All of lore.kernel.org
 help / color / mirror / Atom feed
From: Marc Zyngier <maz@kernel.org>
To: Claudiu Beznea <claudiu.beznea@microchip.com>
Cc: <tglx@linutronix.de>, <robh+dt@kernel.org>,
	<linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>
Subject: Re: [PATCH v3 2/2] irqchip/mchp-eic: add support
Date: Mon, 20 Sep 2021 13:53:08 +0100	[thread overview]
Message-ID: <87r1djv26j.wl-maz@kernel.org> (raw)
In-Reply-To: <20210910060656.1061234-3-claudiu.beznea@microchip.com>

On Fri, 10 Sep 2021 07:06:56 +0100,
Claudiu Beznea <claudiu.beznea@microchip.com> wrote:
> 
> Add support for Microchip External Interrupt Controller. The controller
> supports 2 external interrupt lines. For every external input there is
> a connection to GIC. The interrupt controllers contains only 4
> registers:
> - EIC_GFCS (read only): which indicates that glitch filter configuration
>   is ready (not addressed in this implementation)
> - EIC_SCFG0R, EIC_SCFG1R (read, write): allows per interrupt specific
>   settings: enable, polarity/edge settings, glitch filter settings
> - EIC_WPMR, EIC_WPSR: enables write protection mode specific settings
>   (which are architecture specific) for the controller and are not
>   addressed in this implementation
> 
> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
> ---
>  MAINTAINERS                    |   6 +
>  drivers/irqchip/Kconfig        |   8 +
>  drivers/irqchip/Makefile       |   1 +
>  drivers/irqchip/irq-mchp-eic.c | 314 +++++++++++++++++++++++++++++++++
>  4 files changed, 329 insertions(+)
>  create mode 100644 drivers/irqchip/irq-mchp-eic.c
> 
> diff --git a/MAINTAINERS b/MAINTAINERS
> index a61f4f3b78a9..87174babb0ef 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -12141,6 +12141,12 @@ L:	linux-crypto@vger.kernel.org
>  S:	Maintained
>  F:	drivers/crypto/atmel-ecc.*
>  
> +MICROCHIP EIC DRIVER
> +M:	Claudiu Beznea <claudiu.beznea@microchip.com>
> +L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
> +S:	Supported
> +F:	drivers/irqchip/irq-mchp-eic.c
> +
>  MICROCHIP I2C DRIVER
>  M:	Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
>  L:	linux-i2c@vger.kernel.org
> diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
> index 4d5924e9f766..450c7b8ab30f 100644
> --- a/drivers/irqchip/Kconfig
> +++ b/drivers/irqchip/Kconfig
> @@ -601,4 +601,12 @@ config APPLE_AIC
>  	  Support for the Apple Interrupt Controller found on Apple Silicon SoCs,
>  	  such as the M1.
>  
> +config MCHP_EIC
> +	bool "Microchip External Interrupt Controller"
> +	depends on ARCH_AT91 || COMPILE_TEST
> +	select IRQ_DOMAIN
> +	select IRQ_DOMAIN_HIERARCHY
> +	help
> +	  Support for Microchip External Interrupt Controller.
> +
>  endmenu
> diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
> index f88cbf36a9d2..c1f611cbfbf8 100644
> --- a/drivers/irqchip/Makefile
> +++ b/drivers/irqchip/Makefile
> @@ -116,3 +116,4 @@ obj-$(CONFIG_MACH_REALTEK_RTL)		+= irq-realtek-rtl.o
>  obj-$(CONFIG_WPCM450_AIC)		+= irq-wpcm450-aic.o
>  obj-$(CONFIG_IRQ_IDT3243X)		+= irq-idt3243x.o
>  obj-$(CONFIG_APPLE_AIC)			+= irq-apple-aic.o
> +obj-$(CONFIG_MCHP_EIC)			+= irq-mchp-eic.o
> diff --git a/drivers/irqchip/irq-mchp-eic.c b/drivers/irqchip/irq-mchp-eic.c
> new file mode 100644
> index 000000000000..ab24a464b929
> --- /dev/null
> +++ b/drivers/irqchip/irq-mchp-eic.c
> @@ -0,0 +1,314 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Microchip External Interrupt Controller driver
> + *
> + * Copyright (C) 2021 Microchip Technology Inc. and its subsidiaries
> + *
> + * Author: Claudiu Beznea <claudiu.beznea@microchip.com>
> + */
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/interrupt.h>
> +#include <linux/irqchip.h>
