[PATCH] ath10k: read qcom,coexist-support as a u32

[PATCH] ath10k: read qcom,coexist-support as a u32

[Vincent Tremblay]

Read qcom,coexist-support as a u32 instead of a u8

When we set the property to <1> in the DT (as specified in the doc),
"of_property_read_u8" read 0 instead of 1. This is because of the data format. 

By default <1> is written with 32 bits. 
The problem is that the driver is trying to read a u8.

The difference can be visualized using hexdump in a running device:
Default 32 bits output:
=======================
0000000 0000 0100
0000004

8 bits output:
==============
0000000 0001
0000001

By changing "of_property_read_u8" by "of_property_read_u32", the driver
is aligned with the documentation and is able to read the value without
modifying the DT.

The other solution would be to force the value in the DT to be saved as
an 8 bits value (qcom,coexist-support = /bits/ 8 <1>), 
which is against the doc and less intuitive.

Validation:
===========
The patch was tested on a real device and we can see in the debug logs
that the feature is properly initialized:

[  109.102097] ath10k_ahb a000000.wifi: boot coex_support 1 coex_gpio_pin 52

Signed-off-by: Vincent Tremblay <vincent@vtremblay.dev>
---
 drivers/net/wireless/ath/ath10k/core.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index 5eb131ab916f..802d6a12dc1e 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -2355,14 +2355,14 @@ static int ath10k_download_cal_data(struct ath10k *ar)
 static void ath10k_core_fetch_btcoex_dt(struct ath10k *ar)
 {
 	struct device_node *node;
-	u8 coex_support = 0;
+	u32 coex_support = 0;
 	int ret;
 
 	node = ar->dev->of_node;
 	if (!node)
 		goto out;
 
-	ret = of_property_read_u8(node, "qcom,coexist-support", &coex_support);
+	ret = of_property_read_u32(node, "qcom,coexist-support", &coex_support);
 	if (ret) {
 		ar->coex_support = true;
 		goto out;
-- 
2.37.2


_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

Re: [PATCH] ath10k: read qcom,coexist-support as a u32

[Vincent Tremblay]

Hi,

This is just a small bump to be sure that this patch does not go
unnoticed as it was submitted during the holidays.

Thanks!

_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

Re: [PATCH] ath10k: read qcom,coexist-support as a u32

[Kalle Valo]

Vincent Tremblay <vincent@vtremblay.dev> writes:

> This is just a small bump to be sure that this patch does not go
> unnoticed as it was submitted during the holidays.

I couldn't find your patch from patchwork:

https://patchwork.kernel.org/project/linux-wireless/list/?series=&submitter=&state=*&q=ath10k&archive=&delegate=

Basically if the patch is not on patchwork the maintainers won't see it.
Please resubmit as v2 and cc linux-wireless, more info here:

https://wireless.wiki.kernel.org/en/users/drivers/ath10k/submittingpatches

Also please add "wifi:" to the title.

-- 
https://patchwork.kernel.org/project/linux-wireless/list/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches

_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k