[Intel-gfx] [PATCH v4 00/15] drm/i915/dsi: enable DSC

[Intel-gfx] [PATCH v4 00/15] drm/i915/dsi: enable DSC

[Jani Nikula]

v4 of https://patchwork.freedesktop.org/series/69540/

Added patches 7 and 14 (by Vandita) to improve state checking. We may
still need to improve the checks for horizontal timings due to potential
round-trip errors, but we're progressing. Otherwise mostly unchanged
from v3.

BR,
Jani.


Jani Nikula (14):
  drm/i915/bios: pass devdata to parse_ddi_port
  drm/i915/bios: parse compression parameters block
  drm/i915/bios: add support for querying DSC details for encoder
  drm/i915/dsc: move DP specific compute params to intel_dp.c
  drm/i915/dsc: move slice height calculation to encoder
  drm/i915/dsc: add support for computing and writing PPS for DSI
    encoders
  drm/i915/dsc: add basic hardware state readout support
  drm/i915/dsi: set pipe_bpp on ICL configure config
  drm/i915/dsi: abstract afe_clk calculation
  drm/i915/dsi: use afe_clk() instead of intel_dsi_bitrate()
  drm/i915/dsi: take compression into account in afe_clk()
  drm/i915/dsi: use compressed pixel format with DSC
  drm/i915/dsi: account for DSC in horizontal timings
  drm/i915/dsi: add support for DSC

Vandita Kulkarni (1):
  drm/i915/dsi: Fix state mismatch warns for horizontal timings with DSC

 drivers/gpu/drm/i915/display/icl_dsi.c        | 198 ++++++++++++++----
 drivers/gpu/drm/i915/display/intel_bios.c     | 167 ++++++++++++++-
 drivers/gpu/drm/i915/display/intel_bios.h     |   5 +
 drivers/gpu/drm/i915/display/intel_ddi.c      |   2 +
 drivers/gpu/drm/i915/display/intel_display.c  |   4 +
 drivers/gpu/drm/i915/display/intel_dp.c       |  59 +++++-
 drivers/gpu/drm/i915/display/intel_vbt_defs.h |   2 +-
 drivers/gpu/drm/i915/display/intel_vdsc.c     | 120 +++++------
 drivers/gpu/drm/i915/display/intel_vdsc.h     |   2 +
 9 files changed, 451 insertions(+), 108 deletions(-)

-- 
2.20.1

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[Intel-gfx] [PATCH v4 01/15] drm/i915/bios: pass devdata to parse_ddi_port

[Jani Nikula]

Allow accessing the parent structure later on. Drop const for allowing
future modification as well.

Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
---
 drivers/gpu/drm/i915/display/intel_bios.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_bios.c b/drivers/gpu/drm/i915/display/intel_bios.c
index 1aeecdd02293..307e347c4a17 100644
--- a/drivers/gpu/drm/i915/display/intel_bios.c
+++ b/drivers/gpu/drm/i915/display/intel_bios.c
@@ -1554,9 +1554,10 @@ static enum port dvo_port_to_port(u8 dvo_port)
 }
 
 static void parse_ddi_port(struct drm_i915_private *dev_priv,
-			   const struct child_device_config *child,
+			   struct display_device_data *devdata,
 			   u8 bdb_version)
 {
+	const struct child_device_config *child = &devdata->child;
 	struct ddi_vbt_port_info *info;
 	bool is_dvi, is_hdmi, is_dp, is_edp, is_crt;
 	enum port port;
@@ -1708,7 +1709,7 @@ static void parse_ddi_port(struct drm_i915_private *dev_priv,
 
 static void parse_ddi_ports(struct drm_i915_private *dev_priv, u8 bdb_version)
 {
-	const struct display_device_data *devdata;
+	struct display_device_data *devdata;
 
 	if (!HAS_DDI(dev_priv) && !IS_CHERRYVIEW(dev_priv))
 		return;
@@ -1717,7 +1718,7 @@ static void parse_ddi_ports(struct drm_i915_private *dev_priv, u8 bdb_version)
 		return;
 
 	list_for_each_entry(devdata, &dev_priv->vbt.display_devices, node)
-		parse_ddi_port(dev_priv, &devdata->child, bdb_version);
+		parse_ddi_port(dev_priv, devdata, bdb_version);
 }
 
 static void
-- 
2.20.1

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[Intel-gfx] [PATCH v4 02/15] drm/i915/bios: parse compression parameters block

[Jani Nikula]

Check for child devices that specify compression, and store the device
specific compression parameters in the display device data struct for
later use. Warn if compression is requested but not available.

Use fairly rigid checks for compression data for starters. These can be
made more dynamic later.

Log about DSC presence in DDI port parse, though this is not universal
across platforms or port types (DSI).

v2: amended debug logging

Bspec: 29885
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
---
 drivers/gpu/drm/i915/display/intel_bios.c     | 61 ++++++++++++++++++-
 drivers/gpu/drm/i915/display/intel_vbt_defs.h |  2 +-
 2 files changed, 60 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_bios.c b/drivers/gpu/drm/i915/display/intel_bios.c
index 307e347c4a17..726516ae17ba 100644
--- a/drivers/gpu/drm/i915/display/intel_bios.c
+++ b/drivers/gpu/drm/i915/display/intel_bios.c
@@ -61,6 +61,7 @@
 /* Wrapper for VBT child device config */
 struct display_device_data {
 	struct child_device_config child;
+	struct dsc_compression_parameters_entry *dsc;
 	struct list_head node;
 };
 
@@ -1366,6 +1367,57 @@ parse_mipi_sequence(struct drm_i915_private *dev_priv,
 	memset(dev_priv->vbt.dsi.sequence, 0, sizeof(dev_priv->vbt.dsi.sequence));
 }
 
+static void
+parse_compression_parameters(struct drm_i915_private *i915,
+			     const struct bdb_header *bdb)
+{
+	const struct bdb_compression_parameters *params;
+	struct display_device_data *devdata;
+	const struct child_device_config *child;
+	u16 block_size;
+	int index;
+
+	if (bdb->version < 198)
+		return;
+
+	params = find_section(bdb, BDB_COMPRESSION_PARAMETERS);
+	if (params) {
+		/* Sanity checks */
+		if (params->entry_size != sizeof(params->data[0])) {
+			DRM_DEBUG_KMS("VBT: unsupported compression param entry size\n");
+			return;
+		}
+
+		block_size = get_blocksize(params);
+		if (block_size < sizeof(*params)) {
+			DRM_DEBUG_KMS("VBT: expected 16 compression param entries\n");
+			return;
+		}
+	}
+
+	list_for_each_entry(devdata, &i915->vbt.display_devices, node) {
+		child = &devdata->child;
+
+		if (!child->compression_enable)
+			continue;
+
+		if (!params) {
+			DRM_DEBUG_KMS("VBT: compression params not available\n");
+			continue;
+		}
+
+		if (child->compression_method_cps) {
+			DRM_DEBUG_KMS("VBT: CPS compression not supported\n");
+			continue;
+		}
+
+		index = child->compression_structure_index;
+
+		devdata->dsc = kmemdup(&params->data[index],
+				       sizeof(*devdata->dsc), GFP_KERNEL);
+	}
+}
+
 static u8 translate_iboost(u8 val)
 {
 	static const u8 mapping[] = { 1, 3, 7 }; /* See VBT spec */
@@ -1598,10 +1650,11 @@ static void parse_ddi_port(struct drm_i915_private *dev_priv,
 	if (bdb_version >= 209)
 		info->supports_tbt = child->tbt;
 
-	DRM_DEBUG_KMS("Port %c VBT info: CRT:%d DVI:%d HDMI:%d DP:%d eDP:%d LSPCON:%d USB-Type-C:%d TBT:%d\n",
+	DRM_DEBUG_KMS("Port %c VBT info: CRT:%d DVI:%d HDMI:%d DP:%d eDP:%d LSPCON:%d USB-Type-C:%d TBT:%d DSC:%d\n",
 		      port_name(port), is_crt, is_dvi, is_hdmi, is_dp, is_edp,
 		      HAS_LSPCON(dev_priv) && child->lspcon,
-		      info->supports_typec_usb, info->supports_tbt);
+		      info->supports_typec_usb, info->supports_tbt,
+		      devdata->dsc != NULL);
 
 	if (is_edp && is_dvi)
 		DRM_DEBUG_KMS("Internal DP port %c is TMDS compatible\n",
@@ -2037,6 +2090,9 @@ void intel_bios_init(struct drm_i915_private *dev_priv)
 	parse_mipi_config(dev_priv, bdb);
 	parse_mipi_sequence(dev_priv, bdb);
 
+	/* Depends on child device list */
+	parse_compression_parameters(dev_priv, bdb);
+
 	/* Further processing on pre-parsed data */
 	parse_sdvo_device_mapping(dev_priv, bdb->version);
 	parse_ddi_ports(dev_priv, bdb->version);
@@ -2060,6 +2116,7 @@ void intel_bios_driver_remove(struct drm_i915_private *dev_priv)
 
 	list_for_each_entry_safe(devdata, n, &dev_priv->vbt.display_devices, node) {
 		list_del(&devdata->node);
+		kfree(devdata->dsc);
 		kfree(devdata);
 	}
 
diff --git a/drivers/gpu/drm/i915/display/intel_vbt_defs.h b/drivers/gpu/drm/i915/display/intel_vbt_defs.h
index 98b71dc32d2a..4d0c23b29248 100644
--- a/drivers/gpu/drm/i915/display/intel_vbt_defs.h
+++ b/drivers/gpu/drm/i915/display/intel_vbt_defs.h
@@ -369,7 +369,7 @@ struct child_device_config {
 			u16 dtd_buf_ptr;			/* 161 */
 			u8 edidless_efp:1;			/* 161 */
 			u8 compression_enable:1;		/* 198 */
-			u8 compression_method:1;		/* 198 */
+			u8 compression_method_cps:1;		/* 198 */
 			u8 ganged_edp:1;			/* 202 */
 			u8 reserved0:4;
 			u8 compression_structure_index:4;	/* 198 */
-- 
2.20.1

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[Intel-gfx] [PATCH v4 03/15] drm/i915/bios: add support for querying DSC details for encoder

[Jani Nikula]

Add function for retrieving the DSC data for an encoder.

Initially, this is DSI specific, as DP does not use VBT settings for DSC
at all. It's also not very pretty.

