All of lore.kernel.org
 help / color / mirror / Atom feed
From: Marc Zyngier <maz@kernel.org>
To: Michal Simek <michal.simek@xilinx.com>
Cc: linux-kernel@vger.kernel.org, monstr@monstr.eu, git@xilinx.com,
	Robert Hancock <robert.hancock@calian.com>,
	Stefan Asserhall <stefan.asserhall@xilinx.com>,
	Thomas Gleixner <tglx@linutronix.de>,
	linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH] irqchip: xilinx: Enable generic irq multi handler
Date: Thu, 03 Mar 2022 17:24:02 +0000	[thread overview]
Message-ID: <87sfrz0x1p.wl-maz@kernel.org> (raw)
In-Reply-To: <2a08d6c33e95d5da5d564ed3fbddc835983ef355.1646323896.git.michal.simek@xilinx.com>

On Thu, 03 Mar 2022 16:11:39 +0000,
Michal Simek <michal.simek@xilinx.com> wrote:
> 
> Register default arch handler via driver instead of directly pointing to
> xilinx intc controller. This patch makes architecture code more generic.
> 
> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
> Reviewed-by: Stefan Asserhall <stefan.asserhall@xilinx.com>
> ---
> 
>  arch/microblaze/Kconfig           |  2 ++
>  arch/microblaze/include/asm/irq.h |  3 ---
>  arch/microblaze/kernel/irq.c      | 16 +---------------
>  drivers/irqchip/irq-xilinx-intc.c | 22 +++++++++++++++++++++-
>  4 files changed, 24 insertions(+), 19 deletions(-)
> 
> diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig
> index 59798e43cdb0..da568e981604 100644
> --- a/arch/microblaze/Kconfig
> +++ b/arch/microblaze/Kconfig
> @@ -45,6 +45,8 @@ config MICROBLAZE
>  	select SET_FS
>  	select ZONE_DMA
>  	select TRACE_IRQFLAGS_SUPPORT
> +	select GENERIC_IRQ_MULTI_HANDLER
> +	select HANDLE_DOMAIN_IRQ
>  
>  # Endianness selection
>  choice
> diff --git a/arch/microblaze/include/asm/irq.h b/arch/microblaze/include/asm/irq.h
> index 0a28e80bbab0..cb6ab55d1d01 100644
> --- a/arch/microblaze/include/asm/irq.h
> +++ b/arch/microblaze/include/asm/irq.h
> @@ -11,7 +11,4 @@
>  struct pt_regs;
>  extern void do_IRQ(struct pt_regs *regs);
>  
> -/* should be defined in each interrupt controller driver */
> -extern unsigned int xintc_get_irq(void);
> -
>  #endif /* _ASM_MICROBLAZE_IRQ_H */
> diff --git a/arch/microblaze/kernel/irq.c b/arch/microblaze/kernel/irq.c
> index 903dad822fad..1f8cb4c4f74f 100644
> --- a/arch/microblaze/kernel/irq.c
> +++ b/arch/microblaze/kernel/irq.c
> @@ -20,27 +20,13 @@
>  #include <linux/irqchip.h>
>  #include <linux/of_irq.h>
>  
> -static u32 concurrent_irq;
> -
>  void __irq_entry do_IRQ(struct pt_regs *regs)
>  {
> -	unsigned int irq;
>  	struct pt_regs *old_regs = set_irq_regs(regs);
>  	trace_hardirqs_off();
>  
>  	irq_enter();
> -	irq = xintc_get_irq();
> -next_irq:
> -	BUG_ON(!irq);
> -	generic_handle_irq(irq);
> -
> -	irq = xintc_get_irq();
> -	if (irq != -1U) {
> -		pr_debug("next irq: %d\n", irq);
> -		++concurrent_irq;
> -		goto next_irq;
> -	}
> -
> +	handle_arch_irq(regs);
>  	irq_exit();
>  	set_irq_regs(old_regs);
>  	trace_hardirqs_on();
> diff --git a/drivers/irqchip/irq-xilinx-intc.c b/drivers/irqchip/irq-xilinx-intc.c
> index 356a59755d63..c6710190c152 100644
> --- a/drivers/irqchip/irq-xilinx-intc.c
> +++ b/drivers/irqchip/irq-xilinx-intc.c
> @@ -110,7 +110,7 @@ static struct irq_chip intc_dev = {
>  	.irq_mask_ack = intc_mask_ack,
>  };
>  
> -unsigned int xintc_get_irq(void)
> +static unsigned int xintc_get_irq(void)
>  {
>  	unsigned int irq = -1;
>  	u32 hwirq;
> @@ -164,6 +164,25 @@ static void xil_intc_irq_handler(struct irq_desc *desc)
>  	chained_irq_exit(chip, desc);
>  }
>  
> +static u32 concurrent_irq;

Please kill this. It serves no purpose at all.