> +#include <linux/of_address.h>
> +#include <linux/of_irq.h>
> +
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +#define MCHP_EIC_GFCS			(0x0)
> +#define MCHP_EIC_SCFG(x)		(0x4 + (x) * 0x4)
> +#define MCHP_EIC_SCFG_EN		BIT(16)
> +#define MCHP_EIC_SCFG_LVL		BIT(9)
> +#define MCHP_EIC_SCFG_POL		BIT(8)
> +
> +#define MCHP_EIC_NIRQ			(2)
> +
> +/*
> + * struct mchp_eic - EIC private data structure
> + * @base: base address
> + * @dev: eic device
> + * @clk: peripheral clock
> + * @domain: irq domain
> + * @irqs: irqs b/w eic and gic
> + * @scfg: backup for scfg registers (necessary for backup and self-refresh mode)
> + * @wakeup_source: wakeup source mask
> + */
> +struct mchp_eic {
> +	void __iomem *base;
> +	struct device *dev;
> +	struct clk *clk;
> +	struct irq_domain *domain;
> +	u32 irqs[MCHP_EIC_NIRQ];
> +	u32 scfg[MCHP_EIC_NIRQ];
> +	u32 wakeup_source;
> +};
> +
> +static void mchp_eic_irq_mask(struct irq_data *d)
> +{
> +	struct mchp_eic *eic = irq_data_get_irq_chip_data(d);
> +	unsigned int tmp;
> +
> +	tmp = readl_relaxed(eic->base + MCHP_EIC_SCFG(d->hwirq));
> +	tmp &= ~MCHP_EIC_SCFG_EN;
> +	writel_relaxed(tmp, eic->base + MCHP_EIC_SCFG(d->hwirq));
> +
> +	irq_chip_mask_parent(d);
> +}
> +
> +static void mchp_eic_irq_unmask(struct irq_data *d)
> +{
> +	struct mchp_eic *eic = irq_data_get_irq_chip_data(d);
> +	unsigned int tmp;
> +
> +	tmp = readl_relaxed(eic->base + MCHP_EIC_SCFG(d->hwirq));
> +	tmp |= MCHP_EIC_SCFG_EN;
> +	writel_relaxed(tmp, eic->base + MCHP_EIC_SCFG(d->hwirq));
> +
> +	irq_chip_unmask_parent(d);
> +}
> +
> +static int mchp_eic_irq_set_type(struct irq_data *d, unsigned int type)
> +{
> +	struct mchp_eic *eic = irq_data_get_irq_chip_data(d);
> +	unsigned int parent_irq_type;
> +	unsigned int tmp;
> +
> +	tmp = readl_relaxed(eic->base + MCHP_EIC_SCFG(d->hwirq));
> +	tmp &= ~(MCHP_EIC_SCFG_POL | MCHP_EIC_SCFG_LVL);
> +	switch (type) {
> +	case IRQ_TYPE_LEVEL_HIGH:
> +		tmp |= MCHP_EIC_SCFG_POL | MCHP_EIC_SCFG_LVL;
> +		parent_irq_type = IRQ_TYPE_LEVEL_HIGH;
> +		break;
> +	case IRQ_TYPE_LEVEL_LOW:
> +		tmp |= MCHP_EIC_SCFG_LVL;
> +		parent_irq_type = IRQ_TYPE_LEVEL_HIGH;
> +		break;
> +	case IRQ_TYPE_EDGE_RISING:
> +		parent_irq_type = IRQ_TYPE_EDGE_RISING;
> +		break;
> +	case IRQ_TYPE_EDGE_FALLING:
> +		tmp |= MCHP_EIC_SCFG_POL;
> +		parent_irq_type = IRQ_TYPE_EDGE_RISING;
> +		break;
> +	default:
> +		return -EINVAL;
> +	}
> +
> +	writel_relaxed(tmp, eic->base + MCHP_EIC_SCFG(d->hwirq));
> +
> +	return irq_chip_set_type_parent(d, parent_irq_type);
> +}
> +
> +static int mchp_eic_irq_set_wake(struct irq_data *d, unsigned int on)
> +{
> +	struct mchp_eic *eic = irq_data_get_irq_chip_data(d);
> +
> +	irq_set_irq_wake(eic->irqs[d->hwirq], on);
> +	if (on)
> +		eic->wakeup_source |= BIT(d->hwirq);
> +	else
> +		eic->wakeup_source &= ~BIT(d->hwirq);
> +
> +	return 0;
> +}
> +
> +static struct irq_chip mchp_eic_chip = {
> +	.name		= "eic",
> +	.flags		= IRQCHIP_MASK_ON_SUSPEND | IRQCHIP_SET_TYPE_MASKED,
> +	.irq_mask	= mchp_eic_irq_mask,
> +	.irq_unmask	= mchp_eic_irq_unmask,
> +	.irq_set_type	= mchp_eic_irq_set_type,
> +	.irq_ack	= irq_chip_ack_parent,
> +	.irq_eoi	= irq_chip_eoi_parent,
> +	.irq_retrigger	= irq_chip_retrigger_hierarchy,
> +	.irq_set_wake	= mchp_eic_irq_set_wake,
> +};
> +
> +static int mchp_eic_domain_translate(struct irq_domain *d,
> +				     struct irq_fwspec *fwspec,
> +				     unsigned long *hwirq,
> +				     unsigned int *type)
> +{
> +	if (!is_of_node(fwspec->fwnode))
> +		return -EINVAL;
> +
> +	if (fwspec->param_count != 2 || fwspec->param[0] >= MCHP_EIC_NIRQ)
> +		return -EINVAL;
> +
> +	*hwirq = fwspec->param[0];
> +	*type = fwspec->param[1];
> +
> +	return 0;
> +}