In the future we might have a pointer from encoder to the child device,
which would make the child device list query here so much more sensible.

v3:
- use crtc_state instead of pipe_config
- return true by default from intel_bios_get_dsc_params()
- expand the comment about rc_buffer_block_size and rc_buffer_size

v2:
- make more robust, debug log errors better

Bspec: 29885
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
---
 drivers/gpu/drm/i915/display/intel_bios.c | 99 +++++++++++++++++++++++
 drivers/gpu/drm/i915/display/intel_bios.h |  5 ++
 2 files changed, 104 insertions(+)

diff --git a/drivers/gpu/drm/i915/display/intel_bios.c b/drivers/gpu/drm/i915/display/intel_bios.c
index 726516ae17ba..bd674fd355b7 100644
--- a/drivers/gpu/drm/i915/display/intel_bios.c
+++ b/drivers/gpu/drm/i915/display/intel_bios.c
@@ -29,6 +29,7 @@
 #include <drm/i915_drm.h>
 
 #include "display/intel_display.h"
+#include "display/intel_display_types.h"
 #include "display/intel_gmbus.h"
 
 #include "i915_drv.h"
@@ -2394,6 +2395,104 @@ bool intel_bios_is_dsi_present(struct drm_i915_private *dev_priv,
 	return false;
 }
 
+static void fill_dsc(struct intel_crtc_state *crtc_state,
+		     struct dsc_compression_parameters_entry *dsc,
+		     int dsc_max_bpc)
+{
+	struct drm_dsc_config *vdsc_cfg = &crtc_state->dsc.config;
+	int bpc = 8;
+
+	vdsc_cfg->dsc_version_major = dsc->version_major;
+	vdsc_cfg->dsc_version_minor = dsc->version_minor;
+
+	if (dsc->support_12bpc && dsc_max_bpc >= 12)
+		bpc = 12;
+	else if (dsc->support_10bpc && dsc_max_bpc >= 10)
+		bpc = 10;
+	else if (dsc->support_8bpc && dsc_max_bpc >= 8)
+		bpc = 8;
+	else
+		DRM_DEBUG_KMS("VBT: Unsupported BPC %d for DCS\n",
+			      dsc_max_bpc);
+
+	crtc_state->pipe_bpp = bpc * 3;
+
+	crtc_state->dsc.compressed_bpp = min(crtc_state->pipe_bpp,
+					     VBT_DSC_MAX_BPP(dsc->max_bpp));
+
+	/*
+	 * FIXME: This is ugly, and slice count should take DSC engine
+	 * throughput etc. into account.
+	 *
+	 * Also, per spec DSI supports 1, 2, 3 or 4 horizontal slices.
+	 */
+	if (dsc->slices_per_line & BIT(2)) {
+		crtc_state->dsc.slice_count = 4;
+	} else if (dsc->slices_per_line & BIT(1)) {
+		crtc_state->dsc.slice_count = 2;
+	} else {
+		/* FIXME */
+		if (!(dsc->slices_per_line & BIT(0)))
+			DRM_DEBUG_KMS("VBT: Unsupported DSC slice count for DSI\n");
+
+		crtc_state->dsc.slice_count = 1;
+	}
+
+	if (crtc_state->hw.adjusted_mode.crtc_hdisplay %
+	    crtc_state->dsc.slice_count != 0)
+		DRM_DEBUG_KMS("VBT: DSC hdisplay %d not divisible by slice count %d\n",
+			      crtc_state->hw.adjusted_mode.crtc_hdisplay,
+			      crtc_state->dsc.slice_count);
+
+	/*
+	 * FIXME: Use VBT rc_buffer_block_size and rc_buffer_size for the
+	 * implementation specific physical rate buffer size. Currently we use
+	 * the required rate buffer model size calculated in
+	 * drm_dsc_compute_rc_parameters() according to VESA DSC Annex E.
+	 *
+	 * The VBT rc_buffer_block_size and rc_buffer_size definitions
+	 * correspond to DP 1.4 DPCD offsets 0x62 and 0x63. The DP DSC
+	 * implementation should also use the DPCD (or perhaps VBT for eDP)
+	 * provided value for the buffer size.
+	 */
+
+	/* FIXME: DSI spec says bpc + 1 for this one */
+	vdsc_cfg->line_buf_depth = VBT_DSC_LINE_BUFFER_DEPTH(dsc->line_buffer_depth);
+
+	vdsc_cfg->block_pred_enable = dsc->block_prediction_enable;
+
+	vdsc_cfg->slice_height = dsc->slice_height;
+}
+
+/* FIXME: initially DSI specific */
+bool intel_bios_get_dsc_params(struct intel_encoder *encoder,
+			       struct intel_crtc_state *crtc_state,
+			       int dsc_max_bpc)
+{
+	struct drm_i915_private *i915 = to_i915(encoder->base.dev);
+	const struct display_device_data *devdata;
+	const struct child_device_config *child;
+
+	list_for_each_entry(devdata, &i915->vbt.display_devices, node) {
+		child = &devdata->child;
+
+		if (!(child->device_type & DEVICE_TYPE_MIPI_OUTPUT))
+			continue;
+
+		if (child->dvo_port - DVO_PORT_MIPIA == encoder->port) {
+			if (!devdata->dsc)
+				return false;
+
+			if (crtc_state)
+				fill_dsc(crtc_state, devdata->dsc, dsc_max_bpc);
+
+			return true;
+		}
+	}
+
+	return false;
+}
+
 /**
  * intel_bios_is_port_hpd_inverted - is HPD inverted for %port
  * @i915:	i915 device instance
diff --git a/drivers/gpu/drm/i915/display/intel_bios.h b/drivers/gpu/drm/i915/display/intel_bios.h
index 98f064828a57..d6a0c29d37ac 100644
--- a/drivers/gpu/drm/i915/display/intel_bios.h
+++ b/drivers/gpu/drm/i915/display/intel_bios.h
@@ -35,6 +35,8 @@
 #include <drm/i915_drm.h>
 
 struct drm_i915_private;
+struct intel_crtc_state;
+struct intel_encoder;
 enum port;
 
 enum intel_backlight_type {
@@ -242,5 +244,8 @@ bool intel_bios_is_port_hpd_inverted(const struct drm_i915_private *i915,
 bool intel_bios_is_lspcon_present(const struct drm_i915_private *i915,
 				  enum port port);
 enum aux_ch intel_bios_port_aux_ch(struct drm_i915_private *dev_priv, enum port port);
+bool intel_bios_get_dsc_params(struct intel_encoder *encoder,
+			       struct intel_crtc_state *crtc_state,
+			       int dsc_max_bpc);
 
 #endif /* _INTEL_BIOS_H_ */
-- 
2.20.1

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[Intel-gfx] [PATCH v4 04/15] drm/i915/dsc: move DP specific compute params to intel_dp.c

[Jani Nikula]

Turns out future DSI specific parameters aren't workable with the
approach of having the encoder specific functions in intel_vdsc.c. Make
intel_dsc_compute_params() a helper that does the encoder independent
parts, and have encoder code call it. Move intel_dsc_dp_compute_params()
to intel_dp.c as intel_dp_dsc_compute_params().

No functional changes.

v2: Rename pipe_config to crtc_state while at it.

Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
---
 drivers/gpu/drm/i915/display/intel_dp.c   | 47 +++++++++++++++++++++-
 drivers/gpu/drm/i915/display/intel_vdsc.c | 48 +----------------------
 2 files changed, 47 insertions(+), 48 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
index 5c406a0fd045..9df1d86e185f 100644
--- a/drivers/gpu/drm/i915/display/intel_dp.c
+++ b/drivers/gpu/drm/i915/display/intel_dp.c
@@ -2046,6 +2046,51 @@ static int intel_dp_dsc_compute_bpp(struct intel_dp *intel_dp, u8 dsc_max_bpc)
 	return 0;
 }
 
+#define DSC_SUPPORTED_VERSION_MIN		1
+
+static int intel_dp_dsc_compute_params(struct intel_encoder *encoder,
+				       struct intel_crtc_state *crtc_state)
+{
+	struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base);
+	struct drm_dsc_config *vdsc_cfg = &crtc_state->dsc.config;
+	u8 line_buf_depth;
+	int ret;
+
+	ret = intel_dsc_compute_params(encoder, crtc_state);
+	if (ret)
+		return ret;
+
+	vdsc_cfg->dsc_version_major =
+		(intel_dp->dsc_dpcd[DP_DSC_REV - DP_DSC_SUPPORT] &
+		 DP_DSC_MAJOR_MASK) >> DP_DSC_MAJOR_SHIFT;
+	vdsc_cfg->dsc_version_minor =
+		min(DSC_SUPPORTED_VERSION_MIN,
+		    (intel_dp->dsc_dpcd[DP_DSC_REV - DP_DSC_SUPPORT] &
+		     DP_DSC_MINOR_MASK) >> DP_DSC_MINOR_SHIFT);
+
+	vdsc_cfg->convert_rgb = intel_dp->dsc_dpcd[DP_DSC_DEC_COLOR_FORMAT_CAP - DP_DSC_SUPPORT] &
+		DP_DSC_RGB;
+
+	line_buf_depth = drm_dp_dsc_sink_line_buf_depth(intel_dp->dsc_dpcd);
+	if (!line_buf_depth) {
+		DRM_DEBUG_KMS("DSC Sink Line Buffer Depth invalid\n");
+		return -EINVAL;
+	}
+
+	if (vdsc_cfg->dsc_version_minor == 2)
+		vdsc_cfg->line_buf_depth = (line_buf_depth == DSC_1_2_MAX_LINEBUF_DEPTH_BITS) ?
+			DSC_1_2_MAX_LINEBUF_DEPTH_VAL : line_buf_depth;
+	else
+		vdsc_cfg->line_buf_depth = (line_buf_depth > DSC_1_1_MAX_LINEBUF_DEPTH_BITS) ?
+			DSC_1_1_MAX_LINEBUF_DEPTH_BITS : line_buf_depth;
+
+	vdsc_cfg->block_pred_enable =
+		intel_dp->dsc_dpcd[DP_DSC_BLK_PREDICTION_SUPPORT - DP_DSC_SUPPORT] &
+		DP_DSC_BLK_PREDICTION_IS_SUPPORTED;
+
+	return drm_dsc_compute_rc_parameters(vdsc_cfg);
+}
+
 static int intel_dp_dsc_compute_config(struct intel_dp *intel_dp,
 				       struct intel_crtc_state *pipe_config,
 				       struct drm_connector_state *conn_state,
@@ -2132,7 +2177,7 @@ static int intel_dp_dsc_compute_config(struct intel_dp *intel_dp,
 		}
 	}
 
