[BUG] FL1009: xHCI host not responding to stop endpoint command.

[arno@natisbad.org (Arnaud Ebalard)]

Hi Sarah,

Sarah Sharp <sarah.a.sharp@linux.intel.com> writes:

>> > Can you pinpoint the commit that introduced the regression?
>> 
>> f5182b4155b9d686c5540a6822486400e34ddd98 "xhci: Disable MSI for some Fresco Logic hosts."
>> 
>> Technically, this is not per se the commit which introduced the
>> regression but the one that *partially* fixed it by introducing the XHCI
>> quirk to skip MSI enabling for Fresco Logic chips. The thing is it
>> should have included the FL1009 in the targets. Sarah, can you confirm
>> this?
>
> I don't know if it should have included FL1009, it was just a guess,
> based on the fact that the 0x1000 and 0x1400 devices did need MSI
> disabled.  I can attempt to ask the Fresco Logic folks I know, but I'm
> not sure if/when I'll get a response back.
>
> That still doesn't necessarily rule out MSI issues in the Marvell PCI
> host controller code.  Can you attach another PCI device with MSI
> support under the host and see if it works?

The various Armada-based devices I have are NAS which do not have PCIe
slots to plug additional devices (everything is soldered). I don't know
which device Thomas used for its tests. Just in case, I also added Willy
in CC: who have various boards and may also have done more test with
additional PCIe devices and CONFIG_PCI_MSI enabled on 3.13 kernel.

Cheers,

a+