Which is pretty much irq_domain_translate_twocell(). Please use that.

> +
> +static int mchp_eic_domain_alloc(struct irq_domain *domain, unsigned int virq,
> +				 unsigned int nr_irqs, void *data)
> +{
> +	struct mchp_eic *eic = domain->host_data;
> +	struct irq_fwspec *fwspec = data;
> +	struct irq_fwspec parent_fwspec;
> +	irq_hw_number_t hwirq;
> +	unsigned int type;
> +	int ret;
> +
> +	if (WARN_ON(nr_irqs != 1))
> +		return -EINVAL;
> +
> +	ret = mchp_eic_domain_translate(domain, fwspec, &hwirq, &type);
> +	if (ret)
> +		return ret;
> +
> +	switch (type) {
> +	case IRQ_TYPE_EDGE_RISING:
> +	case IRQ_TYPE_LEVEL_HIGH:
> +		break;
> +	case IRQ_TYPE_EDGE_FALLING:
> +		type = IRQ_TYPE_EDGE_RISING;
> +		break;
> +	case IRQ_TYPE_LEVEL_LOW:
> +		type = IRQ_TYPE_LEVEL_HIGH;
> +		break;
> +	default:
> +		return -EINVAL;
> +	}
> +
> +	irq_domain_set_hwirq_and_chip(domain, virq, hwirq, &mchp_eic_chip, eic);
> +
> +	parent_fwspec.fwnode = domain->parent->fwnode;
> +	parent_fwspec.param_count = 3;
> +	parent_fwspec.param[0] = GIC_SPI;
> +	parent_fwspec.param[1] = eic->irqs[hwirq];
> +	parent_fwspec.param[2] = type;
> +
> +	return irq_domain_alloc_irqs_parent(domain, virq, 1, &parent_fwspec);
> +}
> +
> +static const struct irq_domain_ops mchp_eic_domain_ops = {
> +	.translate	= mchp_eic_domain_translate,
> +	.alloc		= mchp_eic_domain_alloc,
> +	.free		= irq_domain_free_irqs_common,
> +};
> +
> +static int mchp_eic_probe(struct platform_device *pdev)
> +{
> +	struct irq_domain *parent_domain = NULL;
> +	struct device *dev = &pdev->dev;
> +	struct device_node *np = dev->of_node;
> +	struct device_node *gic_node;
> +	struct mchp_eic *eic;
> +	int ret, i;
> +
> +	eic = devm_kzalloc(dev, sizeof(*eic), GFP_KERNEL);
> +	if (!eic)
> +		return -ENOMEM;
> +
> +	eic->base = devm_platform_get_and_ioremap_resource(pdev, 0, NULL);
> +	if (IS_ERR(eic->base))
> +		return PTR_ERR(eic->base);
> +
> +	gic_node = of_irq_find_parent(np);
> +	if (gic_node)
> +		parent_domain = irq_find_host(gic_node);
> +	of_node_put(gic_node);
> +	if (!parent_domain)
> +		return -ENODEV;
> +
> +	eic->clk = devm_clk_get(dev, NULL);
> +	if (IS_ERR(eic->clk))
> +		return PTR_ERR(eic->clk);
> +
> +	ret = clk_prepare_enable(eic->clk);
> +	if (ret)
> +		return ret;
> +
> +	for (i = 0; i < MCHP_EIC_NIRQ; i++) {
> +		struct of_phandle_args irq;
> +
> +		/* Disable it, if any. */
> +		writel_relaxed(0UL, eic->base + MCHP_EIC_SCFG(i));
> +
> +		ret = of_irq_parse_one(np, i, &irq);
> +		if (ret)
> +			goto clk_unprepare;
> +
> +		if (WARN_ON(irq.args_count != 3)) {
> +			ret = -EINVAL;
> +			goto clk_unprepare;
> +		}
> +
> +		eic->irqs[i] = irq.args[1];
> +	}
> +
> +	eic->domain = irq_domain_add_hierarchy(parent_domain, 0, MCHP_EIC_NIRQ,