-	ret = intel_dsc_compute_params(&dig_port->base, pipe_config);
+	ret = intel_dp_dsc_compute_params(&dig_port->base, pipe_config);
 	if (ret < 0) {
 		DRM_DEBUG_KMS("Cannot compute valid DSC parameters for Input Bpp = %d "
 			      "Compressed BPP = %d\n",
diff --git a/drivers/gpu/drm/i915/display/intel_vdsc.c b/drivers/gpu/drm/i915/display/intel_vdsc.c
index b23ba8d108db..834d665a47d2 100644
--- a/drivers/gpu/drm/i915/display/intel_vdsc.c
+++ b/drivers/gpu/drm/i915/display/intel_vdsc.c
@@ -30,8 +30,6 @@ enum COLUMN_INDEX_BPC {
 	MAX_COLUMN_INDEX
 };
 
-#define DSC_SUPPORTED_VERSION_MIN		1
-
 /* From DSC_v1.11 spec, rc_parameter_Set syntax element typically constant */
 static const u16 rc_buf_thresh[] = {
 	896, 1792, 2688, 3584, 4480, 5376, 6272, 6720, 7168, 7616,
@@ -335,45 +333,6 @@ static const struct rc_parameters *get_rc_params(u16 compressed_bpp,
 	return &rc_parameters[row_index][column_index];
 }
 
-/* Values filled from DSC Sink DPCD */
-static int intel_dsc_dp_compute_params(struct intel_encoder *encoder,
-				       struct intel_crtc_state *pipe_config)
-{
-	struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base);
-	struct drm_dsc_config *vdsc_cfg = &pipe_config->dsc.config;
-	u8 line_buf_depth;
-
-	vdsc_cfg->dsc_version_major =
-		(intel_dp->dsc_dpcd[DP_DSC_REV - DP_DSC_SUPPORT] &
-		 DP_DSC_MAJOR_MASK) >> DP_DSC_MAJOR_SHIFT;
-	vdsc_cfg->dsc_version_minor =
-		min(DSC_SUPPORTED_VERSION_MIN,
-		    (intel_dp->dsc_dpcd[DP_DSC_REV - DP_DSC_SUPPORT] &
-		     DP_DSC_MINOR_MASK) >> DP_DSC_MINOR_SHIFT);
-
-	vdsc_cfg->convert_rgb = intel_dp->dsc_dpcd[DP_DSC_DEC_COLOR_FORMAT_CAP - DP_DSC_SUPPORT] &
-		DP_DSC_RGB;
-
-	line_buf_depth = drm_dp_dsc_sink_line_buf_depth(intel_dp->dsc_dpcd);
-	if (!line_buf_depth) {
-		DRM_DEBUG_KMS("DSC Sink Line Buffer Depth invalid\n");
-		return -EINVAL;
-	}
-
-	if (vdsc_cfg->dsc_version_minor == 2)
-		vdsc_cfg->line_buf_depth = (line_buf_depth == DSC_1_2_MAX_LINEBUF_DEPTH_BITS) ?
-			DSC_1_2_MAX_LINEBUF_DEPTH_VAL : line_buf_depth;
-	else
-		vdsc_cfg->line_buf_depth = (line_buf_depth > DSC_1_1_MAX_LINEBUF_DEPTH_BITS) ?
-			DSC_1_1_MAX_LINEBUF_DEPTH_BITS : line_buf_depth;
-
-	vdsc_cfg->block_pred_enable =
-			intel_dp->dsc_dpcd[DP_DSC_BLK_PREDICTION_SUPPORT - DP_DSC_SUPPORT] &
-		DP_DSC_BLK_PREDICTION_IS_SUPPORTED;
-
-	return 0;
-}
-
 int intel_dsc_compute_params(struct intel_encoder *encoder,
 			     struct intel_crtc_state *pipe_config)
 {
@@ -381,7 +340,6 @@ int intel_dsc_compute_params(struct intel_encoder *encoder,
 	u16 compressed_bpp = pipe_config->dsc.compressed_bpp;
 	const struct rc_parameters *rc_params;
 	u8 i = 0;
-	int ret;
 
 	vdsc_cfg->pic_width = pipe_config->hw.adjusted_mode.crtc_hdisplay;
 	vdsc_cfg->pic_height = pipe_config->hw.adjusted_mode.crtc_vdisplay;
@@ -470,11 +428,7 @@ int intel_dsc_compute_params(struct intel_encoder *encoder,
 	vdsc_cfg->initial_scale_value = (vdsc_cfg->rc_model_size << 3) /
 		(vdsc_cfg->rc_model_size - vdsc_cfg->initial_offset);
 
-	ret = intel_dsc_dp_compute_params(encoder, pipe_config);
-	if (ret)
-		return ret;
-
-	return drm_dsc_compute_rc_parameters(vdsc_cfg);
+	return 0;
 }
 
 enum intel_display_power_domain
-- 
2.20.1

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[Intel-gfx] [PATCH v4 05/15] drm/i915/dsc: move slice height calculation to encoder

[Jani Nikula]

Turns out this isn't compatible with DSI, where we use the value from
VBT. No functional changes.

Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
---
 drivers/gpu/drm/i915/display/intel_dp.c   | 12 ++++++++++++
 drivers/gpu/drm/i915/display/intel_vdsc.c | 11 -----------
 2 files changed, 12 insertions(+), 11 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
index 9df1d86e185f..48689733850d 100644
--- a/drivers/gpu/drm/i915/display/intel_dp.c
+++ b/drivers/gpu/drm/i915/display/intel_dp.c
@@ -2060,6 +2060,18 @@ static int intel_dp_dsc_compute_params(struct intel_encoder *encoder,
 	if (ret)
 		return ret;
 
+	/*
+	 * Slice Height of 8 works for all currently available panels. So start
+	 * with that if pic_height is an integral multiple of 8. Eventually add
+	 * logic to try multiple slice heights.
+	 */
+	if (vdsc_cfg->pic_height % 8 == 0)
+		vdsc_cfg->slice_height = 8;
+	else if (vdsc_cfg->pic_height % 4 == 0)
+		vdsc_cfg->slice_height = 4;
+	else
+		vdsc_cfg->slice_height = 2;
+
 	vdsc_cfg->dsc_version_major =
 		(intel_dp->dsc_dpcd[DP_DSC_REV - DP_DSC_SUPPORT] &
 		 DP_DSC_MAJOR_MASK) >> DP_DSC_MAJOR_SHIFT;
diff --git a/drivers/gpu/drm/i915/display/intel_vdsc.c b/drivers/gpu/drm/i915/display/intel_vdsc.c
index 834d665a47d2..c53024dfb1ec 100644
--- a/drivers/gpu/drm/i915/display/intel_vdsc.c
+++ b/drivers/gpu/drm/i915/display/intel_vdsc.c
@@ -345,17 +345,6 @@ int intel_dsc_compute_params(struct intel_encoder *encoder,
 	vdsc_cfg->pic_height = pipe_config->hw.adjusted_mode.crtc_vdisplay;
 	vdsc_cfg->slice_width = DIV_ROUND_UP(vdsc_cfg->pic_width,
 					     pipe_config->dsc.slice_count);
-	/*
-	 * Slice Height of 8 works for all currently available panels. So start
-	 * with that if pic_height is an integral multiple of 8.
-	 * Eventually add logic to try multiple slice heights.
-	 */
-	if (vdsc_cfg->pic_height % 8 == 0)
-		vdsc_cfg->slice_height = 8;
-	else if (vdsc_cfg->pic_height % 4 == 0)
-		vdsc_cfg->slice_height = 4;
-	else
-		vdsc_cfg->slice_height = 2;
 
 	/* Gen 11 does not support YCbCr */
 	vdsc_cfg->simple_422 = false;
-- 
2.20.1

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[Intel-gfx] [PATCH v4 06/15] drm/i915/dsc: add support for computing and writing PPS for DSI encoders

[Jani Nikula]

Add DSI specific computation and transmission to display of PPS.

With hopes that this approach will work for both DP and DSI encoders.

Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
---
 drivers/gpu/drm/i915/display/intel_vdsc.c | 25 ++++++++++++++++++++++-
 1 file changed, 24 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/i915/display/intel_vdsc.c b/drivers/gpu/drm/i915/display/intel_vdsc.c
index c53024dfb1ec..7bd727129a8f 100644
--- a/drivers/gpu/drm/i915/display/intel_vdsc.c
+++ b/drivers/gpu/drm/i915/display/intel_vdsc.c
@@ -10,6 +10,7 @@
 
 #include "i915_drv.h"
 #include "intel_display_types.h"
+#include "intel_dsi.h"
 #include "intel_vdsc.h"
 
 enum ROW_INDEX_BPP {
@@ -844,6 +845,25 @@ static void intel_dsc_pps_configure(struct intel_encoder *encoder,
 	}
 }
 
+static void intel_dsc_dsi_pps_write(struct intel_encoder *encoder,
+				    const struct intel_crtc_state *crtc_state)
+{
+	const struct drm_dsc_config *vdsc_cfg = &crtc_state->dsc.config;
+	struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
+	struct mipi_dsi_device *dsi;
+	struct drm_dsc_picture_parameter_set pps;
+	enum port port;
+
+	drm_dsc_pps_payload_pack(&pps, vdsc_cfg);
+
+	for_each_dsi_port(port, intel_dsi->ports) {
+		dsi = intel_dsi->dsi_hosts[port]->device;
+
+		mipi_dsi_picture_parameter_set(dsi, &pps);
+		mipi_dsi_compression_mode(dsi, true);
+	}
+}
+
 static void intel_dsc_dp_pps_write(struct intel_encoder *encoder,
 				   const struct intel_crtc_state *crtc_state)
 {
@@ -882,7 +902,10 @@ void intel_dsc_enable(struct intel_encoder *encoder,
 
 	intel_dsc_pps_configure(encoder, crtc_state);
 
-	intel_dsc_dp_pps_write(encoder, crtc_state);
+	if (encoder->type == INTEL_OUTPUT_DSI)
+		intel_dsc_dsi_pps_write(encoder, crtc_state);
+	else
+		intel_dsc_dp_pps_write(encoder, crtc_state);
 
 	if (crtc_state->cpu_transcoder == TRANSCODER_EDP) {
 		dss_ctl1_reg = DSS_CTL1;
-- 
2.20.1

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[Intel-gfx] [PATCH v4 07/15] drm/i915/dsc: add basic hardware state readout support

[Jani Nikula]

Add basic hardware state readout for DSC, and check the most relevant
details in the state checker.

