ath10k-firmware: QCA4019 hw1.0: Add EnGenius EAP2200 specific BDFs

ath10k-firmware: QCA4019 hw1.0: Add EnGenius EAP2200 specific BDFs

[steven.lin]

[-- Attachment #1: Type: text/plain, Size: 1119 bytes --]

Hi,

The support for this device was added a while ago to OpenWrt. This AP requires two special BDFs to get the Wi-Fi PHYs working (correctly). The bmi-board-id='s would clash with one of the the IPQ401X AP-DK boards because QCA doesn't provide special IDs for customers and seems to use the AP-DK board-ids in the wifi firmware to change its behavior.

Now to the questions from the wiki page [1]:

*	description for what hardware this is:
-	it is a IPQ4019 based board
-	one QCA4019 radio is used as 2.4GHz radio
-	one QCA4019 radio is used as 5GHz radio
-	one QCA9888 radio is used as 5GHz radio

*	origin of the board file (did you create it yourself or where you downloaded)
-	taken from stock firmware image

*	ids to be used with the board file (ATH10K_BD_IE_BOARD_NAME in ath10k)
-	 QCA4019 hw1.0

md5sum of each new board file to add

+ bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=EnGenius-EAP2200
md5sum: e7610d866e32b9a40e5b75d885cc22a0
+ bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=EnGenius-EAP2200
md5sum: 5c3698ba55965df0dd8bbdca7706eb5d

Best regards,

Steven Lin


[-- Attachment #2: bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=EnGenius-EAP2200.bin --]
[-- Type: application/octet-stream, Size: 12064 bytes --]

[-- Attachment #3: bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=EnGenius-EAP2200.bin --]
[-- Type: application/octet-stream, Size: 12064 bytes --]

[-- Attachment #4: Type: text/plain, Size: 146 bytes --]

_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

Re: ath10k-firmware: QCA4019 hw1.0: Add EnGenius EAP2200 specific BDFs

[Kalle Valo]

<steven.lin@senao.com> writes:

> Hi,
>
> The support for this device was added a while ago to OpenWrt. This AP
> requires two special BDFs to get the Wi-Fi PHYs working (correctly).
> The bmi-board-id='s would clash with one of the the IPQ401X AP-DK
> boards because QCA doesn't provide special IDs for customers and seems
> to use the AP-DK board-ids in the wifi firmware to change its
> behavior.
>
> Now to the questions from the wiki page [1]:
>
> *	description for what hardware this is:
> -	it is a IPQ4019 based board
> -	one QCA4019 radio is used as 2.4GHz radio
> -	one QCA4019 radio is used as 5GHz radio
> -	one QCA9888 radio is used as 5GHz radio
>
> *	origin of the board file (did you create it yourself or where you downloaded)
> -	taken from stock firmware image
>
> *	ids to be used with the board file (ATH10K_BD_IE_BOARD_NAME in ath10k)
> -	 QCA4019 hw1.0
>
> md5sum of each new board file to add
>
> + bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=EnGenius-EAP2200
> md5sum: e7610d866e32b9a40e5b75d885cc22a0
> + bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=EnGenius-EAP2200
> md5sum: 5c3698ba55965df0dd8bbdca7706eb5d

Thanks, added to QCA4019/hw1.0/board-2.bin:

New:
bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=EnGenius-EAP2200
bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=EnGenius-EAP2200

Changed:


Deleted:

2 board image(s) added, 0 changed, 0 deleted, 52 in total

https://github.com/kvalo/ath10k-firmware/commit/38ebb2d24e1f5b7afa8a53eaf3c95d9b46b6b3ae

-- 
https://patchwork.kernel.org/project/linux-wireless/list/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches

_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k