From: "Valo, Kalle" <kvalo@qca.qualcomm.com>
To: Bruno Antunes <baantunes@gmail.com>
Cc: OpenWrt Development List <openwrt-devel@lists.openwrt.org>,
linux-wireless <linux-wireless@vger.kernel.org>,
"ath10k@lists.infradead.org" <ath10k@lists.infradead.org>,
voncken <cedric.voncken@acksys.fr>
Subject: Re: ATH10K VLAN firmware issue
Date: Fri, 4 Nov 2016 21:17:13 +0000 [thread overview]
Message-ID: <87twbnueqv.fsf@kamboji.qca.qualcomm.com> (raw)
In-Reply-To: <CABUTiXWg3t5qK6O5ooDE+4=Xk3Msybs5mu9+tQm_Bb0wdSrfWQ@mail.gmail.com> (Bruno Antunes's message of "Fri, 4 Nov 2016 14:13:29 +0000")
Bruno Antunes <baantunes@gmail.com> writes:
> Old thread but I think the issue is still present.
>
> I'm running a setup with VLANs with WDS and ath10k cards.
>
> To make it work both cards must be loaded in rawmode, AP
> and Sta, and with no security.
>
> I'm using a OpenWrt trunk r49941 and the most recent firmware,
> 10.2.4.70.58, from Kalle ath10k firmware tree.
>
> Although it works the throughput is very bad.
> Are there any alternatives to improve the throughput.
Can someone file a bug to bugzilla about this so that all the info is
properly stored? The more comprehensive the report is the better.
https://bugzilla.kernel.org/
--
Kalle Valo
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
WARNING: multiple messages have this Message-ID (diff)
From: "Valo, Kalle" <kvalo@qca.qualcomm.com>
To: Bruno Antunes <baantunes@gmail.com>
Cc: voncken <cedric.voncken@acksys.fr>,
OpenWrt Development List <openwrt-devel@lists.openwrt.org>,
linux-wireless <linux-wireless@vger.kernel.org>,
"ath10k@lists.infradead.org" <ath10k@lists.infradead.org>
Subject: Re: ATH10K VLAN firmware issue
Date: Fri, 4 Nov 2016 21:17:13 +0000 [thread overview]
Message-ID: <87twbnueqv.fsf@kamboji.qca.qualcomm.com> (raw)
In-Reply-To: <CABUTiXWg3t5qK6O5ooDE+4=Xk3Msybs5mu9+tQm_Bb0wdSrfWQ@mail.gmail.com> (Bruno Antunes's message of "Fri, 4 Nov 2016 14:13:29 +0000")
Bruno Antunes <baantunes@gmail.com> writes:
> Old thread but I think the issue is still present.
>
> I'm running a setup with VLANs with WDS and ath10k cards.
>
> To make it work both cards must be loaded in rawmode, AP
> and Sta, and with no security.
>
> I'm using a OpenWrt trunk r49941 and the most recent firmware,
> 10.2.4.70.58, from Kalle ath10k firmware tree.
>
> Although it works the throughput is very bad.
> Are there any alternatives to improve the throughput.
Can someone file a bug to bugzilla about this so that all the info is
properly stored? The more comprehensive the report is the better.
https://bugzilla.kernel.org/
--=20
Kalle Valo=
next prev parent reply other threads:[~2016-11-04 21:17 UTC|newest]
Thread overview: 54+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-12-08 14:29 ATH10K VLAN firmware issue Cedric VONCKEN
2015-12-08 14:29 ` Cedric VONCKEN
2015-12-09 15:33 ` Ben Greear
2015-12-09 15:33 ` Ben Greear
2015-12-09 17:24 ` voncken
2015-12-09 17:24 ` voncken
2016-11-04 14:13 ` Bruno Antunes
2016-11-04 14:13 ` Bruno Antunes
[not found] ` <27f802e7-79c5-a17f-1883-88e62a6520ef@ezplanet.net>
2016-11-04 14:41 ` [OpenWrt-Devel] " Bruno Antunes
2016-11-04 14:41 ` Bruno Antunes
2016-11-04 17:28 ` yu-chieh kung
2016-11-04 17:28 ` yu-chieh kung
2016-11-04 21:50 ` Ben Greear
2016-11-04 21:50 ` Ben Greear
2016-11-04 22:23 ` Ben Greear
2016-11-04 22:23 ` Ben Greear
2016-11-05 8:05 ` Sebastian Gottschall
2016-11-05 8:05 ` Sebastian Gottschall
2016-11-05 14:35 ` Ben Greear
2016-11-05 14:35 ` Ben Greear
2016-11-15 14:37 ` voncken
2016-11-15 14:37 ` voncken
2016-11-15 14:55 ` Ben Greear
2016-11-15 14:55 ` Ben Greear
2016-11-15 15:00 ` Bruno Antunes
2016-11-15 15:00 ` Bruno Antunes
2016-11-15 15:06 ` Ben Greear
2016-11-15 15:06 ` Ben Greear
2016-11-07 11:54 ` Bruno Antunes
2016-11-07 11:54 ` Bruno Antunes
2016-11-07 14:06 ` Ben Greear
2016-11-07 14:06 ` Ben Greear
2016-11-07 14:13 ` Bruno Antunes
2016-11-07 14:13 ` Bruno Antunes
2016-11-04 21:17 ` Valo, Kalle [this message]
2016-11-04 21:17 ` Valo, Kalle
2016-11-07 12:01 ` Bruno Antunes
2016-11-07 12:01 ` Bruno Antunes
2016-11-07 18:06 ` Valo, Kalle
2016-11-07 18:06 ` Valo, Kalle
2016-11-07 18:40 ` [OpenWrt-Devel] " Bruno Antunes
2016-11-07 18:40 ` Bruno Antunes
2016-11-15 13:43 ` Valo, Kalle
2016-11-15 13:43 ` Valo, Kalle
2016-11-15 14:53 ` Bruno Antunes
2016-11-15 14:53 ` Bruno Antunes
2017-02-21 12:59 ` voncken
2017-02-21 12:59 ` voncken
2017-02-21 13:19 ` Valo, Kalle
2017-02-21 13:19 ` Valo, Kalle
[not found] ` <CAKR_QVLpSWab-kF-f8=xqw+oWAfA966GDm7CtXrWfzmJz8gP-w@mail.gmail.com>
2017-02-21 16:47 ` Bruno Antunes
2017-02-21 16:47 ` Bruno Antunes
2017-02-22 13:55 ` voncken
2017-02-22 13:55 ` voncken
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87twbnueqv.fsf@kamboji.qca.qualcomm.com \
--to=kvalo@qca.qualcomm.com \
--cc=ath10k@lists.infradead.org \
--cc=baantunes@gmail.com \
--cc=cedric.voncken@acksys.fr \
--cc=linux-wireless@vger.kernel.org \
--cc=openwrt-devel@lists.openwrt.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.