As a side effect, this should also get the power domains for the enabled
DSC on takeover, and subsequently disable DSC if it's not needed.

Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
---
 drivers/gpu/drm/i915/display/intel_ddi.c     |  2 ++
 drivers/gpu/drm/i915/display/intel_display.c |  4 +++
 drivers/gpu/drm/i915/display/intel_vdsc.c    | 36 ++++++++++++++++++++
 drivers/gpu/drm/i915/display/intel_vdsc.h    |  2 ++
 4 files changed, 44 insertions(+)

diff --git a/drivers/gpu/drm/i915/display/intel_ddi.c b/drivers/gpu/drm/i915/display/intel_ddi.c
index 3cacb1e279c1..98964d127cd1 100644
--- a/drivers/gpu/drm/i915/display/intel_ddi.c
+++ b/drivers/gpu/drm/i915/display/intel_ddi.c
@@ -4291,6 +4291,8 @@ void intel_ddi_get_config(struct intel_encoder *encoder,
 	if (WARN_ON(transcoder_is_dsi(cpu_transcoder)))
 		return;
 
+	intel_dsc_get_config(encoder, pipe_config);
+
 	temp = I915_READ(TRANS_DDI_FUNC_CTL(cpu_transcoder));
 	if (temp & TRANS_DDI_PHSYNC)
 		flags |= DRM_MODE_FLAG_PHSYNC;
diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
index 3190aa27ffdc..4fd34d2cba4f 100644
--- a/drivers/gpu/drm/i915/display/intel_display.c
+++ b/drivers/gpu/drm/i915/display/intel_display.c
@@ -13316,6 +13316,10 @@ intel_pipe_config_compare(const struct intel_crtc_state *current_config,
 	PIPE_CONF_CHECK_I(sync_mode_slaves_mask);
 	PIPE_CONF_CHECK_I(master_transcoder);
 
+	PIPE_CONF_CHECK_I(dsc.compression_enable);
+	PIPE_CONF_CHECK_I(dsc.dsc_split);
+	PIPE_CONF_CHECK_I(dsc.compressed_bpp);
+
 #undef PIPE_CONF_CHECK_X
 #undef PIPE_CONF_CHECK_I
 #undef PIPE_CONF_CHECK_BOOL
diff --git a/drivers/gpu/drm/i915/display/intel_vdsc.c b/drivers/gpu/drm/i915/display/intel_vdsc.c
index 7bd727129a8f..4c1b1c5c55ff 100644
--- a/drivers/gpu/drm/i915/display/intel_vdsc.c
+++ b/drivers/gpu/drm/i915/display/intel_vdsc.c
@@ -845,6 +845,42 @@ static void intel_dsc_pps_configure(struct intel_encoder *encoder,
 	}
 }
 
+void intel_dsc_get_config(struct intel_encoder *encoder,
+			  struct intel_crtc_state *crtc_state)
+{
+	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
+	struct drm_dsc_config *vdsc_cfg = &crtc_state->dsc.config;
+	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
+	enum transcoder cpu_transcoder = crtc_state->cpu_transcoder;
+	enum pipe pipe = crtc->pipe;
+	u32 dss_ctl1, dss_ctl2, val;
+
+	if (crtc_state->cpu_transcoder == TRANSCODER_EDP) {
+		dss_ctl1 = I915_READ(DSS_CTL1);
+		dss_ctl2 = I915_READ(DSS_CTL2);
+	} else {
+		dss_ctl1 = I915_READ(ICL_PIPE_DSS_CTL1(pipe));
+		dss_ctl2 = I915_READ(ICL_PIPE_DSS_CTL2(pipe));
+	}
+
+	crtc_state->dsc.compression_enable = dss_ctl2 & LEFT_BRANCH_VDSC_ENABLE;
+	if (!crtc_state->dsc.compression_enable)
+		return;
+
+	crtc_state->dsc.dsc_split = (dss_ctl2 & RIGHT_BRANCH_VDSC_ENABLE) &&
+		(dss_ctl1 & JOINER_ENABLE);
+
+	/* FIXME: add more state readout as needed */
+
+	/* PPS1 */
+	if (cpu_transcoder == TRANSCODER_EDP)
+		val = I915_READ(DSCA_PICTURE_PARAMETER_SET_1);
+	else
+		val = I915_READ(ICL_DSC0_PICTURE_PARAMETER_SET_1(pipe));
+	vdsc_cfg->bits_per_pixel = val;
+	crtc_state->dsc.compressed_bpp = vdsc_cfg->bits_per_pixel >> 4;
+}
+
 static void intel_dsc_dsi_pps_write(struct intel_encoder *encoder,
 				    const struct intel_crtc_state *crtc_state)
 {
diff --git a/drivers/gpu/drm/i915/display/intel_vdsc.h b/drivers/gpu/drm/i915/display/intel_vdsc.h
index 4ed2256750c3..541c28a9e158 100644
--- a/drivers/gpu/drm/i915/display/intel_vdsc.h
+++ b/drivers/gpu/drm/i915/display/intel_vdsc.h
@@ -14,6 +14,8 @@ void intel_dsc_enable(struct intel_encoder *encoder,
 void intel_dsc_disable(const struct intel_crtc_state *crtc_state);
 int intel_dsc_compute_params(struct intel_encoder *encoder,
 			     struct intel_crtc_state *pipe_config);
+void intel_dsc_get_config(struct intel_encoder *encoder,
+			  struct intel_crtc_state *crtc_state);
 enum intel_display_power_domain
 intel_dsc_power_domain(const struct intel_crtc_state *crtc_state);
 
-- 
2.20.1

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

Re: [Intel-gfx] [PATCH v4 07/15] drm/i915/dsc: add basic hardware state readout support

[Jani Nikula]

On Mon, 09 Dec 2019, Jani Nikula <jani.nikula@intel.com> wrote:
> Add basic hardware state readout for DSC, and check the most relevant
> details in the state checker.
>
> As a side effect, this should also get the power domains for the enabled
> DSC on takeover, and subsequently disable DSC if it's not needed.

This was hasty...

Need to check for source DSC support and DSC power domain power before
readout. Duh.

BR,
Jani.


>
> Cc: Manasi Navare <manasi.d.navare@intel.com>
> Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
> ---
>  drivers/gpu/drm/i915/display/intel_ddi.c     |  2 ++
>  drivers/gpu/drm/i915/display/intel_display.c |  4 +++
>  drivers/gpu/drm/i915/display/intel_vdsc.c    | 36 ++++++++++++++++++++
>  drivers/gpu/drm/i915/display/intel_vdsc.h    |  2 ++
>  4 files changed, 44 insertions(+)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_ddi.c b/drivers/gpu/drm/i915/display/intel_ddi.c
> index 3cacb1e279c1..98964d127cd1 100644
> --- a/drivers/gpu/drm/i915/display/intel_ddi.c
> +++ b/drivers/gpu/drm/i915/display/intel_ddi.c
> @@ -4291,6 +4291,8 @@ void intel_ddi_get_config(struct intel_encoder *encoder,
>  	if (WARN_ON(transcoder_is_dsi(cpu_transcoder)))
>  		return;
>  
> +	intel_dsc_get_config(encoder, pipe_config);
> +
>  	temp = I915_READ(TRANS_DDI_FUNC_CTL(cpu_transcoder));
>  	if (temp & TRANS_DDI_PHSYNC)
>  		flags |= DRM_MODE_FLAG_PHSYNC;
> diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
> index 3190aa27ffdc..4fd34d2cba4f 100644
> --- a/drivers/gpu/drm/i915/display/intel_display.c
> +++ b/drivers/gpu/drm/i915/display/intel_display.c
> @@ -13316,6 +13316,10 @@ intel_pipe_config_compare(const struct intel_crtc_state *current_config,
>  	PIPE_CONF_CHECK_I(sync_mode_slaves_mask);
>  	PIPE_CONF_CHECK_I(master_transcoder);
>  
> +	PIPE_CONF_CHECK_I(dsc.compression_enable);
> +	PIPE_CONF_CHECK_I(dsc.dsc_split);
> +	PIPE_CONF_CHECK_I(dsc.compressed_bpp);
> +
>  #undef PIPE_CONF_CHECK_X
>  #undef PIPE_CONF_CHECK_I
>  #undef PIPE_CONF_CHECK_BOOL
> diff --git a/drivers/gpu/drm/i915/display/intel_vdsc.c b/drivers/gpu/drm/i915/display/intel_vdsc.c
> index 7bd727129a8f..4c1b1c5c55ff 100644
> --- a/drivers/gpu/drm/i915/display/intel_vdsc.c
> +++ b/drivers/gpu/drm/i915/display/intel_vdsc.c
> @@ -845,6 +845,42 @@ static void intel_dsc_pps_configure(struct intel_encoder *encoder,
>  	}
>  }
>  
> +void intel_dsc_get_config(struct intel_encoder *encoder,
> +			  struct intel_crtc_state *crtc_state)
> +{
> +	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
> +	struct drm_dsc_config *vdsc_cfg = &crtc_state->dsc.config;
> +	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
> +	enum transcoder cpu_transcoder = crtc_state->cpu_transcoder;
> +	enum pipe pipe = crtc->pipe;
> +	u32 dss_ctl1, dss_ctl2, val;
> +
> +	if (crtc_state->cpu_transcoder == TRANSCODER_EDP) {
> +		dss_ctl1 = I915_READ(DSS_CTL1);
> +		dss_ctl2 = I915_READ(DSS_CTL2);
> +	} else {
> +		dss_ctl1 = I915_READ(ICL_PIPE_DSS_CTL1(pipe));
> +		dss_ctl2 = I915_READ(ICL_PIPE_DSS_CTL2(pipe));
> +	}
> +
> +	crtc_state->dsc.compression_enable = dss_ctl2 & LEFT_BRANCH_VDSC_ENABLE;
> +	if (!crtc_state->dsc.compression_enable)
> +		return;
> +
> +	crtc_state->dsc.dsc_split = (dss_ctl2 & RIGHT_BRANCH_VDSC_ENABLE) &&
> +		(dss_ctl1 & JOINER_ENABLE);
> +
> +	/* FIXME: add more state readout as needed */
> +
> +	/* PPS1 */
> +	if (cpu_transcoder == TRANSCODER_EDP)
> +		val = I915_READ(DSCA_PICTURE_PARAMETER_SET_1);
> +	else
> +		val = I915_READ(ICL_DSC0_PICTURE_PARAMETER_SET_1(pipe));
> +	vdsc_cfg->bits_per_pixel = val;
> +	crtc_state->dsc.compressed_bpp = vdsc_cfg->bits_per_pixel >> 4;
> +}
> +
>  static void intel_dsc_dsi_pps_write(struct intel_encoder *encoder,
>  				    const struct intel_crtc_state *crtc_state)
>  {
> diff --git a/drivers/gpu/drm/i915/display/intel_vdsc.h b/drivers/gpu/drm/i915/display/intel_vdsc.h
> index 4ed2256750c3..541c28a9e158 100644
> --- a/drivers/gpu/drm/i915/display/intel_vdsc.h
> +++ b/drivers/gpu/drm/i915/display/intel_vdsc.h
> @@ -14,6 +14,8 @@ void intel_dsc_enable(struct intel_encoder *encoder,
>  void intel_dsc_disable(const struct intel_crtc_state *crtc_state);
>  int intel_dsc_compute_params(struct intel_encoder *encoder,
>  			     struct intel_crtc_state *pipe_config);
> +void intel_dsc_get_config(struct intel_encoder *encoder,
> +			  struct intel_crtc_state *crtc_state);
>  enum intel_display_power_domain
>  intel_dsc_power_domain(const struct intel_crtc_state *crtc_state);