> +					       np, &mchp_eic_domain_ops, eic);
> +	if (!eic->domain) {
> +		ret = dev_err_probe(dev, -ENOMEM, "Failed to add domain\n");
> +		goto clk_unprepare;
> +	}
> +
> +	eic->dev = dev;
> +	platform_set_drvdata(pdev, eic);
> +
> +	dev_info(dev, "EIC registered, nr_irqs %u\n", MCHP_EIC_NIRQ);
> +
> +	return 0;
> +
> +clk_unprepare:
> +	clk_disable_unprepare(eic->clk);
> +	return ret;
> +}
> +
> +static int __maybe_unused mchp_eic_suspend(struct device *dev)
> +{
> +	struct mchp_eic *eic = dev_get_drvdata(dev);
> +	unsigned int hwirq;
> +
> +	for (hwirq = 0; hwirq < MCHP_EIC_NIRQ; hwirq++)
> +		eic->scfg[hwirq] = readl_relaxed(eic->base +
> +						 MCHP_EIC_SCFG(hwirq));
> +
> +	if (!eic->wakeup_source)
> +		clk_disable_unprepare(eic->clk);
> +
> +	return 0;
> +}
> +
> +static int __maybe_unused mchp_eic_resume(struct device *dev)
> +{
> +	struct mchp_eic *eic = dev_get_drvdata(dev);
> +	unsigned int hwirq;
> +
> +	if (!eic->wakeup_source)
> +		clk_prepare_enable(eic->clk);
> +
> +	for (hwirq = 0; hwirq < MCHP_EIC_NIRQ; hwirq++)
> +		writel_relaxed(eic->scfg[hwirq], eic->base +
> +			       MCHP_EIC_SCFG(hwirq));
> +
> +	return 0;
> +}
> +
> +static const struct dev_pm_ops mchp_eic_pm_ops = {
> +	SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(mchp_eic_suspend, mchp_eic_resume)
> +};
> +
> +static const struct of_device_id mchp_eic_dt_ids[] = {
> +	{ .compatible = "microchip,sama7g5-eic", },
> +	{ },
> +};
> +MODULE_DEVICE_TABLE(of, mchp_eic_dt_ids);
> +
> +static struct platform_driver mchp_eic_device_driver = {
> +	.probe		= mchp_eic_probe,
> +	.driver		= {
> +		.name = "mchp-eic",
> +		.of_match_table = of_match_ptr(mchp_eic_dt_ids),
> +		.pm = pm_ptr(&mchp_eic_pm_ops),
> +	},
> +};
> +builtin_platform_driver(mchp_eic_device_driver);

Please use the

IRQCHIP_PLATFORM_DRIVER_BEGIN()
IRQCHIP_MATCH()
IRQCHIP_PLATFORM_DRIVER_END()

construct instead. See drivers/irqchip/qcom-pdc.c for an example. It
will at the very least avoid exposing the unbind attribute that will
lead to an explosion if touched.

Thanks,

	M.

-- 
Without deviation from the norm, progress is not possible.

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

WARNING: multiple messages have this Message-ID (diff)
From: Marc Zyngier <maz@kernel.org>
To: Claudiu Beznea <claudiu.beznea@microchip.com>
Cc: <tglx@linutronix.de>, <robh+dt@kernel.org>,
	<linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>
Subject: Re: [PATCH v3 2/2] irqchip/mchp-eic: add support
Date: Mon, 20 Sep 2021 13:53:08 +0100	[thread overview]
Message-ID: <87r1djv26j.wl-maz@kernel.org> (raw)
In-Reply-To: <20210910060656.1061234-3-claudiu.beznea@microchip.com>

