From: Jani Nikula <jani.nikula@linux.intel.com>
To: Gaurav K Singh <gaurav.k.singh@intel.com>,
intel-gfx <intel-gfx@lists.freedesktop.org>
Cc: Shobhit Kumar <shobhit.kumar@intel.com>
Subject: Re: [PATCH v4 03/10] drm/i915: Add support for port enable/disable for dual link configuration
Date: Fri, 05 Dec 2014 14:52:37 +0200 [thread overview]
Message-ID: <87ppbyjm22.fsf@intel.com> (raw)
In-Reply-To: <1417768768-17026-1-git-send-email-gaurav.k.singh@intel.com>
On Fri, 05 Dec 2014, Gaurav K Singh <gaurav.k.singh@intel.com> wrote:
> For Dual Link MIPI Panels, both Port A and Port C should be enabled
> during the MIPI encoder enabling sequence. Similarly, during the
> disabling sequence, both ports needs to be disabled.
>
> v2: Used for_each_dsi_port macro instead of for loop
>
> v3: Used intel_dsi->ports instead of dual_link var for dual link configuration check
>
> v4: Masking of the required MIPI port bits before writing proper values
>
> Signed-off-by: Gaurav K Singh <gaurav.k.singh@intel.com>
> Signed-off-by: Shobhit Kumar <shobhit.kumar@intel.com>
> Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Yup.
> ---
> drivers/gpu/drm/i915/i915_reg.h | 1 +
> drivers/gpu/drm/i915/intel_dsi.c | 37 +++++++++++++++++++---------
> drivers/gpu/drm/i915/intel_dsi.h | 1 +
> drivers/gpu/drm/i915/intel_dsi_panel_vbt.c | 4 +++
> 4 files changed, 31 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index dc03fac..c981f5d 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -6664,6 +6664,7 @@ enum punit_power_well {
> #define DPI_ENABLE (1 << 31) /* A + C */
> #define MIPIA_MIPI4DPHY_DELAY_COUNT_SHIFT 27
> #define MIPIA_MIPI4DPHY_DELAY_COUNT_MASK (0xf << 27)
> +#define DUAL_LINK_MODE_SHIFT 26
> #define DUAL_LINK_MODE_MASK (1 << 26)
> #define DUAL_LINK_MODE_FRONT_BACK (0 << 26)
> #define DUAL_LINK_MODE_PIXEL_ALTERNATIVE (1 << 26)
> diff --git a/drivers/gpu/drm/i915/intel_dsi.c b/drivers/gpu/drm/i915/intel_dsi.c
> index 693736b..fd4d397 100644
> --- a/drivers/gpu/drm/i915/intel_dsi.c
> +++ b/drivers/gpu/drm/i915/intel_dsi.c
> @@ -108,28 +108,41 @@ static void intel_dsi_port_enable(struct intel_encoder *encoder)
> struct drm_i915_private *dev_priv = dev->dev_private;
> struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc);
> struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
> - enum port port = intel_dsi_pipe_to_port(intel_crtc->pipe);
> + enum port port;
> u32 temp;
>
> - /* assert ip_tg_enable signal */
> - temp = I915_READ(MIPI_PORT_CTRL(port)) & ~LANE_CONFIGURATION_MASK;
> - temp = temp | intel_dsi->port_bits;
> - I915_WRITE(MIPI_PORT_CTRL(port), temp | DPI_ENABLE);
> - POSTING_READ(MIPI_PORT_CTRL(port));
> + for_each_dsi_port(port, intel_dsi->ports) {
> + temp = I915_READ(MIPI_PORT_CTRL(port));
> + temp &= ~LANE_CONFIGURATION_MASK;
> + temp &= ~DUAL_LINK_MODE_MASK;
> +
> + if (intel_dsi->ports == ((1 << PORT_A) | (1 << PORT_C))) {
> + temp |= (intel_dsi->dual_link - 1)
> + << DUAL_LINK_MODE_SHIFT;
> + temp |= intel_crtc->pipe ?