-- 
Jani Nikula, Intel Open Source Graphics Center
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[Intel-gfx] [PATCH v4 08/15] drm/i915/dsi: set pipe_bpp on ICL configure config

[Jani Nikula]

The ICL DSI pipe_bpp currently comes from
compute_baseline_pipe_bpp(). Fix it.

Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
---
 drivers/gpu/drm/i915/display/icl_dsi.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/gpu/drm/i915/display/icl_dsi.c b/drivers/gpu/drm/i915/display/icl_dsi.c
index f688207932e0..ef53ed6d3ecf 100644
--- a/drivers/gpu/drm/i915/display/icl_dsi.c
+++ b/drivers/gpu/drm/i915/display/icl_dsi.c
@@ -1286,6 +1286,11 @@ static int gen11_dsi_compute_config(struct intel_encoder *encoder,
 	else
 		pipe_config->cpu_transcoder = TRANSCODER_DSI_0;
 
+	if (intel_dsi->pixel_format == MIPI_DSI_FMT_RGB888)
+		pipe_config->pipe_bpp = 24;
+	else
+		pipe_config->pipe_bpp = 18;
+
 	pipe_config->clock_set = true;
 	pipe_config->port_clock = intel_dsi_bitrate(intel_dsi) / 5;
 
-- 
2.20.1

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[Intel-gfx] [PATCH v4 09/15] drm/i915/dsi: abstract afe_clk calculation

[Jani Nikula]

We'll make more use of it in the future.

Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
---
 drivers/gpu/drm/i915/display/icl_dsi.c | 18 +++++++++++++-----
 1 file changed, 13 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/icl_dsi.c b/drivers/gpu/drm/i915/display/icl_dsi.c
index ef53ed6d3ecf..de3743233dcb 100644
--- a/drivers/gpu/drm/i915/display/icl_dsi.c
+++ b/drivers/gpu/drm/i915/display/icl_dsi.c
@@ -301,18 +301,26 @@ static void configure_dual_link_mode(struct intel_encoder *encoder,
 	I915_WRITE(DSS_CTL1, dss_ctl1);
 }
 
+/* aka DSI 8X clock */
+static int afe_clk(struct intel_encoder *encoder)
+{
+	struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
+	int bpp;
+
+	bpp = mipi_dsi_pixel_format_to_bpp(intel_dsi->pixel_format);
+
+	return DIV_ROUND_CLOSEST(intel_dsi->pclk * bpp, intel_dsi->lane_count);
+}
+
 static void gen11_dsi_program_esc_clk_div(struct intel_encoder *encoder)
 {
 	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
 	struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
 	enum port port;
-	u32 bpp = mipi_dsi_pixel_format_to_bpp(intel_dsi->pixel_format);
-	u32 afe_clk_khz; /* 8X Clock */
+	int afe_clk_khz;
 	u32 esc_clk_div_m;
 
-	afe_clk_khz = DIV_ROUND_CLOSEST(intel_dsi->pclk * bpp,
-					intel_dsi->lane_count);
-
+	afe_clk_khz = afe_clk(encoder);
 	esc_clk_div_m = DIV_ROUND_UP(afe_clk_khz, DSI_MAX_ESC_CLK);
 
 	for_each_dsi_port(port, intel_dsi->ports) {
-- 
2.20.1

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[Intel-gfx] [PATCH v4 10/15] drm/i915/dsi: use afe_clk() instead of intel_dsi_bitrate()

[Jani Nikula]

We'll be expanding afe_clk() to take DSC into account. Switch to using
it where DSC matters. Which is really everywhere that
intel_dsi_bitrate() is currently used in ICL DSI code.

The functional difference is that we round the result closest instead of
down.

Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
---
 drivers/gpu/drm/i915/display/icl_dsi.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/icl_dsi.c b/drivers/gpu/drm/i915/display/icl_dsi.c
index de3743233dcb..d576f29cef75 100644
--- a/drivers/gpu/drm/i915/display/icl_dsi.c
+++ b/drivers/gpu/drm/i915/display/icl_dsi.c
@@ -539,7 +539,7 @@ static void gen11_dsi_setup_dphy_timings(struct intel_encoder *encoder)
 	 * leave all fields at HW default values.
 	 */
 	if (IS_GEN(dev_priv, 11)) {
-		if (intel_dsi_bitrate(intel_dsi) <= 800000) {
+		if (afe_clk(encoder) <= 800000) {
 			for_each_dsi_port(port, intel_dsi->ports) {
 				tmp = I915_READ(DPHY_TA_TIMING_PARAM(port));
 				tmp &= ~TA_SURE_MASK;
@@ -649,7 +649,7 @@ gen11_dsi_configure_transcoder(struct intel_encoder *encoder,
 			tmp |= EOTP_DISABLED;
 
 		/* enable link calibration if freq > 1.5Gbps */
-		if (intel_dsi_bitrate(intel_dsi) >= 1500 * 1000) {
+		if (afe_clk(encoder) >= 1500 * 1000) {
 			tmp &= ~LINK_CALIBRATION_MASK;
 			tmp |= CALIBRATION_ENABLED_INITIAL_ONLY;
 		}
@@ -930,7 +930,7 @@ static void gen11_dsi_setup_timeouts(struct intel_encoder *encoder)
 	 * TIME_NS = (BYTE_CLK_COUNT * 8 * 10^6)/ Bitrate
 	 * ESCAPE_CLK_COUNT  = TIME_NS/ESC_CLK_NS
 	 */
-	divisor = intel_dsi_tlpx_ns(intel_dsi) * intel_dsi_bitrate(intel_dsi) * 1000;
+	divisor = intel_dsi_tlpx_ns(intel_dsi) * afe_clk(encoder) * 1000;
 	mul = 8 * 1000000;
 	hs_tx_timeout = DIV_ROUND_UP(intel_dsi->hs_tx_timeout * mul,
 				     divisor);
@@ -1300,7 +1300,7 @@ static int gen11_dsi_compute_config(struct intel_encoder *encoder,
 		pipe_config->pipe_bpp = 18;
 
 	pipe_config->clock_set = true;
-	pipe_config->port_clock = intel_dsi_bitrate(intel_dsi) / 5;
+	pipe_config->port_clock = afe_clk(encoder) / 5;
 
 	return 0;
 }
-- 
2.20.1

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[Intel-gfx] [PATCH v4 11/15] drm/i915/dsi: take compression into account in afe_clk()

[Jani Nikula]

Pass crtc_state to afe_clk() to be able to take compression into account
in the computation. Once we enable compression, that is.

Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
---
 drivers/gpu/drm/i915/display/icl_dsi.c | 40 +++++++++++++++-----------
 1 file changed, 24 insertions(+), 16 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/icl_dsi.c b/drivers/gpu/drm/i915/display/icl_dsi.c
index d576f29cef75..5149a28a874b 100644
--- a/drivers/gpu/drm/i915/display/icl_dsi.c
+++ b/drivers/gpu/drm/i915/display/icl_dsi.c
@@ -302,17 +302,22 @@ static void configure_dual_link_mode(struct intel_encoder *encoder,
 }
 
 /* aka DSI 8X clock */
-static int afe_clk(struct intel_encoder *encoder)
+static int afe_clk(struct intel_encoder *encoder,
+		   const struct intel_crtc_state *crtc_state)
 {
 	struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
 	int bpp;
 
-	bpp = mipi_dsi_pixel_format_to_bpp(intel_dsi->pixel_format);
+	if (crtc_state->dsc.compression_enable)
+		bpp = crtc_state->dsc.compressed_bpp;
+	else
+		bpp = mipi_dsi_pixel_format_to_bpp(intel_dsi->pixel_format);
 
 	return DIV_ROUND_CLOSEST(intel_dsi->pclk * bpp, intel_dsi->lane_count);
 }
 
-static void gen11_dsi_program_esc_clk_div(struct intel_encoder *encoder)
+static void gen11_dsi_program_esc_clk_div(struct intel_encoder *encoder,
+					  const struct intel_crtc_state *crtc_state)
 {
 	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
 	struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
@@ -320,7 +325,7 @@ static void gen11_dsi_program_esc_clk_div(struct intel_encoder *encoder)
 	int afe_clk_khz;
 	u32 esc_clk_div_m;
 
-	afe_clk_khz = afe_clk(encoder);
+	afe_clk_khz = afe_clk(encoder, crtc_state);
 	esc_clk_div_m = DIV_ROUND_UP(afe_clk_khz, DSI_MAX_ESC_CLK);
 
 	for_each_dsi_port(port, intel_dsi->ports) {
@@ -498,7 +503,9 @@ static void gen11_dsi_enable_ddi_buffer(struct intel_encoder *encoder)
 	}
 }
 