On Fri, 10 Sep 2021 07:06:56 +0100,
Claudiu Beznea <claudiu.beznea@microchip.com> wrote:
> 
> Add support for Microchip External Interrupt Controller. The controller
> supports 2 external interrupt lines. For every external input there is
> a connection to GIC. The interrupt controllers contains only 4
> registers:
> - EIC_GFCS (read only): which indicates that glitch filter configuration
>   is ready (not addressed in this implementation)
> - EIC_SCFG0R, EIC_SCFG1R (read, write): allows per interrupt specific
>   settings: enable, polarity/edge settings, glitch filter settings
> - EIC_WPMR, EIC_WPSR: enables write protection mode specific settings
>   (which are architecture specific) for the controller and are not
>   addressed in this implementation
> 
> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
> ---
>  MAINTAINERS                    |   6 +
>  drivers/irqchip/Kconfig        |   8 +
>  drivers/irqchip/Makefile       |   1 +
>  drivers/irqchip/irq-mchp-eic.c | 314 +++++++++++++++++++++++++++++++++
>  4 files changed, 329 insertions(+)
>  create mode 100644 drivers/irqchip/irq-mchp-eic.c
> 
> diff --git a/MAINTAINERS b/MAINTAINERS
> index a61f4f3b78a9..87174babb0ef 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -12141,6 +12141,12 @@ L:	linux-crypto@vger.kernel.org
>  S:	Maintained
>  F:	drivers/crypto/atmel-ecc.*
>  
> +MICROCHIP EIC DRIVER
> +M:	Claudiu Beznea <claudiu.beznea@microchip.com>
> +L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
> +S:	Supported
> +F:	drivers/irqchip/irq-mchp-eic.c
> +
>  MICROCHIP I2C DRIVER
>  M:	Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
>  L:	linux-i2c@vger.kernel.org
> diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
> index 4d5924e9f766..450c7b8ab30f 100644
> --- a/drivers/irqchip/Kconfig
> +++ b/drivers/irqchip/Kconfig
> @@ -601,4 +601,12 @@ config APPLE_AIC
>  	  Support for the Apple Interrupt Controller found on Apple Silicon SoCs,
>  	  such as the M1.
>  
> +config MCHP_EIC
> +	bool "Microchip External Interrupt Controller"
> +	depends on ARCH_AT91 || COMPILE_TEST
> +	select IRQ_DOMAIN
> +	select IRQ_DOMAIN_HIERARCHY
> +	help
> +	  Support for Microchip External Interrupt Controller.
> +
>  endmenu
> diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
> index f88cbf36a9d2..c1f611cbfbf8 100644
> --- a/drivers/irqchip/Makefile
> +++ b/drivers/irqchip/Makefile
> @@ -116,3 +116,4 @@ obj-$(CONFIG_MACH_REALTEK_RTL)		+= irq-realtek-rtl.o
>  obj-$(CONFIG_WPCM450_AIC)		+= irq-wpcm450-aic.o
>  obj-$(CONFIG_IRQ_IDT3243X)		+= irq-idt3243x.o
>  obj-$(CONFIG_APPLE_AIC)			+= irq-apple-aic.o
> +obj-$(CONFIG_MCHP_EIC)			+= irq-mchp-eic.o
> diff --git a/drivers/irqchip/irq-mchp-eic.c b/drivers/irqchip/irq-mchp-eic.c
> new file mode 100644
> index 000000000000..ab24a464b929
> --- /dev/null
> +++ b/drivers/irqchip/irq-mchp-eic.c
> @@ -0,0 +1,314 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Microchip External Interrupt Controller driver
> + *
> + * Copyright (C) 2021 Microchip Technology Inc. and its subsidiaries
> + *
> + * Author: Claudiu Beznea <claudiu.beznea@microchip.com>
> + */
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/interrupt.h>
> +#include <linux/irqchip.h>
> +#include <linux/of_address.h>
> +#include <linux/of_irq.h>
> +
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +#define MCHP_EIC_GFCS			(0x0)
> +#define MCHP_EIC_SCFG(x)		(0x4 + (x) * 0x4)
> +#define MCHP_EIC_SCFG_EN		BIT(16)
