
>> So, before enabling FIE assure none of the registers used by
>> cppc_get_perf_ctrs() are in the PCC region. Furthermore lets also
>> enable a module parameter which can also disable it at boot or module
>> reload.
>>
>> Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
>> ---
>>   drivers/acpi/cppc_acpi.c       | 41 ++++++++++++++++++++++++++++++++++
>>   drivers/cpufreq/cppc_cpufreq.c | 31 +++++++++++++++++++++----
>>   include/acpi/cppc_acpi.h       |  5 +++++
>>   3 files changed, 73 insertions(+), 4 deletions(-)
>>
>> diff --git a/drivers/acpi/cppc_acpi.c b/drivers/acpi/cppc_acpi.c
>> index 1e15a9f25ae9..c840bf606b30 100644
>> --- a/drivers/acpi/cppc_acpi.c
>> +++ b/drivers/acpi/cppc_acpi.c
>> @@ -1240,6 +1240,47 @@ int cppc_get_perf_caps(int cpunum, struct cppc_perf_caps *perf_caps)
>>   }
>>   EXPORT_SYMBOL_GPL(cppc_get_perf_caps);
>>   
>> +/**
>> + * cppc_perf_ctrs_in_pcc - Check if any perf counters are in a PCC region.
>> + *
>> + * CPPC has flexibility about how counters describing CPU perf are delivered.
>> + * One of the choices is PCC regions, which can have a high access latency. This
>> + * routine allows callers of cppc_get_perf_ctrs() to know this ahead of time.
>> + *
>> + * Return: true if any of the counters are in PCC regions, false otherwise
>> + */
>> +bool cppc_perf_ctrs_in_pcc(void)
>> +{
>> +	int cpu;
>> +
>> +	for_each_present_cpu(cpu) {
>> +		struct cpc_register_resource *ref_perf_reg;
>> +		struct cpc_desc *cpc_desc;
>> +
>> +		cpc_desc = per_cpu(cpc_desc_ptr, cpu);
>> +
>> +		if (CPC_IN_PCC(&cpc_desc->cpc_regs[DELIVERED_CTR]) ||
>> +		    CPC_IN_PCC(&cpc_desc->cpc_regs[REFERENCE_CTR]) ||
>> +		    CPC_IN_PCC(&cpc_desc->cpc_regs[CTR_WRAP_TIME]))
>> +			return true;
>> +
>> +
>> +		ref_perf_reg = &cpc_desc->cpc_regs[REFERENCE_PERF];
>> +
>> +		/*
>> +		 * If reference perf register is not supported then we should
>> +		 * use the nominal perf value
>> +		 */
>> +		if (!CPC_SUPPORTED(ref_perf_reg))
>> +			ref_perf_reg = &cpc_desc->cpc_regs[NOMINAL_PERF];
>> +
>> +		if (CPC_IN_PCC(ref_perf_reg))
>> +			return true;
>> +	}
>> +	return false;
>> +}
>> +EXPORT_SYMBOL_GPL(cppc_perf_ctrs_in_pcc);
>> +
>>   /**
>>    * cppc_get_perf_ctrs - Read a CPU's performance feedback counters.
>>    * @cpunum: CPU from which to read counters.
>> diff --git a/drivers/cpufreq/cppc_cpufreq.c b/drivers/cpufreq/cppc_cpufreq.c
>> index 24eaf0ec344d..32fcb0bf74a4 100644
>> --- a/drivers/cpufreq/cppc_cpufreq.c
>> +++ b/drivers/cpufreq/cppc_cpufreq.c
>> @@ -63,7 +63,15 @@ static struct cppc_workaround_oem_info wa_info[] = {
>>   
>>   static struct cpufreq_driver cppc_cpufreq_driver;
>>   
>> +static enum {
>> +	FIE_UNSET = -1,
>> +	FIE_ENABLED,
>> +	FIE_DISABLED
>> +} fie_disabled = FIE_UNSET;
>> +
>>   #ifdef CONFIG_ACPI_CPPC_CPUFREQ_FIE
>> +module_param(fie_disabled, int, 0444);
>> +MODULE_PARM_DESC(fie_disabled, "Disable Frequency Invariance Engine (FIE)");
>>   
>>   /* Frequency invariance support */
>>   struct cppc_freq_invariance {
>> @@ -158,7 +166,7 @@ static void cppc_cpufreq_cpu_fie_init(struct cpufreq_policy *policy)
>>   	struct cppc_freq_invariance *cppc_fi;
>>   	int cpu, ret;
>>   
>> -	if (cppc_cpufreq_driver.get == hisi_cppc_cpufreq_get_rate)
>> +	if (fie_disabled)
>>   		return;
> 
> With this change, if FIE is enabled, the rest of the function will run
> even if the hisi workaround is enabled. Not sure if that is an
> intentional change. The same applies to similar other changes in the
> patch as well.

Yah, I think its intentional, unless i'm missing something. The hisi 
quirk detection path forces this off regardless of the user attempting 
to force it on. Which is part of why I think the enum states must be as 
above. The other reason is that the final result of whether FIE is 
disabled ends up in /sys/modules/cppc_cpufreq/parameters/fie_disabled 
which in this case may not reflect what the user requested.


I have another patch that might be worth posting that I created while 
implementing CPPC on a machine a year or so ago that removes this quirk 
entirely. Instead it detects counters that aren't incrementing properly 
and NULL's out the get routine so that cpupower/etc report that the 
frequency is being retrieved from the kernel rather than the hardware. 
Someone else will have to test it though, because I eventually figured 
out how to synthesize both counters in a way that is generic enough to 
work on most machines.