-static void gen11_dsi_setup_dphy_timings(struct intel_encoder *encoder)
+static void
+gen11_dsi_setup_dphy_timings(struct intel_encoder *encoder,
+			     const struct intel_crtc_state *crtc_state)
 {
 	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
 	struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
@@ -539,7 +546,7 @@ static void gen11_dsi_setup_dphy_timings(struct intel_encoder *encoder)
 	 * leave all fields at HW default values.
 	 */
 	if (IS_GEN(dev_priv, 11)) {
-		if (afe_clk(encoder) <= 800000) {
+		if (afe_clk(encoder, crtc_state) <= 800000) {
 			for_each_dsi_port(port, intel_dsi->ports) {
 				tmp = I915_READ(DPHY_TA_TIMING_PARAM(port));
 				tmp &= ~TA_SURE_MASK;
@@ -649,7 +656,7 @@ gen11_dsi_configure_transcoder(struct intel_encoder *encoder,
 			tmp |= EOTP_DISABLED;
 
 		/* enable link calibration if freq > 1.5Gbps */
-		if (afe_clk(encoder) >= 1500 * 1000) {
+		if (afe_clk(encoder, pipe_config) >= 1500 * 1000) {
 			tmp &= ~LINK_CALIBRATION_MASK;
 			tmp |= CALIBRATION_ENABLED_INITIAL_ONLY;
 		}
@@ -915,7 +922,8 @@ static void gen11_dsi_enable_transcoder(struct intel_encoder *encoder)
 	}
 }
 
-static void gen11_dsi_setup_timeouts(struct intel_encoder *encoder)
+static void gen11_dsi_setup_timeouts(struct intel_encoder *encoder,
+				     const struct intel_crtc_state *crtc_state)
 {
 	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
 	struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
@@ -930,7 +938,7 @@ static void gen11_dsi_setup_timeouts(struct intel_encoder *encoder)
 	 * TIME_NS = (BYTE_CLK_COUNT * 8 * 10^6)/ Bitrate
 	 * ESCAPE_CLK_COUNT  = TIME_NS/ESC_CLK_NS
 	 */
-	divisor = intel_dsi_tlpx_ns(intel_dsi) * afe_clk(encoder) * 1000;
+	divisor = intel_dsi_tlpx_ns(intel_dsi) * afe_clk(encoder, crtc_state) * 1000;
 	mul = 8 * 1000000;
 	hs_tx_timeout = DIV_ROUND_UP(intel_dsi->hs_tx_timeout * mul,
 				     divisor);
@@ -966,7 +974,7 @@ static void gen11_dsi_setup_timeouts(struct intel_encoder *encoder)
 
 static void
 gen11_dsi_enable_port_and_phy(struct intel_encoder *encoder,
-			      const struct intel_crtc_state *pipe_config)
+			      const struct intel_crtc_state *crtc_state)
 {
 	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
 
@@ -983,13 +991,13 @@ gen11_dsi_enable_port_and_phy(struct intel_encoder *encoder,
 	gen11_dsi_enable_ddi_buffer(encoder);
 
 	/* setup D-PHY timings */
-	gen11_dsi_setup_dphy_timings(encoder);
+	gen11_dsi_setup_dphy_timings(encoder, crtc_state);
 
 	/* step 4h: setup DSI protocol timeouts */
-	gen11_dsi_setup_timeouts(encoder);
+	gen11_dsi_setup_timeouts(encoder, crtc_state);
 
 	/* Step (4h, 4i, 4j, 4k): Configure transcoder */
-	gen11_dsi_configure_transcoder(encoder, pipe_config);
+	gen11_dsi_configure_transcoder(encoder, crtc_state);
 
 	/* Step 4l: Gate DDI clocks */
 	if (IS_GEN(dev_priv, 11))
@@ -1036,14 +1044,14 @@ static void gen11_dsi_powerup_panel(struct intel_encoder *encoder)
 }
 
 static void gen11_dsi_pre_pll_enable(struct intel_encoder *encoder,
-				     const struct intel_crtc_state *pipe_config,
+				     const struct intel_crtc_state *crtc_state,
 				     const struct drm_connector_state *conn_state)
 {
 	/* step2: enable IO power */
 	gen11_dsi_enable_io_power(encoder);
 
 	/* step3: enable DSI PLL */
-	gen11_dsi_program_esc_clk_div(encoder);
+	gen11_dsi_program_esc_clk_div(encoder, crtc_state);
 }
 
 static void gen11_dsi_pre_enable(struct intel_encoder *encoder,
@@ -1300,7 +1308,7 @@ static int gen11_dsi_compute_config(struct intel_encoder *encoder,
 		pipe_config->pipe_bpp = 18;
 
 	pipe_config->clock_set = true;
-	pipe_config->port_clock = afe_clk(encoder) / 5;
+	pipe_config->port_clock = afe_clk(encoder, pipe_config) / 5;
 
 	return 0;
 }
-- 
2.20.1

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[Intel-gfx] [PATCH v4 12/15] drm/i915/dsi: use compressed pixel format with DSC

[Jani Nikula]

When compression is enabled, configure the DSI transcoder to use
compressed format.

Suggested-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
---
 drivers/gpu/drm/i915/display/icl_dsi.c | 36 ++++++++++++++------------
 1 file changed, 20 insertions(+), 16 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/icl_dsi.c b/drivers/gpu/drm/i915/display/icl_dsi.c
index 5149a28a874b..460759913708 100644
--- a/drivers/gpu/drm/i915/display/icl_dsi.c
+++ b/drivers/gpu/drm/i915/display/icl_dsi.c
@@ -682,22 +682,26 @@ gen11_dsi_configure_transcoder(struct intel_encoder *encoder,
 
 		/* select pixel format */
 		tmp &= ~PIX_FMT_MASK;
-		switch (intel_dsi->pixel_format) {
-		default:
-			MISSING_CASE(intel_dsi->pixel_format);
-			/* fallthrough */
-		case MIPI_DSI_FMT_RGB565:
-			tmp |= PIX_FMT_RGB565;
-			break;
-		case MIPI_DSI_FMT_RGB666_PACKED:
-			tmp |= PIX_FMT_RGB666_PACKED;
-			break;
-		case MIPI_DSI_FMT_RGB666:
-			tmp |= PIX_FMT_RGB666_LOOSE;
-			break;
-		case MIPI_DSI_FMT_RGB888:
-			tmp |= PIX_FMT_RGB888;
-			break;
+		if (pipe_config->dsc.compression_enable) {
+			tmp |= PIX_FMT_COMPRESSED;
+		} else {
+			switch (intel_dsi->pixel_format) {
+			default:
+				MISSING_CASE(intel_dsi->pixel_format);
+				/* fallthrough */
+			case MIPI_DSI_FMT_RGB565:
+				tmp |= PIX_FMT_RGB565;
+				break;
+			case MIPI_DSI_FMT_RGB666_PACKED:
+				tmp |= PIX_FMT_RGB666_PACKED;
+				break;
+			case MIPI_DSI_FMT_RGB666:
+				tmp |= PIX_FMT_RGB666_LOOSE;
+				break;
+			case MIPI_DSI_FMT_RGB888:
+				tmp |= PIX_FMT_RGB888;
+				break;
+			}
 		}
 
 		if (INTEL_GEN(dev_priv) >= 12) {
-- 
2.20.1

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[Intel-gfx] [PATCH v4 13/15] drm/i915/dsi: account for DSC in horizontal timings

[Jani Nikula]

When DSC is enabled, we need to adjust the horizontal timings to account
for the compressed (and therefore reduced) link speed.

The compressed frequency ratio simplifies down to the ratio between
compressed and non-compressed bpp.

Bspec: 49263
Suggested-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
---
 drivers/gpu/drm/i915/display/icl_dsi.c | 24 +++++++++++++++++++-----
 1 file changed, 19 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/icl_dsi.c b/drivers/gpu/drm/i915/display/icl_dsi.c
index 460759913708..caa477c4b1af 100644
--- a/drivers/gpu/drm/i915/display/icl_dsi.c
+++ b/drivers/gpu/drm/i915/display/icl_dsi.c
@@ -785,12 +785,12 @@ gen11_dsi_configure_transcoder(struct intel_encoder *encoder,
 
 static void
 gen11_dsi_set_transcoder_timings(struct intel_encoder *encoder,
-				 const struct intel_crtc_state *pipe_config)
+				 const struct intel_crtc_state *crtc_state)
 {
 	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
 	struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
 	const struct drm_display_mode *adjusted_mode =
-					&pipe_config->hw.adjusted_mode;
+		&crtc_state->hw.adjusted_mode;
 	enum port port;
 	enum transcoder dsi_trans;
 	/* horizontal timings */
@@ -798,11 +798,25 @@ gen11_dsi_set_transcoder_timings(struct intel_encoder *encoder,
 	u16 hback_porch;
 	/* vertical timings */
 	u16 vtotal, vactive, vsync_start, vsync_end, vsync_shift;
+	int mul = 1, div = 1;
+
+	/*
+	 * Adjust horizontal timings (htotal, hsync_start, hsync_end) to account
+	 * for slower link speed if DSC is enabled.
+	 *
+	 * The compression frequency ratio is the ratio between compressed and
+	 * non-compressed link speeds, and simplifies down to the ratio between
+	 * compressed and non-compressed bpp.
+	 */
+	if (crtc_state->dsc.compression_enable) {
+		mul = crtc_state->dsc.compressed_bpp;
+		div = mipi_dsi_pixel_format_to_bpp(intel_dsi->pixel_format);
+	}
 
 	hactive = adjusted_mode->crtc_hdisplay;
-	htotal = adjusted_mode->crtc_htotal;
-	hsync_start = adjusted_mode->crtc_hsync_start;
-	hsync_end = adjusted_mode->crtc_hsync_end;
+	htotal = DIV_ROUND_UP(adjusted_mode->crtc_htotal * mul, div);
+	hsync_start = DIV_ROUND_UP(adjusted_mode->crtc_hsync_start * mul, div);
+	hsync_end = DIV_ROUND_UP(adjusted_mode->crtc_hsync_end * mul, div);
 	hsync_size  = hsync_end - hsync_start;
 	hback_porch = (adjusted_mode->crtc_htotal -
 		       adjusted_mode->crtc_hsync_end);
-- 
2.20.1

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[Intel-gfx] [PATCH v4 14/15] drm/i915/dsi: Fix state mismatch warns for horizontal timings with DSC

[Jani Nikula]

From: Vandita Kulkarni <vandita.kulkarni@intel.com>

When DSC is enabled consider the compression ratio that was used during
horizontal timing calculations.