> +#define MCHP_EIC_SCFG_LVL		BIT(9)
> +#define MCHP_EIC_SCFG_POL		BIT(8)
> +
> +#define MCHP_EIC_NIRQ			(2)
> +
> +/*
> + * struct mchp_eic - EIC private data structure
> + * @base: base address
> + * @dev: eic device
> + * @clk: peripheral clock
> + * @domain: irq domain
> + * @irqs: irqs b/w eic and gic
> + * @scfg: backup for scfg registers (necessary for backup and self-refresh mode)
> + * @wakeup_source: wakeup source mask
> + */
> +struct mchp_eic {
> +	void __iomem *base;
> +	struct device *dev;
> +	struct clk *clk;
> +	struct irq_domain *domain;
> +	u32 irqs[MCHP_EIC_NIRQ];
> +	u32 scfg[MCHP_EIC_NIRQ];
> +	u32 wakeup_source;
> +};
> +
> +static void mchp_eic_irq_mask(struct irq_data *d)
> +{
> +	struct mchp_eic *eic = irq_data_get_irq_chip_data(d);
> +	unsigned int tmp;
> +
> +	tmp = readl_relaxed(eic->base + MCHP_EIC_SCFG(d->hwirq));
> +	tmp &= ~MCHP_EIC_SCFG_EN;
> +	writel_relaxed(tmp, eic->base + MCHP_EIC_SCFG(d->hwirq));
> +
> +	irq_chip_mask_parent(d);
> +}
> +
> +static void mchp_eic_irq_unmask(struct irq_data *d)
> +{
> +	struct mchp_eic *eic = irq_data_get_irq_chip_data(d);
> +	unsigned int tmp;
> +
> +	tmp = readl_relaxed(eic->base + MCHP_EIC_SCFG(d->hwirq));
> +	tmp |= MCHP_EIC_SCFG_EN;
> +	writel_relaxed(tmp, eic->base + MCHP_EIC_SCFG(d->hwirq));
> +
> +	irq_chip_unmask_parent(d);
> +}
> +
> +static int mchp_eic_irq_set_type(struct irq_data *d, unsigned int type)
> +{
> +	struct mchp_eic *eic = irq_data_get_irq_chip_data(d);
> +	unsigned int parent_irq_type;
> +	unsigned int tmp;
> +
> +	tmp = readl_relaxed(eic->base + MCHP_EIC_SCFG(d->hwirq));
> +	tmp &= ~(MCHP_EIC_SCFG_POL | MCHP_EIC_SCFG_LVL);
> +	switch (type) {
> +	case IRQ_TYPE_LEVEL_HIGH:
> +		tmp |= MCHP_EIC_SCFG_POL | MCHP_EIC_SCFG_LVL;
> +		parent_irq_type = IRQ_TYPE_LEVEL_HIGH;
> +		break;
> +	case IRQ_TYPE_LEVEL_LOW:
> +		tmp |= MCHP_EIC_SCFG_LVL;
> +		parent_irq_type = IRQ_TYPE_LEVEL_HIGH;
> +		break;
> +	case IRQ_TYPE_EDGE_RISING:
> +		parent_irq_type = IRQ_TYPE_EDGE_RISING;
> +		break;
> +	case IRQ_TYPE_EDGE_FALLING:
> +		tmp |= MCHP_EIC_SCFG_POL;
> +		parent_irq_type = IRQ_TYPE_EDGE_RISING;
> +		break;
> +	default:
> +		return -EINVAL;
> +	}
> +
> +	writel_relaxed(tmp, eic->base + MCHP_EIC_SCFG(d->hwirq));
> +
> +	return irq_chip_set_type_parent(d, parent_irq_type);
> +}
> +
> +static int mchp_eic_irq_set_wake(struct irq_data *d, unsigned int on)
> +{
> +	struct mchp_eic *eic = irq_data_get_irq_chip_data(d);
> +
> +	irq_set_irq_wake(eic->irqs[d->hwirq], on);
> +	if (on)
> +		eic->wakeup_source |= BIT(d->hwirq);
> +	else
> +		eic->wakeup_source &= ~BIT(d->hwirq);
> +
> +	return 0;
> +}
> +
> +static struct irq_chip mchp_eic_chip = {
> +	.name		= "eic",
> +	.flags		= IRQCHIP_MASK_ON_SUSPEND | IRQCHIP_SET_TYPE_MASKED,
> +	.irq_mask	= mchp_eic_irq_mask,
> +	.irq_unmask	= mchp_eic_irq_unmask,
> +	.irq_set_type	= mchp_eic_irq_set_type,
> +	.irq_ack	= irq_chip_ack_parent,
> +	.irq_eoi	= irq_chip_eoi_parent,
> +	.irq_retrigger	= irq_chip_retrigger_hierarchy,
> +	.irq_set_wake	= mchp_eic_irq_set_wake,
> +};
> +
> +static int mchp_eic_domain_translate(struct irq_domain *d,
> +				     struct irq_fwspec *fwspec,
> +				     unsigned long *hwirq,
> +				     unsigned int *type)
> +{
> +	if (!is_of_node(fwspec->fwnode))
> +		return -EINVAL;
> +
> +	if (fwspec->param_count != 2 || fwspec->param[0] >= MCHP_EIC_NIRQ)
> +		return -EINVAL;
> +
> +	*hwirq = fwspec->param[0];
> +	*type = fwspec->param[1];
> +
> +	return 0;
> +}