> +
> +static void xil_intc_handle_irq(struct pt_regs *regs)
> +{
> +	unsigned int irq;
> +
> +	irq = xintc_get_irq();
> +next_irq:
> +	BUG_ON(!irq);
> +	generic_handle_irq(irq);
> +
> +	irq = xintc_get_irq();
> +	if (irq != -1U) {
> +		pr_debug("next irq: %d\n", irq);
> +		++concurrent_irq;
> +		goto next_irq;
> +	}

How about writing this in (basic) C code, and use the exiting APIs?

diff --git a/drivers/irqchip/irq-xilinx-intc.c b/drivers/irqchip/irq-xilinx-intc.c
index 356a59755d63..18125bb841b2 100644
--- a/drivers/irqchip/irq-xilinx-intc.c
+++ b/drivers/irqchip/irq-xilinx-intc.c
@@ -110,18 +110,19 @@ static struct irq_chip intc_dev = {
 	.irq_mask_ack = intc_mask_ack,
 };
 
-unsigned int xintc_get_irq(void)
+#define SPURIOUS_IRQ	(-1U)
+
+static void xil_intc_handle_irq(struct pt_regs *regs)
 {
-	unsigned int irq = -1;
 	u32 hwirq;
 
-	hwirq = xintc_read(primary_intc, IVR);
-	if (hwirq != -1U)
-		irq = irq_find_mapping(primary_intc->root_domain, hwirq);
-
-	pr_debug("irq-xilinx: hwirq=%d, irq=%d\n", hwirq, irq);
+	do {
+		hwirq = xintc_read(primary_intc, IVR);
+		if (unlikely(hwirq == SPURIOUS_IRQ))
+			break;
 
-	return irq;
+		generic_handle_domain_irq(primary_intc->root_domain, hwirq);
+	} while (true);
 }
 
 static int xintc_map(struct irq_domain *d, unsigned int irq, irq_hw_number_t hw)

	M.

-- 
Without deviation from the norm, progress is not possible.

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

WARNING: multiple messages have this Message-ID (diff)
From: Marc Zyngier <maz@kernel.org>
To: Michal Simek <michal.simek@xilinx.com>
Cc: linux-kernel@vger.kernel.org, monstr@monstr.eu, git@xilinx.com,
	Robert Hancock <robert.hancock@calian.com>,
	Stefan Asserhall <stefan.asserhall@xilinx.com>,
	Thomas Gleixner <tglx@linutronix.de>,
	linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH] irqchip: xilinx: Enable generic irq multi handler
Date: Thu, 03 Mar 2022 17:24:02 +0000	[thread overview]
Message-ID: <87sfrz0x1p.wl-maz@kernel.org> (raw)
In-Reply-To: <2a08d6c33e95d5da5d564ed3fbddc835983ef355.1646323896.git.michal.simek@xilinx.com>

On Thu, 03 Mar 2022 16:11:39 +0000,
Michal Simek <michal.simek@xilinx.com> wrote:
> 
> Register default arch handler via driver instead of directly pointing to
> xilinx intc controller. This patch makes architecture code more generic.
> 
> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
> Reviewed-by: Stefan Asserhall <stefan.asserhall@xilinx.com>
> ---
> 
>  arch/microblaze/Kconfig           |  2 ++
>  arch/microblaze/include/asm/irq.h |  3 ---
>  arch/microblaze/kernel/irq.c      | 16 +---------------
>  drivers/irqchip/irq-xilinx-intc.c | 22 +++++++++++++++++++++-
>  4 files changed, 24 insertions(+), 19 deletions(-)
> 
> diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig
> index 59798e43cdb0..da568e981604 100644
> --- a/arch/microblaze/Kconfig
> +++ b/arch/microblaze/Kconfig
> @@ -45,6 +45,8 @@ config MICROBLAZE
>  	select SET_FS
>  	select ZONE_DMA
>  	select TRACE_IRQFLAGS_SUPPORT
> +	select GENERIC_IRQ_MULTI_HANDLER
> +	select HANDLE_DOMAIN_IRQ
>  
>  # Endianness selection
>  choice
> diff --git a/arch/microblaze/include/asm/irq.h b/arch/microblaze/include/asm/irq.h
> index 0a28e80bbab0..cb6ab55d1d01 100644
> --- a/arch/microblaze/include/asm/irq.h
> +++ b/arch/microblaze/include/asm/irq.h
> @@ -11,7 +11,4 @@
>  struct pt_regs;
>  extern void do_IRQ(struct pt_regs *regs);
>  
> -/* should be defined in each interrupt controller driver */
> -extern unsigned int xintc_get_irq(void);
> -
>  #endif /* _ASM_MICROBLAZE_IRQ_H */
> diff --git a/arch/microblaze/kernel/irq.c b/arch/microblaze/kernel/irq.c
> index 903dad822fad..1f8cb4c4f74f 100644
> --- a/arch/microblaze/kernel/irq.c
> +++ b/arch/microblaze/kernel/irq.c
> @@ -20,27 +20,13 @@
>  #include <linux/irqchip.h>
>  #include <linux/of_irq.h>
>  
> -static u32 concurrent_irq;
> -
>  void __irq_entry do_IRQ(struct pt_regs *regs)
>  {
> -	unsigned int irq;
>  	struct pt_regs *old_regs = set_irq_regs(regs);
>  	trace_hardirqs_off();
>  
>  	irq_enter();
> -	irq = xintc_get_irq();
> -next_irq:
> -	BUG_ON(!irq);
> -	generic_handle_irq(irq);
> -
> -	irq = xintc_get_irq();
> -	if (irq != -1U) {
> -		pr_debug("next irq: %d\n", irq);
> -		++concurrent_irq;
> -		goto next_irq;
> -	}
> -
> +	handle_arch_irq(regs);
>  	irq_exit();
>  	set_irq_regs(old_regs);
>  	trace_hardirqs_on();
> diff --git a/drivers/irqchip/irq-xilinx-intc.c b/drivers/irqchip/irq-xilinx-intc.c
> index 356a59755d63..c6710190c152 100644
> --- a/drivers/irqchip/irq-xilinx-intc.c
> +++ b/drivers/irqchip/irq-xilinx-intc.c
> @@ -110,7 +110,7 @@ static struct irq_chip intc_dev = {
>  	.irq_mask_ack = intc_mask_ack,
>  };
>  
> -unsigned int xintc_get_irq(void)
> +static unsigned int xintc_get_irq(void)
>  {
>  	unsigned int irq = -1;
>  	u32 hwirq;
> @@ -164,6 +164,25 @@ static void xil_intc_irq_handler(struct irq_desc *desc)
>  	chained_irq_exit(chip, desc);
>  }
>  
> +static u32 concurrent_irq;

