Re: [PATCH v2] arm: omap3: am35x: Don't mark missing features as present

[Kevin Hilman <khilman@ti.com>]

"Mark A. Greer" <mgreer@animalcreek.com> writes:

> From: "Mark A. Greer" <mgreer@animalcreek.com>
>
> The Chip Identification register on the am35x family of SoCs
> has bits 12, 7:5, and 3:2 marked as reserved and are read as
> zeroes.  Unfortunately, on other omap SoCs, a 0 bit means a
> feature is "Full Use" so the OMAP3_CHECK_FEATURE() macro
> called by omap3_check_features() will incorrectly interpret
> those zeroes to mean that a feature is present even though it
> isn't.  To fix that, the feature bits that are incorrectly
> set (namely, OMAP3_HAS_IVA and OMAP3_HAS_ISP) need to be
> cleared after all of the calls to OMAP3_CHECK_FEATURE() in
> omap3_check_features() are made.
>
> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com>

Looks good, thanks.

I'll queue this one up on top of my AM35x cpu_is cleanups (branch:
for_3.5/cleanup/am35x-cpu-is)

Kevin

> ---
>  arch/arm/mach-omap2/id.c |   11 +++++++++++
>  1 file changed, 11 insertions(+)
>
> diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
> index d2913e2..20c95b4 100644
> --- a/arch/arm/mach-omap2/id.c
> +++ b/arch/arm/mach-omap2/id.c
> @@ -247,6 +247,17 @@ void __init omap3xxx_check_features(void)
>  	omap_features |= OMAP3_HAS_SDRC;
>  
>  	/*
> +	 * am35x fixups:
> +	 * - The am35x Chip ID register has bits 12, 7:5, and 3:2 marked as
> +	 *   reserved and therefore return 0 when read.  Unfortunately,
> +	 *   OMAP3_CHECK_FEATURE() will interpret some of those zeroes to
> +	 *   mean that a feature is present even though it isn't so clear
> +	 *   the incorrectly set feature bits.
> +	 */
> +	if (cpu_is_am35xx())
> +		omap_features &= ~(OMAP3_HAS_IVA | OMAP3_HAS_ISP);
> +
> +	/*
>  	 * TODO: Get additional info (where applicable)
>  	 *       e.g. Size of L2 cache.
>  	 */