Which is pretty much irq_domain_translate_twocell(). Please use that.

> +
> +static int mchp_eic_domain_alloc(struct irq_domain *domain, unsigned int virq,
> +				 unsigned int nr_irqs, void *data)
> +{
> +	struct mchp_eic *eic = domain->host_data;
> +	struct irq_fwspec *fwspec = data;
> +	struct irq_fwspec parent_fwspec;
> +	irq_hw_number_t hwirq;
> +	unsigned int type;
> +	int ret;
> +
> +	if (WARN_ON(nr_irqs != 1))
> +		return -EINVAL;
> +
> +	ret = mchp_eic_domain_translate(domain, fwspec, &hwirq, &type);
> +	if (ret)
> +		return ret;
> +
> +	switch (type) {
> +	case IRQ_TYPE_EDGE_RISING:
> +	case IRQ_TYPE_LEVEL_HIGH:
> +		break;
> +	case IRQ_TYPE_EDGE_FALLING:
> +		type = IRQ_TYPE_EDGE_RISING;
> +		break;
> +	case IRQ_TYPE_LEVEL_LOW:
> +		type = IRQ_TYPE_LEVEL_HIGH;
> +		break;
> +	default:
> +		return -EINVAL;
> +	}
> +
> +	irq_domain_set_hwirq_and_chip(domain, virq, hwirq, &mchp_eic_chip, eic);
> +
> +	parent_fwspec.fwnode = domain->parent->fwnode;
> +	parent_fwspec.param_count = 3;
> +	parent_fwspec.param[0] = GIC_SPI;
> +	parent_fwspec.param[1] = eic->irqs[hwirq];
> +	parent_fwspec.param[2] = type;
> +
> +	return irq_domain_alloc_irqs_parent(domain, virq, 1, &parent_fwspec);
> +}
> +
> +static const struct irq_domain_ops mchp_eic_domain_ops = {
> +	.translate	= mchp_eic_domain_translate,
> +	.alloc		= mchp_eic_domain_alloc,
> +	.free		= irq_domain_free_irqs_common,
> +};
> +
> +static int mchp_eic_probe(struct platform_device *pdev)
> +{
> +	struct irq_domain *parent_domain = NULL;
> +	struct device *dev = &pdev->dev;
> +	struct device_node *np = dev->of_node;
> +	struct device_node *gic_node;
> +	struct mchp_eic *eic;
> +	int ret, i;
> +
> +	eic = devm_kzalloc(dev, sizeof(*eic), GFP_KERNEL);
> +	if (!eic)
> +		return -ENOMEM;
> +
> +	eic->base = devm_platform_get_and_ioremap_resource(pdev, 0, NULL);
> +	if (IS_ERR(eic->base))
> +		return PTR_ERR(eic->base);
> +
> +	gic_node = of_irq_find_parent(np);
> +	if (gic_node)
> +		parent_domain = irq_find_host(gic_node);
> +	of_node_put(gic_node);
> +	if (!parent_domain)
> +		return -ENODEV;
> +
> +	eic->clk = devm_clk_get(dev, NULL);
> +	if (IS_ERR(eic->clk))
> +		return PTR_ERR(eic->clk);
> +
> +	ret = clk_prepare_enable(eic->clk);
> +	if (ret)
> +		return ret;
> +
> +	for (i = 0; i < MCHP_EIC_NIRQ; i++) {
> +		struct of_phandle_args irq;
> +
> +		/* Disable it, if any. */
> +		writel_relaxed(0UL, eic->base + MCHP_EIC_SCFG(i));
> +
> +		ret = of_irq_parse_one(np, i, &irq);
> +		if (ret)
> +			goto clk_unprepare;
> +
> +		if (WARN_ON(irq.args_count != 3)) {
> +			ret = -EINVAL;
> +			goto clk_unprepare;
> +		}
> +
> +		eic->irqs[i] = irq.args[1];
> +	}
> +
> +	eic->domain = irq_domain_add_hierarchy(parent_domain, 0, MCHP_EIC_NIRQ,
> +					       np, &mchp_eic_domain_ops, eic);
> +	if (!eic->domain) {
> +		ret = dev_err_probe(dev, -ENOMEM, "Failed to add domain\n");
> +		goto clk_unprepare;
> +	}
> +
> +	eic->dev = dev;
> +	platform_set_drvdata(pdev, eic);
> +
> +	dev_info(dev, "EIC registered, nr_irqs %u\n", MCHP_EIC_NIRQ);
> +
> +	return 0;
> +
> +clk_unprepare:
> +	clk_disable_unprepare(eic->clk);
> +	return ret;
> +}
> +
> +static int __maybe_unused mchp_eic_suspend(struct device *dev)
> +{
> +	struct mchp_eic *eic = dev_get_drvdata(dev);
> +	unsigned int hwirq;
> +
> +	for (hwirq = 0; hwirq < MCHP_EIC_NIRQ; hwirq++)
> +		eic->scfg[hwirq] = readl_relaxed(eic->base +
> +						 MCHP_EIC_SCFG(hwirq));
> +
> +	if (!eic->wakeup_source)
> +		clk_disable_unprepare(eic->clk);
> +
> +	return 0;
> +}
> +
> +static int __maybe_unused mchp_eic_resume(struct device *dev)
> +{
> +	struct mchp_eic *eic = dev_get_drvdata(dev);
> +	unsigned int hwirq;
> +
> +	if (!eic->wakeup_source)
> +		clk_prepare_enable(eic->clk);
> +
> +	for (hwirq = 0; hwirq < MCHP_EIC_NIRQ; hwirq++)
> +		writel_relaxed(eic->scfg[hwirq], eic->base +
> +			       MCHP_EIC_SCFG(hwirq));
> +
> +	return 0;
> +}
> +
> +static const struct dev_pm_ops mchp_eic_pm_ops = {
> +	SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(mchp_eic_suspend, mchp_eic_resume)
> +};
> +
> +static const struct of_device_id mchp_eic_dt_ids[] = {
> +	{ .compatible = "microchip,sama7g5-eic", },
> +	{ },
> +};
> +MODULE_DEVICE_TABLE(of, mchp_eic_dt_ids);
> +
> +static struct platform_driver mchp_eic_device_driver = {
> +	.probe		= mchp_eic_probe,
> +	.driver		= {
> +		.name = "mchp-eic",
> +		.of_match_table = of_match_ptr(mchp_eic_dt_ids),
> +		.pm = pm_ptr(&mchp_eic_pm_ops),
> +	},
> +};
> +builtin_platform_driver(mchp_eic_device_driver);