This may still lead to warns due to rounding errors in the round-trip.

v2 by Jani:
- rebase on top of the more generic dsc state readout

Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
---
 drivers/gpu/drm/i915/display/icl_dsi.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/drivers/gpu/drm/i915/display/icl_dsi.c b/drivers/gpu/drm/i915/display/icl_dsi.c
index caa477c4b1af..b1d775d834d4 100644
--- a/drivers/gpu/drm/i915/display/icl_dsi.c
+++ b/drivers/gpu/drm/i915/display/icl_dsi.c
@@ -1255,6 +1255,18 @@ static void gen11_dsi_get_timings(struct intel_encoder *encoder,
 	struct drm_display_mode *adjusted_mode =
 					&pipe_config->hw.adjusted_mode;
 
+	if (pipe_config->dsc.compressed_bpp) {
+		int div = pipe_config->dsc.compressed_bpp;
+		int mul = mipi_dsi_pixel_format_to_bpp(intel_dsi->pixel_format);
+
+		adjusted_mode->crtc_htotal =
+			DIV_ROUND_UP(adjusted_mode->crtc_htotal * mul, div);
+		adjusted_mode->crtc_hsync_start =
+			DIV_ROUND_UP(adjusted_mode->crtc_hsync_start * mul, div);
+		adjusted_mode->crtc_hsync_end =
+			DIV_ROUND_UP(adjusted_mode->crtc_hsync_end * mul, div);
+	}
+
 	if (intel_dsi->dual_link) {
 		adjusted_mode->crtc_hdisplay *= 2;
 		if (intel_dsi->dual_link == DSI_DUAL_LINK_FRONT_BACK)
-- 
2.20.1

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[Intel-gfx] [PATCH v4 15/15] drm/i915/dsi: add support for DSC

[Jani Nikula]

Enable DSC for DSI, if specified in VBT.

This still lacks DSC aware get config implementation, and therefore
state checker will fail. Also mode valid is not there yet.

v5:
- add dsc get config call

v4:
- convert_rgb = true (Vandita)
- ignore max cdclock check (Vandita)
- rename pipe_config to crtc_state

v3:
- take compressed bpp into account

v2:
- Nuke conn_state->max_requested_bpc, it's not used on DSI

Bspec: 49263
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
---
 drivers/gpu/drm/i915/display/icl_dsi.c | 69 ++++++++++++++++++++++++--
 1 file changed, 66 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/icl_dsi.c b/drivers/gpu/drm/i915/display/icl_dsi.c
index b1d775d834d4..03aa92d317a2 100644
--- a/drivers/gpu/drm/i915/display/icl_dsi.c
+++ b/drivers/gpu/drm/i915/display/icl_dsi.c
@@ -34,6 +34,7 @@
 #include "intel_ddi.h"
 #include "intel_dsi.h"
 #include "intel_panel.h"
+#include "intel_vdsc.h"
 
 static inline int header_credits_available(struct drm_i915_private *dev_priv,
 					   enum transcoder dsi_trans)
@@ -1087,6 +1088,8 @@ static void gen11_dsi_pre_enable(struct intel_encoder *encoder,
 	/* step5: program and powerup panel */
 	gen11_dsi_powerup_panel(encoder);
 
+	intel_dsc_enable(encoder, pipe_config);
+
 	/* step6c: configure transcoder timings */
 	gen11_dsi_set_transcoder_timings(encoder, pipe_config);
 
@@ -1248,6 +1251,13 @@ static void gen11_dsi_disable(struct intel_encoder *encoder,
 	gen11_dsi_disable_io_power(encoder);
 }
 
+static enum drm_mode_status gen11_dsi_mode_valid(struct drm_connector *connector,
+						 struct drm_display_mode *mode)
+{
+	/* FIXME: DSC? */
+	return intel_dsi_mode_valid(connector, mode);
+}
+
 static void gen11_dsi_get_timings(struct intel_encoder *encoder,
 				  struct intel_crtc_state *pipe_config)
 {
@@ -1294,6 +1304,8 @@ static void gen11_dsi_get_config(struct intel_encoder *encoder,
 	struct intel_crtc *crtc = to_intel_crtc(pipe_config->uapi.crtc);
 	struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
 
+	intel_dsc_get_config(encoder, pipe_config);
+
 	/* FIXME: adapt icl_ddi_clock_get() for DSI and use that? */
 	pipe_config->port_clock =
 		cnl_calc_wrpll_link(dev_priv, &pipe_config->dpll_hw_state);
@@ -1307,6 +1319,48 @@ static void gen11_dsi_get_config(struct intel_encoder *encoder,
 	pipe_config->pipe_bpp = bdw_get_pipemisc_bpp(crtc);
 }
 
+static int gen11_dsi_dsc_compute_config(struct intel_encoder *encoder,
+					struct intel_crtc_state *crtc_state)
+{
+	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
+	struct drm_dsc_config *vdsc_cfg = &crtc_state->dsc.config;
+	int dsc_max_bpc = INTEL_GEN(dev_priv) >= 12 ? 12 : 10;
+	bool use_dsc;
+	int ret;
+
+	use_dsc = intel_bios_get_dsc_params(encoder, crtc_state, dsc_max_bpc);
+	if (!use_dsc)
+		return 0;
+
+	if (crtc_state->pipe_bpp < 8 * 3)
+		return -EINVAL;
+
+	/* FIXME: split only when necessary */
+	if (crtc_state->dsc.slice_count > 1)
+		crtc_state->dsc.dsc_split = true;
+
+	vdsc_cfg->convert_rgb = true;
+
+	ret = intel_dsc_compute_params(encoder, crtc_state);
+	if (ret)
+		return ret;
+
+	/* DSI specific sanity checks on the common code */
+	WARN_ON(vdsc_cfg->vbr_enable);
+	WARN_ON(vdsc_cfg->simple_422);
+	WARN_ON(vdsc_cfg->pic_width % vdsc_cfg->slice_width);
+	WARN_ON(vdsc_cfg->slice_height < 8);
+	WARN_ON(vdsc_cfg->pic_height % vdsc_cfg->slice_height);
+
+	ret = drm_dsc_compute_rc_parameters(vdsc_cfg);
+	if (ret)
+		return ret;
+
+	crtc_state->dsc.compression_enable = true;
+
+	return 0;
+}
+
 static int gen11_dsi_compute_config(struct intel_encoder *encoder,
 				    struct intel_crtc_state *pipe_config,
 				    struct drm_connector_state *conn_state)
@@ -1338,6 +1392,10 @@ static int gen11_dsi_compute_config(struct intel_encoder *encoder,
 		pipe_config->pipe_bpp = 18;
 
 	pipe_config->clock_set = true;
+
+	if (gen11_dsi_dsc_compute_config(encoder, pipe_config))
+		DRM_DEBUG_KMS("Attempting to use DSC failed\n");
+
 	pipe_config->port_clock = afe_clk(encoder, pipe_config) / 5;
 
 	return 0;
@@ -1346,8 +1404,13 @@ static int gen11_dsi_compute_config(struct intel_encoder *encoder,
 static void gen11_dsi_get_power_domains(struct intel_encoder *encoder,
 					struct intel_crtc_state *crtc_state)
 {
-	get_dsi_io_power_domains(to_i915(encoder->base.dev),
-				 enc_to_intel_dsi(&encoder->base));
+	struct drm_i915_private *i915 = to_i915(encoder->base.dev);
+
+	get_dsi_io_power_domains(i915, enc_to_intel_dsi(&encoder->base));
+
+	if (crtc_state->dsc.compression_enable)
+		intel_display_power_get(i915,
+					intel_dsc_power_domain(crtc_state));
 }
 
 static bool gen11_dsi_get_hw_state(struct intel_encoder *encoder,
@@ -1417,7 +1480,7 @@ static const struct drm_connector_funcs gen11_dsi_connector_funcs = {
 
 static const struct drm_connector_helper_funcs gen11_dsi_connector_helper_funcs = {
 	.get_modes = intel_dsi_get_modes,
-	.mode_valid = intel_dsi_mode_valid,
+	.mode_valid = gen11_dsi_mode_valid,
 	.atomic_check = intel_digital_connector_atomic_check,
 };
 
-- 
2.20.1

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[Intel-gfx] ✗ Fi.CI.CHECKPATCH: warning for drm/i915/dsi: enable DSC (rev6)

[Patchwork]

== Series Details ==

Series: drm/i915/dsi: enable DSC (rev6)
URL   : https://patchwork.freedesktop.org/series/69540/
State : warning

== Summary ==

$ dim checkpatch origin/drm-tip
a23b05a241fc drm/i915/bios: pass devdata to parse_ddi_port
a0590902b587 drm/i915/bios: parse compression parameters block
-:107: CHECK:COMPARISON_TO_NULL: Comparison to NULL could be written "devdata->dsc"
#107: FILE: drivers/gpu/drm/i915/display/intel_bios.c:1657:
+		      devdata->dsc != NULL);

total: 0 errors, 0 warnings, 1 checks, 101 lines checked
5e0e7428b343 drm/i915/bios: add support for querying DSC details for encoder
6f03be6f86c6 drm/i915/dsc: move DP specific compute params to intel_dp.c
2609e4e50bf2 drm/i915/dsc: move slice height calculation to encoder
2cfb9e182fb0 drm/i915/dsc: add support for computing and writing PPS for DSI encoders
9d4ed96330e0 drm/i915/dsc: add basic hardware state readout support
b0563267830c drm/i915/dsi: set pipe_bpp on ICL configure config
26caeb29b90e drm/i915/dsi: abstract afe_clk calculation
4395ce411630 drm/i915/dsi: use afe_clk() instead of intel_dsi_bitrate()
770a03614ae1 drm/i915/dsi: take compression into account in afe_clk()
3665acb6aef6 drm/i915/dsi: use compressed pixel format with DSC
a7b9e220bef4 drm/i915/dsi: account for DSC in horizontal timings
ee911caff1df drm/i915/dsi: Fix state mismatch warns for horizontal timings with DSC
c1d68732ce8a drm/i915/dsi: add support for DSC

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[Intel-gfx] ✗ Fi.CI.BAT: failure for drm/i915/dsi: enable DSC (rev6)

[Patchwork]

== Series Details ==

Series: drm/i915/dsi: enable DSC (rev6)
URL   : https://patchwork.freedesktop.org/series/69540/
State : failure

== Summary ==

CI Bug Log - changes from CI_DRM_7521 -> Patchwork_15657
====================================================

Summary
-------

  **FAILURE**

  Serious unknown changes coming with Patchwork_15657 absolutely need to be
  verified manually.
  
