From: Andreas Schwab <schwab@linux-m68k.org>
To: linuxppc-dev@ozlabs.org
Subject: windfarm_fcu_controls: cpu-pump-0 <HW FAULT>
Date: Fri, 02 Aug 2013 21:08:25 +0200 [thread overview]
Message-ID: <87r4eb52s6.fsf@igel.home> (raw)
wf_fcu_fan_get_rpm is returning EFAULT when reading the values for the
cpu pump controls on the PowerMac7,3. Also, wf_fcu_get_pump_minmax is
unable to get the real limits and falls back to using the defaults.
Here is the output when DEBUG is defined:
wf_fcu: FCU Initialized, RPM fan shift is 3
Looking up FCU controls in device-tree...
control: rpm0, type: fan-rpm-control
matching location: CPU B PUMP, reg: 0x00000010
location match, name: cpu-pump-1
wf_fcu: pump min/max for cpu-pump-1 set to: [1250..3200] RPM
wf_pm72: Liquid cooling pump(s) detected, using new algorithm !
control: rpm1, type: fan-rpm-control
matching location: CPU A PUMP, reg: 0x00000012
location match, name: cpu-pump-0
wf_fcu: pump min/max for cpu-pump-0 set to: [1250..3200] RPM
control: rpm2, type: fan-rpm-control
matching location: DRIVE BAY, reg: 0x00000014
location match, name: drive-bay-fan
wf_fcu: fan min/max for drive-bay-fan set to: [300..7000] RPM
control: rpm3, type: fan-rpm-control
matching location: CPU A INTAKE, reg: 0x00000016
location match, name: cpu-front-fan-0
wf_fcu: fan min/max for cpu-front-fan-0 set to: [300..3200] RPM
control: rpm4, type: fan-rpm-control
matching location: CPU A EXHAUST, reg: 0x00000018
location match, name: cpu-rear-fan-0
wf_fcu: fan min/max for cpu-rear-fan-0 set to: [300..3200] RPM
control: rpm5, type: fan-rpm-control
matching location: CPU B INTAKE, reg: 0x0000001a
location match, name: cpu-front-fan-1
wf_fcu: fan min/max for cpu-front-fan-1 set to: [300..3200] RPM
control: rpm6, type: fan-rpm-control
matching location: CPU B EXHAUST, reg: 0x0000001c
location match, name: cpu-rear-fan-1
wf_fcu: fan min/max for cpu-rear-fan-1 set to: [300..3200] RPM
control: pwm1, type: fan-pwm-control
matching location: BACKSIDE, reg: 0x00000032
location match, name: backside-fan
control: pwm2, type: fan-pwm-control
matching location: SLOT, reg: 0x00000034
location match, name: slots-fan
control: adc0, type: power-sensor
control: adc1, type: power-sensor
control: adc2, type: power-sensor
control: adc3, type: power-sensor
control: gpi0, type: gpi-sensor
control: gpi1, type: gpi-sensor
Andreas.
--
Andreas Schwab, schwab@linux-m68k.org
GPG Key fingerprint = 58CA 54C7 6D53 942B 1756 01D3 44D5 214B 8276 4ED5
"And now for something completely different."
next reply other threads:[~2013-08-02 19:08 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-08-02 19:08 Andreas Schwab [this message]
2013-08-02 22:10 ` windfarm_fcu_controls: cpu-pump-0 <HW FAULT> Benjamin Herrenschmidt
[not found] ` <1375481448.15999.47.camel__48019.1930350431$1375481501$gmane$org@pasglop>
2013-08-03 8:43 ` Andreas Schwab
2013-08-03 8:44 ` Benjamin Herrenschmidt
[not found] ` <1375519493.15999.83.camel__49452.0221990117$1375519543$gmane$org@pasglop>
2013-08-03 13:49 ` Andreas Schwab
2013-08-04 2:20 ` Benjamin Herrenschmidt
[not found] ` <87r4eahoka.fsf__2165.9838072539$1375537818$gmane$org@igel.home>
2013-08-03 14:33 ` Andreas Schwab
2013-08-04 2:21 ` Benjamin Herrenschmidt
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87r4eb52s6.fsf@igel.home \
--to=schwab@linux-m68k.org \
--cc=linuxppc-dev@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.