Please use the

IRQCHIP_PLATFORM_DRIVER_BEGIN()
IRQCHIP_MATCH()
IRQCHIP_PLATFORM_DRIVER_END()

construct instead. See drivers/irqchip/qcom-pdc.c for an example. It
will at the very least avoid exposing the unbind attribute that will
lead to an explosion if touched.

Thanks,

	M.

-- 
Without deviation from the norm, progress is not possible.

  reply	other threads:[~2021-09-20 12:55 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-09-10  6:06 [PATCH v3 0/2] irqchip/mchp-eic: add driver for Microchip EIC Claudiu Beznea
2021-09-10  6:06 ` Claudiu Beznea
2021-09-10  6:06 ` [PATCH v3 1/2] dt-bindings: microchip,eic: add bindings Claudiu Beznea
2021-09-10  6:06   ` Claudiu Beznea
2021-09-21 17:45   ` Rob Herring
2021-09-21 17:45     ` Rob Herring
2021-09-10  6:06 ` [PATCH v3 2/2] irqchip/mchp-eic: add support Claudiu Beznea
2021-09-10  6:06   ` Claudiu Beznea
2021-09-20 12:53   ` Marc Zyngier [this message]
2021-09-20 12:53     ` Marc Zyngier
  -- strict thread matches above, loose matches on Subject: below --
2021-09-24 16:28 [PATCH v3 0/2] irqchip/mchp-eic: add driver for Microchip EIC Claudiu Beznea
2021-09-24 16:28 ` [PATCH v3 2/2] irqchip/mchp-eic: add support Claudiu Beznea
2021-09-24 16:28   ` Claudiu Beznea

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=87r1djv26j.wl-maz@kernel.org \
    --to=maz@kernel.org \
    --cc=claudiu.beznea@microchip.com \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=tglx@linutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.