  If you think the reported changes have nothing to do with the changes
  introduced in Patchwork_15657, please notify your bug team to allow them
  to document this new failure mode, which will reduce false positives in CI.

  External URL: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15657/index.html

Possible new issues
-------------------

  Here are the unknown changes that may have been introduced in Patchwork_15657:

### IGT changes ###

#### Possible regressions ####

  * igt@kms_chamelium@dp-crc-fast:
    - fi-icl-u2:          [PASS][1] -> [DMESG-WARN][2]
   [1]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7521/fi-icl-u2/igt@kms_chamelium@dp-crc-fast.html
   [2]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15657/fi-icl-u2/igt@kms_chamelium@dp-crc-fast.html

  * igt@kms_flip@basic-flip-vs-dpms:
    - fi-icl-u3:          [PASS][3] -> [DMESG-WARN][4]
   [3]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7521/fi-icl-u3/igt@kms_flip@basic-flip-vs-dpms.html
   [4]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15657/fi-icl-u3/igt@kms_flip@basic-flip-vs-dpms.html

  * igt@kms_force_connector_basic@force-connector-state:
    - fi-kbl-guc:         NOTRUN -> [DMESG-WARN][5]
   [5]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15657/fi-kbl-guc/igt@kms_force_connector_basic@force-connector-state.html

  * igt@runner@aborted:
    - fi-whl-u:           NOTRUN -> [FAIL][6]
   [6]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15657/fi-whl-u/igt@runner@aborted.html
    - fi-kbl-guc:         NOTRUN -> [FAIL][7]
   [7]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15657/fi-kbl-guc/igt@runner@aborted.html

  
New tests
---------

  New tests have been introduced between CI_DRM_7521 and Patchwork_15657:

### New IGT tests (22) ###

  * igt@amdgpu/amd_basic@cs-compute:
    - Statuses : 1 pass(s) 17 skip(s)
    - Exec time: [0.0, 0.03] s

  * igt@amdgpu/amd_basic@cs-gfx:
    - Statuses : 1 pass(s) 17 skip(s)
    - Exec time: [0.0, 0.04] s

  * igt@amdgpu/amd_basic@cs-multi-fence:
    - Statuses : 1 pass(s) 17 skip(s)
    - Exec time: [0.0, 0.00] s

  * igt@amdgpu/amd_basic@cs-sdma:
    - Statuses : 1 pass(s) 17 skip(s)
    - Exec time: [0.0, 0.02] s

  * igt@amdgpu/amd_basic@memory-alloc:
    - Statuses : 1 pass(s) 17 skip(s)
    - Exec time: [0.0, 0.00] s

  * igt@amdgpu/amd_basic@query-info:
    - Statuses : 1 pass(s) 17 skip(s)
    - Exec time: [0.0] s

  * igt@amdgpu/amd_basic@semaphore:
    - Statuses : 1 pass(s) 17 skip(s)
    - Exec time: [0.0, 0.00] s

  * igt@amdgpu/amd_basic@userptr:
    - Statuses : 1 pass(s) 17 skip(s)
    - Exec time: [0.0, 0.00] s

  * igt@amdgpu/amd_cs_nop@fork-compute0:
    - Statuses : 1 pass(s) 17 skip(s)
    - Exec time: [0.0, 21.50] s

  * igt@amdgpu/amd_cs_nop@fork-gfx0:
    - Statuses : 1 pass(s) 17 skip(s)
    - Exec time: [0.0, 21.54] s

  * igt@amdgpu/amd_cs_nop@nop-compute0:
    - Statuses : 1 pass(s) 17 skip(s)
    - Exec time: [0.0, 21.48] s

  * igt@amdgpu/amd_cs_nop@nop-gfx0:
    - Statuses : 1 pass(s) 17 skip(s)
    - Exec time: [0.0, 21.48] s

  * igt@amdgpu/amd_cs_nop@sync-compute0:
    - Statuses : 1 pass(s) 17 skip(s)
    - Exec time: [0.0, 21.48] s

  * igt@amdgpu/amd_cs_nop@sync-fork-compute0:
    - Statuses : 1 pass(s) 17 skip(s)
    - Exec time: [0.0, 21.52] s

  * igt@amdgpu/amd_cs_nop@sync-fork-gfx0:
    - Statuses : 1 pass(s) 17 skip(s)
    - Exec time: [0.0, 21.50] s

  * igt@amdgpu/amd_cs_nop@sync-gfx0:
    - Statuses : 1 pass(s) 17 skip(s)
    - Exec time: [0.0, 21.48] s

  * igt@amdgpu/amd_prime@amd-to-i915:
    - Statuses : 1 pass(s) 17 skip(s)
    - Exec time: [0.0, 2.45] s

  * igt@amdgpu/amd_prime@i915-to-amd:
    - Statuses : 1 pass(s) 17 skip(s)
    - Exec time: [0.0, 5.50] s

  * igt@gem_exec_fence@nb-await-default:
    - Statuses : 21 pass(s) 2 skip(s)
    - Exec time: [0.0, 0.08] s

  * igt@i915_module_load@reload:
    - Statuses : 18 pass(s)
    - Exec time: [1.18, 7.58] s

  * igt@i915_module_load@reload-no-display:
    - Statuses : 18 pass(s)
    - Exec time: [1.33, 6.63] s

  * igt@i915_module_load@reload-with-fault-injection:
    - Statuses : 18 pass(s)
    - Exec time: [4.78, 94.14] s

  

Known issues
------------

  Here are the changes found in Patchwork_15657 that come from known issues:

### IGT changes ###

#### Issues hit ####

  * igt@i915_selftest@live_gem_contexts:
    - fi-byt-n2820:       [PASS][8] -> [DMESG-FAIL][9] ([i915#722])
   [8]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7521/fi-byt-n2820/igt@i915_selftest@live_gem_contexts.html
   [9]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15657/fi-byt-n2820/igt@i915_selftest@live_gem_contexts.html

  
#### Possible fixes ####

  * igt@gem_ctx_create@basic-files:
    - {fi-tgl-guc}:       [INCOMPLETE][10] ([fdo#111735]) -> [PASS][11]
   [10]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7521/fi-tgl-guc/igt@gem_ctx_create@basic-files.html
   [11]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15657/fi-tgl-guc/igt@gem_ctx_create@basic-files.html

  * igt@gem_exec_suspend@basic-s4-devices:
    - fi-icl-guc:         [INCOMPLETE][12] ([i915#140] / [i915#184]) -> [PASS][13]
   [12]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7521/fi-icl-guc/igt@gem_exec_suspend@basic-s4-devices.html
   [13]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15657/fi-icl-guc/igt@gem_exec_suspend@basic-s4-devices.html

  
#### Warnings ####

  * igt@runner@aborted:
    - fi-cml-s:           [FAIL][14] ([fdo#111764] / [i915#577]) -> [FAIL][15] ([fdo#111461] / [i915#577])
   [14]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7521/fi-cml-s/igt@runner@aborted.html
   [15]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15657/fi-cml-s/igt@runner@aborted.html

  
  {name}: This element is suppressed. This means it is ignored when computing
          the status of the difference (SUCCESS, WARNING, or FAILURE).

  [fdo#111461]: https://bugs.freedesktop.org/show_bug.cgi?id=111461
  [fdo#111735]: https://bugs.freedesktop.org/show_bug.cgi?id=111735
  [fdo#111764]: https://bugs.freedesktop.org/show_bug.cgi?id=111764
  [i915#140]: https://gitlab.freedesktop.org/drm/intel/issues/140
  [i915#184]: https://gitlab.freedesktop.org/drm/intel/issues/184
  [i915#472]: https://gitlab.freedesktop.org/drm/intel/issues/472
  [i915#577]: https://gitlab.freedesktop.org/drm/intel/issues/577
  [i915#707]: https://gitlab.freedesktop.org/drm/intel/issues/707
  [i915#722]: https://gitlab.freedesktop.org/drm/intel/issues/722


Participating hosts (50 -> 46)
------------------------------

  Additional (2): fi-kbl-7560u fi-kbl-guc 
  Missing    (6): fi-ilk-m540 fi-bsw-cyan fi-ctg-p8600 fi-ivb-3770 fi-byt-clapper fi-snb-2600 


Build changes
-------------

  * CI: CI-20190529 -> None
  * Linux: CI_DRM_7521 -> Patchwork_15657

  CI-20190529: 20190529
  CI_DRM_7521: 9203f67985ebf27211aa1eabb77093302248c9fc @ git://anongit.freedesktop.org/gfx-ci/linux
  IGT_5341: 5fe683cdebde2d77d16ffc42c9fdf29a9f95bb82 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
  Patchwork_15657: c1d68732ce8ade90d738625a2a8f6f82990baeb5 @ git://anongit.freedesktop.org/gfx-ci/linux


== Linux commits ==

c1d68732ce8a drm/i915/dsi: add support for DSC
ee911caff1df drm/i915/dsi: Fix state mismatch warns for horizontal timings with DSC
a7b9e220bef4 drm/i915/dsi: account for DSC in horizontal timings
3665acb6aef6 drm/i915/dsi: use compressed pixel format with DSC
770a03614ae1 drm/i915/dsi: take compression into account in afe_clk()
4395ce411630 drm/i915/dsi: use afe_clk() instead of intel_dsi_bitrate()
26caeb29b90e drm/i915/dsi: abstract afe_clk calculation
b0563267830c drm/i915/dsi: set pipe_bpp on ICL configure config
9d4ed96330e0 drm/i915/dsc: add basic hardware state readout support
2cfb9e182fb0 drm/i915/dsc: add support for computing and writing PPS for DSI encoders
2609e4e50bf2 drm/i915/dsc: move slice height calculation to encoder
6f03be6f86c6 drm/i915/dsc: move DP specific compute params to intel_dp.c
5e0e7428b343 drm/i915/bios: add support for querying DSC details for encoder
a0590902b587 drm/i915/bios: parse compression parameters block
a23b05a241fc drm/i915/bios: pass devdata to parse_ddi_port

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15657/index.html
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx