Re: [PATCH] docs/system: document an example booting the versatilepb machine

["Alex Bennée" <alex.bennee@linaro.org>]

Peter Maydell <peter.maydell@linaro.org> writes:

> On Fri, 29 Jan 2021 at 18:13, Alex Bennée <alex.bennee@linaro.org> wrote:
>>
>> There is a bit more out there including Aurelien's excellent write up
>> and older Debian images here:
>>
>>   https://www.aurel32.net/info/debian_arm_qemu.php
>>   https://people.debian.org/~aurel32/qemu/armel/
>>
>> However the web is transitory and git is forever so lets add something
>> to the fine manual.
>>
>> Cc: Anders Roxell <anders.roxell@linaro.org>
>> Cc: Aurelien Jarno <aurelien@aurel32.net>
>> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
>> ---
>>  docs/system/arm/versatile.rst | 32 ++++++++++++++++++++++++++++++++
>>  1 file changed, 32 insertions(+)
>>
>> diff --git a/docs/system/arm/versatile.rst b/docs/system/arm/versatile.rst
>> index 51221c30a4..d16f20ccae 100644
>> --- a/docs/system/arm/versatile.rst
>> +++ b/docs/system/arm/versatile.rst
>> @@ -27,3 +27,35 @@ The Arm Versatile baseboard is emulated with the following devices:
>>     devices.
>>
>>  -  PL181 MultiMedia Card Interface with SD card.
>> +
>> +Booting a Linux kernel
>> +----------------------
>> +
>> +Building a current Linux kernel with ``versatile_defconfig`` should be
>> +enough to get something running.
>> +
>> +.. code-block:: bash
>> +
>> +  $ export ARCH=arm
>> +  $ export CROSS_COMPILE=arm-linux-gnueabihf-
>> +  $ make versatile_defconfig
>> +  $ make
>
> same remarks as for other patch.
>
> Does the 'make' make the right dtb automatically, by the way?
> (I have some notes where I had to tell the kernel to build the
> dtb explicitly, but maybe they are out of date.)

I didn't do anything special and it was there in the build directory. Do
your notes pre-date 2013:

commit cc8e9ad88487004372cae87718ff593d0a2fdc3a
Author: Rob Herring <rob.herring@calxeda.com>
Date:   Wed Mar 13 21:31:42 2013 -0500

    ARM: versatile: add versatile dtbs to dtbs target

    Add the versatile platform dtbs to the dtbs make rule.

    Signed-off-by: Rob Herring <rob.herring@calxeda.com>

>
>> +
>> +You may want to enable some additional modules if you want to boot
>> +something from the SCSI interface::
>> +
>> +  CONFIG_PCI=y
>> +  CONFIG_PCI_VERSATILE=y
>
> It's a bit daft that these aren't in the defconfig, but hey.
>
>> +  CONFIG_SCSI=y
>> +  CONFIG_SCSI_SYM53C8XX_2=y
>> +
>> +You can then boot with a command line like:
>> +
>> +.. code-block:: bash
>> +
>> +  $ qemu-system-arm -machine type=versatilepb \
>> +      -serial mon:stdio \
>> +      -drive if=scsi,driver=file,filename=debian-buster-armel-rootfs.ext4 \
>> +      -kernel zImage \
>> +      -dtb versatile-pb.dtb  \
>> +      -append "console=ttyAMA0 ro root=/dev/sda"
>
> thanks
> -- PMM


-- 
Alex Bennée