Please kill this. It serves no purpose at all.

> +
> +static void xil_intc_handle_irq(struct pt_regs *regs)
> +{
> +	unsigned int irq;
> +
> +	irq = xintc_get_irq();
> +next_irq:
> +	BUG_ON(!irq);
> +	generic_handle_irq(irq);
> +
> +	irq = xintc_get_irq();
> +	if (irq != -1U) {
> +		pr_debug("next irq: %d\n", irq);
> +		++concurrent_irq;
> +		goto next_irq;
> +	}

How about writing this in (basic) C code, and use the exiting APIs?

diff --git a/drivers/irqchip/irq-xilinx-intc.c b/drivers/irqchip/irq-xilinx-intc.c
index 356a59755d63..18125bb841b2 100644
--- a/drivers/irqchip/irq-xilinx-intc.c
+++ b/drivers/irqchip/irq-xilinx-intc.c
@@ -110,18 +110,19 @@ static struct irq_chip intc_dev = {
 	.irq_mask_ack = intc_mask_ack,
 };
 
-unsigned int xintc_get_irq(void)
+#define SPURIOUS_IRQ	(-1U)
+
+static void xil_intc_handle_irq(struct pt_regs *regs)
 {
-	unsigned int irq = -1;
 	u32 hwirq;
 
-	hwirq = xintc_read(primary_intc, IVR);
-	if (hwirq != -1U)
-		irq = irq_find_mapping(primary_intc->root_domain, hwirq);
-
-	pr_debug("irq-xilinx: hwirq=%d, irq=%d\n", hwirq, irq);
+	do {
+		hwirq = xintc_read(primary_intc, IVR);
+		if (unlikely(hwirq == SPURIOUS_IRQ))
+			break;
 
-	return irq;
+		generic_handle_domain_irq(primary_intc->root_domain, hwirq);
+	} while (true);
 }
 
 static int xintc_map(struct irq_domain *d, unsigned int irq, irq_hw_number_t hw)

	M.

-- 
Without deviation from the norm, progress is not possible.

  parent reply	other threads:[~2022-03-03 17:25 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-03-03 16:11 [PATCH] irqchip: xilinx: Enable generic irq multi handler Michal Simek
2022-03-03 16:11 ` Michal Simek
2022-03-03 17:01 ` Robert Hancock
2022-03-03 17:01   ` Robert Hancock
2022-03-04  6:58   ` Michal Simek
2022-03-04  6:58     ` Michal Simek
2022-03-03 17:24 ` Marc Zyngier [this message]
2022-03-03 17:24   ` Marc Zyngier
2022-03-04  7:51   ` Michal Simek
2022-03-04  7:51     ` Michal Simek

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=87sfrz0x1p.wl-maz@kernel.org \
    --to=maz@kernel.org \
    --cc=git@xilinx.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=michal.simek@xilinx.com \
    --cc=monstr@monstr.eu \
    --cc=robert.hancock@calian.com \
    --cc=stefan.asserhall@xilinx.com \
    --cc=tglx@linutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.