> + LANE_CONFIGURATION_DUAL_LINK_B :
> + LANE_CONFIGURATION_DUAL_LINK_A;
> + }
> + /* assert ip_tg_enable signal */
> + I915_WRITE(MIPI_PORT_CTRL(port), temp | DPI_ENABLE);
> + POSTING_READ(MIPI_PORT_CTRL(port));
> + }
> }
>
> static void intel_dsi_port_disable(struct intel_encoder *encoder)
> {
> struct drm_device *dev = encoder->base.dev;
> struct drm_i915_private *dev_priv = dev->dev_private;
> - struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc);
> - enum port port = intel_dsi_pipe_to_port(intel_crtc->pipe);
> + struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
> + enum port port;
> u32 temp;
>
> - /* de-assert ip_tg_enable signal */
> - temp = I915_READ(MIPI_PORT_CTRL(port));
> - I915_WRITE(MIPI_PORT_CTRL(port), temp & ~DPI_ENABLE);
> - POSTING_READ(MIPI_PORT_CTRL(port));
> + for_each_dsi_port(port, intel_dsi->ports) {
> + /* de-assert ip_tg_enable signal */
> + temp = I915_READ(MIPI_PORT_CTRL(port));
> + I915_WRITE(MIPI_PORT_CTRL(port), temp & ~DPI_ENABLE);
> + POSTING_READ(MIPI_PORT_CTRL(port));
> + }
> }
>
> static void intel_dsi_device_ready(struct intel_encoder *encoder)
> diff --git a/drivers/gpu/drm/i915/intel_dsi.h b/drivers/gpu/drm/i915/intel_dsi.h
> index 7f5d028..f2cc2fc 100644
> --- a/drivers/gpu/drm/i915/intel_dsi.h
> +++ b/drivers/gpu/drm/i915/intel_dsi.h
> @@ -104,6 +104,7 @@ struct intel_dsi {
> u8 clock_stop;
>
> u8 escape_clk_div;
> + u8 dual_link;
> u32 port_bits;
> u32 bw_timer;
> u32 dphy_reg;
> diff --git a/drivers/gpu/drm/i915/intel_dsi_panel_vbt.c b/drivers/gpu/drm/i915/intel_dsi_panel_vbt.c
> index 7766c42..f60146f 100644
> --- a/drivers/gpu/drm/i915/intel_dsi_panel_vbt.c
> +++ b/drivers/gpu/drm/i915/intel_dsi_panel_vbt.c
> @@ -287,6 +287,10 @@ static bool generic_init(struct intel_dsi_device *dsi)
> intel_dsi->clock_stop = mipi_config->enable_clk_stop ? 1 : 0;
> intel_dsi->lane_count = mipi_config->lane_cnt + 1;
> intel_dsi->pixel_format = mipi_config->videomode_color_format << 7;
> + intel_dsi->dual_link = mipi_config->dual_link;
> +
> + if (intel_dsi->dual_link)
> + intel_dsi->ports = ((1 << PORT_A) | (1 << PORT_C));
>
> if (intel_dsi->pixel_format == VID_MODE_FORMAT_RGB666)
> bits_per_pixel = 18;
> --
> 1.7.9.5
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Jani Nikula, Intel Open Source Technology Center
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2014-12-05 12:52 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-12-04 5:28 [PATCH 00/10] BYT DSI Dual Link Support Gaurav K Singh
2014-12-04 5:28 ` [PATCH 01/10] drm/i915: New functions added for enabling & disabling MIPI Port Ctrl reg Gaurav K Singh
2014-12-04 9:13 ` Jani Nikula
2014-12-04 5:28 ` [PATCH 02/10] drm/i915: Added port as parameter to the functions which does read/write of DSI Controller Gaurav K Singh
2014-12-04 9:14 ` Jani Nikula
2014-12-04 11:22 ` Daniel Vetter
2014-12-05 12:50 ` Singh, Gaurav K
2014-12-05 14:38 ` Daniel Vetter
2014-12-05 20:35 ` Singh, Gaurav K
2014-12-04 5:28 ` [PATCH 03/10] drm/i915: Add support for port enable/disable for dual link configuration Gaurav K Singh
2014-12-04 9:17 ` Jani Nikula
2014-12-05 8:39 ` [PATCH v4 " Gaurav K Singh
2014-12-05 12:52 ` Jani Nikula [this message]
2014-12-04 5:28 ` [PATCH 04/10] drm/i915: Pixel Clock changes for DSI dual link Gaurav K Singh
2014-12-04 9:27 ` Jani Nikula
2014-12-05 8:43 ` [PATCH v3 " Gaurav K Singh
2014-12-05 16:33 ` [PATCH " Singh, Gaurav K
2014-12-05 16:54 ` Siluvery, Arun
2014-12-05 17:18 ` Singh, Gaurav K
2014-12-05 17:36 ` Jani Nikula
2014-12-05 17:48 ` Siluvery, Arun
2014-12-05 20:43 ` Singh, Gaurav K
2014-12-04 5:28 ` [PATCH 05/10] drm/i915: Dual link needs Shutdown and Turn on packet for both ports Gaurav K Singh
2014-12-04 10:41 ` Jani Nikula
2014-12-05 19:10 ` [PATCH 5/5] " Gaurav K Singh
2014-12-05 20:53 ` Daniel Vetter
2014-12-04 5:28 ` [PATCH 06/10] drm/i915: Enable DSI PLL for both DSI0 and DSI1 in case of dual link Gaurav K Singh
2014-12-04 11:17 ` Jani Nikula
2014-12-04 5:28 ` [PATCH 07/10] drm/i915: cck reg used for checking DSI Pll locked Gaurav K Singh
2014-12-04 11:22 ` Jani Nikula
2014-12-05 8:46 ` [PATCH v2 " Gaurav K Singh
2014-12-04 5:28 ` [PATCH 08/10] drm/i915: MIPI Timings related changes for dual link Gaurav K Singh
2014-12-04 11:24 ` Jani Nikula
2014-12-04 5:28 ` [PATCH 09/10] drm/i915: Update the DSI disable path to support dual link panel disabling Gaurav K Singh
2014-12-04 11:37 ` Jani Nikula
2014-12-05 8:52 ` [PATCH v4 " Gaurav K Singh
2014-12-04 5:28 ` [PATCH 10/10] drm/i915: Update the DSI enable path to support dual link panel enabling Gaurav K Singh
2014-12-04 11:49 ` Jani Nikula
2014-12-05 8:54 ` [PATCH v4 10/10] drm/i915: Update the DSI enable path to support dual Gaurav K Singh
2014-12-05 20:31 ` [PATCH " Gaurav K Singh
2014-12-05 4:04 ` [PATCH 10/10] drm/i915: Update the DSI enable path to support dual link panel enabling shuang.he
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87ppbyjm22.fsf@intel.com \
--to=jani.nikula@linux.intel.com \
--cc=gaurav.k.singh@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=shobhit.kumar@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.